[SOLVED] ata3 error

Cipher69969 · 2020-05-19 09:30:05

hello guys, i don't know how to fix the error

uname -a

Linux arch 5.6.13-arch1-1 #1 SMP PREEMPT Thu, 14 May 2020 06:52:53 +0000 x86_64 GNU/Linux

dmesg

[    0.000000] Linux version 5.6.13-arch1-1 (linux@archlinux) (gcc version 10.1.0 (GCC)) #1 SMP PREEMPT Thu, 14 May 2020 06:52:53 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1099fc18-7e43-4d05-b1b3-9b9fc03abb52 rw loglevel=3 quiet splash resume=UUID=aa79e215-83e0-480c-ac99-d38d00f31f83
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c3fecfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c3fed000-0x00000000c4d6dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c4d6e000-0x00000000c4daffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ca7bf000-0x00000000ca84cfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ca84d000-0x00000000ca84efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ca84f000-0x00000000ca861fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ca862000-0x00000000ca862fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ca863000-0x00000000ca87afff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ca87b000-0x00000000ca87bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ca87c000-0x00000000ca886fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ca887000-0x00000000ca887fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ca888000-0x00000000ca891fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ca892000-0x00000000ca892fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ca893000-0x00000000ca898fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ca899000-0x00000000ca899fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ca89a000-0x00000000ca8a7fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ca8a8000-0x00000000ca8a8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ca8a9000-0x00000000ca8b7fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ca8b8000-0x00000000ca8b8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ca8b9000-0x00000000ca8f1fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ca8f2000-0x00000000ca936fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ca937000-0x00000000ca9befff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ca9bf000-0x00000000caebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by INSYDE Corp.
[    0.000000] efi:  ACPI=0xcaffe000  ACPI 2.0=0xcaffe014  SMBIOS=0xcaebef98 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20236/INVALID, BIOS 78CN19WW(V1.07) 07/04/2013
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2594.035 MHz processor
[    0.000241] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000243] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000254] last_pfn = 0x22f600 max_arch_pfn = 0x400000000
[    0.000258] MTRR default type: uncachable
[    0.000259] MTRR fixed ranges enabled:
[    0.000260]   00000-9FFFF write-back
[    0.000261]   A0000-BFFFF uncachable
[    0.000262]   C0000-E7FFF write-protect
[    0.000262]   E8000-EFFFF write-combining
[    0.000263]   F0000-FFFFF write-protect
[    0.000264] MTRR variable ranges enabled:
[    0.000265]   0 base 000000000 mask F80000000 write-back
[    0.000266]   1 base 080000000 mask FC0000000 write-back
[    0.000267]   2 base 0C0000000 mask FF8000000 write-back
[    0.000268]   3 base 0C8000000 mask FFE000000 write-back
[    0.000268]   4 base 0CA000000 mask FFF000000 write-back
[    0.000269]   5 base 0FF800000 mask FFF800000 write-protect
[    0.000270]   6 base 100000000 mask F00000000 write-back
[    0.000271]   7 base 200000000 mask FC0000000 write-back
[    0.000272]   8 base 22F600000 mask FFFE00000 uncachable
[    0.000272]   9 base 22F800000 mask FFF800000 uncachable
[    0.000543] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000696] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[    0.011260] check: Scanning 1 areas for low memory corruption
[    0.011267] BRK [0x75c01000, 0x75c01fff] PGTABLE
[    0.011270] BRK [0x75c02000, 0x75c02fff] PGTABLE
[    0.011270] BRK [0x75c03000, 0x75c03fff] PGTABLE
[    0.011332] BRK [0x75c04000, 0x75c04fff] PGTABLE
[    0.011334] BRK [0x75c05000, 0x75c05fff] PGTABLE
[    0.011706] BRK [0x75c06000, 0x75c06fff] PGTABLE
[    0.011707] BRK [0x75c07000, 0x75c07fff] PGTABLE
[    0.012100] BRK [0x75c08000, 0x75c08fff] PGTABLE
[    0.012220] BRK [0x75c09000, 0x75c09fff] PGTABLE
[    0.012433] BRK [0x75c0a000, 0x75c0afff] PGTABLE
[    0.012554] BRK [0x75c0b000, 0x75c0bfff] PGTABLE
[    0.012659] BRK [0x75c0c000, 0x75c0cfff] PGTABLE
[    0.012779] Secure boot could not be determined
[    0.012780] RAMDISK: [mem 0x36daf000-0x376cefff]
[    0.012785] ACPI: Early table checksum verification disabled
[    0.012788] ACPI: RSDP 0x00000000CAFFE014 000024 (v02 LENOVO)
[    0.012791] ACPI: XSDT 0x00000000CAFFE210 0000A4 (v01 LENOVO CB-01    00000001      01000013)
[    0.012797] ACPI: FACP 0x00000000CAFFA000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012802] ACPI: DSDT 0x00000000CAFEC000 00A06F (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012805] ACPI: FACS 0x00000000CAFBB000 000040
[    0.012808] ACPI: SLIC 0x00000000CAFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012811] ACPI: UEFI 0x00000000CAFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012813] ACPI: ASF! 0x00000000CAFFB000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012816] ACPI: HPET 0x00000000CAFF9000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012819] ACPI: APIC 0x00000000CAFF8000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012822] ACPI: MCFG 0x00000000CAFF7000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012825] ACPI: SSDT 0x00000000CAFEB000 0006FE (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012828] ACPI: BOOT 0x00000000CAFE9000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012831] ACPI: ASPT 0x00000000CAFE7000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012833] ACPI: DBGP 0x00000000CAFE6000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012836] ACPI: FPDT 0x00000000CAFE4000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012839] ACPI: MSDM 0x00000000CAFE3000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012842] ACPI: SSDT 0x00000000CAFE2000 0009AA (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012844] ACPI: SSDT 0x00000000CAFE1000 000B22 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012847] ACPI: BGRT 0x00000000CAFE0000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.012855] ACPI: Local APIC address 0xfee00000
[    0.012898] No NUMA configuration found
[    0.012899] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
[    0.012903] NODE_DATA(0) allocated [mem 0x22f5f6000-0x22f5f9fff]
[    0.012932] Zone ranges:
[    0.012933]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012934]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.012935]   Normal   [mem 0x0000000100000000-0x000000022f5fffff]
[    0.012936]   Device   empty
[    0.012937] Movable zone start for each node
[    0.012937] Early memory node ranges
[    0.012938]   node   0: [mem 0x0000000000001000-0x0000000000087fff]
[    0.012939]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.012940]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.012940]   node   0: [mem 0x0000000040005000-0x00000000c3fecfff]
[    0.012941]   node   0: [mem 0x00000000c4d6e000-0x00000000c4daffff]
[    0.012942]   node   0: [mem 0x00000000c61b0000-0x00000000ca7befff]
[    0.012943]   node   0: [mem 0x00000000cafff000-0x00000000caffffff]
[    0.012943]   node   0: [mem 0x0000000100000000-0x000000022f5fffff]
[    0.013264] Zeroed struct page in unavailable ranges: 34363 pages
[    0.013265] Initmem setup node 0 [mem 0x0000000000001000-0x000000022f5fffff]
[    0.013267] On node 0 totalpages: 2062789
[    0.013268]   DMA zone: 64 pages used for memmap
[    0.013268]   DMA zone: 25 pages reserved
[    0.013269]   DMA zone: 3975 pages, LIFO batch:0
[    0.013339]   DMA32 zone: 12753 pages used for memmap
[    0.013340]   DMA32 zone: 816190 pages, LIFO batch:63
[    0.027291]   Normal zone: 19416 pages used for memmap
[    0.027292]   Normal zone: 1242624 pages, LIFO batch:63
[    0.047277] Reserving Intel graphics memory at [mem 0xcba00000-0xcf9fffff]
[    0.047450] ACPI: PM-Timer IO Port: 0x408
[    0.047452] ACPI: Local APIC address 0xfee00000
[    0.047469] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.047472] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.047474] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.047475] ACPI: IRQ0 used by override.
[    0.047476] ACPI: IRQ9 used by override.
[    0.047478] Using ACPI (MADT) for SMP configuration information
[    0.047480] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.047489] e820: update [mem 0xc6fde000-0xc7058fff] usable ==> reserved
[    0.047503] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.047553] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.047556] PM: hibernation: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.047556] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.047558] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.047560] PM: hibernation: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.047563] PM: hibernation: Registered nosave memory: [mem 0xc3fed000-0xc4d6dfff]
[    0.047565] PM: hibernation: Registered nosave memory: [mem 0xc4db0000-0xc61affff]
[    0.047567] PM: hibernation: Registered nosave memory: [mem 0xc6fde000-0xc7058fff]
[    0.047569] PM: hibernation: Registered nosave memory: [mem 0xca7bf000-0xca84cfff]
[    0.047570] PM: hibernation: Registered nosave memory: [mem 0xca84d000-0xca84efff]
[    0.047570] PM: hibernation: Registered nosave memory: [mem 0xca84f000-0xca861fff]
[    0.047571] PM: hibernation: Registered nosave memory: [mem 0xca862000-0xca862fff]
[    0.047571] PM: hibernation: Registered nosave memory: [mem 0xca863000-0xca87afff]
[    0.047572] PM: hibernation: Registered nosave memory: [mem 0xca87b000-0xca87bfff]
[    0.047572] PM: hibernation: Registered nosave memory: [mem 0xca87c000-0xca886fff]
[    0.047573] PM: hibernation: Registered nosave memory: [mem 0xca887000-0xca887fff]
[    0.047573] PM: hibernation: Registered nosave memory: [mem 0xca888000-0xca891fff]
[    0.047574] PM: hibernation: Registered nosave memory: [mem 0xca892000-0xca892fff]
[    0.047575] PM: hibernation: Registered nosave memory: [mem 0xca893000-0xca898fff]
[    0.047575] PM: hibernation: Registered nosave memory: [mem 0xca899000-0xca899fff]
[    0.047576] PM: hibernation: Registered nosave memory: [mem 0xca89a000-0xca8a7fff]
[    0.047576] PM: hibernation: Registered nosave memory: [mem 0xca8a8000-0xca8a8fff]
[    0.047577] PM: hibernation: Registered nosave memory: [mem 0xca8a9000-0xca8b7fff]
[    0.047577] PM: hibernation: Registered nosave memory: [mem 0xca8b8000-0xca8b8fff]
[    0.047578] PM: hibernation: Registered nosave memory: [mem 0xca8b9000-0xca8f1fff]
[    0.047579] PM: hibernation: Registered nosave memory: [mem 0xca8f2000-0xca936fff]
[    0.047579] PM: hibernation: Registered nosave memory: [mem 0xca937000-0xca9befff]
[    0.047580] PM: hibernation: Registered nosave memory: [mem 0xca9bf000-0xcaebefff]
[    0.047580] PM: hibernation: Registered nosave memory: [mem 0xcaebf000-0xcafbefff]
[    0.047581] PM: hibernation: Registered nosave memory: [mem 0xcafbf000-0xcaffefff]
[    0.047583] PM: hibernation: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
[    0.047584] PM: hibernation: Registered nosave memory: [mem 0xcfa00000-0xefffffff]
[    0.047584] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.047585] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[    0.047585] PM: hibernation: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.047586] PM: hibernation: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.047586] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.047587] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.047588] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.047588] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.047589] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.047589] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.047590] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.047590] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[    0.047591] PM: hibernation: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[    0.047593] [mem 0xcfa00000-0xefffffff] available for PCI devices
[    0.047594] Booting paravirtualized kernel on bare hardware
[    0.047597] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.052096] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.052354] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
[    0.052364] pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
[    0.052365] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.052393] Built 1 zonelists, mobility grouping on.  Total pages: 2030531
[    0.052394] Policy zone: Normal
[    0.052395] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1099fc18-7e43-4d05-b1b3-9b9fc03abb52 rw loglevel=3 quiet splash resume=UUID=aa79e215-83e0-480c-ac99-d38d00f31f83
[    0.052890] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.053096] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.053197] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[    0.077973] Memory: 7940528K/8251156K available (12291K kernel code, 1463K rwdata, 4464K rodata, 1608K init, 3184K bss, 310628K reserved, 0K cma-reserved)
[    0.077980] random: get_random_u64 called from __kmem_cache_create+0x3e/0x610 with crng_init=0
[    0.078107] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.078120] Kernel/User page tables isolation: enabled
[    0.078137] ftrace: allocating 39095 entries in 153 pages
[    0.092345] ftrace: allocated 153 pages with 4 groups
[    0.092460] rcu: Preemptible hierarchical RCU implementation.
[    0.092460] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.092461] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.092462] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.092463] 	Tasks RCU enabled.
[    0.092464] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.092464] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.095499] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.095737] Console: colour dummy device 80x25
[    0.095742] printk: console [tty0] enabled
[    0.095759] ACPI: Core revision 20200110
[    0.095898] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.095912] APIC: Switch to symmetric I/O mode setup
[    0.095982] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.096428] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.112580] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2564391333a, max_idle_ns: 440795276634 ns
[    0.112584] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.23 BogoMIPS (lpj=8646783)
[    0.112587] pid_max: default: 32768 minimum: 301
[    0.120785] LSM: Security Framework initializing
[    0.120791] Yama: becoming mindful.
[    0.120822] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.120834] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.120848] *** VALIDATE tmpfs ***
[    0.120996] *** VALIDATE proc ***
[    0.121046] *** VALIDATE cgroup ***
[    0.121047] *** VALIDATE cgroup2 ***
[    0.121094] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.121104] process: using mwait in idle threads
[    0.121106] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.121107] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.121111] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.121113] Spectre V2 : Mitigation: Full generic retpoline
[    0.121113] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.121114] Speculative Store Bypass: Vulnerable
[    0.121116] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.121335] Freeing SMP alternatives memory: 32K
[    0.122665] TSC deadline timer enabled
[    0.122668] smpboot: CPU0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.142598] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.142610] ... version:                3
[    0.142611] ... bit width:              48
[    0.142612] ... generic registers:      4
[    0.142614] ... value mask:             0000ffffffffffff
[    0.142615] ... max period:             00007fffffffffff
[    0.142616] ... fixed-purpose events:   3
[    0.142617] ... event mask:             000000070000000f
[    0.149255] rcu: Hierarchical SRCU implementation.
[    0.172769] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.179260] smp: Bringing up secondary CPUs ...
[    0.219284] x86: Booting SMP configuration:
[    0.219286] .... node  #0, CPUs:      #1
[    0.221605] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.259283]  #2 #3
[    0.301832] smp: Brought up 1 node, 4 CPUs
[    0.301832] smpboot: Max logical packages: 2
[    0.301832] smpboot: Total of 4 processors activated (20760.95 BogoMIPS)
[    0.302855] devtmpfs: initialized
[    0.302855] x86/mm: Memory block size: 128MB
[    0.303390] PM: Registering ACPI NVS region [mem 0xcaebf000-0xcafbefff] (1048576 bytes)
[    0.303390] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.303390] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.303390] pinctrl core: initialized pinctrl subsystem
[    0.303390] PM: RTC time: 08:46:09, date: 2020-05-19
[    0.303390] thermal_sys: Registered thermal governor 'fair_share'
[    0.303390] thermal_sys: Registered thermal governor 'bang_bang'
[    0.303390] thermal_sys: Registered thermal governor 'step_wise'
[    0.303390] thermal_sys: Registered thermal governor 'user_space'
[    0.303390] thermal_sys: Registered thermal governor 'power_allocator'
[    0.303390] NET: Registered protocol family 16
[    0.303390] audit: initializing netlink subsys (disabled)
[    0.303390] audit: type=2000 audit(1589877968.206:1): state=initialized audit_enabled=0 res=1
[    0.303390] cpuidle: using governor ladder
[    0.305929] cpuidle: using governor menu
[    0.305985] Simple Boot Flag at 0x44 set to 0x1
[    0.305999] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.306000] ACPI: bus type PCI registered
[    0.306001] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.306065] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.306080] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.306089] PCI: Using configuration type 1 for base access
[    0.306124] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.306429] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.309282] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.309368] ACPI: Added _OSI(Module Device)
[    0.309369] ACPI: Added _OSI(Processor Device)
[    0.309370] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.309371] ACPI: Added _OSI(Processor Aggregator Device)
[    0.309372] ACPI: Added _OSI(Linux-Dell-Video)
[    0.309373] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.309374] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.320448] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.322076] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.322802] ACPI: Dynamic OEM Table Load:
[    0.322809] ACPI: SSDT 0xFFFF8C37E58E5000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20120111)
[    0.323891] ACPI: Dynamic OEM Table Load:
[    0.323896] ACPI: SSDT 0xFFFF8C37E58EB000 000303 (v01 PmRef  ApIst    00003000 INTL 20120111)
[    0.324735] ACPI: Dynamic OEM Table Load:
[    0.324739] ACPI: SSDT 0xFFFF8C37E5A2B000 000119 (v01 PmRef  ApCst    00003000 INTL 20120111)
[    0.326452] ACPI: EC: EC started
[    0.326452] ACPI: EC: interrupt blocked
[    0.326653] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.326655] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.326656] ACPI: Interpreter enabled
[    0.326682] ACPI: (supports S0 S3 S4 S5)
[    0.326683] ACPI: Using IOAPIC for interrupt routing
[    0.326714] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.327045] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.334634] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.334640] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.334846] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.335361] PCI host bridge to bus 0000:00
[    0.335364] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.335365] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.335366] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.335367] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.335368] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.335369] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.335371] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.335372] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.335373] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.335374] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.335375] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.335376] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.335377] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.335378] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.335379] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.335380] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
[    0.335381] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.335391] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.335496] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.335507] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[    0.335513] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.335518] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.335530] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.335674] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.335699] pci 0000:00:14.0: reg 0x10: [mem 0xe0600000-0xe060ffff 64bit]
[    0.335771] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.335877] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.335902] pci 0000:00:16.0: reg 0x10: [mem 0xe0614000-0xe061400f 64bit]
[    0.335982] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.336079] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.336101] pci 0000:00:1a.0: reg 0x10: [mem 0xe0619000-0xe06193ff]
[    0.336186] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.336292] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.336315] pci 0000:00:1b.0: reg 0x10: [mem 0xe0610000-0xe0613fff 64bit]
[    0.336392] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.336497] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.336597] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.336706] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.336805] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.336918] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.336941] pci 0000:00:1d.0: reg 0x10: [mem 0xe0618000-0xe06183ff]
[    0.337026] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.337128] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.337327] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.337345] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.337353] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.337361] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.337368] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.337376] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.337384] pci 0000:00:1f.2: reg 0x24: [mem 0xe0617000-0xe06177ff]
[    0.337426] pci 0000:00:1f.2: PME# supported from D3hot
[    0.337521] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.337540] pci 0000:00:1f.3: reg 0x10: [mem 0xe0615000-0xe06150ff 64bit]
[    0.337561] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.337781] pci 0000:01:00.0: [1969:10a0] type 00 class 0x020000
[    0.337934] pci 0000:01:00.0: reg 0x10: [mem 0xe0500000-0xe053ffff 64bit]
[    0.337986] pci 0000:01:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.338503] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.338846] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.338850] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.338854] pci 0000:00:1c.0:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.338951] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
[    0.338997] pci 0000:02:00.0: reg 0x10: [mem 0xe0400000-0xe0407fff 64bit]
[    0.339074] pci 0000:02:00.0: enabling Extended Tags
[    0.339181] pci 0000:02:00.0: supports D1 D2
[    0.339182] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.339365] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.339371] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.399726] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.399806] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.399885] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.399962] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.400039] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.400117] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.400194] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.400271] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.400450] ACPI: EC: interrupt unblocked
[    0.400459] ACPI: EC: event unblocked
[    0.400465] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.400466] ACPI: EC: GPE=0x17
[    0.400469] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.400533] iommu: Default domain type: Translated 
[    0.402598] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.402598] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.402598] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.402598] vgaarb: loaded
[    0.402774] SCSI subsystem initialized
[    0.402789] libata version 3.00 loaded.
[    0.402789] ACPI: bus type USB registered
[    0.402789] usbcore: registered new interface driver usbfs
[    0.402789] usbcore: registered new interface driver hub
[    0.402789] usbcore: registered new device driver usb
[    0.402789] pps_core: LinuxPPS API ver. 1 registered
[    0.402789] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.402789] PTP clock support registered
[    0.402789] EDAC MC: Ver: 3.0.0
[    0.402789] Registered efivars operations
[    0.402789] PCI: Using ACPI for IRQ routing
[    0.404176] PCI: pci_cache_line_size set to 64 bytes
[    0.404253] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.404255] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.404255] e820: reserve RAM buffer [mem 0xc3fed000-0xc3ffffff]
[    0.404256] e820: reserve RAM buffer [mem 0xc4db0000-0xc7ffffff]
[    0.404257] e820: reserve RAM buffer [mem 0xc6fde000-0xc7ffffff]
[    0.404258] e820: reserve RAM buffer [mem 0xca7bf000-0xcbffffff]
[    0.404261] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[    0.404262] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
[    0.404378] NetLabel: Initializing
[    0.404378] NetLabel:  domain hash size = 128
[    0.404379] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.404392] NetLabel:  unlabeled traffic allowed by default
[    0.404396] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.404396] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.405918] clocksource: Switched to clocksource tsc-early
[    0.418066] *** VALIDATE bpf ***
[    0.418161] VFS: Disk quotas dquot_6.6.0
[    0.418176] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.418206] *** VALIDATE ramfs ***
[    0.418210] *** VALIDATE hugetlbfs ***
[    0.418246] pnp: PnP ACPI init
[    0.418407] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.418408] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.418410] system 00:00: [io  0xffff] has been reserved
[    0.418411] system 00:00: [io  0xffff] has been reserved
[    0.418412] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.418413] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.418415] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.418416] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.418417] system 00:00: [io  0xfd60-0xfd63] has been reserved
[    0.418423] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.418449] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.418510] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.418514] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.418539] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.418603] pnp 00:04: Plug and Play ACPI device, IDs SYN2b13 SYN0700 SYN0002 PNP0f13 (active)
[    0.476130] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.476131] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.476133] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.476134] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.476136] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.476137] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.476138] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.476139] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[    0.476141] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[    0.476143] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.476144] system 00:05: [mem 0xcfa00000-0xcfa00fff] has been reserved
[    0.476148] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.476620] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.476621] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[    0.476625] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.476649] pnp: PnP ACPI: found 7 devices
[    0.482399] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.482434] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.482438] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.482443] pci 0000:00:1c.0:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.482452] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.482456] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.482465] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.482467] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.482468] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.482469] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.482470] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.482471] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.482472] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.482473] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.482474] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.482475] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.482477] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.482478] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.482479] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.482480] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.482481] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.482482] pci_bus 0000:00: resource 19 [mem 0xcfa00000-0xfeafffff window]
[    0.482483] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.482484] pci_bus 0000:01: resource 1 [mem 0xe0500000-0xe05fffff]
[    0.482485] pci_bus 0000:02: resource 1 [mem 0xe0400000-0xe04fffff]
[    0.482610] NET: Registered protocol family 2
[    0.482740] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.482782] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.482932] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.483012] TCP: Hash tables configured (established 65536 bind 65536)
[    0.483069] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.483093] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.483186] NET: Registered protocol family 1
[    0.483191] NET: Registered protocol family 44
[    0.483202] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    2.185931] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    2.186231] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6d5 took 1661679 usecs
[    3.852598] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    3.852792] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6d5 took 1627484 usecs
[    3.852806] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag
[    3.852833] PCI: CLS 64 bytes, default 64
[    3.852879] Trying to unpack rootfs image as initramfs...
[    3.986409] Freeing initrd memory: 9344K
[    3.986418] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.986420] software IO TLB: mapped [mem 0xbf1c0000-0xc31c0000] (64MB)
[    3.986596] check: Scanning for low memory corruption every 60 seconds
[    3.986956] Initialise system trusted keyrings
[    3.986965] Key type blacklist registered
[    3.987014] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    3.988188] zbud: loaded
[    3.993505] Key type asymmetric registered
[    3.993507] Asymmetric key parser 'x509' registered
[    3.993518] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    3.993570] io scheduler mq-deadline registered
[    3.993571] io scheduler kyber registered
[    3.993602] io scheduler bfq registered
[    3.994179] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.994248] efifb: probing for efifb
[    3.994267] efifb: showing boot graphics
[    3.995068] efifb: framebuffer at 0xd0000000, using 4160k, total 4160k
[    3.995069] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    3.995069] efifb: scrolling: redraw
[    3.995070] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    3.995119] fbcon: Deferring console take-over
[    3.995120] fb0: EFI VGA frame buffer device
[    3.995128] intel_idle: MWAIT substates: 0x21120
[    3.995129] intel_idle: v0.4.1 model 0x3A
[    3.995331] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.995392] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[    3.995415] ACPI: Power Button [PWRB]
[    3.995470] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    3.995503] ACPI: Lid Switch [LID0]
[    3.995531] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    3.995553] ACPI: Power Button [PWRF]
[    3.999050] thermal LNXTHERM:00: registered as thermal_zone0
[    3.999052] ACPI: Thermal Zone [TZ00] (54 C)
[    3.999243] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.999735] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    3.999736] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    4.000336] ahci 0000:00:1f.2: version 3.0
[    4.000502] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    4.010639] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    4.010641] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    4.019798] scsi host0: ahci
[    4.019927] scsi host1: ahci
[    4.020018] scsi host2: ahci
[    4.020100] scsi host3: ahci
[    4.020181] scsi host4: ahci
[    4.020257] scsi host5: ahci
[    4.020296] ata1: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617100 irq 26
[    4.020297] ata2: DUMMY
[    4.020299] ata3: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617200 irq 26
[    4.020300] ata4: DUMMY
[    4.020300] ata5: DUMMY
[    4.020301] ata6: DUMMY
[    4.020359] usbcore: registered new interface driver usbserial_generic
[    4.020365] usbserial: USB Serial support registered for generic
[    4.020390] rtc_cmos 00:01: RTC can wake from S4
[    4.020601] rtc_cmos 00:01: registered as rtc0
[    4.020620] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    4.020673] intel_pstate: Intel P-state driver initializing
[    4.020875] ledtrig-cpu: registered to indicate activity on CPUs
[    4.020974] drop_monitor: Initializing network drop monitor service
[    4.021303] NET: Registered protocol family 10
[    4.034033] Segment Routing with IPv6
[    4.034056] NET: Registered protocol family 17
[    4.034346] RAS: Correctable Errors collector initialized.
[    4.034387] microcode: sig=0x306a9, pf=0x10, revision=0x15
[    4.034437] microcode: Microcode Update Driver: v2.2.
[    4.034442] IPI shorthand broadcast: enabled
[    4.034448] sched_clock: Marking stable (4034202898, 230136)->(4051121212, -16688178)
[    4.034520] registered taskstats version 1
[    4.034526] Loading compiled-in X.509 certificates
[    4.039072] Loaded X.509 cert 'Build time autogenerated kernel key: 1a5b1048a6b7ec78607dc711c9ffd4db5209e9f2'
[    4.039137] zswap: loaded using pool lzo/zbud
[    4.039340] Key type ._fscrypt registered
[    4.039341] Key type .fscrypt registered
[    4.039342] Key type fscrypt-provisioning registered
[    4.047987] Key type big_key registered
[    4.048376] PM:   Magic number: 4:504:776
[    4.048493] rtc_cmos 00:01: setting system clock to 2020-05-19T08:46:12 UTC (1589877972)
[    4.332528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.333230] ata1.00: ATA-8: WDC WD5000LPVT-24G33T1, 02.01A02, max UDMA/133
[    4.333234] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    4.333993] ata1.00: configured for UDMA/133
[    4.334315] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000LPVT-2 1A02 PQ: 0 ANSI: 5
[    4.334735] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.334739] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.334761] sd 0:0:0:0: [sda] Write Protect is off
[    4.334765] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.334796] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.444590]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
[    4.446165] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.645939] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.648601] ata3.00: ATAPI: HL-DT-ST DVDRAM GT80N, LN80, max UDMA/33
[    4.652064] ata3.00: configured for UDMA/33
[    4.664609] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT80N     LN80 PQ: 0 ANSI: 5
[    4.719502] Freeing unused decrypted memory: 2040K
[    4.720080] Freeing unused kernel image (initmem) memory: 1608K
[    4.720160] Write protecting the kernel read-only data: 20480k
[    4.721202] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    4.721857] Freeing unused kernel image (rodata/data gap) memory: 1680K
[    4.756680] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.756681] x86/mm: Checking user space page tables
[    4.786209] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.786211] Run /init as init process
[    4.786212]   with arguments:
[    4.786213]     /init
[    4.786213]     splash
[    4.786214]   with environment:
[    4.786214]     HOME=/
[    4.786215]     TERM=linux
[    4.786215]     BOOT_IMAGE=/boot/vmlinuz-linux
[    4.828292] fbcon: Taking over console
[    4.828369] Console: switching to colour frame buffer device 170x48
[    4.887096] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[    4.898119] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.898166] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.902118] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.902123] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    4.904509] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    4.904517] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    4.904952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    4.904954] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.904956] usb usb1: Product: xHCI Host Controller
[    4.904957] usb usb1: Manufacturer: Linux 5.6.13-arch1-1 xhci-hcd
[    4.904959] usb usb1: SerialNumber: 0000:00:14.0
[    4.905930] hub 1-0:1.0: USB hub found
[    4.905946] hub 1-0:1.0: 4 ports detected
[    4.906407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.906852] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.906857] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.906861] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    4.906916] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    4.906918] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.906919] usb usb2: Product: xHCI Host Controller
[    4.906921] usb usb2: Manufacturer: Linux 5.6.13-arch1-1 xhci-hcd
[    4.906922] usb usb2: SerialNumber: 0000:00:14.0
[    4.907052] hub 2-0:1.0: USB hub found
[    4.907065] hub 2-0:1.0: 4 ports detected
[    4.907690] ehci-pci: EHCI PCI platform driver
[    4.908044] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    4.908167] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    4.908181] ehci-pci 0000:00:1a.0: debug port 2
[    4.912110] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    4.912132] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0619000
[    4.922607] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.922686] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    4.922688] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.922690] usb usb3: Product: EHCI Host Controller
[    4.922692] usb usb3: Manufacturer: Linux 5.6.13-arch1-1 ehci_hcd
[    4.922693] usb usb3: SerialNumber: 0000:00:1a.0
[    4.922829] hub 3-0:1.0: USB hub found
[    4.922835] hub 3-0:1.0: 2 ports detected
[    4.923157] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    4.923164] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    4.923176] ehci-pci 0000:00:1d.0: debug port 2
[    4.927089] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    4.927106] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0618000
[    4.934345] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.934350] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.939323] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.939409] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    4.939411] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.939412] usb usb4: Product: EHCI Host Controller
[    4.939413] usb usb4: Manufacturer: Linux 5.6.13-arch1-1 ehci_hcd
[    4.939414] usb usb4: SerialNumber: 0000:00:1d.0
[    4.939666] hub 4-0:1.0: USB hub found
[    4.939675] hub 4-0:1.0: 2 ports detected
[    4.942697] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    4.953066] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    5.002677] tsc: Refined TSC clocksource calibration: 2594.106 MHz
[    5.002687] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647bfab01, max_idle_ns: 440795211785 ns
[    5.002710] clocksource: Switched to clocksource tsc
[    5.235948] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    5.252626] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    5.272605] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    5.399698] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    5.399702] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.400870] hub 3-1:1.0: USB hub found
[    5.400935] hub 3-1:1.0: 6 ports detected
[    5.412185] usb 1-1: New USB device found, idVendor=04f3, idProduct=152e, bcdDevice= e.09
[    5.412188] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.412191] usb 1-1: Product: Gaming KB
[    5.412193] usb 1-1: Manufacturer: Gaming KB
[    5.419722] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    5.419728] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.420141] hub 4-1:1.0: USB hub found
[    5.420183] hub 4-1:1.0: 6 ports detected
[    5.423028] hid: raw HID events driver (C) Jiri Kosina
[    5.433517] usbcore: registered new interface driver usbhid
[    5.433519] usbhid: USB HID core driver
[    5.437961] input: Gaming KB Gaming KB as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:04F3:152E.0001/input/input5
[    5.438037] hid-generic 0003:04F3:152E.0001: input,hidraw0: USB HID v1.11 Keyboard [Gaming KB Gaming KB] on usb-0000:00:14.0-1/input0
[    5.439548] input: Gaming KB Gaming KB Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:04F3:152E.0002/input/input6
[    5.439595] input: Gaming KB Gaming KB System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:04F3:152E.0002/input/input7
[    5.439629] input: Gaming KB Gaming KB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:04F3:152E.0002/input/input8
[    5.439660] input: Gaming KB Gaming KB as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:04F3:152E.0002/input/input9
[    5.439797] hid-generic 0003:04F3:152E.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Gaming KB Gaming KB] on usb-0000:00:14.0-1/input1
[    5.502823] random: fast init done
[    5.535966] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    5.679274] usb 3-1.2: new full-speed USB device number 3 using ehci-pci
[    5.753546] usb 1-4: New USB device found, idVendor=174f, idProduct=147b, bcdDevice= 2.05
[    5.753550] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    5.753553] usb 1-4: Product: Lenovo EasyCamera
[    5.753556] usb 1-4: Manufacturer: Lenovo EasyCamera
[    5.753558] usb 1-4: SerialNumber: Lenovo EasyCamera
[    5.779442] usb 3-1.2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[    5.779447] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.779449] usb 3-1.2: Product: USB Receiver
[    5.779451] usb 3-1.2: Manufacturer: Logitech
[    5.781714] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:046D:C534.0003/input/input10
[    5.836081] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
[    5.839022] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:046D:C534.0004/input/input11
[    5.839100] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:046D:C534.0004/input/input12
[    5.892694] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:046D:C534.0004/input/input13
[    5.892874] hid-generic 0003:046D:C534.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
[    5.936117] logitech-djreceiver 0003:046D:C534.0003: hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
[    5.965974] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[    6.036680] logitech-djreceiver 0003:046D:C534.0004: hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
[    6.065689] usb 3-1.3: New USB device found, idVendor=105b, idProduct=e065, bcdDevice= 1.12
[    6.065693] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.065696] usb 3-1.3: Product: BCM43142A0
[    6.065698] usb 3-1.3: Manufacturer: Broadcom Corp
[    6.065700] usb 3-1.3: SerialNumber: F82FA8EDD7A6
[    6.093429] logitech-djreceiver 0003:046D:C534.0004: device of type eQUAD nano Lite (0x0a) connected on slot 2
[    6.094105] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:046D:C534.0004/0003:046D:4054.0005/input/input16
[    6.094206] hid-generic 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:1a.0-1.2/input1:2
[    6.107551] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:046D:C534.0004/0003:046D:4054.0005/input/input20
[    6.107641] logitech-hidpp-device 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:1a.0-1.2/input1:2
[    6.142610] usb 3-1.4: new high-speed USB device number 5 using ehci-pci
[    6.240179] usb 3-1.4: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    6.240184] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.240186] usb 3-1.4: Product: USB2.0-CRW
[    6.240189] usb 3-1.4: Manufacturer: Generic
[    6.240191] usb 3-1.4: SerialNumber: 20100201396000000
[    6.247371] usbcore: registered new interface driver rtsx_usb
[   10.535908] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.542054] ata3.00: configured for UDMA/33
[   10.779940] PM: Image not found (code -22)
[   11.103297] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   11.475763] random: crng init done
[   12.843794] systemd[1]: systemd 245.5-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   12.859405] systemd[1]: Detected architecture x86-64.
[   12.910004] systemd[1]: Set hostname to <arch>.
[   14.387369] systemd[1]: Created slice system-getty.slice.
[   14.387872] systemd[1]: Created slice system-modprobe.slice.
[   14.388294] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   14.388857] systemd[1]: Created slice User and Session Slice.
[   14.388980] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   14.389069] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   14.389413] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   14.389476] systemd[1]: Reached target Local Encrypted Volumes.
[   14.389514] systemd[1]: Reached target Paths.
[   14.389536] systemd[1]: Reached target Remote File Systems.
[   14.389555] systemd[1]: Reached target Slices.
[   14.389697] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   14.392701] systemd[1]: Listening on Process Core Dump Socket.
[   14.392748] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   14.392870] systemd[1]: Listening on Journal Audit Socket.
[   14.392937] systemd[1]: Listening on Journal Socket (/dev/log).
[   14.393011] systemd[1]: Listening on Journal Socket.
[   14.393090] systemd[1]: Listening on udev Control Socket.
[   14.393138] systemd[1]: Listening on udev Kernel Socket.
[   14.393879] systemd[1]: Mounting Huge Pages File System...
[   14.394714] systemd[1]: Mounting POSIX Message Queue File System...
[   14.395637] systemd[1]: Mounting Kernel Debug File System...
[   14.396488] systemd[1]: Mounting Kernel Trace File System...
[   14.397369] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   14.398305] systemd[1]: Starting Load Kernel Module drm...
[   14.462214] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   14.462303] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   14.465231] systemd[1]: Starting Journal Service...
[   14.468090] systemd[1]: Starting Load Kernel Modules...
[   14.470715] systemd[1]: Starting Remount Root and Kernel File Systems...
[   14.473316] systemd[1]: Starting udev Coldplug all Devices...
[   14.476325] systemd[1]: Mounted Huge Pages File System.
[   14.476438] systemd[1]: Mounted POSIX Message Queue File System.
[   14.476546] systemd[1]: Mounted Kernel Debug File System.
[   14.476645] systemd[1]: Mounted Kernel Trace File System.
[   14.477100] systemd[1]: Finished Create list of static device nodes for the current kernel.
[   14.486620] Linux agpgart interface v0.103
[   14.492737] EXT4-fs (sda7): re-mounted. Opts: (null)
[   14.493831] systemd[1]: Finished Remount Root and Kernel File Systems.
[   14.493954] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[   14.670806] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   14.671680] systemd[1]: Starting Load/Save Random Seed...
[   14.672747] systemd[1]: Starting Create System Users...
[   14.673182] systemd[1]: modprobe@drm.service: Succeeded.
[   14.673540] systemd[1]: Finished Load Kernel Module drm.
[   14.720929] systemd[1]: Finished udev Coldplug all Devices.
[   14.790080] systemd[1]: Started Journal Service.
[   14.790159] audit: type=1130 audit(1589877983.237:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.811481] vboxdrv: loading out-of-tree module taints kernel.
[   14.811800] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   14.817632] vboxdrv: Found 4 processor cores
[   14.839617] vboxdrv: TSC mode is Invariant, tentative frequency 2594101659 Hz
[   14.839620] vboxdrv: Successfully loaded version 6.1.8 (interface 0x002d0001)
[   14.895520] VBoxNetAdp: Successfully started.
[   14.953540] VBoxNetFlt: Successfully started.
[   14.955801] audit: type=1130 audit(1589877983.400:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.982839] systemd-journald[285]: Received client request to flush runtime journal.
[   15.064297] audit: type=1130 audit(1589877983.510:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.226885] audit: type=1130 audit(1589877983.674:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.375721] audit: type=1130 audit(1589877983.824:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.961089] audit: type=1130 audit(1589877984.407:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.962251] audit: type=1334 audit(1589877984.407:8): prog-id=5 op=LOAD
[   15.962396] audit: type=1334 audit(1589877984.407:9): prog-id=6 op=LOAD
[   17.475205] audit: type=1130 audit(1589877985.924:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.643157] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   17.643159] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   17.643159] RAPL PMU: hw unit of domain package 2^-16 Joules
[   17.643160] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   17.837879] input: PC Speaker as /devices/platform/pcspkr/input/input21
[   17.909708] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200110/utaddress-204)
[   17.909715] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.909718] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
[   17.909722] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.909723] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
[   17.909726] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.909727] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
[   17.909730] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.909730] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   17.910204] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   17.921380] cryptd: max_cpu_qlen set to 1000
[   18.002251] AVX version of gcm_enc/dec engaged.
[   18.002252] AES CTR mode by8 optimization enabled
[   18.109406] battery: ACPI: Battery Slot [BAT1] (battery present)
[   18.196386] ACPI: AC Adapter [ACAD] (on-line)
[   18.482514] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input23
[   18.690803] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   18.695557] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   18.863696] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:1a:06:1f:b7:ad]
[   18.912666] iTCO_vendor_support: vendor-support=0
[   18.914924] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   18.914978] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   18.915120] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   19.036696] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   19.036700] cfg80211: failed to load regulatory.db
[   19.151563] checking generic (d0000000 410000) vs hw (e0000000 400000)
[   19.151565] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[   19.151566] fb0: switching to inteldrmfb from EFI VGA
[   19.151664] Console: switching to colour dummy device 80x25
[   19.151693] i915 0000:00:02.0: vgaarb: deactivate vga console
[   19.154009] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   19.154011] [drm] Driver supports precise vblank timestamp query.
[   19.155135] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   19.217125] [drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
[   19.218217] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   19.218430] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input24
[   19.218604] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   19.225938] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4902]
[   19.230593] fbcon: i915drmfb (fb0) is primary device
[   19.316817] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1695, fw id: 739436
[   19.371577] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input22
[   19.580056] wl: module license 'MIXED/Proprietary' taints kernel.
[   19.580057] Disabling lock debugging due to kernel taint
[   19.614336] wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)

[   19.690679] snd_hda_codec_conexant hdaudioC0D0: CX20757: BIOS auto-probing.
[   19.691063] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20757: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   19.691066] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.691068] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   19.691070] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   19.691071] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   19.691073] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1a
[   19.691076] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x19
[   19.759808] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
[   19.759868] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[   19.759922] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[   19.836171] Adding 12582908k swap on /dev/sda6.  Priority:-2 extents:1 across:12582908k FS
[   19.870180] mousedev: PS/2 mouse device common for all mice
[   20.074489] mc: Linux media interface: v0.10
[   20.123878] Console: switching to colour frame buffer device 170x48
[   20.147401] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[   20.354789] videodev: Linux video capture interface: v2.00
[   20.977579] wl 0000:02:00.0 wlp2s0: renamed from wlan0
[   20.991604] alx 0000:01:00.0 enp1s0: renamed from eth0
[   20.992621] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (174f:147b)
[   21.004564] uvcvideo 1-4:1.0: Entity type for entity Extension 5 was not initialized!
[   21.004566] uvcvideo 1-4:1.0: Entity type for entity Extension 2 was not initialized!
[   21.004568] uvcvideo 1-4:1.0: Entity type for entity Processing 3 was not initialized!
[   21.004569] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[   21.004633] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input28
[   21.004700] usbcore: registered new interface driver uvcvideo
[   21.004700] USB Video Class driver (1.1.1)
[   21.079475] intel_rapl_common: Found RAPL domain package
[   21.079478] intel_rapl_common: Found RAPL domain core
[   21.079480] intel_rapl_common: Found RAPL domain uncore
[   21.079485] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[   21.104261] Bluetooth: Core ver 2.22
[   21.104282] NET: Registered protocol family 31
[   21.104283] Bluetooth: HCI device and connection manager initialized
[   21.104287] Bluetooth: HCI socket layer initialized
[   21.104289] Bluetooth: L2CAP socket layer initialized
[   21.104293] Bluetooth: SCO socket layer initialized
[   21.263808] audit: type=1130 audit(1589877989.710:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   21.267307] audit: type=1130 audit(1589877989.714:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   21.285539] usbcore: registered new interface driver btusb
[   21.398480] Bluetooth: hci0: BCM: chip id 70
[   21.399469] Bluetooth: hci0: BCM: features 0x06
[   21.415543] Bluetooth: hci0: BCM43142A
[   21.416531] Bluetooth: hci0: BCM43142A0 (001.001.011) build 0000
[   21.570334] bluetooth hci0: Direct firmware load for brcm/BCM43142A0-105b-e065.hcd failed with error -2
[   21.570342] Bluetooth: hci0: BCM: Patch brcm/BCM43142A0-105b-e065.hcd not found
[   22.890198] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   22.896468] ata3.00: configured for UDMA/33
[   23.616022] Bluetooth: hci0: command 0x1003 tx timeout
[   23.636836] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   23.643115] ata3.00: configured for UDMA/33
[   23.707340] Bluetooth: hci0: unexpected event for opcode 0x1003
[   23.775969] audit: type=1130 audit(1589877992.220:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   24.116580] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   24.124174] ata3.00: configured for UDMA/33
[   24.136354] audit: type=1130 audit(1589877992.584:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-b3f4f7af\x2d1d40\x2d4172\x2d996e\x2d00afec825d30 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   24.488013] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   24.561101] audit: type=1130 audit(1589877993.007:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-0B46\x2d3D53 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   24.819944] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   24.827566] ata3.00: configured for UDMA/33
[   25.596789] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   25.602904] ata3.00: configured for UDMA/33
[   25.664116] audit: type=1130 audit(1589877994.110:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.697533] audit: type=1127 audit(1589877994.144:17): pid=534 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   25.753851] audit: type=1130 audit(1589877994.200:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.984497] audit: type=1130 audit(1589877994.430:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.242707] ata3.00: limiting speed to UDMA/25:PIO4
[   26.330471] audit: type=1131 audit(1589877994.777:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.538236] audit: type=1130 audit(1589877994.987:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.556717] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   26.564137] ata3.00: configured for UDMA/25
[   26.566744] audit: type=1130 audit(1589877995.014:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.634407] audit: type=1130 audit(1589877995.080:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cronie comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.641436] audit: type=1130 audit(1589877995.087:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.732095] audit: type=1334 audit(1589877995.177:25): prog-id=7 op=LOAD
[   26.732246] audit: type=1334 audit(1589877995.177:26): prog-id=8 op=LOAD
[   26.859285] audit: type=1130 audit(1589877995.304:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   27.536610] audit: type=1130 audit(1589877995.984:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   27.771444] audit: type=1130 audit(1589877996.217:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   31.429645] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   39.054950] kauditd_printk_skb: 8 callbacks suppressed
[   39.054955] audit: type=1131 audit(1589878007.500:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   47.117045] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   47.122115] ata3.00: configured for UDMA/25
[   58.197352] audit: type=1131 audit(1589878026.644:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   58.292790] audit: type=1334 audit(1589878026.740:40): prog-id=10 op=UNLOAD
[   58.292799] audit: type=1334 audit(1589878026.740:41): prog-id=9 op=UNLOAD
[   72.233150] logitech-hidpp-device 0003:046D:4054.0005: HID++ 4.5 device connected.
[   72.729362] ata3.00: limiting speed to PIO4
[   73.043734] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   73.050042] ata3.00: configured for PIO4
[   78.776104] audit: type=1100 audit(1589878047.224:42): pid=548 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_tally2,pam_shells,pam_unix,pam_permit acct="ananthu" exe="/usr/bin/login" hostname=arch addr=? terminal=tty1 res=success'
[   78.878308] audit: type=1101 audit(1589878047.327:43): pid=548 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="ananthu" exe="/usr/bin/login" hostname=arch addr=? terminal=tty1 res=success'
[   78.935560] audit: type=1103 audit(1589878047.384:44): pid=548 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_tally2,pam_shells,pam_unix,pam_permit acct="ananthu" exe="/usr/bin/login" hostname=arch addr=? terminal=tty1 res=success'
[   78.935990] audit: type=1006 audit(1589878047.384:45): pid=548 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   79.047892] audit: type=1130 audit(1589878047.494:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   79.067565] audit: type=1101 audit(1589878047.514:47): pid=566 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="ananthu" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   79.067648] audit: type=1103 audit(1589878047.514:48): pid=566 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="ananthu" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   79.067738] audit: type=1006 audit(1589878047.514:49): pid=566 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   79.068868] audit: type=1105 audit(1589878047.514:50): pid=566 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="ananthu" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   79.098367] audit: type=1334 audit(1589878047.547:51): prog-id=11 op=LOAD
[  106.223380] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  106.229666] ata3.00: configured for PIO4
[  113.111551] kauditd_printk_skb: 4 callbacks suppressed
[  113.111555] audit: type=1101 audit(1589878081.557:56): pid=713 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  113.111770] audit: type=1103 audit(1589878081.557:57): pid=713 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  113.111936] audit: type=1006 audit(1589878081.557:58): pid=713 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[  113.112252] audit: type=1105 audit(1589878081.557:59): pid=713 uid=0 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  113.113779] audit: type=1110 audit(1589878081.560:60): pid=713 uid=0 auid=1000 ses=3 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  113.294155] audit: type=1104 audit(1589878081.740:61): pid=713 uid=0 auid=1000 ses=3 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  113.294260] audit: type=1106 audit(1589878081.740:62): pid=713 uid=0 auid=1000 ses=3 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  141.096009] ata3.00: limiting speed to PIO3
[  141.410346] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  141.416582] ata3.00: configured for PIO3
[  154.530303] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  154.536590] ata3.00: configured for PIO3
[  184.823630] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  184.829822] ata3.00: configured for PIO3
[  253.516990] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  253.517936] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[  253.517941] ata3.00: revalidation failed (errno=-5)
[  259.023645] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  259.029924] ata3.00: configured for PIO3
[  282.429313] ata3.00: limiting speed to PIO0
[  282.743587] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  282.749816] ata3.00: configured for PIO0
[  293.301009] audit: type=1101 audit(1589878261.747:63): pid=763 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  293.301249] audit: type=1103 audit(1589878261.747:64): pid=763 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  293.301425] audit: type=1006 audit(1589878261.747:65): pid=763 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
[  293.301824] audit: type=1105 audit(1589878261.747:66): pid=763 uid=0 auid=1000 ses=4 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  293.303722] audit: type=1110 audit(1589878261.750:67): pid=763 uid=0 auid=1000 ses=4 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  293.364120] audit: type=1104 audit(1589878261.810:68): pid=763 uid=0 auid=1000 ses=4 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  293.364258] audit: type=1106 audit(1589878261.810:69): pid=763 uid=0 auid=1000 ses=4 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  321.570234] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  321.576526] ata3.00: configured for PIO0
[  321.943614] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  321.949865] ata3.00: configured for PIO0
[  333.837199] audit: type=1130 audit(1589878302.284:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  344.014214] audit: type=1131 audit(1589878312.460:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  347.596956] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  347.603245] ata3.00: configured for PIO0
[  361.583634] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  361.589893] ata3.00: configured for PIO0
[  396.600938] audit: type=1130 audit(1589878365.047:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  399.225720] audit: type=1130 audit(1589878367.670:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  401.142066] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  401.146805] ata3.00: configured for PIO0
[  463.435750] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  463.440548] ata3.00: configured for PIO0
[  473.370786] audit: type=1101 audit(1589878441.817:74): pid=1109 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  473.370993] audit: type=1103 audit(1589878441.817:75): pid=1109 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  473.371121] audit: type=1006 audit(1589878441.817:76): pid=1109 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=5 res=1
[  473.371423] audit: type=1105 audit(1589878441.817:77): pid=1109 uid=0 auid=1000 ses=5 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  473.372870] audit: type=1110 audit(1589878441.820:78): pid=1109 uid=0 auid=1000 ses=5 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  473.436824] audit: type=1104 audit(1589878441.884:79): pid=1109 uid=0 auid=1000 ses=5 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  473.436983] audit: type=1106 audit(1589878441.884:80): pid=1109 uid=0 auid=1000 ses=5 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  474.522929] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  474.529104] ata3.00: configured for PIO0
[  477.079195] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  477.084005] ata3.00: configured for PIO0
[  530.849827] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  530.857437] ata3.00: configured for PIO0
[  555.488759] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  555.493613] ata3.00: configured for PIO0
[  583.542446] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  583.547201] ata3.00: configured for PIO0
[  611.703303] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  616.895806] ata3.00: qc timeout (cmd 0xa1)
[  616.895820] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[  616.895823] ata3.00: revalidation failed (errno=-5)
[  617.209962] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  617.216363] ata3.00: configured for PIO0
[  634.280702] audit: type=1130 audit(1589878602.727:81): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  645.008506] audit: type=1131 audit(1589878613.454:82): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  653.443161] audit: type=1101 audit(1589878621.890:83): pid=1293 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  653.443293] audit: type=1103 audit(1589878621.890:84): pid=1293 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  653.443404] audit: type=1006 audit(1589878621.890:85): pid=1293 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=6 res=1
[  653.443692] audit: type=1105 audit(1589878621.890:86): pid=1293 uid=0 auid=1000 ses=6 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  653.445190] audit: type=1110 audit(1589878621.890:87): pid=1293 uid=0 auid=1000 ses=6 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  653.506861] audit: type=1104 audit(1589878621.954:88): pid=1293 uid=0 auid=1000 ses=6 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  653.507001] audit: type=1106 audit(1589878621.954:89): pid=1293 uid=0 auid=1000 ses=6 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  667.386645] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  667.391515] ata3.00: configured for PIO0
[  712.609012] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  712.613815] ata3.00: configured for PIO0
[  730.122849] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  730.130454] ata3.00: configured for PIO0
[  748.343322] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  748.349654] ata3.00: configured for PIO0
[  782.783454] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  782.789793] ata3.00: configured for PIO0
[  788.179894] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  788.184850] ata3.00: configured for PIO0
[  788.556535] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  788.561386] ata3.00: configured for PIO0
[  799.650026] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  799.656185] ata3.00: configured for PIO0
[  802.222400] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  802.228589] ata3.00: configured for PIO0
[  820.450043] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  820.457648] ata3.00: configured for PIO0
[  825.036805] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  825.041823] ata3.00: configured for PIO0
[  833.513353] audit: type=1101 audit(1589878801.960:90): pid=1298 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  833.513721] audit: type=1103 audit(1589878801.960:91): pid=1298 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  833.513890] audit: type=1006 audit(1589878801.960:92): pid=1298 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=7 res=1
[  833.514298] audit: type=1105 audit(1589878801.960:93): pid=1298 uid=0 auid=1000 ses=7 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  833.516131] audit: type=1110 audit(1589878801.964:94): pid=1298 uid=0 auid=1000 ses=7 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  833.583717] audit: type=1104 audit(1589878802.030:95): pid=1298 uid=0 auid=1000 ses=7 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  833.583862] audit: type=1106 audit(1589878802.030:96): pid=1298 uid=0 auid=1000 ses=7 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[  887.323307] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  887.329590] ata3.00: configured for PIO0
[  928.865566] audit: type=1130 audit(1589878897.310:97): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  928.865576] audit: type=1131 audit(1589878897.310:98): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  935.515395] audit: type=1130 audit(1589878903.960:99): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  946.014406] audit: type=1131 audit(1589878914.460:100): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1012.590187] audit: type=1101 audit(1589878981.037:101): pid=1312 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1012.590410] audit: type=1103 audit(1589878981.037:102): pid=1312 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1012.590572] audit: type=1006 audit(1589878981.037:103): pid=1312 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=8 res=1
[ 1012.590971] audit: type=1105 audit(1589878981.037:104): pid=1312 uid=0 auid=1000 ses=8 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1012.592826] audit: type=1110 audit(1589878981.040:105): pid=1312 uid=0 auid=1000 ses=8 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1012.660430] audit: type=1104 audit(1589878981.107:106): pid=1312 uid=0 auid=1000 ses=8 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1012.660509] audit: type=1106 audit(1589878981.107:107): pid=1312 uid=0 auid=1000 ses=8 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1022.376478] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1022.384045] ata3.00: configured for PIO0
[ 1022.742640] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1022.748840] ata3.00: configured for PIO0
[ 1029.193251] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1029.199417] ata3.00: configured for PIO0
[ 1082.956742] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1082.962864] ata3.00: configured for PIO0
[ 1146.963274] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1146.970825] ata3.00: configured for PIO0
[ 1192.666692] audit: type=1101 audit(1589879161.114:108): pid=1340 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1192.666836] audit: type=1103 audit(1589879161.114:109): pid=1340 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1192.666944] audit: type=1006 audit(1589879161.114:110): pid=1340 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=9 res=1
[ 1192.667227] audit: type=1105 audit(1589879161.114:111): pid=1340 uid=0 auid=1000 ses=9 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1192.668712] audit: type=1110 audit(1589879161.114:112): pid=1340 uid=0 auid=1000 ses=9 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1192.736807] audit: type=1104 audit(1589879161.184:113): pid=1340 uid=0 auid=1000 ses=9 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1192.736890] audit: type=1106 audit(1589879161.184:114): pid=1340 uid=0 auid=1000 ses=9 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1198.575334] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1198.580190] ata3.00: configured for PIO0
[ 1236.267185] audit: type=1130 audit(1589879204.714:115): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1247.014628] audit: type=1131 audit(1589879215.460:116): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1265.142199] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1265.146957] ata3.00: configured for PIO0
[ 1297.156122] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1297.163733] ata3.00: configured for PIO0
[ 1370.113252] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1370.119352] ata3.00: configured for PIO0
[ 1372.742761] audit: type=1101 audit(1589879341.190:117): pid=1815 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1372.742977] audit: type=1103 audit(1589879341.190:118): pid=1815 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1372.743113] audit: type=1006 audit(1589879341.190:119): pid=1815 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=10 res=1
[ 1372.743431] audit: type=1105 audit(1589879341.190:120): pid=1815 uid=0 auid=1000 ses=10 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1372.744753] audit: type=1110 audit(1589879341.190:121): pid=1815 uid=0 auid=1000 ses=10 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1372.809864] audit: type=1104 audit(1589879341.257:122): pid=1815 uid=0 auid=1000 ses=10 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1372.809974] audit: type=1106 audit(1589879341.257:123): pid=1815 uid=0 auid=1000 ses=10 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1381.196287] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1381.203737] ata3.00: configured for PIO0
[ 1390.169868] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1390.176145] ata3.00: configured for PIO0
[ 1433.263218] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1433.269412] ata3.00: configured for PIO0
[ 1440.089853] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1440.096129] ata3.00: configured for PIO0
[ 1474.632220] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1474.638362] ata3.00: configured for PIO0
[ 1509.208915] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1509.213808] ata3.00: configured for PIO0
[ 1520.288899] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1520.293765] ata3.00: configured for PIO0
[ 1537.258255] audit: type=1130 audit(1589879505.704:124): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1548.013971] audit: type=1131 audit(1589879516.460:125): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1552.815709] audit: type=1101 audit(1589879521.264:126): pid=1830 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1552.815947] audit: type=1103 audit(1589879521.264:127): pid=1830 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1552.816111] audit: type=1006 audit(1589879521.264:128): pid=1830 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=11 res=1
[ 1552.816522] audit: type=1105 audit(1589879521.264:129): pid=1830 uid=0 auid=1000 ses=11 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1552.818311] audit: type=1110 audit(1589879521.264:130): pid=1830 uid=0 auid=1000 ses=11 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1552.862018] audit: type=1104 audit(1589879521.307:131): pid=1830 uid=0 auid=1000 ses=11 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1552.862119] audit: type=1106 audit(1589879521.307:132): pid=1830 uid=0 auid=1000 ses=11 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1561.245540] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1561.250421] ata3.00: configured for PIO0
[ 1604.349088] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1604.355321] ata3.00: configured for PIO0
[ 1638.903184] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1644.095584] ata3.00: qc timeout (cmd 0xa1)
[ 1644.095603] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 1644.095607] ata3.00: revalidation failed (errno=-5)
[ 1644.408846] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1644.413694] ata3.00: configured for PIO0
[ 1655.325474] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1655.330294] ata3.00: configured for PIO0
[ 1685.623091] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1685.627930] ata3.00: configured for PIO0
[ 1732.867786] audit: type=1101 audit(1589879701.314:133): pid=1834 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1732.867927] audit: type=1103 audit(1589879701.314:134): pid=1834 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1732.868041] audit: type=1006 audit(1589879701.314:135): pid=1834 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=12 res=1
[ 1732.868326] audit: type=1105 audit(1589879701.314:136): pid=1834 uid=0 auid=1000 ses=12 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1732.869599] audit: type=1110 audit(1589879701.317:137): pid=1834 uid=0 auid=1000 ses=12 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1732.936542] audit: type=1104 audit(1589879701.384:138): pid=1834 uid=0 auid=1000 ses=12 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1732.936694] audit: type=1106 audit(1589879701.384:139): pid=1834 uid=0 auid=1000 ses=12 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1762.849133] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1762.853951] ata3.00: configured for PIO0
[ 1807.436120] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1807.443672] ata3.00: configured for PIO0
[ 1820.662095] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1820.666898] ata3.00: configured for PIO0
[ 1821.035412] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1821.040219] ata3.00: configured for PIO0
[ 1831.645889] audit: type=1130 audit(1589879800.094:140): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1842.006558] audit: type=1131 audit(1589879810.454:141): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1855.248720] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1855.253571] ata3.00: configured for PIO0
[ 1889.795397] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1889.800349] ata3.00: configured for PIO0
[ 1901.605446] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1901.610308] ata3.00: configured for PIO0
[ 1901.968777] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1901.973730] ata3.00: configured for PIO0
[ 1912.943288] audit: type=1101 audit(1589879881.391:142): pid=1977 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1912.943528] audit: type=1103 audit(1589879881.391:143): pid=1977 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1912.943695] audit: type=1006 audit(1589879881.391:144): pid=1977 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=13 res=1
[ 1912.944227] audit: type=1105 audit(1589879881.391:145): pid=1977 uid=0 auid=1000 ses=13 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1912.945626] audit: type=1110 audit(1589879881.394:146): pid=1977 uid=0 auid=1000 ses=13 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1913.013089] audit: type=1104 audit(1589879881.461:147): pid=1977 uid=0 auid=1000 ses=13 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1913.013213] audit: type=1106 audit(1589879881.461:148): pid=1977 uid=0 auid=1000 ses=13 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 1966.155968] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1966.160783] ata3.00: configured for PIO0
[ 1979.388661] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1979.393499] ata3.00: configured for PIO0
[ 1979.748743] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1979.753541] ata3.00: configured for PIO0
[ 1986.195316] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1986.200183] ata3.00: configured for PIO0
[ 2035.701991] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2035.706871] ata3.00: configured for PIO0
[ 2090.738633] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2090.743496] ata3.00: configured for PIO0
[ 2093.019427] audit: type=1101 audit(1589880061.467:149): pid=2109 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2093.019583] audit: type=1103 audit(1589880061.467:150): pid=2109 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2093.019693] audit: type=1006 audit(1589880061.467:151): pid=2109 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=14 res=1
[ 2093.019930] audit: type=1105 audit(1589880061.467:152): pid=2109 uid=0 auid=1000 ses=14 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2093.021195] audit: type=1110 audit(1589880061.467:153): pid=2109 uid=0 auid=1000 ses=14 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2093.093225] audit: type=1104 audit(1589880061.541:154): pid=2109 uid=0 auid=1000 ses=14 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2093.093382] audit: type=1106 audit(1589880061.541:155): pid=2109 uid=0 auid=1000 ses=14 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2125.301995] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2125.308121] ata3.00: configured for PIO0
[ 2125.671954] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2125.676863] ata3.00: configured for PIO0
[ 2139.352241] audit: type=1130 audit(1589880107.801:156): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2150.010076] audit: type=1131 audit(1589880118.457:157): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2213.192503] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2213.199954] ata3.00: configured for PIO0
[ 2213.568507] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2213.573307] ata3.00: configured for PIO0
[ 2273.099943] audit: type=1101 audit(1589880241.547:158): pid=2205 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2273.100151] audit: type=1103 audit(1589880241.547:159): pid=2205 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2273.100280] audit: type=1006 audit(1589880241.547:160): pid=2205 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=15 res=1
[ 2273.100582] audit: type=1105 audit(1589880241.547:161): pid=2205 uid=0 auid=1000 ses=15 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2273.102076] audit: type=1110 audit(1589880241.551:162): pid=2205 uid=0 auid=1000 ses=15 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2273.150193] audit: type=1104 audit(1589880241.597:163): pid=2205 uid=0 auid=1000 ses=15 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2273.150313] audit: type=1106 audit(1589880241.597:164): pid=2205 uid=0 auid=1000 ses=15 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2318.161885] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2318.166682] ata3.00: configured for PIO0
[ 2329.251899] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2329.258099] ata3.00: configured for PIO0
[ 2378.741820] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2378.747939] ata3.00: configured for PIO0
[ 2387.695329] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2387.700102] ata3.00: configured for PIO0
[ 2388.055352] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2388.060217] ata3.00: configured for PIO0
[ 2397.408854] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2397.413675] ata3.00: configured for PIO0
[ 2453.156540] audit: type=1101 audit(1589880421.604:165): pid=2276 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2453.156700] audit: type=1103 audit(1589880421.604:166): pid=2276 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2453.156793] audit: type=1006 audit(1589880421.604:167): pid=2276 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=16 res=1
[ 2453.157009] audit: type=1105 audit(1589880421.604:168): pid=2276 uid=0 auid=1000 ses=16 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2453.158127] audit: type=1110 audit(1589880421.604:169): pid=2276 uid=0 auid=1000 ses=16 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2453.226541] audit: type=1104 audit(1589880421.674:170): pid=2276 uid=0 auid=1000 ses=16 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2453.226602] audit: type=1106 audit(1589880421.674:171): pid=2276 uid=0 auid=1000 ses=16 msg='op=PAM:session_close grantors=pam_loginuid,pam_limits,pam_unix acct="ananthu" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
[ 2466.725735] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2466.733267] ata3.00: configured for PIO0
[ 2471.315230] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2471.320009] ata3.00: configured for PIO0
[ 2484.548933] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2484.553883] ata3.00: configured for PIO0
[ 2491.381860] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2491.386711] ata3.00: configured for PIO0
[ 2496.575312] ata3.00: qc timeout (cmd 0xef)
[ 2496.575328] ata3.00: failed to enable DIPM, Emask 0x5
[ 2496.888547] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2496.894742] ata3.00: configured for PIO0

journalctl -xb -p 4


-- Logs begin at Fri 2020-04-17 23:30:47 IST, end at Tue 2020-05-19 14:58:48 IST. --
May 19 14:16:23 arch kernel: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
May 19 14:16:23 arch kernel:  #2 #3
May 19 14:16:23 arch kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
May 19 14:16:23 arch kernel: pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
May 19 14:16:23 arch kernel: pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
May 19 14:16:23 arch kernel: vboxdrv: loading out-of-tree module taints kernel.
May 19 14:16:23 arch kernel: VBoxNetAdp: Successfully started.
May 19 14:16:23 arch kernel: VBoxNetFlt: Successfully started.
May 19 14:16:32 arch kernel: ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200110/utaddress-204)
May 19 14:16:32 arch kernel: ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
May 19 14:16:32 arch kernel: ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
May 19 14:16:32 arch kernel: ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
May 19 14:16:32 arch kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
May 19 14:16:32 arch kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
May 19 14:16:32 arch kernel: wl: module license 'MIXED/Proprietary' taints kernel.
May 19 14:16:32 arch kernel: Disabling lock debugging due to kernel taint
May 19 14:16:32 arch kernel: wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
May 19 14:16:32 arch kernel: 
May 19 14:16:32 arch kernel: uvcvideo 1-4:1.0: Entity type for entity Extension 5 was not initialized!
May 19 14:16:32 arch kernel: uvcvideo 1-4:1.0: Entity type for entity Extension 2 was not initialized!
May 19 14:16:32 arch kernel: uvcvideo 1-4:1.0: Entity type for entity Processing 3 was not initialized!
May 19 14:16:32 arch kernel: uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
May 19 14:16:32 arch kernel: bluetooth hci0: Direct firmware load for brcm/BCM43142A0-105b-e065.hcd failed with error -2
May 19 14:16:32 arch kernel: Bluetooth: hci0: command 0x1003 tx timeout
May 19 14:16:32 arch kernel: Bluetooth: hci0: unexpected event for opcode 0x1003
May 19 14:16:30 arch systemd-udevd[305]: controlC0: Process '/usr/bin/alsactl restore 0' failed with exit code 99.
May 19 14:16:34 arch kernel: ata3.00: limiting speed to UDMA/25:PIO4
May 19 14:16:39 arch wpa_supplicant[554]: bgscan simple: Failed to enable signal strength monitoring
May 19 14:16:47 arch kernel: kauditd_printk_skb: 8 callbacks suppressed
May 19 14:17:21 arch kernel: ata3.00: limiting speed to PIO4
May 19 14:18:01 arch kernel: kauditd_printk_skb: 4 callbacks suppressed
May 19 14:18:29 arch kernel: ata3.00: limiting speed to PIO3
May 19 14:20:21 arch kernel: ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100)
May 19 14:20:21 arch kernel: ata3.00: revalidation failed (errno=-5)
May 19 14:20:50 arch kernel: ata3.00: limiting speed to PIO0
May 19 14:22:48 arch systemd[566]: pulseaudio.service: Failed with result 'exit-code'.
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- The unit UNIT has entered the 'failed' state with result 'exit-code'.
May 19 14:22:48 arch systemd[566]: Failed to start Sound Service.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished with a failure.
-- 
-- The job identifier is 38 and the job result is failed.
May 19 14:22:48 arch systemd[566]: pulseaudio.service: Failed with result 'exit-code'.
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- The unit UNIT has entered the 'failed' state with result 'exit-code'.
May 19 14:22:48 arch systemd[566]: Failed to start Sound Service.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished with a failure.
-- 
-- The job identifier is 53 and the job result is failed.
May 19 14:22:49 arch systemd[566]: pulseaudio.service: Failed with result 'exit-code'.
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- The unit UNIT has entered the 'failed' state with result 'exit-code'.
May 19 14:22:49 arch systemd[566]: Failed to start Sound Service.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished with a failure.
-- 
-- The job identifier is 68 and the job result is failed.
May 19 14:22:49 arch systemd[566]: pulseaudio.service: Failed with result 'exit-code'.
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- The unit UNIT has entered the 'failed' state with result 'exit-code'.
May 19 14:22:49 arch systemd[566]: Failed to start Sound Service.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished with a failure.
-- 
-- The job identifier is 83 and the job result is failed.
May 19 14:22:50 arch systemd[566]: pulseaudio.service: Failed with result 'exit-code'.
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- The unit UNIT has entered the 'failed' state with result 'exit-code'.
May 19 14:22:50 arch systemd[566]: Failed to start Sound Service.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished with a failure.
-- 
-- The job identifier is 98 and the job result is failed.
May 19 14:22:50 arch systemd[566]: pulseaudio.service: Start request repeated too quickly.
May 19 14:22:50 arch systemd[566]: pulseaudio.service: Failed with result 'exit-code'.
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- The unit UNIT has entered the 'failed' state with result 'exit-code'.
May 19 14:22:50 arch systemd[566]: Failed to start Sound Service.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished with a failure.
-- 
-- The job identifier is 113 and the job result is failed.
May 19 14:22:50 arch systemd[566]: pulseaudio.socket: Failed with result 'service-start-limit-hit'.
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- The unit UNIT has entered the 'failed' state with result 'service-start-limit-hit'.
May 19 14:26:25 arch kernel: ata3.00: qc timeout (cmd 0xa1)
May 19 14:26:25 arch kernel: ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 19 14:26:25 arch kernel: ata3.00: revalidation failed (errno=-5)
May 19 14:43:32 arch kernel: ata3.00: qc timeout (cmd 0xa1)
May 19 14:43:32 arch kernel: ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 19 14:43:32 arch kernel: ata3.00: revalidation failed (errno=-5)
May 19 14:57:45 arch kernel: ata3.00: qc timeout (cmd 0xef)
May 19 14:57:45 arch kernel: ata3.00: failed to enable DIPM, Emask 0x5

Last edited by Cipher69969 (2020-05-19 16:01:39)

paulkerry · 2020-05-19 12:37:08

Cipher69969 wrote:

[ 4.648601] ata3.00: ATAPI: HL-DT-ST DVDRAM GT80N, LN80, max UDMA/33

So it's a dvd drive and the kernel is renegotiating the connection speed. Does the drive actually work?

Have you checked the cabling? Can you try an alternative dvd drive? BIOS update?

Cheers
Paul

Cipher69969 · 2020-05-19 14:09:16

@paulkerry thanks for replying, if the error is related to dvd drive i am not using it anyways so we can ignore it. Once again thanks for solving.

Last edited by Cipher69969 (2020-05-19 14:10:09)

ewaller · 2020-05-19 15:02:17

In the future, DO NOT crosspost. If you wish a thread moved, use the report link and ask a moderator for assistance.
Closing your other thread.

WorMzy · 2020-05-19 15:50:00

If this is solved, please mark it as such by editing the first post and amending the topic title.

https://wiki.archlinux.org/index.php/Co … ow_to_post

Mod note: Not an installation issue, moving to NC.

Arch Linux

#1 2020-05-19 09:30:05

[SOLVED] ata3 error

#2 2020-05-19 12:37:08

Re: [SOLVED] ata3 error

#3 2020-05-19 14:09:16

Re: [SOLVED] ata3 error

#4 2020-05-19 15:02:17

Re: [SOLVED] ata3 error

#5 2020-05-19 15:50:00

Re: [SOLVED] ata3 error

Board footer