You are not logged in.
Have i5-7600 connected to hdmi display, also have 1050ti [navidia prop-driver card for encodeing.
Read at sway site that a gpu could be selected with shell cmd:
WLR_DRM_DEVICES=/dev/dri/card0 sway
# failing with seeing navidia prop-driver
also tried
WLR_DRM_DEVICES=/dev/dri/card1 sway
# fails with same error
when doing the command anti-prop-drive sway starts:
sway --my-next-gpu-wont-be-nvidia
TIA
Offline
As far as I'm aware, `WLR_DRM_DEVICES` just selects the GPU it should use. It doesn't change anything about the logic to detect the use of proprietary nVidia drivers.
Disabling that proprietary driver check is what the `--my-next-gpu-wont-be-nvidia` flag is for.
I.o.w.; the behaviour you're seeing is as expected when you use the proprietary nVidia drivers.
So select the desired (non-nVidia, or switch to nouveau) GPU using WLR_DRM_DEVICES and pass the flag if you have the proprietary drivers on your system.
Last edited by Omar007 (2020-07-09 19:44:51)
Offline