You are not logged in.

Pages: 1

#1 2020-09-24 20:14:07

asmitir
Member
Registered: 2020-09-24
Posts: 18

Another fresh install... Another PulseAudio problem...

everything appears to be working fine on pavucontrol, the problem is, im not hearing anything. i have pulseaudio installed...

Please, how can i help you to help me?

Offline

#2 2020-09-24 20:32:51

asmitir
Member
Registered: 2020-09-24
Posts: 18

Re: Another fresh install... Another PulseAudio problem...

I am on the audio group and I have Master and PCM unmuted trough AlsaMixer (As i know...)

Last edited by asmitir (2020-09-24 20:35:52)

Offline

#3 2020-09-24 22:12:14

euromatlox
Member
Registered: 2017-02-10
Posts: 154

Re: Another fresh install... Another PulseAudio problem...

If laptop, and it has mute button (perhaps F1), try pressing it. If it's in mute position and the software muting isn't, computer is always muted. I recently had this type of phenomena with my laptop. Not sure, but perhaps you should be also in wheel and power groups too. Check also volume level, at zero level is normal not to hear anything.

Last edited by euromatlox (2020-09-24 22:14:03)

Offline

#4 2020-09-24 22:14:52

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,366

Re: Another fresh install... Another PulseAudio problem...

Post in [ code ] [ /code ] tags without spaces during attempted playback 

dmesg | grep -E 'snd|hda|sof'
aplay -lL
amixer -c0
pacmd list-cards
pacmd list-sinks
pacmd list-sink-inputs

Offline

#5 2020-09-25 14:18:59

asmitir
Member
Registered: 2020-09-24
Posts: 18

Re: Another fresh install... Another PulseAudio problem...

alright, i seen https://bbs.archlinux.org/viewtopic.php … 3#p1211143 this, and installed paprefs.

i too changed the profile on the configuration settings, from Analog Stereo Input to Analog Stereo Duplex (which curiously appears as unavailable)

here is the output either way...

dmesg | grep -E 'snd|hda|sof':

[    0.394868] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.394870] software IO TLB: mapped [mem 0xac78b000-0xb078b000] (64MB)
[    8.466883] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[    8.863121] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    8.863124] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.863126] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    8.863127] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    8.863128] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    8.863130] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    8.863132] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    8.863133] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a

aplay -lL

null
    Discard all samples (playback) or generate zero samples (capture)
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PulseAudio Sound Server)
hdmi:CARD=HDMI,DEV=0
    HDA ATI HDMI, HDMI 0
    HDMI Audio Output
usbstream:CARD=HDMI
    HDA ATI HDMI
    USB Stream Output
sysdefault:CARD=Generic
    HD-Audio Generic, ALC662 rev1 Analog
    Default Audio Device
front:CARD=Generic,DEV=0
    HD-Audio Generic, ALC662 rev1 Analog
    Front output / input
surround21:CARD=Generic,DEV=0
    HD-Audio Generic, ALC662 rev1 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic,DEV=0
    HD-Audio Generic, ALC662 rev1 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic,DEV=0
    HD-Audio Generic, ALC662 rev1 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic,DEV=0
    HD-Audio Generic, ALC662 rev1 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic,DEV=0
    HD-Audio Generic, ALC662 rev1 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic,DEV=0
    HD-Audio Generic, ALC662 rev1 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
usbstream:CARD=Generic
    HD-Audio Generic
    USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

amixer -c0:

Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]

pacmd list-cards:

2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_01.1>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xfeb44000 irq 27"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:01.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "9902"
		device.product.name = "Trinity HDMI Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		off: Off (priority 0, available: unknown)
	active profile: <off>
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.pci-0000_00_14.2>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfeb40000 irq 16"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:14.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "780d"
		device.product.name = "FCH Azalia Controller"
		device.form_factor = "internal"
		device.string = "1"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6500, available: no)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: no)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_14.2.analog-stereo/#1: Built-in Audio Analog Stereo
	sources:
		alsa_input.pci-0000_00_14.2.analog-stereo/#0: Built-in Audio Analog Stereo
		alsa_output.pci-0000_00_14.2.analog-stereo.monitor/#2: Monitor of Built-in Audio Analog Stereo
	ports:
		analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: yes)
			properties:
				
		analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: no)
			properties:
				
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"

pacmd list-sinks:

1 sink(s) available.
  * index: 1
	name: <alsa_output.pci-0000_00_14.2.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9039
	volume: front-left: 30419 /  46% / -20.00 dB,   front-right: 30419 /  46% / -20.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 39.90 ms
	max request: 7 KiB
	max rewind: 7 KiB
	monitor source: 2
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 3
	configured latency: 40.00 ms; range is 0.50 .. 1837.33 ms
	card: 1 <alsa_card.pci-0000_00_14.2>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC662 rev1 Analog"
		alsa.id = "ALC662 rev1 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfeb40000 irq 16"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:14.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "780d"
		device.product.name = "FCH Azalia Controller"
		device.form_factor = "internal"
		device.string = "front:1"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC662 rev1"
		alsa.components = "HDA:10ec0662,18497662,00100101"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: no)
			properties:
				
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-headphones>

pacmd list-sink-inputs:

1 sink(s) available.
  * index: 1
	name: <alsa_output.pci-0000_00_14.2.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9039
	volume: front-left: 30419 /  46% / -20.00 dB,   front-right: 30419 /  46% / -20.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 39.90 ms
	max request: 7 KiB
	max rewind: 7 KiB
	monitor source: 2
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 3
	configured latency: 40.00 ms; range is 0.50 .. 1837.33 ms
	card: 1 <alsa_card.pci-0000_00_14.2>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC662 rev1 Analog"
		alsa.id = "ALC662 rev1 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfeb40000 irq 16"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:14.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "780d"
		device.product.name = "FCH Azalia Controller"
		device.form_factor = "internal"
		device.string = "front:1"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC662 rev1"
		alsa.components = "HDA:10ec0662,18497662,00100101"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: no)
			properties:
				
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-headphones>
[asmitir@asmitir ~]$ pacmd list-sink-inputs
1 sink input(s) available.
    index: 0
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 1 <alsa_output.pci-0000_00_14.2.analog-stereo>
	volume: front-left: 99957 / 153% / 11.00 dB,   front-right: 99957 / 153% / 11.00 dB
	        balance 0.00
	muted: no
	current latency: 89.75 ms
	requested latency: 75.00 ms
	sample spec: float32le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	resample method: copy
	module: 9
	client: 6 <Firefox>
	properties:
		media.name = "AudioStream"
		application.name = "Firefox"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "33"
		application.process.id = "533"
		application.process.user = "asmitir"
		application.process.host = "asmitir"
		application.process.binary = "firefox"
		application.language = "C"
		window.x11.display = ":0"
		application.process.machine_id = "155f6af3a01f4f56b680bc49d8a71e6d"
		application.process.session_id = "2"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"

Offline

#6 2020-09-25 15:34:10

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,366

Re: Another fresh install... Another PulseAudio problem...

asmitir wrote:

alright, i seen https://bbs.archlinux.org/viewtopic.php … 3#p1211143 this, and installed paprefs.

That's a misguided solution to an insufficient understanding of the problem.

i too changed the profile on the configuration settings, from Analog Stereo Input to Analog Stereo Duplex (which curiously appears as unavailable)

That is the actual problem we need to fix

here is the output either way...

amixer -c0:

Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]

In this case since the card that's actually of interest is on index 1 -c1 would be more useful (.. check with aplay -l you need the index of the card where you want output from)

The rest looks technically alright (...Other than the non availability of the output), now to find out whether this is a pulseaudio or a kernel problem. Easiest way would be to just omit pulseaudio, while not playing anything from pulse, do you receive output if you do 

speaker-test -c2 -Dhw:1 #Similar deal, the hw:1 here must refer to the index of the analog card from aplay -l

if that doesn't work, then pulse is irrelevant at that point, you either find something in amixer to adjust or we have a kernel/codec problem.

Last edited by V1del (2020-09-25 15:36:54)

Offline

#7 2020-09-25 15:35:31

euromatlox
Member
Registered: 2017-02-10
Posts: 154

Re: Another fresh install... Another PulseAudio problem...

I noticed word 'firefox'. Try first Google Chrome, it has sound without pulseaudio, Firefox has not. If sound works with Chrome, it tells that ALSA works and it eliminates some possibilities.

Offline

#8 2020-09-25 15:46:38

Khere
Member
From: Italy
Registered: 2020-03-04
Posts: 170

Re: Another fresh install... Another PulseAudio problem...

I had the same problem and i solved it with :

killall pulseaudio
rm -r ~/.config/pulse/*
rm -r ~/.pulse*

Fan of Giorgio Moroder & Mohammad Ammax enemy

Offline

#9 2020-09-25 16:05:46

asmitir
Member
Registered: 2020-09-24
Posts: 18

Re: Another fresh install... Another PulseAudio problem...

V1del wrote:

In this case since the card that's actually of interest is on index 1 -c1 would be more useful (.. check with aplay -l you need the index of the card where you want output from)

here is the output from c1:

Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 64
  Mono: Playback 44 [69%] [-20.00dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [on]
  Front Right: Playback [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 64
  Mono:
  Front Left: Playback 64 [100%] [0.00dB] [on]
  Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Front Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Surround',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 64
  Mono:
  Front Left: Playback 64 [100%] [0.00dB] [on]
  Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 64
  Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 64
  Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 31
  Front Left: Capture 18 [58%] [13.50dB] [on]
  Front Right: Capture 18 [58%] [13.50dB] [on]
Simple mixer control 'Capture',1
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 31
  Front Left: Capture 0 [0%] [-13.50dB] [off]
  Front Right: Capture 0 [0%] [-13.50dB] [off]
Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Enabled'
Simple mixer control 'Channel Mode',0
  Capabilities: enum
  Items: '2ch' '4ch' '6ch'
  Item0: '2ch'
Simple mixer control 'Input Source',0
  Capabilities: cenum
  Items: 'Front Mic' 'Rear Mic' 'Line'
  Item0: 'Line'
Simple mixer control 'Input Source',1
  Capabilities: cenum
  Items: 'Front Mic' 'Rear Mic' 'Line'
  Item0: 'Front Mic'
Simple mixer control 'Loopback Mixing',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
Simple mixer control 'Rear Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Rear Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]

Yes! i recive an output from "speaker-test -c2 -Dhw:1"
here it is:

speaker-test 1.2.3

Playback device is hw:1
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 8544000
Period size range from 32 to 4272000
Using max buffer size 8544000
Periods = 4
Unable to set hw params for playback: Cannot allocate memory
Setting of hwparams failed: Cannot allocate memory

Offline

#10 2020-09-25 16:06:33

asmitir
Member
Registered: 2020-09-24
Posts: 18

Re: Another fresh install... Another PulseAudio problem...

Khere wrote:

I had the same problem and i solved it with :

killall pulseaudio
rm -r ~/.config/pulse/*
rm -r ~/.pulse*

yea, i tried it sadly with no results sad

Offline

#11 2020-09-25 16:18:44

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,366

Re: Another fresh install... Another PulseAudio problem...

I rather meant, do you actually hear anything. But as it fails that doesn't seem to be the case, from the amixer options we have a few things left to juggle 

amixer -c1 set 'Line',0 50%,50%

(FWIW but I wouldn't hold my breath try 

speaker-test -c2 -r44100 -Dplughw:1 #... last resort even less likely to work, -Dfront:1

I'm leaning towards kernel issue, try the LTS kernel. Just to cover everything, linux-firmware is installed?

Offline

#12 2020-09-25 16:49:57

asmitir
Member
Registered: 2020-09-24
Posts: 18

Re: Another fresh install... Another PulseAudio problem...

V1del wrote:

I rather meant, do you actually hear anything. But as it fails that doesn't seem to be the case, from the amixer options we have a few things left to juggle 

amixer -c1 set 'Line',0 50%,50%

(FWIW but I wouldn't hold my breath try 

speaker-test -c2 -r44100 -Dplughw:1 #... last resort even less likely to work, -Dfront:1

I'm leaning towards kernel issue, try the LTS kernel. Just to cover everything, linux-firmware is installed?

Yeaa, dont hear a thing hmm

output from amixer -c1 set 'Line',0 50%,50%:

Simple mixer control 'Line',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 16 [52%] [-10.50dB] [off]
  Front Right: Playback 16 [52%] [-10.50dB] [off]

output from speaker-test -c2 -r44100 -Dplughw:1:

speaker-test 1.2.3

Playback device is plughw:1
Stream parameters are 44100Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 44100Hz (requested 44100Hz)
Buffer size range from 64 to 7849792
Period size range from 32 to 3924896
Using max buffer size 7849792
Periods = 4
was set period_size = 3924896
was set buffer_size = 7849792
 0 - Front Left
 1 - Front Right
Time per period = 178.181473

Yes! i hear noise on the left, after a while nose on the right too.

Just to cover everything, linux-firmware is installed?

i belive, yes.

Last edited by asmitir (2020-09-25 16:50:38)

Offline

#13 2020-09-25 19:46:47

euromatlox
Member
Registered: 2017-02-10
Posts: 154

Re: Another fresh install... Another PulseAudio problem...

Alsamixer automute option ? I have it enabled, and sound works, but some have solved audio problems by disabling automute.

To save settings 

sudo alsactl store

More alsa information in Arch Wiki.

Last edited by euromatlox (2020-09-25 19:57:31)

Offline

Pages: 1

Board footer

Powered by FluxBB