You are not logged in.
- Topics: Active | Unanswered
#1 2020-09-29 08:48:42
- riveravaldez
- Member
- Registered: 2016-11-18
- Posts: 27
[SOLVED] Keyboard and mousepad lagging with all linux-5.8 series
Hi, I've been having this issue with all the kernels 5.8.x.
Booting is OK and system seems fine until
$ startx is executed.
Once video-server is running, Openbox loads fine, but then the mousepad starts malfunctioning (it hangs once and again, for a moment) and also the keyboard (keeping a key pressed in a terminal produces the expected output, for instance, the 'z' letter, but with regular pauses) making the system unusable.
I've been downgrading to the last well functioning kernel once and again for some time now:
$ uname -a
Linux arch 5.7.12-arch1-1 #1 SMP PREEMPT Fri, 31 Jul 2020 17:38:22 +0000 x86_64 GNU/LinuxBut I'm under the impression that it's starting to affect other aspects of system (webcam, etc.).
Last system-upgrade ended with this situation:
$ uname -a
Linux arch 5.8.12-arch1-1 #1 SMP PREEMPT Sat, 26 Sep 2020 21:42:58 +0000 x86_64 GNU/Linux
$ sudo dmesg
(...)
[ 23.690009] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200528/utaddress-204)
[ 23.690018] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.690023] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20200528/utaddress-204)
[ 23.690027] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204)
[ 23.690031] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.690032] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20200528/utaddress-204)
[ 23.690036] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204)
[ 23.690039] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.690041] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20200528/utaddress-204)
[ 23.690045] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204)
[ 23.690048] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
(...)
[ 24.318774] psmouse serio1: synaptics: queried max coordinates: x [..5398], y [..4728]
[ 24.393071] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0x8a0400/0x0, board id: 0, fw id: 662324
[ 24.439367] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
(...)
[ 27.150654] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200528/nsarguments-59)
[ 27.151099] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 27.151143] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200528/nsarguments-59)
[ 27.151528] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
(...)
[ 131.620980] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 134.136606] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.I have the full dmesg output, just selected some lines in the hope that those are relevant.
Any idea?
This is the hardware info:
$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 525M] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev ff)
03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] (rev 34)
04:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)$ sudo lshw
arch
description: Portable Computer
product: Dell System XPS L502X (System SKUNumber)
vendor: Dell Inc.
version: 0.1
serial: FRSTQQ1
width: 64 bits
capabilities: smbios-2.6 dmi-2.6 smp vsyscall32
configuration: administrator_password=unknown boot=normal chassis=portable family=HuronRiver System frontpanel_password=unknown keyboard_password=unknown power-on_password=unknown sku=System SKUNumber uuid=44454C4C-5200-1053-8054-C6C04F515131
*-core
description: Motherboard
product: 0YR8NN
vendor: Dell Inc.
physical id: 0
version: A00
serial: .FRSTQQ1.CN4864316P0810.
slot: Part Component
*-firmware
description: BIOS
vendor: Dell Inc.
physical id: 0
version: A05
date: 05/04/2011
size: 128KiB
capacity: 2560KiB
capabilities: pci pnp upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot smartbattery biosbootspecification netboot
*-cpu
description: CPU
product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
vendor: Intel Corp.
physical id: 19
bus info: cpu@0
version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
serial: Not Supported by CPU
slot: CPU
size: 823MHz
capacity: 2900MHz
width: 64 bits
clock: 100MHz
capabilities: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ht tm pbe syscall nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts md_clear flush_l1d cpufreq
configuration: cores=4 enabledcores=4 threads=8
*-cache:0
description: L1 cache
physical id: 1a
slot: L1-Cache
size: 64KiB
capacity: 64KiB
capabilities: synchronous internal write-through data
configuration: level=1
*-cache:1
description: L2 cache
physical id: 1b
slot: L2-Cache
size: 256KiB
capacity: 256KiB
capabilities: synchronous internal write-through data
configuration: level=2
*-cache:2
description: L3 cache
physical id: 1c
slot: L3-Cache
size: 6MiB
capacity: 6MiB
capabilities: synchronous internal write-back unified
configuration: level=3
*-memory
description: System Memory
physical id: 1d
slot: System board or motherboard
size: 6GiB
*-bank:0
description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns)
product: M471B5273DH0-CH9
vendor: Samsung
physical id: 0
serial: 971E3891
slot: ChannelA-DIMM0
size: 4GiB
width: 64 bits
clock: 1333MHz (0.8ns)
*-bank:1
description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns)
product: NT2GC64B88B0NS-CG
vendor: Nanya Technology
physical id: 1
serial: 23763588
slot: ChannelB-DIMM0
size: 2GiB
width: 64 bits
clock: 1333MHz (0.8ns)
*-pci
description: Host bridge
product: 2nd Generation Core Processor Family DRAM Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 09
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 09
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:24 ioport:3000(size=4096) memory:f0000000-f10fffff ioport:c0000000(size=301989888)
*-display
description: VGA compatible controller
product: GF108M [GeForce GT 525M]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
resources: irq:43 memory:f0000000-f0ffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:3000(size=128) memory:f1080000-f10fffff
*-multimedia
description: Audio device
product: GF108 High Definition Audio Controller
vendor: NVIDIA Corporation
physical id: 0.1
bus info: pci@0000:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:17 memory:f1000000-f1003fff
*-display
description: VGA compatible controller
product: 2nd Generation Core Processor Family Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 09
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:42 memory:f1400000-f17fffff memory:e0000000-efffffff ioport:4000(size=64) memory:c0000-dffff
*-communication
description: Communication controller
product: 6 Series/C200 Series Chipset Family MEI Controller #1
vendor: Intel Corporation
physical id: 16
bus info: pci@0000:00:16.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list
configuration: driver=mei_me latency=0
resources: irq:39 memory:f1c05000-f1c0500f
*-usb:0
description: USB controller
product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 05
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:16 memory:f1c0a000-f1c0a3ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 5.7.12-arch1-1 ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 5.07
capabilities: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: USB hub
product: Integrated Rate Matching Hub
vendor: Intel Corp.
physical id: 1
bus info: usb@1:1
version: 0.00
capabilities: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-usb
description: Video
product: Laptop_Integrated_Webcam_2HDM
vendor: CN07CN2C7866415U00B1A00
physical id: 4
bus info: usb@1:1.4
version: 9.01
capabilities: usb-2.00
configuration: driver=uvcvideo maxpower=250mA speed=480Mbit/s
*-multimedia
description: Audio device
product: 6 Series/C200 Series Chipset Family High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 05
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:44 memory:f1c00000-f1c03fff
*-pci:1
description: PCI bridge
product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: b5
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:25
*-pci:2
description: PCI bridge
product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2
vendor: Intel Corporation
physical id: 1c.1
bus info: pci@0000:00:1c.1
version: b5
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:26 memory:f1b00000-f1bfffff
*-network DISABLED
description: Wireless interface
product: Centrino Wireless-N 1030 [Rainbow Peak]
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlp3s0
version: 34
serial: ac:72:89:0b:a1:2b
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=5.7.12-arch1-1 firmware=18.168.6.1 6000g2b-6.ucode latency=0 link=no multicast=yes wireless=IEEE 802.11
resources: irq:41 memory:f1b00000-f1b01fff
*-pci:3
description: PCI bridge
product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4
vendor: Intel Corporation
physical id: 1c.3
bus info: pci@0000:00:1c.3
version: b5
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:27 memory:f1a00000-f1afffff
*-usb
description: USB controller
product: uPD720200 USB 3.0 Host Controller
vendor: NEC Corporation
physical id: 0
bus info: pci@0000:04:00.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pm msi msix pciexpress xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:19 memory:f1a00000-f1a01fff
*-usbhost:0
product: xHCI Host Controller
vendor: Linux 5.7.12-arch1-1 xhci-hcd
physical id: 0
bus info: usb@2
logical name: usb2
version: 5.07
capabilities: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: Printer
product: EPSON TX133 TX135 Series
vendor: EPSON
physical id: 2
bus info: usb@2:2
version: 1.00
serial: NBHK185220
capabilities: usb-2.00 bidirectional
configuration: driver=usblp maxpower=2mA speed=12Mbit/s
*-usbhost:1
product: xHCI Host Controller
vendor: Linux 5.7.12-arch1-1 xhci-hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 5.07
capabilities: usb-3.00
configuration: driver=hub slots=2 speed=5000Mbit/s
*-pci:4
description: PCI bridge
product: 6 Series/C200 Series Chipset Family PCI Express Root Port 5
vendor: Intel Corporation
physical id: 1c.4
bus info: pci@0000:00:1c.4
version: b5
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:28 memory:f1900000-f19fffff
*-pci:5
description: PCI bridge
product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6
vendor: Intel Corporation
physical id: 1c.5
bus info: pci@0000:00:1c.5
version: b5
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:29 ioport:2000(size=4096) ioport:f1800000(size=1048576)
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:06:00.0
logical name: enp6s0
version: 06
serial: 14:fe:b5:b8:11:13
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.7.12-arch1-1 duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:17 ioport:2000(size=256) memory:f1804000-f1804fff memory:f1800000-f1803fff
*-usb:1
description: USB controller
product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 05
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:23 memory:f1c09000-f1c093ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 5.7.12-arch1-1 ehci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 5.07
capabilities: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: USB hub
product: Integrated Rate Matching Hub
vendor: Intel Corp.
physical id: 1
bus info: usb@3:1
version: 0.00
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480Mbit/s
*-usb
description: Bluetooth wireless interface
product: Centrino Advanced-N 6230 Bluetooth adapter
vendor: Intel Corp.
physical id: 5
bus info: usb@3:1.5
version: 69.19
capabilities: bluetooth usb-2.00
configuration: driver=btusb speed=12Mbit/s
*-isa
description: ISA bridge
product: HM67 Express Chipset LPC Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 05
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-sata
description: SATA controller
product: 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 05
width: 32 bits
clock: 66MHz
capabilities: sata msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
resources: irq:30 ioport:4088(size=8) ioport:4094(size=4) ioport:4080(size=8) ioport:4090(size=4) ioport:4060(size=32) memory:f1c08000-f1c087ff
*-serial
description: SMBus
product: 6 Series/C200 Series Chipset Family SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 05
width: 64 bits
clock: 33MHz
configuration: driver=i801_smbus latency=0
resources: irq:18 memory:f1c04000-f1c040ff ioport:efa0(size=32)
*-pnp00:00
product: Motherboard registers
physical id: 1
capabilities: pnp
configuration: driver=system
*-pnp00:01
product: AT Real-Time Clock
physical id: 2
capabilities: pnp
configuration: driver=rtc_cmos
*-pnp00:02
product: PnP device INT3f0d
vendor: Interphase Corporation
physical id: 3
capabilities: pnp
configuration: driver=system
*-pnp00:03
product: IBM Enhanced keyboard controller (101/2-key)
physical id: 4
capabilities: pnp
configuration: driver=i8042 kbd
*-pnp00:04
product: PnP device DLL04b6
vendor: Dell Inc
physical id: 5
capabilities: pnp
configuration: driver=i8042 aux
*-pnp00:05
product: Motherboard registers
physical id: 6
capabilities: pnp
configuration: driver=systemThanks a lot in advance.
Last edited by riveravaldez (2021-03-10 10:36:54)
Offline
#2 2020-09-29 10:58:35
- Maniaxx
- Member
- Registered: 2014-05-14
- Posts: 738
Re: [SOLVED] Keyboard and mousepad lagging with all linux-5.8 series
Which graphics driver do you use? The NVidia proprietary one? Maybe try modesetting/glamour or legacy nouveau. Just to see if it changes something. Or switch/enforce the other graphic card.
Any cpu spikes visible? A high pollrate graph logger might be useful here.
Last edited by Maniaxx (2020-09-29 11:06:10)
sys2064
Offline
#3 2020-11-09 23:03:16
- riveravaldez
- Member
- Registered: 2016-11-18
- Posts: 27
Re: [SOLVED] Keyboard and mousepad lagging with all linux-5.8 series
Thanks a lot for your response, Maniaxx, and sorry for the delay, things are pretty quirky this days...
I'm under the impression that I'm not using the NVidia driver but nouveau:
$ pacman -Ss nvidia | grep inst
extra/libvdpau 1.4-1 [instalado]
extra/libxnvctrl 455.38-1 [instalado]
extra/xf86-video-nouveau 1.0.16-2 (xorg-drivers) [instalado]I have to read how to switch/enforce the other graphic card.
No CPU spikes visible. Don't know what's a "hight pollrate graph logger", any link to read about would be greatly welcome.
I've just tried kernel 5.9.4-arch1-1 with the same result. Maybe this dmesg lines help to understand the issue:
From kernel 5.7.12-arch1-1 (which works perfectly):
$ dmesg | grep nouveau
[ 32.091418] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 32.846810] nouveau 0000:01:00.0: NVIDIA GF108 (0c1a80a1)
[ 32.941331] nouveau 0000:01:00.0: bios: version 70.08.53.00.04
[ 33.057781] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[ 33.119869] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 33.119870] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 33.119875] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 33.119877] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 33.119879] nouveau 0000:01:00.0: DRM: DCB outp 00: 02014300 00000000
[ 33.119882] nouveau 0000:01:00.0: DRM: DCB outp 01: 02021362 00020010
[ 33.119884] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000340
[ 33.119885] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001061
[ 33.119887] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000147
[ 33.119888] nouveau 0000:01:00.0: DRM: DCB conn 03: 00002346
[ 33.119889] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000400
[ 33.119891] nouveau 0000:01:00.0: DRM: DCB conn 05: 00000210
[ 33.119892] nouveau 0000:01:00.0: DRM: DCB conn 06: 00000211
[ 33.119893] nouveau 0000:01:00.0: DRM: DCB conn 07: 00000213
[ 33.120845] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[ 33.158864] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo 0000000002a2630a
[ 33.159101] nouveau 0000:01:00.0: fb1: nouveaudrmfb frame buffer device
[ 33.159458] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 42.176380] nouveau 0000:01:00.0: fifo: INTR 00000001: 00000000
[ 42.176387] nouveau 0000:01:00.0: fifo: SCHED_ERROR 00 []
[ 42.176391] nouveau 0000:01:00.0: fifo: INTR 00010000: 00000000
[ 42.176394] nouveau 0000:01:00.0: fifo: INTR 01000000: 00000000
[ 42.176401] nouveau 0000:01:00.0: fifo: INTR 08800010
[ 42.176436] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 002100 [ !ENGINE ]And from kernel 5.9.4-arch1-1 (the last one, which has the issue):
[ 31.886369] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 31.886519] nouveau 0000:01:00.0: NVIDIA GF108 (0c1a80a1)
[ 31.971706] nouveau 0000:01:00.0: bios: version 70.08.53.00.04
[ 32.088124] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[ 32.149859] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 32.149860] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 32.149863] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 32.149865] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 32.149867] nouveau 0000:01:00.0: DRM: DCB outp 00: 02014300 00000000
[ 32.149868] nouveau 0000:01:00.0: DRM: DCB outp 01: 02021362 00020010
[ 32.149869] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000340
[ 32.149870] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001061
[ 32.149871] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000147
[ 32.149872] nouveau 0000:01:00.0: DRM: DCB conn 03: 00002346
[ 32.149873] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000400
[ 32.149874] nouveau 0000:01:00.0: DRM: DCB conn 05: 00000210
[ 32.149875] nouveau 0000:01:00.0: DRM: DCB conn 06: 00000211
[ 32.149876] nouveau 0000:01:00.0: DRM: DCB conn 07: 00000213
[ 32.150718] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[ 32.151087] nouveau 0000:01:00.0: disp: ERROR 5 [INVALID_STATE] 08 [] chid 0 mthd 008c data 00000000
[ 32.188886] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo 00000000c914f0cb
[ 32.189050] nouveau 0000:01:00.0: [drm] fb1: nouveaudrmfb frame buffer device
[ 32.208527] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 32.255604] nouveau 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=noneThe first 19 lines are the same. Any hint?
Thanks a lot again!
Offline
#4 2020-11-10 02:34:26
- riveravaldez
- Member
- Registered: 2016-11-18
- Posts: 27
Re: [SOLVED] Keyboard and mousepad lagging with all linux-5.8 series
Also found some info from when I tried kernel 5.8.14-arch1-1 (I handpicked what seemed to me like possible relevant warnings in journalctl and dmesg):
$ journalctl
...
oct 11 19:09:19 arch kernel: pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
oct 11 19:09:19 arch kernel: acpi_call: loading out-of-tree module taints kernel.
oct 11 19:09:19 arch kernel: acpi_call: module verification failed: signature and/or required key missing - tainting kernel
oct 11 19:09:40 arch kernel: wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
oct 11 19:09:40 arch kernel: ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO)>
oct 11 19:09:40 arch kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
oct 11 19:09:40 arch kernel: ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.P>
oct 11 19:09:40 arch kernel: ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO)>
oct 11 19:09:40 arch kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
oct 11 19:09:40 arch kernel: ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.P>
oct 11 19:09:40 arch kernel: ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO)>
oct 11 19:09:40 arch kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
oct 11 19:09:40 arch kernel: ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.P>
oct 11 19:09:40 arch kernel: ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO)>
oct 11 19:09:40 arch kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
oct 11 19:09:40 arch kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
oct 11 19:09:41 arch kernel: ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200528/nsarguments-59)
oct 11 19:09:41 arch kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200528/nsarguments-59)
oct 11 19:09:41 arch kernel: nouveau 0000:01:00.0: disp: ERROR 5 [INVALID_STATE] 08 [] chid 0 mthd 008c data 00000000
...$ dmesg | grep nouveau
[ 27.733779] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 27.733780] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 27.733783] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 27.733785] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 27.733787] nouveau 0000:01:00.0: DRM: DCB outp 00: 02014300 00000000
[ 27.733788] nouveau 0000:01:00.0: DRM: DCB outp 01: 02021362 00020010
[ 27.733790] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000340
[ 27.733791] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001061
[ 27.733791] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000147
[ 27.733792] nouveau 0000:01:00.0: DRM: DCB conn 03: 00002346
[ 27.733793] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000400
[ 27.733794] nouveau 0000:01:00.0: DRM: DCB conn 05: 00000210
[ 27.733795] nouveau 0000:01:00.0: DRM: DCB conn 06: 00000211
[ 27.733796] nouveau 0000:01:00.0: DRM: DCB conn 07: 00000213
[ 27.734568] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[ 27.734908] nouveau 0000:01:00.0: disp: ERROR 5 [INVALID_STATE] 08 [] chid 0 mthd 008c data 00000000
[ 27.735160] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 27.772860] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo 000000002f955f4e
[ 27.773054] nouveau 0000:01:00.0: fb1: nouveaudrmfb frame buffer device
[ 27.773479] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1$ ... | grep psmouse
[ 23.766935] psmouse serio1: synaptics: queried max coordinates: x [..5398], y [..4728]
[ 23.838415] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0x8a0400/0x0, board id: 0, fw id: 662324
[ 725.636562] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 806.184837] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 972.395702] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 974.911414] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 984.981044] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 995.046918] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 1017.673887] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 1070.506872] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 1080.576827] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 1125.885581] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 1138.466498] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 1146.021022] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 1158.603222] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 1168.666892] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 1173.701064] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 1176.218117] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 1196.365059] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 1435.320802] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 1556.175780] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 1561.211847] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 1568.759707] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 1576.308772] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 1664.375063] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 1671.924222] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 1676.956650] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 1679.475031] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 2856.408701] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 2879.059220] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 2941.917027] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 2946.949351] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 2949.465221] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 2972.093790] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3148.113588] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 3153.154047] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 3165.740044] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 3168.257910] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3173.287260] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 3183.353480] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 3190.904554] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3195.934856] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3198.452098] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3203.483637] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3208.513449] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3213.543508] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3221.087955] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3233.663382] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3236.180041] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3273.939118] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 3291.552432] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3294.069701] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3316.780816] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3319.298489] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3339.426663] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 3344.456261] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3346.971918] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3354.516996] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 3362.066453] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 3364.584217] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3365.112608] psmouse serio1: resync failed, issuing reconnect request
[ 3365.788217] psmouse serio1: synaptics: queried max coordinates: x [..5398], y [..4728]
[ 3369.615527] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3374.645136] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3377.161977] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3387.223145] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3392.252864] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3394.769643] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 3399.800240] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3399.835572] psmouse serio1: resync failed, issuing reconnect request
[ 3400.517523] psmouse serio1: synaptics: queried max coordinates: x [..5398], y [..4728]
[ 3404.830422] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3414.896920] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3437.553599] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3440.070851] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3445.103810] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3447.619713] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3450.137589] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 3452.658888] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3452.697477] psmouse serio1: resync failed, issuing reconnect request
[ 3453.377370] psmouse serio1: synaptics: queried max coordinates: x [..5398], y [..4728]
[ 3457.690371] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3470.266704] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3475.295837] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 3482.853966] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 3490.398440] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 3492.919058] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3508.007717] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3513.041080] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 3515.557596] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3520.590058] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3525.622369] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3528.139222] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3530.657029] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 3560.876608] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 3565.908134] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3591.063318] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3606.173294] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[ 3608.690397] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3613.726722] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3621.271948] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 3626.304015] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 3654.029698] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.I guess those "lost synchronization" are related to mousepad stop working for some seconds?
Thanks for any help.
Offline
#5 2020-11-10 22:56:27
- Maniaxx
- Member
- Registered: 2014-05-14
- Posts: 738
Re: [SOLVED] Keyboard and mousepad lagging with all linux-5.8 series
Can you post /var/log/Xorg.0.log?
Try to uninstall 'xf86-video-nouveau' and restart. After that it should run on kernel modesetting/glamour.
If that doesn't help, the next attempt would be to install 'nvidia' (the proprietary driver). Usually the best the most complete driver for nvidia cards.
Its just a wild guess though switching the gfx drivers. The xorg log hopefully brings more substance.
Last edited by Maniaxx (2020-11-10 23:05:52)
sys2064
Offline
#6 2020-11-11 01:13:15
- riveravaldez
- Member
- Registered: 2016-11-18
- Posts: 27
Re: [SOLVED] Keyboard and mousepad lagging with all linux-5.8 series
Seems like I don't have a /var/log/Xorg.0.log file:
$ ls -a /var/log/
. btmp faillog lastlog pacman.log tallylog wtmp.1
.. btmp.1 gufw.log libvirt private wicd xmms2d.log
audit cups journal old swtpm wtmpLooking at https://wiki.archlinux.org/index.php/Xorg found that there's also ~/.local/share/xorg/Xorg.log location in which I have these:
$ ls -a .local/share/xorg/
. .. Xorg.0.log Xorg.0.log.old Xorg.1.log Xorg.1.log.oldSo, this is the content of that Xorg.0.log (running kernel 5.7.12 with which everything is fine, let me know if I should boot on the newest kernel and post again):
[ 114.099] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 114.100]
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[ 114.101] Build Operating System: Linux Arch Linux
[ 114.101] Current Operating System: Linux arch 5.7.12-arch1-1 #1 SMP PREEMPT Fri, 31 Jul 2020 17:38:22 +0000 x86_64
[ 114.101] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d6a21077-27ac-4367-bcf2-518dd867e1f8 rw quiet
[ 114.102] Build Date: 02 September 2020 06:17:44AM
[ 114.102]
[ 114.102] Current version of pixman: 0.40.0
[ 114.102] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 114.102] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 114.104] (==) Log file: "/home/dell/.local/share/xorg/Xorg.0.log", Time: Fri Nov 6 13:13:33 2020
[ 114.153] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 114.153] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 114.230] (==) No Layout section. Using the first Screen section.
[ 114.230] (==) No screen section available. Using defaults.
[ 114.230] (**) |-->Screen "Default Screen Section" (0)
[ 114.230] (**) | |-->Monitor "<default monitor>"
[ 114.231] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 114.231] (==) Automatically adding devices
[ 114.231] (==) Automatically enabling devices
[ 114.231] (==) Automatically adding GPU devices
[ 114.231] (==) Automatically binding GPU devices
[ 114.231] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 114.248] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 114.248] Entry deleted from font path.
[ 114.248] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 114.248] Entry deleted from font path.
[ 114.248] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 114.249] Entry deleted from font path.
[ 114.249] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF
[ 114.249] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 114.249] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 114.249] (II) Module ABI versions:
[ 114.249] X.Org ANSI C Emulation: 0.4
[ 114.249] X.Org Video Driver: 24.1
[ 114.249] X.Org XInput driver : 24.1
[ 114.249] X.Org Server Extension : 10.0
[ 114.251] (++) using VT number 1
[ 114.257] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 114.260] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 114.260] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[ 114.263] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[ 114.263] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 114.263] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 114.265] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 114.270] (--) PCI:*(0@0:2:0) 8086:0116:1028:04b6 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[ 114.270] (--) PCI: (1@0:0:0) 10de:0df5:1028:04b6 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 114.270] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 114.270] (II) LoadModule: "glx"
[ 114.328] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 114.510] (II) Module glx: vendor="X.Org Foundation"
[ 114.510] compiled for 1.20.9, module version = 1.0.0
[ 114.510] ABI class: X.Org Server Extension, version 10.0
[ 114.510] (==) Matched intel as autoconfigured driver 0
[ 114.510] (==) Matched nouveau as autoconfigured driver 1
[ 114.510] (==) Matched nv as autoconfigured driver 2
[ 114.510] (==) Matched modesetting as autoconfigured driver 3
[ 114.510] (==) Matched fbdev as autoconfigured driver 4
[ 114.510] (==) Matched vesa as autoconfigured driver 5
[ 114.510] (==) Assigned the driver to the xf86ConfigLayout
[ 114.510] (II) LoadModule: "intel"
[ 114.528] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 114.774] (II) Module intel: vendor="X.Org Foundation"
[ 114.774] compiled for 1.20.8, module version = 2.99.917
[ 114.775] Module class: X.Org Video Driver
[ 114.775] ABI class: X.Org Video Driver, version 24.1
[ 114.775] (II) LoadModule: "nouveau"
[ 114.775] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 114.796] (II) Module nouveau: vendor="X.Org Foundation"
[ 114.796] compiled for 1.20.8, module version = 1.0.16
[ 114.796] Module class: X.Org Video Driver
[ 114.796] ABI class: X.Org Video Driver, version 24.1
[ 114.797] (II) LoadModule: "nv"
[ 114.797] (WW) Warning, couldn't open module nv
[ 114.797] (EE) Failed to load module "nv" (module does not exist, 0)
[ 114.797] (II) LoadModule: "modesetting"
[ 114.797] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 114.809] (II) Module modesetting: vendor="X.Org Foundation"
[ 114.809] compiled for 1.20.9, module version = 1.20.9
[ 114.809] Module class: X.Org Video Driver
[ 114.809] ABI class: X.Org Video Driver, version 24.1
[ 114.809] (II) LoadModule: "fbdev"
[ 114.810] (WW) Warning, couldn't open module fbdev
[ 114.810] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 114.810] (II) LoadModule: "vesa"
[ 114.810] (WW) Warning, couldn't open module vesa
[ 114.810] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 114.810] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 114.811] (II) intel: Driver for Intel(R) HD Graphics
[ 114.811] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 114.811] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 114.811] (II) NOUVEAU driver
[ 114.811] (II) NOUVEAU driver for NVIDIA chipset families :
[ 114.811] RIVA TNT (NV04)
[ 114.811] RIVA TNT2 (NV05)
[ 114.811] GeForce 256 (NV10)
[ 114.811] GeForce 2 (NV11, NV15)
[ 114.811] GeForce 4MX (NV17, NV18)
[ 114.812] GeForce 3 (NV20)
[ 114.812] GeForce 4Ti (NV25, NV28)
[ 114.812] GeForce FX (NV3x)
[ 114.812] GeForce 6 (NV4x)
[ 114.812] GeForce 7 (G7x)
[ 114.812] GeForce 8 (G8x)
[ 114.812] GeForce 9 (G9x)
[ 114.812] GeForce GTX 2xx/3xx (GT2xx)
[ 114.812] GeForce GTX 4xx/5xx (GFxxx)
[ 114.812] GeForce GTX 6xx/7xx (GKxxx)
[ 114.812] GeForce GTX 9xx (GMxxx)
[ 114.812] GeForce GTX 10xx (GPxxx)
[ 114.812] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 114.813] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 114.814] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20200313
[ 114.814] (II) intel(0): SNA compiled from 2.99.917-908-g7181c5a4
[ 114.862] (WW) Falling back to old probe method for modesetting
[ 114.862] (II) [drm] nouveau interface version: 1.3.1
[ 114.862] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 114.864] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 114.864] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 4 threads
[ 114.864] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 114.864] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 114.864] (==) intel(0): RGB weight 888
[ 114.864] (==) intel(0): Default visual is TrueColor
[ 114.883] (II) intel(0): Output LVDS1 has no monitor section
[ 114.884] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 114.884] (II) intel(0): Enabled output LVDS1
[ 114.884] (II) intel(0): Output VGA1 has no monitor section
[ 114.885] (II) intel(0): Enabled output VGA1
[ 114.885] (II) intel(0): Output HDMI1 has no monitor section
[ 114.885] (II) intel(0): Enabled output HDMI1
[ 114.885] (II) intel(0): Output DP1 has no monitor section
[ 114.886] (II) intel(0): Enabled output DP1
[ 114.886] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 114.886] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 114.886] (II) intel(0): Enabled output VIRTUAL1
[ 114.887] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 114.887] (==) intel(0): TearFree disabled
[ 114.887] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 114.887] (==) intel(0): DPI set to (96, 96)
[ 114.887] (II) Loading sub module "dri3"
[ 114.887] (II) LoadModule: "dri3"
[ 114.887] (II) Module "dri3" already built-in
[ 114.887] (II) Loading sub module "dri2"
[ 114.887] (II) LoadModule: "dri2"
[ 114.887] (II) Module "dri2" already built-in
[ 114.887] (II) Loading sub module "present"
[ 114.887] (II) LoadModule: "present"
[ 114.887] (II) Module "present" already built-in
[ 114.887] (II) Loading sub module "dri2"
[ 114.887] (II) LoadModule: "dri2"
[ 114.887] (II) Module "dri2" already built-in
[ 114.888] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[ 114.888] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 114.888] (==) NOUVEAU(G0): RGB weight 888
[ 114.888] (==) NOUVEAU(G0): Default visual is TrueColor
[ 114.888] (==) NOUVEAU(G0): Using HW cursor
[ 114.888] (==) NOUVEAU(G0): Allowed maximum DRI level 2.
[ 114.888] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[ 114.888] (==) NOUVEAU(G0): Page flipping enabled
[ 114.888] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[ 114.888] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[ 114.888] (II) NOUVEAU(G0): Initializing outputs ...
[ 114.912] (II) NOUVEAU(G0): Output VGA-1-2 has no monitor section
[ 114.913] (II) NOUVEAU(G0): Output HDMI-1-2 has no monitor section
[ 114.913] (II) NOUVEAU(G0): 2 crtcs needed for screen.
[ 114.913] (II) NOUVEAU(G0): Allocated crtc nr. 0 to this screen.
[ 114.913] (II) NOUVEAU(G0): Allocated crtc nr. 1 to this screen.
[ 114.945] (II) NOUVEAU(G0): EDID for output VGA-1-2
[ 114.945] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-2
[ 114.945] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 114.945] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 114.945] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 114.945] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 114.945] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 114.946] (II) NOUVEAU(G0): EDID for output HDMI-1-2
[ 114.946] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 114.946] (II) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 114.946] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 114.946] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 114.946] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 114.946] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 114.946] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 114.946] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 114.946] (**) NOUVEAU(G0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 114.946] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 114.946] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 114.946] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 114.946] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 114.946] (II) Loading sub module "fb"
[ 114.946] (II) LoadModule: "fb"
[ 114.946] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 114.965] (II) Module fb: vendor="X.Org Foundation"
[ 114.965] compiled for 1.20.9, module version = 1.0.0
[ 114.965] ABI class: X.Org ANSI C Emulation, version 0.4
[ 114.965] (II) Loading sub module "shadowfb"
[ 114.965] (II) LoadModule: "shadowfb"
[ 114.965] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 114.973] (II) Module shadowfb: vendor="X.Org Foundation"
[ 114.973] compiled for 1.20.9, module version = 1.0.0
[ 114.973] ABI class: X.Org ANSI C Emulation, version 0.4
[ 114.973] (II) UnloadModule: "modesetting"
[ 114.973] (II) Unloading modesetting
[ 115.006] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 115.006] (==) intel(0): Backing store enabled
[ 115.006] (==) intel(0): Silken mouse disabled
[ 115.006] (II) intel(0): HW Cursor enabled
[ 115.021] (==) intel(0): DPMS enabled
[ 115.021] (==) intel(0): Display hotplug detection enabled
[ 115.022] (II) intel(0): [DRI2] Setup complete
[ 115.022] (II) intel(0): [DRI2] DRI driver: i965
[ 115.022] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 115.022] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 115.022] (II) intel(0): hardware support for Present enabled
[ 115.025] (II) NOUVEAU(G0): Channel setup complete.
[ 115.026] (II) NOUVEAU(G0): [COPY] async initialised.
[ 115.026] (II) NOUVEAU(G0): Hardware support for Present enabled
[ 115.026] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 115.026] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 115.026] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 115.026] (II) Loading sub module "exa"
[ 115.026] (II) LoadModule: "exa"
[ 115.026] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 115.034] (II) Module exa: vendor="X.Org Foundation"
[ 115.034] compiled for 1.20.9, module version = 2.6.0
[ 115.034] ABI class: X.Org Video Driver, version 24.1
[ 115.034] (II) EXA(256): Driver allocated offscreen pixmaps
[ 115.034] (II) EXA(256): Driver registered support for the following operations:
[ 115.034] (II) Solid
[ 115.034] (II) Copy
[ 115.034] (II) Composite (RENDER acceleration)
[ 115.034] (II) UploadToScreen
[ 115.034] (II) DownloadFromScreen
[ 115.034] (==) NOUVEAU(G0): Backing store enabled
[ 115.034] (==) NOUVEAU(G0): Silken mouse disabled
[ 115.034] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 115.034] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 115.034] (==) NOUVEAU(G0): DPMS enabled
[ 115.035] (II) Initializing extension Generic Event Extension
[ 115.035] (II) Initializing extension SHAPE
[ 115.035] (II) Initializing extension MIT-SHM
[ 115.035] (II) Initializing extension XInputExtension
[ 115.063] (II) Initializing extension XTEST
[ 115.063] (II) Initializing extension BIG-REQUESTS
[ 115.063] (II) Initializing extension SYNC
[ 115.064] (II) Initializing extension XKEYBOARD
[ 115.064] (II) Initializing extension XC-MISC
[ 115.064] (II) Initializing extension SECURITY
[ 115.064] (II) Initializing extension XFIXES
[ 115.064] (II) Initializing extension RENDER
[ 115.064] (II) Initializing extension RANDR
[ 115.064] (II) Initializing extension COMPOSITE
[ 115.064] (II) Initializing extension DAMAGE
[ 115.064] (II) Initializing extension MIT-SCREEN-SAVER
[ 115.064] (II) Initializing extension DOUBLE-BUFFER
[ 115.064] (II) Initializing extension RECORD
[ 115.064] (II) Initializing extension DPMS
[ 115.064] (II) Initializing extension Present
[ 115.064] (II) Initializing extension DRI3
[ 115.065] (II) Initializing extension X-Resource
[ 115.065] (II) Initializing extension XVideo
[ 115.065] (II) Initializing extension XVideo-MotionCompensation
[ 115.065] (II) Initializing extension GLX
[ 115.762] (II) AIGLX: Loaded and initialized i965
[ 115.762] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 115.762] (II) Initializing extension XFree86-VidModeExtension
[ 115.762] (II) Initializing extension XFree86-DGA
[ 115.762] (II) Initializing extension XFree86-DRI
[ 115.762] (II) Initializing extension DRI2
[ 115.764] (II) NOUVEAU(G0): NVEnterVT is called.
[ 115.823] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 115.829] (II) intel(0): Setting screen physical size to 361 x 203
[ 116.415] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 116.415] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 116.415] (**) Power Button: Applying InputClass "system-keyboard"
[ 116.415] (II) LoadModule: "libinput"
[ 116.415] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 116.463] (II) Module libinput: vendor="X.Org Foundation"
[ 116.463] compiled for 1.20.8, module version = 0.30.0
[ 116.463] Module class: X.Org XInput Driver
[ 116.463] ABI class: X.Org XInput driver, version 24.1
[ 116.463] (II) Using input driver 'libinput' for 'Power Button'
[ 116.466] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 18 paused 0
[ 116.466] (**) Power Button: always reports core events
[ 116.466] (**) Option "Device" "/dev/input/event3"
[ 116.466] (**) Option "_source" "server/udev"
[ 116.535] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 116.536] (II) event3 - Power Button: device is a keyboard
[ 116.536] (II) event3 - Power Button: device removed
[ 116.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 116.536] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 116.536] (**) Option "xkb_layout" "es"
[ 116.664] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 116.664] (II) event3 - Power Button: device is a keyboard
[ 116.666] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 116.666] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 116.666] (**) Video Bus: Applying InputClass "system-keyboard"
[ 116.666] (II) Using input driver 'libinput' for 'Video Bus'
[ 116.669] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 21 paused 0
[ 116.669] (**) Video Bus: always reports core events
[ 116.669] (**) Option "Device" "/dev/input/event13"
[ 116.669] (**) Option "_source" "server/udev"
[ 116.672] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 116.672] (II) event13 - Video Bus: device is a keyboard
[ 116.672] (II) event13 - Video Bus: device removed
[ 116.672] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event13"
[ 116.672] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 116.672] (**) Option "xkb_layout" "es"
[ 116.676] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 116.676] (II) event13 - Video Bus: device is a keyboard
[ 116.677] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 116.677] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 116.677] (**) Video Bus: Applying InputClass "system-keyboard"
[ 116.677] (II) Using input driver 'libinput' for 'Video Bus'
[ 116.680] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 22 paused 0
[ 116.680] (**) Video Bus: always reports core events
[ 116.680] (**) Option "Device" "/dev/input/event12"
[ 116.680] (**) Option "_source" "server/udev"
[ 116.681] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[ 116.681] (II) event12 - Video Bus: device is a keyboard
[ 116.681] (II) event12 - Video Bus: device removed
[ 116.681] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input13/event12"
[ 116.681] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 116.681] (**) Option "xkb_layout" "es"
[ 116.682] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[ 116.683] (II) event12 - Video Bus: device is a keyboard
[ 116.683] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 116.683] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 116.683] (**) Power Button: Applying InputClass "system-keyboard"
[ 116.683] (II) Using input driver 'libinput' for 'Power Button'
[ 116.685] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 23 paused 0
[ 116.685] (**) Power Button: always reports core events
[ 116.685] (**) Option "Device" "/dev/input/event0"
[ 116.685] (**) Option "_source" "server/udev"
[ 116.686] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 116.686] (II) event0 - Power Button: device is a keyboard
[ 116.686] (II) event0 - Power Button: device removed
[ 116.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 116.686] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 116.686] (**) Option "xkb_layout" "es"
[ 116.687] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 116.687] (II) event0 - Power Button: device is a keyboard
[ 116.688] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 116.688] (II) No input driver specified, ignoring this device.
[ 116.688] (II) This device may have been added with another device file.
[ 116.688] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 116.688] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 116.688] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 116.688] (II) Using input driver 'libinput' for 'Sleep Button'
[ 116.691] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 24 paused 0
[ 116.691] (**) Sleep Button: always reports core events
[ 116.691] (**) Option "Device" "/dev/input/event1"
[ 116.691] (**) Option "_source" "server/udev"
[ 116.692] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 116.692] (II) event1 - Sleep Button: device is a keyboard
[ 116.692] (II) event1 - Sleep Button: device removed
[ 116.692] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 116.692] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 116.692] (**) Option "xkb_layout" "es"
[ 116.693] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 116.693] (II) event1 - Sleep Button: device is a keyboard
[ 116.694] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[ 116.694] (II) No input driver specified, ignoring this device.
[ 116.694] (II) This device may have been added with another device file.
[ 116.694] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[ 116.694] (II) No input driver specified, ignoring this device.
[ 116.694] (II) This device may have been added with another device file.
[ 116.695] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 116.695] (II) No input driver specified, ignoring this device.
[ 116.695] (II) This device may have been added with another device file.
[ 116.695] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[ 116.695] (II) No input driver specified, ignoring this device.
[ 116.695] (II) This device may have been added with another device file.
[ 116.697] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM: (/dev/input/event14)
[ 116.697] (**) Laptop_Integrated_Webcam_2HDM: : Applying InputClass "libinput keyboard catchall"
[ 116.697] (**) Laptop_Integrated_Webcam_2HDM: : Applying InputClass "system-keyboard"
[ 116.697] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_2HDM: '
[ 116.699] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 25 paused 0
[ 116.699] (**) Laptop_Integrated_Webcam_2HDM: : always reports core events
[ 116.699] (**) Option "Device" "/dev/input/event14"
[ 116.699] (**) Option "_source" "server/udev"
[ 116.700] (II) event14 - Laptop_Integrated_Webcam_2HDM: : is tagged by udev as: Keyboard
[ 116.700] (II) event14 - Laptop_Integrated_Webcam_2HDM: : device is a keyboard
[ 116.701] (II) event14 - Laptop_Integrated_Webcam_2HDM: : device removed
[ 116.701] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input15/event14"
[ 116.701] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM: " (type: KEYBOARD, id 11)
[ 116.701] (**) Option "xkb_layout" "es"
[ 116.702] (II) event14 - Laptop_Integrated_Webcam_2HDM: : is tagged by udev as: Keyboard
[ 116.702] (II) event14 - Laptop_Integrated_Webcam_2HDM: : device is a keyboard
[ 116.703] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event15)
[ 116.703] (II) No input driver specified, ignoring this device.
[ 116.703] (II) This device may have been added with another device file.
[ 116.704] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event16)
[ 116.704] (II) No input driver specified, ignoring this device.
[ 116.704] (II) This device may have been added with another device file.
[ 116.704] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event17)
[ 116.704] (II) No input driver specified, ignoring this device.
[ 116.704] (II) This device may have been added with another device file.
[ 116.704] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event18)
[ 116.704] (II) No input driver specified, ignoring this device.
[ 116.704] (II) This device may have been added with another device file.
[ 116.705] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event19)
[ 116.705] (II) No input driver specified, ignoring this device.
[ 116.705] (II) This device may have been added with another device file.
[ 116.706] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 116.706] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 116.706] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[ 116.706] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 116.708] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 26 paused 0
[ 116.708] (**) Dell WMI hotkeys: always reports core events
[ 116.708] (**) Option "Device" "/dev/input/event7"
[ 116.708] (**) Option "_source" "server/udev"
[ 116.709] (II) event7 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 116.710] (II) event7 - Dell WMI hotkeys: device is a keyboard
[ 116.710] (II) event7 - Dell WMI hotkeys: device removed
[ 116.710] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input8/event7"
[ 116.710] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[ 116.710] (**) Option "xkb_layout" "es"
[ 116.711] (II) event7 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 116.711] (II) event7 - Dell WMI hotkeys: device is a keyboard
[ 116.712] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 116.712] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 116.712] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 116.712] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 116.715] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[ 116.715] (**) AT Translated Set 2 keyboard: always reports core events
[ 116.715] (**) Option "Device" "/dev/input/event4"
[ 116.715] (**) Option "_source" "server/udev"
[ 116.716] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 116.716] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 116.716] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 116.716] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 116.716] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 116.716] (**) Option "xkb_layout" "es"
[ 116.718] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 116.718] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 116.719] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 116.719] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 116.719] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 116.719] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 116.721] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 28 paused 0
[ 116.721] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 116.721] (**) Option "Device" "/dev/input/event6"
[ 116.721] (**) Option "_source" "server/udev"
[ 116.725] (II) event6 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 116.727] (II) event6 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 116.728] (II) event6 - SynPS/2 Synaptics TouchPad: device removed
[ 116.728] (**) Option "Tapping" "on"
[ 116.728] (**) Option "ScrollMethod" "edge"
[ 116.729] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event6"
[ 116.729] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 116.730] (**) Option "AccelerationScheme" "none"
[ 116.730] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 116.730] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 116.730] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 116.733] (II) event6 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 116.735] (II) event6 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 116.735] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 116.735] (II) No input driver specified, ignoring this device.
[ 116.735] (II) This device may have been added with another device file.
[ 116.736] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 116.736] (II) No input driver specified, ignoring this device.
[ 116.736] (II) This device may have been added with another device file.
[ 117.021] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 117.021] (II) intel(0): Printing DDC gathered Modelines:
[ 117.021] (II) intel(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 4883.819] (EE) event4 - AT Translated Set 2 keyboard: client bug: event processing lagging behind by 13ms, your system is too slow
[ 6133.367] (II) Axis 0x1 value 1229 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[ 25643.396] (II) Axis 0x1 value 1208 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[ 34087.421] (II) Axis 0x1 value 1220 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[ 37400.808] (II) Axis 0x1 value 1147 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[ 40321.210] (EE) event4 - AT Translated Set 2 keyboard: client bug: event processing lagging behind by 11ms, your system is too slow
[ 52887.959] (II) Axis 0x1 value 1208 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[ 89471.261] (II) Axis 0x1 value 1227 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[ 97631.670] (II) Axis 0x1 value 1161 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[100923.903] (EE) event6 - SynPS/2 Synaptics TouchPad: client bug: event processing lagging behind by 58ms, your system is too slow
[105517.462] (II) Axis 0x1 value 1203 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[109463.571] (II) Axis 0x1 value 1046 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[125711.995] (II) Axis 0x1 value 1236 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[171619.360] (II) Axis 0x1 value 1233 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[175031.596] (II) Axis 0x1 value 1213 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[182819.735] (II) Axis 0x1 value 1223 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[188635.005] (II) Axis 0x1 value 1100 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[196297.244] (II) Axis 0x1 value 1241 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[200749.824] (II) Axis 0x1 value 1031 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[259044.986] (II) Axis 0x1 value 1208 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[272147.643] (II) Axis 0x1 value 1077 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[277066.770] (EE) event6 - SynPS/2 Synaptics TouchPad: client bug: event processing lagging behind by 14ms, your system is too slow
[278483.501] (II) Axis 0x1 value 1182 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[282842.758] (II) Axis 0x1 value 1141 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[286519.099] (II) Axis 0x1 value 1182 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[293461.611] (II) Axis 0x1 value 1206 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[296243.081] (EE) event6 - SynPS/2 Synaptics TouchPad: client bug: event processing lagging behind by 12ms, your system is too slow
[345485.536] (EE) event6 - SynPS/2 Synaptics TouchPad: client bug: event processing lagging behind by 60ms, your system is too slow
[347675.072] (EE) event6 - SynPS/2 Synaptics TouchPad: client bug: event processing lagging behind by 58ms, your system is too slow
[364367.926] (II) Axis 0x1 value 1107 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[367614.253] (EE) event6 - SynPS/2 Synaptics TouchPad: client bug: event processing lagging behind by 12ms, your system is too slow
[367711.382] (II) Axis 0x1 value 1207 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for details
[374187.249] (II) Axis 0x1 value 1096 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.16.3/absolute_coordinate_ranges.html for detailsI would prefer, if possible, to avoid proprietary drivers and instead report bugs to help fix the libre ones... Hope this can be done.
Please, let me know about the Xorg.0.log file (if I have to post the one I have when running the kernels with issues).
Thanks a lot again.
Offline
#7 2020-11-11 10:47:53
- Maniaxx
- Member
- Registered: 2014-05-14
- Posts: 738
Re: [SOLVED] Keyboard and mousepad lagging with all linux-5.8 series
riveravaldez wrote:
I would prefer, if possible, to avoid proprietary drivers
The open source nvidia drivers are not in the best shape though. You're stuck on lowest frequency (power save) unless you switch manually, there might be vsync issues and they don't support all features (acceleration, opencl, cuda..).
The xf86-video-nouveau package is intended for very old cards only anyway. You shouldn't use it. Use the kernel modesetting drivers instead. It has opengl acceleration for xorg and is open source as well. Just uninstall the package.
But i would test the nvidia drivers anyway. It might be the culprit.
Other than that i don't know what's happening there. Maybe try xorg as root (exec startx) or 'threadirqs' kernel parameter.
Last edited by Maniaxx (2020-11-11 10:53:56)
sys2064
Offline
#8 2021-02-05 02:44:18
- riveravaldez
- Member
- Registered: 2016-11-18
- Posts: 27
Re: [SOLVED] Keyboard and mousepad lagging with all linux-5.8 series
Thanks a lot for your answers and information, Maniaxx!, I will try soon the drivers configuration you propose.
Doing some tests I've founded that the issue seems to be related to lm-sensors (or the `sensors` command, I don't know).
My system normally starts the WM and loads `psensor`, a graphic temperatures monitor with a notification area indicator.
When starting Openbox or IceWM without psensor the problem is not present (system works normally), and the problem reappears as soon as I start psensor (and it's present even in the other TTYs, Ctrl+Alt+Fn). Then I tried checking temperatures from terminal emulator with just `sensors` and the response is slow and the audio seems affected (if running JACK with PA modules the modules get lost and the audio connection fail). Considering that the keyword/mouse problem appeared in something like a 2 second interval (frequency), which is similar to the frequency psensor asks lm-sensors (I guess) for hardware temperature info, I'm supposing this is an issue between lm-sensors and the kernel, some kind of clash in the access to hardware?
System is updated. So, any recommendation/idea on how to proceed from here?
I'm not finding nothing informative in dmesg. How could I investigate this?
Should file a bug against lm_sensors?
Important (to me): should I change the subject of the post?
Any hint would be most welcomed. Thanks a lot!
Last edited by riveravaldez (2021-02-05 02:46:32)
Offline
#9 2021-03-10 10:42:13
- riveravaldez
- Member
- Registered: 2016-11-18
- Posts: 27
Re: [SOLVED] Keyboard and mousepad lagging with all linux-5.8 series
In an updated system with linux-5.11.4.arch1-1 and lm_sensors-1:3.6.0.r41.g31d1f125-1 the problem isn't present anymore.
Still couldn't find its source (already consulted with lm_sensors developers, waiting for some answer), but right now issue is SOLVED.
Thanks a lot for the help and advice!
Offline