You are not logged in.
I have an old asus laptop with a dual gpu, an nvidia gt740M and an integrated intel one.
There's no option to disable the nvidia gpu from the bios menu in the laptop.
$lspci
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 740M] (rev a1)I tried to disable the nvidia card from loading by creating an xorg.conf file with the following values
Section "Device"
Identifier "intel"
Driver "modesetting"
BusID "PCI:0:2:0"
EndSection on next boot I ran sensors to check the temps, it gave the following output
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +54.0°C (high = +87.0°C, crit = +105.0°C)
Core 0: +49.0°C (high = +87.0°C, crit = +105.0°C)
Core 1: +54.0°C (high = +87.0°C, crit = +105.0°C)
asus-isa-0000
Adapter: ISA adapter
cpu_fan: 2300 RPM
temp1: +51.0°C
acpitz-acpi-0
Adapter: ACPI interface
temp1: +51.0°C (crit = +108.0°C)
nouveau-pci-0100
Adapter: PCI adapter
GPU core: 850.00 mV (min = +0.81 V, max = +1.12 V)
temp1: +42.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)does nouveau-pci-0100 mean that nouveau driver is being used to handle the dual graphics.
I have not installed any packages out of the following nouveau, nvidia, nvidia-utils, bumblebee or bbswitch
Is nnouveau installed by default, and is there a better way to handle the integrated gpu and have an improved power management.
Offline
nouveau should disable the card pretty well, if you want to be sure use bbswitch and blacklist nouveau: https://wiki.archlinux.org/index.php/Bu … management
Offline