You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2020-10-22 22:18:29
- AmazingMarks
- Member
- Registered: 2019-08-30
- Posts: 13
My wireless interface has disappeared
Today my wireless interface has disappeared.
The driver has been loaded and is visible when I run...
lspci -kI discovered I now have 9 interfaces (i only have 1 eth port), and all of them but loopback are ethernet and I do not see the old wlp4s0 on the list?
ip linkI checked that the hardware was not bad on another machine so that's not the problem.
How do I fix this?
Last edited by AmazingMarks (2020-10-22 22:19:53)
Why doesn't this site support markdown?
Offline
#2 2020-10-22 22:35:43
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,859
Re: My wireless interface has disappeared
You omitted the lspci -k and ip link output, please also post the output of dmesg. What changed since the wireless interface was present for example a kernel update?
Offline
#3 2020-10-22 22:49:55
- AmazingMarks
- Member
- Registered: 2019-08-30
- Posts: 13
Re: My wireless interface has disappeared
loqs wrote:
You omitted the lspci -k and ip link output, please also post the output of dmesg. What changed since the wireless interface was present for example a kernel update?
00:00.0 Host bridge: Intel Corporation 8th/9th Gen Core 8-core Desktop Processor Host Bridge/DRAM Registers [Coffee Lake S] (rev 0a)
DeviceName: Onboard - Other
Subsystem: ASUSTeK Computer Inc. Device 8694
Kernel driver in use: skl_uncore
Kernel modules: ie31200_edac
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 0a)
Kernel driver in use: pcieport
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: ASUSTeK Computer Inc. Device 8694
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
DeviceName: Onboard - Other
Subsystem: ASUSTeK Computer Inc. Device 8694
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: ASUSTeK Computer Inc. Device 8694
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10)
DeviceName: Onboard - SATA
Subsystem: ASUSTeK Computer Inc. Device 8694
Kernel driver in use: ahci
Kernel modules: ahci
00:1b.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #17 (rev f0)
Kernel driver in use: pcieport
00:1c.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #1 (rev f0)
Kernel driver in use: pcieport
00:1c.7 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #8 (rev f0)
Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0)
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Z390 Chipset LPC/eSPI Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: ASUSTeK Computer Inc. Device 8694
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
DeviceName: Onboard - Sound
Subsystem: ASUSTeK Computer Inc. Device 8724
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_sof_pci
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: ASUSTeK Computer Inc. Device 8694
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: ASUSTeK Computer Inc. Device 8694
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-V (rev 10)
DeviceName: Onboard - Ethernet
Subsystem: ASUSTeK Computer Inc. Device 8672
Kernel driver in use: e1000e
Kernel modules: e1000e
01:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2080 Rev. A] (rev a1)
Subsystem: Gigabyte Technology Co., Ltd Device 37c5
Kernel modules: nouveau
01:00.1 Audio device: NVIDIA Corporation TU104 HD Audio Controller (rev a1)
Subsystem: Gigabyte Technology Co., Ltd Device 37c5
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
01:00.2 USB controller: NVIDIA Corporation TU104 USB 3.1 Host Controller (rev a1)
Subsystem: Gigabyte Technology Co., Ltd Device 37c5
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
01:00.3 Serial bus controller [0c80]: NVIDIA Corporation TU104 USB Type-C UCSI Controller (rev a1)
Subsystem: Gigabyte Technology Co., Ltd Device 37c5
Kernel driver in use: nvidia-gpu
Kernel modules: i2c_nvidia_gpu
04:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4360 802.11ac Wireless Network Adapter (rev 03)
Subsystem: Broadcom Inc. and subsidiaries Device 0619
Kernel modules: bcma1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 04:d4:c4:53:f4:5d brd ff:ff:ff:ff:ff:ff
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:8d:1b:df brd ff:ff:ff:ff:ff:ff
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master virbr0 state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:8d:1b:df brd ff:ff:ff:ff:ff:ff
5: br-1df8082e9ec3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default
link/ether 02:42:7e:f5:ce:5a brd ff:ff:ff:ff:ff:ff
6: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default
link/ether 02:42:d3:56:0a:98 brd ff:ff:ff:ff:ff:ff
7: virbr1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:f4:ce:51 brd ff:ff:ff:ff:ff:ff
8: virbr1-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master virbr1 state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:f4:ce:51 brd ff:ff:ff:ff:ff:ff
9: enp0s20f0u7c4i2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 8a:19:08:72:29:e0 brd ff:ff:ff:ff:ff:ff[ 0.000000] Linux version 5.4.72-1-lts (linux-lts@archlinux) (gcc version 10.2.0 (GCC)) #1 SMP Sat, 17 Oct 2020 13:30:57 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/sdc4
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000008ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000091000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008ce54fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ce55000-0x000000008e69bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008e69c000-0x000000008e9d2fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008e9d3000-0x000000008ea5efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008ea5f000-0x000000008f40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008f40f000-0x000000008f40ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008f410000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x816d1018-0x816f1057] usable ==> usable
[ 0.000000] e820: update [mem 0x816d1018-0x816f1057] usable ==> usable
[ 0.000000] e820: update [mem 0x816c0018-0x816d0e57] usable ==> usable
[ 0.000000] e820: update [mem 0x816c0018-0x816d0e57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x000000000008ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x0000000000090fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000091000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000816c0017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000816c0018-0x00000000816d0e57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000816d0e58-0x00000000816d1017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000816d1018-0x00000000816f1057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000816f1058-0x000000008ce54fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008ce55000-0x000000008e69bfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008e69c000-0x000000008e9d2fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000008e9d3000-0x000000008ea5efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008ea5f000-0x000000008f40efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008f40f000-0x000000008f40ffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008f410000-0x000000008fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000086dffffff] usable
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x8e96f000 ACPI=0x8e96f000 SMBIOS=0x8f193000 SMBIOS 3.0=0x8f192000 ESRT=0x8a5ae898 MEMATTR=0x8a8cf018
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: System manufacturer System Product Name/PRIME Z390-A, BIOS 1005 04/10/2019
[ 0.000000] tsc: Detected 3600.000 MHz processor
[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000013] last_pfn = 0x86e000 max_arch_pfn = 0x400000000
[ 0.000015] MTRR default type: write-back
[ 0.000016] MTRR fixed ranges enabled:
[ 0.000017] 00000-9FFFF write-back
[ 0.000017] A0000-BFFFF uncachable
[ 0.000018] C0000-FFFFF write-back
[ 0.000018] MTRR variable ranges enabled:
[ 0.000019] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000020] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000020] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000021] 3 base 2000000000 mask 6000000000 uncachable
[ 0.000021] 4 base 1000000000 mask 7000000000 uncachable
[ 0.000022] 5 base 4000000000 mask 4000000000 uncachable
[ 0.000022] 6 disabled
[ 0.000022] 7 disabled
[ 0.000023] 8 disabled
[ 0.000023] 9 disabled
[ 0.000265] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000358] last_pfn = 0x8f410 max_arch_pfn = 0x400000000
[ 0.006287] esrt: Reserving ESRT space from 0x000000008a5ae898 to 0x000000008a5ae8d0.
[ 0.006290] e820: update [mem 0x8a5ae000-0x8a5aefff] usable ==> reserved
[ 0.006299] check: Scanning 1 areas for low memory corruption
[ 0.006309] Using GB pages for direct mapping
[ 0.006720] Secure boot disabled
[ 0.006721] RAMDISK: [mem 0x3f61a000-0x3fffdfff]
[ 0.006727] ACPI: Early table checksum verification disabled
[ 0.006729] ACPI: RSDP 0x000000008E96F000 000024 (v02 ALASKA)
[ 0.006731] ACPI: XSDT 0x000000008E96F0B0 0000DC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006734] ACPI: FACP 0x000000008E9B4FA0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.006737] ACPI: DSDT 0x000000008E96F228 045D75 (v02 ALASKA A M I 01072009 INTL 20160527)
[ 0.006740] ACPI: FACS 0x000000008EA5E080 000040
[ 0.006741] ACPI: APIC 0x000000008E9B50B8 0000BC (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.006743] ACPI: FPDT 0x000000008E9B5178 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006744] ACPI: FIDT 0x000000008E9B51C0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006746] ACPI: MCFG 0x000000008E9B5260 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.006747] ACPI: WSMT 0x000000008E9C4F80 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006749] ACPI: SSDT 0x000000008E9B52F8 000378 (v01 SataRe SataTabl 00001000 INTL 20160527)
[ 0.006751] ACPI: SSDT 0x000000008E9B5670 0017D5 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
[ 0.006752] ACPI: SSDT 0x000000008E9B6E48 00309B (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
[ 0.006754] ACPI: SSDT 0x000000008E9B9EE8 002358 (v02 PegSsd PegSsdt 00001000 INTL 20160527)
[ 0.006755] ACPI: HPET 0x000000008E9BC240 000038 (v01 INTEL A M I 00000002 01000013)
[ 0.006757] ACPI: SSDT 0x000000008E9BC278 000F9E (v02 INTEL Ther_Rvp 00001000 INTL 20160527)
[ 0.006759] ACPI: SSDT 0x000000008E9BD218 002953 (v02 INTEL xh_cfsd4 00000000 INTL 20160527)
[ 0.006760] ACPI: UEFI 0x000000008E9BFB70 000048 (v01 ALASKA A M I 00000002 01000013)
[ 0.006762] ACPI: LPIT 0x000000008E9BFBB8 00005C (v01 INTEL A M I 00000002 01000013)
[ 0.006763] ACPI: SSDT 0x000000008E9BFC18 0027DE (v02 INTEL PtidDevc 00001000 INTL 20160527)
[ 0.006765] ACPI: SSDT 0x000000008E9C23F8 000FFE (v02 INTEL TbtTypeC 00000000 INTL 20160527)
[ 0.006767] ACPI: DBGP 0x000000008E9C33F8 000034 (v01 ALASKA A M I 00000002 01000013)
[ 0.006768] ACPI: DBG2 0x000000008E9C3430 000054 (v00 ALASKA A M I 00000002 01000013)
[ 0.006770] ACPI: SSDT 0x000000008E9C3488 001931 (v02 ALASKA UsbCTabl 00001000 INTL 20160527)
[ 0.006771] ACPI: SSDT 0x000000008E9C4DC0 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
[ 0.006773] ACPI: BGRT 0x000000008E9C4F08 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006774] ACPI: WPBT 0x000000008E9C4F40 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
[ 0.006779] ACPI: Local APIC address 0xfee00000
[ 0.006915] No NUMA configuration found
[ 0.006916] Faking a node at [mem 0x0000000000000000-0x000000086dffffff]
[ 0.006918] NODE_DATA(0) allocated [mem 0x86dffc000-0x86dffffff]
[ 0.006949] Zone ranges:
[ 0.006950] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.006951] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.006951] Normal [mem 0x0000000100000000-0x000000086dffffff]
[ 0.006952] Device empty
[ 0.006952] Movable zone start for each node
[ 0.006953] Early memory node ranges
[ 0.006953] node 0: [mem 0x0000000000001000-0x000000000008ffff]
[ 0.006954] node 0: [mem 0x0000000000091000-0x000000000009efff]
[ 0.006954] node 0: [mem 0x0000000000100000-0x000000008ce54fff]
[ 0.006955] node 0: [mem 0x000000008f40f000-0x000000008f40ffff]
[ 0.006955] node 0: [mem 0x0000000100000000-0x000000086dffffff]
[ 0.007063] Zeroed struct page in unavailable ranges: 21005 pages
[ 0.007064] Initmem setup node 0 [mem 0x0000000000001000-0x000000086dffffff]
[ 0.007065] On node 0 totalpages: 8367603
[ 0.007066] DMA zone: 64 pages used for memmap
[ 0.007066] DMA zone: 22 pages reserved
[ 0.007067] DMA zone: 3997 pages, LIFO batch:0
[ 0.007098] DMA32 zone: 8954 pages used for memmap
[ 0.007098] DMA32 zone: 573014 pages, LIFO batch:63
[ 0.013232] Normal zone: 121728 pages used for memmap
[ 0.013233] Normal zone: 7790592 pages, LIFO batch:63
[ 0.068127] ACPI: PM-Timer IO Port: 0x1808
[ 0.068129] ACPI: Local APIC address 0xfee00000
[ 0.068132] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.068133] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.068133] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.068133] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.068134] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.068134] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.068134] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.068135] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.068172] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.068173] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.068174] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.068175] ACPI: IRQ0 used by override.
[ 0.068175] ACPI: IRQ9 used by override.
[ 0.068177] Using ACPI (MADT) for SMP configuration information
[ 0.068177] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.068181] e820: update [mem 0x874dc000-0x8768cfff] usable ==> reserved
[ 0.068187] TSC deadline timer available
[ 0.068188] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.068199] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.068200] PM: Registered nosave memory: [mem 0x00090000-0x00090fff]
[ 0.068200] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.068201] PM: Registered nosave memory: [mem 0x816c0000-0x816c0fff]
[ 0.068202] PM: Registered nosave memory: [mem 0x816d0000-0x816d0fff]
[ 0.068203] PM: Registered nosave memory: [mem 0x816d1000-0x816d1fff]
[ 0.068203] PM: Registered nosave memory: [mem 0x816f1000-0x816f1fff]
[ 0.068204] PM: Registered nosave memory: [mem 0x874dc000-0x8768cfff]
[ 0.068205] PM: Registered nosave memory: [mem 0x8a5ae000-0x8a5aefff]
[ 0.068206] PM: Registered nosave memory: [mem 0x8ce55000-0x8e69bfff]
[ 0.068206] PM: Registered nosave memory: [mem 0x8e69c000-0x8e9d2fff]
[ 0.068207] PM: Registered nosave memory: [mem 0x8e9d3000-0x8ea5efff]
[ 0.068207] PM: Registered nosave memory: [mem 0x8ea5f000-0x8f40efff]
[ 0.068208] PM: Registered nosave memory: [mem 0x8f410000-0x8fffffff]
[ 0.068208] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[ 0.068209] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.068209] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.068209] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.068210] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.068210] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.068210] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.068210] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.068211] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[ 0.068211] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.068211] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.068212] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.068213] [mem 0x90000000-0xdfffffff] available for PCI devices
[ 0.068213] Booting paravirtualized kernel on bare hardware
[ 0.068215] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.137010] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.137140] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[ 0.137144] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[ 0.137144] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.137157] Built 1 zonelists, mobility grouping on. Total pages: 8236835
[ 0.137157] Policy zone: Normal
[ 0.137158] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/sdc4
[ 0.138412] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.139190] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.139240] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[ 0.141722] Calgary: detecting Calgary via BIOS EBDA area
[ 0.141724] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.186811] Memory: 32635136K/33470412K available (12291K kernel code, 1331K rwdata, 4004K rodata, 1708K init, 3396K bss, 835276K reserved, 0K cma-reserved)
[ 0.186816] random: get_random_u64 called from __kmem_cache_create+0x3e/0x600 with crng_init=0
[ 0.186900] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.186908] ftrace: allocating 37483 entries in 147 pages
[ 0.196963] rcu: Hierarchical RCU implementation.
[ 0.196964] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.196965] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.196965] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.198764] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[ 0.199163] Console: colour dummy device 80x25
[ 0.199165] printk: console [tty0] enabled
[ 0.199175] ACPI: Core revision 20190816
[ 0.199475] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.199564] APIC: Switch to symmetric I/O mode setup
[ 0.200943] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.206178] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.249529] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
[ 0.249532] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.00 BogoMIPS (lpj=36000000)
[ 0.249533] pid_max: default: 32768 minimum: 301
[ 0.252307] efi: memattr: Entry attributes invalid: RO and XP bits both cleared
[ 0.252309] efi: memattr: ! 0x000000090000-0x000000090fff [Runtime Code |RUN| | | | | | | | | | | ]
[ 0.253474] LSM: Security Framework initializing
[ 0.253477] Yama: becoming mindful.
[ 0.253523] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.253555] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.253562] *** VALIDATE tmpfs ***
[ 0.253656] *** VALIDATE proc ***
[ 0.253687] *** VALIDATE cgroup1 ***
[ 0.253688] *** VALIDATE cgroup2 ***
[ 0.253723] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.253746] process: using mwait in idle threads
[ 0.253747] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.253748] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.253749] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.253750] Spectre V2 : Mitigation: Full generic retpoline
[ 0.253750] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.253751] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.253751] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.253752] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.253753] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.253753] SRBDS: Vulnerable: No microcode
[ 0.253754] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.253971] Freeing SMP alternatives memory: 32K
[ 0.259590] smpboot: CPU0: Intel(R) Core(TM) i7-9700K CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0xc)
[ 0.259645] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.259649] ... version: 4
[ 0.259650] ... bit width: 48
[ 0.259650] ... generic registers: 8
[ 0.259650] ... value mask: 0000ffffffffffff
[ 0.259651] ... max period: 00007fffffffffff
[ 0.259651] ... fixed-purpose events: 3
[ 0.259651] ... event mask: 00000007000000ff
[ 0.259678] rcu: Hierarchical SRCU implementation.
[ 0.260150] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.260198] smp: Bringing up secondary CPUs ...
[ 0.260250] x86: Booting SMP configuration:
[ 0.260251] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.260650] smp: Brought up 1 node, 8 CPUs
[ 0.260650] smpboot: Max logical packages: 1
[ 0.260650] smpboot: Total of 8 processors activated (57600.00 BogoMIPS)
[ 0.260895] devtmpfs: initialized
[ 0.260895] x86/mm: Memory block size: 128MB
[ 0.262032] PM: Registering ACPI NVS region [mem 0x8e9d3000-0x8ea5efff] (573440 bytes)
[ 0.262032] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.262032] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.262032] pinctrl core: initialized pinctrl subsystem
[ 0.262032] PM: RTC time: 22:33:06, date: 2020-10-22
[ 0.262032] NET: Registered protocol family 16
[ 0.262032] audit: initializing netlink subsys (disabled)
[ 0.262032] audit: type=2000 audit(1603405986.070:1): state=initialized audit_enabled=0 res=1
[ 0.262032] cpuidle: using governor ladder
[ 0.262032] cpuidle: using governor menu
[ 0.262032] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.262032] ACPI: bus type PCI registered
[ 0.262032] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.262032] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.262032] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.262032] PCI: Using configuration type 1 for base access
[ 0.270173] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.270176] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.270176] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.270176] ACPI: Added _OSI(Module Device)
[ 0.270176] ACPI: Added _OSI(Processor Device)
[ 0.270176] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.270176] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.270176] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.270176] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.270176] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.335819] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.341058] ACPI: Dynamic OEM Table Load:
[ 0.341058] ACPI: SSDT 0xFFFF9E9B09FC1800 00078C (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.341060] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.341060] ACPI: Dynamic OEM Table Load:
[ 0.341060] ACPI: SSDT 0xFFFF9E9B099A1C00 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.342225] ACPI: Dynamic OEM Table Load:
[ 0.342228] ACPI: SSDT 0xFFFF9E9B0998B200 000133 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.343433] ACPI: Dynamic OEM Table Load:
[ 0.343436] ACPI: SSDT 0xFFFF9E9B09958000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.344543] ACPI: Dynamic OEM Table Load:
[ 0.344543] ACPI: SSDT 0xFFFF9E9B09B7E000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.349685] ACPI: Dynamic OEM Table Load:
[ 0.349688] ACPI: SSDT 0xFFFF9E9B099A5C00 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.350808] ACPI: Dynamic OEM Table Load:
[ 0.350808] ACPI: SSDT 0xFFFF9E9B09B6D400 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.352402] ACPI: EC: EC started
[ 0.352402] ACPI: EC: interrupt blocked
[ 0.352417] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.352418] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.352418] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.352419] ACPI: Interpreter enabled
[ 0.352453] ACPI: (supports S0 S3 S4 S5)
[ 0.352454] ACPI: Using IOAPIC for interrupt routing
[ 0.352486] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.353584] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.371364] ACPI: Power Resource [USBC] (on)
[ 0.374152] ACPI: Power Resource [V0PR] (on)
[ 0.374405] ACPI: Power Resource [V1PR] (on)
[ 0.374407] ACPI: Power Resource [V2PR] (on)
[ 0.374407] ACPI: Power Resource [WRST] (on)
[ 0.381640] ACPI: Power Resource [FN00] (off)
[ 0.381718] ACPI: Power Resource [FN01] (off)
[ 0.381792] ACPI: Power Resource [FN02] (off)
[ 0.381866] ACPI: Power Resource [FN03] (off)
[ 0.381940] ACPI: Power Resource [FN04] (off)
[ 0.382572] ACPI: Power Resource [PIN] (off)
[ 0.382975] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.382981] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.383162] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.383333] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.383333] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.384183] PCI host bridge to bus 0000:00
[ 0.384185] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.384185] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.384186] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.384187] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[ 0.384187] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.384188] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.384195] pci 0000:00:00.0: [8086:3e30] type 00 class 0x060000
[ 0.384541] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.384578] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.384864] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.384882] pci 0000:00:14.0: reg 0x10: [mem 0xa4520000-0xa452ffff 64bit]
[ 0.384936] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.385246] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.385246] pci 0000:00:14.2: reg 0x10: [mem 0xa4536000-0xa4537fff 64bit]
[ 0.385246] pci 0000:00:14.2: reg 0x18: [mem 0xa453c000-0xa453cfff 64bit]
[ 0.385246] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.385246] pci 0000:00:16.0: reg 0x10: [mem 0xa453b000-0xa453bfff 64bit]
[ 0.385246] pci 0000:00:16.0: PME# supported from D3hot
[ 0.385246] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[ 0.385246] pci 0000:00:17.0: reg 0x10: [mem 0xa4534000-0xa4535fff]
[ 0.385246] pci 0000:00:17.0: reg 0x14: [mem 0xa453a000-0xa453a0ff]
[ 0.385246] pci 0000:00:17.0: reg 0x18: [io 0x4050-0x4057]
[ 0.385246] pci 0000:00:17.0: reg 0x1c: [io 0x4040-0x4043]
[ 0.385246] pci 0000:00:17.0: reg 0x20: [io 0x4020-0x403f]
[ 0.385246] pci 0000:00:17.0: reg 0x24: [mem 0xa4539000-0xa45397ff]
[ 0.389552] pci 0000:00:17.0: PME# supported from D3hot
[ 0.389757] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[ 0.389840] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.390053] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
[ 0.390126] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.390332] pci 0000:00:1c.7: [8086:a33f] type 01 class 0x060400
[ 0.390407] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.390421] pci 0000:00:1c.7: PTM enabled (root), 4ns granularity
[ 0.390593] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[ 0.390676] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.390889] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100
[ 0.391186] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[ 0.391226] pci 0000:00:1f.3: reg 0x10: [mem 0xa4530000-0xa4533fff 64bit]
[ 0.391262] pci 0000:00:1f.3: reg 0x20: [mem 0xa4100000-0xa41fffff 64bit]
[ 0.391339] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.391669] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.391669] pci 0000:00:1f.4: reg 0x10: [mem 0xa4538000-0xa45380ff 64bit]
[ 0.391669] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.391669] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.391669] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.391669] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
[ 0.391669] pci 0000:00:1f.6: reg 0x10: [mem 0xa4500000-0xa451ffff]
[ 0.391669] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.391669] pci 0000:01:00.0: [10de:1e87] type 00 class 0x030000
[ 0.391669] pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
[ 0.391669] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.391669] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[ 0.391669] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.391669] pci 0000:01:00.0: reg 0x30: [mem 0xa4000000-0xa407ffff pref]
[ 0.391669] pci 0000:01:00.0: BAR 1: assigned to efifb
[ 0.391669] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.391669] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.391669] pci 0000:01:00.1: [10de:10f8] type 00 class 0x040300
[ 0.391669] pci 0000:01:00.1: reg 0x10: [mem 0xa4080000-0xa4083fff]
[ 0.391669] pci 0000:01:00.2: [10de:1ad8] type 00 class 0x0c0330
[ 0.391669] pci 0000:01:00.2: reg 0x10: [mem 0xa2000000-0xa203ffff 64bit pref]
[ 0.391669] pci 0000:01:00.2: reg 0x1c: [mem 0xa2040000-0xa204ffff 64bit pref]
[ 0.391669] pci 0000:01:00.2: PME# supported from D0 D3hot
[ 0.391669] pci 0000:01:00.3: [10de:1ad9] type 00 class 0x0c8000
[ 0.391669] pci 0000:01:00.3: reg 0x10: [mem 0xa4084000-0xa4084fff]
[ 0.391669] pci 0000:01:00.3: PME# supported from D0 D3hot
[ 0.391669] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.391669] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.391669] pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff]
[ 0.391669] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa20fffff 64bit pref]
[ 0.391669] acpiphp: Slot [1] registered
[ 0.391669] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ 0.391669] acpiphp: Slot [1-1] registered
[ 0.391669] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.391669] pci 0000:04:00.0: [14e4:43a0] type 00 class 0x028000
[ 0.391669] pci 0000:04:00.0: reg 0x10: [mem 0xa4400000-0xa4407fff 64bit]
[ 0.391669] pci 0000:04:00.0: reg 0x18: [mem 0xa4200000-0xa43fffff 64bit]
[ 0.391669] pci 0000:04:00.0: supports D1 D2
[ 0.391669] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.391669] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.391669] pci 0000:00:1c.7: bridge window [mem 0xa4200000-0xa44fffff]
[ 0.391669] acpiphp: Slot [1-2] registered
[ 0.391669] pci 0000:00:1d.0: PCI bridge to [bus 05]
[ 0.392818] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[ 0.392851] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[ 0.392882] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[ 0.392912] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[ 0.392942] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[ 0.392973] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[ 0.393003] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[ 0.393033] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[ 0.393604] ACPI: EC: interrupt unblocked
[ 0.393622] ACPI: EC: event unblocked
[ 0.393637] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.393637] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.393683] iommu: Default domain type: Translated
[ 0.393697] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.393697] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.393697] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.393697] vgaarb: loaded
[ 0.393697] ACPI: bus type USB registered
[ 0.393697] usbcore: registered new interface driver usbfs
[ 0.393697] usbcore: registered new interface driver hub
[ 0.393697] usbcore: registered new device driver usb
[ 0.393697] pps_core: LinuxPPS API ver. 1 registered
[ 0.393697] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.393697] PTP clock support registered
[ 0.393697] EDAC MC: Ver: 3.0.0
[ 0.393697] Registered efivars operations
[ 0.393697] PCI: Using ACPI for IRQ routing
[ 0.439058] PCI: pci_cache_line_size set to 64 bytes
[ 0.439126] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.439127] e820: reserve RAM buffer [mem 0x816c0018-0x83ffffff]
[ 0.439127] e820: reserve RAM buffer [mem 0x816d1018-0x83ffffff]
[ 0.439128] e820: reserve RAM buffer [mem 0x874dc000-0x87ffffff]
[ 0.439128] e820: reserve RAM buffer [mem 0x8a5ae000-0x8bffffff]
[ 0.439129] e820: reserve RAM buffer [mem 0x8ce55000-0x8fffffff]
[ 0.439129] e820: reserve RAM buffer [mem 0x8f410000-0x8fffffff]
[ 0.439130] e820: reserve RAM buffer [mem 0x86e000000-0x86fffffff]
[ 0.439186] NetLabel: Initializing
[ 0.439186] NetLabel: domain hash size = 128
[ 0.439186] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.439195] NetLabel: unlabeled traffic allowed by default
[ 0.439197] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.439197] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.440566] clocksource: Switched to clocksource tsc-early
[ 0.446961] *** VALIDATE bpf ***
[ 0.446999] VFS: Disk quotas dquot_6.6.0
[ 0.447008] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.447020] *** VALIDATE ramfs ***
[ 0.447022] *** VALIDATE hugetlbfs ***
[ 0.447044] pnp: PnP ACPI init
[ 0.447242] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.447245] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.447684] pnp 00:01: [dma 0 disabled]
[ 0.447710] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.447803] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.447805] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.447817] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.447899] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.447901] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.448064] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.448065] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.448066] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.448066] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.448067] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.448068] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.448069] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.448069] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.448071] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.448274] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 0.448275] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.448276] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.448277] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.448277] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.448278] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.448279] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.448281] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.448554] system 00:07: [io 0x2000-0x20fe] has been reserved
[ 0.448556] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.449530] system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved
[ 0.449530] system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[ 0.449530] system 00:08: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[ 0.449530] system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved
[ 0.449530] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.449530] pnp: PnP ACPI: found 9 devices
[ 0.450113] thermal_sys: Registered thermal governor 'fair_share'
[ 0.450114] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.450114] thermal_sys: Registered thermal governor 'step_wise'
[ 0.450115] thermal_sys: Registered thermal governor 'user_space'
[ 0.450115] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.454638] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.454657] pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.454659] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.454660] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.454661] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.454662] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 0.454663] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[ 0.454666] pci 0000:00:1b.0: BAR 14: assigned [mem 0xa2100000-0xa22fffff]
[ 0.454669] pci 0000:00:1b.0: BAR 15: assigned [mem 0xa2300000-0xa24fffff 64bit pref]
[ 0.454670] pci 0000:00:1d.0: BAR 14: assigned [mem 0xa2500000-0xa26fffff]
[ 0.454672] pci 0000:00:1d.0: BAR 15: assigned [mem 0xa2700000-0xa28fffff 64bit pref]
[ 0.454674] pci 0000:00:1b.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.454675] pci 0000:00:1d.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.454677] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.454678] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.454679] pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff]
[ 0.454681] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa20fffff 64bit pref]
[ 0.454683] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ 0.454689] pci 0000:00:1b.0: bridge window [io 0x5000-0x5fff]
[ 0.454692] pci 0000:00:1b.0: bridge window [mem 0xa2100000-0xa22fffff]
[ 0.454694] pci 0000:00:1b.0: bridge window [mem 0xa2300000-0xa24fffff 64bit pref]
[ 0.454697] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.454706] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.454709] pci 0000:00:1c.7: bridge window [mem 0xa4200000-0xa44fffff]
[ 0.454713] pci 0000:00:1d.0: PCI bridge to [bus 05]
[ 0.454716] pci 0000:00:1d.0: bridge window [io 0x6000-0x6fff]
[ 0.454719] pci 0000:00:1d.0: bridge window [mem 0xa2500000-0xa26fffff]
[ 0.454721] pci 0000:00:1d.0: bridge window [mem 0xa2700000-0xa28fffff 64bit pref]
[ 0.454725] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.454726] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.454726] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.454727] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[ 0.454727] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[ 0.454728] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.454729] pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff]
[ 0.454729] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa20fffff 64bit pref]
[ 0.454730] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.454731] pci_bus 0000:02: resource 1 [mem 0xa2100000-0xa22fffff]
[ 0.454731] pci_bus 0000:02: resource 2 [mem 0xa2300000-0xa24fffff 64bit pref]
[ 0.454732] pci_bus 0000:04: resource 1 [mem 0xa4200000-0xa44fffff]
[ 0.454732] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
[ 0.454733] pci_bus 0000:05: resource 1 [mem 0xa2500000-0xa26fffff]
[ 0.454734] pci_bus 0000:05: resource 2 [mem 0xa2700000-0xa28fffff 64bit pref]
[ 0.454865] NET: Registered protocol family 2
[ 0.454970] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.455087] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.455287] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.455335] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.455381] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.455440] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.455498] NET: Registered protocol family 1
[ 0.455501] NET: Registered protocol family 44
[ 0.455738] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.455746] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.455754] pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
[ 0.455958] pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
[ 0.455966] PCI: CLS 64 bytes, default 64
[ 0.456014] Trying to unpack rootfs image as initramfs...
[ 0.556100] Freeing initrd memory: 10128K
[ 0.556106] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.556107] software IO TLB: mapped [mem 0x7d6c0000-0x816c0000] (64MB)
[ 0.556207] check: Scanning for low memory corruption every 60 seconds
[ 0.556428] Initialise system trusted keyrings
[ 0.556433] Key type blacklist registered
[ 0.556456] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 0.557147] zbud: loaded
[ 0.559575] Key type asymmetric registered
[ 0.559576] Asymmetric key parser 'x509' registered
[ 0.559580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.559602] io scheduler mq-deadline registered
[ 0.559602] io scheduler kyber registered
[ 0.559615] io scheduler bfq registered
[ 0.560068] pcieport 0000:00:1c.7: AER: enabled with IRQ 123
[ 0.560105] pcieport 0000:00:1c.7: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 0.560216] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.560263] efifb: probing for efifb
[ 0.560273] efifb: framebuffer at 0x90000000, using 23040k, total 23040k
[ 0.560273] efifb: mode is 2560x1440x32, linelength=16384, pages=1
[ 0.560273] efifb: scrolling: redraw
[ 0.560274] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.560294] fbcon: Deferring console take-over
[ 0.560295] fb0: EFI VGA frame buffer device
[ 0.560299] intel_idle: MWAIT substates: 0x11142120
[ 0.560300] intel_idle: v0.4.1 model 0x9E
[ 0.560635] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.560704] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.560717] ACPI: Sleep Button [SLPB]
[ 0.560735] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.560743] ACPI: Power Button [PWRB]
[ 0.560762] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.560817] ACPI: Power Button [PWRF]
[ 0.562358] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.562359] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.562569] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.583814] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.584475] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.584476] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.585124] usbcore: registered new interface driver usbserial_generic
[ 0.585126] usbserial: USB Serial support registered for generic
[ 0.585140] rtc_cmos 00:03: RTC can wake from S4
[ 0.585739] rtc_cmos 00:03: registered as rtc0
[ 0.585745] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.585775] intel_pstate: Intel P-state driver initializing
[ 0.586715] intel_pstate: HWP enabled
[ 0.586808] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.586857] intel_pmc_core INT33A1:00: initialized
[ 0.586890] drop_monitor: Initializing network drop monitor service
[ 0.587012] NET: Registered protocol family 10
[ 0.589835] Segment Routing with IPv6
[ 0.589845] NET: Registered protocol family 17
[ 0.590415] RAS: Correctable Errors collector initialized.
[ 0.590457] microcode: sig=0x906ec, pf=0x2, revision=0xa0
[ 0.590672] microcode: Microcode Update Driver: v2.2.
[ 0.590673] IPI shorthand broadcast: enabled
[ 0.590676] sched_clock: Marking stable (600256521, -9586417)->(610975842, -20305738)
[ 0.590874] registered taskstats version 1
[ 0.590877] Loading compiled-in X.509 certificates
[ 0.592324] Loaded X.509 cert 'Build time autogenerated kernel key: 7bc55262ef94a8ea9201c74adcaa6ba50aad6475'
[ 0.592339] zswap: loaded using pool lzo/zbud
[ 0.592533] Key type ._fscrypt registered
[ 0.592533] Key type .fscrypt registered
[ 0.595058] Key type big_key registered
[ 0.596565] PM: Magic number: 8:44:604
[ 0.596795] rtc_cmos 00:03: setting system clock to 2020-10-22T22:33:07 UTC (1603405987)
[ 0.597538] Freeing unused decrypted memory: 2040K
[ 0.597760] Freeing unused kernel image memory: 1708K
[ 0.709673] Write protecting the kernel read-only data: 18432k
[ 0.711050] Freeing unused kernel image memory: 2012K
[ 0.711216] Freeing unused kernel image memory: 92K
[ 0.720022] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.720023] Run /init as init process
[ 0.788946] fbcon: Taking over console
[ 0.788979] Console: switching to colour frame buffer device 320x90
[ 0.830325] SCSI subsystem initialized
[ 0.831874] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.831877] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.832931] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[ 0.832934] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.833060] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.833061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.833061] usb usb1: Product: xHCI Host Controller
[ 0.833062] usb usb1: Manufacturer: Linux 5.4.72-1-lts xhci-hcd
[ 0.833062] usb usb1: SerialNumber: 0000:00:14.0
[ 0.833155] hub 1-0:1.0: USB hub found
[ 0.833171] hub 1-0:1.0: 16 ports detected
[ 0.833583] libata version 3.00 loaded.
[ 0.834519] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.834520] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.834521] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.834552] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.834553] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.834553] usb usb2: Product: xHCI Host Controller
[ 0.834554] usb usb2: Manufacturer: Linux 5.4.72-1-lts xhci-hcd
[ 0.834554] usb usb2: SerialNumber: 0000:00:14.0
[ 0.834607] hub 2-0:1.0: USB hub found
[ 0.834648] hub 2-0:1.0: 10 ports detected
[ 0.835040] usb: port power management may be unreliable
[ 0.835106] ahci 0000:00:17.0: version 3.0
[ 0.835919] xhci_hcd 0000:01:00.2: xHCI Host Controller
[ 0.835921] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 3
[ 0.836498] xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[ 0.836590] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.836591] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.836592] usb usb3: Product: xHCI Host Controller
[ 0.836592] usb usb3: Manufacturer: Linux 5.4.72-1-lts xhci-hcd
[ 0.836592] usb usb3: SerialNumber: 0000:01:00.2
[ 0.836638] hub 3-0:1.0: USB hub found
[ 0.836686] hub 3-0:1.0: 2 ports detected
[ 0.836818] xhci_hcd 0000:01:00.2: xHCI Host Controller
[ 0.836819] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
[ 0.836820] xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.836897] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.836915] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.836916] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.836916] usb usb4: Product: xHCI Host Controller
[ 0.836917] usb usb4: Manufacturer: Linux 5.4.72-1-lts xhci-hcd
[ 0.836917] usb usb4: SerialNumber: 0000:01:00.2
[ 0.837000] hub 4-0:1.0: USB hub found
[ 0.837010] hub 4-0:1.0: 4 ports detected
[ 0.849598] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.849604] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 1.001609] scsi host0: ahci
[ 1.002180] scsi host1: ahci
[ 1.002680] scsi host2: ahci
[ 1.003155] scsi host3: ahci
[ 1.003671] scsi host4: ahci
[ 1.004184] scsi host5: ahci
[ 1.004332] ata1: SATA max UDMA/133 abar m2048@0xa4539000 port 0xa4539100 irq 126
[ 1.004336] ata2: SATA max UDMA/133 abar m2048@0xa4539000 port 0xa4539180 irq 126
[ 1.004339] ata3: SATA max UDMA/133 abar m2048@0xa4539000 port 0xa4539200 irq 126
[ 1.004342] ata4: SATA max UDMA/133 abar m2048@0xa4539000 port 0xa4539280 irq 126
[ 1.004344] ata5: SATA max UDMA/133 abar m2048@0xa4539000 port 0xa4539300 irq 126
[ 1.004347] ata6: SATA max UDMA/133 abar m2048@0xa4539000 port 0xa4539380 irq 126
[ 1.199639] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.330832] ata1: SATA link down (SStatus 4 SControl 300)
[ 1.341064] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.341107] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.341156] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.341204] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.341232] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.347131] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.347136] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.347140] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.347245] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.347251] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.347255] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.347271] ata4.00: supports DRM functions and may not be fully accessible
[ 1.347434] ata4.00: ATA-10: CT500MX500SSD1, M3CR023, max UDMA/133
[ 1.347435] ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.347611] ata6.00: supports DRM functions and may not be fully accessible
[ 1.348283] ata6.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT03B6Q, max UDMA/133
[ 1.348284] ata6.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.348693] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.348694] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.348694] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.348822] ata4.00: supports DRM functions and may not be fully accessible
[ 1.349714] ata4.00: configured for UDMA/133
[ 1.350745] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.350746] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.350746] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.351143] ata6.00: supports DRM functions and may not be fully accessible
[ 1.353389] ata6.00: configured for UDMA/133
[ 1.354550] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.354551] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.354552] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.379985] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
[ 1.379986] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 1.379987] usb 1-1: SerialNumber: C60008518885
[ 1.380429] hub 1-1:1.0: USB hub found
[ 1.380450] hub 1-1:1.0: 4 ports detected
[ 1.391788] ata2.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[ 1.391792] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.416583] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.416588] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.416592] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.453764] ata2.00: configured for UDMA/133
[ 1.454085] scsi 1:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[ 1.454960] scsi 3:0:0:0: Direct-Access ATA CT500MX500SSD1 023 PQ: 0 ANSI: 5
[ 1.455892] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 860 3B6Q PQ: 0 ANSI: 5
[ 1.464024] ata6.00: Enabling discard_zeroes_data
[ 1.464053] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.464078] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.464079] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.464091] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.464099] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.464099] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.464104] sd 1:0:0:0: [sda] Write Protect is off
[ 1.464105] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.464107] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.464112] sd 5:0:0:0: [sdc] Write Protect is off
[ 1.464113] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.464114] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.464123] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.529754] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.529987] ata6.00: Enabling discard_zeroes_data
[ 1.532711] sdc: sdc1 sdc2 sdc3 sdc4
[ 1.533336] sdb: sdb1 sdb2
[ 1.533798] ata6.00: Enabling discard_zeroes_data
[ 1.534683] sd 3:0:0:0: [sdb] supports TCG Opal
[ 1.534687] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.535153] sd 5:0:0:0: [sdc] supports TCG Opal
[ 1.535157] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 1.560132] usb 2-1: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
[ 1.560137] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.561108] hub 2-1:1.0: USB hub found
[ 1.561234] hub 2-1:1.0: 4 ports detected
[ 1.580667] sda: sda1 sda3
[ 1.582203] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.595954] random: fast init done
[ 1.639659] tsc: Refined TSC clocksource calibration: 3599.992 MHz
[ 1.639672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e44bc06cb, max_idle_ns: 440795255742 ns
[ 1.639752] clocksource: Switched to clocksource tsc
[ 1.709612] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[ 1.880583] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
[ 1.890839] usb 1-2: New USB device found, idVendor=08bb, idProduct=2704, bcdDevice= 1.00
[ 1.890840] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.890841] usb 1-2: Product: USB Audio DAC
[ 1.890842] usb 1-2: Manufacturer: Burr-Brown from TI
[ 2.017269] systemd[1]: systemd 246.6-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2.039688] usb 2-8: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 2.049695] systemd[1]: Detected architecture x86-64.
[ 2.072129] usb 2-8: New USB device found, idVendor=13fe, idProduct=5500, bcdDevice= 1.00
[ 2.072133] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.072136] usb 2-8: Product: Patriot Memory
[ 2.072139] usb 2-8: Manufacturer:
[ 2.072141] usb 2-8: SerialNumber: 0701843B3123A747
[ 2.121657] systemd[1]: Set hostname to <mark-arch>.
[ 2.169543] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd
[ 2.272916] systemd[1]: Queued start job for default target Graphical Interface.
[ 2.273608] systemd[1]: Created slice Virtual Machine and Container Slice.
[ 2.274073] systemd[1]: Created slice system-getty.slice.
[ 2.274344] systemd[1]: Created slice system-modprobe.slice.
[ 2.274607] systemd[1]: Created slice system-netctl.slice.
[ 2.274832] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.275058] systemd[1]: Created slice User and Session Slice.
[ 2.275134] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.275201] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.275397] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.275466] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.275512] systemd[1]: Reached target Login Prompts.
[ 2.275562] systemd[1]: Reached target Paths.
[ 2.275607] systemd[1]: Reached target Remote File Systems.
[ 2.275649] systemd[1]: Reached target Slices.
[ 2.275726] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.275826] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.276043] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.277186] systemd[1]: Listening on Process Core Dump Socket.
[ 2.277314] systemd[1]: Listening on Journal Audit Socket.
[ 2.277407] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.277501] systemd[1]: Listening on Journal Socket.
[ 2.277600] systemd[1]: Listening on udev Control Socket.
[ 2.277682] systemd[1]: Listening on udev Kernel Socket.
[ 2.278248] systemd[1]: Mounting Huge Pages File System...
[ 2.278830] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.279436] systemd[1]: Mounting Kernel Debug File System...
[ 2.280027] systemd[1]: Mounting Kernel Trace File System...
[ 2.280570] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 2.281086] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 2.281553] systemd[1]: Starting Load Kernel Module drm...
[ 2.283145] systemd[1]: Starting Set Up Additional Binary Formats...
[ 2.283656] systemd[1]: Starting File System Check on Root Device...
[ 2.284680] systemd[1]: Starting Journal Service...
[ 2.286143] systemd[1]: Starting Load Kernel Modules...
[ 2.286207] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 2.286662] systemd[1]: Starting Coldplug All udev Devices...
[ 2.287404] systemd[1]: Mounted Huge Pages File System.
[ 2.287490] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.287571] systemd[1]: Mounted Kernel Debug File System.
[ 2.287648] systemd[1]: Mounted Kernel Trace File System.
[ 2.287958] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 2.288075] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 264 (systemd-binfmt)
[ 2.288542] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 2.288648] Linux agpgart interface v0.103
[ 2.289619] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 2.290586] systemd[1]: Finished Set Up Additional Binary Formats.
[ 2.291351] random: lvm: uninitialized urandom read (4 bytes read)
[ 2.293710] systemd[1]: Finished Load Kernel Modules.
[ 2.293821] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 2.294257] systemd[1]: Mounting Kernel Configuration File System...
[ 2.294699] systemd[1]: Starting Apply Kernel Variables...
[ 2.295695] systemd[1]: Mounted Kernel Configuration File System.
[ 2.300182] systemd[1]: Finished Apply Kernel Variables.
[ 2.301881] systemd[1]: Finished File System Check on Root Device.
[ 2.302491] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.306487] EXT4-fs (sdc4): re-mounted. Opts: (null)
[ 2.307137] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.307316] systemd[1]: modprobe@drm.service: Succeeded.
[ 2.307456] systemd[1]: Finished Load Kernel Module drm.
[ 2.307566] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 2.308308] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 2.308702] systemd[1]: Starting Load/Save Random Seed...
[ 2.308750] systemd[1]: Condition check resulted in Create System Users being skipped.
[ 2.309214] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.318592] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 2.319440] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 2.320196] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=034a, bcdDevice= 1.21
[ 2.320197] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.320197] usb 1-1.4: Product: HP Elite USB Keyboard
[ 2.320198] usb 1-1.4: Manufacturer: Chicony
[ 2.322852] systemd[1]: Finished Coldplug All udev Devices.
[ 2.449597] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[ 2.468363] systemd[1]: Started Journal Service.
[ 2.468462] audit: type=1130 audit(1603405989.352:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.525286] audit: type=1130 audit(1603405989.412:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.526288] audit: type=1130 audit(1603405989.412:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.555734] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[ 2.555760] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[ 2.555809] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[ 2.571118] audit: type=1130 audit(1603405989.462:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.575554] EDAC ie31200: No ECC support
[ 2.575573] EDAC ie31200: No ECC support
[ 2.578540] nvidia-gpu 0000:01:00.3: enabling device (0000 -> 0002)
[ 2.581617] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.584278] usb-storage 2-8:1.0: USB Mass Storage device detected
[ 2.584377] scsi host6: usb-storage 2-8:1.0
[ 2.584415] usbcore: registered new interface driver usb-storage
[ 2.586041] usbcore: registered new interface driver uas
[ 2.669636] Adding 31250428k swap on /dev/sdc2. Priority:-2 extents:1 across:31250428k SSFS
[ 2.800320] audit: type=1130 audit(1603405989.692:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.813331] audit: type=1130 audit(1603405989.702:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-347722f9\x2d0a2a\x2d4a1f\x2d9b9a\x2d55e1f6707168 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.816259] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.830891] audit: type=1130 audit(1603405989.722:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.836956] audit: type=1127 audit(1603405989.722:9): pid=337 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[ 2.839641] audit: type=1130 audit(1603405989.732:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.880932] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 2.881274] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.881342] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.883208] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.883208] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.883352] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.885761] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 2.885762] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.885762] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.885762] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.885825] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.885927] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 2.885966] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 2.885969] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 2.888166] cryptd: max_cpu_qlen set to 1000
[ 2.893531] AVX2 version of gcm_enc/dec engaged.
[ 2.893532] AES CTR mode by8 optimization enabled
[ 2.901740] usb 1-3: New USB device found, idVendor=046d, idProduct=0826, bcdDevice= 0.10
[ 2.901741] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[ 2.901741] usb 1-3: Product: HD Webcam C525
[ 2.901742] usb 1-3: SerialNumber: 38649CC0
[ 2.906598] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 2.906599] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.906599] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.906600] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.906600] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 2.906601] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.906601] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 2.906602] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 2.906602] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 2.921832] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
[ 2.921852] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[ 2.921871] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[ 2.921888] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 2.921906] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 2.921923] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 2.921940] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 3.035954] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 3.049547] usb 1-6: new high-speed USB device number 6 using xhci_hcd
[ 3.061583] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 3.158064] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 3.230862] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 04:d4:c4:53:f4:5d
[ 3.230863] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 3.230916] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[ 3.231031] usb 1-6: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.52
[ 3.231032] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.231033] usb 1-6: Product: USB2.0 Hub
[ 3.231962] hub 1-6:1.0: USB hub found
[ 3.232258] hub 1-6:1.0: 4 ports detected
[ 3.379576] usb 1-7: new high-speed USB device number 7 using xhci_hcd
[ 3.449488] random: crng init done
[ 3.449490] random: 7 urandom warning(s) missed due to ratelimiting
[ 3.561339] usb 1-7: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice=10.02
[ 3.561340] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.561341] usb 1-7: Product: iPhone
[ 3.561342] usb 1-7: Manufacturer: Apple Inc.
[ 3.561342] usb 1-7: SerialNumber: 94c548f927a1efc5b2c0464266a57266391523e6
[ 3.631274] scsi 6:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 6
[ 3.632462] sd 6:0:0:0: [sdd] 247201792 512-byte logical blocks: (127 GB/118 GiB)
[ 3.633305] sd 6:0:0:0: [sdd] Write Protect is off
[ 3.633306] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 3.634147] sd 6:0:0:0: [sdd] No Caching mode page found
[ 3.634148] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 3.672016] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.675714] tun: Universal TUN/TAP device driver, 1.6
[ 3.675999] virbr0: port 1(virbr0-nic) entered blocking state
[ 3.675999] virbr0: port 1(virbr0-nic) entered disabled state
[ 3.676019] device virbr0-nic entered promiscuous mode
[ 3.684563] sdd: sdd1
[ 3.688669] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 3.691486] asus_wmi: ASUS WMI generic driver loaded
[ 3.692546] asus_wmi: Initialization: 0x0
[ 3.692568] asus_wmi: BIOS WMI version: 0.9
[ 3.692661] asus_wmi: SFUN value: 0x0
[ 3.692662] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 3.692942] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input11
[ 3.707054] iTCO_vendor_support: vendor-support=0
[ 3.708907] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.708974] iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[ 3.709031] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.709547] usb 1-10: new full-speed USB device number 8 using xhci_hcd
[ 3.770601] Bridge firewalling registered
[ 3.823092] e1000e 0000:00:1f.6 eno1: renamed from eth0
[ 3.826210] intel_rapl_common: Found RAPL domain package
[ 3.826211] intel_rapl_common: Found RAPL domain core
[ 3.826212] intel_rapl_common: Found RAPL domain dram
[ 3.905375] usb 1-10: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 3.905377] usb 1-10: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.905377] usb 1-10: Product: CSR8510 A10
[ 4.040432] Initializing XFRM netlink socket
[ 4.049545] usb 1-14: new full-speed USB device number 9 using xhci_hcd
[ 4.056272] virbr0: port 1(virbr0-nic) entered blocking state
[ 4.056273] virbr0: port 1(virbr0-nic) entered listening state
[ 4.072050] virbr0: port 1(virbr0-nic) entered disabled state
[ 4.072450] virbr1: port 1(virbr1-nic) entered blocking state
[ 4.072451] virbr1: port 1(virbr1-nic) entered disabled state
[ 4.072468] device virbr1-nic entered promiscuous mode
[ 4.086598] virbr1: port 1(virbr1-nic) entered blocking state
[ 4.086600] virbr1: port 1(virbr1-nic) entered listening state
[ 4.099868] virbr1: port 1(virbr1-nic) entered disabled state
[ 4.233108] usb 1-14: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07
[ 4.233113] usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.233117] usb 1-14: Product: USB Receiver
[ 4.233120] usb 1-14: Manufacturer: Logitech
[ 4.274530] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.278039] mc: Linux media interface: v0.10
[ 4.291783] ipheth 1-7:4.2: Apple iPhone USB Ethernet device attached
[ 4.291799] usbcore: registered new interface driver ipheth
[ 4.294716] ipheth 1-7:4.2 enp0s20f0u7c4i2: renamed from eth0
[ 4.302732] videodev: Linux video capture interface: v2.00
[ 4.305876] usbcore: registered new interface driver usbhid
[ 4.305877] usbhid: USB HID core driver
[ 4.308496] Bluetooth: Core ver 2.22
[ 4.308507] NET: Registered protocol family 31
[ 4.308507] Bluetooth: HCI device and connection manager initialized
[ 4.308509] Bluetooth: HCI socket layer initialized
[ 4.308510] Bluetooth: L2CAP socket layer initialized
[ 4.308511] Bluetooth: SCO socket layer initialized
[ 4.308578] input: Burr-Brown from TI USB Audio DAC as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:08BB:2704.0001/input/input12
[ 4.315317] usbcore: registered new interface driver btusb
[ 4.342925] usb 1-3: set resolution quirk: cval->res = 384
[ 4.343135] usbcore: registered new interface driver snd-usb-audio
[ 4.343171] uvcvideo: Found UVC 1.00 device HD Webcam C525 (046d:0826)
[ 4.369809] hid-generic 0003:08BB:2704.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio DAC ] on usb-0000:00:14.0-2/input2
[ 4.369915] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:03F0:034A.0002/input/input13
[ 4.380281] uvcvideo 1-3:1.2: Entity type for entity Extension 5 was not initialized!
[ 4.380281] uvcvideo 1-3:1.2: Entity type for entity Camera 1 was not initialized!
[ 4.380282] uvcvideo 1-3:1.2: Entity type for entity Extension 6 was not initialized!
[ 4.380283] uvcvideo 1-3:1.2: Entity type for entity Extension 7 was not initialized!
[ 4.380284] uvcvideo 1-3:1.2: Entity type for entity Extension 8 was not initialized!
[ 4.380370] input: HD Webcam C525 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/input/input14
[ 4.439786] hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.4/input0
[ 4.439873] input: Chicony HP Elite USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:03F0:034A.0003/input/input15
[ 4.439886] usbcore: registered new interface driver uvcvideo
[ 4.439886] USB Video Class driver (1.1.1)
[ 4.501111] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.501114] Bluetooth: BNEP filters: protocol multicast
[ 4.501120] Bluetooth: BNEP socket layer initialized
[ 4.510048] input: Chicony HP Elite USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:03F0:034A.0003/input/input16
[ 4.510246] hid-generic 0003:03F0:034A.0003: input,hidraw2: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.4/input1
[ 4.510638] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:046D:C52B.0004/input/input17
[ 4.515529] NET: Registered protocol family 38
[ 4.579595] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-14/input0
[ 4.579725] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:046D:C52B.0005/input/input18
[ 4.579802] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:046D:C52B.0005/input/input19
[ 4.649657] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:046D:C52B.0005/input/input20
[ 4.649849] hid-generic 0003:046D:C52B.0005: input,hiddev0,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-14/input1
[ 4.649981] hid-generic 0003:046D:C52B.0006: hiddev1,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-14/input2
[ 4.931172] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[ 4.999987] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[ 5.230009] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[ 5.230214] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
[ 5.231255] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-14/input2
[ 5.276855] kauditd_printk_skb: 146 callbacks suppressed
[ 5.276856] audit: type=1130 audit(1603405992.162:157): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.352157] audit: type=1131 audit(1603405992.242:158): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 5.382930] input: Logitech Unifying Device. Wireless PID:4069 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.2/0003:046D:C52B.0006/0003:046D:4069.0007/input/input26
[ 5.383053] input: Logitech Unifying Device. Wireless PID:4069 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.2/0003:046D:C52B.0006/0003:046D:4069.0007/input/input27
[ 5.383105] input: Logitech Unifying Device. Wireless PID:4069 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.2/0003:046D:C52B.0006/0003:046D:4069.0007/input/input28
[ 5.383175] input: Logitech Unifying Device. Wireless PID:4069 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.2/0003:046D:C52B.0006/0003:046D:4069.0007/input/input29
[ 5.383258] hid-generic 0003:046D:4069.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4069] on usb-0000:00:14.0-14/input2:1
[ 5.384833] input: Logitech Unifying Device. Wireless PID:4051 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.2/0003:046D:C52B.0006/0003:046D:4051.0008/input/input33
[ 5.384982] hid-generic 0003:046D:4051.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4051] on usb-0000:00:14.0-14/input2:2
[ 5.386637] mousedev: PS/2 mouse device common for all mice
[ 5.703475] audit: type=1130 audit(1603405992.592:159): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.703482] audit: type=1131 audit(1603405992.592:160): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.187598] audit: type=1130 audit(1603405993.072:161): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.204154] audit: type=1131 audit(1603405993.092:162): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 6.267079] input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.2/0003:046D:C52B.0006/0003:046D:4069.0007/input/input37
[ 6.267812] logitech-hidpp-device 0003:046D:4069.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-14/input2:1
[ 6.356804] input: Logitech M510 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.2/0003:046D:C52B.0006/0003:046D:4051.0008/input/input38
[ 6.357323] logitech-hidpp-device 0003:046D:4051.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech M510] on usb-0000:00:14.0-14/input2:2
[ 6.555068] audit: type=1130 audit(1603405993.442:163): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.555070] audit: type=1131 audit(1603405993.442:164): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.560478] audit: type=1130 audit(1603405993.452:165): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.759655] audit: type=1131 audit(1603405993.652:166): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 10.653192] kauditd_printk_skb: 3 callbacks suppressed
[ 10.653192] audit: type=1130 audit(1603405997.542:170): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.930801] audit: type=1100 audit(1603406000.822:171): pid=914 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="mark" exe="/usr/bin/login" hostname=mark-arch addr=? terminal=tty2 res=success'
[ 13.934268] audit: type=1101 audit(1603406000.822:172): pid=914 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_permit,pam_time acct="mark" exe="/usr/bin/login" hostname=mark-arch addr=? terminal=tty2 res=success'
[ 13.935052] audit: type=1103 audit(1603406000.822:173): pid=914 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="mark" exe="/usr/bin/login" hostname=mark-arch addr=? terminal=tty2 res=success'
[ 13.935053] audit: type=1006 audit(1603406000.822:174): pid=914 uid=0 old-auid=4294967295 auid=1000 tty=tty2 old-ses=4294967295 ses=1 res=1
[ 13.943737] audit: type=1130 audit(1603406000.832:175): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.947248] audit: type=1101 audit(1603406000.832:176): pid=916 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_permit,pam_time acct="mark" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.947249] audit: type=1103 audit(1603406000.832:177): pid=916 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="mark" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 13.947258] audit: type=1006 audit(1603406000.832:178): pid=916 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 13.947634] audit: type=1105 audit(1603406000.832:179): pid=916 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="mark" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 34.763783] kauditd_printk_skb: 3 callbacks suppressed
[ 34.763786] audit: type=1131 audit(1603406021.652:183): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 123.561114] audit: type=1131 audit(1603406110.452:184): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=libvirtd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 237.936323] audit: type=1100 audit(1603406224.822:185): pid=987 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="mark" exe="/usr/lib/polkit-1/polkit-agent-helper-1" hostname=mark-arch addr=? terminal=tty2 res=success'
[ 237.936989] audit: type=1101 audit(1603406224.822:186): pid=987 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_permit,pam_time acct="mark" exe="/usr/lib/polkit-1/polkit-agent-helper-1" hostname=? addr=? terminal=? res=success'
[ 251.164314] audit: type=1100 audit(1603406238.052:187): pid=1013 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="mark" exe="/usr/lib/polkit-1/polkit-agent-helper-1" hostname=mark-arch addr=? terminal=tty2 res=success'
[ 251.164959] audit: type=1101 audit(1603406238.052:188): pid=1013 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_permit,pam_time acct="mark" exe="/usr/lib/polkit-1/polkit-agent-helper-1" hostname=? addr=? terminal=? res=success'
[ 251.173920] audit: type=1131 audit(1603406238.062:189): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=docker comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 345.125418] logitech-hidpp-device 0003:046D:4069.0007: HID++ 4.5 device connected.
[ 407.348275] audit: type=1100 audit(1603406394.232:190): pid=1067 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="mark" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 407.348942] audit: type=1101 audit(1603406394.232:191): pid=1067 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_permit,pam_time acct="mark" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 407.349042] audit: type=1110 audit(1603406394.232:192): pid=1067 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 407.349120] audit: type=1105 audit(1603406394.232:193): pid=1067 uid=0 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 411.300366] audit: type=1106 audit(1603406398.192:194): pid=1067 uid=0 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 411.300368] audit: type=1104 audit(1603406398.192:195): pid=1067 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 606.115906] usb 2-8: USB disconnect, device number 3
[ 609.669664] usb 2-8: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[ 609.711253] usb 2-8: New USB device found, idVendor=13fe, idProduct=5500, bcdDevice= 1.00
[ 609.711258] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 609.711262] usb 2-8: Product: Patriot Memory
[ 609.711264] usb 2-8: Manufacturer:
[ 609.711267] usb 2-8: SerialNumber: 0701843B3123A747
[ 609.713427] usb-storage 2-8:1.0: USB Mass Storage device detected
[ 609.713988] scsi host6: usb-storage 2-8:1.0
[ 611.295245] scsi 6:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 6
[ 611.297316] sd 6:0:0:0: [sdd] 247201792 512-byte logical blocks: (127 GB/118 GiB)
[ 611.298749] sd 6:0:0:0: [sdd] Write Protect is off
[ 611.298753] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 611.300087] sd 6:0:0:0: [sdd] No Caching mode page found
[ 611.301852] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 611.357212] sdd: sdd1
[ 611.362082] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 699.798525] audit: type=1101 audit(1603406686.682:196): pid=1135 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_permit,pam_time acct="mark" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 699.798597] audit: type=1110 audit(1603406686.682:197): pid=1135 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 699.798643] audit: type=1105 audit(1603406686.682:198): pid=1135 uid=0 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 699.846738] exfat: module is from the staging directory, the quality is unknown, you have been warned.
[ 699.847687] exFAT: Version 1.3.0
[ 699.848376] [EXFAT] trying to mount...
[ 699.979667] [EXFAT] mounted successfully
[ 699.984554] audit: type=1106 audit(1603406686.872:199): pid=1135 uid=0 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 699.984617] audit: type=1104 audit(1603406686.872:200): pid=1135 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 763.790046] audit: type=1101 audit(1603406750.682:201): pid=1179 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_permit,pam_time acct="mark" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 763.790102] audit: type=1110 audit(1603406750.682:202): pid=1179 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 763.790147] audit: type=1105 audit(1603406750.682:203): pid=1179 uid=0 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 764.365953] audit: type=1106 audit(1603406751.252:204): pid=1179 uid=0 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'
[ 764.366098] audit: type=1104 audit(1603406751.252:205): pid=1179 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=mark-arch addr=? terminal=/dev/tty2 res=success'It was working last night, I turned it on this morning and lightdm broke and wont run (thats a problem for later) and then when I was trying to find a solution i realized that my internet had disappeared.
Last edited by AmazingMarks (2020-10-22 22:51:52)
Why doesn't this site support markdown?
Offline
#4 2020-10-22 22:56:57
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,859
Re: My wireless interface has disappeared
dmesg includes no messages from the bcma module, has that module worked with the device in the past?
What is the VID:PID of the wireless NIC from lspci -nn?
Was starting the system today the first boot since a pacman update?
Last edited by loqs (2020-10-22 22:57:17)
Offline
#5 2020-10-22 23:07:42
- AmazingMarks
- Member
- Registered: 2019-08-30
- Posts: 13
Re: My wireless interface has disappeared
loqs wrote:
dmesg includes no messages from the bcma module, has that module worked with the device in the past?
What is the VID:PID of the wireless NIC from lspci -nn?
Was starting the system today the first boot since a pacman update?
If memory serves me correctly I used broadcom-wl when setting up the system. Its still installed.
14e4:43a0
No.
Why doesn't this site support markdown?
Offline
#6 2020-10-22 23:12:22
- Scimmia
- Fellow
- Registered: 2012-09-01
- Posts: 13,694
Re: My wireless interface has disappeared
The broadcom-wl package is only built for the 'linux' kernel package. You need to be using dkms to run other kernels.
Offline
#7 2020-10-22 23:14:27
- AmazingMarks
- Member
- Registered: 2019-08-30
- Posts: 13
Re: My wireless interface has disappeared
Scimmia wrote:
The broadcom-wl package is only built for the 'linux' kernel package. You need to be using dkms to run other kernels.
How would you suggest i install dkms, why did it only break now?
Why doesn't this site support markdown?
Offline
#8 2020-10-23 01:50:46
- Scimmia
- Fellow
- Registered: 2012-09-01
- Posts: 13,694
Re: My wireless interface has disappeared
Offline
Pages: 1