You are not logged in.

#1 2020-10-24 23:24:41

uugh-_-
Member
Registered: 2020-10-24
Posts: 7

[SOLVED] opengl renderer is llvmpipe instead of my actual gpu

Hi! A while back i noticed native linux games were running incredibly slow. Portal was unplayable and minecraft hit around 10-30fps, however when i ran the windows version of portal or any other windows game for that matter through proton it ran pretty much flawlessly. I spent a good while trying to figure out what it was and now i believe it is caused by my opengl device showing up as "llvmpipe" when i ran glxinfo -B.

I have spent a few hours now trying to fix it and have seen multiple posts on here explaining the same problem, but i never got it to work even after trying what those posts mentioned. I have tried:

  • deleting xorg.conf and running without, but x didnt start without it

  • using xorg.conf generated by nvidia-xconfig

  • using xorg.conf generated by Xorg :0 -configure

  • reinstallig nvidia packages

  • downgrading the kernel (linux-zen) to 5.8.14 after seeing a post about nvidia drivers not supporting it

I also realized that i forgot to edit the pacman hook for nvidia drivers you're supposed to make that updates the initramfs to work with the zen kernel however i manually ran mkinitcpio -P but after a reboot it still didn't change anything.

glxinfo -B output:

name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: Mesa/X.org (0xffffffff)
    Device: llvmpipe (LLVM 10.0.1, 256 bits) (0xffffffff)
    Version: 20.2.1
    Accelerated: no
    Video memory: 16000MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 4.5
    Max compat profile version: 3.1
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
OpenGL vendor string: Mesa/X.org
OpenGL renderer string: llvmpipe (LLVM 10.0.1, 256 bits)
OpenGL core profile version string: 4.5 (Core Profile) Mesa 20.2.1
OpenGL core profile shading language version string: 4.50
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 3.1 Mesa 20.2.1
OpenGL shading language version string: 1.40
OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 20.2.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

xorg.conf:

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/misc"
        FontPath     "/usr/share/fonts/TTF"
        FontPath     "/usr/share/fonts/OTF"
        FontPath     "/usr/share/fonts/Type1"
        FontPath     "/usr/share/fonts/100dpi"
        FontPath     "/usr/share/fonts/75dpi"
EndSection

Section "Module"
        Load  "glx"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Device"
        Identifier  "Card0"
        Driver      "nvidia"
        BusID       "PCI:9:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0

Xorg.0.log:

[    88.714] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    88.715] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[    88.715] Build Operating System: Linux Arch Linux
[    88.715] Current Operating System: Linux arch 5.8.14-zen1-1-zen #1 ZEN SMP PREEMPT Thu, 08 Oct 2020 00:01:25 +0000 x86_64
[    88.715] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=62ffd866-32dd-4d3a-bd8f-2e39f8abb915 rw loglevel=3 quiet
[    88.715] Build Date: 02 September 2020  06:17:44AM
[    88.715]  
[    88.715] Current version of pixman: 0.40.0
[    88.715] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    88.715] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    88.715] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 25 00:24:00 2020
[    88.716] (==) Using config file: "/etc/X11/xorg.conf"
[    88.716] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    88.716] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    88.717] (==) ServerLayout "X.org Configured"
[    88.717] (**) |-->Screen "Screen0" (0)
[    88.717] (**) |   |-->Monitor "Monitor0"
[    88.717] (**) |   |-->Device "Card0"
[    88.717] (**) |-->Input Device "Mouse0"
[    88.717] (**) |-->Input Device "Keyboard0"
[    88.717] (==) Automatically adding devices
[    88.717] (==) Automatically enabling devices
[    88.717] (==) Automatically adding GPU devices
[    88.717] (==) Automatically binding GPU devices
[    88.717] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    88.719] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    88.719] 	Entry deleted from font path.
[    88.721] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    88.721] 	Entry deleted from font path.
[    88.721] (**) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    88.721] (**) ModulePath set to "/usr/lib/xorg/modules"
[    88.721] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    88.721] (WW) Disabling Mouse0
[    88.721] (WW) Disabling Keyboard0
[    88.721] (II) Module ABI versions:
[    88.721] 	X.Org ANSI C Emulation: 0.4
[    88.721] 	X.Org Video Driver: 24.1
[    88.721] 	X.Org XInput driver : 24.1
[    88.721] 	X.Org Server Extension : 10.0
[    88.721] (++) using VT number 1

[    88.723] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    88.725] (--) PCI:*(9@0:0:0) 10de:1b81:1462:3302 rev 161, Mem @ 0xfc000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    88.725] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    88.725] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    88.725] (II) LoadModule: "glx"
[    88.726] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    88.727] (II) Module glx: vendor="X.Org Foundation"
[    88.727] 	compiled for 1.20.9, module version = 1.0.0
[    88.727] 	ABI class: X.Org Server Extension, version 10.0
[    88.727] (II) LoadModule: "nvidia"
[    88.728] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    88.732] (II) Module nvidia: vendor="NVIDIA Corporation"
[    88.732] 	compiled for 1.6.99.901, module version = 1.0.0
[    88.732] 	Module class: X.Org Video Driver
[    88.733] (II) NVIDIA dlloader X Driver  455.28  Wed Sep 30 01:04:06 UTC 2020
[    88.733] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    88.734] (II) Loading sub module "fb"
[    88.734] (II) LoadModule: "fb"
[    88.734] (II) Loading /usr/lib/xorg/modules/libfb.so
[    88.734] (II) Module fb: vendor="X.Org Foundation"
[    88.734] 	compiled for 1.20.9, module version = 1.0.0
[    88.734] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    88.734] (II) Loading sub module "wfb"
[    88.734] (II) LoadModule: "wfb"
[    88.734] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    88.735] (II) Module wfb: vendor="X.Org Foundation"
[    88.735] 	compiled for 1.20.9, module version = 1.0.0
[    88.735] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    88.735] (II) Loading sub module "ramdac"
[    88.735] (II) LoadModule: "ramdac"
[    88.735] (II) Module "ramdac" already built-in
[    89.657] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    89.657] (==) NVIDIA(0): RGB weight 888
[    89.657] (==) NVIDIA(0): Default visual is TrueColor
[    89.657] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    89.660] (**) NVIDIA(0): Enabling 2D acceleration
[    89.660] (II) Loading sub module "glxserver_nvidia"
[    89.660] (II) LoadModule: "glxserver_nvidia"
[    89.660] (WW) Warning, couldn't open module glxserver_nvidia
[    89.660] (EE) NVIDIA: Failed to load module "glxserver_nvidia" (module does not exist, 0)
[    89.660] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[    89.660] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[    89.660] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[    89.660] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[    89.660] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.
[    89.660] (II) NVIDIA: The X server does not support PRIME Render Offload.
[    90.564] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:9:0:0
[    90.564] (--) NVIDIA(0):     DFP-0
[    90.564] (--) NVIDIA(0):     DFP-1
[    90.564] (--) NVIDIA(0):     DFP-2
[    90.564] (--) NVIDIA(0):     DFP-3
[    90.564] (--) NVIDIA(0):     DFP-4
[    90.564] (--) NVIDIA(0):     DFP-5
[    90.564] (--) NVIDIA(0):     DFP-6 (boot)
[    90.564] (--) NVIDIA(0):     DFP-7
[    90.564] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1070 (GP104-A) at PCI:9:0:0 (GPU-0)
[    90.564] (--) NVIDIA(0): Memory: 8388608 kBytes
[    90.564] (--) NVIDIA(0): VideoBIOS: 86.04.50.00.2a
[    90.564] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    90.565] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    90.565] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    90.565] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    90.565] (--) NVIDIA(GPU-0): 
[    90.565] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    90.565] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    90.565] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    90.565] (--) NVIDIA(GPU-0): 
[    90.565] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    90.565] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    90.565] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[    90.565] (--) NVIDIA(GPU-0): 
[    90.565] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    90.565] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    90.565] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    90.565] (--) NVIDIA(GPU-0): 
[    90.565] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    90.565] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[    90.565] (--) NVIDIA(GPU-0): DFP-4: 1440.0 MHz maximum pixel clock
[    90.565] (--) NVIDIA(GPU-0): 
[    90.565] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    90.565] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[    90.565] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[    90.565] (--) NVIDIA(GPU-0): 
[    90.708] (--) NVIDIA(GPU-0): Ancor Communications Inc ROG PG279Q (DFP-6): connected
[    90.708] (--) NVIDIA(GPU-0): Ancor Communications Inc ROG PG279Q (DFP-6): Internal DisplayPort
[    90.708] (--) NVIDIA(GPU-0): Ancor Communications Inc ROG PG279Q (DFP-6): 1440.0 MHz maximum pixel clock
[    90.708] (--) NVIDIA(GPU-0): 
[    90.710] (--) NVIDIA(GPU-0): DFP-7: disconnected
[    90.710] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[    90.710] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[    90.710] (--) NVIDIA(GPU-0): 
[    90.713] (==) NVIDIA(0): 
[    90.713] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    90.713] (==) NVIDIA(0):     will be used as the requested mode.
[    90.713] (==) NVIDIA(0): 
[    90.713] (II) NVIDIA(0): Validated MetaModes:
[    90.713] (II) NVIDIA(0):     "DFP-6:nvidia-auto-select"
[    90.713] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[    90.717] (--) NVIDIA(0): DPI set to (108, 107); computed from "UseEdidDpi" X config
[    90.717] (--) NVIDIA(0):     option
[    90.718] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[    90.718] (II) NVIDIA:     access.
[    90.720] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    90.720] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    90.720] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    90.720] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    90.720] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    90.720] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    90.720] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    90.720] (II) NVIDIA(0):     Config Options in the README.
[    90.735] (II) NVIDIA(0): Setting mode "DFP-6:nvidia-auto-select"
[    90.823] (==) NVIDIA(0): Disabling shared memory pixmaps
[    90.823] (==) NVIDIA(0): Backing store enabled
[    90.823] (==) NVIDIA(0): Silken mouse disabled
[    90.823] (==) NVIDIA(0): DPMS enabled
[    90.823] (II) Loading sub module "dri2"
[    90.823] (II) LoadModule: "dri2"
[    90.823] (II) Module "dri2" already built-in
[    90.823] (II) NVIDIA(0): [DRI2] Setup complete
[    90.823] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    90.824] (II) Initializing extension Generic Event Extension
[    90.824] (II) Initializing extension SHAPE
[    90.824] (II) Initializing extension MIT-SHM
[    90.824] (II) Initializing extension XInputExtension
[    90.824] (II) Initializing extension XTEST
[    90.824] (II) Initializing extension BIG-REQUESTS
[    90.824] (II) Initializing extension SYNC
[    90.824] (II) Initializing extension XKEYBOARD
[    90.824] (II) Initializing extension XC-MISC
[    90.824] (II) Initializing extension SECURITY
[    90.824] (II) Initializing extension XFIXES
[    90.824] (II) Initializing extension RENDER
[    90.824] (II) Initializing extension RANDR
[    90.824] (II) Initializing extension COMPOSITE
[    90.824] (II) Initializing extension DAMAGE
[    90.824] (II) Initializing extension MIT-SCREEN-SAVER
[    90.824] (II) Initializing extension DOUBLE-BUFFER
[    90.824] (II) Initializing extension RECORD
[    90.824] (II) Initializing extension DPMS
[    90.824] (II) Initializing extension Present
[    90.824] (II) Initializing extension DRI3
[    90.824] (II) Initializing extension X-Resource
[    90.824] (II) Initializing extension XVideo
[    90.824] (II) Initializing extension XVideo-MotionCompensation
[    90.824] (II) Initializing extension GLX
[    90.824] (II) AIGLX: Screen 0 is not DRI2 capable
[    90.996] (II) IGLX: Loaded and initialized swrast
[    90.996] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    90.996] (II) Initializing extension XFree86-VidModeExtension
[    90.996] (II) Initializing extension XFree86-DGA
[    90.996] (II) Initializing extension XFree86-DRI
[    90.996] (II) Initializing extension DRI2
[    90.996] (II) Initializing extension NV-GLX
[    90.996] (II) Initializing extension NV-CONTROL
[    90.996] (II) Initializing extension XINERAMA
[    91.074] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    91.074] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    91.074] (II) LoadModule: "libinput"
[    91.074] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    91.077] (II) Module libinput: vendor="X.Org Foundation"
[    91.077] 	compiled for 1.20.8, module version = 0.30.0
[    91.077] 	Module class: X.Org XInput Driver
[    91.077] 	ABI class: X.Org XInput driver, version 24.1
[    91.077] (II) Using input driver 'libinput' for 'Power Button'
[    91.079] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 27 paused 0
[    91.079] (**) Power Button: always reports core events
[    91.079] (**) Option "Device" "/dev/input/event1"
[    91.079] (**) Option "_source" "server/udev"
[    91.083] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    91.084] (II) event1  - Power Button: device is a keyboard
[    91.084] (II) event1  - Power Button: device removed
[    91.084] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    91.084] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    91.084] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    91.084] (II) event1  - Power Button: device is a keyboard
[    91.085] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    91.085] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    91.085] (II) Using input driver 'libinput' for 'Power Button'
[    91.086] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 30 paused 0
[    91.086] (**) Power Button: always reports core events
[    91.086] (**) Option "Device" "/dev/input/event0"
[    91.086] (**) Option "_source" "server/udev"
[    91.086] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    91.086] (II) event0  - Power Button: device is a keyboard
[    91.086] (II) event0  - Power Button: device removed
[    91.086] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    91.086] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    91.087] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    91.087] (II) event0  - Power Button: device is a keyboard
[    91.088] (II) config/udev: Adding input device SteelSeries  SteelSeries Arctis 7 Consumer Control (/dev/input/event23)
[    91.088] (**) SteelSeries  SteelSeries Arctis 7 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    91.088] (II) Using input driver 'libinput' for 'SteelSeries  SteelSeries Arctis 7 Consumer Control'
[    91.088] (II) systemd-logind: got fd for /dev/input/event23 13:87 fd 31 paused 0
[    91.088] (**) SteelSeries  SteelSeries Arctis 7 Consumer Control: always reports core events
[    91.088] (**) Option "Device" "/dev/input/event23"
[    91.088] (**) Option "_source" "server/udev"
[    91.090] (II) event23 - SteelSeries  SteelSeries Arctis 7 Consumer Control: is tagged by udev as: Keyboard
[    91.090] (II) event23 - SteelSeries  SteelSeries Arctis 7 Consumer Control: device is a keyboard
[    91.090] (II) event23 - SteelSeries  SteelSeries Arctis 7 Consumer Control: device removed
[    91.090] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.5/0003:1038:12AD.0003/input/input23/event23"
[    91.090] (II) XINPUT: Adding extended input device "SteelSeries  SteelSeries Arctis 7 Consumer Control" (type: KEYBOARD, id 8)
[    91.091] (II) event23 - SteelSeries  SteelSeries Arctis 7 Consumer Control: is tagged by udev as: Keyboard
[    91.091] (II) event23 - SteelSeries  SteelSeries Arctis 7 Consumer Control: device is a keyboard
[    91.091] (II) config/udev: Adding input device SteelSeries  SteelSeries Arctis 7 (/dev/input/event24)
[    91.091] (II) No input driver specified, ignoring this device.
[    91.091] (II) This device may have been added with another device file.
[    91.092] (II) config/udev: Adding input device Corsair Corsair Gaming HARPOON RGB Mouse (/dev/input/event25)
[    91.092] (**) Corsair Corsair Gaming HARPOON RGB Mouse: Applying InputClass "libinput pointer catchall"
[    91.092] (**) Corsair Corsair Gaming HARPOON RGB Mouse: Applying InputClass "My Mouse"
[    91.092] (II) Using input driver 'libinput' for 'Corsair Corsair Gaming HARPOON RGB Mouse'
[    91.145] (II) systemd-logind: got fd for /dev/input/event25 13:89 fd 32 paused 0
[    91.145] (**) Corsair Corsair Gaming HARPOON RGB Mouse: always reports core events
[    91.145] (**) Option "Device" "/dev/input/event25"
[    91.145] (**) Option "_source" "server/udev"
[    91.146] (II) event25 - Corsair Corsair Gaming HARPOON RGB Mouse: is tagged by udev as: Mouse
[    91.146] (II) event25 - Corsair Corsair Gaming HARPOON RGB Mouse: device is a pointer
[    91.146] (II) event25 - Corsair Corsair Gaming HARPOON RGB Mouse: device removed
[    91.146] (**) Option "AccelSpeed" "-1"
[    91.147] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8:1.0/0003:1B1C:1B3C.0004/input/input26/event25"
[    91.147] (II) XINPUT: Adding extended input device "Corsair Corsair Gaming HARPOON RGB Mouse" (type: MOUSE, id 9)
[    91.147] (**) Option "AccelerationScheme" "none"
[    91.147] (**) Corsair Corsair Gaming HARPOON RGB Mouse: (accel) selected scheme none/0
[    91.147] (**) Corsair Corsair Gaming HARPOON RGB Mouse: (accel) acceleration factor: 2.000
[    91.147] (**) Corsair Corsair Gaming HARPOON RGB Mouse: (accel) acceleration threshold: 4
[    91.148] (II) event25 - Corsair Corsair Gaming HARPOON RGB Mouse: is tagged by udev as: Mouse
[    91.148] (II) event25 - Corsair Corsair Gaming HARPOON RGB Mouse: device is a pointer
[    91.149] (II) config/udev: Adding input device Corsair Corsair Gaming HARPOON RGB Mouse (/dev/input/mouse1)
[    91.149] (**) Corsair Corsair Gaming HARPOON RGB Mouse: Applying InputClass "My Mouse"
[    91.149] (II) No input driver specified, ignoring this device.
[    91.149] (II) This device may have been added with another device file.
[    91.149] (II) config/udev: Adding input device Corsair Corsair Gaming HARPOON RGB Mouse (/dev/input/event26)
[    91.149] (**) Corsair Corsair Gaming HARPOON RGB Mouse: Applying InputClass "libinput pointer catchall"
[    91.149] (**) Corsair Corsair Gaming HARPOON RGB Mouse: Applying InputClass "My Mouse"
[    91.149] (II) Using input driver 'libinput' for 'Corsair Corsair Gaming HARPOON RGB Mouse'
[    91.150] (II) systemd-logind: got fd for /dev/input/event26 13:90 fd 33 paused 0
[    91.150] (**) Corsair Corsair Gaming HARPOON RGB Mouse: always reports core events
[    91.150] (**) Option "Device" "/dev/input/event26"
[    91.150] (**) Option "_source" "server/udev"
[    91.151] (II) event26 - Corsair Corsair Gaming HARPOON RGB Mouse: is tagged by udev as: Mouse
[    91.151] (II) event26 - Corsair Corsair Gaming HARPOON RGB Mouse: device is a pointer
[    91.151] (II) event26 - Corsair Corsair Gaming HARPOON RGB Mouse: device removed
[    91.151] (**) Option "AccelSpeed" "-1"
[    91.151] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8:1.1/0003:1B1C:1B3C.0005/input/input27/event26"
[    91.151] (II) XINPUT: Adding extended input device "Corsair Corsair Gaming HARPOON RGB Mouse" (type: MOUSE, id 10)
[    91.151] (**) Option "AccelerationScheme" "none"
[    91.151] (**) Corsair Corsair Gaming HARPOON RGB Mouse: (accel) selected scheme none/0
[    91.151] (**) Corsair Corsair Gaming HARPOON RGB Mouse: (accel) acceleration factor: 2.000
[    91.151] (**) Corsair Corsair Gaming HARPOON RGB Mouse: (accel) acceleration threshold: 4
[    91.153] (II) event26 - Corsair Corsair Gaming HARPOON RGB Mouse: is tagged by udev as: Mouse
[    91.153] (II) event26 - Corsair Corsair Gaming HARPOON RGB Mouse: device is a pointer
[    91.153] (II) config/udev: Adding input device Corsair Corsair Gaming HARPOON RGB Mouse (/dev/input/js1)
[    91.153] (**) Corsair Corsair Gaming HARPOON RGB Mouse: Applying InputClass "My Mouse"
[    91.153] (II) No input driver specified, ignoring this device.
[    91.153] (II) This device may have been added with another device file.
[    91.154] (II) config/udev: Adding input device Corsair Corsair Gaming HARPOON RGB Mouse (/dev/input/mouse2)
[    91.154] (**) Corsair Corsair Gaming HARPOON RGB Mouse: Applying InputClass "My Mouse"
[    91.154] (II) No input driver specified, ignoring this device.
[    91.154] (II) This device may have been added with another device file.
[    91.154] (II) config/udev: Adding input device Corsair Corsair Gaming HARPOON RGB Mouse Consumer Control (/dev/input/event27)
[    91.154] (**) Corsair Corsair Gaming HARPOON RGB Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[    91.154] (II) Using input driver 'libinput' for 'Corsair Corsair Gaming HARPOON RGB Mouse Consumer Control'
[    91.155] (II) systemd-logind: got fd for /dev/input/event27 13:91 fd 34 paused 0
[    91.155] (**) Corsair Corsair Gaming HARPOON RGB Mouse Consumer Control: always reports core events
[    91.155] (**) Option "Device" "/dev/input/event27"
[    91.155] (**) Option "_source" "server/udev"
[    91.156] (II) event27 - Corsair Corsair Gaming HARPOON RGB Mouse Consumer Control: is tagged by udev as: Keyboard
[    91.156] (II) event27 - Corsair Corsair Gaming HARPOON RGB Mouse Consumer Control: device is a keyboard
[    91.156] (II) event27 - Corsair Corsair Gaming HARPOON RGB Mouse Consumer Control: device removed
[    91.156] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8:1.1/0003:1B1C:1B3C.0005/input/input28/event27"
[    91.156] (II) XINPUT: Adding extended input device "Corsair Corsair Gaming HARPOON RGB Mouse Consumer Control" (type: KEYBOARD, id 11)
[    91.158] (II) event27 - Corsair Corsair Gaming HARPOON RGB Mouse Consumer Control: is tagged by udev as: Keyboard
[    91.158] (II) event27 - Corsair Corsair Gaming HARPOON RGB Mouse Consumer Control: device is a keyboard
[    91.159] (II) config/udev: Adding input device Corsair Corsair Gaming HARPOON RGB Mouse (/dev/input/event28)
[    91.159] (II) No input driver specified, ignoring this device.
[    91.159] (II) This device may have been added with another device file.
[    91.159] (II) config/udev: Adding input device Corsair Corsair Gaming HARPOON RGB Mouse (/dev/input/event29)
[    91.159] (II) No input driver specified, ignoring this device.
[    91.159] (II) This device may have been added with another device file.
[    91.159] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=12 (/dev/input/event21)
[    91.160] (II) No input driver specified, ignoring this device.
[    91.160] (II) This device may have been added with another device file.
[    91.160] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event5)
[    91.160] (II) No input driver specified, ignoring this device.
[    91.160] (II) This device may have been added with another device file.
[    91.160] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[    91.160] (II) No input driver specified, ignoring this device.
[    91.160] (II) This device may have been added with another device file.
[    91.160] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[    91.160] (II) No input driver specified, ignoring this device.
[    91.160] (II) This device may have been added with another device file.
[    91.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[    91.161] (II) No input driver specified, ignoring this device.
[    91.161] (II) This device may have been added with another device file.
[    91.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event17)
[    91.161] (II) No input driver specified, ignoring this device.
[    91.161] (II) This device may have been added with another device file.
[    91.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event20)
[    91.161] (II) No input driver specified, ignoring this device.
[    91.161] (II) This device may have been added with another device file.
[    91.162] (II) config/udev: Adding input device Corsair Corsair Gaming K95 RGB PLATINUM Keyboard (/dev/input/event3)
[    91.162] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: Applying InputClass "libinput keyboard catchall"
[    91.162] (II) Using input driver 'libinput' for 'Corsair Corsair Gaming K95 RGB PLATINUM Keyboard'
[    91.163] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 35 paused 0
[    91.163] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: always reports core events
[    91.163] (**) Option "Device" "/dev/input/event3"
[    91.163] (**) Option "_source" "server/udev"
[    91.164] (II) event3  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: is tagged by udev as: Keyboard
[    91.164] (II) event3  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: device is a keyboard
[    91.164] (II) event3  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: device removed
[    91.164] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-1/5-1:1.0/0003:1B1C:1B2D.0001/input/input3/event3"
[    91.164] (II) XINPUT: Adding extended input device "Corsair Corsair Gaming K95 RGB PLATINUM Keyboard" (type: KEYBOARD, id 12)
[    91.165] (II) event3  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: is tagged by udev as: Keyboard
[    91.165] (II) event3  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: device is a keyboard
[    91.166] (II) config/udev: Adding input device Corsair Corsair Gaming K95 RGB PLATINUM Keyboard (/dev/input/event4)
[    91.166] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: Applying InputClass "libinput keyboard catchall"
[    91.166] (II) Using input driver 'libinput' for 'Corsair Corsair Gaming K95 RGB PLATINUM Keyboard'
[    91.167] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 36 paused 0
[    91.167] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: always reports core events
[    91.167] (**) Option "Device" "/dev/input/event4"
[    91.167] (**) Option "_source" "server/udev"
[    91.169] (II) event4  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: is tagged by udev as: Keyboard
[    91.169] (II) event4  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: device is a keyboard
[    91.169] (II) event4  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: device removed
[    91.169] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-1/5-1:1.1/0003:1B1C:1B2D.0002/input/input11/event4"
[    91.169] (II) XINPUT: Adding extended input device "Corsair Corsair Gaming K95 RGB PLATINUM Keyboard" (type: KEYBOARD, id 13)
[    91.171] (II) event4  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: is tagged by udev as: Keyboard
[    91.171] (II) event4  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard: device is a keyboard
[    91.171] (II) config/udev: Adding input device Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control (/dev/input/event6)
[    91.171] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    91.171] (II) Using input driver 'libinput' for 'Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control'
[    91.172] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 37 paused 0
[    91.172] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: always reports core events
[    91.172] (**) Option "Device" "/dev/input/event6"
[    91.172] (**) Option "_source" "server/udev"
[    91.174] (II) event6  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: is tagged by udev as: Keyboard
[    91.174] (II) event6  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: device is a keyboard
[    91.174] (II) event6  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: device removed
[    91.174] (II) libinput: Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: needs a virtual subdevice
[    91.174] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-1/5-1:1.1/0003:1B1C:1B2D.0002/input/input12/event6"
[    91.174] (II) XINPUT: Adding extended input device "Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control" (type: MOUSE, id 14)
[    91.174] (**) Option "AccelerationScheme" "none"
[    91.174] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: (accel) selected scheme none/0
[    91.174] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: (accel) acceleration factor: 2.000
[    91.174] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: (accel) acceleration threshold: 4
[    91.175] (II) event6  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: is tagged by udev as: Keyboard
[    91.175] (II) event6  - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: device is a keyboard
[    91.176] (II) config/udev: Adding input device Corsair Corsair Gaming K95 RGB PLATINUM Keyboard (/dev/input/event10)
[    91.176] (II) No input driver specified, ignoring this device.
[    91.176] (II) This device may have been added with another device file.
[    91.176] (II) config/udev: Adding input device Corsair Corsair Gaming K95 RGB PLATINUM Keyboard (/dev/input/event13)
[    91.176] (II) No input driver specified, ignoring this device.
[    91.176] (II) This device may have been added with another device file.
[    91.176] (II) config/udev: Adding input device Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse (/dev/input/event16)
[    91.176] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: Applying InputClass "libinput pointer catchall"
[    91.176] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: Applying InputClass "My Mouse"
[    91.176] (II) Using input driver 'libinput' for 'Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse'
[    91.177] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 38 paused 0
[    91.178] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: always reports core events
[    91.178] (**) Option "Device" "/dev/input/event16"
[    91.178] (**) Option "_source" "server/udev"
[    91.179] (II) event16 - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: is tagged by udev as: Mouse
[    91.179] (II) event16 - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: device is a pointer
[    91.179] (II) event16 - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: device removed
[    91.179] (**) Option "AccelSpeed" "-1"
[    91.179] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-1/5-1:1.1/0003:1B1C:1B2D.0002/input/input15/event16"
[    91.179] (II) XINPUT: Adding extended input device "Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse" (type: MOUSE, id 15)
[    91.179] (**) Option "AccelerationScheme" "none"
[    91.179] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: (accel) selected scheme none/0
[    91.179] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: (accel) acceleration factor: 2.000
[    91.179] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: (accel) acceleration threshold: 4
[    91.180] (II) event16 - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: is tagged by udev as: Mouse
[    91.180] (II) event16 - Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: device is a pointer
[    91.181] (II) config/udev: Adding input device Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse (/dev/input/js0)
[    91.181] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: Applying InputClass "My Mouse"
[    91.181] (II) No input driver specified, ignoring this device.
[    91.181] (II) This device may have been added with another device file.
[    91.181] (II) config/udev: Adding input device Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse (/dev/input/mouse0)
[    91.181] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse: Applying InputClass "My Mouse"
[    91.181] (II) No input driver specified, ignoring this device.
[    91.181] (II) This device may have been added with another device file.
[    91.181] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event7)
[    91.181] (II) No input driver specified, ignoring this device.
[    91.181] (II) This device may have been added with another device file.
[    91.182] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event8)
[    91.182] (II) No input driver specified, ignoring this device.
[    91.182] (II) This device may have been added with another device file.
[    91.182] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event12)
[    91.182] (II) No input driver specified, ignoring this device.
[    91.182] (II) This device may have been added with another device file.
[    91.182] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event14)
[    91.182] (II) No input driver specified, ignoring this device.
[    91.182] (II) This device may have been added with another device file.
[    91.182] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event18)
[    91.182] (II) No input driver specified, ignoring this device.
[    91.182] (II) This device may have been added with another device file.
[    91.183] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event19)
[    91.183] (II) No input driver specified, ignoring this device.
[    91.183] (II) This device may have been added with another device file.
[    91.183] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event22)
[    91.183] (II) No input driver specified, ignoring this device.
[    91.183] (II) This device may have been added with another device file.
[    91.183] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    91.183] (II) No input driver specified, ignoring this device.
[    91.183] (II) This device may have been added with another device file.
[    91.186] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    91.186] (II) Using input driver 'libinput' for 'Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control'
[    91.186] (II) systemd-logind: returning pre-existing fd for /dev/input/event6 13:70
[    91.186] (**) Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: always reports core events
[    91.186] (**) Option "Device" "/dev/input/event6"
[    91.186] (**) Option "_source" "_driver/libinput"
[    91.186] (II) libinput: Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control: is a virtual subdevice
[    91.186] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-1/5-1:1.1/0003:1B1C:1B2D.0002/input/input12/event6"
[    91.186] (II) XINPUT: Adding extended input device "Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control" (type: KEYBOARD, id 16)
[    91.186] (--) NVIDIA(GPU-0): Ancor Communications Inc ROG PG279Q (DFP-6): connected
[    91.186] (--) NVIDIA(GPU-0): Ancor Communications Inc ROG PG279Q (DFP-6): Internal DisplayPort
[    91.186] (--) NVIDIA(GPU-0): Ancor Communications Inc ROG PG279Q (DFP-6): 1440.0 MHz maximum pixel clock
[    91.186] (--) NVIDIA(GPU-0): 
[    92.037] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    92.037] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    92.037] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    92.037] (--) NVIDIA(GPU-0): 
[    92.037] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    92.037] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    92.037] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    92.037] (--) NVIDIA(GPU-0): 
[    92.037] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    92.037] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    92.037] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[    92.037] (--) NVIDIA(GPU-0): 
[    92.037] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    92.037] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    92.037] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    92.037] (--) NVIDIA(GPU-0): 
[    92.037] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    92.037] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[    92.037] (--) NVIDIA(GPU-0): DFP-4: 1440.0 MHz maximum pixel clock
[    92.037] (--) NVIDIA(GPU-0): 
[    92.037] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    92.037] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[    92.037] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[    92.037] (--) NVIDIA(GPU-0): 
[    92.037] (--) NVIDIA(GPU-0): Ancor Communications Inc ROG PG279Q (DFP-6): connected
[    92.037] (--) NVIDIA(GPU-0): Ancor Communications Inc ROG PG279Q (DFP-6): Internal DisplayPort
[    92.037] (--) NVIDIA(GPU-0): Ancor Communications Inc ROG PG279Q (DFP-6): 1440.0 MHz maximum pixel clock
[    92.037] (--) NVIDIA(GPU-0): 
[    92.039] (--) NVIDIA(GPU-0): DFP-7: disconnected
[    92.039] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[    92.039] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[    92.039] (--) NVIDIA(GPU-0): 
[    92.433] (EE) event26 - Corsair Corsair Gaming HARPOON RGB Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
[    92.897] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    92.897] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    92.897] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    92.897] (--) NVIDIA(GPU-0): 
[    92.897] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    92.897] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    92.897] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    92.897] (--) NVIDIA(GPU-0): 
[    92.897] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    92.897] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    92.897] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[    92.897] (--) NVIDIA(GPU-0): 
[    92.897] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    92.897] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    92.897] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    92.897] (--) NVIDIA(GPU-0): 
[    92.897] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    92.897] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[    92.897] (--) NVIDIA(GPU-0): DFP-4: 1440.0 MHz maximum pixel clock
[    92.897] (--) NVIDIA(GPU-0): 
[    92.897] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    92.897] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[    92.897] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[    92.897] (--) NVIDIA(GPU-0): 
[    92.898] (--) NVIDIA(GPU-0): Ancor Communications Inc ROG PG279Q (DFP-6): connected
[    92.898] (--) NVIDIA(GPU-0): Ancor Communications Inc ROG PG279Q (DFP-6): Internal DisplayPort
[    92.898] (--) NVIDIA(GPU-0): Ancor Communications Inc ROG PG279Q (DFP-6): 1440.0 MHz maximum pixel clock
[    92.898] (--) NVIDIA(GPU-0): 
[    92.900] (--) NVIDIA(GPU-0): DFP-7: disconnected
[    92.900] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[    92.900] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[    92.900] (--) NVIDIA(GPU-0): 
[    93.110] (II) NVIDIA(0): Setting mode "DP-4: 2560x1440_165 @2560x1440 +0+0 {ViewPortIn=2560x1440, ViewPortOut=2560x1440+0+0}"

I am quite new to linux and it is the first time i use linux as my primary os, arch was perhaps a poor choice for a first distro, but it is what it is.

edit(s): added some outputs/logs

Last edited by uugh-_- (2020-10-25 00:25:34)

Offline

#2 2020-10-24 23:29:17

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 17,620

Re: [SOLVED] opengl renderer is llvmpipe instead of my actual gpu

Welcome to the boards

Post a xorg.log and

pacman -Qs nvidia
dmesg | grep -E 'nvidia|i915'

maybe also post that xorg conf, you really usually don't need one and can break stuff with it incorrectly set up

Last edited by V1del (2020-10-24 23:30:02)

Offline

#3 2020-10-24 23:32:55

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 10,496

Re: [SOLVED] opengl renderer is llvmpipe instead of my actual gpu

Post the xorg log with and without that xorg.conf .

Please post

$ lspci -k

Last edited by Lone_Wolf (2020-10-24 23:33:33)


Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.


(A works at time B)  && (time C > time B ) ≠  (A works at time C)

Offline

#4 2020-10-24 23:59:53

uugh-_-
Member
Registered: 2020-10-24
Posts: 7

Re: [SOLVED] opengl renderer is llvmpipe instead of my actual gpu

I think i solved it, i found this https://bbs.archlinux.org/viewtopic.php … 2#p1921002 right now describing the same problem and i added this

Section "Files"
	ModulePath "/usr/lib/nvidia/xorg"
	ModulePath "/usr/lib/xorg/modules"
EndSection

to my xorg.conf. Idk if this is a "proper" solution so i posted the stuff u asked for aswell but i believe it is okay now.

V1del wrote:

Welcome to the boards

Thanks :) here u go, edited xorg.conf into my original post btw, its just generated from Xorg :0 -configure

~ $ pacman -Qs nvidia
local/egl-wayland 1.1.5-1
    EGLStream-based Wayland external platform
local/lib32-nvidia-utils 455.28-1
    NVIDIA drivers utilities (32-bit)
local/libvdpau 1.4-1
    Nvidia VDPAU library
local/libxnvctrl 455.28-1
    NVIDIA NV-CONTROL X extension
local/nvidia 455.28-7
    NVIDIA drivers for linux
local/nvidia-dkms 455.28-1
    NVIDIA drivers - module sources
local/nvidia-settings 455.28-1
    Tool for configuring the NVIDIA graphics driver
local/nvidia-utils 455.28-1
    NVIDIA drivers utilities
~ $ dmesg | grep -E 'nvidia|i915'
[   17.544316] nvidia: module license 'NVIDIA' taints kernel.
[   17.568618] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[   17.569139] nvidia 0000:09:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[   18.129997] caller _nv000708rm+0x1af/0x200 [nvidia] mapping multiple BARs
[   18.705185] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  455.28  Wed Sep 30 00:58:12 UTC 2020
~ $ lspci -k
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Root Complex
	Subsystem: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) I/O Memory Management Unit
	Subsystem: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) I/O Memory Management Unit
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge
	Kernel driver in use: pcieport
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
	DeviceName:  Onboard IGD
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge
	Kernel driver in use: pcieport
00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
00:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
00:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B
	Kernel driver in use: pcieport
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B
	Kernel driver in use: pcieport
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 59)
	Subsystem: Gigabyte Technology Co., Ltd Device 5001
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
	Subsystem: Gigabyte Technology Co., Ltd Device 5001
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 3
	Kernel driver in use: k10temp
	Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 7
03:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] X370 Series Chipset USB 3.1 xHCI Controller (rev 02)
	Subsystem: ASMedia Technology Inc. Device 1142
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
03:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] X370 Series Chipset SATA Controller (rev 02)
	Subsystem: ASMedia Technology Inc. Device 1062
	Kernel driver in use: ahci
03:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] X370 Series Chipset PCIe Upstream Port (rev 02)
	Kernel driver in use: pcieport
04:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
	Kernel driver in use: pcieport
04:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
	Kernel driver in use: pcieport
04:03.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
	Kernel driver in use: pcieport
04:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
	Kernel driver in use: pcieport
05:00.0 USB controller: ASMedia Technology Inc. ASM1143 USB 3.1 Host Controller
	Subsystem: Gigabyte Technology Co., Ltd Device 5007
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
06:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)
	Subsystem: Gigabyte Technology Co., Ltd Device e000
	Kernel driver in use: igb
	Kernel modules: igb
09:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3302
	Kernel driver in use: nvidia
	Kernel modules: nouveau, nvidia_drm, nvidia
09:00.1 Audio device: NVIDIA Corporation GP104 High Definition Audio Controller (rev a1)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3302
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
11:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Raven/Raven2 PCIe Dummy Function
	Subsystem: Advanced Micro Devices, Inc. [AMD] Zeppelin/Raven/Raven2 PCIe Dummy Function
11:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Platform Security Processor
	Subsystem: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Platform Security Processor
	Kernel driver in use: ccp
	Kernel modules: ccp
11:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) USB 3.0 Host Controller
	Subsystem: Gigabyte Technology Co., Ltd Device 5007
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
12:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Renoir PCIe Dummy Function
	Subsystem: Advanced Micro Devices, Inc. [AMD] Zeppelin/Renoir PCIe Dummy Function
12:00.2 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)
	Subsystem: Gigabyte Technology Co., Ltd Device b002
	Kernel driver in use: ahci
12:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller
	Subsystem: Gigabyte Technology Co., Ltd Device a182
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

edit: excuse the strange post order, i was kind of trying to solve it myself while writing this reply

Last edited by uugh-_- (2020-10-25 00:24:39)

Offline

#5 2020-10-25 09:53:09

Ropid
Member
Registered: 2015-03-09
Posts: 1,068

Re: [SOLVED] opengl renderer is llvmpipe instead of my actual gpu

uugh-_- wrote:

[...] i added this

Section "Files"
	ModulePath "/usr/lib/nvidia/xorg"
	ModulePath "/usr/lib/xorg/modules"
EndSection

to my xorg.conf.[...]

I'm guessing all your problems started because you created an xorg.conf file. That xorg.conf file then broke the Xorg config file that come with the "nvidia-utils" package. That config file is installed here:

/usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf

It has those "ModulePath" lines.

You could try to remove your xorg.conf file and then see what happens. Things should just work by default.

Offline

#6 2020-10-27 15:00:32

uugh-_-
Member
Registered: 2020-10-24
Posts: 7

Re: [SOLVED] opengl renderer is llvmpipe instead of my actual gpu

Ropid wrote:

I'm guessing all your problems started because you created an xorg.conf file. That xorg.conf file then broke the Xorg config file that come with the "nvidia-utils" package. That config file is installed here:

/usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf

It has those "ModulePath" lines.

You could try to remove your xorg.conf file and then see what happens. Things should just work by default.

When i run without xorg.conf this is the log i get

[  2464.856] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[  2464.857] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[  2464.858] Build Operating System: Linux Arch Linux
[  2464.858] Current Operating System: Linux arch 5.8.14-zen1-1-zen #1 ZEN SMP PREEMPT Thu, 08 Oct 2020 00:01:25 +0000 x86_64
[  2464.858] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=62ffd866-32dd-4d3a-bd8f-2e39f8abb915 rw loglevel=3 quiet
[  2464.859] Build Date: 02 September 2020  06:17:44AM
[  2464.859]  
[  2464.860] Current version of pixman: 0.40.0
[  2464.861] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2464.861] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2464.863] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 27 15:45:15 2020
[  2464.864] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2464.864] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2464.864] (==) No Layout section.  Using the first Screen section.
[  2464.864] (==) No screen section available. Using defaults.
[  2464.864] (**) |-->Screen "Default Screen Section" (0)
[  2464.864] (**) |   |-->Monitor "<default monitor>"
[  2464.865] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  2464.865] (==) Automatically adding devices
[  2464.865] (==) Automatically enabling devices
[  2464.865] (==) Automatically adding GPU devices
[  2464.865] (==) Automatically binding GPU devices
[  2464.865] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  2464.865] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  2464.865] 	Entry deleted from font path.
[  2464.865] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[  2464.865] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2464.865] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2464.865] (II) Module ABI versions:
[  2464.865] 	X.Org ANSI C Emulation: 0.4
[  2464.865] 	X.Org Video Driver: 24.1
[  2464.865] 	X.Org XInput driver : 24.1
[  2464.865] 	X.Org Server Extension : 10.0
[  2464.865] (++) using VT number 1

[  2464.868] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[  2464.871] (--) PCI:*(9@0:0:0) 10de:1b81:1462:3302 rev 161, Mem @ 0xfc000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[  2464.871] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  2464.871] (II) LoadModule: "glx"
[  2464.871] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2464.873] (II) Module glx: vendor="X.Org Foundation"
[  2464.873] 	compiled for 1.20.9, module version = 1.0.0
[  2464.873] 	ABI class: X.Org Server Extension, version 10.0
[  2464.873] (==) Matched nouveau as autoconfigured driver 0
[  2464.873] (==) Matched nv as autoconfigured driver 1
[  2464.873] (==) Matched modesetting as autoconfigured driver 2
[  2464.873] (==) Matched fbdev as autoconfigured driver 3
[  2464.873] (==) Matched vesa as autoconfigured driver 4
[  2464.873] (==) Assigned the driver to the xf86ConfigLayout
[  2464.873] (II) LoadModule: "nouveau"
[  2464.873] (WW) Warning, couldn't open module nouveau
[  2464.873] (EE) Failed to load module "nouveau" (module does not exist, 0)
[  2464.873] (II) LoadModule: "nv"
[  2464.873] (WW) Warning, couldn't open module nv
[  2464.873] (EE) Failed to load module "nv" (module does not exist, 0)
[  2464.873] (II) LoadModule: "modesetting"
[  2464.873] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  2464.874] (II) Module modesetting: vendor="X.Org Foundation"
[  2464.874] 	compiled for 1.20.9, module version = 1.20.9
[  2464.874] 	Module class: X.Org Video Driver
[  2464.874] 	ABI class: X.Org Video Driver, version 24.1
[  2464.874] (II) LoadModule: "fbdev"
[  2464.874] (WW) Warning, couldn't open module fbdev
[  2464.874] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  2464.874] (II) LoadModule: "vesa"
[  2464.874] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  2464.874] (II) Module vesa: vendor="X.Org Foundation"
[  2464.874] 	compiled for 1.20.9, module version = 2.5.0
[  2464.874] 	Module class: X.Org Video Driver
[  2464.874] 	ABI class: X.Org Video Driver, version 24.1
[  2464.874] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  2464.874] (II) VESA: driver for VESA chipsets: vesa
[  2464.874] (EE) open /dev/dri/card0: No such file or directory
[  2464.874] (WW) Falling back to old probe method for modesetting
[  2464.874] (EE) open /dev/dri/card0: No such file or directory
[  2464.874] vesa: Refusing to run on UEFI
[  2464.874] (EE) Screen 0 deleted because of no matching config section.
[  2464.874] (II) UnloadModule: "modesetting"
[  2464.874] (EE) Device(s) detected, but none match those in the config file.
[  2464.874] (EE) 
Fatal server error:
[  2464.874] (EE) no screens found(EE) 
[  2464.874] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  2464.874] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  2464.874] (EE) 
[  2464.877] (EE) Server terminated with error (1). Closing log file.

Offline

Board footer

Powered by FluxBB