You are not logged in.

Pages: 1

#1 2020-10-28 10:52:35

Avatar
Member
Registered: 2010-04-02
Posts: 31

[Solved] CORSAIR HS70 Pro Wireless Gaming Headset mic stops working

Hi guys,

I'm using the CORSAIR HS70 Pro Wireless Gaming Headset on arch linux with my Lenovo Thinkpad T560.
Most of the time I no problems with the headset but then suddenly the mic stops working and no amount of replugging or restarting fixes the issue.
It's not a hardware issue because when I try on my desktop PC, it works perfectly again.
I don't have much experience with debugging this type of issue.
One thing I did notice is that when I replug the usb dongle while watching journalctl, I see the following:

Oct 28 12:30:46 brewmaster pulseaudio[1052]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="usb-Corsair_CORSAIR_HS70_Pro_Wireless_Gaming_Headset-00" card_name="alsa_card.usb-Corsair_CORSAIR_HS70_Pro_Wireless_Gaming_Headset-00" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Oct 28 12:30:46 brewmaster systemd-coredump[2099]: [?] Process 1363 (pipewire-media-) of user 1000 dumped core.
                                                   
                                                   Stack trace of thread 1363:
                                                   #0  0x00007f79d32c0590 pw_proxy_add_listener (libpipewire-0.3.so.0 + 0x55590)
                                                   #1  0x0000555fd984873f n/a (pipewire-media-session + 0x1773f)
                                                   #2  0x0000555fd9842de7 n/a (pipewire-media-session + 0x11de7)
                                                   #3  0x00007f79d323d7d6 n/a (libdbus-1.so.3 + 0x277d6)
                                                   #4  0x00007f79d322d3bd dbus_connection_dispatch (libdbus-1.so.3 + 0x173bd)
                                                   #5  0x00007f79d33361a7 n/a (libspa-dbus.so + 0x11a7)
                                                   #6  0x00007f79d334138b n/a (libspa-support.so + 0x738b)
                                                   #7  0x00007f79d32a72cb pw_main_loop_run (libpipewire-0.3.so.0 + 0x3c2cb)
                                                   #8  0x0000555fd984083d n/a (pipewire-media-session + 0xf83d)
                                                   #9  0x00007f79d3075152 __libc_start_main (libc.so.6 + 0x28152)
                                                   #10 0x0000555fd9840b9e n/a (pipewire-media-session + 0xfb9e)
                                                   
                                                   Stack trace of thread 1366:
                                                   #0  0x00007f79d314d5de epoll_wait (libc.so.6 + 0x1005de)
                                                   #1  0x00007f79d3349fc1 n/a (libspa-support.so + 0xffc1)
                                                   #2  0x00007f79d33412f4 n/a (libspa-support.so + 0x72f4)
                                                   #3  0x00007f79d3291fb0 n/a (libpipewire-0.3.so.0 + 0x26fb0)
                                                   #4  0x00007f79d302e3e9 start_thread (libpthread.so.0 + 0x93e9)
                                                   #5  0x00007f79d314d293 __clone (libc.so.6 + 0x100293)
Oct 28 12:30:46 brewmaster systemd[1]: systemd-coredump@0-2098-0.service: Succeeded.


Should I go straight to filing a bug report or does someone have some suggestions on how to debug this issue?
Thanks in advance

Last edited by Avatar (2020-10-28 13:23:37)

Offline

#2 2020-10-28 11:00:16

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,353

Re: [Solved] CORSAIR HS70 Pro Wireless Gaming Headset mic stops working

Are you actively and knowingly using pipewire here ? This reads like pulse and pipewire are both running and get into a conflict on who gets to control the card.

Post 

systemctl --user status pulseaudio{.socket,.service} pipewire.{socket,service}

and wrap that in 

[code]code here[/code]

tags.

Offline

#3 2020-10-28 11:06:29

Avatar
Member
Registered: 2010-04-02
Posts: 31

Re: [Solved] CORSAIR HS70 Pro Wireless Gaming Headset mic stops working

Thanks for the resonse V1del

I'm not deliberately using pipewire. I only remember doing a regular gnome install via the wiki entry.

 
● pulseaudio.socket - Sound System
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.socket; enabled; vendor preset: enabled)
     Active: active (running) since Wed 2020-10-28 12:25:40 SAST; 36min ago
   Triggers: ● pulseaudio.service
     Listen: /run/user/1000/pulse/native (Stream)
     CGroup: /user.slice/user-1000.slice/user@1000.service/pulseaudio.socket

Oct 28 12:25:40 brewmaster systemd[943]: Listening on Sound System.

● pulseaudio.service - Sound Service
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; disabled; vendor preset: enabled)
     Active: active (running) since Wed 2020-10-28 12:25:41 SAST; 36min ago
TriggeredBy: ● pulseaudio.socket
   Main PID: 1052 (pulseaudio)
     CGroup: /user.slice/user-1000.slice/user@1000.service/pulseaudio.service
             ├─1052 /usr/bin/pulseaudio --daemonize=no --log-target=journal
             └─1064 /usr/lib/pulse/gsettings-helper

Oct 28 12:25:41 brewmaster systemd[943]: Starting Sound Service...
Oct 28 12:25:41 brewmaster systemd[943]: Started Sound Service.
Oct 28 12:30:46 brewmaster pulseaudio[1052]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="usb-Corsair_CORSAIR_HS70_Pro_Wireless_Gaming_Headset-00" card_name="alsa_card.usb-Corsair_CORSAIR_HS70_Pro_Wireless_Gam>

● pipewire.socket - Multimedia System
     Loaded: loaded (/usr/lib/systemd/user/pipewire.socket; enabled; vendor preset: enabled)
     Active: active (running) since Wed 2020-10-28 12:25:40 SAST; 36min ago
   Triggers: ● pipewire.service
     Listen: /run/user/1000/pipewire-0 (Stream)
     CGroup: /user.slice/user-1000.slice/user@1000.service/pipewire.socket

Oct 28 12:25:40 brewmaster systemd[943]: Listening on Multimedia System.

● pipewire.service - Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; disabled; vendor preset: enabled)
     Active: active (running) since Wed 2020-10-28 12:25:43 SAST; 36min ago
TriggeredBy: ● pipewire.socket
   Main PID: 1361 (pipewire)
     CGroup: /user.slice/user-1000.slice/user@1000.service/pipewire.service
             └─1361 /usr/bin/pipewire

Oct 28 12:25:43 brewmaster systemd[943]: Started Multimedia Service.
Oct 28 12:25:43 brewmaster pipewire[1361]: [W][000000021.801984][module-protocol-native.c:386 client_new()] server 0x557f6ecca9f0: no peersec: Protocol not available
Oct 28 12:25:43 brewmaster pipewire[1361]: [W][000000021.820799][module-protocol-native.c:386 client_new()] server 0x557f6ecca9f0: no peersec: Protocol not available
Oct 28 12:25:43 brewmaster pipewire[1361]: [W][000000021.821177][module-protocol-native.c:386 client_new()] server 0x557f6ecca9f0: no peersec: Protocol not available
Oct 28 12:25:43 brewmaster pipewire[1363]: [E][000000021.832884][backend-ofono.c:447 ofono_register_reply()] Register() failed: org.freedesktop.DBus.Error.ServiceUnknown
Oct 28 12:25:44 brewmaster pipewire[1363]: [E][000000021.860348][core.c:71 core_event_error()] core 0x555fdaea6250: proxy 0x555fdaec4fb0 id:4: seq:4 res:-2 (No such file or directory) msg:"can't create device: No such file or directory"
Oct 28 12:25:44 brewmaster pipewire[1363]: [E][000000021.860363][media-session.c:1951 core_error()] error id:4 seq:4 res:-2 (No such file or directory): can't create device: No such file or directory
Oct 28 12:30:46 brewmaster systemd-coredump[2099]: Process 1363 (pipewire-media-) of user 1000 dumped core.
                                                   
                                                   Stack trace of thread 1363:
                                                   #0  0x00007f79d32c0590 pw_proxy_add_listener (libpipewire-0.3.so.0 + 0x55590)
                                                   #1  0x0000555fd984873f n/a (pipewire-media-session + 0x1773f)
                                                   #2  0x0000555fd9842de7 n/a (pipewire-media-session + 0x11de7)

Do I remove pipewire in that case?

Offline

#4 2020-10-28 11:11:35

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,353

Re: [Solved] CORSAIR HS70 Pro Wireless Gaming Headset mic stops working

Reads weird, though I'm unsure this will be actually related, try masking pipewire 

systemctl --user mask --now pipewire.{socket,service}

are there any messages in dmesg? Does the headset as a headset work fine just the mic not? What's your 

aplay -lL
arecord -l
sudo fuser -v /dev/snd/*
pacmd list-cards

pipewire is a dep for a few things and generally has its uses, will be hard to just remove

Last edited by V1del (2020-10-28 11:12:32)

Offline

#5 2020-10-28 11:27:50

Avatar
Member
Registered: 2010-04-02
Posts: 31

Re: [Solved] CORSAIR HS70 Pro Wireless Gaming Headset mic stops working

systemctl --user mask --now pipewire.{socket,service}

Oh, very cool. I just replugged the dongle and the mic is working again.

The headset was working fine for output, just the mic did not work.

 
aplay -lL
null
    Discard all samples (playback) or generate zero samples (capture)
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pipewire
    PipeWire Sound Server
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
    HDA Intel PCH, ALC293 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC293 Analog
    Front output / input
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC293 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC293 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC293 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC293 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC293 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC293 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
hdmi:CARD=PCH,DEV=1
    HDA Intel PCH, HDMI 1
    HDMI Audio Output
hdmi:CARD=PCH,DEV=2
    HDA Intel PCH, HDMI 2
    HDMI Audio Output
hdmi:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 3
    HDMI Audio Output
hdmi:CARD=PCH,DEV=4
    HDA Intel PCH, HDMI 4
    HDMI Audio Output
usbstream:CARD=PCH
    HDA Intel PCH
    USB Stream Output
sysdefault:CARD=Gamin
    CORSAIR HS70 Pro Wireless Gamin, USB Audio
    Default Audio Device
front:CARD=Gamin,DEV=0
    CORSAIR HS70 Pro Wireless Gamin, USB Audio
    Front output / input
surround21:CARD=Gamin,DEV=0
    CORSAIR HS70 Pro Wireless Gamin, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Gamin,DEV=0
    CORSAIR HS70 Pro Wireless Gamin, USB Audio
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Gamin,DEV=0
    CORSAIR HS70 Pro Wireless Gamin, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Gamin,DEV=0
    CORSAIR HS70 Pro Wireless Gamin, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Gamin,DEV=0
    CORSAIR HS70 Pro Wireless Gamin, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Gamin,DEV=0
    CORSAIR HS70 Pro Wireless Gamin, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Gamin,DEV=0
    CORSAIR HS70 Pro Wireless Gamin, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=Gamin
    CORSAIR HS70 Pro Wireless Gamin
    USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC293 Analog [ALC293 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Gamin [CORSAIR HS70 Pro Wireless Gamin], device 0: USB Audio [USB Audio]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC293 Analog [ALC293 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 1: Gamin [CORSAIR HS70 Pro Wireless Gamin], device 0: USB Audio [USB Audio]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
sudo fuser -v /dev/snd/*
                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  pico       1052 F.... pulseaudio
/dev/snd/controlC1:  pico       1052 F.... pulseaudio
/dev/snd/pcmC0D0c:   pico       1052 F...m pulseaudio
/dev/snd/pcmC0D0p:   pico       1052 F...m pulseaudio
/dev/snd/pcmC1D0c:   pico       1052 F...m pulseaudio
/dev/snd/pcmC1D0p:   pico       1052 F...m pulseaudio
pacmd list-cards        
2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1f.3>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf1240000 irq 138"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d70"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
		output:analog-surround-40: Analog Surround 4.0 Output (priority 1200, available: unknown)
		output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 1265, available: unknown)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5965, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: unknown)
		output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 5765, available: unknown)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
		output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5765, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
		output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (priority 5765, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
		output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
		output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
		output:hdmi-stereo-extra4+input:analog-stereo: Digital Stereo (HDMI 5) Output + Analog Stereo Input (priority 5765, available: no)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
		output:hdmi-surround-extra4+input:analog-stereo: Digital Surround 5.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
		output:hdmi-surround71-extra4+input:analog-stereo: Digital Surround 7.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1f.3.analog-stereo/#0: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
		alsa_input.pci-0000_00_1f.3.analog-stereo/#1: Built-in Audio Analog Stereo
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-dock-mic: Dock Microphone (priority 7800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "S24D590"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 2
	name: <alsa_card.usb-Corsair_CORSAIR_HS70_Pro_Wireless_Gaming_Headset-00>
	driver: <module-alsa-card.c>
	owner module: 27
	properties:
		alsa.card = "1"
		alsa.card_name = "CORSAIR HS70 Pro Wireless Gamin"
		alsa.long_card_name = "Corsair CORSAIR HS70 Pro Wireless Gamin at usb-0000:00:14.0-1, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:1:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card1"
		udev.id = "usb-Corsair_CORSAIR_HS70_Pro_Wireless_Gaming_Headset-00"
		device.bus = "usb"
		device.vendor.id = "1b1c"
		device.vendor.name = "Corsair"
		device.product.id = "0a4f"
		device.product.name = "CORSAIR HS70 Pro Wireless Gaming Headset"
		device.serial = "Corsair_CORSAIR_HS70_Pro_Wireless_Gaming_Headset"
		device.form_factor = "headset"
		device.string = "1"
		device.description = "CORSAIR HS70 Pro Wireless Gaming Headset"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-headset-usb"
		device.intended_roles = "phone"
	profiles:
		input:mono-fallback: Mono Input (priority 1, available: unknown)
		input:multichannel-input: Multichannel Input (priority 1, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
		output:analog-stereo+input:mono-fallback: Analog Stereo Output + Mono Input (priority 6501, available: unknown)
		output:analog-stereo+input:multichannel-input: Analog Stereo Output + Multichannel Input (priority 6501, available: unknown)
		output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500, available: unknown)
		output:iec958-stereo+input:mono-fallback: Digital Stereo (IEC958) Output + Mono Input (priority 5501, available: unknown)
		output:iec958-stereo+input:multichannel-input: Digital Stereo (IEC958) Output + Multichannel Input (priority 5501, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:mono-fallback>
	sinks:
		alsa_output.usb-Corsair_CORSAIR_HS70_Pro_Wireless_Gaming_Headset-00.analog-stereo/#2: CORSAIR HS70 Pro Wireless Gaming Headset Analog Stereo
	sources:
		alsa_output.usb-Corsair_CORSAIR_HS70_Pro_Wireless_Gaming_Headset-00.analog-stereo.monitor/#4: Monitor of CORSAIR HS70 Pro Wireless Gaming Headset Analog Stereo
		alsa_input.usb-Corsair_CORSAIR_HS70_Pro_Wireless_Gaming_Headset-00.mono-fallback/#5: CORSAIR HS70 Pro Wireless Gaming Headset Mono
	ports:
		analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		multichannel-input: Multichannel Input (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
		iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:

Offline

#6 2020-10-28 12:02:32

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,353

Re: [Solved] CORSAIR HS70 Pro Wireless Gaming Headset mic stops working

Well then this is technically the solution, though I'm unsure whether masking the socket will break actually needed users of pipewire (... If you are using wayland and need to do screensharing/-recording or so you aren't going to get around it afaik) ... You could also opt for the other direction and disable pulse instead of pipewire though I have absolutely no hands on experience here (... though I might try that for a while when feeling experimental, but have quite a lot of other things on my plate right now)

If you do consider this the solution please mark as [SOLVED] by editing the title in your first post.

Offline

#7 2020-10-28 13:25:11

Avatar
Member
Registered: 2010-04-02
Posts: 31

Re: [Solved] CORSAIR HS70 Pro Wireless Gaming Headset mic stops working

Thanks again.

I'll experiment with this solution and see if it breaks anything else.
If it does, I'll just open a bug report so this can be looked at upstream.

Offline

Pages: 1

Board footer

Powered by FluxBB