Arch Linux

dont_know

Member

Registered: 2020-11-03

Posts: 1

Logitech G502 usb mouse not detected.

Hello,

For the last few days my right click didn't work, so I unplugged the mouse and plugged it back in, but now it's not being detected at all. I've not set up a Xorg config file ever. I've got three monitors, so I think I'd have to go through some learning curve, and since it's worked without needing a config file I assume it should continue that way... Here's some output:

lsusb:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0a5c:21e8 Broadcom Corp. BCM20702A0 Bluetooth 4.0
Bus 001 Device 003: ID 1038:1250 SteelSeries ApS SteelSeries Arctis 5
Bus 001 Device 002: ID 04b4:2018 Cypress Semiconductor Corp. 
Bus 001 Device 005: ID 0951:1666 Kingston Technology DataTraveler 100 G3/G4/SE9 G2/50
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Xorg.0.log:

[  2284.087] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[  2284.087] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[  2284.087] Build Operating System: Linux Arch Linux
[  2284.087] Current Operating System: Linux archdd 5.9.3-zen1-1-zen #1 ZEN SMP PREEMPT Sun, 01 Nov 2020 13:00:22 +0000 x86_64
[  2284.087] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=b68d0664-14e4-49f0-95e4-715382fea506 rw loglevel=3 quiet
[  2284.087] Build Date: 02 September 2020  06:17:44AM
[  2284.087]  
[  2284.087] Current version of pixman: 0.40.0
[  2284.087] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2284.087] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2284.087] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov  3 10:58:20 2020
[  2284.087] (II) Module ABI versions:
[  2284.087] 	X.Org ANSI C Emulation: 0.4
[  2284.087] 	X.Org Video Driver: 24.1
[  2284.087] 	X.Org XInput driver : 24.1
[  2284.087] 	X.Org Server Extension : 10.0
[  2284.087] (--) using VT number 4

[  2284.087] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  2284.088] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2284.088] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[  2284.088] (II) xfree86: Adding drm device (/dev/dri/card1)
[  2284.088] (II) Platform probe for /sys/devices/pci0000:00/0000:00:1c.4/0000:05:00.0/drm/card1
[  2284.090] (--) PCI: (0@0:2:0) 8086:1912:1458:d000 rev 6, Mem @ 0xee000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64
[  2284.090] (--) PCI:*(5@0:0:0) 1002:67df:1da2:e366 rev 239, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xef000000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[  2284.090] List of video drivers:
[  2284.090] 	modesetting
[  2284.090] 	vesa
[  2284.090] (II) LoadModule: "modesetting"
[  2284.090] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  2284.091] (II) Module modesetting: vendor="X.Org Foundation"
[  2284.091] 	compiled for 1.20.9, module version = 1.20.9
[  2284.091] 	Module class: X.Org Video Driver
[  2284.091] 	ABI class: X.Org Video Driver, version 24.1
[  2284.091] (II) LoadModule: "vesa"
[  2284.091] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  2284.091] (II) Module vesa: vendor="X.Org Foundation"
[  2284.091] 	compiled for 1.20.9, module version = 2.5.0
[  2284.091] 	Module class: X.Org Video Driver
[  2284.091] 	ABI class: X.Org Video Driver, version 24.1
[  2284.091] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  2284.091] (II) VESA: driver for VESA chipsets: vesa
[  2284.114] (++) Using config file: "/root/xorg.conf.new"
[  2284.114] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2284.115] (==) ServerLayout "X.org Configured"
[  2284.115] (**) |-->Screen "Screen0" (0)
[  2284.115] (**) |   |-->Monitor "Monitor0"
[  2284.115] (**) |   |-->Device "Card0"
[  2284.115] (**) |-->Screen "Screen1" (1)
[  2284.115] (**) |   |-->Monitor "Monitor1"
[  2284.116] (**) |   |-->Device "Card1"
[  2284.116] (**) |-->Input Device "Mouse0"
[  2284.116] (**) |-->Input Device "Keyboard0"
[  2284.116] (==) Automatically adding devices
[  2284.116] (==) Automatically enabling devices
[  2284.116] (==) Automatically adding GPU devices
[  2284.116] (==) Automatically binding GPU devices
[  2284.116] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  2284.116] (WW) The directory "/usr/share/fonts/misc" does not exist.
[  2284.116] 	Entry deleted from font path.
[  2284.116] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  2284.116] 	Entry deleted from font path.
[  2284.116] (WW) The directory "/usr/share/fonts/misc" does not exist.
[  2284.116] 	Entry deleted from font path.
[  2284.116] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  2284.116] 	Entry deleted from font path.
[  2284.116] (**) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[  2284.116] (**) ModulePath set to "/usr/lib/xorg/modules"
[  2284.116] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  2284.116] (WW) Disabling Mouse0
[  2284.116] (WW) Disabling Keyboard0
[  2284.116] (WW) Falling back to old probe method for modesetting
[  2284.117] (II) modeset(2): using default device
[  2284.117] (II) modeset(2): using default device
[  2284.117] Number of created screens does not match number of detected devices.
  Configuration failed.
[  2284.117] (EE) Server terminated with error (2). Closing log file.

uname -a:
Linux archdd 5.8.4-zen1-1-zen #1 ZEN SMP PREEMPT Wed, 26 Aug 2020 18:35:38 +0000 x86_64 GNU/Linux

Whatever other output is useful I will send along. I am seeing that hotplugging is disabling Mouse0, but also that my logitech mouse is not being detected, whereas before it was. As you can see I've already downgraded my kernel to 5.8.4. The problem existed with the newest zen kernel too. The problem didn't exist when I had 5.8.4 in the past, so I don't think it's the kernel. It might be a xorg update, but there are so many dependencies for Xorg that I'm scared of breaking my system by downgrading...

edit: Another mouse works. I think that the issue is with xinit. I'm going to wait until a new version is released, update, and try again. Will report here.
Thanks

Last edited by dont_know (2020-11-04 23:24:23)

ua4000

Member

Registered: 2015-10-14

Posts: 558

Re: Logitech G502 usb mouse not detected.

For the last few days my right click didn't work,

This sounds more like a failing hardware - mouse switches don't work forever. Test the mouse on another machine.

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 25,231

Re: Logitech G502 usb mouse not detected.

xinit has absolutely no relation to anything that happens once xorg is started. if it's not the kernel and indeed not a hw issue, another potential culprit would be new libinput versions