Arch Linux

loqs

Member

Registered: 2014-03-06

Posts: 18,047

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

The message changed as a result of code clean up see https://github.com/torvalds/linux/commi … 41b1382eb4

Gonzo2028

Member

Registered: 2020-02-02

Posts: 5

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

Does anyone got rid of those messages?
I found no solution on my x570-e-gaming + 3950x Ryzen.

Regards

skeetre

Member

Registered: 2020-09-28

Posts: 1

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

I created a workaround for this... I changed line 254 in arch/x86/kernel/irq.c  from:

 pr_emerg_ratelimited("%s: %d.%u No irq handler for vector\n", 

to

 pr_err_ratelimited("%s: %d.%u No irq handler for vector\n", 

That way using loglevel=3 on the kernel cmdline you don't see this silly error message.

It may not be the best or preferred way of doing things, but it works for me. And it's still sending an error message, just not as an emergency error message. 

And Gonzo2028, this is on my MSI x570 Edge with  3900x.

Here's a patch file:

https://mudz.org/no-irq-handler-for-vector.patch

Last edited by skeetre (2020-10-09 14:59:54)

SupKurtJ

Member

Registered: 2015-07-18

Posts: 46

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

Hi,

My motherboard it's a GIGABYTE X570 I AORUS PRO WIFI (rev. 1.0).

I have the same error with latest update (F20, F21, F30) :

F30	9,61 MB	2020/09/15	Update AMD AGESA ComboV2 1.0.8.1 for AMD Ryzen 5000 processors support
F21	9,49 MB	2020/08/20	Improve memory compatibility
F20	9,49 MB	2020/07/10	Update AMD AGESA ComboV2 1.0.0.2 for 3rd Gen AMD Ryzen XT series processors and New Gen AMD Ryzen with Radeon Graphics processors support
				Fix AMD security vulnerabilities for SMM Callout Privilege Escalation

Error message :

do_IRQ: 1.55 No irq handler for vector
do_IRQ: 2.55 No irq handler for vector
do_IRQ: 3.55 No irq handler for vector
do_IRQ: 4.55 No irq handler for vector
do_IRQ: 5.55 No irq handler for vector
do_IRQ: 8.55 No irq handler for vector
do_IRQ: 9.55 No irq handler for vector
do_IRQ: 10.55 No irq handler for vector
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.GPP8._DSM], AE_ALREADY_EXISTS (20200110/dswload2-326)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)

torrenator

Member

Registered: 2020-11-08

Posts: 8

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

Ok,

So I have been experiencing the same error with almost the same board. I actually have the Gigabyte X570 Aorus Elite Rev 1.0. Running the BIOS version F30 right now. I don't know anything to help this right now but it seems to me that it is a regression since the F11 version of the BIOS. I forwarded this information in a support request to Gigabyte. Maybe they will do something about it, but as with most support requests like this it is just a shot in the dark. It could take 7 days according to the site. So if there is no answer in the following week we know our answer.

kereldude

Member

Registered: 2020-11-10

Posts: 2

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

I had the same error on MSI X570 MEG ACE. Disabling IOMMU in the BIOS gets rid of the message for me.

greenleafvolatile

Member

Registered: 2019-08-10

Posts: 20

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

Hey,

I'm seeing the same message after upgrading the BIOS (f11 -> f30) on an X570 Aorus Elite. Not experiencing any additional issues.

Tried disabling IOMMU, but no dice.

Last edited by greenleafvolatile (2020-11-18 10:24:20)

kereldude

Member

Registered: 2020-11-10

Posts: 2

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

I have newest BIOS containing AGESA ComboAm4v2PI 1.1.0.0 Patch C. Maybe that's why we have different results.
You could try disabling CPU Virtualization alltogether if you don't need it? See if that stops the error message.

subterfugium

Member

Registered: 2020-11-15

Posts: 1

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

I had the same error on MSI X570 MEG ACE. Disabling IOMMU in the BIOS gets rid of the message for me.

Gigabyte Aorus Elite B550, disabling IOMMU also get rid of this message and boot is 10-15 seconds faster.

torrenator

Member

Registered: 2020-11-08

Posts: 8

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

I have gotten a response to my ticket at gigabyte. Looks like they are working on it.

Dear customer,

Thank you for emailing GIGABYTE.
We would like to help you on this issue.

We are looking into the issue and will come back to you ASAP after figuring it out clearly.

Thanks for your patience.

Regards

GIGABYTE Team

PopeRigby

Member

Registered: 2019-10-19

Posts: 110

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

I have an MSI B450 TOMAHAWK MAX ATX AM4, but disabling IOMMU didn't work.

---

"I even found myself driving by convenience stores... that weren't on the way home."

SupKurtJ

Member

Registered: 2015-07-18

Posts: 46

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

I have gotten a response too by Gigabyte support :

Dear customer,

Our team can duplicated the problem.
Needs to be fixed by AMD.

We will reflect this issue to AMD

Thank you for emailing GIGABYTE.
We would like to help you on this issue.

We are looking into the issue and will come back to you ASAP after figuring it out clearly.

Thanks for your patience.

Regards

GIGABYTE Team

SupKurtJ

Member

Registered: 2015-07-18

Posts: 46

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

I try the latest bios version of my GIGABYTE X570 I AORUS PRO WIFI (rev. 1.0) motherboard (F31e 2020/10/29 - AMD AGESA ComboV2 1.1.0.0 C).

And the errors still here.

[    0.000000] __common_interrupt: 1.55 No irq handler for vector
[    0.113261]   #2
[    0.000000] __common_interrupt: 2.55 No irq handler for vector
[    0.113419]   #3
[    0.000000] __common_interrupt: 3.55 No irq handler for vector
[    0.116748]   #4
[    0.000000] __common_interrupt: 4.55 No irq handler for vector
[    0.118888]   #5
[    0.000000] __common_interrupt: 5.55 No irq handler for vector
[    0.120078]   #6
[    0.000000] __common_interrupt: 6.55 No irq handler for vector
[    0.123415]   #7
[    0.000000] __common_interrupt: 7.55 No irq handler for vector
[    0.125552]   #8
[    0.000000] __common_interrupt: 8.55 No irq handler for vector
[    0.126772]   #9
[    0.000000] __common_interrupt: 9.55 No irq handler for vector
[    0.130081]  #10
[    0.000000] __common_interrupt: 10.55 No irq handler for vector

After that, I tested to disable IOMMU.
And it work. Errors do not appear anymore.

SVM option if disabled or enabled, it does not affect the problem.

It is only if IOMMU is Auto or Enabled, the issue appear.

Last edited by SupKurtJ (2020-11-21 10:58:48)

SupKurtJ

Member

Registered: 2015-07-18

Posts: 46

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

Hey,

I'm seeing the same message after upgrading the BIOS (f11 -> f30) on an X570 Aorus Elite. Not experiencing any additional issues.

Tried disabling IOMMU, but no dice.

Try a bios with the latest AMD AGESA ComboV2 1.1.0.0 C like the F31e or more if available. And tell me if the issue still here, after disabling IOMMU on the bios of course.

Last edited by SupKurtJ (2020-11-21 10:29:29)

Luh

Member

Registered: 2018-01-22

Posts: 24

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

Hi,

I have a Gigabyte A520M H with a R3 3100.

I have the same problem with the latest BIOS (F11g [with AGESA 1.1.0.0 C]).
Unable to get rid of it with IOMMU disabled and/or "pci=noaer pci=nomsi".

SupKurtJ

Member

Registered: 2015-07-18

Posts: 46

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

Hi,

I have a Gigabyte A520M H with a R3 3100.

I have the same problem with the latest BIOS (F11g [with AGESA 1.1.0.0 C]).
Unable to get rid of it with IOMMU disabled and/or "pci=noaer pci=nomsi".

Can you add this on your grub amd_iommu=off ?

Last edited by SupKurtJ (2020-11-21 11:08:07)

Luh

Member

Registered: 2018-01-22

Posts: 24

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

Hi,

I have a Gigabyte A520M H with a R3 3100.

I have the same problem with the latest BIOS (F11g [with AGESA 1.1.0.0 C]).
Unable to get rid of it with IOMMU disabled and/or "pci=noaer pci=nomsi".

Can you add this on your grub amd_iommu=off ?

Same problem, with "pci=noaer pci=nomsi amd_iommu=off" and IOMMU disabled in the BIOS.

SupKurtJ

Member

Registered: 2015-07-18

Posts: 46

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

The only difference it is your chipset AMD A520. I do not know why whis an X570 chipset, this workaround works.
Anyway, we have to wait for them to solve this issue....

Last edited by SupKurtJ (2020-11-21 13:25:24)

ptrxyz

Member

Registered: 2013-03-23

Posts: 4

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

I can confirm this problem with X570 and Ryzen 9 5900X. An old BIOS with old AGESA Version works fine, a new one seems broken. I worked around this by adding:
`acpi=noirq` to my boot parameters, which solves the issue and results in a stable system.

However, IRQs will now be sent to all cores to be handled (instead of just to one core), which leads to a minor (for me not noticeable) performance impact. Still better than random reboots for sure.

Let's wait for AMD to fix it ...

Last edited by ptrxyz (2020-11-22 17:46:53)

pontifikas

Member

Registered: 2019-12-17

Posts: 10

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

Same issue here after updating the bios of my ASUS ROG Strix X570-E Gaming (Ryzen 3600X) from the one the Mobo shipped with a year ago to the latest(Version 2812 Beta Version) 2 days ago.
But so far my system has been stable.

SupKurtJ

Member

Registered: 2015-07-18

Posts: 46

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

I sent a message to AMD here https://www.amd.com/en/support/contact-email-form

Last edited by SupKurtJ (2020-11-24 16:26:39)

toki1990

Member

Registered: 2019-11-03

Posts: 17

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

i have same problem with 'asus tuf gaming b450m pro s,  ryzen 7 3700x'. boot showing "no irq handler for vector" message for 9-10 times. i'm using kernel 5.10rc5. i'm using last bios of my motherboard. i'm using bios Version 2409.
pls focus. my bios agesa is combov2 1.1.8.0. newer than 1.1.0.0.c

i'm tried acpi=noirq. "no irq handler for vector" message is gone. but i have random reboots again.

Last edited by toki1990 (2020-12-06 20:00:27)

SupKurtJ

Member

Registered: 2015-07-18

Posts: 46

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

i have same problem with 'asus tuf gaming b450m pro s,  ryzen 7 3700x'. boot showing "no irq handler for vector" message for 9-10 times. i'm using kernel 5.10rc5. i'm using last bios of my motherboard. i'm using bios Version 2409.
pls focus. my bios agesa is combov2 1.1.8.0. newer than 1.1.0.0.c

i'm tried acpi=noirq. "no irq handler for vector" message is gone. but i have random reboots again.

So you can just disable IOMMU for now on the bios.

I've sent an email to AMD, and they did not reply me.

Are you sure it is the version 1.1.8.0 ? Because the last version is 1.1.0.0 D...

Last edited by SupKurtJ (2020-12-08 11:04:35)

toki1990

Member

Registered: 2019-11-03

Posts: 17

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

i have same problem with 'asus tuf gaming b450m pro s,  ryzen 7 3700x'. boot showing "no irq handler for vector" message for 9-10 times. i'm using kernel 5.10rc5. i'm using last bios of my motherboard. i'm using bios Version 2409.
pls focus. my bios agesa is combov2 1.1.8.0. newer than 1.1.0.0.c

i'm tried acpi=noirq. "no irq handler for vector" message is gone. but i have random reboots again.

So you can just disable IOMMU for now on the bios.

I've sent an email to AMD, and they did not reply me.

Are you sure it is the version 1.1.8.0 ? Because the last version is 1.1.0.0 D...

i tried IOMMU. not solution.

screenshot of my uefi screen:

https://ibb.co/GVLZ1xG

SupKurtJ

Member

Registered: 2015-07-18

Posts: 46

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

i have same problem with 'asus tuf gaming b450m pro s,  ryzen 7 3700x'. boot showing "no irq handler for vector" message for 9-10 times. i'm using kernel 5.10rc5. i'm using last bios of my motherboard. i'm using bios Version 2409.
pls focus. my bios agesa is combov2 1.1.8.0. newer than 1.1.0.0.c

i'm tried acpi=noirq. "no irq handler for vector" message is gone. but i have random reboots again.

So you can just disable IOMMU for now on the bios.

I've sent an email to AMD, and they did not reply me.

Are you sure it is the version 1.1.8.0 ? Because the last version is 1.1.0.0 D...

i tried IOMMU. not solution.

screenshot of my uefi screen:

https://ibb.co/GVLZ1xG

Your screenshot doesn't work...