You are not logged in.

Pages: 1

#1 2020-11-17 13:25:55

darkx97
Member
Registered: 2020-11-17
Posts: 34

[Solved] sccond monitor not working

i installed arch 2 days ago and noticed every time my system boot into arch
i can see  error says 

  FAILED to start Load/Save #ness of backlight:acpi_video0

also when i run xrandr i saw it dosen't detect my screen

[sufian@sufian-pc ~]$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
DisplayPort-1 disconnected (normal left inverted right x axis y axis)
 [b]this here is my second screen [/b]    HDMI-A-0 disconnected (normal left inverted right x axis y axis)
HDMI-A-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm
   1920x1080     60.00*+  74.97    50.00    59.94  
   1680x1050     59.88  
   1280x1024     75.02    60.02  
   1440x900      59.90  
   1280x800      60.00  
   1152x864      75.00  
   1280x720      60.00    50.00    59.94  
   1024x768      75.03    70.07    60.00  
   800x600       72.19    75.00    60.32  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       75.00    72.81    60.00    59.94  
   720x400       70.08  
DVI-D-0 disconnected (normal left inverted right x axis y axis)

and then my second screen stop giving out put ,i never used linux before i started using it like 2days before making this topic
look for solutions and found this post

i tried editing :

 GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3 quiet"

in 

 /etc/default/grub

  to 

 GRUB_CMDLINE_LINUX_DEFAULT="quiet acpi_osi=Linux acpi_backlight=vendor"

then i did 

 update-grub

and restarted my computer

did not  get the error , but still did not get any output from my second monitor
when i run xrandr i saw it dosen't detect my screen.

also if unplug the primary monitor and plug it in defferent port it still dosent detect it

sry for the bad english

Last edited by darkx97 (2020-11-22 23:33:29)

Offline

#2 2020-11-17 14:48:51

Chop1n
Member
Registered: 2020-10-20
Posts: 22

Re: [Solved] sccond monitor not working

I'm not sure I understood correctly, but does the monitor still not work if you plug it into the same port that you used for the primary.

Also just to be sure run 

 sudo pacman -Syu

and restart

If that doesn't do it run 

 lspci -nn | grep '\[03'

and post result


You said "and then my second screen stop giving out put", did the monitor ever work on this install?

And the error has to do with the backlight of the monitor I don't think it'd have anything to do with your monitor being detected or not.

"curl -F 'sprunge=<-' http://sprunge.us < path-to-file" is holy

Offline

#3 2020-11-17 16:31:56

darkx97
Member
Registered: 2020-11-17
Posts: 34

Re: [Solved] sccond monitor not working

i tried 

sudo pacman -Syu

and restarted still didnt get any output

the screen give me output when i power up my system , in the bios menu and it keeps working when i chose what "system" i want to boot into - arch linux is the only one i have - gives me 2 lines of information one of them has to do with booting or reading somethin on 

 /dev/sda2

but it couldnt read all of that code cuz it gose away quickly

once it gives me this information i see my log in manager on my primary monitor and my second one stops working

this is the out put i got 

 [sufian@sufian-pc ~]$ lspci -nn | grep '\[03'
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] [1002:67df] (rev e7)

my GPU is radeon rx580

Last edited by darkx97 (2020-11-17 16:35:35)

Offline

#4 2020-11-17 16:53:53

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,095

Re: [Solved] sccond monitor not working

Please post your xorg log, https://wiki.archlinux.org/index.php/Xorg#General

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#5 2020-11-17 20:20:23

darkx97
Member
Registered: 2020-11-17
Posts: 34

Re: [Solved] sccond monitor not working

aaam i tried to read through the whole wiki artical
and not sure if you wanted me to get more information but thats the what i got from the log 

 
[sufian@sufian-pc log]$ grep -e Log -e tty Xorg.0.log
[     5.356] (--) Log file renamed from "/var/log/Xorg.pid-410.log" to "/var/log/Xorg.0.log"
[     5.359] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 17 21:31:51 2020
[     5.368] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration


[sufian@sufian-pc log]$ grep -e Log -e tty Xorg.1.log
[  2500.072] (--) Log file renamed from "/var/log/Xorg.pid-38249.log" to "/var/log/Xorg.1.log"
[  2500.072] (==) Log file: "/var/log/Xorg.1.log", Time: Tue Nov 17 00:01:49 2020
[  2500.073] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration

Last edited by darkx97 (2020-11-17 20:20:54)

Offline

#6 2020-11-17 21:43:46

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,095

Re: [Solved] sccond monitor not working

I want you to post the entire Xorg.0.log, the link only explained where to find it (depending on your setup)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#7 2020-11-17 22:30:18

Chop1n
Member
Registered: 2020-10-20
Posts: 22

Re: [Solved] sccond monitor not working

darkx97 wrote:

aaam i tried to read through the whole wiki artical
and not sure if you wanted me to get more information but thats the what i got from the log 

 
[sufian@sufian-pc log]$ grep -e Log -e tty Xorg.0.log
[     5.356] (--) Log file renamed from "/var/log/Xorg.pid-410.log" to "/var/log/Xorg.0.log"
[     5.359] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 17 21:31:51 2020
[     5.368] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration


[sufian@sufian-pc log]$ grep -e Log -e tty Xorg.1.log
[  2500.072] (--) Log file renamed from "/var/log/Xorg.pid-38249.log" to "/var/log/Xorg.1.log"
[  2500.072] (==) Log file: "/var/log/Xorg.1.log", Time: Tue Nov 17 00:01:49 2020
[  2500.073] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration

Copy the contents of "/var/log/Xorg.0.log" and post them

One way to do it is 

 cat /var/log/Xorg.0.log| curl -F 'sprunge=<-' http://sprunge.us

and send the output link

Last edited by Chop1n (2020-11-17 22:49:33)

"curl -F 'sprunge=<-' http://sprunge.us < path-to-file" is holy

Offline

#8 2020-11-17 22:35:34

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,095

Re: [Solved] sccond monitor not working

@Chop1n, actual pastebin.com is discouraged and there're easier ways anyway. See https://wiki.archlinux.org/index.php/Pastebin

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#9 2020-11-17 22:44:19

Chop1n
Member
Registered: 2020-10-20
Posts: 22

Re: [Solved] sccond monitor not working

@seth My mistake! Thank you!

"curl -F 'sprunge=<-' http://sprunge.us < path-to-file" is holy

Offline

#10 2020-11-18 09:00:45

darkx97
Member
Registered: 2020-11-17
Posts: 34

Re: [Solved] sccond monitor not working

 [     5.736] (--) Log file renamed from "/var/log/Xorg.pid-398.log" to "/var/log/Xorg.0.log"
[     5.739] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[     5.739] Build Operating System: Linux Arch Linux
[     5.739] Current Operating System: Linux sufian-pc 5.9.8-arch1-1 #1 SMP PREEMPT Tue, 10 Nov 2020 22:44:11 +0000 x86_64
[     5.739] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9a532101-5cd9-403e-b756-e9e96a1a06bc rw loglevel=3 quiet
[     5.739] Build Date: 16 November 2020  12:26:46PM
[     5.739]  
[     5.739] Current version of pixman: 0.40.0
[     5.739] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.739] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.739] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 18 10:42:04 2020
[     5.743] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.743] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.744] (==) No Layout section.  Using the first Screen section.
[     5.744] (==) No screen section available. Using defaults.
[     5.744] (**) |-->Screen "Default Screen Section" (0)
[     5.744] (**) |   |-->Monitor "<default monitor>"
[     5.744] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[     5.744] (**) |   |-->Device "AMD"
[     5.744] (**) |   |-->GPUDevice "Radeon"
[     5.744] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.744] (==) Automatically adding devices
[     5.744] (==) Automatically enabling devices
[     5.744] (==) Automatically adding GPU devices
[     5.744] (==) Automatically binding GPU devices
[     5.744] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.746] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     5.746] 	Entry deleted from font path.
[     5.746] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     5.746] 	Entry deleted from font path.
[     5.746] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.746] 	Entry deleted from font path.
[     5.748] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[     5.748] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.748] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.748] (II) Module ABI versions:
[     5.748] 	X.Org ANSI C Emulation: 0.4
[     5.748] 	X.Org Video Driver: 24.1
[     5.748] 	X.Org XInput driver : 24.1
[     5.748] 	X.Org Server Extension : 10.0
[     5.749] (++) using VT number 1

[     5.749] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.749] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.749] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.1/0000:01:00.0/drm/card0
[     5.758] (--) PCI:*(1@0:0:0) 1002:67df:1462:3418 rev 231, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfcf00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[     5.758] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     5.758] (II) LoadModule: "glx"
[     5.758] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.769] (II) Module glx: vendor="X.Org Foundation"
[     5.769] 	compiled for 1.20.9, module version = 1.0.0
[     5.769] 	ABI class: X.Org Server Extension, version 10.0
[     5.769] (II) LoadModule: "amdgpu"
[     5.772] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[     5.776] (II) Module amdgpu: vendor="X.Org Foundation"
[     5.776] 	compiled for 1.20.8, module version = 19.1.0
[     5.776] 	Module class: X.Org Video Driver
[     5.776] 	ABI class: X.Org Video Driver, version 24.1
[     5.776] (II) LoadModule: "radeon"
[     5.776] (WW) Warning, couldn't open module radeon
[     5.776] (EE) Failed to load module "radeon" (module does not exist, 0)
[     5.776] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[     5.777] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[     5.777] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.777] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[     5.777] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     5.777] (==) AMDGPU(0): Default visual is TrueColor
[     5.777] (==) AMDGPU(0): RGB weight 888
[     5.777] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[     5.777] (--) AMDGPU(0): Chipset: "Radeon RX 580 Series" (ChipID = 0x67df)
[     5.777] (II) Loading sub module "fb"
[     5.777] (II) LoadModule: "fb"
[     5.777] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.778] (II) Module fb: vendor="X.Org Foundation"
[     5.778] 	compiled for 1.20.9, module version = 1.0.0
[     5.778] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.778] (II) Loading sub module "dri2"
[     5.778] (II) LoadModule: "dri2"
[     5.778] (II) Module "dri2" already built-in
[     6.047] (II) Loading sub module "glamoregl"
[     6.047] (II) LoadModule: "glamoregl"
[     6.047] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     6.055] (II) Module glamoregl: vendor="X.Org Foundation"
[     6.055] 	compiled for 1.20.9, module version = 1.0.1
[     6.055] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.080] (II) AMDGPU(0): glamor X acceleration enabled on Radeon RX 580 Series (POLARIS10, DRM 3.39.0, 5.9.8-arch1-1, LLVM 11.0.0)
[     6.080] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[     6.080] (==) AMDGPU(0): TearFree property default: auto
[     6.080] (==) AMDGPU(0): VariableRefresh: disabled
[     6.080] (II) AMDGPU(0): KMS Pageflipping: enabled
[     6.080] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[     6.080] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[     6.080] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[     6.080] (II) AMDGPU(0): Output HDMI-A-1 has no monitor section
[     6.080] (II) AMDGPU(0): Output DVI-D-0 has no monitor section
[     6.088] (II) AMDGPU(0): EDID for output DisplayPort-0
[     6.088] (II) AMDGPU(0): EDID for output DisplayPort-1
[     6.088] (II) AMDGPU(0): EDID for output HDMI-A-0
[     6.089] (II) AMDGPU(0): EDID for output HDMI-A-1
[     6.089] (II) AMDGPU(0): Manufacturer: LEN  Model: 61c7  Serial#: 16843009
[     6.089] (II) AMDGPU(0): Year: 2019  Week: 41
[     6.089] (II) AMDGPU(0): EDID Version: 1.3
[     6.089] (II) AMDGPU(0): Digital Display Input
[     6.089] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 60  vert.: 34
[     6.089] (II) AMDGPU(0): Gamma: 2.20
[     6.089] (II) AMDGPU(0): DPMS capabilities: Off
[     6.089] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     6.089] (II) AMDGPU(0): Default color space is primary color space
[     6.089] (II) AMDGPU(0): First detailed timing is preferred mode
[     6.089] (II) AMDGPU(0): redX: 0.639 redY: 0.339   greenX: 0.314 greenY: 0.622
[     6.089] (II) AMDGPU(0): blueX: 0.150 blueY: 0.057   whiteX: 0.313 whiteY: 0.329
[     6.089] (II) AMDGPU(0): Supported established timings:
[     6.089] (II) AMDGPU(0): 720x400@70Hz
[     6.089] (II) AMDGPU(0): 640x480@60Hz
[     6.089] (II) AMDGPU(0): 640x480@72Hz
[     6.089] (II) AMDGPU(0): 640x480@75Hz
[     6.089] (II) AMDGPU(0): 800x600@60Hz
[     6.089] (II) AMDGPU(0): 800x600@72Hz
[     6.089] (II) AMDGPU(0): 800x600@75Hz
[     6.089] (II) AMDGPU(0): 1024x768@60Hz
[     6.089] (II) AMDGPU(0): 1024x768@70Hz
[     6.089] (II) AMDGPU(0): 1024x768@75Hz
[     6.089] (II) AMDGPU(0): 1280x1024@75Hz
[     6.089] (II) AMDGPU(0): Manufacturer's mask: 0
[     6.089] (II) AMDGPU(0): Supported standard timings:
[     6.089] (II) AMDGPU(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[     6.089] (II) AMDGPU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     6.089] (II) AMDGPU(0): #2: hsize: 1280  vsize 1024  refresh: 70  vid: 35457
[     6.089] (II) AMDGPU(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[     6.089] (II) AMDGPU(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[     6.089] (II) AMDGPU(0): #5: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     6.089] (II) AMDGPU(0): Supported detailed timing:
[     6.089] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  598 x 336 mm
[     6.089] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[     6.089] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[     6.089] (II) AMDGPU(0): Supported detailed timing:
[     6.089] (II) AMDGPU(0): clock: 174.5 MHz   Image Size:  598 x 336 mm
[     6.089] (II) AMDGPU(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[     6.089] (II) AMDGPU(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1119 v_border: 0
[     6.089] (II) AMDGPU(0): Ranges: V min: 49 V max: 76 Hz, H min: 54 H max: 90 kHz, PixClock max 215 MHz
[     6.089] (II) AMDGPU(0): Monitor name: LEN S27i-10
[     6.089] (II) AMDGPU(0): Supported detailed timing:
[     6.089] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  598 x 336 mm
[     6.089] (II) AMDGPU(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[     6.089] (II) AMDGPU(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[     6.089] (II) AMDGPU(0): Supported detailed timing:
[     6.089] (II) AMDGPU(0): clock: 27.0 MHz   Image Size:  598 x 336 mm
[     6.089] (II) AMDGPU(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[     6.089] (II) AMDGPU(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[     6.089] (II) AMDGPU(0): Supported detailed timing:
[     6.089] (II) AMDGPU(0): clock: 27.0 MHz   Image Size:  598 x 336 mm
[     6.089] (II) AMDGPU(0): h_active: 720  h_sync: 732  h_sync_end 796 h_blank_end 864 h_border: 0
[     6.089] (II) AMDGPU(0): v_active: 576  v_sync: 581  v_sync_end 586 v_blanking: 625 v_border: 0
[     6.089] (II) AMDGPU(0): Number of EDID sections to follow: 1
[     6.089] (II) AMDGPU(0): EDID (in hex):
[     6.089] (II) AMDGPU(0): 	00ffffffffffff0030aec76101010101
[     6.089] (II) AMDGPU(0): 	291d0103803c22782eb9a5a356509f26
[     6.089] (II) AMDGPU(0): 	0e5054adcf00d1c08180818a9500b300
[     6.089] (II) AMDGPU(0): 	714f01010101023a801871382d40582c
[     6.089] (II) AMDGPU(0): 	450056502100001e2a4480a070382740
[     6.089] (II) AMDGPU(0): 	3020350056502100001a000000fd0031
[     6.089] (II) AMDGPU(0): 	4c365a15000a202020202020000000fc
[     6.089] (II) AMDGPU(0): 	004c454e20533237692d31300a20018e
[     6.089] (II) AMDGPU(0): 	020327f14b010203040514111213101f
[     6.089] (II) AMDGPU(0): 	230907078301000065030c001000681a
[     6.089] (II) AMDGPU(0): 	00000101304c00011d007251d01e206e
[     6.089] (II) AMDGPU(0): 	28550056502100001e8c0ad08a20e02d
[     6.089] (II) AMDGPU(0): 	10103e96005650210000188c0ad09020
[     6.089] (II) AMDGPU(0): 	4031200c405500565021000018000000
[     6.089] (II) AMDGPU(0): 	00000000000000000000000000000000
[     6.089] (II) AMDGPU(0): 	000000000000000000000000000000f8
[     6.089] (II) AMDGPU(0): Printing probed modes for output HDMI-A-1
[     6.089] (II) AMDGPU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[     6.089] (II) AMDGPU(0): Modeline "1920x1080"x75.0  174.50  1920 1968 2000 2080  1080 1083 1088 1119 +hsync -vsync (83.9 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1280x800"x60.0  148.50  1280 2008 2052 2200  800 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     6.089] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     6.089] (II) AMDGPU(0): EDID for output DVI-D-0
[     6.089] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[     6.089] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[     6.089] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[     6.089] (II) AMDGPU(0): Output HDMI-A-1 connected
[     6.089] (II) AMDGPU(0): Output DVI-D-0 disconnected
[     6.089] (II) AMDGPU(0): Using exact sizes for initial modes
[     6.089] (II) AMDGPU(0): Output HDMI-A-1 using initial mode 1920x1080 +0+0
[     6.089] (II) AMDGPU(0): mem size init: gart size :1ff86f000 vram size: s:1feea6000 visible:f2e7000
[     6.089] (==) AMDGPU(0): DPI set to (96, 96)
[     6.089] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.089] (II) Loading sub module "ramdac"
[     6.089] (II) LoadModule: "ramdac"
[     6.089] (II) Module "ramdac" already built-in
[     6.090] (II) AMDGPU(0): [DRI2] Setup complete
[     6.090] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[     6.090] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[     6.090] (II) AMDGPU(0): Front buffer pitch: 8192 bytes
[     6.092] (II) AMDGPU(0): SYNC extension fences enabled
[     6.092] (II) AMDGPU(0): Present extension enabled
[     6.092] (==) AMDGPU(0): DRI3 enabled
[     6.092] (==) AMDGPU(0): Backing store enabled
[     6.092] (II) AMDGPU(0): Direct rendering enabled
[     6.127] (II) AMDGPU(0): Use GLAMOR acceleration.
[     6.127] (II) AMDGPU(0): Acceleration enabled
[     6.127] (==) AMDGPU(0): DPMS enabled
[     6.127] (==) AMDGPU(0): Silken mouse disabled
[     6.127] (II) AMDGPU(0): Set up textured video (glamor)
[     6.139] (II) Initializing extension Generic Event Extension
[     6.139] (II) Initializing extension SHAPE
[     6.139] (II) Initializing extension MIT-SHM
[     6.139] (II) Initializing extension XInputExtension
[     6.139] (II) Initializing extension XTEST
[     6.140] (II) Initializing extension BIG-REQUESTS
[     6.140] (II) Initializing extension SYNC
[     6.140] (II) Initializing extension XKEYBOARD
[     6.140] (II) Initializing extension XC-MISC
[     6.141] (II) Initializing extension SECURITY
[     6.141] (II) Initializing extension XFIXES
[     6.141] (II) Initializing extension RENDER
[     6.141] (II) Initializing extension RANDR
[     6.141] (II) Initializing extension COMPOSITE
[     6.141] (II) Initializing extension DAMAGE
[     6.141] (II) Initializing extension MIT-SCREEN-SAVER
[     6.141] (II) Initializing extension DOUBLE-BUFFER
[     6.141] (II) Initializing extension RECORD
[     6.142] (II) Initializing extension DPMS
[     6.142] (II) Initializing extension Present
[     6.142] (II) Initializing extension DRI3
[     6.142] (II) Initializing extension X-Resource
[     6.142] (II) Initializing extension XVideo
[     6.142] (II) Initializing extension XVideo-MotionCompensation
[     6.142] (II) Initializing extension GLX
[     6.151] (II) AIGLX: Loaded and initialized radeonsi
[     6.151] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.151] (II) Initializing extension XFree86-VidModeExtension
[     6.152] (II) Initializing extension XFree86-DGA
[     6.152] (II) Initializing extension XFree86-DRI
[     6.152] (II) Initializing extension DRI2
[     6.166] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[     6.344] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     6.344] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.344] (II) LoadModule: "libinput"
[     6.344] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.351] (II) Module libinput: vendor="X.Org Foundation"
[     6.351] 	compiled for 1.20.8, module version = 0.30.0
[     6.351] 	Module class: X.Org XInput Driver
[     6.351] 	ABI class: X.Org XInput driver, version 24.1
[     6.351] (II) Using input driver 'libinput' for 'Power Button'
[     6.351] (**) Power Button: always reports core events
[     6.351] (**) Option "Device" "/dev/input/event1"
[     6.351] (**) Option "_source" "server/udev"
[     6.357] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.357] (II) event1  - Power Button: device is a keyboard
[     6.357] (II) event1  - Power Button: device removed
[     6.380] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     6.380] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.380] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.380] (II) event1  - Power Button: device is a keyboard
[     6.381] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[     6.381] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.381] (II) Using input driver 'libinput' for 'Video Bus'
[     6.381] (**) Video Bus: always reports core events
[     6.381] (**) Option "Device" "/dev/input/event2"
[     6.381] (**) Option "_source" "server/udev"
[     6.382] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[     6.382] (II) event2  - Video Bus: device is a keyboard
[     6.382] (II) event2  - Video Bus: device removed
[     6.440] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input2/event2"
[     6.440] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.442] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[     6.442] (II) event2  - Video Bus: device is a keyboard
[     6.443] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     6.443] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.443] (II) Using input driver 'libinput' for 'Power Button'
[     6.443] (**) Power Button: always reports core events
[     6.443] (**) Option "Device" "/dev/input/event0"
[     6.443] (**) Option "_source" "server/udev"
[     6.444] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     6.445] (II) event0  - Power Button: device is a keyboard
[     6.445] (II) event0  - Power Button: device removed
[     6.480] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     6.480] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     6.481] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     6.481] (II) event0  - Power Button: device is a keyboard
[     6.483] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event10)
[     6.483] (II) No input driver specified, ignoring this device.
[     6.483] (II) This device may have been added with another device file.
[     6.483] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5)
[     6.483] (II) No input driver specified, ignoring this device.
[     6.483] (II) This device may have been added with another device file.
[     6.484] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event6)
[     6.484] (II) No input driver specified, ignoring this device.
[     6.484] (II) This device may have been added with another device file.
[     6.484] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event7)
[     6.484] (II) No input driver specified, ignoring this device.
[     6.484] (II) This device may have been added with another device file.
[     6.485] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event8)
[     6.485] (II) No input driver specified, ignoring this device.
[     6.485] (II) This device may have been added with another device file.
[     6.486] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event9)
[     6.486] (II) No input driver specified, ignoring this device.
[     6.486] (II) This device may have been added with another device file.
[     6.487] (II) config/udev: Adding input device SONiX USB DEVICE (/dev/input/event11)
[     6.487] (**) SONiX USB DEVICE: Applying InputClass "libinput keyboard catchall"
[     6.487] (II) Using input driver 'libinput' for 'SONiX USB DEVICE'
[     6.487] (**) SONiX USB DEVICE: always reports core events
[     6.487] (**) Option "Device" "/dev/input/event11"
[     6.487] (**) Option "_source" "server/udev"
[     6.489] (II) event11 - SONiX USB DEVICE: is tagged by udev as: Keyboard
[     6.489] (II) event11 - SONiX USB DEVICE: device is a keyboard
[     6.490] (II) event11 - SONiX USB DEVICE: device removed
[     6.520] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:09:00.3/usb3/3-3/3-3:1.0/0003:0C45:5204.0001/input/input16/event11"
[     6.520] (II) XINPUT: Adding extended input device "SONiX USB DEVICE" (type: KEYBOARD, id 9)
[     6.522] (II) event11 - SONiX USB DEVICE: is tagged by udev as: Keyboard
[     6.523] (II) event11 - SONiX USB DEVICE: device is a keyboard
[     6.524] (II) config/udev: Adding input device SONiX USB DEVICE Keyboard (/dev/input/event17)
[     6.524] (**) SONiX USB DEVICE Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.524] (II) Using input driver 'libinput' for 'SONiX USB DEVICE Keyboard'
[     6.524] (**) SONiX USB DEVICE Keyboard: always reports core events
[     6.524] (**) Option "Device" "/dev/input/event17"
[     6.524] (**) Option "_source" "server/udev"
[     6.527] (II) event17 - SONiX USB DEVICE Keyboard: is tagged by udev as: Keyboard
[     6.527] (II) event17 - SONiX USB DEVICE Keyboard: device is a keyboard
[     6.527] (II) event17 - SONiX USB DEVICE Keyboard: device removed
[     6.546] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:09:00.3/usb3/3-3/3-3:1.1/0003:0C45:5204.0002/input/input17/event17"
[     6.546] (II) XINPUT: Adding extended input device "SONiX USB DEVICE Keyboard" (type: KEYBOARD, id 10)
[     6.549] (II) event17 - SONiX USB DEVICE Keyboard: is tagged by udev as: Keyboard
[     6.549] (II) event17 - SONiX USB DEVICE Keyboard: device is a keyboard
[     6.551] (II) config/udev: Adding input device SONiX USB DEVICE System Control (/dev/input/event18)
[     6.551] (**) SONiX USB DEVICE System Control: Applying InputClass "libinput keyboard catchall"
[     6.551] (II) Using input driver 'libinput' for 'SONiX USB DEVICE System Control'
[     6.551] (**) SONiX USB DEVICE System Control: always reports core events
[     6.551] (**) Option "Device" "/dev/input/event18"
[     6.551] (**) Option "_source" "server/udev"
[     6.553] (II) event18 - SONiX USB DEVICE System Control: is tagged by udev as: Keyboard
[     6.554] (II) event18 - SONiX USB DEVICE System Control: device is a keyboard
[     6.554] (II) event18 - SONiX USB DEVICE System Control: device removed
[     6.586] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:09:00.3/usb3/3-3/3-3:1.1/0003:0C45:5204.0002/input/input18/event18"
[     6.586] (II) XINPUT: Adding extended input device "SONiX USB DEVICE System Control" (type: KEYBOARD, id 11)
[     6.589] (II) event18 - SONiX USB DEVICE System Control: is tagged by udev as: Keyboard
[     6.589] (II) event18 - SONiX USB DEVICE System Control: device is a keyboard
[     6.591] (II) config/udev: Adding input device SONiX USB DEVICE Consumer Control (/dev/input/event19)
[     6.591] (**) SONiX USB DEVICE Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.591] (II) Using input driver 'libinput' for 'SONiX USB DEVICE Consumer Control'
[     6.591] (**) SONiX USB DEVICE Consumer Control: always reports core events
[     6.591] (**) Option "Device" "/dev/input/event19"
[     6.591] (**) Option "_source" "server/udev"
[     6.594] (II) event19 - SONiX USB DEVICE Consumer Control: is tagged by udev as: Keyboard
[     6.594] (II) event19 - SONiX USB DEVICE Consumer Control: device is a keyboard
[     6.594] (II) event19 - SONiX USB DEVICE Consumer Control: device removed
[     6.613] (II) libinput: SONiX USB DEVICE Consumer Control: needs a virtual subdevice
[     6.613] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:09:00.3/usb3/3-3/3-3:1.1/0003:0C45:5204.0002/input/input19/event19"
[     6.613] (II) XINPUT: Adding extended input device "SONiX USB DEVICE Consumer Control" (type: MOUSE, id 12)
[     6.613] (**) Option "AccelerationScheme" "none"
[     6.613] (**) SONiX USB DEVICE Consumer Control: (accel) selected scheme none/0
[     6.613] (**) SONiX USB DEVICE Consumer Control: (accel) acceleration factor: 2.000
[     6.613] (**) SONiX USB DEVICE Consumer Control: (accel) acceleration threshold: 4
[     6.616] (II) event19 - SONiX USB DEVICE Consumer Control: is tagged by udev as: Keyboard
[     6.616] (II) event19 - SONiX USB DEVICE Consumer Control: device is a keyboard
[     6.617] (II) config/udev: Adding input device SONiX USB DEVICE (/dev/input/event20)
[     6.617] (II) No input driver specified, ignoring this device.
[     6.617] (II) This device may have been added with another device file.
[     6.619] (II) config/udev: Adding input device Gaming Mouse (/dev/input/event21)
[     6.619] (**) Gaming Mouse: Applying InputClass "libinput pointer catchall"
[     6.619] (II) Using input driver 'libinput' for 'Gaming Mouse'
[     6.619] (**) Gaming Mouse: always reports core events
[     6.619] (**) Option "Device" "/dev/input/event21"
[     6.619] (**) Option "_source" "server/udev"
[     6.676] (II) event21 - Gaming Mouse: is tagged by udev as: Mouse
[     6.676] (II) event21 - Gaming Mouse: device is a pointer
[     6.676] (II) event21 - Gaming Mouse: device removed
[     6.746] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:09:00.4/usb5/5-1/5-1.2/5-1.2:1.0/0003:093A:2533.0003/input/input21/event21"
[     6.746] (II) XINPUT: Adding extended input device "Gaming Mouse" (type: MOUSE, id 13)
[     6.747] (**) Option "AccelerationScheme" "none"
[     6.747] (**) Gaming Mouse: (accel) selected scheme none/0
[     6.747] (**) Gaming Mouse: (accel) acceleration factor: 2.000
[     6.747] (**) Gaming Mouse: (accel) acceleration threshold: 4
[     6.805] (II) event21 - Gaming Mouse: is tagged by udev as: Mouse
[     6.806] (II) event21 - Gaming Mouse: device is a pointer
[     6.807] (II) config/udev: Adding input device Gaming Mouse (/dev/input/mouse0)
[     6.807] (II) No input driver specified, ignoring this device.
[     6.807] (II) This device may have been added with another device file.
[     6.808] (II) config/udev: Adding input device Gaming Mouse Keyboard (/dev/input/event22)
[     6.808] (**) Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.808] (II) Using input driver 'libinput' for 'Gaming Mouse Keyboard'
[     6.808] (**) Gaming Mouse Keyboard: always reports core events
[     6.808] (**) Option "Device" "/dev/input/event22"
[     6.808] (**) Option "_source" "server/udev"
[     6.810] (II) event22 - Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[     6.810] (II) event22 - Gaming Mouse Keyboard: device is a keyboard
[     6.810] (II) event22 - Gaming Mouse Keyboard: device removed
[     6.826] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:09:00.4/usb5/5-1/5-1.2/5-1.2:1.1/0003:093A:2533.0004/input/input23/event22"
[     6.826] (II) XINPUT: Adding extended input device "Gaming Mouse Keyboard" (type: KEYBOARD, id 14)
[     6.828] (II) event22 - Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[     6.828] (II) event22 - Gaming Mouse Keyboard: device is a keyboard
[     6.829] (II) config/udev: Adding input device Gaming Mouse Consumer Control (/dev/input/event23)
[     6.829] (**) Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.829] (II) Using input driver 'libinput' for 'Gaming Mouse Consumer Control'
[     6.829] (**) Gaming Mouse Consumer Control: always reports core events
[     6.829] (**) Option "Device" "/dev/input/event23"
[     6.829] (**) Option "_source" "server/udev"
[     6.830] (II) event23 - Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[     6.831] (II) event23 - Gaming Mouse Consumer Control: device is a keyboard
[     6.831] (II) event23 - Gaming Mouse Consumer Control: device removed
[     6.846] (II) libinput: Gaming Mouse Consumer Control: needs a virtual subdevice
[     6.847] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:09:00.4/usb5/5-1/5-1.2/5-1.2:1.1/0003:093A:2533.0004/input/input24/event23"
[     6.847] (II) XINPUT: Adding extended input device "Gaming Mouse Consumer Control" (type: MOUSE, id 15)
[     6.847] (**) Option "AccelerationScheme" "none"
[     6.847] (**) Gaming Mouse Consumer Control: (accel) selected scheme none/0
[     6.847] (**) Gaming Mouse Consumer Control: (accel) acceleration factor: 2.000
[     6.847] (**) Gaming Mouse Consumer Control: (accel) acceleration threshold: 4
[     6.849] (II) event23 - Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[     6.849] (II) event23 - Gaming Mouse Consumer Control: device is a keyboard
[     6.849] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event12)
[     6.849] (II) No input driver specified, ignoring this device.
[     6.849] (II) This device may have been added with another device file.
[     6.850] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event13)
[     6.850] (II) No input driver specified, ignoring this device.
[     6.850] (II) This device may have been added with another device file.
[     6.850] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event14)
[     6.850] (II) No input driver specified, ignoring this device.
[     6.850] (II) This device may have been added with another device file.
[     6.850] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event15)
[     6.850] (II) No input driver specified, ignoring this device.
[     6.850] (II) This device may have been added with another device file.
[     6.850] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event16)
[     6.850] (II) No input driver specified, ignoring this device.
[     6.850] (II) This device may have been added with another device file.
[     6.851] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[     6.851] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     6.851] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[     6.851] (**) Eee PC WMI hotkeys: always reports core events
[     6.851] (**) Option "Device" "/dev/input/event4"
[     6.851] (**) Option "_source" "server/udev"
[     6.851] (II) event4  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[     6.851] (II) event4  - Eee PC WMI hotkeys: device is a keyboard
[     6.852] (II) event4  - Eee PC WMI hotkeys: device removed
[     6.887] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input4/event4"
[     6.887] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 16)
[     6.888] (II) event4  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[     6.888] (II) event4  - Eee PC WMI hotkeys: device is a keyboard
[     6.888] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[     6.888] (II) No input driver specified, ignoring this device.
[     6.888] (II) This device may have been added with another device file.
[     6.892] (**) SONiX USB DEVICE Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.892] (II) Using input driver 'libinput' for 'SONiX USB DEVICE Consumer Control'
[     6.892] (**) SONiX USB DEVICE Consumer Control: always reports core events
[     6.892] (**) Option "Device" "/dev/input/event19"
[     6.892] (**) Option "_source" "_driver/libinput"
[     6.892] (II) libinput: SONiX USB DEVICE Consumer Control: is a virtual subdevice
[     6.892] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:09:00.3/usb3/3-3/3-3:1.1/0003:0C45:5204.0002/input/input19/event19"
[     6.892] (II) XINPUT: Adding extended input device "SONiX USB DEVICE Consumer Control" (type: KEYBOARD, id 17)
[     6.892] (**) Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.892] (II) Using input driver 'libinput' for 'Gaming Mouse Consumer Control'
[     6.892] (**) Gaming Mouse Consumer Control: always reports core events
[     6.892] (**) Option "Device" "/dev/input/event23"
[     6.892] (**) Option "_source" "_driver/libinput"
[     6.892] (II) libinput: Gaming Mouse Consumer Control: is a virtual subdevice
[     6.892] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:09:00.4/usb5/5-1/5-1.2/5-1.2:1.1/0003:093A:2533.0004/input/input24/event23"
[     6.892] (II) XINPUT: Adding extended input device "Gaming Mouse Consumer Control" (type: KEYBOARD, id 18)
[   476.021] (II) AMDGPU(0): EDID vendor "LEN", prod id 25031
[   476.021] (II) AMDGPU(0): Using EDID range info for horizontal sync
[   476.021] (II) AMDGPU(0): Using EDID range info for vertical refresh
[   476.021] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   476.021] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   476.021] (II) AMDGPU(0): Modeline "1920x1080"x0.0  174.50  1920 1968 2000 2080  1080 1083 1088 1119 +hsync -vsync (83.9 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1280x1024"x70.0  128.94  1280 1368 1504 1728  1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   476.021] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   476.982] (II) AMDGPU(0): EDID vendor "LEN", prod id 25031
[   476.982] (II) AMDGPU(0): Using hsync ranges from config file
[   476.982] (II) AMDGPU(0): Using vrefresh ranges from config file
[   476.982] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   476.982] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   476.982] (II) AMDGPU(0): Modeline "1920x1080"x0.0  174.50  1920 1968 2000 2080  1080 1083 1088 1119 +hsync -vsync (83.9 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1280x1024"x70.0  128.94  1280 1368 1504 1728  1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   476.982] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   483.607] (II) AMDGPU(0): EDID vendor "LEN", prod id 25031
[   483.607] (II) AMDGPU(0): Using hsync ranges from config file
[   483.607] (II) AMDGPU(0): Using vrefresh ranges from config file
[   483.607] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   483.607] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   483.607] (II) AMDGPU(0): Modeline "1920x1080"x0.0  174.50  1920 1968 2000 2080  1080 1083 1088 1119 +hsync -vsync (83.9 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1280x1024"x70.0  128.94  1280 1368 1504 1728  1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   483.607] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   490.994] (II) AMDGPU(0): EDID vendor "LEN", prod id 25031
[   490.994] (II) AMDGPU(0): Using hsync ranges from config file
[   490.994] (II) AMDGPU(0): Using vrefresh ranges from config file
[   490.994] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   490.994] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   490.994] (II) AMDGPU(0): Modeline "1920x1080"x0.0  174.50  1920 1968 2000 2080  1080 1083 1088 1119 +hsync -vsync (83.9 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1280x1024"x70.0  128.94  1280 1368 1504 1728  1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   490.994] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

sry it toke me long time to realize what i'm suppose to do

Last edited by darkx97 (2020-11-18 09:01:50)

Offline

#11 2020-11-18 12:11:02

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,095

Re: [Solved] sccond monitor not working

Single GPU system and the 2nd HDMI output is never available to X11.

then my second screen stop giving out put

When exactly does this happen and do you have a second output when only booting the multi-user.target (see the 2nd link in my signature) or at least at the bootloader (grub)?

I'd say that the monitor powers off and unregisters when it doesn't get a signal during the boot, but it should then re-appear when re-plugging it.
Still see https://raw.githubusercontent.com/torva … modedb.rst and try

video=HDMI-A-0:e video=HDMI-A-1:e

Edit: possible duct-tape "solution", https://forum.kodi.tv/showthread.php?tid=224196 - but let's first clarify when and how the problem manifests.

Last edited by seth (2020-11-18 12:12:54)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#12 2020-11-18 14:25:14

darkx97
Member
Registered: 2020-11-17
Posts: 34

Re: [Solved] sccond monitor not working

still in the process of reading the artical but just to give quick response to when the problem happens

i see the boot menu on both my monitors i do see the error of handling brightness then my monitor tells me that there is no signal
when i get to my login on my first  monitor .

Offline

#13 2020-11-18 14:30:34

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,095

Re: [Solved] sccond monitor not working

I don't think it's backlight related, ensure to also remove the "quiet" parameter from the commandline.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#14 2020-11-18 15:24:08

darkx97
Member
Registered: 2020-11-17
Posts: 34

Re: [Solved] sccond monitor not working

about the 

video=HDMI-A-0:e video=HDMI-A-1:e

so im still not sure where to edit those settings im assuming its i can find in the xorg or grub wiki correct ?
or is it just a command that i excute on my terminal

Offline

#15 2020-11-18 15:33:41

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,095

Re: [Solved] sccond monitor not working

The kernel commandline, you can eg. edit itby selecting the kernel entry in the bootloader and pressing "e" (or updating GRUB_CMDLINE_LINUX_DEFAULT, don't forget to recreate the grub config)
The "quiet" parameter is likewise (just remove it)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#16 2020-11-18 18:00:26

darkx97
Member
Registered: 2020-11-17
Posts: 34

Re: [Solved] sccond monitor not working

now im getting defferent 

[Failed] faild to start load/save screen backlight brightness of of backlight:apci_video0
see 'systemctl status systemd-backlight:acpi_video0.service' for details

and i did that 

 
[sufian@sufian-pc ~]$ systemctl status systemd-backlight@backlight:acpi_video0.service
* systemd-backlight@backlight:acpi_video0.service - Load/Save Screen Backlight Brightness of backlight:acpi_video0
     Loaded: loaded (/usr/lib/systemd/system/systemd-backlight@.service; static)
     Active: failed (Result: exit-code) since Wed 2020-11-18 19:51:14 EET; 3min 0s ago
       Docs: man:systemd-backlight@.service(8)
    Process: 395 ExecStart=/usr/lib/systemd/systemd-backlight load backlight:acpi_video0 (code=exited, status=1/FAILURE)
   Main PID: 395 (code=exited, status=1/FAILURE)

Nov 18 19:51:14 sufian-pc systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:acpi_video0...
Nov 18 19:51:14 sufian-pc systemd-backlight[395]: Failed to get backlight or LED device 'backlight:acpi_video0': No such device
Nov 18 19:51:14 sufian-pc systemd[1]: systemd-backlight@backlight:acpi_video0.service: Main process exited, code=exited, status=1/FAILURE
Nov 18 19:51:14 sufian-pc systemd[1]: systemd-backlight@backlight:acpi_video0.service: Failed with result 'exit-code'.
Nov 18 19:51:14 sufian-pc systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0.

and then i looked the _PID thing 


[sufian@sufian-pc ~]$ journalctl -b _PID=395
-- Logs begin at Sun 2020-11-15 23:47:27 EET, end at Wed 2020-11-18 19:56:41 EET. --
Nov 18 19:51:14 sufian-pc systemd-backlight[395]: Failed to get backlight or LED device 'backlight:acpi_video0': No such device

so it seems like it dosenot even see my monitor once it gets to that point


---- EDITED -----


so could it be the blug thing that im using

technically my screen it self dosent have a cable to connect HDMI to a VGA port , could that be the problem ?

---Edited-----

so i restarted my pc didnt change anything
i didnt get any errors at all but i still didnt get my seccond monitro to work after the booting process

i checked
xrandr -q still tells my the HDMI-A-0 is disconnected  

 [sufian@sufian-pc ~]$ systemctl status systemd-backlight@backlight:acpi_video0.service
* systemd-backlight@backlight:acpi_video0.service - Load/Save Screen Backlight Brightness of backlight:acpi_video0
     Loaded: loaded (/usr/lib/systemd/system/systemd-backlight@.service; static)
     Active: inactive (dead)
       Docs: man:systemd-backlight@.service(8)

Last edited by darkx97 (2020-11-18 18:21:10)

Offline

#17 2020-11-18 18:50:19

darkx97
Member
Registered: 2020-11-17
Posts: 34

Re: [Solved] sccond monitor not working

good news

the monitor is working almost like intended i just dont have a "background" or anything  that works like a disctop screen thing working there

the solution was to edit 

 GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3 "

to

 GRUB_CMDLINE_LINUX_DEFAULT="video=HDMI-A-0:e video=HDMI-A-1:e acpi_osi=Linux acpi_backlight=vendor"

so than you sir you were really nice about helping me fixing that
i actually didnot realize that 

GRUB_CMDLINE_LINUX_DEFAULT

are the terminal prameters
i kind of know a solution for it not display a disktop background thing but if you would suggest a  method that would be amazing

thank you again and have a great day/night

Last edited by darkx97 (2020-11-18 18:52:36)

Offline

#18 2020-11-18 19:59:34

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,095

Re: [Solved] sccond monitor not working

GRUB_CMDLINE_LINUX_DEFAULT are the parameters that the bootloader (grub) passes to the kernel (linux) by default.


As for the multiscreen layout, see https://wiki.archlinux.org/index.php/Multihead
Open a new thread (there's a "one problem per thread" rule to let others benefit from your solutions) and post an updated xorg log and, because the desktop environment is gonna be relevant, the output of "loginctl session-status --no-pager".

Edit: VGA/HDMI adapters have a tendency to be wonky - it currently might work by a fluke.

Last edited by seth (2020-11-18 20:00:14)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

Pages: 1

Board footer

Powered by FluxBB