You are not logged in.
- Topics: Active | Unanswered
#1 2020-12-05 09:44:32
- thewooster
- Member
- Registered: 2012-10-20
- Posts: 57
USB Devices Stopped working After upgrade [SOLVED]
I just updated arch and rebooted, now none of my usb devices work. I haven't changed any configs in the mean-time. Everything was working prior to the upgrade.
Kernel: 5.9.11-arch2-1
Desktop Environment: I3-gaps
All of my devices show up with lsusb:
Bus 004 Device 002: ID 8087:8002 Intel Corp. 8 channel internal hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:800a Intel Corp. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 174c:3074 ASMedia Technology Inc. ASM1074 SuperSpeed hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 1050:0407 Yubico.com Yubikey 4/5 OTP+U2F+CCID
Bus 002 Device 003: ID 1e71:170e NZXT Kraken X
Bus 002 Device 006: ID 1b1c:1b13 Corsair Vengeance K70RGB keyboard
Bus 002 Device 004: ID 1b1c:1b2e Corsair Corsair Corsair Gaming M65 Pro RGB Mouse
Bus 002 Device 002: ID 174c:2074 ASMedia Technology Inc. ASM1074 High-Speed hub
Bus 002 Device 008: ID 8087:07dc Intel Corp. Bluetooth wireless interface
Bus 002 Device 007: ID 056a:0378 Wacom Co., Ltd CTL-6100WL [Intuos BT (M)]
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubHowever I am getting no input from mouse/keyboard.
Output form dmesg:
[ 0.107352] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.107353] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.107353] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.107354] PM: hibernation: Registered nosave memory: [mem 0x5ab97000-0x5b8f9fff]
[ 0.107355] PM: hibernation: Registered nosave memory: [mem 0x5bbb7000-0x5c744fff]
[ 0.107355] PM: hibernation: Registered nosave memory: [mem 0x5c745000-0x5cfa3fff]
[ 0.107356] PM: hibernation: Registered nosave memory: [mem 0x5cfa5000-0x5d02afff]
[ 0.107357] PM: hibernation: Registered nosave memory: [mem 0x5d288000-0x5dff8fff]
[ 0.107357] PM: hibernation: Registered nosave memory: [mem 0x5e000000-0x5effffff]
[ 0.107358] PM: hibernation: Registered nosave memory: [mem 0x5f000000-0x5fffffff]
[ 0.107358] PM: hibernation: Registered nosave memory: [mem 0x60000000-0x6fffffff]
[ 0.107358] PM: hibernation: Registered nosave memory: [mem 0x70000000-0xfed1bfff]
[ 0.107359] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.107359] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[ 0.107359] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.107361] [mem 0x70000000-0xfed1bfff] available for PCI devices
[ 0.107361] Booting paravirtualized kernel on bare hardware
[ 0.107363] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.110395] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:12 nr_node_ids:1
[ 0.110695] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
[ 0.110699] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
[ 0.110700] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[ 0.110715] Built 1 zonelists, mobility grouping on. Total pages: 16494974
[ 0.110716] Policy zone: Normal
[ 0.110717] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/MyStorage-rootvol rw cryptdevice=UUID=3139f4fa-679a-4aef-a1be-9ff3488e24d0:MyStorage root=/dev/mapper/MyStorage-rootvol quiet rcutree.rcu_idle_gp_delay=1 apparmor=1 security=apparmor
[ 0.114543] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[ 0.116495] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.116568] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[ 0.254505] Memory: 65715652K/67027288K available (14339K kernel code, 1505K rwdata, 7952K rodata, 1660K init, 2944K bss, 1311376K reserved, 0K cma-reserved)
[ 0.254511] random: get_random_u64 called from __kmem_cache_create+0x26/0x520 with crng_init=0
[ 0.254597] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.254605] Kernel/User page tables isolation: enabled
[ 0.254621] ftrace: allocating 40888 entries in 160 pages
[ 0.264267] ftrace: allocated 160 pages with 2 groups
[ 0.264368] rcu: Preemptible hierarchical RCU implementation.
[ 0.264369] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.264369] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
[ 0.264370] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.264370] Trampoline variant of Tasks RCU enabled.
[ 0.264371] Rude variant of Tasks RCU enabled.
[ 0.264371] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.264372] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.266219] NR_IRQS: 20736, nr_irqs: 928, preallocated irqs: 16
[ 0.266416] Console: colour dummy device 80x25
[ 0.266421] printk: console [tty0] enabled
[ 0.266433] ACPI: Core revision 20200717
[ 0.266584] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.266592] APIC: Switch to symmetric I/O mode setup
[ 0.266678] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.266721] Switched APIC routing to physical flat.
[ 0.267250] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.283260] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30e5a876348, max_idle_ns: 440795308582 ns
[ 0.283262] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.15 BogoMIPS (lpj=11307453)
[ 0.283263] pid_max: default: 32768 minimum: 301
[ 0.283282] LSM: Security Framework initializing
[ 0.283285] Yama: becoming mindful.
[ 0.283300] AppArmor: AppArmor initialized
[ 0.283424] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.283537] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.283718] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.283751] process: using mwait in idle threads
[ 0.283753] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.283754] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.283755] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.283757] Spectre V2 : Mitigation: Full generic retpoline
[ 0.283757] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.283757] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.283758] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.283758] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.283759] Speculative Store Bypass: Vulnerable
[ 0.283760] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.283760] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.283942] Freeing SMP alternatives memory: 32K
[ 0.286645] smpboot: CPU0: Intel(R) Core(TM) i7-6800K CPU @ 3.40GHz (family: 0x6, model: 0x4f, stepping: 0x1)
[ 0.286707] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.286714] ... version: 3
[ 0.286714] ... bit width: 48
[ 0.286714] ... generic registers: 4
[ 0.286715] ... value mask: 0000ffffffffffff
[ 0.286715] ... max period: 00007fffffffffff
[ 0.286716] ... fixed-purpose events: 3
[ 0.286716] ... event mask: 000000070000000f
[ 0.286743] rcu: Hierarchical SRCU implementation.
[ 0.287340] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.287416] smp: Bringing up secondary CPUs ...
[ 0.287493] x86: Booting SMP configuration:
[ 0.287494] .... node #0, CPUs: #1 #2 #3 #4 #5 #6
[ 0.290598] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.290598] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.
[ 0.290598] #7 #8 #9 #10 #11
[ 0.293772] smp: Brought up 1 node, 12 CPUs
[ 0.293772] smpboot: Max logical packages: 1
[ 0.293772] smpboot: Total of 12 processors activated (81446.89 BogoMIPS)
[ 0.298274] devtmpfs: initialized
[ 0.298274] x86/mm: Memory block size: 2048MB
[ 0.298274] PM: Registering ACPI NVS region [mem 0x5bbb7000-0x5c744fff] (12115968 bytes)
[ 0.298274] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.298274] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.298274] pinctrl core: initialized pinctrl subsystem
[ 0.298274] PM: RTC time: 09:21:48, date: 2020-12-05
[ 0.298274] NET: Registered protocol family 16
[ 0.298274] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.298274] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.298274] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.298274] audit: initializing netlink subsys (disabled)
[ 0.298274] audit: type=2000 audit(1607160104.029:1): state=initialized audit_enabled=0 res=1
[ 0.298274] thermal_sys: Registered thermal governor 'fair_share'
[ 0.298274] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.298274] thermal_sys: Registered thermal governor 'step_wise'
[ 0.298274] thermal_sys: Registered thermal governor 'user_space'
[ 0.298274] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.299937] cpuidle: using governor ladder
[ 0.299938] cpuidle: using governor menu
[ 0.299950] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.299950] ACPI: bus type PCI registered
[ 0.299950] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.299996] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x60000000-0x6fffffff] (base 0x60000000)
[ 0.299998] PCI: MMCONFIG at [mem 0x60000000-0x6fffffff] reserved in E820
[ 0.300008] PCI: Using configuration type 1 for base access
[ 0.300683] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.300683] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.300683] ACPI: Added _OSI(Module Device)
[ 0.300683] ACPI: Added _OSI(Processor Device)
[ 0.300683] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.300683] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.300683] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.300683] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.300683] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.334268] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.337380] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.341729] ACPI: Interpreter enabled
[ 0.341741] ACPI: (supports S0 S3 S4 S5)
[ 0.341741] ACPI: Using IOAPIC for interrupt routing
[ 0.341761] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.342419] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.361243] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
[ 0.361247] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.363069] acpi PNP0A03:03: _OSC: platform does not support [SHPCHotplug LTR DPC]
[ 0.363934] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.363935] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.363962] PCI host bridge to bus 0000:ff
[ 0.363963] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.363973] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
[ 0.364005] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
[ 0.364030] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
[ 0.364054] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
[ 0.364079] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
[ 0.364102] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
[ 0.364125] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
[ 0.364151] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
[ 0.364174] pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
[ 0.364197] pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
[ 0.364222] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
[ 0.364245] pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
[ 0.364269] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
[ 0.364292] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
[ 0.364315] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
[ 0.364341] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
[ 0.364364] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
[ 0.364390] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
[ 0.364413] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
[ 0.364435] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
[ 0.364459] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
[ 0.364475] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
[ 0.364503] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
[ 0.364541] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
[ 0.364575] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
[ 0.364608] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
[ 0.364642] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
[ 0.364676] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
[ 0.364708] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
[ 0.364733] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
[ 0.364759] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
[ 0.364796] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
[ 0.364830] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
[ 0.364863] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
[ 0.364896] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
[ 0.364921] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
[ 0.364947] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
[ 0.364973] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
[ 0.364999] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
[ 0.365036] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
[ 0.365070] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
[ 0.365103] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
[ 0.365139] pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
[ 0.365168] pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
[ 0.365196] pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
[ 0.365222] pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000
[ 0.365249] pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000
[ 0.365277] pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000
[ 0.365303] pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000
[ 0.365328] pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000
[ 0.365356] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
[ 0.365380] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
[ 0.365404] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
[ 0.365429] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
[ 0.365446] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
[ 0.365475] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
[ 0.365500] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
[ 0.365634] acpi LNXCPU:0c: Entry not well-defined, consider updating BIOS
[ 0.366480] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.366482] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.367013] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[ 0.367897] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.367898] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.368152] PCI host bridge to bus 0000:00
[ 0.368153] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.368154] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
[ 0.368154] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.368155] pci_bus 0000:00: root bus resource [mem 0x70000000-0xfbffbfff window]
[ 0.368156] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.368166] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
[ 0.368289] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
[ 0.368326] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.368469] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400
[ 0.368506] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.368610] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
[ 0.368647] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.368783] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
[ 0.368820] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.368952] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
[ 0.369050] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
[ 0.369160] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
[ 0.369251] pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
[ 0.369257] pci 0000:00:05.4: reg 0x10: [mem 0xfb53d000-0xfb53dfff]
[ 0.369360] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
[ 0.369539] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
[ 0.369550] pci 0000:00:11.4: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.369556] pci 0000:00:11.4: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.369562] pci 0000:00:11.4: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.369568] pci 0000:00:11.4: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.369574] pci 0000:00:11.4: reg 0x20: [io 0xf020-0xf03f]
[ 0.369580] pci 0000:00:11.4: reg 0x24: [mem 0xfb53c000-0xfb53c7ff]
[ 0.369613] pci 0000:00:11.4: PME# supported from D3hot
[ 0.369703] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
[ 0.369715] pci 0000:00:14.0: reg 0x10: [mem 0xfb520000-0xfb52ffff 64bit]
[ 0.369762] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.369846] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
[ 0.369860] pci 0000:00:16.0: reg 0x10: [mem 0xfb53b000-0xfb53b00f 64bit]
[ 0.369908] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.370002] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
[ 0.370012] pci 0000:00:19.0: reg 0x10: [mem 0xfb500000-0xfb51ffff]
[ 0.370017] pci 0000:00:19.0: reg 0x14: [mem 0xfb538000-0xfb538fff]
[ 0.370023] pci 0000:00:19.0: reg 0x18: [io 0xf000-0xf01f]
[ 0.370067] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.370159] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
[ 0.370172] pci 0000:00:1a.0: reg 0x10: [mem 0xfb537000-0xfb5373ff]
[ 0.370238] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.370328] pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
[ 0.370340] pci 0000:00:1b.0: reg 0x10: [mem 0xfb530000-0xfb533fff 64bit]
[ 0.370396] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.370483] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
[ 0.370542] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.370643] pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
[ 0.370703] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.370804] pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
[ 0.370864] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.370963] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
[ 0.371023] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.371125] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
[ 0.371138] pci 0000:00:1d.0: reg 0x10: [mem 0xfb536000-0xfb5363ff]
[ 0.371204] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.371298] pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
[ 0.371462] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
[ 0.371474] pci 0000:00:1f.3: reg 0x10: [mem 0xfb535000-0xfb5350ff 64bit]
[ 0.371489] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
[ 0.371699] acpiphp: Slot [2] registered
[ 0.371715] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.371856] pci 0000:02:00.0: [144d:a808] type 00 class 0x010802
[ 0.371867] pci 0000:02:00.0: reg 0x10: [mem 0xfb400000-0xfb403fff 64bit]
[ 0.372005] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 0.372008] pci 0000:00:01.1: bridge window [mem 0xfb400000-0xfb4fffff]
[ 0.372149] pci 0000:03:00.0: [10de:1b06] type 00 class 0x030000
[ 0.372158] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.372166] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.372173] pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.372178] pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.372183] pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[ 0.372187] pci 0000:03:00.0: enabling Extended Tags
[ 0.372266] pci 0000:03:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 0.372311] pci 0000:03:00.1: [10de:10ef] type 00 class 0x040300
[ 0.372320] pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
[ 0.372351] pci 0000:03:00.1: enabling Extended Tags
[ 0.372439] pci 0000:00:02.0: PCI bridge to [bus 03]
[ 0.372441] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.372442] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.372444] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.372570] pci 0000:00:03.0: PCI bridge to [bus 04]
[ 0.372604] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.372668] pci 0000:06:00.0: [8086:1539] type 00 class 0x020000
[ 0.372691] pci 0000:06:00.0: reg 0x10: [mem 0xfb300000-0xfb31ffff]
[ 0.372715] pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd01f]
[ 0.372728] pci 0000:06:00.0: reg 0x1c: [mem 0xfb320000-0xfb323fff]
[ 0.372860] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.372955] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ 0.372957] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.372959] pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfb3fffff]
[ 0.373032] pci 0000:07:00.0: [8086:08b3] type 00 class 0x028000
[ 0.373070] pci 0000:07:00.0: reg 0x10: [mem 0xfb200000-0xfb201fff 64bit]
[ 0.373259] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.373385] pci 0000:00:1c.3: PCI bridge to [bus 07]
[ 0.373388] pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb2fffff]
[ 0.373444] pci 0000:08:00.0: [1b21:1242] type 00 class 0x0c0330
[ 0.373466] pci 0000:08:00.0: reg 0x10: [mem 0xfb100000-0xfb107fff 64bit]
[ 0.373518] pci 0000:08:00.0: enabling Extended Tags
[ 0.373591] pci 0000:08:00.0: PME# supported from D3hot D3cold
[ 0.373689] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ 0.373693] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
[ 0.373720] pci_bus 0000:00: on NUMA node 0
[ 0.374287] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.374327] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.374366] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.374404] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.374443] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.374481] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.374519] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.374558] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.374610] iommu: Default domain type: Translated
[ 0.374610] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[ 0.374610] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.374610] pci 0000:03:00.0: vgaarb: bridge control possible
[ 0.374610] vgaarb: loaded
[ 0.374610] SCSI subsystem initialized
[ 0.374611] libata version 3.00 loaded.
[ 0.374611] ACPI: bus type USB registered
[ 0.374611] usbcore: registered new interface driver usbfs
[ 0.374611] usbcore: registered new interface driver hub
[ 0.374611] usbcore: registered new device driver usb
[ 0.374611] pps_core: LinuxPPS API ver. 1 registered
[ 0.374611] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.374611] PTP clock support registered
[ 0.374611] EDAC MC: Ver: 3.0.0
[ 0.374611] NetLabel: Initializing
[ 0.374611] NetLabel: domain hash size = 128
[ 0.374611] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.374611] NetLabel: unlabeled traffic allowed by default
[ 0.374611] PCI: Using ACPI for IRQ routing
[ 0.376593] PCI: pci_cache_line_size set to 64 bytes
[ 0.376671] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.376672] e820: reserve RAM buffer [mem 0x5ab97000-0x5bffffff]
[ 0.376672] e820: reserve RAM buffer [mem 0x5bbb7000-0x5bffffff]
[ 0.376673] e820: reserve RAM buffer [mem 0x5cfa5000-0x5fffffff]
[ 0.376673] e820: reserve RAM buffer [mem 0x5d288000-0x5fffffff]
[ 0.376674] e820: reserve RAM buffer [mem 0x5e000000-0x5fffffff]
[ 0.379953] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.379955] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.383003] clocksource: Switched to clocksource tsc-early
[ 0.387903] VFS: Disk quotas dquot_6.6.0
[ 0.387912] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.387987] AppArmor: AppArmor Filesystem Enabled
[ 0.388002] pnp: PnP ACPI init
[ 0.388195] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.388268] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.388269] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.388270] system 00:01: [io 0x0580-0x059f] has been reserved
[ 0.388271] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.388272] system 00:01: [io 0x0880-0x0883] has been reserved
[ 0.388273] system 00:01: [io 0x0800-0x081f] has been reserved
[ 0.388274] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
[ 0.388275] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
[ 0.388275] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 0.388276] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.388277] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
[ 0.388278] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
[ 0.388278] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 0.388282] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.388433] system 00:02: [io 0x0280-0x028f] has been reserved
[ 0.388434] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.388435] system 00:02: [io 0x02a0-0x02af] has been reserved
[ 0.388435] system 00:02: [io 0x02b0-0x02bf] has been reserved
[ 0.388437] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.388864] pnp: PnP ACPI: found 3 devices
[ 0.394136] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.394171] NET: Registered protocol family 2
[ 0.394319] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.394632] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.394959] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.395004] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.395181] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[ 0.395379] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.395506] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.395605] NET: Registered protocol family 1
[ 0.395633] NET: Registered protocol family 44
[ 0.395650] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.395655] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 0.395657] pci 0000:00:01.1: bridge window [mem 0xfb400000-0xfb4fffff]
[ 0.395660] pci 0000:00:02.0: PCI bridge to [bus 03]
[ 0.395661] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.395662] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.395664] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.395666] pci 0000:00:03.0: PCI bridge to [bus 04]
[ 0.395670] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.395676] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ 0.395678] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.395680] pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfb3fffff]
[ 0.395685] pci 0000:00:1c.3: PCI bridge to [bus 07]
[ 0.395687] pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb2fffff]
[ 0.395692] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ 0.395695] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
[ 0.395700] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.395701] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
[ 0.395701] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.395702] pci_bus 0000:00: resource 7 [mem 0x70000000-0xfbffbfff window]
[ 0.395703] pci_bus 0000:02: resource 1 [mem 0xfb400000-0xfb4fffff]
[ 0.395703] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.395704] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
[ 0.395705] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.395706] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 0.395706] pci_bus 0000:06: resource 1 [mem 0xfb300000-0xfb3fffff]
[ 0.395707] pci_bus 0000:07: resource 1 [mem 0xfb200000-0xfb2fffff]
[ 0.395707] pci_bus 0000:08: resource 1 [mem 0xfb100000-0xfb1fffff]
[ 0.395894] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28]
[ 0.416653] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6e0 took 20111 usecs
[ 0.433316] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6e0 took 16261 usecs
[ 0.433322] pci 0000:02:00.0: CLS mismatch (64 != 32), using 64 bytes
[ 0.433331] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.433357] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[ 0.433517] Trying to unpack rootfs image as initramfs...
[ 0.881619] Freeing initrd memory: 60824K
[ 0.881621] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.881623] software IO TLB: mapped [mem 0x56b97000-0x5ab97000] (64MB)
[ 0.881800] check: Scanning for low memory corruption every 60 seconds
[ 0.882098] Initialise system trusted keyrings
[ 0.882105] Key type blacklist registered
[ 0.882142] workingset: timestamp_bits=41 max_order=24 bucket_order=0
[ 0.882830] zbud: loaded
[ 0.889478] Key type asymmetric registered
[ 0.889479] Asymmetric key parser 'x509' registered
[ 0.889484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.889519] io scheduler mq-deadline registered
[ 0.889519] io scheduler kyber registered
[ 0.889532] io scheduler bfq registered
[ 0.889816] pcieport 0000:00:01.0: PME: Signaling with IRQ 25
[ 0.889853] pcieport 0000:00:01.0: AER: enabled with IRQ 25
[ 0.889980] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[ 0.890019] pcieport 0000:00:01.1: AER: enabled with IRQ 26
[ 0.890137] pcieport 0000:00:02.0: PME: Signaling with IRQ 28
[ 0.890176] pcieport 0000:00:02.0: AER: enabled with IRQ 28
[ 0.890296] pcieport 0000:00:03.0: PME: Signaling with IRQ 30
[ 0.890325] pcieport 0000:00:03.0: AER: enabled with IRQ 30
[ 0.890446] pcieport 0000:00:1c.0: PME: Signaling with IRQ 31
[ 0.890567] pcieport 0000:00:1c.2: PME: Signaling with IRQ 32
[ 0.890689] pcieport 0000:00:1c.3: PME: Signaling with IRQ 33
[ 0.890760] pcieport 0000:00:1c.4: PME: Signaling with IRQ 34
[ 0.890858] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.890906] vesafb: mode is 2560x1440x32, linelength=10240, pages=0
[ 0.890906] vesafb: scrolling: redraw
[ 0.890908] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.890914] pmd_set_huge: Cannot satisfy [mem 0xf1000000-0xf1200000] with a huge-page mapping due to MTRR override.
[ 0.890927] vesafb: framebuffer at 0xf1000000, mapped to 0x000000006f86d67a, using 14400k, total 14400k
[ 0.890949] fbcon: Deferring console take-over
[ 0.890949] fb0: VESA VGA frame buffer device
[ 0.890956] intel_idle: MWAIT substates: 0x2120
[ 0.891008] Monitor-Mwait will be used to enter C-1 state
[ 0.891013] Monitor-Mwait will be used to enter C-2 state
[ 0.891016] ACPI: \_SB_.SCK0.CP00: Found 2 idle states
[ 0.891017] intel_idle: v0.5.1 model 0x4F
[ 0.891283] intel_idle: Local APIC timer is reliable in all C-states
[ 0.891458] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.891474] ACPI: Power Button [PWRB]
[ 0.891494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.893319] ACPI: Power Button [PWRF]
[ 0.894729] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.895044] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.895045] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.895688] nvme nvme0: pci function 0000:02:00.0
[ 0.895727] ahci 0000:00:11.4: version 3.0
[ 0.895833] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.895835] ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst
[ 0.896031] scsi host0: ahci
[ 0.896125] scsi host1: ahci
[ 0.896177] scsi host2: ahci
[ 0.896233] scsi host3: ahci
[ 0.896257] ata1: SATA max UDMA/133 abar m2048@0xfb53c000 port 0xfb53c100 irq 37
[ 0.896258] ata2: DUMMY
[ 0.896258] ata3: DUMMY
[ 0.896258] ata4: DUMMY
[ 0.896293] usbcore: registered new interface driver usbserial_generic
[ 0.896297] usbserial: USB Serial support registered for generic
[ 0.896307] rtc_cmos 00:00: RTC can wake from S4
[ 0.896445] rtc_cmos 00:00: registered as rtc0
[ 0.896470] rtc_cmos 00:00: setting system clock to 2020-12-05T09:21:49 UTC (1607160109)
[ 0.896480] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.896509] intel_pstate: Intel P-state driver initializing
[ 0.896741] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.896893] drop_monitor: Initializing network drop monitor service
[ 0.896988] NET: Registered protocol family 10
[ 0.901935] Segment Routing with IPv6
[ 0.901937] RPL Segment Routing with IPv6
[ 0.901972] NET: Registered protocol family 17
[ 0.902670] microcode: sig=0x406f1, pf=0x4, revision=0xb00002a
[ 0.902716] microcode: Microcode Update Driver: v2.2.
[ 0.902794] resctrl: L3 allocation detected
[ 0.902794] resctrl: L3DATA allocation detected
[ 0.902795] resctrl: L3CODE allocation detected
[ 0.902795] resctrl: L3 monitoring detected
[ 0.902797] IPI shorthand broadcast: enabled
[ 0.902801] sched_clock: Marking stable (902569693, 218843)->(5133285144, -4230496608)
[ 0.902865] registered taskstats version 1
[ 0.902872] Loading compiled-in X.509 certificates
[ 0.903686] nvme nvme0: missing or invalid SUBNQN field.
[ 0.903699] nvme nvme0: Shutdown timeout set to 8 seconds
[ 0.904705] Loaded X.509 cert 'Build time autogenerated kernel key: 5cc7cf86e3be95b78992997e03e5d198512e8cbf'
[ 0.904809] zswap: loaded using pool lz4/z3fold
[ 0.904886] Key type ._fscrypt registered
[ 0.904887] Key type .fscrypt registered
[ 0.904887] Key type fscrypt-provisioning registered
[ 0.904907] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.905243] PM: Magic number: 0:189:373
[ 0.905259] vc vcsa1: hash matches
[ 0.905364] acpi LNXCPU:aa: hash matches
[ 0.905524] RAS: Correctable Errors collector initialized.
[ 0.916838] nvme nvme0: 12/0/0 default/read/poll queues
[ 0.920737] nvme0n1: p1 p2 p3
[ 1.213336] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.214293] ata1.00: ATA-9: MKNSSDRE1TB, N1007C, max UDMA/133
[ 1.214296] ata1.00: 1953525168 sectors, multi 2: LBA48 NCQ (depth 32), AA
[ 1.214463] ata1.00: configured for UDMA/133
[ 1.214573] scsi 0:0:0:0: Direct-Access ATA MKNSSDRE1TB 7C PQ: 0 ANSI: 5
[ 1.214737] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.214744] sd 0:0:0:0: [sda] Write Protect is off
[ 1.214745] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.214753] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.216460] sda: sda1
[ 1.216724] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.217828] Freeing unused decrypted memory: 2040K
[ 1.218189] Freeing unused kernel image (initmem) memory: 1660K
[ 1.239996] Write protecting the kernel read-only data: 24576k
[ 1.240759] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 1.240864] Freeing unused kernel image (rodata/data gap) memory: 240K
[ 1.274796] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.274797] x86/mm: Checking user space page tables
[ 1.307306] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.307309] Run /init as init process
[ 1.307310] with arguments:
[ 1.307310] /init
[ 1.307310] with environment:
[ 1.307311] HOME=/
[ 1.307311] TERM=linux
[ 1.307311] BOOT_IMAGE=/vmlinuz-linux
[ 1.307312] cryptdevice=UUID=3139f4fa-679a-4aef-a1be-9ff3488e24d0:MyStorage
[ 1.316976] fbcon: Taking over console
[ 1.317030] Console: switching to colour frame buffer device 160x45
[ 1.598212] nvidia: loading out-of-tree module taints kernel.
[ 1.598218] nvidia: module license 'NVIDIA' taints kernel.
[ 1.598219] Disabling lock debugging due to kernel taint
[ 1.606962] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1.619678] nvidia-nvlink: Nvlink Core is being initialized, major device number 241
[ 1.620074] nvidia 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 1.736686] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 455.45.01 Thu Nov 5 23:03:56 UTC 2020
[ 1.737862] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
[ 1.743874] nvidia-uvm: Loaded the UVM driver, major device number 239.
[ 1.845664] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.846297] ehci-pci: EHCI PCI platform driver
[ 1.846518] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.846524] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.846535] ehci-pci 0000:00:1a.0: debug port 2
[ 1.850458] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.850469] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb537000
[ 1.855113] cryptd: max_cpu_qlen set to 1000
[ 1.860025] AVX2 version of gcm_enc/dec engaged.
[ 1.860026] AES CTR mode by8 optimization enabled
[ 1.863279] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.863330] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[ 1.863331] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.863332] usb usb1: Product: EHCI Host Controller
[ 1.863333] usb usb1: Manufacturer: Linux 5.9.11-arch2-1 ehci_hcd
[ 1.863334] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.863457] hub 1-0:1.0: USB hub found
[ 1.863463] hub 1-0:1.0: 2 ports detected
[ 1.863674] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.863679] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.864736] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 1.864741] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.864964] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[ 1.864965] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.864965] usb usb2: Product: xHCI Host Controller
[ 1.864966] usb usb2: Manufacturer: Linux 5.9.11-arch2-1 xhci-hcd
[ 1.864966] usb usb2: SerialNumber: 0000:00:14.0
[ 1.865027] hub 2-0:1.0: USB hub found
[ 1.865042] hub 2-0:1.0: 15 ports detected
[ 1.865864] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.865866] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.865867] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.865883] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.865908] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[ 1.865908] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.865909] usb usb3: Product: xHCI Host Controller
[ 1.865909] usb usb3: Manufacturer: Linux 5.9.11-arch2-1 xhci-hcd
[ 1.865910] usb usb3: SerialNumber: 0000:00:14.0
[ 1.865964] hub 3-0:1.0: USB hub found
[ 1.865974] hub 3-0:1.0: 6 ports detected
[ 1.866370] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.866378] ehci-pci 0000:00:1d.0: debug port 2
[ 1.870262] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.870265] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb536000
[ 1.883327] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.883350] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[ 1.883350] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.883351] usb usb4: Product: EHCI Host Controller
[ 1.883352] usb usb4: Manufacturer: Linux 5.9.11-arch2-1 ehci_hcd
[ 1.883352] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.883416] hub 4-0:1.0: USB hub found
[ 1.883419] hub 4-0:1.0: 2 ports detected
[ 1.883516] xhci_hcd 0000:08:00.0: xHCI Host Controller
[ 1.883518] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 5
[ 1.889939] tsc: Refined TSC clocksource calibration: 3392.141 MHz
[ 1.889944] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e54e922eb, max_idle_ns: 440795360904 ns
[ 1.889966] clocksource: Switched to clocksource tsc
[ 1.942376] xhci_hcd 0000:08:00.0: hcc params 0x0200eec0 hci version 0x110 quirks 0x0000000000800010
[ 1.942544] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[ 1.942545] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.942545] usb usb5: Product: xHCI Host Controller
[ 1.942546] usb usb5: Manufacturer: Linux 5.9.11-arch2-1 xhci-hcd
[ 1.942546] usb usb5: SerialNumber: 0000:08:00.0
[ 1.942622] hub 5-0:1.0: USB hub found
[ 1.942628] hub 5-0:1.0: 2 ports detected
[ 1.942713] xhci_hcd 0000:08:00.0: xHCI Host Controller
[ 1.942714] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 6
[ 1.942716] xhci_hcd 0000:08:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.942737] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.942747] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[ 1.942748] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.942749] usb usb6: Product: xHCI Host Controller
[ 1.942749] usb usb6: Manufacturer: Linux 5.9.11-arch2-1 xhci-hcd
[ 1.942750] usb usb6: SerialNumber: 0000:08:00.0
[ 1.942793] hub 6-0:1.0: USB hub found
[ 1.942798] hub 6-0:1.0: 2 ports detected
[ 1.969325] Key type encrypted registered
[ 1.972020] device-mapper: uevent: version 1.0.3
[ 1.972052] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 2.196631] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.196731] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.213324] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.215230] usb 3-3: New USB device found, idVendor=174c, idProduct=3074, bcdDevice= 0.01
[ 2.215234] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.215236] usb 3-3: Product: AS2107
[ 2.215238] usb 3-3: Manufacturer: ASMedia
[ 2.215239] usb 3-3: SerialNumber: USB2.0 Hub
[ 2.216076] hub 3-3:1.0: USB hub found
[ 2.216198] hub 3-3:1.0: 4 ports detected
[ 2.336624] usb 2-3: new high-speed USB device number 2 using xhci_hcd
[ 2.347017] usb 1-1: New USB device found, idVendor=8087, idProduct=800a, bcdDevice= 0.05
[ 2.347021] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.347317] hub 1-1:1.0: USB hub found
[ 2.347386] hub 1-1:1.0: 6 ports detected
[ 2.363636] usb 4-1: New USB device found, idVendor=8087, idProduct=8002, bcdDevice= 0.05
[ 2.363637] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.363782] hub 4-1:1.0: USB hub found
[ 2.363884] hub 4-1:1.0: 8 ports detected
[ 2.477609] random: fast init done
[ 2.478559] usb 2-3: New USB device found, idVendor=174c, idProduct=2074, bcdDevice= 0.01
[ 2.478563] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.478565] usb 2-3: Product: AS2107
[ 2.478567] usb 2-3: Manufacturer: ASMedia
[ 2.478569] usb 2-3: SerialNumber: USB2.0 Hub
[ 2.479043] hub 2-3:1.0: USB hub found
[ 2.479189] hub 2-3:1.0: 4 ports detected
[ 2.603325] usb 2-6: new full-speed USB device number 3 using xhci_hcd
[ 2.744767] usb 2-6: New USB device found, idVendor=1e71, idProduct=170e, bcdDevice= 2.00
[ 2.744771] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.744773] usb 2-6: Product: NZXT USB Device
[ 2.744775] usb 2-6: Manufacturer: NZXT.-Inc.
[ 2.744777] usb 2-6: SerialNumber: 498D3678333
[ 2.752236] hid: raw HID events driver (C) Jiri Kosina
[ 2.757016] usbcore: registered new interface driver usbhid
[ 2.757018] usbhid: USB HID core driver
[ 2.761218] hid-generic 0003:1E71:170E.0001: hiddev0,hidraw0: USB HID v1.10 Device [NZXT.-Inc. NZXT USB Device] on usb-0000:00:14.0-6/input0
[ 2.833326] usb 2-3.1: new full-speed USB device number 4 using xhci_hcd
[ 2.950506] usb 2-3.1: New USB device found, idVendor=1b1c, idProduct=1b2e, bcdDevice= 3.06
[ 2.950509] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.950512] usb 2-3.1: Product: Corsair Gaming M65 Pro RGB Mouse
[ 2.950514] usb 2-3.1: Manufacturer: Corsair
[ 2.950516] usb 2-3.1: SerialNumber: 18014013AF08252158B1E0C7F5001940
[ 2.961699] input: Corsair Corsair Gaming M65 Pro RGB Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.0/0003:1B1C:1B2E.0002/input/input2
[ 2.961743] input: Corsair Corsair Gaming M65 Pro RGB Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.0/0003:1B1C:1B2E.0002/input/input3
[ 2.961781] input: Corsair Corsair Gaming M65 Pro RGB Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.0/0003:1B1C:1B2E.0002/input/input4
[ 2.961887] hid-generic 0003:1B1C:1B2E.0002: input,hiddev1,hidraw1: USB HID v1.11 Mouse [Corsair Corsair Gaming M65 Pro RGB Mouse] on usb-0000:00:14.0-3.1/input0
[ 2.964975] hid-generic 0003:1B1C:1B2E.0003: hiddev2,hidraw2: USB HID v1.11 Device [Corsair Corsair Gaming M65 Pro RGB Mouse] on usb-0000:00:14.0-3.1/input1
[ 3.063324] usb 2-7: new full-speed USB device number 5 using xhci_hcd
[ 3.204652] usb 2-7: New USB device found, idVendor=1050, idProduct=0407, bcdDevice= 4.37
[ 3.204656] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.204659] usb 2-7: Product: Yubikey 4 OTP+U2F+CCID
[ 3.204661] usb 2-7: Manufacturer: Yubico
[ 3.206438] input: Yubico Yubikey 4 OTP+U2F+CCID as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:1050:0407.0004/input/input5
[ 3.260085] hid-generic 0003:1050:0407.0004: input,hidraw3: USB HID v1.10 Keyboard [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:00:14.0-7/input0
[ 3.260791] hid-generic 0003:1050:0407.0005: hiddev3,hidraw4: USB HID v1.10 Device [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:00:14.0-7/input1
[ 3.293334] usb 2-3.3: new full-speed USB device number 6 using xhci_hcd
[ 3.523324] usb 2-10: new full-speed USB device number 7 using xhci_hcd
[ 3.664520] usb 2-10: New USB device found, idVendor=056a, idProduct=0378, bcdDevice= 1.11
[ 3.664524] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.664527] usb 2-10: Product: Intuos BT M
[ 3.664529] usb 2-10: Manufacturer: Wacom Co.,Ltd.
[ 3.664531] usb 2-10: SerialNumber: 0GH00U2008628
[ 3.668144] hid-generic 0003:056A:0378.0006: hiddev4,hidraw5: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos BT M] on usb-0000:00:14.0-10/input0
[ 3.789991] usb 2-11: new full-speed USB device number 8 using xhci_hcd
[ 3.930980] usb 2-11: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[ 3.930984] usb 2-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.503324] usb 2-3.3: New USB device found, idVendor=1b1c, idProduct=1b13, bcdDevice= 3.08
[ 7.503328] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.503330] usb 2-3.3: Product: Corsair K70 RGB Gaming Keyboard
[ 7.503332] usb 2-3.3: Manufacturer: Corsair
[ 7.503334] usb 2-3.3: SerialNumber: 0301200FAEAA100455014A23F5001942
[ 8.337795] input: Corsair Corsair K70 RGB Gaming Keyboard Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:1B1C:1B13.0007/input/input6
[ 8.393415] input: Corsair Corsair K70 RGB Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:1B1C:1B13.0007/input/input7
[ 8.393459] input: Corsair Corsair K70 RGB Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:1B1C:1B13.0007/input/input8
[ 8.393498] input: Corsair Corsair K70 RGB Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:1B1C:1B13.0007/input/input9
[ 8.393598] hid-generic 0003:1B1C:1B13.0007: input,hiddev5,hidraw6: USB HID v1.11 Keyboard [Corsair Corsair K70 RGB Gaming Keyboard ] on usb-0000:00:14.0-3.3/input0
[ 9.013665] hid-generic 0003:1B1C:1B13.0008: hiddev6,hidraw7: USB HID v1.11 Device [Corsair Corsair K70 RGB Gaming Keyboard ] on usb-0000:00:14.0-3.3/input1
[ 11.644511] random: crng init done
[ 60.086540] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 60.164199] systemd[1]: systemd 247.1-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 60.180114] systemd[1]: Detected architecture x86-64.
[ 60.210700] systemd[1]: Set hostname to <bipolarrobot.bioticpenguins.science>.
[ 60.320279] systemd[1]: Queued start job for default target Graphical Interface.
[ 60.328509] systemd[1]: Created slice system-getty.slice.
[ 60.328758] systemd[1]: Created slice system-modprobe.slice.
[ 60.328960] systemd[1]: Created slice Cryptsetup Units Slice.
[ 60.329184] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 60.329359] systemd[1]: Created slice User and Session Slice.
[ 60.329401] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 60.329430] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 60.329539] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 60.329594] systemd[1]: Reached target Host and Network Name Lookups.
[ 60.329601] systemd[1]: Reached target Paths.
[ 60.329616] systemd[1]: Reached target Slices.
[ 60.329626] systemd[1]: Reached target Swap.
[ 60.329674] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 60.329851] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 60.329995] systemd[1]: Listening on LVM2 poll daemon socket.
[ 60.333272] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 60.333295] systemd[1]: Reached target RPC Port Mapper.
[ 60.334072] systemd[1]: Listening on Process Core Dump Socket.
[ 60.334184] systemd[1]: Listening on Journal Audit Socket.
[ 60.334255] systemd[1]: Listening on Journal Socket (/dev/log).
[ 60.334324] systemd[1]: Listening on Journal Socket.
[ 60.334531] systemd[1]: Listening on udev Control Socket.
[ 60.334596] systemd[1]: Listening on udev Kernel Socket.
[ 60.335149] systemd[1]: Mounting Huge Pages File System...
[ 60.335796] systemd[1]: Mounting POSIX Message Queue File System...
[ 60.336357] systemd[1]: Mounting NFSD configuration filesystem...
[ 60.337005] systemd[1]: Mounting Kernel Debug File System...
[ 60.337649] systemd[1]: Mounting Kernel Trace File System...
[ 60.337712] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 60.338368] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 60.338964] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 60.339580] systemd[1]: Starting Load Kernel Module configfs...
[ 60.340185] systemd[1]: Starting Load Kernel Module drm...
[ 60.340795] systemd[1]: Starting Load Kernel Module fuse...
[ 60.341736] systemd[1]: Starting Set Up Additional Binary Formats...
[ 60.341797] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 60.342965] systemd[1]: Starting Journal Service...
[ 60.344325] systemd[1]: Starting Load Kernel Modules...
[ 60.345187] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 60.345251] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 60.345910] Linux agpgart interface v0.103
[ 60.346087] systemd[1]: Starting Coldplug All udev Devices...
[ 60.347935] systemd[1]: Mounted Huge Pages File System.
[ 60.348026] systemd[1]: Mounted POSIX Message Queue File System.
[ 60.348105] systemd[1]: Mounted Kernel Debug File System.
[ 60.348183] systemd[1]: Mounted Kernel Trace File System.
[ 60.348653] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 60.348853] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
[ 60.348920] systemd[1]: modprobe@configfs.service: Succeeded.
[ 60.349289] systemd[1]: Finished Load Kernel Module configfs.
[ 60.350603] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 60.350746] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 395 (systemd-binfmt)
[ 60.351977] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 60.352860] systemd[1]: Mounting Kernel Configuration File System...
[ 60.352948] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 60.353850] fuse: init (API version 7.31)
[ 60.354434] systemd[1]: Starting Rebuild Hardware Database...
[ 60.355067] systemd[1]: Starting Create System Users...
[ 60.355822] systemd[1]: modprobe@fuse.service: Succeeded.
[ 60.356083] systemd[1]: Finished Load Kernel Module fuse.
[ 60.356176] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 60.356276] systemd[1]: Mounted Kernel Configuration File System.
[ 60.357029] systemd[1]: Mounting FUSE Control File System...
[ 60.358295] systemd[1]: Finished Set Up Additional Binary Formats.
[ 60.358899] systemd[1]: Mounted FUSE Control File System.
[ 60.373895] systemd[1]: modprobe@drm.service: Succeeded.
[ 60.374309] systemd[1]: Finished Load Kernel Module drm.
[ 60.374365] audit: type=1130 audit(1607160168.973:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 60.374377] audit: type=1131 audit(1607160168.973:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 60.378211] systemd[1]: Finished Create System Users.
[ 60.378248] audit: type=1130 audit(1607160168.976:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 60.379166] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 60.380675] RPC: Registered named UNIX socket transport module.
[ 60.380677] RPC: Registered udp transport module.
[ 60.380677] RPC: Registered tcp transport module.
[ 60.380678] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 60.390578] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 60.390619] audit: type=1130 audit(1607160168.990:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 60.420299] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 60.423543] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 60.424164] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 60.424165] cfg80211: failed to load regulatory.db
[ 60.430788] systemd[1]: Started Journal Service.
[ 60.430858] audit: type=1130 audit(1607160169.030:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 60.435329] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 60.448804] audit: type=1130 audit(1607160169.046:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 60.477296] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 60.481147] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 60.484010] tun: Universal TUN/TAP device driver, 1.6
[ 60.500022] vboxdrv: Found 12 processor cores
[ 60.523394] vboxdrv: TSC mode is Invariant, tentative frequency 3392139796 Hz
[ 60.523395] vboxdrv: Successfully loaded version 6.1.16 (interface 0x00300000)
[ 60.524087] VBoxNetAdp: Successfully started.
[ 60.525950] VBoxNetFlt: Successfully started.
[ 60.527209] audit: type=1130 audit(1607160169.126:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 60.532812] audit: type=1130 audit(1607160169.130:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 60.677936] audit: type=1130 audit(1607160169.276:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 60.678566] audit: type=1334 audit(1607160169.276:11): prog-id=5 op=LOAD
[ 75.399122] e1000e: Intel(R) PRO/1000 Network Driver
[ 75.399123] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 75.399353] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 75.410066] input: Wacom Intuos BT M Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10:1.0/0003:056A:0378.0006/input/input10
[ 75.410152] input: Wacom Intuos BT M Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10:1.0/0003:056A:0378.0006/input/input12
[ 75.410192] wacom 0003:056A:0378.0006: hidraw5: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos BT M] on usb-0000:00:14.0-10/input0
[ 75.416801] snd_hda_intel 0000:03:00.1: Disabling MSI
[ 75.416831] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
[ 75.437096] mousedev: PS/2 mouse device common for all mice
[ 75.470958] dca service started, version 1.12.1
[ 75.472335] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 75.477838] Intel(R) Wireless WiFi driver for Linux
[ 75.480519] iwlwifi 0000:07:00.0: loaded firmware version 17.3216344376.0 3160-17.ucode op_mode iwlmvm
[ 75.482817] Bluetooth: Core ver 2.22
[ 75.482836] NET: Registered protocol family 31
[ 75.482837] Bluetooth: HCI device and connection manager initialized
[ 75.482842] Bluetooth: HCI socket layer initialized
[ 75.482845] Bluetooth: L2CAP socket layer initialized
[ 75.482849] Bluetooth: SCO socket layer initialized
[ 75.482992] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 75.484955] i2c i2c-0: 4/8 memory slots populated (from DMI)
[ 75.484956] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD
[ 75.486087] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input13
[ 75.486129] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input14
[ 75.486156] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input15
[ 75.486181] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input16
[ 75.486207] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input17
[ 75.486231] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input18
[ 75.486257] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input19
[ 75.490458] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 75.490915] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 75.490917] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 75.490918] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 75.490918] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 75.490919] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 75.490919] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 75.490921] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 75.490921] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 75.490922] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 75.498021] igb: Intel(R) Gigabit Ethernet Network Driver
[ 75.498024] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 75.525795] pps pps0: new PPS source ptp1
[ 75.525834] igb 0000:06:00.0: added PHC on eth0
[ 75.525835] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 75.525837] igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 70:85:c2:0d:a4:e8
[ 75.525838] igb 0000:06:00.0: eth0: PBA No: FFFFFF-0FF
[ 75.525839] igb 0000:06:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[ 75.542283] kauditd_printk_skb: 3 callbacks suppressed
[ 75.542284] audit: type=1130 audit(1607160184.140:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 75.543418] e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) 70:85:c2:0d:a4:ea
[ 75.543420] e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
[ 75.543455] e1000e 0000:00:19.0 eth1: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 75.558865] audit: type=1130 audit(1607160184.156:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-fsck@dev-disk-by\x2duuid-2a34f44c\x2d78c0\x2d4a99\x2d88a0\x2dcc69abde9b82 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 75.560883] EXT4-fs (nvme0n1p2): mounting ext2 file system using the ext4 subsystem
[ 75.563098] EXT4-fs (nvme0n1p2): mounted filesystem without journal. Opts: (null)
[ 75.600182] usbcore: registered new interface driver btusb
[ 75.612511] Bluetooth: hci0: read Intel version: 3707100100012d0d00
[ 75.612801] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[ 75.613974] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 75.614029] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 75.614101] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 75.614150] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 75.614192] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[ 75.614227] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
[ 75.614259] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[ 75.614291] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[ 75.614432] input: PC Speaker as /devices/platform/pcspkr/input/input28
[ 75.615354] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 455.45.01 Thu Nov 5 22:55:44 UTC 2020
[ 75.618746] iwlwifi 0000:07:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[ 75.619241] [drm] [nvidia-drm] [GPU ID 0x00000300] Loading driver
[ 75.622635] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 655360 ms ovfl timer
[ 75.622636] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 75.624987] iwlwifi 0000:07:00.0: reporting RF_KILL (radio disabled)
[ 75.625006] iwlwifi 0000:07:00.0: RF_KILL bit toggled to disable radio.
[ 75.637405] iwlwifi 0000:07:00.0: base HW address: a0:d3:7a:6d:2e:0a
[ 75.649460] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 75.697280] audit: type=1130 audit(1607160184.296:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-fsck@dev-disk-by\x2duuid-dff60e09\x2df6c6\x2d4f8e\x2d9ca2\x2d83d8421abe5c comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 75.702104] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 75.707245] audit: type=1130 audit(1607160184.306:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-fsck@dev-disk-by\x2duuid-53871bde\x2ddf10\x2d45c6\x2d8106\x2de51e7f7dd6c9 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 75.708457] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 75.716791] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 75.718286] audit: type=1130 audit(1607160184.316:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 75.724472] Bluetooth: hci0: Intel BT fw patch 0x27 completed & activated
[ 75.763996] audit: type=1130 audit(1607160184.363:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=lvm2-pvscan@254:0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 75.816956] audit: type=1130 audit(1607160184.416:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 75.875324] iTCO_vendor_support: vendor-support=0
[ 75.882176] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 75.882189] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 75.882206] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 75.882212] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 75.882215] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 75.882219] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 75.882222] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 75.882227] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 75.882230] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 75.882234] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 75.882238] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 75.882242] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 75.882246] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 75.882250] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 75.882253] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 75.882258] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 75.882261] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 75.882267] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 75.882273] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 75.882278] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 75.882284] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 75.882290] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 75.882293] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 75.882298] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 75.882301] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 75.882306] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 75.882309] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 75.882333] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
[ 75.882337] EDAC sbridge: Couldn't find mci handler
[ 75.882338] EDAC sbridge: Failed to register device with error -19.
[ 75.883400] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 75.883451] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 75.905348] igb 0000:06:00.0 enp6s0: renamed from eth0
[ 75.943430] e1000e 0000:00:19.0 enp0s25: renamed from eth1
[ 75.991248] audit: type=1130 audit(1607160184.590:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 75.991417] iwlwifi 0000:07:00.0 wlp7s0: renamed from wlan0
[ 76.040294] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.040301] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.040314] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 76.040319] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.040320] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.040324] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.040325] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.040329] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.040331] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.040334] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.040336] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.040339] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.040341] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.040344] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.040346] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.040349] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 76.040352] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 76.040356] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 76.040361] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 76.040365] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 76.040370] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 76.040374] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.040376] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.040380] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.040381] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.040385] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.040390] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.040419] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
[ 76.040425] EDAC sbridge: Couldn't find mci handler
[ 76.040426] EDAC sbridge: Failed to register device with error -19.
[ 76.213714] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.213723] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.213742] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 76.213747] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.213749] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.213753] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.213755] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.213759] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.213760] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.213764] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.213766] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.213770] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.213772] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.213776] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.213778] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.213781] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 76.213787] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 76.213794] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 76.213801] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 76.213806] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 76.213812] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 76.213818] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.213819] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.213824] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.213825] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.213830] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.213832] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.213859] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
[ 76.213865] EDAC sbridge: Couldn't find mci handler
[ 76.213866] EDAC sbridge: Failed to register device with error -19.
[ 76.383679] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.383690] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.383710] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 76.383716] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.383718] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.383723] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.383725] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.383730] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.383732] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.383737] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.383739] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.383744] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.383746] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.383751] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.383753] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.383757] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 76.383761] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 76.383767] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 76.383773] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 76.383779] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 76.383785] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 76.383791] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.383792] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.383798] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.383799] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.383804] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.383807] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.383835] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
[ 76.383841] EDAC sbridge: Couldn't find mci handler
[ 76.383842] EDAC sbridge: Failed to register device with error -19.
[ 76.390468] intel_rapl_common: Found RAPL domain package
[ 76.487010] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.487021] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.487040] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 76.487045] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.487048] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.487052] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.487055] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.487059] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.487061] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.487066] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.487068] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.487072] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.487075] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.487079] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.487082] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.487086] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 76.487089] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 76.487095] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 76.487100] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 76.487106] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 76.487112] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 76.487118] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.487120] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.487125] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.487127] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.487132] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.487134] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.487159] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
[ 76.487164] EDAC sbridge: Couldn't find mci handler
[ 76.487165] EDAC sbridge: Failed to register device with error -19.
[ 76.500949] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:03:00.0 on minor 0
[ 76.640302] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.640312] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.640331] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 76.640337] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.640339] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.640344] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.640346] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.640351] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.640353] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.640358] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.640363] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.640367] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.640370] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.640375] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.640377] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.640390] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 76.640395] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 76.640401] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 76.640408] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 76.640414] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 76.640421] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 76.640426] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.640428] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.640433] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.640435] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.640440] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.640443] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.640473] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
[ 76.640478] EDAC sbridge: Couldn't find mci handler
[ 76.640479] EDAC sbridge: Failed to register device with error -19.
[ 76.757397] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.757413] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.757442] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 76.757461] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.757468] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.757483] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.757490] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.757504] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.757510] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.757520] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.757526] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.757536] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.757542] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.757552] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.757558] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.757568] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 76.757576] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 76.757590] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 76.757605] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 76.757619] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 76.757633] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 76.757648] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.757651] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.757664] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.757667] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.757680] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.757686] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.757735] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
[ 76.757743] EDAC sbridge: Couldn't find mci handler
[ 76.757745] EDAC sbridge: Failed to register device with error -19.
[ 76.850445] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.850452] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.850466] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 76.850471] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.850472] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.850476] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.850478] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.850481] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.850483] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.850486] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.850488] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.850492] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.850493] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.850497] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.850499] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.850502] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 76.850504] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 76.850509] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 76.850513] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 76.850518] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 76.850523] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 76.850527] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.850528] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.850532] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.850534] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.850538] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.850540] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.850559] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
[ 76.850561] EDAC sbridge: Couldn't find mci handler
[ 76.850562] EDAC sbridge: Failed to register device with error -19.
[ 76.970726] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.970737] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 76.970758] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 76.970772] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.970777] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 76.970788] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.970793] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 76.970804] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.970809] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 76.970820] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.970826] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 76.970836] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.970841] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 76.970852] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.970857] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 76.970868] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 76.970876] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 76.970890] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 76.970904] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 76.970918] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 76.970933] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 76.970947] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.970951] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 76.970964] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.970967] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 76.970979] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.970986] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 76.971034] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
[ 76.971041] EDAC sbridge: Couldn't find mci handler
[ 76.971043] EDAC sbridge: Failed to register device with error -19.
[ 77.034134] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 77.034149] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 77.034177] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 77.034196] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 77.034204] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 77.034218] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 77.034225] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 77.034240] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 77.034247] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 77.034261] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 77.034268] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 77.034282] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 77.034290] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 77.034304] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 77.034312] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 77.034326] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 77.034337] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 77.034356] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 77.034375] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 77.034391] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 77.034406] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 77.034420] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 77.034424] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 77.034436] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 77.034440] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 77.034453] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 77.034459] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 77.034515] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
[ 77.034522] EDAC sbridge: Couldn't find mci handler
[ 77.034524] EDAC sbridge: Failed to register device with error -19.
[ 77.101021] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 77.101036] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 77.101065] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 77.101085] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 77.101092] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 77.101107] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 77.101114] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 77.101129] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 77.101136] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 77.101151] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 77.101158] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 77.101173] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 77.101181] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 77.101195] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 77.101203] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 77.101217] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 77.101228] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 77.101247] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 77.101266] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 77.101285] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 77.101304] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 77.101322] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 77.101328] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 77.101344] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 77.101349] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 77.101366] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 77.101374] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 77.101447] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
[ 77.101459] EDAC sbridge: Couldn't find mci handler
[ 77.101462] EDAC sbridge: Failed to register device with error -19.
[ 77.237084] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 77.237091] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 77.237104] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 77.237109] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 77.237111] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 77.237114] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 77.237116] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 77.237120] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 77.237121] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 77.237125] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 77.237127] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 77.237130] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 77.237132] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 77.237135] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 77.237137] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 77.237141] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 77.237143] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 77.237147] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 77.237152] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 77.237157] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 77.237162] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 77.237166] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 77.237168] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 77.237172] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 77.237173] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 77.237177] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 77.237179] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 77.237198] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
[ 77.237203] EDAC sbridge: Couldn't find mci handler
[ 77.237203] EDAC sbridge: Failed to register device with error -19.
[ 78.425093] audit: type=1130 audit(1607160187.023:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-cryptsetup@storage comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 78.477325] audit: type=1130 audit(1607160187.076:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-fsck@dev-disk-by\x2duuid-cbd93b59\x2d605c\x2d46e5\x2db6fb\x2d3b90c5e00c6f comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 78.487194] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 78.720769] 8021q: 802.1Q VLAN Support v1.8
[ 78.725909] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 78.725910] Bluetooth: BNEP filters: protocol multicast
[ 78.725912] Bluetooth: BNEP socket layer initialized
[ 78.730175] NET: Registered protocol family 38
[ 78.780598] 8021q: adding VLAN 0 to HW filter on device enp6s0
[ 79.094962] NFSD: Using nfsdcld client tracking operations.
[ 79.094964] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000098)
[ 79.115915] input: ckb1: Corsair Gaming M65 Pro RGB Mouse vKB as /devices/virtual/input/input29
[ 79.140286] input: ckb1: Corsair Gaming M65 Pro RGB Mouse vM as /devices/virtual/input/input30
[ 79.170551] input: ckb2: Corsair K70 RGB Gaming Keyboard vKB as /devices/virtual/input/input31
[ 79.171045] input: ckb2: Corsair K70 RGB Gaming Keyboard vM as /devices/virtual/input/input32
[ 80.998434] kauditd_printk_skb: 41 callbacks suppressed
[ 80.998435] audit: type=1131 audit(1607160189.596:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 81.742174] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 81.742235] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 88.187396] audit: type=1100 audit(1607160196.786:67): pid=917 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="thewooster" exe="/usr/bin/login" hostname=bipolarrobot.bioticpenguins.science addr=? terminal=tty1 res=success'
[ 88.196543] audit: type=1101 audit(1607160196.793:68): pid=917 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/login" hostname=bipolarrobot.bioticpenguins.science addr=? terminal=tty1 res=success'
[ 88.198213] audit: type=1103 audit(1607160196.796:69): pid=917 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="thewooster" exe="/usr/bin/login" hostname=bipolarrobot.bioticpenguins.science addr=? terminal=tty1 res=success'
[ 88.198220] audit: type=1006 audit(1607160196.796:70): pid=917 uid=0 subj==unconfined old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[ 88.227009] audit: type=1130 audit(1607160196.826:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 88.234107] audit: type=1101 audit(1607160196.833:72): pid=1073 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 88.234129] audit: type=1103 audit(1607160196.833:73): pid=1073 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:setcred grantors=? acct="thewooster" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 88.234177] audit: type=1006 audit(1607160196.833:74): pid=1073 uid=0 subj==unconfined old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 88.235346] audit: type=1105 audit(1607160196.833:75): pid=1073 uid=0 auid=1000 ses=2 subj==unconfined msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="thewooster" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 88.240374] audit: type=1334 audit(1607160196.840:76): prog-id=11 op=LOAD
[ 91.503595] Bluetooth: RFCOMM TTY layer initialized
[ 91.503600] Bluetooth: RFCOMM socket layer initialized
[ 91.503606] Bluetooth: RFCOMM ver 1.11
[ 94.288786] kauditd_printk_skb: 6 callbacks suppressed
[ 94.288789] audit: type=1334 audit(1607160202.886:83): prog-id=12 op=LOAD
[ 94.288892] audit: type=1334 audit(1607160202.886:84): prog-id=13 op=LOAD
[ 94.550488] audit: type=1130 audit(1607160203.150:85): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 101.591326] audit: type=1130 audit(1607160210.190:86): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=sshd@0-10.10.0.101:22-10.15.0.150:36356 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 101.648001] audit: type=1101 audit(1607160210.246:87): pid=1991 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/sshd" hostname=10.15.0.150 addr=10.15.0.150 terminal=ssh res=success'
[ 101.649016] audit: type=1103 audit(1607160210.246:88): pid=1991 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="thewooster" exe="/usr/bin/sshd" hostname=10.15.0.150 addr=10.15.0.150 terminal=ssh res=success'
[ 101.649053] audit: type=1006 audit(1607160210.246:89): pid=1991 uid=0 subj==unconfined old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[ 101.659102] audit: type=1105 audit(1607160210.256:90): pid=1991 uid=0 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="thewooster" exe="/usr/bin/sshd" hostname=10.15.0.150 addr=10.15.0.150 terminal=ssh res=success'
[ 101.660867] audit: type=1103 audit(1607160210.260:91): pid=1993 uid=0 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="thewooster" exe="/usr/bin/sshd" hostname=10.15.0.150 addr=10.15.0.150 terminal=ssh res=success'
[ 108.801540] audit: type=1131 audit(1607160217.400:92): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 108.866660] audit: type=1334 audit(1607160217.466:93): prog-id=10 op=UNLOAD
[ 108.866663] audit: type=1334 audit(1607160217.466:94): prog-id=9 op=UNLOAD
[ 110.381503] audit: type=1105 audit(1607160218.572:95): pid=2282 uid=986 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:session_open grantors=pam_unix acct="thewooster" exe="/usr/NX/bin/nxexec" hostname=? addr=? terminal=ssh res=success'
[ 110.962201] audit: type=1105 audit(1607160219.152:96): pid=2357 uid=1000 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:session_open grantors=pam_limits acct="nx" exe="/usr/NX/bin/nxexec" hostname=? addr=? terminal=ssh res=success'
[ 115.968856] audit: type=1105 audit(1607160224.158:97): pid=2515 uid=1000 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:session_open grantors=pam_limits acct="nx" exe="/usr/NX/bin/nxexec" hostname=? addr=? terminal=ssh res=success'
[ 246.333614] audit: type=1101 audit(1607160354.525:98): pid=2778 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 246.333759] audit: type=1110 audit(1607160354.525:99): pid=2778 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 246.335587] audit: type=1105 audit(1607160354.525:100): pid=2778 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 273.560582] audit: type=1106 audit(1607160381.752:101): pid=2778 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 273.560607] audit: type=1104 audit(1607160381.752:102): pid=2778 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 278.548536] audit: type=1101 audit(1607160386.739:103): pid=6247 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 278.548814] audit: type=1110 audit(1607160386.739:104): pid=6247 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 278.551527] audit: type=1105 audit(1607160386.742:105): pid=6247 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 278.594679] audit: type=1106 audit(1607160386.785:106): pid=6247 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 278.594717] audit: type=1104 audit(1607160386.785:107): pid=6247 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 288.395957] audit: type=1101 audit(1607160396.585:108): pid=6267 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 288.396142] audit: type=1110 audit(1607160396.585:109): pid=6267 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 288.398408] audit: type=1105 audit(1607160396.589:110): pid=6267 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 290.609671] audit: type=1106 audit(1607160398.802:111): pid=6267 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 290.609712] audit: type=1104 audit(1607160398.802:112): pid=6267 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 292.793019] audit: type=1101 audit(1607160400.985:113): pid=6321 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 292.793184] audit: type=1110 audit(1607160400.985:114): pid=6321 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 292.795387] audit: type=1105 audit(1607160400.985:115): pid=6321 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 294.125385] audit: type=1106 audit(1607160402.315:116): pid=6321 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 294.125529] audit: type=1104 audit(1607160402.315:117): pid=6321 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 386.096603] audit: type=1101 audit(1607160494.284:118): pid=6514 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 386.097066] audit: type=1110 audit(1607160494.288:119): pid=6514 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 386.099530] audit: type=1105 audit(1607160494.288:120): pid=6514 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 386.104225] audit: type=1106 audit(1607160494.294:121): pid=6514 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 386.104288] audit: type=1104 audit(1607160494.294:122): pid=6514 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 408.861299] audit: type=1101 audit(1607160517.054:123): pid=6564 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 408.861420] audit: type=1110 audit(1607160517.054:124): pid=6564 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 408.863578] audit: type=1105 audit(1607160517.054:125): pid=6564 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 408.870156] audit: type=1106 audit(1607160517.061:126): pid=6564 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 408.870202] audit: type=1104 audit(1607160517.061:127): pid=6564 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 427.023415] audit: type=1101 audit(1607160535.214:128): pid=6596 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 427.023579] audit: type=1110 audit(1607160535.214:129): pid=6596 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 427.025865] audit: type=1105 audit(1607160535.217:130): pid=6596 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 427.031010] audit: type=1106 audit(1607160535.224:131): pid=6596 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 427.031031] audit: type=1104 audit(1607160535.224:132): pid=6596 uid=1000 auid=1000 ses=3 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 437.412103] audit: type=1130 audit(1607160545.604:133): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=sshd@1-10.10.0.101:22-10.15.0.150:36544 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 437.463811] audit: type=1101 audit(1607160545.654:134): pid=6617 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/sshd" hostname=10.15.0.150 addr=10.15.0.150 terminal=ssh res=success'
[ 437.464609] audit: type=1103 audit(1607160545.657:135): pid=6617 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="thewooster" exe="/usr/bin/sshd" hostname=10.15.0.150 addr=10.15.0.150 terminal=ssh res=success'
[ 437.464657] audit: type=1006 audit(1607160545.657:136): pid=6617 uid=0 subj==unconfined old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
[ 437.478265] audit: type=1105 audit(1607160545.671:137): pid=6617 uid=0 auid=1000 ses=4 subj==unconfined msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="thewooster" exe="/usr/bin/sshd" hostname=10.15.0.150 addr=10.15.0.150 terminal=ssh res=success'
[ 437.480044] audit: type=1103 audit(1607160545.671:138): pid=6619 uid=0 auid=1000 ses=4 subj==unconfined msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="thewooster" exe="/usr/bin/sshd" hostname=10.15.0.150 addr=10.15.0.150 terminal=ssh res=success'
[ 453.568640] audit: type=1101 audit(1607160561.761:139): pid=6858 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 453.568834] audit: type=1110 audit(1607160561.761:140): pid=6858 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 453.571222] audit: type=1105 audit(1607160561.764:141): pid=6858 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 457.825307] audit: type=1106 audit(1607160566.017:142): pid=6858 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 457.825498] audit: type=1104 audit(1607160566.017:143): pid=6858 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 531.473147] audit: type=1130 audit(1607160639.664:144): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=sysstat-collect comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 531.473177] audit: type=1131 audit(1607160639.664:145): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=sysstat-collect comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 903.744252] audit: type=1101 audit(1607161011.933:146): pid=7562 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 903.744371] audit: type=1110 audit(1607161011.933:147): pid=7562 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 903.746453] audit: type=1105 audit(1607161011.937:148): pid=7562 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 903.761789] audit: type=1106 audit(1607161011.953:149): pid=7562 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 903.761843] audit: type=1104 audit(1607161011.953:150): pid=7562 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 903.784737] audit: type=1130 audit(1607161011.977:151): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 903.784742] audit: type=1131 audit(1607161011.977:152): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 924.342129] audit: type=1101 audit(1607161032.533:153): pid=7601 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="thewooster" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 924.342250] audit: type=1110 audit(1607161032.533:154): pid=7601 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 924.345122] audit: type=1105 audit(1607161032.537:155): pid=7601 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 924.355418] audit: type=1106 audit(1607161032.547:156): pid=7601 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 924.355454] audit: type=1104 audit(1607161032.547:157): pid=7601 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 1131.474691] audit: type=1130 audit(1607161239.663:158): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=sysstat-collect comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1131.474713] audit: type=1131 audit(1607161239.663:159): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=sysstat-collect comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'Last edited by thewooster (2020-12-05 15:18:36)
Offline
#2 2020-12-05 09:48:48
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,678
Re: USB Devices Stopped working After upgrade [SOLVED]
However I am getting no input from mouse/keyboard.
Even not on "sudo libinput debug-events"?
Offline
#3 2020-12-05 09:53:48
- thewooster
- Member
- Registered: 2012-10-20
- Posts: 57
Re: USB Devices Stopped working After upgrade [SOLVED]
Output from libinput debug-events:
-event1 DEVICE_ADDED Power Button seat0 default group1 cap:k
-event0 DEVICE_ADDED Power Button seat0 default group2 cap:k
-event10 DEVICE_ADDED Wacom Intuos BT M Pen seat0 default group3 cap:T size 216x135mm
-event11 DEVICE_ADDED Wacom Intuos BT M Pad seat0 default group3 cap:P buttons:4 strips:0 rings:0 mode groups:1
-event5 DEVICE_ADDED Yubico Yubikey 4 OTP+U2F+CCID seat0 default group4 cap:k
-event2 DEVICE_ADDED ckb1: Corsair Gaming M65 Pro RGB Mouse vKB seat0 default group5 cap:kp left scroll-nat
-event3 DEVICE_ADDED ckb1: Corsair Gaming M65 Pro RGB Mouse vM seat0 default group6 cap:kp left scroll-nat scroll-button
-event4 DEVICE_ADDED ckb2: Corsair K70 RGB Gaming Keyboard vKB seat0 default group7 cap:kp left scroll-nat
-event6 DEVICE_ADDED ckb2: Corsair K70 RGB Gaming Keyboard vM seat0 default group8 cap:kp left scroll-nat scroll-buttonThis updates as I cick buttons etc, but the mouse doesn't move on my screen and I see no output to the screen from typing/hotkeys.
Offline
#4 2020-12-05 09:59:49
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,678
Re: USB Devices Stopped working After upgrade [SOLVED]
So it's more the X11 session - post the xorg log, elaborate on how you start it (xinit/startx?) and try a stripped down version (no WM, just like "startx xterm" or so)
Offline
#5 2020-12-05 10:12:07
- thewooster
- Member
- Registered: 2012-10-20
- Posts: 57
Re: USB Devices Stopped working After upgrade [SOLVED]
Xorg log:
[ 89.623] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 89.625]
X.Org X Server 1.20.10
X Protocol Version 11, Revision 0
[ 89.630] Build Operating System: Linux Arch Linux
[ 89.638] Current Operating System: Linux bipolarrobot.bioticpenguins.science 5.9.11-arch2-1 #1 SMP PREEMPT Sat, 28 Nov 2020 02:07:22 +0000 x86_64
[ 89.639] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/MyStorage-rootvol rw cryptdevice=UUID=3139f4fa-679a-4aef-a1be-9ff3488e24d0:MyStorage root=/dev/mapper/MyStorage-rootvol quiet rcutree.rcu_idle_gp_delay=1 apparmor=1 security=apparmor
[ 89.653] Build Date: 01 December 2020 07:51:57PM
[ 89.654]
[ 89.655] Current version of pixman: 0.40.0
[ 89.661] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 89.661] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 89.676] (==) Log file: "/home/thewooster/.local/share/xorg/Xorg.0.log", Time: Sat Dec 5 10:23:18 2020
[ 89.680] (==) Using config file: "/etc/X11/xorg.conf"
[ 89.683] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 89.684] (==) ServerLayout "Layout0"
[ 89.684] (**) |-->Screen "Screen0" (0)
[ 89.685] (**) | |-->Monitor "Monitor0"
[ 89.685] (**) | |-->Device "Device0"
[ 89.685] (**) |-->Input Device "Keyboard0"
[ 89.685] (**) |-->Input Device "Mouse0"
[ 89.685] (==) Automatically adding devices
[ 89.685] (==) Automatically enabling devices
[ 89.685] (==) Automatically adding GPU devices
[ 89.685] (==) Automatically binding GPU devices
[ 89.685] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 89.686] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 89.686] Entry deleted from font path.
[ 89.686] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 89.686] Entry deleted from font path.
[ 89.686] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1
[ 89.686] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 89.686] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 89.686] (WW) Disabling Keyboard0
[ 89.686] (WW) Disabling Mouse0
[ 89.686] (II) Module ABI versions:
[ 89.686] X.Org ANSI C Emulation: 0.4
[ 89.686] X.Org Video Driver: 24.1
[ 89.686] X.Org XInput driver : 24.1
[ 89.686] X.Org Server Extension : 10.0
[ 89.686] (++) using VT number 1
[ 89.688] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 89.688] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 89.689] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 89.692] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 89.694] (--) PCI:*(3@0:0:0) 10de:1b06:1043:85eb rev 161, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 89.694] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 89.694] (II) LoadModule: "glx"
[ 89.699] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 89.704] (II) Module glx: vendor="X.Org Foundation"
[ 89.704] compiled for 1.20.10, module version = 1.0.0
[ 89.704] ABI class: X.Org Server Extension, version 10.0
[ 89.704] (II) LoadModule: "nvidia"
[ 89.705] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 89.710] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 89.710] compiled for 1.6.99.901, module version = 1.0.0
[ 89.710] Module class: X.Org Video Driver
[ 89.711] (II) NVIDIA dlloader X Driver 455.45.01 Thu Nov 5 23:01:05 UTC 2020
[ 89.711] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 89.711] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 89.711] (II) systemd-logind: releasing fd for 226:0
[ 89.713] (II) Loading sub module "fb"
[ 89.713] (II) LoadModule: "fb"
[ 89.713] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 89.713] (II) Module fb: vendor="X.Org Foundation"
[ 89.713] compiled for 1.20.10, module version = 1.0.0
[ 89.713] ABI class: X.Org ANSI C Emulation, version 0.4
[ 89.713] (II) Loading sub module "wfb"
[ 89.713] (II) LoadModule: "wfb"
[ 89.714] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 89.714] (II) Module wfb: vendor="X.Org Foundation"
[ 89.714] compiled for 1.20.10, module version = 1.0.0
[ 89.714] ABI class: X.Org ANSI C Emulation, version 0.4
[ 89.714] (II) Loading sub module "ramdac"
[ 89.714] (II) LoadModule: "ramdac"
[ 89.714] (II) Module "ramdac" already built-in
[ 89.715] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 89.715] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 89.715] (==) NVIDIA(0): RGB weight 888
[ 89.715] (==) NVIDIA(0): Default visual is TrueColor
[ 89.715] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 89.716] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 89.716] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 89.716] (**) NVIDIA(0): Option "Coolbits" "8"
[ 89.716] (**) NVIDIA(0): Enabling 2D acceleration
[ 89.716] (II) Loading sub module "glxserver_nvidia"
[ 89.716] (II) LoadModule: "glxserver_nvidia"
[ 89.716] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 89.790] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 89.790] compiled for 1.6.99.901, module version = 1.0.0
[ 89.790] Module class: X.Org Server Extension
[ 89.790] (II) NVIDIA GLX Module 455.45.01 Thu Nov 5 22:58:18 UTC 2020
[ 89.792] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 89.793] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:3:0:0
[ 89.793] (--) NVIDIA(0): DFP-0 (boot)
[ 89.793] (--) NVIDIA(0): DFP-1
[ 89.793] (--) NVIDIA(0): DFP-2
[ 89.793] (--) NVIDIA(0): DFP-3
[ 89.793] (--) NVIDIA(0): DFP-4
[ 89.793] (--) NVIDIA(0): DFP-5
[ 89.793] (--) NVIDIA(0): DFP-6
[ 89.794] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1080 Ti (GP102-A) at PCI:3:0:0 (GPU-0)
[ 89.794] (--) NVIDIA(0): Memory: 11534336 kBytes
[ 89.794] (--) NVIDIA(0): VideoBIOS: 86.02.39.00.54
[ 89.794] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 89.808] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS PB278 (DFP-0): connected
[ 89.808] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS PB278 (DFP-0): Internal TMDS
[ 89.808] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS PB278 (DFP-0): 330.0 MHz maximum pixel clock
[ 89.808] (--) NVIDIA(GPU-0):
[ 89.808] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 89.808] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 89.808] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 89.808] (--) NVIDIA(GPU-0):
[ 89.809] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 89.809] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 89.809] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 89.809] (--) NVIDIA(GPU-0):
[ 89.809] (--) NVIDIA(GPU-0): AUS VG27A (DFP-3): connected
[ 89.809] (--) NVIDIA(GPU-0): AUS VG27A (DFP-3): Internal DisplayPort
[ 89.809] (--) NVIDIA(GPU-0): AUS VG27A (DFP-3): 1440.0 MHz maximum pixel clock
[ 89.809] (--) NVIDIA(GPU-0):
[ 89.810] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 89.810] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 89.810] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 89.810] (--) NVIDIA(GPU-0):
[ 89.810] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 89.810] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 89.810] (--) NVIDIA(GPU-0): DFP-5: 1440.0 MHz maximum pixel clock
[ 89.810] (--) NVIDIA(GPU-0):
[ 89.810] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 89.810] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[ 89.810] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[ 89.810] (--) NVIDIA(GPU-0):
[ 89.815] (==) NVIDIA(0):
[ 89.815] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 89.815] (==) NVIDIA(0): will be used as the requested mode.
[ 89.815] (==) NVIDIA(0):
[ 89.815] (II) NVIDIA(0): Validated MetaModes:
[ 89.815] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
[ 89.815] (II) NVIDIA(0): Virtual screen size determined to be 5120 x 1440
[ 89.819] (--) NVIDIA(0): DPI set to (108, 107); computed from "UseEdidDpi" X config
[ 89.819] (--) NVIDIA(0): option
[ 89.819] (WW) NVIDIA: Failed to bind sideband socket to
[ 89.819] (WW) NVIDIA: '/var/run/nvidia-xdriver-5bf2e5e8' Permission denied
[ 89.819] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[ 89.819] (II) NVIDIA: access.
[ 89.821] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 89.821] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 89.821] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 89.821] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 89.821] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 89.821] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 89.821] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 89.821] (II) NVIDIA(0): Config Options in the README.
[ 89.839] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
[ 89.952] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 89.952] (==) NVIDIA(0): Backing store enabled
[ 89.952] (==) NVIDIA(0): Silken mouse disabled
[ 89.953] (**) NVIDIA(0): DPMS enabled
[ 89.953] (II) Loading sub module "dri2"
[ 89.953] (II) LoadModule: "dri2"
[ 89.953] (II) Module "dri2" already built-in
[ 89.953] (II) NVIDIA(0): [DRI2] Setup complete
[ 89.953] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 89.954] (II) Initializing extension Generic Event Extension
[ 89.954] (II) Initializing extension SHAPE
[ 89.954] (II) Initializing extension MIT-SHM
[ 89.954] (II) Initializing extension XInputExtension
[ 89.954] (II) Initializing extension XTEST
[ 89.954] (II) Initializing extension BIG-REQUESTS
[ 89.954] (II) Initializing extension SYNC
[ 89.954] (II) Initializing extension XKEYBOARD
[ 89.954] (II) Initializing extension XC-MISC
[ 89.954] (II) Initializing extension SECURITY
[ 89.954] (II) Initializing extension XFIXES
[ 89.954] (II) Initializing extension RENDER
[ 89.954] (II) Initializing extension RANDR
[ 89.954] (II) Initializing extension COMPOSITE
[ 89.954] (II) Initializing extension DAMAGE
[ 89.954] (II) Initializing extension MIT-SCREEN-SAVER
[ 89.954] (II) Initializing extension DOUBLE-BUFFER
[ 89.954] (II) Initializing extension RECORD
[ 89.954] (II) Initializing extension DPMS
[ 89.954] (II) Initializing extension Present
[ 89.954] (II) Initializing extension DRI3
[ 89.954] (II) Initializing extension X-Resource
[ 89.954] (II) Initializing extension XVideo
[ 89.954] (II) Initializing extension XVideo-MotionCompensation
[ 89.954] (II) Initializing extension GLX
[ 89.955] (II) Initializing extension GLX
[ 89.955] (II) Indirect GLX disabled.
[ 89.955] (II) GLX: Another vendor is already registered for screen 0
[ 89.955] (II) Initializing extension XFree86-VidModeExtension
[ 89.955] (II) Initializing extension XFree86-DGA
[ 89.955] (II) Initializing extension XFree86-DRI
[ 89.955] (II) Initializing extension DRI2
[ 89.955] (II) Initializing extension NV-GLX
[ 89.955] (II) Initializing extension NV-CONTROL
[ 89.955] (II) Initializing extension XINERAMA
[ 90.012] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 90.012] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 90.012] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 90.012] (II) LoadModule: "libinput"
[ 90.012] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 90.015] (II) Module libinput: vendor="X.Org Foundation"
[ 90.015] compiled for 1.20.8, module version = 0.30.0
[ 90.015] Module class: X.Org XInput Driver
[ 90.015] ABI class: X.Org XInput driver, version 24.1
[ 90.015] (II) Using input driver 'libinput' for 'Power Button'
[ 90.016] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 29 paused 0
[ 90.016] (**) Power Button: always reports core events
[ 90.016] (**) Option "Device" "/dev/input/event1"
[ 90.016] (**) Option "_source" "server/udev"
[ 90.023] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 90.023] (II) event1 - Power Button: device is a keyboard
[ 90.023] (II) event1 - Power Button: device removed
[ 90.023] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 90.023] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 90.023] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 90.023] (II) event1 - Power Button: device is a keyboard
[ 90.024] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 90.024] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 90.024] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 90.024] (II) Using input driver 'libinput' for 'Power Button'
[ 90.024] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
[ 90.024] (**) Power Button: always reports core events
[ 90.024] (**) Option "Device" "/dev/input/event0"
[ 90.024] (**) Option "_source" "server/udev"
[ 90.025] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 90.025] (II) event0 - Power Button: device is a keyboard
[ 90.025] (II) event0 - Power Button: device removed
[ 90.025] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 90.025] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 90.026] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 90.026] (II) event0 - Power Button: device is a keyboard
[ 90.026] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 90.026] (II) No input driver specified, ignoring this device.
[ 90.026] (II) This device may have been added with another device file.
[ 90.026] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 90.026] (II) No input driver specified, ignoring this device.
[ 90.026] (II) This device may have been added with another device file.
[ 90.027] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 90.027] (II) No input driver specified, ignoring this device.
[ 90.027] (II) This device may have been added with another device file.
[ 90.027] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 90.027] (II) No input driver specified, ignoring this device.
[ 90.027] (II) This device may have been added with another device file.
[ 90.027] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event16)
[ 90.027] (II) No input driver specified, ignoring this device.
[ 90.027] (II) This device may have been added with another device file.
[ 90.027] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event17)
[ 90.027] (II) No input driver specified, ignoring this device.
[ 90.027] (II) This device may have been added with another device file.
[ 90.027] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=12 (/dev/input/event18)
[ 90.027] (II) No input driver specified, ignoring this device.
[ 90.027] (II) This device may have been added with another device file.
[ 90.028] (II) config/udev: Adding input device Wacom Intuos BT M Pen (/dev/input/event10)
[ 90.028] (**) Wacom Intuos BT M Pen: Applying InputClass "evdev tablet catchall"
[ 90.028] (**) Wacom Intuos BT M Pen: Applying InputClass "libinput tablet catchall"
[ 90.028] (**) Wacom Intuos BT M Pen: Applying InputClass "Wacom USB tablet class"
[ 90.028] (**) Wacom Intuos BT M Pen: Applying InputClass "Wacom tablet class"
[ 90.028] (II) LoadModule: "wacom"
[ 90.028] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 90.029] (II) Module wacom: vendor="X.Org Foundation"
[ 90.029] compiled for 1.20.8, module version = 0.39.0
[ 90.029] Module class: X.Org XInput Driver
[ 90.029] ABI class: X.Org XInput driver, version 24.1
[ 90.029] (II) Build version: 0.39.0
[ 90.029] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
DTU2231, DTU1631, DTH1152, DTH1152, DTK2451, DTH2452, DTH2452,
Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12, Intuos2 12x18,
Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2 2x3,
PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8, Intuos3 4x5,
Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19,
Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9, Intuos4 8x13,
Intuos4 12x19, Intuos4 WL USB Endpoint,
Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, Cintiq 27QHDT,
Cintiq 27QHDT, Mobilestudio Pro 13, MobileStudio Pro 16,
MobileStudio Pro 13, MobileStudio Pro 16, Cintiq 13 FHD Pro,
Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq 13 FHD Pro,
Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq Pro 24,
Mobilestudio Pro 13, MobileStudio Pro 16, MobileStudio Pro 13,
MobileStudio Pro 16, MobileStudio Pro 16, MobileStudio Pro 16,
TabletPC 0x90, TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A,
CapPlus 0x9F, TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5,
TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF,
TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116,
TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000,
TabletPC 0x5002, usb:172f:0024, usb:172f:0025, usb:172f:0026,
usb:172f:0027, usb:172f:0028, usb:172f:0030, usb:172f:0031,
usb:172f:0032, usb:172f:0033, usb:172f:0034, usb:172f:0035,
usb:172f:0036, usb:172f:0037, usb:172f:0038, usb:172f:0039,
usb:172f:0051, usb:172f:0052, usb:172f:0053, usb:172f:0054,
usb:172f:0055, usb:172f:0056, usb:172f:0057, usb:172f:0058,
usb:172f:0500, usb:172f:0501, usb:172f:0502, usb:172f:0503,
usb:1b96:0001, usb:17ef:6004
[ 90.029] (II) Using input driver 'wacom' for 'Wacom Intuos BT M Pen'
[ 90.086] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 33 paused 0
[ 90.086] (**) Wacom Intuos BT M Pen: always reports core events
[ 90.086] (**) Option "Device" "/dev/input/event10"
[ 90.086] (II) Wacom Intuos BT M Pen: type not specified, assuming 'stylus'.
[ 90.086] (II) Wacom Intuos BT M Pen: other types will be automatically added.
[ 90.086] (--) Wacom Intuos BT M Pen stylus: using pressure threshold of 851 for button 1
[ 90.086] (**) Wacom Intuos BT M Pen stylus: panscroll is 0
[ 90.086] (**) Wacom Intuos BT M Pen stylus: panscroll modified to 1300
[ 90.086] (--) Wacom Intuos BT M Pen stylus: maxX=21600 maxY=13500 maxZ=4095 resX=100000 resY=100000 tilt=enabled
[ 90.086] (II) Wacom Intuos BT M Pen stylus: hotplugging dependent devices.
[ 90.086] (EE) Wacom Intuos BT M Pen stylus: Invalid type 'touch' for this device.
[ 90.086] (EE) Wacom Intuos BT M Pen stylus: Invalid type 'pad' for this device.
[ 90.086] (II) Wacom Intuos BT M Pen stylus: hotplugging completed.
[ 90.086] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10:1.0/0003:056A:0378.0006/input/input10/event10"
[ 90.086] (II) XINPUT: Adding extended input device "Wacom Intuos BT M Pen stylus" (type: STYLUS, id 8)
[ 90.087] (**) Wacom Intuos BT M Pen stylus: (accel) keeping acceleration scheme 1
[ 90.087] (**) Wacom Intuos BT M Pen stylus: (accel) acceleration profile 0
[ 90.087] (**) Wacom Intuos BT M Pen stylus: (accel) acceleration factor: 2.000
[ 90.087] (**) Wacom Intuos BT M Pen stylus: (accel) acceleration threshold: 4
[ 90.087] (II) config/udev: Adding input device Wacom Intuos BT M Pen (/dev/input/mouse1)
[ 90.087] (II) No input driver specified, ignoring this device.
[ 90.087] (II) This device may have been added with another device file.
[ 90.087] (II) config/udev: Adding input device Wacom Intuos BT M Pad (/dev/input/event11)
[ 90.087] (**) Wacom Intuos BT M Pad: Applying InputClass "evdev tablet catchall"
[ 90.087] (**) Wacom Intuos BT M Pad: Applying InputClass "libinput tablet catchall"
[ 90.087] (**) Wacom Intuos BT M Pad: Applying InputClass "Wacom USB tablet class"
[ 90.087] (**) Wacom Intuos BT M Pad: Applying InputClass "Wacom tablet class"
[ 90.087] (II) Using input driver 'wacom' for 'Wacom Intuos BT M Pad'
[ 90.088] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 34 paused 0
[ 90.088] (**) Wacom Intuos BT M Pad: always reports core events
[ 90.088] (**) Option "Device" "/dev/input/event11"
[ 90.088] (EE) Wacom Intuos BT M Pad: Invalid type 'stylus' for this device.
[ 90.088] (EE) Wacom Intuos BT M Pad: Invalid type 'eraser' for this device.
[ 90.088] (EE) Wacom Intuos BT M Pad: Invalid type 'cursor' for this device.
[ 90.088] (EE) Wacom Intuos BT M Pad: Invalid type 'touch' for this device.
[ 90.088] (II) Wacom Intuos BT M Pad: type not specified, assuming 'pad'.
[ 90.088] (II) Wacom Intuos BT M Pad: other types will be automatically added.
[ 90.088] (**) Wacom Intuos BT M Pad pad: panscroll is 0
[ 90.088] (**) Wacom Intuos BT M Pad pad: panscroll modified to 13
[ 90.088] (II) Wacom Intuos BT M Pad pad: hotplugging dependent devices.
[ 90.088] (EE) Wacom Intuos BT M Pad pad: Invalid type 'stylus' for this device.
[ 90.088] (EE) Wacom Intuos BT M Pad pad: Invalid type 'eraser' for this device.
[ 90.088] (EE) Wacom Intuos BT M Pad pad: Invalid type 'cursor' for this device.
[ 90.088] (EE) Wacom Intuos BT M Pad pad: Invalid type 'touch' for this device.
[ 90.088] (II) Wacom Intuos BT M Pad pad: hotplugging completed.
[ 90.088] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10:1.0/0003:056A:0378.0006/input/input12/event11"
[ 90.088] (II) XINPUT: Adding extended input device "Wacom Intuos BT M Pad pad" (type: PAD, id 9)
[ 90.088] (**) Wacom Intuos BT M Pad pad: (accel) keeping acceleration scheme 1
[ 90.088] (**) Wacom Intuos BT M Pad pad: (accel) acceleration profile 0
[ 90.088] (**) Wacom Intuos BT M Pad pad: (accel) acceleration factor: 2.000
[ 90.088] (**) Wacom Intuos BT M Pad pad: (accel) acceleration threshold: 4
[ 90.089] (II) config/udev: Adding input device Wacom Intuos BT M Pad (/dev/input/js1)
[ 90.089] (II) No input driver specified, ignoring this device.
[ 90.089] (II) This device may have been added with another device file.
[ 90.089] (II) config/udev: Adding input device Yubico Yubikey 4 OTP+U2F+CCID (/dev/input/event5)
[ 90.089] (**) Yubico Yubikey 4 OTP+U2F+CCID: Applying InputClass "evdev keyboard catchall"
[ 90.089] (**) Yubico Yubikey 4 OTP+U2F+CCID: Applying InputClass "libinput keyboard catchall"
[ 90.089] (II) Using input driver 'libinput' for 'Yubico Yubikey 4 OTP+U2F+CCID'
[ 90.090] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 35 paused 0
[ 90.090] (**) Yubico Yubikey 4 OTP+U2F+CCID: always reports core events
[ 90.090] (**) Option "Device" "/dev/input/event5"
[ 90.090] (**) Option "_source" "server/udev"
[ 90.091] (II) event5 - Yubico Yubikey 4 OTP+U2F+CCID: is tagged by udev as: Keyboard
[ 90.091] (II) event5 - Yubico Yubikey 4 OTP+U2F+CCID: device is a keyboard
[ 90.092] (II) event5 - Yubico Yubikey 4 OTP+U2F+CCID: device removed
[ 90.092] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:1050:0407.0004/input/input5/event5"
[ 90.092] (II) XINPUT: Adding extended input device "Yubico Yubikey 4 OTP+U2F+CCID" (type: KEYBOARD, id 10)
[ 90.093] (II) event5 - Yubico Yubikey 4 OTP+U2F+CCID: is tagged by udev as: Keyboard
[ 90.093] (II) event5 - Yubico Yubikey 4 OTP+U2F+CCID: device is a keyboard
[ 90.093] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event19)
[ 90.093] (II) No input driver specified, ignoring this device.
[ 90.093] (II) This device may have been added with another device file.
[ 90.094] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event20)
[ 90.094] (II) No input driver specified, ignoring this device.
[ 90.094] (II) This device may have been added with another device file.
[ 90.094] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event21)
[ 90.094] (II) No input driver specified, ignoring this device.
[ 90.094] (II) This device may have been added with another device file.
[ 90.094] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event22)
[ 90.094] (II) No input driver specified, ignoring this device.
[ 90.094] (II) This device may have been added with another device file.
[ 90.095] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event23)
[ 90.095] (II) No input driver specified, ignoring this device.
[ 90.095] (II) This device may have been added with another device file.
[ 90.095] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event24)
[ 90.095] (II) No input driver specified, ignoring this device.
[ 90.095] (II) This device may have been added with another device file.
[ 90.095] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event25)
[ 90.095] (II) No input driver specified, ignoring this device.
[ 90.095] (II) This device may have been added with another device file.
[ 90.096] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event26)
[ 90.096] (II) No input driver specified, ignoring this device.
[ 90.096] (II) This device may have been added with another device file.
[ 90.096] (II) config/udev: Adding input device PC Speaker (/dev/input/event27)
[ 90.096] (II) No input driver specified, ignoring this device.
[ 90.096] (II) This device may have been added with another device file.
[ 90.097] (II) config/udev: Adding input device ckb1: Corsair Gaming M65 Pro RGB Mouse vKB (/dev/input/event2)
[ 90.097] (**) ckb1: Corsair Gaming M65 Pro RGB Mouse vKB: Applying InputClass "evdev pointer catchall"
[ 90.097] (**) ckb1: Corsair Gaming M65 Pro RGB Mouse vKB: Applying InputClass "evdev keyboard catchall"
[ 90.097] (**) ckb1: Corsair Gaming M65 Pro RGB Mouse vKB: Applying InputClass "libinput pointer catchall"
[ 90.097] (**) ckb1: Corsair Gaming M65 Pro RGB Mouse vKB: Applying InputClass "libinput keyboard catchall"
[ 90.097] (II) Using input driver 'libinput' for 'ckb1: Corsair Gaming M65 Pro RGB Mouse vKB'
[ 90.097] (EE) systemd-logind: failed to take device /dev/input/event2: No such device
[ 90.097] (**) ckb1: Corsair Gaming M65 Pro RGB Mouse vKB: always reports core events
[ 90.097] (**) Option "Device" "/dev/input/event2"
[ 90.097] (**) Option "_source" "server/udev"
[ 90.097] (EE) xf86OpenSerial: Cannot open device /dev/input/event2
Permission denied.
[ 90.097] (II) event2: opening input device '/dev/input/event2' failed (Permission denied).
[ 90.097] (II) event2 - failed to create input device '/dev/input/event2'.
[ 90.097] (EE) libinput: ckb1: Corsair Gaming M65 Pro RGB Mouse vKB: Failed to create a device for /dev/input/event2
[ 90.097] (EE) PreInit returned 2 for "ckb1: Corsair Gaming M65 Pro RGB Mouse vKB"
[ 90.097] (II) UnloadModule: "libinput"
[ 90.098] (II) config/udev: Adding input device ckb1: Corsair Gaming M65 Pro RGB Mouse vM (/dev/input/event3)
[ 90.098] (**) ckb1: Corsair Gaming M65 Pro RGB Mouse vM: Applying InputClass "evdev pointer catchall"
[ 90.098] (**) ckb1: Corsair Gaming M65 Pro RGB Mouse vM: Applying InputClass "evdev keyboard catchall"
[ 90.098] (**) ckb1: Corsair Gaming M65 Pro RGB Mouse vM: Applying InputClass "libinput pointer catchall"
[ 90.098] (**) ckb1: Corsair Gaming M65 Pro RGB Mouse vM: Applying InputClass "libinput keyboard catchall"
[ 90.098] (II) Using input driver 'libinput' for 'ckb1: Corsair Gaming M65 Pro RGB Mouse vM'
[ 90.098] (EE) systemd-logind: failed to take device /dev/input/event3: No such device
[ 90.098] (**) ckb1: Corsair Gaming M65 Pro RGB Mouse vM: always reports core events
[ 90.098] (**) Option "Device" "/dev/input/event3"
[ 90.098] (**) Option "_source" "server/udev"
[ 90.098] (EE) xf86OpenSerial: Cannot open device /dev/input/event3
Permission denied.
[ 90.098] (II) event3: opening input device '/dev/input/event3' failed (Permission denied).
[ 90.098] (II) event3 - failed to create input device '/dev/input/event3'.
[ 90.098] (EE) libinput: ckb1: Corsair Gaming M65 Pro RGB Mouse vM: Failed to create a device for /dev/input/event3
[ 90.098] (EE) PreInit returned 2 for "ckb1: Corsair Gaming M65 Pro RGB Mouse vM"
[ 90.098] (II) UnloadModule: "libinput"
[ 90.098] (II) config/udev: Adding input device ckb1: Corsair Gaming M65 Pro RGB Mouse vM (/dev/input/mouse0)
[ 90.098] (II) No input driver specified, ignoring this device.
[ 90.098] (II) This device may have been added with another device file.
[ 90.099] (II) config/udev: Adding input device ckb2: Corsair K70 RGB Gaming Keyboard vKB (/dev/input/event4)
[ 90.099] (**) ckb2: Corsair K70 RGB Gaming Keyboard vKB: Applying InputClass "evdev pointer catchall"
[ 90.099] (**) ckb2: Corsair K70 RGB Gaming Keyboard vKB: Applying InputClass "evdev keyboard catchall"
[ 90.099] (**) ckb2: Corsair K70 RGB Gaming Keyboard vKB: Applying InputClass "libinput pointer catchall"
[ 90.099] (**) ckb2: Corsair K70 RGB Gaming Keyboard vKB: Applying InputClass "libinput keyboard catchall"
[ 90.099] (II) Using input driver 'libinput' for 'ckb2: Corsair K70 RGB Gaming Keyboard vKB'
[ 90.099] (EE) systemd-logind: failed to take device /dev/input/event4: No such device
[ 90.099] (**) ckb2: Corsair K70 RGB Gaming Keyboard vKB: always reports core events
[ 90.099] (**) Option "Device" "/dev/input/event4"
[ 90.099] (**) Option "_source" "server/udev"
[ 90.099] (EE) xf86OpenSerial: Cannot open device /dev/input/event4
Permission denied.
[ 90.099] (II) event4: opening input device '/dev/input/event4' failed (Permission denied).
[ 90.099] (II) event4 - failed to create input device '/dev/input/event4'.
[ 90.099] (EE) libinput: ckb2: Corsair K70 RGB Gaming Keyboard vKB: Failed to create a device for /dev/input/event4
[ 90.099] (EE) PreInit returned 2 for "ckb2: Corsair K70 RGB Gaming Keyboard vKB"
[ 90.099] (II) UnloadModule: "libinput"
[ 90.100] (II) config/udev: Adding input device ckb2: Corsair K70 RGB Gaming Keyboard vM (/dev/input/event6)
[ 90.100] (**) ckb2: Corsair K70 RGB Gaming Keyboard vM: Applying InputClass "evdev pointer catchall"
[ 90.100] (**) ckb2: Corsair K70 RGB Gaming Keyboard vM: Applying InputClass "evdev keyboard catchall"
[ 90.100] (**) ckb2: Corsair K70 RGB Gaming Keyboard vM: Applying InputClass "libinput pointer catchall"
[ 90.100] (**) ckb2: Corsair K70 RGB Gaming Keyboard vM: Applying InputClass "libinput keyboard catchall"
[ 90.100] (II) Using input driver 'libinput' for 'ckb2: Corsair K70 RGB Gaming Keyboard vM'
[ 90.100] (EE) systemd-logind: failed to take device /dev/input/event6: No such device
[ 90.100] (**) ckb2: Corsair K70 RGB Gaming Keyboard vM: always reports core events
[ 90.100] (**) Option "Device" "/dev/input/event6"
[ 90.100] (**) Option "_source" "server/udev"
[ 90.100] (EE) xf86OpenSerial: Cannot open device /dev/input/event6
Permission denied.
[ 90.100] (II) event6: opening input device '/dev/input/event6' failed (Permission denied).
[ 90.100] (II) event6 - failed to create input device '/dev/input/event6'.
[ 90.100] (EE) libinput: ckb2: Corsair K70 RGB Gaming Keyboard vM: Failed to create a device for /dev/input/event6
[ 90.100] (EE) PreInit returned 2 for "ckb2: Corsair K70 RGB Gaming Keyboard vM"
[ 90.100] (II) UnloadModule: "libinput"
[ 90.100] (II) config/udev: Adding input device ckb2: Corsair K70 RGB Gaming Keyboard vM (/dev/input/mouse2)
[ 90.101] (II) No input driver specified, ignoring this device.
[ 90.101] (II) This device may have been added with another device file.
[ 90.103] (**) Wacom Intuos BT M Pen eraser: Applying InputClass "evdev tablet catchall"
[ 90.103] (**) Wacom Intuos BT M Pen eraser: Applying InputClass "libinput tablet catchall"
[ 90.103] (**) Wacom Intuos BT M Pen eraser: Applying InputClass "Wacom USB tablet class"
[ 90.103] (**) Wacom Intuos BT M Pen eraser: Applying InputClass "Wacom tablet class"
[ 90.103] (II) Using input driver 'wacom' for 'Wacom Intuos BT M Pen eraser'
[ 90.103] (II) systemd-logind: returning pre-existing fd for /dev/input/event10 13:74
[ 90.103] (**) Wacom Intuos BT M Pen eraser: always reports core events
[ 90.103] (**) Option "Device" "/dev/input/event10"
[ 90.103] (**) Option "Type" "eraser"
[ 90.103] (**) Wacom Intuos BT M Pen eraser: panscroll is 1300
[ 90.103] (**) Wacom Intuos BT M Pen eraser: panscroll modified to 1300
[ 90.103] (--) Wacom Intuos BT M Pen eraser: maxX=21600 maxY=13500 maxZ=4095 resX=100000 resY=100000 tilt=enabled
[ 90.103] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10:1.0/0003:056A:0378.0006/input/input10/event10"
[ 90.103] (II) XINPUT: Adding extended input device "Wacom Intuos BT M Pen eraser" (type: ERASER, id 11)
[ 90.103] (**) Wacom Intuos BT M Pen eraser: (accel) keeping acceleration scheme 1
[ 90.103] (**) Wacom Intuos BT M Pen eraser: (accel) acceleration profile 0
[ 90.103] (**) Wacom Intuos BT M Pen eraser: (accel) acceleration factor: 2.000
[ 90.103] (**) Wacom Intuos BT M Pen eraser: (accel) acceleration threshold: 4
[ 90.103] (**) Wacom Intuos BT M Pen cursor: Applying InputClass "evdev tablet catchall"
[ 90.103] (**) Wacom Intuos BT M Pen cursor: Applying InputClass "libinput tablet catchall"
[ 90.103] (**) Wacom Intuos BT M Pen cursor: Applying InputClass "Wacom USB tablet class"
[ 90.103] (**) Wacom Intuos BT M Pen cursor: Applying InputClass "Wacom tablet class"
[ 90.103] (II) Using input driver 'wacom' for 'Wacom Intuos BT M Pen cursor'
[ 90.103] (II) systemd-logind: returning pre-existing fd for /dev/input/event10 13:74
[ 90.103] (**) Wacom Intuos BT M Pen cursor: always reports core events
[ 90.103] (**) Option "Device" "/dev/input/event10"
[ 90.103] (**) Option "Type" "cursor"
[ 90.103] (**) Wacom Intuos BT M Pen cursor: panscroll is 1300
[ 90.103] (**) Wacom Intuos BT M Pen cursor: panscroll modified to 1300
[ 90.103] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10:1.0/0003:056A:0378.0006/input/input10/event10"
[ 90.103] (II) XINPUT: Adding extended input device "Wacom Intuos BT M Pen cursor" (type: CURSOR, id 12)
[ 90.103] (**) Wacom Intuos BT M Pen cursor: (accel) keeping acceleration scheme 1
[ 90.103] (**) Wacom Intuos BT M Pen cursor: (accel) acceleration profile 0
[ 90.103] (**) Wacom Intuos BT M Pen cursor: (accel) acceleration factor: 2.000
[ 90.103] (**) Wacom Intuos BT M Pen cursor: (accel) acceleration threshold: 4
[ 90.242] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @2560x1440 +0+0 {ViewPortIn=2560x1440, ViewPortOut=2560x1440+0+0}"
[ 90.392] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @2560x1440 +0+0 {ViewPortIn=2560x1440, ViewPortOut=2560x1440+0+0}, DP-0: 2560x1440_120 @2560x1440 +0+0 {ViewPortIn=2560x1440, ViewPortOut=2560x1440+0+0}"
[ 93.518] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS PB278 (DFP-0): connected
[ 93.518] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS PB278 (DFP-0): Internal TMDS
[ 93.518] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS PB278 (DFP-0): 330.0 MHz maximum pixel clock
[ 93.518] (--) NVIDIA(GPU-0):
[ 93.518] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 93.518] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 93.518] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 93.518] (--) NVIDIA(GPU-0):
[ 93.518] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 93.518] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 93.518] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 93.518] (--) NVIDIA(GPU-0):
[ 93.518] (--) NVIDIA(GPU-0): AUS VG27A (DFP-3): connected
[ 93.518] (--) NVIDIA(GPU-0): AUS VG27A (DFP-3): Internal DisplayPort
[ 93.518] (--) NVIDIA(GPU-0): AUS VG27A (DFP-3): 1440.0 MHz maximum pixel clock
[ 93.518] (--) NVIDIA(GPU-0):
[ 93.520] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 93.520] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 93.520] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 93.520] (--) NVIDIA(GPU-0):
[ 93.520] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 93.520] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 93.520] (--) NVIDIA(GPU-0): DFP-5: 1440.0 MHz maximum pixel clock
[ 93.520] (--) NVIDIA(GPU-0):
[ 93.520] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 93.520] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[ 93.520] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[ 93.520] (--) NVIDIA(GPU-0):
[ 108.036] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS PB278 (DFP-0): connected
[ 108.036] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS PB278 (DFP-0): Internal TMDS
[ 108.036] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS PB278 (DFP-0): 330.0 MHz maximum pixel clock
[ 108.036] (--) NVIDIA(GPU-0):
[ 108.036] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 108.036] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 108.036] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 108.036] (--) NVIDIA(GPU-0):
[ 108.036] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 108.036] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 108.036] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 108.036] (--) NVIDIA(GPU-0):
[ 108.037] (--) NVIDIA(GPU-0): AUS VG27A (DFP-3): connected
[ 108.037] (--) NVIDIA(GPU-0): AUS VG27A (DFP-3): Internal DisplayPort
[ 108.037] (--) NVIDIA(GPU-0): AUS VG27A (DFP-3): 1440.0 MHz maximum pixel clock
[ 108.037] (--) NVIDIA(GPU-0):
[ 108.038] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 108.038] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 108.038] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 108.038] (--) NVIDIA(GPU-0):
[ 108.038] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 108.038] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 108.038] (--) NVIDIA(GPU-0): DFP-5: 1440.0 MHz maximum pixel clock
[ 108.038] (--) NVIDIA(GPU-0):
[ 108.038] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 108.038] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[ 108.038] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[ 108.038] (--) NVIDIA(GPU-0):
[ 2313.987] (II) config/udev: Adding input device Corsair Corsair K70 RGB Gaming Keyboard (/dev/input/event4)
[ 2313.987] (**) Corsair Corsair K70 RGB Gaming Keyboard : Applying InputClass "evdev keyboard catchall"
[ 2313.987] (**) Corsair Corsair K70 RGB Gaming Keyboard : Applying InputClass "libinput keyboard catchall"
[ 2313.987] (II) Using input driver 'libinput' for 'Corsair Corsair K70 RGB Gaming Keyboard '
[ 2313.988] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 61 paused 0
[ 2313.988] (**) Corsair Corsair K70 RGB Gaming Keyboard : always reports core events
[ 2313.988] (**) Option "Device" "/dev/input/event4"
[ 2313.989] (**) Option "_source" "server/udev"
[ 2313.990] (II) event4 - Corsair Corsair K70 RGB Gaming Keyboard : is tagged by udev as: Keyboard
[ 2313.990] (II) event4 - Corsair Corsair K70 RGB Gaming Keyboard : device is a keyboard
[ 2313.991] (II) event4 - Corsair Corsair K70 RGB Gaming Keyboard : device removed
[ 2313.991] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:1B1C:1B13.0009/input/input33/event4"
[ 2313.991] (II) XINPUT: Adding extended input device "Corsair Corsair K70 RGB Gaming Keyboard " (type: KEYBOARD, id 13)
[ 2313.992] (II) event4 - Corsair Corsair K70 RGB Gaming Keyboard : is tagged by udev as: Keyboard
[ 2313.992] (II) event4 - Corsair Corsair K70 RGB Gaming Keyboard : device is a keyboard
[ 2315.227] (II) config/udev: removing device Corsair Corsair K70 RGB Gaming Keyboard
[ 2315.227] (**) Option "fd" "61"
[ 2315.227] (II) event4 - Corsair Corsair K70 RGB Gaming Keyboard : device removed
[ 2315.227] (II) UnloadModule: "libinput"
[ 2315.227] (II) systemd-logind: releasing fd for 13:68
[ 2321.427] (II) config/udev: Adding input device Corsair Corsair K70 RGB Gaming Keyboard Consumer Control (/dev/input/event6)
[ 2321.427] (**) Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 2321.427] (**) Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 2321.427] (II) Using input driver 'libinput' for 'Corsair Corsair K70 RGB Gaming Keyboard Consumer Control'
[ 2321.428] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 61 paused 0
[ 2321.428] (**) Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: always reports core events
[ 2321.428] (**) Option "Device" "/dev/input/event6"
[ 2321.428] (**) Option "_source" "server/udev"
[ 2321.429] (II) event6 - Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 2321.429] (II) event6 - Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: device is a keyboard
[ 2321.429] (II) event6 - Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: device removed
[ 2321.429] (II) libinput: Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: needs a virtual subdevice
[ 2321.429] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:1B1C:1B13.000A/input/input35/event6"
[ 2321.429] (II) XINPUT: Adding extended input device "Corsair Corsair K70 RGB Gaming Keyboard Consumer Control" (type: MOUSE, id 13)
[ 2321.429] (**) Option "AccelerationScheme" "none"
[ 2321.429] (**) Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: (accel) selected scheme none/0
[ 2321.429] (**) Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: (accel) acceleration factor: 2.000
[ 2321.429] (**) Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: (accel) acceleration threshold: 4
[ 2321.430] (II) event6 - Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 2321.430] (II) event6 - Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: device is a keyboard
[ 2321.431] (**) Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 2321.431] (**) Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 2321.431] (II) Using input driver 'libinput' for 'Corsair Corsair K70 RGB Gaming Keyboard Consumer Control'
[ 2321.431] (II) systemd-logind: returning pre-existing fd for /dev/input/event6 13:70
[ 2321.431] (**) Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: always reports core events
[ 2321.431] (**) Option "Device" "/dev/input/event6"
[ 2321.431] (**) Option "_source" "_driver/libinput"
[ 2321.431] (II) libinput: Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: is a virtual subdevice
[ 2321.431] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:1B1C:1B13.000A/input/input35/event6"
[ 2321.431] (II) XINPUT: Adding extended input device "Corsair Corsair K70 RGB Gaming Keyboard Consumer Control" (type: KEYBOARD, id 14)
[ 2321.438] (II) config/udev: Adding input device Corsair Corsair K70 RGB Gaming Keyboard (/dev/input/event7)
[ 2321.438] (II) No input driver specified, ignoring this device.
[ 2321.438] (II) This device may have been added with another device file.
[ 2321.452] (II) config/udev: Adding input device Corsair Corsair K70 RGB Gaming Keyboard (/dev/input/event8)
[ 2321.452] (II) No input driver specified, ignoring this device.
[ 2321.452] (II) This device may have been added with another device file.
[ 2321.456] (II) config/udev: Adding input device Corsair Corsair K70 RGB Gaming Keyboard Keyboard (/dev/input/event4)
[ 2321.456] (**) Corsair Corsair K70 RGB Gaming Keyboard Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2321.456] (**) Corsair Corsair K70 RGB Gaming Keyboard Keyboard: Applying InputClass "libinput keyboard catchall"
[ 2321.456] (II) Using input driver 'libinput' for 'Corsair Corsair K70 RGB Gaming Keyboard Keyboard'
[ 2321.457] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 62 paused 0
[ 2321.457] (**) Corsair Corsair K70 RGB Gaming Keyboard Keyboard: always reports core events
[ 2321.457] (**) Option "Device" "/dev/input/event4"
[ 2321.457] (**) Option "_source" "server/udev"
[ 2321.458] (II) event4 - Corsair Corsair K70 RGB Gaming Keyboard Keyboard: is tagged by udev as: Keyboard
[ 2321.458] (II) event4 - Corsair Corsair K70 RGB Gaming Keyboard Keyboard: device is a keyboard
[ 2321.459] (II) event4 - Corsair Corsair K70 RGB Gaming Keyboard Keyboard: device removed
[ 2321.459] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:1B1C:1B13.000A/input/input34/event4"
[ 2321.459] (II) XINPUT: Adding extended input device "Corsair Corsair K70 RGB Gaming Keyboard Keyboard" (type: KEYBOARD, id 15)
[ 2321.460] (II) event4 - Corsair Corsair K70 RGB Gaming Keyboard Keyboard: is tagged by udev as: Keyboard
[ 2321.460] (II) event4 - Corsair Corsair K70 RGB Gaming Keyboard Keyboard: device is a keyboard
[ 2321.694] (II) config/udev: removing device Corsair Corsair K70 RGB Gaming Keyboard Keyboard
[ 2321.694] (**) Option "fd" "62"
[ 2321.694] (II) event4 - Corsair Corsair K70 RGB Gaming Keyboard Keyboard: device removed
[ 2321.695] (II) UnloadModule: "libinput"
[ 2321.695] (II) systemd-logind: releasing fd for 13:68
[ 2321.766] (II) config/udev: Adding input device ckb2: Corsair K70 RGB Gaming Keyboard vM (/dev/input/mouse2)
[ 2321.766] (II) No input driver specified, ignoring this device.
[ 2321.766] (II) This device may have been added with another device file.
[ 2321.766] (II) config/udev: removing device Corsair Corsair K70 RGB Gaming Keyboard Consumer Control
[ 2321.766] (**) Option "fd" "61"
[ 2321.766] (II) UnloadModule: "libinput"
[ 2321.766] (II) systemd-logind: not releasing fd for 13:70, still in use
[ 2321.766] (II) config/udev: removing device Corsair Corsair K70 RGB Gaming Keyboard Consumer Control
[ 2321.766] (**) Option "fd" "61"
[ 2321.766] (II) event6 - Corsair Corsair K70 RGB Gaming Keyboard Consumer Control: device removed
[ 2321.767] (II) UnloadModule: "libinput"
[ 2321.767] (II) systemd-logind: releasing fd for 13:70
[ 2321.813] (II) config/udev: Adding input device ckb2: Corsair K70 RGB Gaming Keyboard vM (/dev/input/event6)
[ 2321.813] (**) ckb2: Corsair K70 RGB Gaming Keyboard vM: Applying InputClass "evdev pointer catchall"
[ 2321.813] (**) ckb2: Corsair K70 RGB Gaming Keyboard vM: Applying InputClass "evdev keyboard catchall"
[ 2321.813] (**) ckb2: Corsair K70 RGB Gaming Keyboard vM: Applying InputClass "libinput pointer catchall"
[ 2321.813] (**) ckb2: Corsair K70 RGB Gaming Keyboard vM: Applying InputClass "libinput keyboard catchall"
[ 2321.813] (II) Using input driver 'libinput' for 'ckb2: Corsair K70 RGB Gaming Keyboard vM'
[ 2321.814] (EE) systemd-logind: failed to take device /dev/input/event6: No such device
[ 2321.814] (**) ckb2: Corsair K70 RGB Gaming Keyboard vM: always reports core events
[ 2321.814] (**) Option "Device" "/dev/input/event6"
[ 2321.814] (**) Option "_source" "server/udev"
[ 2321.814] (EE) xf86OpenSerial: Cannot open device /dev/input/event6
Permission denied.
[ 2321.814] (II) event6: opening input device '/dev/input/event6' failed (Permission denied).
[ 2321.814] (II) event6 - failed to create input device '/dev/input/event6'.
[ 2321.814] (EE) libinput: ckb2: Corsair K70 RGB Gaming Keyboard vM: Failed to create a device for /dev/input/event6
[ 2321.814] (EE) PreInit returned 2 for "ckb2: Corsair K70 RGB Gaming Keyboard vM"
[ 2321.814] (II) UnloadModule: "libinput"
[ 2321.814] (II) config/udev: Adding input device ckb2: Corsair K70 RGB Gaming Keyboard vKB (/dev/input/event4)
[ 2321.814] (**) ckb2: Corsair K70 RGB Gaming Keyboard vKB: Applying InputClass "evdev pointer catchall"
[ 2321.814] (**) ckb2: Corsair K70 RGB Gaming Keyboard vKB: Applying InputClass "evdev keyboard catchall"
[ 2321.814] (**) ckb2: Corsair K70 RGB Gaming Keyboard vKB: Applying InputClass "libinput pointer catchall"
[ 2321.814] (**) ckb2: Corsair K70 RGB Gaming Keyboard vKB: Applying InputClass "libinput keyboard catchall"
[ 2321.815] (II) Using input driver 'libinput' for 'ckb2: Corsair K70 RGB Gaming Keyboard vKB'
[ 2321.815] (EE) systemd-logind: failed to take device /dev/input/event4: No such device
[ 2321.815] (**) ckb2: Corsair K70 RGB Gaming Keyboard vKB: always reports core events
[ 2321.815] (**) Option "Device" "/dev/input/event4"
[ 2321.815] (**) Option "_source" "server/udev"
[ 2321.815] (EE) xf86OpenSerial: Cannot open device /dev/input/event4
Permission denied.
[ 2321.815] (II) event4: opening input device '/dev/input/event4' failed (Permission denied).
[ 2321.815] (II) event4 - failed to create input device '/dev/input/event4'.
[ 2321.815] (EE) libinput: ckb2: Corsair K70 RGB Gaming Keyboard vKB: Failed to create a device for /dev/input/event4
[ 2321.815] (EE) PreInit returned 2 for "ckb2: Corsair K70 RGB Gaming Keyboard vKB"
[ 2321.815] (II) UnloadModule: "libinput"xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 440.82
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Coolbits" "8"
SubSection "Display"
Depth 24
EndSubSection
EndSectionOk, sudo I did find that running "sudo startx" will actually allow the mouse/keyboard to work for some reason.
Normally I am starting with just a "startx". So I should actually have adjusted my first post. I can get keyboard to login and "startx" when the system first boots. After that I am not able to use keyboard/mouse. As you said, it must be something with X11? I haven't changed anything before upgrade though so I'm not sure what it could be.
My .xinitrc looks like this:
exec i3 -c /home/thewooster/.config/i3/config
exec "xset -dpms"
exec --no-startup-id nitrogen --restore
exec "xset -dpmsxset s off"Also my i3-config. Nothing to special in there:
# It will not be overwritten, so edit it as you like.
#
# Should you change your keyboard layout some time, delete
# this file and re-run i3-config-wizard(1).
#
# i3 config file (v4)
#
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
set $mod Mod4
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:monospace 8
# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:DejaVu Sans Mono 8
# Before i3 v4.8, we used to recommend this one as the default:
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, its unicode glyph coverage is limited, the old
# X core fonts rendering does not support right-to-left and this being a bitmap
# font, it doesn’t scale on retina/hidpi displays.
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
# start a terminal
bindsym $mod+Return exec i3-sensible-terminal
# kill focused window
bindsym $mod+Shift+q kill
bindsym $mod+Shift+w exec xkill
# start dmenu (a program launcher)
bindsym $mod+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+semicolon focus right
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+semicolon move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in horizontal orientation
bindsym $mod+h split h
# split in vertical orientation
bindsym $mod+v split v
# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle
# focus the parent container
bindsym $mod+a focus parent
# Sreen brightness controls
bindsym XF86MonBrightnessUp exec xbacklight -inc 20 # increase screen brightness
bindsym XF86MonBrightnessDown exec xbacklight -dec 20 # decrease screen brightness
# # Touchpad controls
bindsym XF86TouchpadToggle exec /some/path/toggletouchpad.sh # toggle touchpad
# Media player controls
bindsym XF86AuioRaiseVolume exec --no-startup-id pactl set-sink-volume 1 +5% && killall -SIGUSR1 i3status
bindsym XF86AuioLowerVolume exec --no-startup-id pactl set-sink-volume 1 -5% && killall -SIGUSR1 i3status
bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute 1 toggle
bindsym XF86AudioPlay exec playerctl play-pause
bindsym XF86AudioNext exec playerctl next
bindsym XF86AudioPrev exec playerctl previous
# switch to workspace 0-10
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10
# switch to workspace 1-10
bindsym $mod+Control+1 workspace 11
bindsym $mod+Control+2 workspace 12
bindsym $mod+Control+3 workspace 13
bindsym $mod+Control+4 workspace 14
bindsym $mod+Control+5 workspace 15
bindsym $mod+Control+6 workspace 16
bindsym $mod+Control+7 workspace 17
bindsym $mod+Control+8 workspace 18
bindsym $mod+Control+9 workspace 19
bindsym $mod+Control+0 workspace 20
# move focused container to workspace 1-10
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10
# move focused container to workspace 1-10
bindsym $mod+Control+Shift+1 move container to workspace 11
bindsym $mod+Control+Shift+2 move container to workspace 12
bindsym $mod+Control+Shift+3 move container to workspace 13
bindsym $mod+Control+Shift+4 move container to workspace 14
bindsym $mod+Control+Shift+5 move container to workspace 15
bindsym $mod+Control+Shift+6 move container to workspace 16
bindsym $mod+Control+Shift+7 move container to workspace 17
bindsym $mod+Control+Shift+8 move container to workspace 18
bindsym $mod+Control+Shift+9 move container to workspace 19
bindsym $mod+Control+Shift+0 move container to workspace 20
# Start Applications Specific Workspace
exec --no-startup-id i3-msg 'workspace 1; exec /usr/bin/firefox'
exec --no-startup-id i3-msg 'workspace 3; exec terminator -e tmuxp load hs'
exec --no-startup-id i3-msg 'workspace 4; exec /usr/loca/bin/jopline'
exec --no-startup-id i3-msg 'workspace 10; exec /usr/bin/steam'
exec --no-startup-id i3-msg 'workspace 19; exec /usr/bin/spotify'
# Gaps
for_window [class="^.*"] border pixel 0
gaps inner 10
gaps outer 0
smart_gaps on
exec --no-startup-id nitrogen --restore
#hide_edge_borers on
# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window’s width.
# Pressing right will grow the window’s width.
# Pressing up will shrink the window’s height.
# Pressing down will grow the window’s height.
bindsym j resize shrink width 10 px or 10 ppt
bindsym k resize grow height 10 px or 10 ppt
bindsym l resize shrink height 10 px or 10 ppt
bindsym semicolon resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 10 px or 10 ppt
bindsym Down resize grow height 10 px or 10 ppt
bindsym Up resize shrink height 10 px or 10 ppt
bindsym Right resize grow width 10 px or 10 ppt
# back to normal: Enter or Escape
bindsym Return mode "default"
bindsym Escape mode "default"
}
bindsym $mod+r mode "resize"
# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
status_command py3status --config ~/.config/i3/i3status.conf
tray_output primary
}
# Assign workspaces
workspace "1" output DP-0
workspace "2" output DP-0
workspace "3" output DP-0
workspace "4" output DP-0
workspace "5" output DP-0
workspace "6" output DP-0
workspace "7" output DP-0
workspace "8" output DP-0
workspace "9" output DP-0
workspace "10" output DP-0
workspace "11" output DVI-D-0
workspace "12" output DVI-D-0
workspace "13" output DVI-D-0
workspace "14" output DVI-D-0
workspace "15" output DVI-D-0
workspace "16" output DVI-D-0
workspace "17" output DVI-D-0
workspace "18" output DVI-D-0
workspace "19" output DVI-D-0
workspace "20" output DVI-D-0
# Power Management
exec xset s off
exec xset -dpms
#
## Start compton
exec --no-startup-id compton
# Xrandr settings
exec_always xrandr --output DP-0 --mode 2560x1440 --pos 0x0 --rate 120 --rotate normal --primary
# Origin fix
for_window [instance="origin.exe"] floating enableLast edited by thewooster (2020-12-05 10:20:29)
Offline
#6 2020-12-05 10:29:51
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,678
Re: USB Devices Stopped working After upgrade [SOLVED]
Last link in my signature 
Also nb. that nothing after the first "exec" line in your xinitrc is executed.
Offline
#7 2020-12-05 11:20:30
- thewooster
- Member
- Registered: 2012-10-20
- Posts: 57
Re: USB Devices Stopped working After upgrade [SOLVED]
Hmmm, ok I apologize if I'm not following correctly.
So I tried a couple of things:
cp /etc/X11/xinit/xinitrc ~/.xinitrcto see if I could get mouse/keyboard with a basic session. Session started, but still no mouse/keyboard 
I then tried the same thing but added my exec to the bottom of .xinitrc:
exec i3 -c /home/thewooster/.config/i3/configand I have the same results as before.
Offline
#8 2020-12-05 14:00:29
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,678
Re: USB Devices Stopped working After upgrade [SOLVED]
Do you still have stuff like
[ 2321.815] (II) event4: opening input device '/dev/input/event4' failed (Permission denied).in your xorg log?
What's the output of "loginctl session-status" and what does your updated xinitrc look like?
Offline
#9 2020-12-05 14:13:52
- thewooster
- Member
- Registered: 2012-10-20
- Posts: 57
Re: USB Devices Stopped working After upgrade [SOLVED]
Output of loginctl session-status:
4 - thewooster (1000)
Since: Sat 2020-12-05 14:57:33 CET; 10min ago
Leader: 2744 (sshd)
TTY: pts/1
Remote: x.x.x.x
Service: sshd; type tty; class user
State: active
Unit: session-4.scope
├─2744 sshd: thewooster [priv]
├─2746 sshd: thewooster@pts/1
├─2747 -bash
├─3912 loginctl session-status
└─3913 lessCurrent .xinitrc:
#!/bin/sh
userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap
# merge in defaults and keymaps
if [ -f $sysresources ]; then
xrdb -merge $sysresources
fi
if [ -f $sysmodmap ]; then
xmodmap $sysmodmap
fi
if [ -f "$userresources" ]; then
xrdb -merge "$userresources"
fi
if [ -f "$usermodmap" ]; then
xmodmap "$usermodmap"
fi
# start some nice programs
if [ -d /etc/X11/xinit/xinitrc.d ] ; then
for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
[ -x "$f" ] && . "$f"
done
unset f
fi
exec i3 -c /home/thewooster/.config/i3/configI don't see any such errors in my Xorg logs.
PS I've tried uninstalling/re-installing nvidia as well as using linux-lts with no luck. I reverted those changes though.
**EDIT** - I also have apparmor enabled in the kernel, but I don't think that should matter?
apparmor=1 security=apparmorLast edited by thewooster (2020-12-05 14:24:17)
Offline
#10 2020-12-05 14:25:37
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,678
Re: USB Devices Stopped working After upgrade [SOLVED]
Leader: 2744 (sshd)Why isn't this a local shell?
(I'm pretty sure this is gonna be the cause)
Offline
#11 2020-12-05 14:30:02
- thewooster
- Member
- Registered: 2012-10-20
- Posts: 57
Re: USB Devices Stopped working After upgrade [SOLVED]
That's because I'm ssh-ing from my laptop. Since I can't get my keyboard/mouse to work with my desktop I'm ssh-ing to troubleshoot. If I run the same command from my desktop without doing "startx" here is the output:
1 - thewooster (1000)
Since: Sat 2020-12-05 14:54:54 CET; 33min ago
Leader: 897 (login)
Seat: seat0; vc1
TTY: tty1
Service: login; type tty; class user
State: active
Unit: session-1.scope
├─ 897 login -- thewooster
├─1064 -bash
├─1090 ssh-agent
└─4289 loginctl session-status
Dec 05 15:00: [hostname-removed] py3status[3292]: adding module wireless _first_
Dec 05 15:00:36 [hostname-removed] py3status[3292]: adding module ethernet _first_
Dec 05 15:00:36 [hostname-removed] py3status[3292]: adding module load
Dec 05 15:00:36 [hostname-removed] py3status[3292]: adding module battery 0
Dec 05 15:00:36 [hostname-removed] py3status[3292]: adding module battery 1
Dec 05 15:00:36 [hostname-removed] py3status[3292]: adding module tztime local
Dec 05 15:00:36 [hostname-removed] py3status[3292]: adding module volume master
Dec 05 15:00:36 [hostname-removed] py3status[3292]: i3status spawned using config file /tmp/py3status_8d5ecni6
Dec 05 15:00:36 [hostname-removed] py3status[3292]: modules include paths: []
Dec 05 15:00:43 [hostname-removed] py3status[3292]: received SIGTERMLast edited by thewooster (2020-12-05 14:34:04)
Offline
#12 2020-12-05 15:04:29
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,678
Re: USB Devices Stopped working After upgrade [SOLVED]
Hmmm…
See https://wiki.archlinux.org/index.php/Us … ser_groups
check eg.
getfacl /dev/input/event4 - does it belong to the "input" group?
Add yourself to that group.
=> Does input now work?
Then re-check getfacl from the (local) X11 session - does your user now have r/w access as well?
Offline
#13 2020-12-05 15:17:55
- thewooster
- Member
- Registered: 2012-10-20
- Posts: 57
Re: USB Devices Stopped working After upgrade [SOLVED]
NICE!!!!
I Added my user to the Input group, logged out and back in, now I have input!
Just for thoroughness here is the output of getfacl /dev/input/event4
# file: dev/input/event4
# owner: root
# group: input
user::rw-
group::rw-
other::---Thank you for all your help! I was a bit stumped 
.
Offline
#14 2020-12-05 15:42:01
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,678
Re: USB Devices Stopped working After upgrade [SOLVED]
Can you please check whether you've an active session on the same terminal w/ X11?
In doubt, try to adjust the xserverrc, https://wiki.archlinux.org/index.php/Xinit#xserverrc because this isn't how it's supposed to be (it's not bad, but there might be a bug)
Offline