You are not logged in.

Pages: 1

#1 2020-12-19 12:32:06

leedaz
Member
Registered: 2020-10-21
Posts: 8

[SOLVED] Cannot install any AUR packages.. bsdtar: Write error

Hi, 1st time posting here, hopefully not going to break any rules.

I'm getting this error tying to install any package from AUR.

==> Creating package "python-cheetah3"...
  -> Generating .PKGINFO file...
  -> Generating .BUILDINFO file...
  -> Generating .MTREE file...
  -> Compressing package...
Incorrect parameters 
bsdtar: Write error
==> ERROR: Failed to create package file.

I've tried changing build directory to one with lots of free space, same issue.
Also worth noting that Ark won't open pkg.tar.zst files, stating 'No suitable plugin found. Ark does not seem to support this file type'.
xarchiver also states 'Archive format is not recognised'.
Not sure if that has any bearing on issue.

I've downloaded packages several times, so not a corrupt download.
Any ideas ? Thanks.

Last edited by leedaz (2020-12-19 17:26:36)

Offline

#2 2020-12-19 12:33:00

Scimmia
Fellow
Registered: 2012-09-01
Posts: 12,093

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

pacman -Q libarchive ?

Online

#3 2020-12-19 13:30:54

leedaz
Member
Registered: 2020-10-21
Posts: 8

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

Scimmia wrote:

pacman -Q libarchive ?

[lee@archlap ~]$ pacman -Q libarchive
libarchive 3.5.0-1

Offline

#4 2020-12-19 14:32:53

archimboldo
Member
Registered: 2016-03-07
Posts: 232

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

Are you using an AUR helper? makepkg -si builds it correctly.

Last edited by archimboldo (2020-12-19 14:59:45)

Rules for problems.
Everyone has problems. Animals have problems. And buildings. And cats, and trees.
Problems are your friends. Treat them well.

Offline

#5 2020-12-19 14:41:35

Scimmia
Fellow
Registered: 2012-09-01
Posts: 12,093

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

type -a bsdtar ?
type -a zstd ?
pacman -Q zstd ?

Last edited by Scimmia (2020-12-19 14:43:17)

Online

#6 2020-12-19 15:02:55

leedaz
Member
Registered: 2020-10-21
Posts: 8

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

archimboldo wrote:

Are you using an AUR helper? makepkg -si builds it correctly.

No, makepkg -si is what I'm using.. Cant install helper, they are all in aur, and nothing will complete build

Offline

#7 2020-12-19 15:04:32

leedaz
Member
Registered: 2020-10-21
Posts: 8

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

Scimmia wrote:

type -a bsdtar ?
type -a zstd ?
pacman -Q zstd ?

[lee@archlap ~]$ type -a bsdtar
bsdtar is /usr/bin/bsdtar
[lee@archlap ~]$ type -a zstd
zstd is /usr/bin/zstd
[lee@archlap ~]$ pacman -Q zstd
zstd 1.4.5-1

Offline

#8 2020-12-19 15:36:33

seth
Member
Registered: 2012-09-03
Posts: 58,779

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

Generally consider not compressing temporary AUR packages at all, https://wiki.archlinux.org/index.php/Ma … algorithms

Does zstd work?

zstd -o /dev/null < <(echo foobarfoo)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2020-12-19 15:57:36

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 12,939

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

those look ok, please post your /etc/makepkg.conf

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#10 2020-12-19 16:57:20

leedaz
Member
Registered: 2020-10-21
Posts: 8

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

Lone_Wolf wrote:

those look ok, please post your /etc/makepkg.conf

#!/hint/bash
#
# /etc/makepkg.conf
#

#########################################################################
# SOURCE ACQUISITION
#########################################################################
#
#-- The download utilities that makepkg should use to acquire sources
#  Format: 'protocol::agent'
DLAGENTS=('file::/usr/bin/curl -gqC - -o %o %u'
          'ftp::/usr/bin/curl -gqfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
          'http::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
          'https::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
          'rsync::/usr/bin/rsync --no-motd -z %u %o'
          'scp::/usr/bin/scp -C %u %o')

# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget

#-- The package required by makepkg to download VCS sources
#  Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
            'git::git'
            'hg::mercurial'
            'svn::subversion')

#########################################################################
# ARCHITECTURE, COMPILE FLAGS
#########################################################################
#
CARCH="x86_64"
CHOST="x86_64-pc-linux-gnu"

#-- Compiler and Linker Flags
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
#RUSTFLAGS="-C opt-level=2"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
#DEBUG_RUSTFLAGS="-C debuginfo=2"

#########################################################################
# BUILD ENVIRONMENT
#########################################################################
#
# Defaults: BUILDENV=(!distcc !color !ccache check !sign)
#  A negated environment option will do the opposite of the comments below.
#
#-- distcc:   Use the Distributed C/C++/ObjC compiler
#-- color:    Colorize output messages
#-- ccache:   Use ccache to cache compilation
#-- check:    Run the check() function if present in the PKGBUILD
#-- sign:     Generate PGP signature file
#
BUILDENV=(!distcc color !ccache check !sign)
#
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#
#-- Specify a directory for package building.
BUILDDIR=/tmp/makepkg

#########################################################################
# GLOBAL PACKAGE OPTIONS
#   These are default values for the options=() settings
#########################################################################
#
# Default: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug)
#  A negated option will do the opposite of the comments below.
#
#-- strip:      Strip symbols from binaries/libraries
#-- docs:       Save doc directories specified by DOC_DIRS
#-- libtool:    Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs:  Leave empty directories in packages
#-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge:      Remove files specified by PURGE_TARGETS
#-- debug:      Add debugging flags as specified in DEBUG_* variables
#
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug)

#-- File integrity checks to use. Valid: md5, sha1, sha224, sha256, sha384, sha512, b2
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
#-- Directory to store source code in for debug packages
DBGSRCDIR="/usr/src/debug"

#########################################################################
# PACKAGE OUTPUT
#########################################################################
#
# Default: put built package and cached source in build directory
#
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <john@doe.com>"
#-- Specify a key to use for package signing
#GPGKEY=""

#########################################################################
# COMPRESSION DEFAULTS
#########################################################################
#
COMPRESSGZ=(pigz -c -f -n)
COMPRESSBZ2=(pbzip2 -c -f)
COMPRESSXZ=(xz -c -z - --threads=0)
COMPRESSZST=(zstd -c -z -q ---threads=0)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
COMPRESSLZ4=(lz4 -q)
COMPRESSLZ=(lzip -c -f)

#########################################################################
# EXTENSION DEFAULTS
#########################################################################
#
PKGEXT='.pkg.tar.zst'
SRCEXT='.src.tar.gz'

Offline

#11 2020-12-19 17:01:04

Scimmia
Fellow
Registered: 2012-09-01
Posts: 12,093

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

Good call, Lone_Wolf.

leedaz, COMPRESSZST has been customized and is not valid. See https://github.com/archlinux/svntogit-p … kepkg.conf

Last edited by Scimmia (2020-12-19 17:01:45)

Online

#12 2020-12-19 17:15:20

leedaz
Member
Registered: 2020-10-21
Posts: 8

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

OK, thanks Scimmia and Lone_Wolf.

I did edit /etc/makepkg.conf according to the Arch Wiki..

https://wiki.archlinux.org/index.php/Ma … algorithms

What gives ? Is Arch wiki wrong ? Forgive me, I'm quite new to Arch.

*Edit. I spotted an error, missed a space there. doh. I'll put it right, and everything should be good.

Last edited by leedaz (2020-12-19 17:17:39)

Offline

#13 2020-12-19 17:15:54

Scimmia
Fellow
Registered: 2012-09-01
Posts: 12,093

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

You missed a space

Online

#14 2020-12-19 17:18:19

leedaz
Member
Registered: 2020-10-21
Posts: 8

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

Scimmia wrote:

You missed a space

Yup, got it now. Thanks all. i'll give it a quick test and mark as solved.

Offline

#15 2020-12-19 17:21:50

leedaz
Member
Registered: 2020-10-21
Posts: 8

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

[sudo] password for lee: 
loading packages...
resolving dependencies...
looking for conflicting packages...

Packages (2) python-cheetah3-3.2.5-5  python2-cheetah3-3.2.5-5

Total Installed Size:  3.83 MiB

:: Proceed with installation? [Y/n] 
(2/2) checking keys in keyring                                                                       [###########################################################] 100%
(2/2) checking package integrity                                                                     [###########################################################] 100%
(2/2) loading package files                                                                          [###########################################################] 100%
(2/2) checking for file conflicts                                                                    [###########################################################] 100%
(2/2) checking available disk space                                                                  [###########################################################] 100%
:: Processing package changes...
(1/2) installing python-cheetah3                                                                     [###########################################################] 100%
Optional dependencies for python-cheetah3
    python-markdown
(2/2) installing python2-cheetah3                                                                    [###########################################################] 100%
Optional dependencies for python2-cheetah3
    python2-markdown
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...
[lee@archlap python-cheetah3]$

Thanks guys, should have noticed that myself I suppose. appreciate the help.

Offline

#16 2020-12-19 17:23:28

qinohe
Member
From: Netherlands
Registered: 2012-06-20
Posts: 1,494

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

I get why you set '--threads=0' (man zstd) but makepkg.conf has it's own setting for it 'MAKEFLAGS='.
If you set it to 'MAKEFLAGS="-j$(nproc)"' you will get what you want, the number phy.cores detected (see) man makepkg.conf.

Offline

#17 2020-12-19 17:38:59

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,330
Website

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

No, qinohe, one is for setting the number of cores used fore `make` and the other for `zst` which is doing the compression.  Zst does not read MAKEFLAGS from the environment (as it isn't `make`) and even if it did, -j# is not a valid zst flag.

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#18 2020-12-19 19:43:23

qinohe
Member
From: Netherlands
Registered: 2012-06-20
Posts: 1,494

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

Ah, of course ... thanks for explaining, thought the solution was valid for anything in makepkg.conf, wrong assumption..

Offline

#19 2020-12-21 19:25:42

GSMiller
Member
Registered: 2020-11-23
Posts: 75

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

leedaz wrote:

[

COMPRESSZST=(zstd -c -z -q ---threads=0)

There are 3 dashes.

A dog is a man's best friend.

Offline

#20 2020-12-22 02:47:35

Scimmia
Fellow
Registered: 2012-09-01
Posts: 12,093

Re: [SOLVED] Cannot install any AUR packages.. bsdtar: Write error

Trilbyfan wrote:
leedaz wrote:

[

COMPRESSZST=(zstd -c -z -q ---threads=0)

There are 3 dashes.

Which is correct, as you'd see with the link given and the discussion. This is already solved.

Online

Pages: 1

Board footer

Powered by FluxBB