You are not logged in.
I'd like to use my integrated IGP and only turn on my radeon when needed and use it via PRIME.
Right know it uses 9Wh basically doing nothing, the fan is off too:
root@slimer# sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +38.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +37.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +37.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +37.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +36.0°C (high = +80.0°C, crit = +100.0°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
amdgpu-pci-0300
Adapter: PCI adapter
vddgfx: 775.00 mV
fan1: 0 RPM (min = 0 RPM, max = 3200 RPM)
edge: +44.0°C (crit = +100.0°C, hyst = -273.1°C)
(emerg = +105.0°C)
junction: +44.0°C (crit = +110.0°C, hyst = -273.1°C)
(emerg = +115.0°C)
mem: +44.0°C (crit = +105.0°C, hyst = -273.1°C)
(emerg = +110.0°C)
power1: 9.00 W (cap = 160.00 W)Would it be possible to turn it completely off or somehow limit his power consumption when idle even further?
Thanks!
--edit--
I don't know if this is relevant:
root@slimer# cat /sys/class/drm/card1/device/power/runtime_status
suspendedDoes it means the card isn't using any power?
Anytime check the current power usage via the sensors command, the state switches to "active".
Maybe is just a non-existing problem?
Last edited by kokoko3k (2020-12-27 15:29:09)
Help me to improve ssh-rdp !
Retroarch User? Try my koko-aio shader !
Offline
When the videocard is connected to the mainboard and powersupply it will allways take some power. This will be a small amount but there is nothing you can do about it, this is unless you can physically disconnect it completely
Last edited by Archlin (2020-12-29 13:02:11)
Offline
Check overall system draw with powertop, if it's within reason I wouldn't worry too much about it.
Offline
Thanks, but it is a desktop system and powertop just gives me a wrong estimation (3 Wh for the whole thing).
Last edited by kokoko3k (2020-12-30 06:34:19)
Help me to improve ssh-rdp !
Retroarch User? Try my koko-aio shader !
Offline