Arch Linux

Velitar

Member

Registered: 2020-10-20

Posts: 12

SD card reader does not work

When I put a SD card into reader in my Acer aspire tc-885-ua92 laptop, I get following message from dmesg:

[   40.179688] mmc0: cannot verify signal voltage switch
[   40.623538] mmc0: tuning execution failed: -22
[   40.623542] mmc0: error -22 whilst initialising SD card
[   41.462547] mmc0: cannot verify signal voltage switch
[   41.905681] mmc0: tuning execution failed: -22
[   41.905685] mmc0: error -22 whilst initialising SD card
[   42.743639] mmc0: cannot verify signal voltage switch
[   43.505253] mmc0: tuning execution failed: -22
[   43.505257] mmc0: error -22 whilst initialising SD card

I also tried to install rts_bpp but it does not help, even with blacklisted rtsx_pci.
When I blacklisted rtsx_pci I got absolutely nothing, not even the error in dmesg when I inserted  a  card.

uname -a output:

Linux (hostname) 5.10.4-arch2-1 #1 SMP PREEMPT Fri, 01 Jan 2021 05:29:53 +0000 x86_64 GNU/Linux 

lspci output:

00:00.0 Host bridge: Intel Corporation Coffee Lake HOST and DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (Whiskey Lake)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Cannon Point-LP Thermal Controller (rev 30)
00:14.0 USB controller: Intel Corporation Cannon Point-LP USB 3.1 xHCI Controller (rev 30)
00:14.2 RAM memory: Intel Corporation Cannon Point-LP Shared SRAM (rev 30)
00:14.3 Network controller: Intel Corporation Cannon Point-LP CNVi [Wireless-AC] (rev 30)
00:15.0 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP Serial IO I2C Controller #0 (rev 30)
00:15.1 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP Serial IO I2C Controller #1 (rev 30)
00:16.0 Communication controller: Intel Corporation Cannon Point-LP MEI Controller #1 (rev 30)
00:17.0 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 30)
00:1c.0 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root Port #5 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root Port #9 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Cannon Point-LP LPC Controller (rev 30)
00:1f.3 Audio device: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 30)
00:1f.4 SMBus: Intel Corporation Cannon Point-LP SMBus Controller (rev 30)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP SPI Controller (rev 30)
01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce MX130] (rev a2)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader (rev 01)
02:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)

full dmesg output