You are not logged in.
Recently I've faced an issue with my internal microphone on the laptop Asus G14 (Arch 5.10.5).
It stopped working.
The pavucontrol shows it as "unplugged". The interesting part is that if I put something inside the headphone jack
(such that it will touch the entrance pin but not the mic pin, or just put headphones correctly and press the hardware button that cuts out headphone mic)
then the internal mic work perfectly.
Is there a way to "reload" the jack or to tell my laptop that the internal microphone is plugged in.
P.S. I have tried the following:
1 Moved all slides in alsamixer with no help.
2.
alsactl restore3. Created /etc/modprobe.d/alsa-base.conf (deleted later)
4.
pacmd set-source-port alsa_input.pci-0000_04_00.6.analog-stereo analog-input-internal-micpacmd list-sources
4 source(s) available.
index: 0
name: <alsa_output.pci-0000_04_00.6.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1030
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 100.14 ms
monitor_of: 0
card: 1 <alsa_card.pci-0000_04_00.6>
module: 7
properties:
device.description = "Monitor of Family 17h (Models 10h-1fh) HD Audio Controller Analog Stereo"
device.class = "monitor"
alsa.card = "3"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfc5c0000 irq 89"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:04:00.6"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card3"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e3"
device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
device.string = "3"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 1
name: <alsa_input.pci-0000_04_00.6.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 99957 / 153% / 11.00 dB, front-right: 99957 / 153% / 11.00 dB
balance 0.00
base volume: 6554 / 10% / -60.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 100.14 ms
card: 1 <alsa_card.pci-0000_04_00.6>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC289 Analog"
alsa.id = "ALC289 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "3"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfc5c0000 irq 89"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:04:00.6"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card3"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e3"
device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
device.string = "front:3"
device.buffering.buffer_size = "17664"
device.buffering.fragment_size = "2944"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Family 17h (Models 10h-1fh) HD Audio Controller Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
active port: <analog-input-internal-mic>
index: 2
name: <alsa_output.platform-snd_aloop.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1000
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 1
card: 2 <alsa_card.platform-snd_aloop.0>
module: 8
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "Loopback"
alsa.long_card_name = "Loopback 1"
alsa.driver_name = "snd_aloop"
device.bus_path = "platform-snd_aloop.0"
sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
index: 3
name: <alsa_input.platform-snd_aloop.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9009
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 2 <alsa_card.platform-snd_aloop.0>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Loopback PCM"
alsa.id = "Loopback PCM"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "Loopback"
alsa.long_card_name = "Loopback 1"
alsa.driver_name = "snd_aloop"
device.bus_path = "platform-snd_aloop.0"
sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "352800"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
ports:
analog-input: Analog Input (priority 10000, latency offset 0 usec, available: unknown)
properties:
active port: <analog-input>Any help/guidance would be appreciated.
Last edited by Cashey (2021-01-10 09:18:27)
Offline
There is also an issue with the headphone mic.
There is no indication of such in pavucontrol at all.
So the 2 additional questions:
1. Is there any codec for the card ALC289?
2. Is it possible to fully reload my sound card for linux (to imitate fresh install)? (as my mic worked perfectly a week ago)
Last edited by Cashey (2021-01-11 19:08:50)
Offline
Unfortunately, I cannot give the correct solution to the problem.
Yet, I can tell what have I done before the issue disappeared.
1. I installed alsa-tools for the hdajackretask.
2. I turned on hdajackretask with sudo, and try to rewrite random pins to "internal mic" applied by "Install boot override" - nothing worked.
3. Then I gave up and deleted all modification in hdajackretask via "Remove boot override" and the shuted down the computer (at some forum I read that it is important to shut down not reboot).
And suddenly everything works now.
P.S. I think there is no need to add flag "SOLVED" to the post.
Offline