You are not logged in.

#51 2020-12-10 15:47:32

toki1990
Member
Registered: 2019-11-03
Posts: 15

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

SupKurtJ wrote:
toki1990 wrote:
SupKurtJ wrote:

So you can just disable IOMMU for now on the bios.

I've sent an email to AMD, and they did not reply me.

Are you sure it is the version 1.1.8.0 ? Because the last version is 1.1.0.0 D...

i tried IOMMU. not solution.

screenshot of my uefi screen:

https://ibb.co/GVLZ1xG

Your screenshot doesn't work...

https://imgur.com/CKpjgYv

Offline

#52 2020-12-20 17:32:35

Riggs
Member
Registered: 2020-12-20
Posts: 1

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

toki1990 wrote:
SupKurtJ wrote:
toki1990 wrote:

i have same problem with 'asus tuf gaming b450m pro s,  ryzen 7 3700x'. boot showing "no irq handler for vector" message for 9-10 times. i'm using kernel 5.10rc5. i'm using last bios of my motherboard. i'm using bios Version 2409.
pls focus. my bios agesa is combov2 1.1.8.0. newer than 1.1.0.0.c

i'm tried acpi=noirq. "no irq handler for vector" message is gone. but i have random reboots again.

So you can just disable IOMMU for now on the bios.

I've sent an email to AMD, and they did not reply me.

Are you sure it is the version 1.1.8.0 ? Because the last version is 1.1.0.0 D...

i tried IOMMU. not solution.

screenshot of my uefi screen:

https://ibb.co/GVLZ1xG

You can try add this to boot: “noapic"

Hope helps

Offline

#53 2020-12-21 02:19:55

TheCraiggers
Member
Registered: 2014-04-29
Posts: 14

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

Turning off the IOMMU and/or APIC seems to be a big deal for something that doesn't seem to be causing issues as far as anybody can tell. Has anybody actually noticed system instability from this?

Offline

#54 2020-12-21 10:52:06

mabod
Member
Registered: 2016-09-09
Posts: 4

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

No. I havent noticed any negative effects regarding these messages.

Deactivating the IOMMU in the BIOS is not a big deal from my point of view. Simple office PCs hardly use the IOMMU. It is mainly used for virtual environments and passthrough of hardware (GPU etc.). That is probably the reason why nobody has reported side effects of these error messages so far. May be somebody who is doing GPU passthrough with qemu will notice something.

Anyways, I have deactivate IOMMU in BIOS and all is good.

Offline

#55 2020-12-23 19:40:53

toki1990
Member
Registered: 2019-11-03
Posts: 15

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

Riggs wrote:
toki1990 wrote:
SupKurtJ wrote:

So you can just disable IOMMU for now on the bios.

I've sent an email to AMD, and they did not reply me.

Are you sure it is the version 1.1.8.0 ? Because the last version is 1.1.0.0 D...

i tried IOMMU. not solution.

screenshot of my uefi screen:

https://ibb.co/GVLZ1xG

You can try add this to boot: “noapic"

Hope helps

i tried. not solution. but thanks for reply. no irq handler for vector message is cleaned. but boot sometimes stuck. i tried linux-next-git kernel. its showing mce hardware error when booting.

Last edited by toki1990 (2021-01-04 20:23:44)

Offline

#56 2021-01-01 17:19:05

toki1990
Member
Registered: 2019-11-03
Posts: 15

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

i tried agesa 1.1.9.0 included last beta bios of my motherboard ( tuf gaming b450m pro s ). this bios not including fix ( v2601 ). i'm changed my cpu. My new cpu is ryzen 9 5900x. there is no random reboots. but linux system sometimes stuck at boot.

Last edited by toki1990 (2021-01-01 17:19:35)

Offline

#57 2021-01-05 06:14:19

mabod
Member
Registered: 2016-09-09
Posts: 4

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

I just updated my BIOS to the latest beta version with AEGESA 1.1.9.0 and the boot messages "No irq handler for vector" are all gone. The journal is clean.

mobo: MSI MPG X570 GAMING EDGE WIFI
BIOS: 7C37v1D2(Beta version) (2021-01-04)

Offline

#58 2021-01-07 10:06:22

SupKurtJ
Member
Registered: 2015-07-18
Posts: 31

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

Gigabyte bios still on 1.1.0.0 D .... I have to wait for this version AGESA 1.1.9.0 and confirm if this version solve this trouble.

Offline

#59 2021-01-07 17:19:52

ratcheer
Member
Registered: 2011-10-09
Posts: 802

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

I just got a new BIOS for my Asus TUF X-570 motherboard, version 3202 dated 01/04/21. I still get the IRQ handler messages when booting.

But, at least my PC will now reboot.

Offline

#60 2021-01-07 21:04:37

toki1990
Member
Registered: 2019-11-03
Posts: 15

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

i tried lastest agesa 1.1.9.0 included bios (v2602) for my "tuf gaming b450m pro s". not solution.

Offline

#61 2021-01-13 16:52:45

toki1990
Member
Registered: 2019-11-03
Posts: 15

Re: Error message during boot: do_IRQ: 1.55 No irq handler for vector

i tried lastest agesa 1.2.0.0 included bios (v2801) for my motherboard. not solution. i sended message to asus support. (they are always not help). their support is crap

Offline

Board footer

Powered by FluxBB