You are not logged in.

#1 2021-01-10 16:06:30

4javier
Member
From: Italia
Registered: 2010-12-01
Posts: 102

Linux-5.10.x kills multitouch after suspend on ThinkPad T440P

Arch Linux with Gnome on Wayland
Since kernel 5.10.x landed on Arch, my touchpad two-fingers scroll stop working after resume from suspend. I tried to disable re-enable it from Preference menu, but didn't work. Edge scrolling working as alternative.

This is how it gets listed by libinput

Device:           SynPS/2 Synaptics TouchPad
Kernel:           /dev/input/event6
Group:            7
Seat:             seat0, default
Size:             100x76mm
Capabilities:     pointer gesture
Tap-to-click:     disabled
Tap-and-drag:     enabled
Tap drag lock:    disabled
Left-handed:      disabled
Nat.scrolling:    disabled
Middle emulation: disabled
Calibration:      n/a
Scroll methods:   *two-finger edge 
Click methods:    *button-areas clickfinger 
Disable-w-typing: enabled
Accel profiles:   flat *adaptive
Rotation:         n/a

When I launch libinput debug-gui, I can see second touch recognized always at the same position on top border of touch area, while third, fourth and fifth are totally ignored.

This is the journal for a suspend/resume cycle (rts5227 is a card reader module, not related to touch)

gen 10 16:21:06 ThinkArch systemd[1]: Reached target Sleep.
gen 10 16:21:06 ThinkArch systemd[1]: Starting Suspend...
gen 10 16:21:06 ThinkArch gsd-usb-protect[1430]: Error calling USBGuard DBus to change the protection after a screensaver event: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.usbguard1 was not provided by any .service files
gen 10 16:21:06 ThinkArch systemd-sleep[1737]: rmmod: ERROR: Module rts5227 is not currently loaded
gen 10 16:21:06 ThinkArch [1734]: /usr/lib/systemd/system-sleep/rts5227-dkms-suspend.sh failed with exit status 1.
gen 10 16:21:06 ThinkArch systemd-sleep[1730]: Suspending system...
gen 10 16:21:06 ThinkArch kernel: PM: suspend entry (deep)
gen 10 16:21:17 ThinkArch kernel: Filesystems sync: 0.022 seconds
gen 10 16:21:17 ThinkArch kernel: Freezing user space processes ... (elapsed 0.002 seconds) done.
gen 10 16:21:17 ThinkArch kernel: OOM killer disabled.
gen 10 16:21:17 ThinkArch kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
gen 10 16:21:17 ThinkArch kernel: printk: Suspending console(s) (use no_console_suspend to debug)
gen 10 16:21:17 ThinkArch kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
gen 10 16:21:17 ThinkArch kernel: sd 0:0:0:0: [sda] Stopping disk
gen 10 16:21:17 ThinkArch kernel: e1000e: EEE TX LPI TIMER: 00000011
gen 10 16:21:17 ThinkArch kernel: ACPI: EC: interrupt blocked
gen 10 16:21:17 ThinkArch kernel: ACPI: Preparing to enter system sleep state S3
gen 10 16:21:17 ThinkArch kernel: ACPI: EC: event blocked
gen 10 16:21:17 ThinkArch kernel: ACPI: EC: EC stopped
gen 10 16:21:17 ThinkArch kernel: PM: Saving platform NVS memory
gen 10 16:21:17 ThinkArch kernel: Disabling non-boot CPUs ...
gen 10 16:21:17 ThinkArch kernel: smpboot: CPU 1 is now offline
gen 10 16:21:17 ThinkArch kernel: smpboot: CPU 2 is now offline
gen 10 16:21:17 ThinkArch kernel: smpboot: CPU 3 is now offline
gen 10 16:21:17 ThinkArch kernel: ACPI: Low-level resume complete
gen 10 16:21:17 ThinkArch kernel: ACPI: EC: EC started
gen 10 16:21:17 ThinkArch kernel: PM: Restoring platform NVS memory
gen 10 16:21:17 ThinkArch kernel: smpboot: Scheduler frequency invariance went wobbly, disabling!
gen 10 16:21:17 ThinkArch kernel: Enabling non-boot CPUs ...
gen 10 16:21:17 ThinkArch kernel: x86: Booting SMP configuration:
gen 10 16:21:17 ThinkArch kernel: smpboot: Booting Node 0 Processor 1 APIC 0x1
gen 10 16:21:17 ThinkArch kernel: CPU1 is up
gen 10 16:21:17 ThinkArch kernel: smpboot: Booting Node 0 Processor 2 APIC 0x2
gen 10 16:21:17 ThinkArch kernel: CPU2 is up
gen 10 16:21:17 ThinkArch kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
gen 10 16:21:17 ThinkArch kernel: CPU3 is up
gen 10 16:21:17 ThinkArch kernel: ACPI: Waking up from system sleep state S3
gen 10 16:21:17 ThinkArch kernel: ACPI: EC: interrupt unblocked
gen 10 16:21:17 ThinkArch kernel: usb usb2: root hub lost power or was reset
gen 10 16:21:17 ThinkArch kernel: usb usb3: root hub lost power or was reset
gen 10 16:21:17 ThinkArch kernel: ACPI: EC: event unblocked
gen 10 16:21:17 ThinkArch kernel: sd 0:0:0:0: [sda] Starting disk
gen 10 16:21:17 ThinkArch kernel: usb 1-1: reset high-speed USB device number 2 using ehci-pci
gen 10 16:21:17 ThinkArch kernel: ACPI: \: failed to evaluate _DSM (0x1001)
gen 10 16:21:17 ThinkArch kernel: ACPI: \: failed to evaluate _DSM (0x1001)
gen 10 16:21:17 ThinkArch kernel: ata6: SATA link down (SStatus 0 SControl 300)
gen 10 16:21:17 ThinkArch kernel: usb 2-7: reset full-speed USB device number 2 using xhci_hcd
gen 10 16:21:17 ThinkArch kernel: usb 2-11: reset full-speed USB device number 3 using xhci_hcd
gen 10 16:21:17 ThinkArch kernel: usb 2-12: reset high-speed USB device number 4 using xhci_hcd
gen 10 16:21:17 ThinkArch kernel: acpi LNXPOWER:02: Turning OFF
gen 10 16:21:17 ThinkArch kernel: OOM killer enabled.
gen 10 16:21:17 ThinkArch kernel: Restarting tasks ... done.
gen 10 16:21:17 ThinkArch upowerd[924]: treating change event as add on /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1
gen 10 16:21:17 ThinkArch systemd-sleep[1730]: System resumed.
gen 10 16:21:17 ThinkArch upowerd[924]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb2/2-7
gen 10 16:21:17 ThinkArch kernel: PM: suspend exit
gen 10 16:21:17 ThinkArch systemd-sleep[1923]: modprobe: FATAL: Module rts5227 not found in directory /lib/modules/5.10.5-arch1-1
gen 10 16:21:17 ThinkArch upowerd[924]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb2/2-7
gen 10 16:21:17 ThinkArch systemd[1]: Stopped target Bluetooth.
gen 10 16:21:17 ThinkArch kernel: Bluetooth: hci0: read Intel version: 370710018002030d00
gen 10 16:21:17 ThinkArch systemd[1115]: Reached target Bluetooth.
gen 10 16:21:17 ThinkArch upowerd[924]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb2/2-11
gen 10 16:21:17 ThinkArch systemd[1]: Reached target Bluetooth.
gen 10 16:21:17 ThinkArch upowerd[924]: treating change event as add on /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1
gen 10 16:21:17 ThinkArch upowerd[924]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb2/2-11
gen 10 16:21:17 ThinkArch kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
gen 10 16:21:17 ThinkArch kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
gen 10 16:21:17 ThinkArch kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
gen 10 16:21:17 ThinkArch kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
gen 10 16:21:17 ThinkArch kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
gen 10 16:21:17 ThinkArch kernel: ata1.00: configured for UDMA/133
gen 10 16:21:17 ThinkArch kernel: Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
gen 10 16:21:17 ThinkArch [1918]: /usr/lib/systemd/system-sleep/rts5227-dkms-suspend.sh failed with exit status 1.
gen 10 16:21:17 ThinkArch systemd[1]: systemd-suspend.service: Succeeded.
gen 10 16:21:17 ThinkArch systemd[1]: Finished Suspend.
gen 10 16:21:17 ThinkArch audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:21:17 ThinkArch audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:21:17 ThinkArch systemd[1]: Stopped target Sleep.
gen 10 16:21:17 ThinkArch systemd[1]: Reached target Suspend.
gen 10 16:21:17 ThinkArch systemd[1]: Stopped target Suspend.
gen 10 16:21:17 ThinkArch systemd-logind[497]: Operation 'sleep' finished.
gen 10 16:21:17 ThinkArch kernel: audit: type=1130 audit(1610292077.843:138): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:21:17 ThinkArch kernel: audit: type=1131 audit(1610292077.843:139): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:21:17 ThinkArch NetworkManager[495]: <info>  [1610292077.8485] manager: sleep: wake requested (sleeping: yes  enabled: yes)
gen 10 16:21:17 ThinkArch NetworkManager[495]: <info>  [1610292077.8486] device (wlp3s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'managed')
gen 10 16:21:17 ThinkArch NetworkManager[495]: <info>  [1610292077.8502] device (p2p-dev-wlp3s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'managed')
gen 10 16:21:17 ThinkArch NetworkManager[495]: <info>  [1610292077.8510] manager: NetworkManager state is now CONNECTED_LOCAL
gen 10 16:21:17 ThinkArch kernel: Bluetooth: hci0: unexpected event for opcode 0xfc2f
gen 10 16:21:17 ThinkArch NetworkManager[495]: <info>  [1610292077.9108] device (wlp3s0): supplicant interface state: internal-starting -> disconnected
gen 10 16:21:17 ThinkArch NetworkManager[495]: <info>  [1610292077.9109] device (p2p-dev-wlp3s0): state change: unavailable -> unmanaged (reason 'removed', sys-iface-state: 'removed')
gen 10 16:21:17 ThinkArch NetworkManager[495]: <info>  [1610292077.9114] Wi-Fi P2P device controlled by interface wlp3s0 created
gen 10 16:21:17 ThinkArch NetworkManager[495]: <info>  [1610292077.9116] manager: (p2p-dev-wlp3s0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/6)
gen 10 16:21:17 ThinkArch NetworkManager[495]: <info>  [1610292077.9119] device (p2p-dev-wlp3s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
gen 10 16:21:17 ThinkArch NetworkManager[495]: <info>  [1610292077.9132] device (wlp3s0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
gen 10 16:21:17 ThinkArch NetworkManager[495]: <info>  [1610292077.9139] device (p2p-dev-wlp3s0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
gen 10 16:21:17 ThinkArch gnome-shell[1199]: Removing a network device that was not added
gen 10 16:21:17 ThinkArch kernel: Bluetooth: hci0: Intel BT fw patch 0x57 completed & activated
gen 10 16:21:17 ThinkArch NetworkManager[495]: <warn>  [1610292077.9246] sup-iface[8694f3c99e2ace40,1,wlp3s0]: call-p2p-cancel: failed with P2P cancel failed
gen 10 16:21:22 ThinkArch gdm-password][2056]: gkr-pam: unlocked login keyring
gen 10 16:21:22 ThinkArch audit[2056]: USER_AUTH pid=2056 uid=0 auid=1000 ses=3 msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="javier" exe="/usr/lib/gdm-session-worker" hostname=ThinkArch addr=? terminal=/dev/tty1 res=success'
gen 10 16:21:22 ThinkArch kernel: audit: type=1100 audit(1610292082.403:140): pid=2056 uid=0 auid=1000 ses=3 msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="javier" exe="/usr/lib/gdm-session-worker" hostname=ThinkArch addr=? terminal=/dev/tty1 res=success'
gen 10 16:21:22 ThinkArch dbus-daemon[494]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.75' (uid=0 pid=2056 comm="gdm-session-worker [pam/gdm-password] ")
gen 10 16:21:22 ThinkArch dbus-daemon[494]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
gen 10 16:21:22 ThinkArch gdm-password][2056]: pam_systemd_home(gdm-password:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
gen 10 16:21:22 ThinkArch audit[2056]: USER_ACCT pid=2056 uid=0 auid=1000 ses=3 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="javier" exe="/usr/lib/gdm-session-worker" hostname=ThinkArch addr=? terminal=/dev/tty1 res=success'
gen 10 16:21:22 ThinkArch audit[2056]: CRED_REFR pid=2056 uid=0 auid=1000 ses=3 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="javier" exe="/usr/lib/gdm-session-worker" hostname=ThinkArch addr=? terminal=/dev/tty1 res=success'
gen 10 16:21:22 ThinkArch kernel: audit: type=1101 audit(1610292082.410:141): pid=2056 uid=0 auid=1000 ses=3 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="javier" exe="/usr/lib/gdm-session-worker" hostname=ThinkArch addr=? terminal=/dev/tty1 res=success'
gen 10 16:21:22 ThinkArch kernel: audit: type=1110 audit(1610292082.410:142): pid=2056 uid=0 auid=1000 ses=3 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="javier" exe="/usr/lib/gdm-session-worker" hostname=ThinkArch addr=? terminal=/dev/tty1 res=success'
gen 10 16:21:22 ThinkArch gnome-shell[1199]: loading default theme (Adwaita)
gen 10 16:21:22 ThinkArch gnome-shell[1199]: clutter_actor_add_child: assertion 'child->priv->parent == NULL' failed
gen 10 16:21:22 ThinkArch gnome-shell[1199]: clutter_actor_add_child: assertion 'child->priv->parent == NULL' failed
gen 10 16:21:22 ThinkArch gnome-shell[1199]: [System monitor] applet enabling
gen 10 16:21:22 ThinkArch gnome-shell[1199]: error reading: /sys/class/hwmon/hwmon0/temp1_input
gen 10 16:21:22 ThinkArch gnome-shell[1199]: Attempting to remove actor of type 'StBin' from group of class 'StBoxLayout', but the container is not the actor's parent.
gen 10 16:21:22 ThinkArch gnome-shell[1199]: [System monitor] applet enabling done
gen 10 16:21:22 ThinkArch NetworkManager[495]: <info>  [1610292082.8571] agent-manager: agent[4c0186e2d1b5863b,:1.47/org.gnome.Shell.NetworkAgent/1000]: agent registered
gen 10 16:21:22 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:21:23 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:21:23 ThinkArch gsd-usb-protect[1430]: Error calling USBGuard DBus to change the protection after a screensaver event: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.usbguard1 was not provided by any .service files
gen 10 16:21:23 ThinkArch systemd[1]: NetworkManager-dispatcher.service: Succeeded.
gen 10 16:21:23 ThinkArch audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:21:23 ThinkArch kernel: audit: type=1131 audit(1610292083.490:143): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3000] policy: auto-activating connection 'S.L.E.' (8f34d9c5-5b27-495f-90a1-96925a94e9a1)
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3020] device (wlp3s0): Activation: starting connection 'S.L.E.' (8f34d9c5-5b27-495f-90a1-96925a94e9a1)
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3026] device (wlp3s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3038] manager: NetworkManager state is now CONNECTING
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3051] device (wlp3s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3068] device (wlp3s0): Activation: (wifi) access point 'S.L.E.' has security, but secrets are required.
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3072] device (wlp3s0): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3140] device (wlp3s0): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3156] device (wlp3s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3165] device (wlp3s0): Activation: (wifi) connection 'S.L.E.' has security, and secrets exist.  No new secrets needed.
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3171] Config: added 'ssid' value 'S.L.E.'
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3173] Config: added 'scan_ssid' value '1'
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3175] Config: added 'bgscan' value 'simple:30:-70:86400'
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3176] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3176] Config: added 'psk' value '<hidden>'
gen 10 16:21:24 ThinkArch wpa_supplicant[545]: wlp3s0: SME: Trying to authenticate with d4:60:e3:4b:63:75 (SSID='S.L.E.' freq=5260 MHz)
gen 10 16:21:24 ThinkArch kernel: wlp3s0: authenticate with d4:60:e3:4b:63:75
gen 10 16:21:24 ThinkArch kernel: wlp3s0: send auth to d4:60:e3:4b:63:75 (try 1/3)
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3499] device (wlp3s0): supplicant interface state: disconnected -> authenticating
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.3500] device (p2p-dev-wlp3s0): supplicant management interface state: disconnected -> authenticating
gen 10 16:21:24 ThinkArch kernel: wlp3s0: send auth to d4:60:e3:4b:63:75 (try 2/3)
gen 10 16:21:24 ThinkArch wpa_supplicant[545]: wlp3s0: Trying to associate with d4:60:e3:4b:63:75 (SSID='S.L.E.' freq=5260 MHz)
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.4735] device (wlp3s0): supplicant interface state: authenticating -> associating
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.4736] device (p2p-dev-wlp3s0): supplicant management interface state: authenticating -> associating
gen 10 16:21:24 ThinkArch kernel: wlp3s0: authenticated
gen 10 16:21:24 ThinkArch kernel: wlp3s0: associate with d4:60:e3:4b:63:75 (try 1/3)
gen 10 16:21:24 ThinkArch kernel: wlp3s0: RX AssocResp from d4:60:e3:4b:63:75 (capab=0x1011 status=0 aid=1)
gen 10 16:21:24 ThinkArch kernel: wlp3s0: associated
gen 10 16:21:24 ThinkArch wpa_supplicant[545]: wlp3s0: Associated with d4:60:e3:4b:63:75
gen 10 16:21:24 ThinkArch wpa_supplicant[545]: wlp3s0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.5044] device (wlp3s0): supplicant interface state: associating -> 4way_handshake
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.5044] device (p2p-dev-wlp3s0): supplicant management interface state: associating -> 4way_handshake
gen 10 16:21:24 ThinkArch wpa_supplicant[545]: wlp3s0: WPA: Key negotiation completed with d4:60:e3:4b:63:75 [PTK=CCMP GTK=CCMP]
gen 10 16:21:24 ThinkArch wpa_supplicant[545]: wlp3s0: CTRL-EVENT-CONNECTED - Connection to d4:60:e3:4b:63:75 completed [id=0 id_str=]
gen 10 16:21:24 ThinkArch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.5233] device (wlp3s0): supplicant interface state: 4way_handshake -> completed
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.5234] device (wlp3s0): Activation: (wifi) Stage 2 of 5 (Device Configure) successful. Connected to wireless network "S.L.E."
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.5234] device (p2p-dev-wlp3s0): supplicant management interface state: 4way_handshake -> completed
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.5235] device (wlp3s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
gen 10 16:21:24 ThinkArch NetworkManager[495]: <info>  [1610292084.5240] dhcp4 (wlp3s0): activation: beginning transaction (timeout in 45 seconds)
gen 10 16:21:24 ThinkArch wpa_supplicant[545]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=0 signal=-77 noise=9999 txrate=520000
gen 10 16:21:24 ThinkArch kernel: wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by d4:60:e3:4b:63:75
gen 10 16:21:26 ThinkArch NetworkManager[495]: <info>  [1610292086.4946] dhcp6 (wlp3s0): activation: beginning transaction (timeout in 45 seconds)
gen 10 16:21:26 ThinkArch NetworkManager[495]: <info>  [1610292086.5220] dhcp6 (wlp3s0): option dhcp6_name_servers   => 'fe80::1'
gen 10 16:21:26 ThinkArch NetworkManager[495]: <info>  [1610292086.5220] dhcp6 (wlp3s0): state changed unknown -> bound
gen 10 16:21:26 ThinkArch NetworkManager[495]: <info>  [1610292086.5230] device (wlp3s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
gen 10 16:21:26 ThinkArch dbus-daemon[494]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.3' (uid=0 pid=495 comm="/usr/bin/NetworkManager --no-daemon ")
gen 10 16:21:26 ThinkArch systemd[1]: Starting Network Manager Script Dispatcher Service...
gen 10 16:21:26 ThinkArch dbus-daemon[494]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
gen 10 16:21:26 ThinkArch systemd[1]: Started Network Manager Script Dispatcher Service.
gen 10 16:21:26 ThinkArch audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:21:26 ThinkArch kernel: audit: type=1130 audit(1610292086.527:144): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:21:26 ThinkArch NetworkManager[495]: <info>  [1610292086.5336] device (wlp3s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
gen 10 16:21:26 ThinkArch NetworkManager[495]: <info>  [1610292086.5338] device (wlp3s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
gen 10 16:21:26 ThinkArch NetworkManager[495]: <info>  [1610292086.5341] manager: NetworkManager state is now CONNECTED_LOCAL
gen 10 16:21:26 ThinkArch NetworkManager[495]: <info>  [1610292086.5391] dns-mgr: Writing DNS information to /usr/bin/resolvconf
gen 10 16:21:26 ThinkArch NetworkManager[495]: <info>  [1610292086.5797] device (wlp3s0): Activation: successful, device activated.
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6272] dhcp4 (wlp3s0): option dhcp_lease_time      => '21600'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6273] dhcp4 (wlp3s0): option domain_name          => 'homenet.telecomitalia.it'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6274] dhcp4 (wlp3s0): option domain_name_servers  => '192.168.1.1 192.168.1.1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6274] dhcp4 (wlp3s0): option expiry               => '1610313686'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6275] dhcp4 (wlp3s0): option ip_address           => '192.168.1.10'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6275] dhcp4 (wlp3s0): option requested_broadcast_address => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6276] dhcp4 (wlp3s0): option requested_domain_name => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6276] dhcp4 (wlp3s0): option requested_domain_name_servers => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6276] dhcp4 (wlp3s0): option requested_domain_search => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6277] dhcp4 (wlp3s0): option requested_host_name  => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6277] dhcp4 (wlp3s0): option requested_interface_mtu => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6277] dhcp4 (wlp3s0): option requested_ms_classless_static_routes => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6278] dhcp4 (wlp3s0): option requested_nis_domain => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6278] dhcp4 (wlp3s0): option requested_nis_servers => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6278] dhcp4 (wlp3s0): option requested_ntp_servers => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6279] dhcp4 (wlp3s0): option requested_rfc3442_classless_static_routes => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6279] dhcp4 (wlp3s0): option requested_root_path  => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6279] dhcp4 (wlp3s0): option requested_routers    => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6280] dhcp4 (wlp3s0): option requested_static_routes => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6280] dhcp4 (wlp3s0): option requested_subnet_mask => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6281] dhcp4 (wlp3s0): option requested_time_offset => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6281] dhcp4 (wlp3s0): option requested_wpad       => '1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6282] dhcp4 (wlp3s0): option routers              => '192.168.1.1'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6282] dhcp4 (wlp3s0): option subnet_mask          => '255.255.255.0'
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6282] dhcp4 (wlp3s0): state changed unknown -> bound
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6333] manager: NetworkManager state is now CONNECTED_SITE
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6337] policy: set 'S.L.E.' (wlp3s0) as default for IPv4 routing and DNS
gen 10 16:21:28 ThinkArch NetworkManager[495]: <info>  [1610292088.6356] dns-mgr: Writing DNS information to /usr/bin/resolvconf
gen 10 16:21:32 ThinkArch NetworkManager[495]: <info>  [1610292092.7614] manager: NetworkManager state is now CONNECTED_GLOBAL
gen 10 16:21:36 ThinkArch systemd[1]: NetworkManager-dispatcher.service: Succeeded.
gen 10 16:21:36 ThinkArch audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:21:36 ThinkArch kernel: audit: type=1131 audit(1610292096.490:145): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:21:48 ThinkArch audit[2194]: USER_AUTH pid=2194 uid=1000 auid=1000 ses=4 msg='op=PAM:authentication grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=ThinkArch addr=? terminal=pts/0 res=success'
gen 10 16:21:48 ThinkArch audit[2194]: USER_ACCT pid=2194 uid=1000 auid=1000 ses=4 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=ThinkArch addr=? terminal=pts/0 res=success'
gen 10 16:21:48 ThinkArch su[2194]: (to root) javier on pts/0
gen 10 16:21:48 ThinkArch kernel: audit: type=1100 audit(1610292108.871:146): pid=2194 uid=1000 auid=1000 ses=4 msg='op=PAM:authentication grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=ThinkArch addr=? terminal=pts/0 res=success'
gen 10 16:21:48 ThinkArch kernel: audit: type=1101 audit(1610292108.871:147): pid=2194 uid=1000 auid=1000 ses=4 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=ThinkArch addr=? terminal=pts/0 res=success'
gen 10 16:21:48 ThinkArch kernel: audit: type=1103 audit(1610292108.874:148): pid=2194 uid=1000 auid=1000 ses=4 msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=ThinkArch addr=? terminal=pts/0 res=success'
gen 10 16:21:48 ThinkArch kernel: audit: type=1105 audit(1610292108.874:149): pid=2194 uid=1000 auid=1000 ses=4 msg='op=PAM:session_open grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=ThinkArch addr=? terminal=pts/0 res=success'
gen 10 16:21:48 ThinkArch audit[2194]: CRED_ACQ pid=2194 uid=1000 auid=1000 ses=4 msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=ThinkArch addr=? terminal=pts/0 res=success'
gen 10 16:21:48 ThinkArch audit[2194]: USER_START pid=2194 uid=1000 auid=1000 ses=4 msg='op=PAM:session_open grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=ThinkArch addr=? terminal=pts/0 res=success'
gen 10 16:21:48 ThinkArch su[2194]: pam_unix(su:session): session opened for user root(uid=0) by (uid=1000)
gen 10 16:22:22 ThinkArch systemd-timesyncd[484]: Initial synchronization to time server 93.41.196.243:123 (0.arch.pool.ntp.org).
gen 10 16:23:34 ThinkArch gnome-shell[1199]: libinput error: event6  - SynPS/2 Synaptics TouchPad: client bug: event processing lagging behind by 11ms, your system is too slow
gen 10 16:24:23 ThinkArch gnome-shell[1199]: libinput error: event6  - SynPS/2 Synaptics TouchPad: client bug: event processing lagging behind by 12ms, your system is too slow
gen 10 16:24:28 ThinkArch systemd[1115]: Started Application launched by gnome-shell.
gen 10 16:24:28 ThinkArch gnome-shell[1199]: libinput error: event6  - SynPS/2 Synaptics TouchPad: client bug: event processing lagging behind by 24ms, your system is too slow
gen 10 16:24:28 ThinkArch gnome-shell[1199]: libinput error: event6  - SynPS/2 Synaptics TouchPad: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
gen 10 16:24:40 ThinkArch rtkit-daemon[934]: Supervising 3 threads of 1 processes of 1 users.
gen 10 16:24:40 ThinkArch rtkit-daemon[934]: Supervising 3 threads of 1 processes of 1 users.
gen 10 16:24:41 ThinkArch rtkit-daemon[934]: Supervising 3 threads of 1 processes of 1 users.
gen 10 16:24:41 ThinkArch rtkit-daemon[934]: Supervising 3 threads of 1 processes of 1 users.
gen 10 16:24:41 ThinkArch rtkit-daemon[934]: Supervising 3 threads of 1 processes of 1 users.
gen 10 16:24:41 ThinkArch rtkit-daemon[934]: Supervising 3 threads of 1 processes of 1 users.
gen 10 16:24:41 ThinkArch rtkit-daemon[934]: Successfully made thread 2498 of process 2256 owned by '1000' RT at priority 10.
gen 10 16:24:41 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:42 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:42 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:43 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:43 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:43 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:43 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:43 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:43 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:43 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:43 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:43 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:43 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:43 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:43 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:44 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:44 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:45 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:24:45 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:25:07 ThinkArch dbus-daemon[1138]: [session uid=1000 pid=1138] Activating service name='org.gnome.ChromeGnomeShell' requested by ':1.104' (uid=1000 pid=2799 comm="/usr/bin/python /usr/bin/chrome-gnome-shell /usr/l")
gen 10 16:25:07 ThinkArch dbus-daemon[1138]: [session uid=1000 pid=1138] Successfully activated service 'org.gnome.ChromeGnomeShell'
gen 10 16:25:17 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:25:17 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:25:21 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:25:21 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:25:21 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:25:21 ThinkArch rtkit-daemon[934]: Supervising 4 threads of 2 processes of 1 users.
gen 10 16:25:21 ThinkArch rtkit-daemon[934]: Successfully made thread 2978 of process 2550 owned by '1000' RT at priority 10.
gen 10 16:25:21 ThinkArch rtkit-daemon[934]: Supervising 5 threads of 3 processes of 1 users.
gen 10 16:27:14 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:29:00 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:30:16 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:30:46 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:32:19 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:33:30 ThinkArch gnome-shell[1199]: Can't update stage views actor Gjs_ui_boxpointer_BoxPointer is on because it needs an allocation.
gen 10 16:33:30 ThinkArch gnome-shell[1199]: Can't update stage views actor StBin is on because it needs an allocation.
gen 10 16:33:30 ThinkArch gnome-shell[1199]: Can't update stage views actor StBoxLayout is on because it needs an allocation.
gen 10 16:33:30 ThinkArch gnome-shell[1199]: Can't update stage views actor StBoxLayout is on because it needs an allocation.
gen 10 16:33:30 ThinkArch gnome-shell[1199]: Can't update stage views actor StBoxLayout is on because it needs an allocation.
gen 10 16:33:30 ThinkArch gnome-shell[1199]: Can't update stage views actor StScrollView is on because it needs an allocation.
gen 10 16:33:30 ThinkArch gnome-shell[1199]: Can't update stage views actor StBoxLayout is on because it needs an allocation.
gen 10 16:33:42 ThinkArch systemd[1115]: Started Application launched by gnome-shell.
gen 10 16:33:42 ThinkArch gnome-shell[1199]: Can't update stage views actor Gjs_ui_boxpointer_BoxPointer is on because it needs an allocation.
gen 10 16:33:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StBin is on because it needs an allocation.
gen 10 16:33:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StBoxLayout is on because it needs an allocation.
gen 10 16:33:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StBoxLayout is on because it needs an allocation.
gen 10 16:33:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StBoxLayout is on because it needs an allocation.
gen 10 16:33:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StScrollView is on because it needs an allocation.
gen 10 16:33:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StBoxLayout is on because it needs an allocation.
gen 10 16:33:44 ThinkArch dbus-daemon[494]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.94' (uid=1000 pid=3445 comm="python3 /usr/bin/gnome-tweaks ")
gen 10 16:33:44 ThinkArch audit: BPF prog-id=27 op=LOAD
gen 10 16:33:44 ThinkArch audit: BPF prog-id=28 op=LOAD
gen 10 16:33:44 ThinkArch systemd[1]: Starting Hostname Service...
gen 10 16:33:44 ThinkArch kernel: audit: type=1334 audit(1610292824.211:150): prog-id=27 op=LOAD
gen 10 16:33:44 ThinkArch kernel: audit: type=1334 audit(1610292824.211:151): prog-id=28 op=LOAD
gen 10 16:33:44 ThinkArch dbus-daemon[494]: [system] Successfully activated service 'org.freedesktop.hostname1'
gen 10 16:33:44 ThinkArch audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:33:44 ThinkArch systemd[1]: Started Hostname Service.
gen 10 16:33:44 ThinkArch kernel: audit: type=1130 audit(1610292824.277:152): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:33:44 ThinkArch gnome-shell[1199]: meta_window_set_stack_position_no_sync: assertion 'window->stack_position >= 0' failed
gen 10 16:33:44 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:44 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:44 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:44 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:44 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:44 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:44 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:44 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:44 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:44 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:46 ThinkArch dbus-daemon[494]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service' requested by ':1.96' (uid=1000 pid=3472 comm="/usr/lib/gvfsd-dnssd --spawner :1.3 /org/gtk/gvfs/")
gen 10 16:33:46 ThinkArch dbus-daemon[494]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service not found.
gen 10 16:33:47 ThinkArch systemd[1115]: app-gnome-org.gnome.tweaks-3445.scope: Succeeded.
gen 10 16:33:47 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:47 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:47 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:47 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:47 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:47 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:47 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:47 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:47 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:47 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:47 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:53 ThinkArch systemd[1115]: Started Application launched by gnome-shell.
gen 10 16:33:55 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:55 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:55 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:55 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:55 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:55 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:55 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:55 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:55 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:33:55 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:34:06 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:34:14 ThinkArch systemd[1]: systemd-hostnamed.service: Succeeded.
gen 10 16:34:14 ThinkArch audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:34:14 ThinkArch kernel: audit: type=1131 audit(1610292854.322:153): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:34:14 ThinkArch audit: BPF prog-id=28 op=UNLOAD
gen 10 16:34:14 ThinkArch audit: BPF prog-id=27 op=UNLOAD
gen 10 16:34:14 ThinkArch kernel: audit: type=1334 audit(1610292854.549:154): prog-id=28 op=UNLOAD
gen 10 16:34:14 ThinkArch kernel: audit: type=1334 audit(1610292854.549:155): prog-id=27 op=UNLOAD
gen 10 16:34:37 ThinkArch systemd[1]: Starting Cleanup of Temporary Directories...
gen 10 16:34:37 ThinkArch systemd[1]: systemd-tmpfiles-clean.service: Succeeded.
gen 10 16:34:37 ThinkArch systemd[1]: Finished Cleanup of Temporary Directories.
gen 10 16:34:37 ThinkArch audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:34:37 ThinkArch audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:34:37 ThinkArch kernel: audit: type=1130 audit(1610292877.643:156): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:34:37 ThinkArch kernel: audit: type=1131 audit(1610292877.643:157): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:34:41 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:35:22 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:35:29 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:35:29 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:35:29 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:35:29 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:35:29 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:35:29 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:35:29 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:35:29 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:35:29 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:35:29 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:35:52 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:36:27 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:37:12 ThinkArch rtkit-daemon[934]: Supervising 5 threads of 3 processes of 1 users.
gen 10 16:37:12 ThinkArch rtkit-daemon[934]: Supervising 5 threads of 3 processes of 1 users.
gen 10 16:37:25 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:38:00 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:38:42 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:39:12 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:39:47 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:40:28 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:40:58 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:41:33 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:42:28 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:28 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:28 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:28 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:28 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:28 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:28 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:28 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:28 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:28 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:31 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:42:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:42:42 ThinkArch gnome-shell[1199]: Can't update stage views actor StWidget is on because it needs an allocation.
gen 10 16:43:06 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:43:47 ThinkArch wpa_supplicant[545]: wlp3s0: Reject scan trigger since one is already pending
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.0103] manager: sleep: sleep requested (sleeping: no  enabled: yes)
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.0109] device (enp0s25): state change: unavailable -> unmanaged (reason 'sleeping', sys-iface-state: 'managed')
gen 10 16:44:08 ThinkArch gnome-shell[1199]: Source ID 6420 was not found when attempting to remove it
gen 10 16:44:08 ThinkArch gnome-shell[1199]: Source ID 6547 was not found when attempting to remove it
gen 10 16:44:08 ThinkArch gnome-shell[1199]: Source ID 6593 was not found when attempting to remove it
gen 10 16:44:08 ThinkArch gnome-shell[1199]: [System monitor] applet disable
gen 10 16:44:08 ThinkArch kernel: e1000e 0000:00:19.0 enp0s25: NIC Link is Down
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.1070] device (p2p-dev-wlp3s0): state change: disconnected -> unmanaged (reason 'sleeping', sys-iface-state: 'managed')
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.1073] manager: NetworkManager state is now ASLEEP
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.1076] device (wlp3s0): state change: activated -> deactivating (reason 'sleeping', sys-iface-state: 'managed')
gen 10 16:44:08 ThinkArch dbus-daemon[494]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.3' (uid=0 pid=495 comm="/usr/bin/NetworkManager --no-daemon ")
gen 10 16:44:08 ThinkArch systemd[1]: Starting Network Manager Script Dispatcher Service...
gen 10 16:44:08 ThinkArch dbus-daemon[494]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
gen 10 16:44:08 ThinkArch audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:44:08 ThinkArch systemd[1]: Started Network Manager Script Dispatcher Service.
gen 10 16:44:08 ThinkArch kernel: audit: type=1130 audit(1610293448.124:158): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
gen 10 16:44:08 ThinkArch gnome-shell[1199]: clutter_actor_add_child: assertion 'child->priv->parent == NULL' failed
gen 10 16:44:08 ThinkArch gnome-shell[1199]: clutter_actor_add_child: assertion 'child->priv->parent == NULL' failed
gen 10 16:44:08 ThinkArch kernel: wlp3s0: deauthenticating from d4:60:e3:4b:63:75 by local choice (Reason: 3=DEAUTH_LEAVING)
gen 10 16:44:08 ThinkArch wpa_supplicant[545]: wlp3s0: CTRL-EVENT-DISCONNECTED bssid=d4:60:e3:4b:63:75 reason=3 locally_generated=1
gen 10 16:44:08 ThinkArch wpa_supplicant[545]: wlp3s0: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.1637] dns-mgr: Writing DNS information to /usr/bin/resolvconf
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.2086] dns-mgr: Removing DNS information from /usr/bin/resolvconf
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.2471] device (wlp3s0): supplicant interface state: completed -> disconnected
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.2473] device (wlp3s0): state change: deactivating -> disconnected (reason 'sleeping', sys-iface-state: 'managed')
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.2760] dhcp4 (wlp3s0): canceled DHCP transaction
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.2760] dhcp4 (wlp3s0): state changed bound -> done
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.2764] dhcp6 (wlp3s0): canceled DHCP transaction
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.2764] dhcp6 (wlp3s0): state changed bound -> done
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.2791] device (wlp3s0): set-hw-addr: set MAC address to 2E:1E:63:50:C2:06 (scanning)
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.2861] device (wlp3s0): supplicant interface state: disconnected -> interface_disabled
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.2862] device (wlp3s0): supplicant interface state: interface_disabled -> disconnected
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.2862] device (wlp3s0): state change: disconnected -> unmanaged (reason 'sleeping', sys-iface-state: 'managed')
gen 10 16:44:08 ThinkArch NetworkManager[495]: <info>  [1610293448.2916] device (wlp3s0): set-hw-addr: reset MAC address to 7C:7A:91:CA:88:98 (unmanage)
gen 10 16:44:08 ThinkArch wpa_supplicant[545]: nl80211: deinit ifname=p2p-dev-wlp3s0 disabled_11b_rates=0
gen 10 16:44:08 ThinkArch wpa_supplicant[545]: nl80211: deinit ifname=wlp3s0 disabled_11b_rates=0
gen 10 16:44:08 ThinkArch gnome-shell[1199]: An active wireless connection, in infrastructure mode, involves no access point?
gen 10 16:44:09 ThinkArch gsd-usb-protect[1430]: Error calling USBGuard DBus to change the protection after a screensaver event: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.usbguard1 was not provided by any .service files

EDIT
Removing and modprobbing again i2c_i801 just one time seems to fix the issue even for following suspend/resume cycles until reboot

Last edited by 4javier (2021-01-10 17:36:38)

Offline

#2 2021-01-15 09:58:30

4javier
Member
From: Italia
Registered: 2010-12-01
Posts: 102

Re: Linux-5.10.x kills multitouch after suspend on ThinkPad T440P

Update:
With kernel 5.10.6 rmmod→modprobe has to be re-issued after every wakeup from suspend.

Offline

#3 2021-01-15 16:27:41

loqs
Member
Registered: 2014-03-06
Posts: 17,196

Re: Linux-5.10.x kills multitouch after suspend on ThinkPad T440P

You could first try linux-mainline 5.11-rc3 available built from Unofficial_user_repositories#miffe to see if the issue has been fixed upstream.
If it is not fixed upstream,  you could also consider bisecting between 5.9 and 5.10 to find the causal commit and then reporting it upstream.

Offline

#4 2021-01-16 17:32:06

4javier
Member
From: Italia
Registered: 2010-12-01
Posts: 102

Re: Linux-5.10.x kills multitouch after suspend on ThinkPad T440P

Thanks.
Unfortunately at the moment mainline kernel fails to mount /boot

gen 16 18:19:04 ThinkArch mount[468]: mount: /boot: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error.
gen 16 18:19:04 ThinkArch systemd[1]: boot.mount: Mount process exited, code=exited, status=32/n/a
gen 16 18:19:04 ThinkArch systemd[1]: boot.mount: Failed with result 'exit-code'.
gen 16 18:19:04 ThinkArch systemd[1]: Failed to mount /boot.

I'll wait for an update.

Offline

#5 2021-01-16 17:38:54

loqs
Member
Registered: 2014-03-06
Posts: 17,196

Re: Linux-5.10.x kills multitouch after suspend on ThinkPad T440P

The cause is likely missing modules in the initrd,  does the fallback initrd also produce the issue?

Offline

#6 2021-01-16 18:06:16

4javier
Member
From: Italia
Registered: 2010-12-01
Posts: 102

Re: Linux-5.10.x kills multitouch after suspend on ThinkPad T440P

Yes, it does.
Even if [filesystem] hook seems to be correctly executed on install

[2021-01-16T18:17:39+0100] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-mainline.preset: 'default'
[2021-01-16T18:17:39+0100] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-mainline -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-mainline.img
[2021-01-16T18:17:41+0100] [ALPM-SCRIPTLET] ==> Starting build: 5.11.0-rc3-1-mainline
[2021-01-16T18:17:41+0100] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2021-01-16T18:17:41+0100] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2021-01-16T18:17:41+0100] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2021-01-16T18:17:41+0100] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2021-01-16T18:17:41+0100] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2021-01-16T18:17:42+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2021-01-16T18:17:43+0100] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2021-01-16T18:17:43+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2021-01-16T18:17:43+0100] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2021-01-16T18:17:43+0100] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2021-01-16T18:17:43+0100] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-mainline.img
[2021-01-16T18:17:44+0100] [ALPM-SCRIPTLET] ==> Image generation successful
[2021-01-16T18:17:44+0100] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-mainline.preset: 'fallback'
[2021-01-16T18:17:44+0100] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-mainline -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-mainline-fallback.img -S autodetect
[2021-01-16T18:17:44+0100] [ALPM-SCRIPTLET] ==> Starting build: 5.11.0-rc3-1-mainline
[2021-01-16T18:17:44+0100] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2021-01-16T18:17:45+0100] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2021-01-16T18:17:45+0100] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2021-01-16T18:17:45+0100] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2021-01-16T18:17:46+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: wd719x
[2021-01-16T18:17:46+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2021-01-16T18:17:47+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2021-01-16T18:17:48+0100] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2021-01-16T18:17:50+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2021-01-16T18:17:51+0100] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2021-01-16T18:17:52+0100] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2021-01-16T18:17:53+0100] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-mainline-fallback.img
[2021-01-16T18:17:57+0100] [ALPM-SCRIPTLET] ==> Image generation successful

Offline

#7 2021-01-16 18:23:31

loqs
Member
Registered: 2014-03-06
Posts: 17,196

Re: Linux-5.10.x kills multitouch after suspend on ThinkPad T440P

Offline

#8 2021-01-16 18:33:39

4javier
Member
From: Italia
Registered: 2010-12-01
Posts: 102

Re: Linux-5.10.x kills multitouch after suspend on ThinkPad T440P

Well, kinda expected issue with unstable release.
I'll wait for rc4 to check for my real problem.

Offline

#9 2021-01-27 10:06:32

4javier
Member
From: Italia
Registered: 2010-12-01
Posts: 102

Re: Linux-5.10.x kills multitouch after suspend on ThinkPad T440P

Kernel 5.11.0-rc5-1-mainline finally boots on my system, but after the first suspend cycle touchpad doesn't work at all.
This is dmesg interesting snippet

[ 1709.786167] rmi4_smbus 0-002c: failed to get SMBus version number!
[ 1709.786430] rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask.
[ 1709.786694] rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -6.
[ 1709.786696] rmi4_f01 rmi4-00.fn01: Resume failed with code -6.
[ 1709.786698] rmi4_physical rmi4-00: Failed to suspend functions: -6
[ 1709.786699] rmi4_smbus 0-002c: Failed to resume device: -6
[ 1709.787271] rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-6).
[ 1709.787528] rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts!
[ 1710.001328] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1710.020501] ACPI: \: failed to evaluate _DSM (0x1001)
[ 1710.020506] ACPI: \: failed to evaluate _DSM (0x1001)
[ 1710.084555] ata6: SATA link down (SStatus 0 SControl 300)
[ 1710.098015] usb 2-7: reset full-speed USB device number 2 using xhci_hcd
[ 1710.361365] usb 2-12: reset high-speed USB device number 4 using xhci_hcd
[ 1710.624763] usb 2-11: reset full-speed USB device number 3 using xhci_hcd
[ 1710.766619] acpi LNXPOWER:02: Turning OFF
[ 1710.766877] OOM killer enabled.
[ 1710.766878] Restarting tasks ... 
[ 1710.792189] rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts!
[ 1710.792203] psmouse: probe of serio3 failed with error -1
[ 1710.796052] done.

After rmmod/modprobe i2c_i801 everything is restored

[ 1776.816853] psmouse serio1: synaptics: queried max coordinates: x [..5112], y [..3834]
[ 1776.846948] psmouse serio1: synaptics: queried min coordinates: x [1024..], y [1024..]
[ 1776.846956] psmouse serio1: synaptics: Trying to set up SMBus access
[ 1776.849722] psmouse serio1: synaptics: SMbus companion is not ready yet
[ 1776.849729] psmouse serio1: synaptics: quirked min/max coordinates: x [1024..5112], y [2024..4832]
[ 1776.909428] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00/0x0, board id: 2722, fw id: 1484859
[ 1776.909441] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1776.947394] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input26
[ 1777.575136] psmouse serio4: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 1777.770985] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio4/input/input27
[ 1784.120454] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 1784.120479] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1784.120768] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 1784.121122] at24 0-0050: supply vcc not found, using dummy regulator
[ 1784.121709] at24 0-0050: 256 byte spd EEPROM, read-only
[ 1784.121738] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1784.122068] at24 0-0051: supply vcc not found, using dummy regulator
[ 1784.122628] at24 0-0051: 256 byte spd EEPROM, read-only
[ 1784.122646] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 1784.729700] psmouse serio1: synaptics: queried max coordinates: x [..5112], y [..3834]
[ 1784.760836] psmouse serio1: synaptics: queried min coordinates: x [1024..], y [1024..]
[ 1784.760844] psmouse serio1: synaptics: Trying to set up SMBus access
[ 1784.763784] psmouse serio1: synaptics: SMbus companion is not ready yet
[ 1784.763791] psmouse serio1: synaptics: quirked min/max coordinates: x [1024..5112], y [2024..4832]
[ 1784.824348] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00/0x0, board id: 2722, fw id: 1484859
[ 1784.824358] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1784.862299] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input29
[ 1785.496238] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 1785.693993] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio5/input/input30

Offline

#10 2021-04-28 04:53:27

amjerm
Member
Registered: 2020-12-29
Posts: 1

Re: Linux-5.10.x kills multitouch after suspend on ThinkPad T440P

I am running into this as well. I ran lsmod and saved the output when it was not working, then rebooted confirmed it was working, ran lsmod again and compared the output. The difference is the rmi_core and rmi_smbus modules. rmi_core is used by rmi_smbus.

Offline

Board footer

Powered by FluxBB