You are not logged in.
Hello,
i try to use my usb webcam (picture and micro) --> (https://www.aliexpress.com/item/1005001 … 4c4dTXN4MJ)
My system freezes sometimes as soon as i plug-in the cam. Sometimes i can use the micro. Sometimes picture. And with luck, i can use picture and micro at the same time.
I googled... someone suggested to use linux-lts... so i changed from linux kernel to lts without success.
uname -r
5.4.98-1-ltsdmesg
[ 184.506708] usb 1-11.2: new high-speed USB device number 13 using xhci_hcd
[ 184.738393] usb 1-11.2: New USB device found, idVendor=1d6d, idProduct=0105, bcdDevice= 0.10
[ 184.738398] usb 1-11.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 184.738401] usb 1-11.2: Product: webcam
[ 184.738404] usb 1-11.2: Manufacturer: YGTek
[ 184.738407] usb 1-11.2: SerialNumber: YG_U700.2020.0904.1200
[ 184.739810] uvcvideo: Unknown video format 35363248-0000-0010-8000-00aa00389b71
[ 184.739822] uvcvideo: Found UVC 1.00 device webcam (1d6d:0105)
[ 189.816660] uvcvideo: Failed to set UVC probe control : -110 (exp. 26).
[ 194.856500] uvcvideo: Failed to query (129) UVC probe control : -110 (exp. 26).
[ 194.856503] uvcvideo: Failed to initialize the device (-5).
[ 225.096073] usb 1-11.2: 3:1: cannot set freq 16000 to ep 0x89
[ 225.547757] usb 1-11.2: 5:2: cannot get min/max values for control 2 (id 5)
[ 225.575687] usb 1-11.2: USB disconnect, device number 13lsusb
....
Bus 001 Device 014: ID 1d6d:0105 YGTek webcam
....Any idea?
Last edited by Vivus (2021-02-15 15:19:27)
Offline
@vivus,
are you still having this issue? I am experiencing a very similar issue with my razer kiyo, though my is a -32, instead of -110 for you.
ASRock X570 PG VELOCITA AM4 AMD X570 | AMD Ryzen 5900x | 128GB G.SKILL RipjawsV | ASRock Radeon RX 6700 XT Challenger D
Offline
Same Problem for me with a Logitech webcam.
[ 197.266049] uvcvideo: Failed to set UVC probe control : -110 (exp. 26).
[ 202.388096] usb 3-1: 3:1: cannot set freq 16000 to ep 0x86
[ 207.508096] usb 3-1: 3:1: cannot set freq 16000 to ep 0x86
...
[ 227.988058] usb 3-1: 3:1: cannot set freq 16000 to ep 0x86
[ 233.108154] usb 3-1: 3:1: cannot set freq 16000 to ep 0x86
[ 238.228123] usb 3-1: 3:1: cannot set freq 16000 to ep 0x86
[ 243.348157] usb 3-1: 3:1: cannot set freq 16000 to ep 0x86
[ 248.468071] usb 3-1: 3:1: cannot set freq 16000 to ep 0x86
[ 253.588148] usb 3-1: 3:1: cannot set freq 16000 to ep 0x86
[ 258.708087] usb 3-1: 3:1: cannot set freq 16000 to ep 0x86
[ 263.828111] usb 3-1: 3:1: cannot set freq 16000 to ep 0x86
Offline
I put my user into audio group which changed situation but did not solve it. Firefox stalled every time it wants to access webcam then. Before it just didn`t work. Unplugging the webcam made firefox alive again.
The I have solved the issue for me by installing the nouveau display driver. Before I was using vesa driver. Now everything works as expected.
Offline
Same problem with a logitech streamcam that works fine on my Ubuntu 20 machine. Sometimes it works for a few minutes. Then it crashes and does not work until reboot.
[ 226.898128] usb 2-2: current rate 16000 is different from the runtime rate 48000
[ 391.923563] uvcvideo 2-2:1.1: Failed to set UVC probe control : -110 (exp. 26).
Last edited by tmnvanderberg (2021-10-28 11:07:16)
Offline
Hello, I have the same problem here, using a Logitch StreamCam (2021 edition), plugged directly into an USB-C connector. I also get the same symptoms when plugging it into an USB-A 3.0 port using an adapter.
uname -r
5.17.6-arch1-1In dmesg (I got hundreds of those):
[ 356.009179] input: Logitech StreamCam as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb4/4-4/4-4:1.0/input/input26
[ 356.043241] usb 4-4: current rate 16000 is different from the runtime rate 24000
[ 356.074900] usb 4-4: current rate 16000 is different from the runtime rate 32000
[ 356.106978] usb 4-4: current rate 16000 is different from the runtime rate 48000
[ 356.164143] hid-generic 0003:046D:0893.0008: hiddev97,hidraw4: USB HID v1.11 Device [Logitech StreamCam] on usb-0000:0a:00.3-4/input5
[ 356.782171] usb 1-1: 1:0: usb_set_interface failed (-110)
[ 361.902508] usb 1-1: 1:0: usb_set_interface failed (-110)
[ 367.021820] usb 1-1: uac_clock_source_is_valid(): cannot get clock validity for id 41
[ 367.021824] usb 1-1: clock source 41 is not valid, cannot use
[ 370.103335] usb 4-4: reset SuperSpeed USB device number 3 using xhci_hcd
[ 377.262385] usb 1-1: 1:0: usb_set_interface failed (-110)
[ 382.381679] usb 1-1: 1:0: usb_set_interface failed (-110)
[ 387.502425] usb 1-1: uac_clock_source_is_valid(): cannot get clock validity for id 41
[ 387.502430] usb 1-1: clock source 41 is not valid, cannot use
[ 397.742305] usb 1-1: 1:0: usb_set_interface failed (-110)
[ 402.862151] usb 1-1: 1:0: usb_set_interface failed (-110)
[ 407.982082] usb 1-1: uac_clock_source_is_valid(): cannot get clock validity for id 41
[ 407.982087] usb 1-1: clock source 41 is not valid, cannot use
[ 418.222340] usb 1-1: 1:0: usb_set_interface failed (-110)
[ 423.341829] usb 1-1: 1:0: usb_set_interface failed (-110)
[ 428.461911] usb 1-1: uac_clock_source_is_valid(): cannot get clock validity for id 41
[ 428.461914] usb 1-1: clock source 41 is not valid, cannot use
[ 438.705621] usb 1-1: 1:0: usb_set_interface failed (-110)
[ 443.825434] usb 1-1: 1:0: usb_set_interface failed (-110)
[ 448.942139] usb 1-1: uac_clock_source_is_valid(): cannot get clock validity for id 41
[ 448.942144] usb 1-1: clock source 41 is not valid, cannot use
[ 455.249116] usb 4-4: USB disconnect, device number 3
[ 455.253673] xhci_hcd 0000:0a:00.3: WARN Event TRB for slot 5 ep 2 with no TDs queued?
[ 455.253679] uvcvideo 4-4:1.1: Failed to resubmit video URB (-19).
[ 455.253681] uvcvideo 4-4:1.1: Failed to resubmit video URB (-19).EDIT: After rebooting, it now works, for no apparent reason. After rebooting, sometime it works, sometime it doesn't. I still have no idea why, anyway, guvcview is working fine at the present time, and I managed to correctly setup my webcam, I hope it will continue to work.
Last edited by PonchoVire (2022-05-12 10:33:38)
Offline