You are not logged in.

#1 2021-03-09 17:32:52

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 6,124

[Solved] Fan runs madly on cool X270 after sleep following updates

Yesterday, following a system update on a ThinkPad X270,  the fan started running continuously even when the laptop is cool. However, it does not do this if I shut down and reboot. It happens after waking from sleep or continues if the machine is simply rebooted.

In over three years, I've not seen the fan spin up like this unless the temperatures shown by lm-sensors really are high. And as long as I don't suspend, things behave equally nicely. But suspend for a moment and fan-hell breaks lose when the machine is woken, even though everything remains perfectly cool. (Well, I dare say the fan gets a bit hot and bothered but everything lm-sensors measures stays cool and the air blown out is definitely chilly.)

I'm loading Intel firmware with initrd:

root=/dev/vgcfr/arch rw cryptdevice=/dev/disk/by-uuid/NUMBERS-letters-StUfF:Linux:allow-discards add_efi_memmap fbcon=scrollback:200k initrd=intel-ucode.img rd.luks.options=discard initrd=\initramfs-linux.img

Pacman's log shows the following updates

[2021-03-08T21:13:16+0000] [PACMAN] Running 'pacman -Syu'
[2021-03-08T21:13:16+0000] [PACMAN] synchronizing package lists
[2021-03-08T21:13:23+0000] [PACMAN] starting full system upgrade
[2021-03-08T21:19:36+0000] [ALPM] running '05-etckeeper-pre-install.hook'...
[2021-03-08T21:19:37+0000] [ALPM-SCRIPTLET] [master bdb3d4f] saving uncommitted changes in /etc prior to pacmatic run
[2021-03-08T21:19:37+0000] [ALPM-SCRIPTLET]  1 file changed, 1 insertion(+), 2 deletions(-)
[2021-03-08T21:19:37+0000] [ALPM] running '60-mkinitcpio-remove.hook'...
[2021-03-08T21:19:37+0000] [ALPM] running 'ghc-unregister.hook'...
[2021-03-08T21:19:43+0000] [ALPM] transaction started
[2021-03-08T21:19:43+0000] [ALPM] upgraded openssl (1.1.1.i-2 -> 1.1.1.j-1)
[2021-03-08T21:19:43+0000] [ALPM] upgraded libxcrypt (4.4.17-1 -> 4.4.18-1)
[2021-03-08T21:19:43+0000] [ALPM] upgraded e2fsprogs (1.46.1-1 -> 1.46.2-1)
[2021-03-08T21:19:43+0000] [ALPM] upgraded libgcrypt (1.9.1-1 -> 1.9.2-1)
[2021-03-08T21:19:43+0000] [ALPM] upgraded ca-certificates-mozilla (3.61-1 -> 3.62-1)
[2021-03-08T21:19:43+0000] [ALPM] upgraded libelf (0.182-1 -> 0.183-3)
[2021-03-08T21:19:43+0000] [ALPM] upgraded kbd (2.3.0-2 -> 2.4.0-2)
[2021-03-08T21:19:43+0000] [ALPM] upgraded device-mapper (2.03.11-4 -> 2.03.11-5)
[2021-03-08T21:19:43+0000] [ALPM] warning: /etc/mkinitcpio.conf installed as /etc/mkinitcpio.conf.pacnew
[2021-03-08T21:19:43+0000] [ALPM] upgraded mkinitcpio (29-1 -> 30-1)
[2021-03-08T21:19:44+0000] [ALPM] upgraded linux (5.10.16.arch1-1 -> 5.11.4.arch1-1)
[2021-03-08T21:19:44+0000] [ALPM] upgraded acpi_call (1.2.1-28 -> 1.2.1-34)
[2021-03-08T21:19:45+0000] [ALPM] upgraded linux-lts (5.4.98-1 -> 5.10.21-1)
[2021-03-08T21:19:45+0000] [ALPM] upgraded acpi_call-lts (1.2.1-26 -> 1.2.1-33)
[2021-03-08T21:19:45+0000] [ALPM] upgraded alsa-card-profiles (1:0.3.21-1 -> 1:0.3.23-1)
[2021-03-08T21:19:45+0000] [ALPM] upgraded nettle (3.7-1 -> 3.7.1-1)
[2021-03-08T21:19:45+0000] [ALPM] upgraded appstream (0.14.0-4 -> 0.14.3-1)
[2021-03-08T21:19:45+0000] [ALPM] upgraded libunwind (1.4.0-1 -> 1.5.0-1)
[2021-03-08T21:19:45+0000] [ALPM] upgraded llvm-libs (11.0.1-2 -> 11.1.0-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded lm_sensors (3.6.0-2 -> 1:3.6.0.r41.g31d1f125-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded vulkan-icd-loader (1.2.169-1 -> 1.2.171-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded xorgproto (2020.1-1 -> 2021.3-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded libx11 (1.7.0-3 -> 1.7.0-4)
[2021-03-08T21:19:46+0000] [ALPM] upgraded mesa (20.3.4-1 -> 20.3.4-3)
[2021-03-08T21:19:46+0000] [ALPM] upgraded libwacom (1.8-1 -> 1.9-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded libinput (1.16.4-1 -> 1.17.0-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded xkeyboard-config (2.31-1 -> 2.32-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded libxkbcommon (1.0.3-1 -> 1.1.0-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded libxkbcommon-x11 (1.0.3-1 -> 1.1.0-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded appstream-qt (0.14.0-4 -> 0.14.3-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded archlinux-appstream-data (20210125-1 -> 20210218-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded aspell-en (2019.10.06-1 -> 2020.12.07-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded babl (0.1.82-1 -> 0.1.84-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded elfutils (0.182-1 -> 0.183-3)
[2021-03-08T21:19:46+0000] [ALPM] upgraded binutils (2.36-3 -> 2.36.1-2)
[2021-03-08T21:19:46+0000] [ALPM] upgraded bluez (5.55-2 -> 5.56-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded openal (1.21.0-1 -> 1.21.1-1)
[2021-03-08T21:19:46+0000] [ALPM] upgraded libdatrie (0.2.12-2 -> 0.2.13-1)
[2021-03-08T21:19:47+0000] [ALPM] upgraded python (3.9.1-2 -> 3.9.2-1)
[2021-03-08T21:19:47+0000] [ALPM] upgraded js78 (78.7.1-1 -> 78.8.0-1)
[2021-03-08T21:19:47+0000] [ALPM] upgraded btrfs-progs (5.10.1-1 -> 5.10.1-3)
[2021-03-08T21:19:47+0000] [ALPM] upgraded lvm2 (2.03.11-4 -> 2.03.11-5)
[2021-03-08T21:19:47+0000] [ALPM] upgraded nss (3.61-1 -> 3.62-1)
[2021-03-08T21:19:47+0000] [ALPM] upgraded bluedevil (1:5.20.5-1 -> 1:5.21.2-1)
[2021-03-08T21:19:47+0000] [ALPM] upgraded bluez-libs (5.55-2 -> 5.56-1)
[2021-03-08T21:19:47+0000] [ALPM] upgraded kdecoration (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:47+0000] [ALPM] upgraded breeze (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:47+0000] [ALPM] upgraded breeze-gtk (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:47+0000] [ALPM] installed python-cchardet (2.1.7-2)
[2021-03-08T21:19:47+0000] [ALPM] upgraded python-setuptools (1:53.0.0-1 -> 1:53.1.0-1)
[2021-03-08T21:19:47+0000] [ALPM] upgraded python-pygments (2.7.4-1 -> 2.8.1-1)
[2021-03-08T21:19:48+0000] [ALPM] upgraded python-pyqt5 (5.15.2-3 -> 5.15.3-2)
[2021-03-08T21:19:48+0000] [ALPM] upgraded dav1d (0.8.1-2 -> 0.8.2-1)
[2021-03-08T21:19:48+0000] [ALPM] upgraded libibus (1.5.23+3+gaa558de8-3 -> 1.5.24-1)
[2021-03-08T21:19:48+0000] [ALPM] upgraded sysfsutils (2.1.0-11 -> 2.1.1-1)
[2021-03-08T21:19:48+0000] [ALPM] upgraded ffmpeg (2:4.3.1-4 -> 2:4.3.2-1)
[2021-03-08T21:19:48+0000] [ALPM] upgraded ttf-liberation (2.1.2-1 -> 2.1.3-1)
[2021-03-08T21:19:48+0000] [ALPM] upgraded qt5-webengine (5.15.2-5 -> 5.15.3-2)
[2021-03-08T21:19:48+0000] [ALPM] upgraded python-pyqt5-webengine (5.15.2-1 -> 5.15.3-1)
[2021-03-08T21:19:48+0000] [ALPM] upgraded libimagequant (2.13.1-1 -> 2.14.1-1)
[2021-03-08T21:19:48+0000] [ALPM] upgraded libunrar (1:6.0.3-1 -> 1:6.0.4-1)
[2021-03-08T21:19:49+0000] [ALPM] upgraded calibre (5.11.0-1 -> 5.12.0-1)
[2021-03-08T21:19:49+0000] [ALPM] upgraded gtk3 (1:3.24.25-1 -> 1:3.24.26-1)
[2021-03-08T21:19:50+0000] [ALPM] upgraded chromium (88.0.4324.150-1 -> 89.0.4389.82-1)
[2021-03-08T21:19:50+0000] [ALPM] upgraded cmake (3.19.5-1 -> 3.19.6-1)
[2021-03-08T21:19:50+0000] [ALPM] upgraded detox (1.4.0-1 -> 1.4.1-1)
[2021-03-08T21:19:50+0000] [ALPM] upgraded discover (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:51+0000] [ALPM] upgraded libphobos (1:2.095.0-1 -> 1:2.095.1-1)
[2021-03-08T21:19:51+0000] [ALPM] upgraded dmd (1:2.095.0-1 -> 1:2.095.1-1)
[2021-03-08T21:19:51+0000] [ALPM] upgraded syntax-highlighting (5.79.0-1 -> 5.79.1-1)
[2021-03-08T21:19:51+0000] [ALPM] upgraded drkonqi (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:51+0000] [ALPM] upgraded enchant (2.2.13-2 -> 2.2.15-1)
[2021-03-08T21:19:51+0000] [ALPM] upgraded fakeroot (1.25.3-1 -> 1.25.3-2)
[2021-03-08T21:19:52+0000] [ALPM] upgraded firefox (85.0.2-1 -> 86.0-2)
[2021-03-08T21:19:52+0000] [ALPM] upgraded firefox-i18n-cy (85.0.2-1 -> 86.0-1)
[2021-03-08T21:19:52+0000] [ALPM] upgraded firefox-i18n-en-gb (85.0.2-1 -> 86.0-1)
[2021-03-08T21:19:52+0000] [ALPM] upgraded firefox-noscript (11.2-1 -> 11.2.3-1)
[2021-03-08T21:19:52+0000] [ALPM] installed svt-av1 (0.8.6-2)
[2021-03-08T21:19:52+0000] [ALPM] installed libyuv (r2212+dfaf7534-2)
[2021-03-08T21:19:52+0000] [ALPM] installed libavif (0.9.0-1)
[2021-03-08T21:19:52+0000] [ALPM] upgraded gd (2.3.1-1 -> 2.3.2-2)
[2021-03-08T21:19:52+0000] [ALPM] upgraded libgexiv2 (0.12.1-4 -> 0.12.2-1)
[2021-03-08T21:19:52+0000] [ALPM] upgraded suitesparse (5.8.1-1 -> 5.9.0-1)
[2021-03-08T21:19:52+0000] [ALPM] upgraded poppler (21.02.0-1 -> 21.03.0-1)
[2021-03-08T21:19:52+0000] [ALPM] upgraded poppler-glib (21.02.0-1 -> 21.03.0-1)
[2021-03-08T21:19:52+0000] [ALPM] upgraded gegl (0.4.26-1 -> 0.4.28-2)
[2021-03-08T21:19:52+0000] [ALPM] upgraded gendesk (1.0.6-1 -> 1.0.8-1)
[2021-03-08T21:19:52+0000] [ALPM] upgraded graphviz (2.46.0-1 -> 2.46.1-1)
[2021-03-08T21:19:53+0000] [ALPM] upgraded gimp (2.10.22-1 -> 2.10.22-2)
[2021-03-08T21:19:53+0000] [ALPM] upgraded spirv-tools (2020.4-1 -> 2020.6-1)
[2021-03-08T21:19:53+0000] [ALPM] upgraded glslang (11.1.0-1 -> 11.2.0-1)
[2021-03-08T21:19:53+0000] [ALPM] upgraded gtkmm3 (3.24.3-1 -> 3.24.4-1)
[2021-03-08T21:19:53+0000] [ALPM] upgraded libkipi (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:53+0000] [ALPM] upgraded libkdcraw (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:53+0000] [ALPM] upgraded poppler-qt5 (21.02.0-1 -> 21.03.0-1)
[2021-03-08T21:19:53+0000] [ALPM] upgraded taglib (1.11.1-4 -> 1.12-1)
[2021-03-08T21:19:53+0000] [ALPM] upgraded libzip (1.7.3-1 -> 1.7.3-2)
[2021-03-08T21:19:53+0000] [ALPM] upgraded signon-kwallet-extension (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:53+0000] [ALPM] upgraded kaccounts-integration (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:53+0000] [ALPM] upgraded gwenview (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-hashable (1.3.0.0-95 -> 1.3.1.0-11)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-primitive (0.7.1.0-90 -> 0.7.1.0-104)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-scientific (0.3.6.2-84 -> 0.3.6.2-91)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-attoparsec (0.13.2.5-4 -> 0.13.2.5-11)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-base-compat-batteries (0.11.2-71 -> 0.11.2-85)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-data-fix (0.3.1-6 -> 0.3.1-13)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-dlist (1.0-54 -> 1.0-62)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-base-orphans (0.8.4-60 -> 0.8.4-74)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-distributive (0.6.2.1-43 -> 0.6.2.1-63)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-comonad (5.0.8-42 -> 5.0.8-59)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-bifunctors (5.5.10-27 -> 5.5.10-45)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-assoc (1.0.2-58 -> 1.0.2-65)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-these (1.1.1.1-59 -> 1.1.1.1-66)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-strict (0.4.0.1-32 -> 0.4.0.1-39)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-time-compat (1.9.5-32 -> 1.9.5-39)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-unordered-containers (0.2.13.0-43 -> 0.2.13.0-50)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-splitmix (0.1.0.3-66 -> 0.1.0.3-80)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-random (1.2.0-152 -> 1.2.0-175)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-uuid-types (1.0.3-89 -> 1.0.3-96)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-vector (0.12.2.0-22 -> 0.12.2.0-38)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-aeson (1.5.5.1-23 -> 1.5.6.0-6)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-cmdargs (0.10.20-16 -> 0.10.21-1)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-aeson-pretty (0.8.8-134 -> 0.8.8-144)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-colour (2.3.5-136 -> 2.3.5-150)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-ansi-terminal (0.11-78 -> 0.11-92)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-hourglass (0.2.12-113 -> 0.2.12-120)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-memory (0.15.0-80 -> 0.15.0-87)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-asn1-types (0.3.4-68 -> 0.3.4-75)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-asn1-encoding (0.9.6-89 -> 0.9.6-96)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-asn1-parse (0.9.5-89 -> 0.9.5-96)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-async (2.2.2-99 -> 2.2.3-13)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-base16-bytestring (1.0.1.0-27 -> 1.0.1.0-34)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-base64-bytestring (1.2.0.1-34 -> 1.2.0.1-41)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-blaze-markup (0.8.2.7-59 -> 0.8.2.8-3)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-blaze-html (0.9.1.2-89 -> 0.9.1.2-97)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-case-insensitive (1.2.1.0-70 -> 1.2.1.0-77)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-data-default-instances-dlist (0.0.1-131 -> 0.0.1-139)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-data-default (0.7.1.1-118 -> 0.7.1.1-126)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-quickcheck (2.14.2-102 -> 2.14.2-122)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-syb (0.7.2.1-16 -> 0.7.2.1-29)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-pandoc-types (1.22-53 -> 1.22-62)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-uniplate (1.6.13-36 -> 1.6.13-43)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-split (0.2.3.4-112 -> 0.2.3.4-119)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-vector-algorithms (0.8.0.4-32 -> 0.8.0.4-39)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-mono-traversable (1.0.15.1-108 -> 1.0.15.1-117)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-resourcet (1.2.4.2-62 -> 1.2.4.2-69)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-conduit (1.3.4-37 -> 1.3.4.1-4)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-network (3.1.2.1-32 -> 3.1.2.1-39)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-zlib (0.6.2.2-5 -> 0.6.2.3-7)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-streaming-commons (0.2.2.1-59 -> 0.2.2.1-67)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-typed-process (0.2.6.0-94 -> 0.2.6.0-101)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-conduit-extra (1.3.5-105 -> 1.3.5-116)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-xml-conduit (1.9.0.0-113 -> 1.9.1.0-5)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-citeproc (0.3.0.4-2 -> 0.3.0.8-3)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-cmark-gfm (0.2.2-46 -> 0.2.2-53)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-commonmark (0.1.1.4-3 -> 0.1.1.4-10)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-emojis (0.1-78 -> 0.1-85)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-commonmark-extensions (0.2.0.4-34 -> 0.2.0.4-41)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-commonmark-pandoc (0.2.0.1-71 -> 0.2.0.1-80)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-socks (0.6.1-90 -> 0.6.1-97)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-cryptonite (0.28-10 -> 0.28-17)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-pem (0.2.4-145 -> 0.2.4-152)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-x509 (1.7.5-124 -> 1.7.5-131)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-x509-store (1.6.7-123 -> 1.6.7-130)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-x509-validation (1.6.11-123 -> 1.6.11-130)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-tls (1.5.5-4 -> 1.5.5-11)
[2021-03-08T21:19:53+0000] [ALPM] upgraded haskell-x509-system (1.6.6-191 -> 1.6.6-198)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-connection (0.3.1-100 -> 0.3.1-107)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-doclayout (0.3-77 -> 0.3-84)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-hsyaml (0.2.1.0-83 -> 0.2.1.0-90)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-text-conversions (0.3.1-48 -> 0.3.1-55)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-doctemplates (0.9-20 -> 0.9-29)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-foundation (0.0.25-86 -> 0.0.25-93)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-glob (0.10.1-59 -> 0.10.1-66)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-haddock-library (1.9.0-103 -> 1.9.0-117)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-hslua (1.3.0.1-4 -> 1.3.0.1-15)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-temporary (1.3-208 -> 1.3-226)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-hslua-module-system (0.2.2.1-59 -> 0.2.2.1-70)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-hslua-module-text (0.3.0.1-47 -> 0.3.0.1-58)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-th-compat (0.1.1-4 -> 0.1.1-11)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-network-uri (2.6.4.0-2 -> 2.6.4.1-6)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-http (4000.3.15-103 -> 4000.3.15-126)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-http-types (0.12.3-135 -> 0.12.3-142)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-http-client (0.7.5-11 -> 0.7.6-5)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-http-client-tls (0.3.5.3-386 -> 0.3.5.3-396)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-hxt-charproperties (9.4.0.0-9 -> 9.5.0.0-1)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-hxt-regex-xmlschema (9.2.0.3-25 -> 9.2.0.7-2)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-hxt-unicode (9.0.2.4-21 -> 9.0.2.4-22)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-hxt (9.3.1.21-6 -> 9.3.1.21-16)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-ipynb (0.1.0.1-169 -> 0.1.0.1-183)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-jira-wiki-markup (1.3.2-58 -> 1.3.3-5)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-juicypixels (3.3.5-68 -> 3.3.5-76)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-libyaml (0.1.2-110 -> 0.1.2-120)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-transformers-base (0.4.5.2-129 -> 0.4.5.2-136)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-monad-control (1.0.2.3-131 -> 1.0.2.3-138)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-lifted-base (0.2.3.12-131 -> 0.2.3.12-138)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-math-functions (0.3.4.1-110 -> 0.3.4.1-128)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-mmorph (1.1.4-2 -> 1.1.5-1)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-mwc-random (0.15.0.1-143 -> 0.15.0.1-164)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-regex-base (0.94.0.0-8 -> 0.94.0.1-1)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-regex-pcre (0.95.0.0-8 -> 0.95.0.0-9)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-utf8-string (1.0.2-17 -> 1.0.2-24)
[2021-03-08T21:19:54+0000] [ALPM] upgraded haskell-skylighting-core (0.10.2-24 -> 0.10.3-1)
[2021-03-08T21:19:55+0000] [ALPM] upgraded haskell-skylighting (0.10.2-24 -> 0.10.3-1)
[2021-03-08T21:19:55+0000] [ALPM] upgraded haskell-tagsoup (0.14.8-93 -> 0.14.8-100)
[2021-03-08T21:19:55+0000] [ALPM] upgraded haskell-texmath (0.12.1.1-6 -> 0.12.1.1-16)
[2021-03-08T21:19:55+0000] [ALPM] upgraded haskell-tf-random (0.5-222 -> 0.5-249)
[2021-03-08T21:19:55+0000] [ALPM] upgraded haskell-unicode-transforms (0.3.7.1-42 -> 0.3.7.1-50)
[2021-03-08T21:19:55+0000] [ALPM] upgraded haskell-vector-th-unbox (0.2.1.7-140 -> 0.2.1.9-2)
[2021-03-08T21:19:55+0000] [ALPM] upgraded haskell-yaml (0.11.5.0-82 -> 0.11.5.0-94)
[2021-03-08T21:19:55+0000] [ALPM] upgraded haskell-zip-archive (0.4.1-97 -> 0.4.1-105)
[2021-03-08T21:19:55+0000] [ALPM] upgraded hdparm (9.58-3 -> 9.60-1)
[2021-03-08T21:19:55+0000] [ALPM] upgraded imagemagick (7.0.11.0-1 -> 7.0.11.3-1)
[2021-03-08T21:19:55+0000] [ALPM] upgraded qpdf (10.1.0-1 -> 10.3.0-1)
[2021-03-08T21:19:55+0000] [ALPM] warning: directory permissions differ on /usr/share/hplip/base/__pycache__/
[2021-03-08T21:19:55+0000] [ALPM] warning: directory permissions differ on /usr/share/hplip/base/pexpect/__pycache__/
[2021-03-08T21:19:55+0000] [ALPM] warning: directory permissions differ on /usr/share/hplip/installer/__pycache__/
[2021-03-08T21:19:55+0000] [ALPM] warning: directory permissions differ on /usr/share/hplip/prnt/__pycache__/
[2021-03-08T21:19:55+0000] [ALPM] upgraded hplip (1:3.20.11-2 -> 1:3.21.2-1)
[2021-03-08T21:19:55+0000] [ALPM] upgraded hugo (0.80.0-1 -> 0.81.0-1)
[2021-03-08T21:19:55+0000] [ALPM] upgraded inkscape (1.0.2-3 -> 1.0.2-4)
[2021-03-08T21:19:56+0000] [ALPM] upgraded intel-ucode (20201118-1 -> 20210216-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded iproute2 (5.10.0-2 -> 5.11.0-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded kactivitymanagerd (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded kate (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded kcharselect (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded kcolorchooser (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded kde-cli-tools (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded kde-gtk-config (5.20.5-2 -> 5.21.2-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded libkexiv2 (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded kdegraphics-thumbnailers (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded libksysguard (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded milou (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded kscreenlocker (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded kwayland-server (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded sbc (1.5-1 -> 1.5-2)
[2021-03-08T21:19:56+0000] [ALPM] upgraded pipewire (1:0.3.21-1 -> 1:0.3.23-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded kwin (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded plasma-integration (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:56+0000] [ALPM] upgraded libkscreen (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:57+0000] [ALPM] upgraded plasma-workspace (5.20.5-2 -> 5.21.2-1)
[2021-03-08T21:19:57+0000] [ALPM] upgraded kdeplasma-addons (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:57+0000] [ALPM] upgraded kdialog (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:57+0000] [ALPM] upgraded systemsettings (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:57+0000] [ALPM] upgraded kgamma5 (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:57+0000] [ALPM] upgraded khelpcenter (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:57+0000] [ALPM] upgraded khotkeys (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:57+0000] [ALPM] upgraded kimageformats (5.79.0-1 -> 5.79.0-2)
[2021-03-08T21:19:57+0000] [ALPM] upgraded kinfocenter (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded kio-extras (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded kmenuedit (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded kmix (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded konsole (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded kscreen (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded ksshaskpass (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded ksysguard (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded kwallet-pam (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded kwayland-integration (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded kwrite (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded kwrited (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded libgphoto2 (2.5.26-1 -> 2.5.27-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded libmm-glib (1.14.10-1 -> 1.16.2-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded libnm (1.28.1dev+16+gdaad4e2fee-1 -> 1.30.0-2)
[2021-03-08T21:19:58+0000] [ALPM] upgraded shaderc (2020.3-1 -> 2020.3-2)
[2021-03-08T21:19:58+0000] [ALPM] upgraded libplacebo (3.104.0-1 -> 3.104.0-2)
[2021-03-08T21:19:58+0000] [ALPM] installed libqrtr-glib (1.0.0-1)
[2021-03-08T21:19:58+0000] [ALPM] upgraded libqmi (1.26.10-1 -> 1.28.2-1)
[2021-03-08T21:20:00+0000] [ALPM] upgraded libreoffice-fresh (7.1.0-1 -> 7.1.1-1)
[2021-03-08T21:20:00+0000] [ALPM] upgraded libreoffice-fresh-cy (7.1.0-1 -> 7.1.1-1)
[2021-03-08T21:20:00+0000] [ALPM] upgraded libreoffice-fresh-en-gb (7.1.0-1 -> 7.1.1-1)
[2021-03-08T21:20:00+0000] [ALPM] upgraded lostfiles (4.08-1 -> 4.09-1)
[2021-03-08T21:20:00+0000] [ALPM] upgraded mariadb-libs (10.5.8-1 -> 10.5.9-1)
[2021-03-08T21:20:00+0000] [ALPM] upgraded meson (0.57.0-1 -> 0.57.1-1)
[2021-03-08T21:20:00+0000] [ALPM] upgraded modemmanager (1.14.10-1 -> 1.16.2-1)
[2021-03-08T21:20:00+0000] [ALPM] upgraded nano (5.5-1 -> 5.6.1-1)
[2021-03-08T21:20:00+0000] [ALPM] upgraded procps-ng (3.3.16-3 -> 3.3.17-1)
[2021-03-08T21:20:01+0000] [ALPM] upgraded networkmanager (1.28.1dev+16+gdaad4e2fee-1 -> 1.30.0-2)
[2021-03-08T21:20:01+0000] [ALPM] upgraded okular (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:20:01+0000] [ALPM] upgraded openssh (8.4p1-2 -> 8.5p1-1)
[2021-03-08T21:20:01+0000] [ALPM] upgraded oxygen (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:01+0000] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2021-03-08T21:20:01+0000] [ALPM] upgraded pacman-mirrorlist (20210214-1 -> 20210302-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded pandoc (2.11.3-39 -> 2.11.4-2)
[2021-03-08T21:20:02+0000] [ALPM] upgraded plasma-browser-integration (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded polkit-kde-agent (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded plasma-desktop (5.20.5-2 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded plasma-disks (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] installed plasma-firewall (5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded plasma-nm (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded plasma-workspace-wallpapers (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded plasma-pa (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded plasma-sdk (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] installed plasma-systemmonitor (5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded plasma-thunderbolt (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded plasma-vault (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded sddm-kcm (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] installed ddcutil (1.0.1-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded powerdevil (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded xdg-desktop-portal-kde (5.20.5-1 -> 5.21.2-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded plasma-meta (5.20-1 -> 5.21-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded print-manager (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded python-cryptography (3.3.1-1 -> 3.4.6-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded python-dulwich (0.20.19-1 -> 0.20.20-1)
[2021-03-08T21:20:02+0000] [ALPM] upgraded python-zipp (3.4.0-3 -> 3.4.1-1)
[2021-03-08T21:20:03+0000] [ALPM] upgraded python-pytest (6.2.1-1 -> 6.2.2-1)
[2021-03-08T21:20:03+0000] [ALPM] upgraded qt5-tools (5.15.2-2 -> 5.15.2-3)
[2021-03-08T21:20:03+0000] [ALPM] upgraded refind (0.12.0-6 -> 0.13.1-1)
[2021-03-08T21:20:03+0000] [ALPM] upgraded s-nail (14.9.20-1 -> 14.9.21-1)
[2021-03-08T21:20:03+0000] [ALPM] warning: /etc/sane.d/canon_lide70.conf installed as /etc/sane.d/canon_lide70.conf.pacnew
[2021-03-08T21:20:03+0000] [ALPM] warning: /etc/sane.d/escl.conf installed as /etc/sane.d/escl.conf.pacnew
[2021-03-08T21:20:03+0000] [ALPM] upgraded sane (1.0.31-3 -> 1.0.32-3)
[2021-03-08T21:20:03+0000] [ALPM] upgraded screen (4.8.0-2 -> 4.8.0-3)
[2021-03-08T21:20:03+0000] [ALPM] upgraded sip4 (4.19.24-1 -> 4.19.25-1)
[2021-03-08T21:20:03+0000] [ALPM] upgraded spectacle (20.12.2-2 -> 20.12.3-1)
[2021-03-08T21:20:03+0000] [ALPM] upgraded subversion (1.14.0-4 -> 1.14.1-1)
[2021-03-08T21:20:03+0000] [ALPM] upgraded svgpart (20.12.2-1 -> 20.12.3-1)
[2021-03-08T21:20:04+0000] [ALPM] upgraded thunderbird (78.7.1-1 -> 78.8.0-1)
[2021-03-08T21:20:04+0000] [ALPM] upgraded thunderbird-i18n-cy (78.7.1-1 -> 78.8.0-1)
[2021-03-08T21:20:04+0000] [ALPM] upgraded thunderbird-i18n-en-gb (78.7.1-1 -> 78.8.0-1)
[2021-03-08T21:20:04+0000] [ALPM] upgraded wireless-regdb (2020.04.29-1 -> 2020.11.20-1)
[2021-03-08T21:20:04+0000] [ALPM] upgraded x86_energy_perf_policy (5.10-2 -> 5.11-1)
[2021-03-08T21:20:04+0000] [ALPM] transaction completed
[2021-03-08T21:20:06+0000] [ALPM] running '20-systemd-sysusers.hook'...
[2021-03-08T21:20:06+0000] [ALPM-SCRIPTLET] Creating group saned with gid 989.
[2021-03-08T21:20:06+0000] [ALPM-SCRIPTLET] Creating user saned (SANE daemon user) with uid 989 and gid 989.
[2021-03-08T21:20:06+0000] [ALPM] running '30-systemd-daemon-reload.hook'...
[2021-03-08T21:20:06+0000] [ALPM] running '30-systemd-hwdb.hook'...
[2021-03-08T21:20:07+0000] [ALPM] running '30-systemd-tmpfiles.hook'...
[2021-03-08T21:20:07+0000] [ALPM] running '30-systemd-udev-reload.hook'...
[2021-03-08T21:20:07+0000] [ALPM] running '30-systemd-update.hook'...
[2021-03-08T21:20:07+0000] [ALPM] running '40-update-ca-trust.hook'...
[2021-03-08T21:20:07+0000] [ALPM] running '60-depmod.hook'...
[2021-03-08T21:20:25+0000] [ALPM] running '90-mkinitcpio-install.hook'...
[2021-03-08T21:20:25+0000] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
[2021-03-08T21:20:25+0000] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
[2021-03-08T21:20:25+0000] [ALPM-SCRIPTLET] ==> Starting build: 5.10.21-1-lts
[2021-03-08T21:20:25+0000] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2021-03-08T21:20:25+0000] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2021-03-08T21:20:25+0000] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2021-03-08T21:20:25+0000] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2021-03-08T21:20:25+0000] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2021-03-08T21:20:25+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2021-03-08T21:20:25+0000] [ALPM-SCRIPTLET]   -> Running build hook: [encrypt]
[2021-03-08T21:20:27+0000] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2021-03-08T21:20:27+0000] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2021-03-08T21:20:27+0000] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2021-03-08T21:20:27+0000] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2021-03-08T21:20:27+0000] [ALPM-SCRIPTLET]   -> Running build hook: [shutdown]
[2021-03-08T21:20:28+0000] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2021-03-08T21:20:28+0000] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-lts.img
[2021-03-08T21:20:28+0000] [ALPM-SCRIPTLET] ==> Image generation successful
[2021-03-08T21:20:28+0000] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
[2021-03-08T21:20:28+0000] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
[2021-03-08T21:20:28+0000] [ALPM-SCRIPTLET] ==> Starting build: 5.10.21-1-lts
[2021-03-08T21:20:28+0000] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2021-03-08T21:20:28+0000] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2021-03-08T21:20:28+0000] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2021-03-08T21:20:28+0000] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2021-03-08T21:20:29+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: wd719x
[2021-03-08T21:20:30+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2021-03-08T21:20:30+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2021-03-08T21:20:31+0000] [ALPM-SCRIPTLET]   -> Running build hook: [encrypt]
[2021-03-08T21:20:32+0000] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2021-03-08T21:20:32+0000] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2021-03-08T21:20:33+0000] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2021-03-08T21:20:34+0000] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2021-03-08T21:20:34+0000] [ALPM-SCRIPTLET]   -> Running build hook: [shutdown]
[2021-03-08T21:20:36+0000] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2021-03-08T21:20:36+0000] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-lts-fallback.img
[2021-03-08T21:20:37+0000] [ALPM-SCRIPTLET] ==> Image generation successful
[2021-03-08T21:20:37+0000] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2021-03-08T21:20:37+0000] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2021-03-08T21:20:37+0000] [ALPM-SCRIPTLET] ==> Starting build: 5.11.4-arch1-1
[2021-03-08T21:20:37+0000] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2021-03-08T21:20:37+0000] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2021-03-08T21:20:37+0000] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2021-03-08T21:20:37+0000] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2021-03-08T21:20:37+0000] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2021-03-08T21:20:38+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2021-03-08T21:20:38+0000] [ALPM-SCRIPTLET]   -> Running build hook: [encrypt]
[2021-03-08T21:20:38+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: qat_4xxx
[2021-03-08T21:20:39+0000] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2021-03-08T21:20:39+0000] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2021-03-08T21:20:39+0000] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2021-03-08T21:20:39+0000] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2021-03-08T21:20:39+0000] [ALPM-SCRIPTLET]   -> Running build hook: [shutdown]
[2021-03-08T21:20:40+0000] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2021-03-08T21:20:40+0000] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: /boot/initramfs-linux.img
[2021-03-08T21:20:41+0000] [ALPM-SCRIPTLET] ==> Image generation successful
[2021-03-08T21:20:41+0000] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2021-03-08T21:20:41+0000] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2021-03-08T21:20:41+0000] [ALPM-SCRIPTLET] ==> Starting build: 5.11.4-arch1-1
[2021-03-08T21:20:41+0000] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2021-03-08T21:20:41+0000] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2021-03-08T21:20:41+0000] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2021-03-08T21:20:41+0000] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2021-03-08T21:20:42+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: wd719x
[2021-03-08T21:20:42+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2021-03-08T21:20:43+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2021-03-08T21:20:44+0000] [ALPM-SCRIPTLET]   -> Running build hook: [encrypt]
[2021-03-08T21:20:44+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: qat_4xxx
[2021-03-08T21:20:45+0000] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2021-03-08T21:20:45+0000] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2021-03-08T21:20:46+0000] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2021-03-08T21:20:47+0000] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2021-03-08T21:20:47+0000] [ALPM-SCRIPTLET]   -> Running build hook: [shutdown]
[2021-03-08T21:20:49+0000] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2021-03-08T21:20:49+0000] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-fallback.img
[2021-03-08T21:20:50+0000] [ALPM-SCRIPTLET] ==> Image generation successful
[2021-03-08T21:20:50+0000] [ALPM] running 'dbus-reload.hook'...
[2021-03-08T21:20:50+0000] [ALPM] running 'detect-old-perl-modules.hook'...
[2021-03-08T21:20:50+0000] [ALPM] running 'fontconfig.hook'...
[2021-03-08T21:20:51+0000] [ALPM] running 'gdk-pixbuf-query-loaders.hook'...
[2021-03-08T21:20:51+0000] [ALPM] running 'ghc-register.hook'...
[2021-03-08T21:20:56+0000] [ALPM] running 'glib-compile-schemas.hook'...
[2021-03-08T21:20:56+0000] [ALPM] running 'gtk-query-immodules-3.0.hook'...
[2021-03-08T21:20:56+0000] [ALPM] running 'gtk-update-icon-cache.hook'...
[2021-03-08T21:20:56+0000] [ALPM] running 'texinfo-install.hook'...
[2021-03-08T21:20:56+0000] [ALPM] running 'update-appstream-cache.hook'...
[2021-03-08T21:20:57+0000] [ALPM-SCRIPTLET] AppStream cache update completed successfully.
[2021-03-08T21:20:57+0000] [ALPM] running 'update-desktop-database.hook'...
[2021-03-08T21:20:57+0000] [ALPM] running 'update-mime-database.hook'...
[2021-03-08T21:20:58+0000] [ALPM] running 'xorg-mkfontscale.hook'...
[2021-03-08T21:20:58+0000] [ALPM] running 'zz-etckeeper-post-install.hook'...
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET] [master 866953e] committing changes in /etc made by "/bin/bash /usr/bin/pacmatic -Syu"
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  53 files changed, 1093 insertions(+), 1003 deletions(-)
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  delete mode 120000 alsa/conf.d/50-pipewire.conf
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  create mode 100644 opt/edge/native-messaging-hosts/org.kde.plasma.browser_integration.json
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  create mode 100644 pipewire/client-rt.conf
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  create mode 100644 pipewire/client.conf
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  delete mode 100644 pipewire/media-session.d/alsa-monitor.conf
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  delete mode 100644 pipewire/media-session.d/bluez-monitor.conf
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  delete mode 100644 pipewire/media-session.d/media-session.conf
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  delete mode 100644 pipewire/media-session.d/v4l2-monitor.conf
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  create mode 100644 pipewire/pipewire-pulse.conf
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  rewrite pipewire/pipewire.conf (72%)
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  create mode 100644 profile.d/debuginfod.csh
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  create mode 100644 profile.d/debuginfod.sh
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  rewrite ssh/moduli (99%)
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  rewrite xdg/autostart/kaccess.desktop (95%)
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  mode change 100755 => 100644 xdg/autostart/klipper.desktop
[2021-03-08T21:20:58+0000] [ALPM-SCRIPTLET]  delete mode 100644 xinetd.d/sane
[2021-03-08T21:20:58+0000] [ALPM] running 'zzz-force-sync.hook'...
[2021-03-08 21:20] Exited with code 0
[2021-03-08T21:37:23+0000] [PACMAN] Running 'pacman -U /home/software/packages/zoom-5.5.4-1-x86_64.pkg.tar.zst'
[2021-03-08T21:37:25+0000] [ALPM] transaction started
[2021-03-08T21:37:26+0000] [ALPM] upgraded zoom (5.5.2-1 -> 5.5.4-1)
[2021-03-08T21:37:26+0000] [ALPM] transaction completed
[2021-03-08T21:37:26+0000] [ALPM] running '30-systemd-update.hook'...
[2021-03-08T21:37:26+0000] [ALPM] running 'update-desktop-database.hook'...
[2021-03-08T21:37:26+0000] [ALPM] running 'update-mime-database.hook'...
[2021-03-08T21:37:26+0000] [ALPM] running 'zzz-force-sync.hook'...
[2021-03-08 21:37] Exited with code 0
[2021-03-08T21:38:30+0000] [PACMAN] Running 'pacman -U /home/software/packages/xfig-3.2.8-1-x86_64.pkg.tar.zst'
[2021-03-08T21:38:32+0000] [ALPM] transaction started
[2021-03-08T21:38:33+0000] [ALPM] upgraded xfig (3.2.7-2 -> 3.2.8-1)
[2021-03-08T21:38:33+0000] [ALPM] transaction completed
[2021-03-08T21:38:33+0000] [ALPM] running '30-systemd-update.hook'...
[2021-03-08T21:38:33+0000] [ALPM] running 'update-desktop-database.hook'...
[2021-03-08T21:38:33+0000] [ALPM] running 'zzz-force-sync.hook'...
[2021-03-08 21:38] Exited with code 0
[2021-03-08 21:40] Exited with code 0
[2021-03-08 21:40] Exited with code 1
[2021-03-08 21:41] Exited with code 1
[2021-03-08 21:41] Exited with code 0

Did something change in `x86_energy_perf_policy` or elsewhere?

I was using thermald to manage thermal issues. Now, however, thermald no longer works on my machine.

systemctl status thermald.service 
● thermald.service - Thermal Daemon Service
     Loaded: loaded (/usr/lib/systemd/system/thermald.service; enabled; vendor preset: disabled)
     Active: inactive (dead) since Tue 2021-03-09 11:53:30 GMT; 26min ago
    Process: 497 ExecStart=/usr/bin/thermald --systemd --dbus-enable --adaptive (code=exited, status=0/SUCCESS)
   Main PID: 497 (code=exited, status=0/SUCCESS)

Maw 09 11:53:30 CyfrifiadurCFR systemd[1]: Starting Thermal Daemon Service...
Maw 09 11:53:30 CyfrifiadurCFR systemd[1]: Started Thermal Daemon Service.
Maw 09 11:53:30 CyfrifiadurCFR thermald[497]: 22 CPUID levels; family:model:stepping 0x6:8e:9 (6:142:9)
Maw 09 11:53:30 CyfrifiadurCFR thermald[497]: [/sys/devices/platform/thinkpad_acpi/dytc_lapmode] present: Thermald can't run on this platform
Maw 09 11:53:30 CyfrifiadurCFR thermald[497]: Unsupported cpu model or platform
Maw 09 11:53:30 CyfrifiadurCFR systemd[1]: thermald.service: Succeeded.

Searching the web, I can find the 'can't run' message reported for various T series laptops, though usually in the context of CPUs being throttled.

However, I'm not sure thermald is the main culprit because it was last upgraded a couple of weeks ago

[2021-02-16T02:27:20+0000] [ALPM] upgraded thermald (2.4.1-1 -> 2.4.2-1)

so the changes aren't new. Moreover, I've certainly rebooted a few times since mid February because I was running into a kernel bug which forced hard shutdowns.

I've just restarted the machine and the fan is silent. `sensors` gives

iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:        +41.0°C  

pch_skylake-virtual-0
Adapter: Virtual device
temp1:        +30.0°C  

BAT1-acpi-0
Adapter: ACPI interface
in0:          12.48 V  

nvme-pci-0400
Adapter: PCI adapter
Composite:    +20.9°C  (low  = -273.1°C, high = +69.8°C)
                       (crit = +79.8°C)

thinkpad-isa-0000
Adapter: ISA adapter
fan1:           0 RPM
temp1:        +33.0°C  
temp2:            N/A  
temp3:         +0.0°C  
temp4:         +0.0°C  
temp5:         +0.0°C  
temp6:         +0.0°C  
temp7:         +0.0°C  
temp8:         +0.0°C  
temp9:         +0.0°C  
temp10:        +0.0°C  
temp11:        +1.0°C  
temp12:        +0.0°C  
temp13:        +0.0°C  
temp14:        +0.0°C  
temp15:        +0.0°C  
temp16:        +0.0°C  

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +33.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +32.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +31.0°C  (high = +100.0°C, crit = +100.0°C)

BAT0-acpi-0
Adapter: ACPI interface
in0:          12.23 V  

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +33.0°C  (crit = +128.0°C)

But if I put the thing to sleep, the fan will run at 6000+ on waking and won't stop, though it might fall to, say, 4000 or so. It will do this even when the temperatures are well below 30 and the air blown out feels positively icy.

It is not that the fan keeps going once started. It ran for a few moments just now, but then stopped. It ran as I booted, as usual, but then stopped. So, prior to sleep, the fan seems to be controlled much as it always was, even without thermald. It is just after sleep it seems determined to cool a cold machine.

This is the journal for the last suspend before I rebooted. I can't even see anything about temperature changes or the fan, but I'm not sure if those messages depended on thermald.

Maw 09 11:03:43 CyfrifiadurCFR systemd-logind[439]: Lid closed.
Maw 09 11:03:43 CyfrifiadurCFR root[1770]: LID closed
Maw 09 11:03:43 CyfrifiadurCFR root[1772]: arg1 is button/lid, arg2 is LID, arg3 is close and arg4 is
Maw 09 11:03:43 CyfrifiadurCFR kded5[1041]: bluedevil: About to suspend
Maw 09 11:03:43 CyfrifiadurCFR kscreenlocker_greet[1773]: Qt: Session management error: networkIdsList argument is NULL
Maw 09 11:03:44 CyfrifiadurCFR kscreenlocker_greet[1773]: kf.coreaddons.desktopparser: Error: Could not find [Desktop Entry] group in  "/usr/share/sddm/themes/sddm-stellar-theme//metadat>
Maw 09 11:03:44 CyfrifiadurCFR kscreenlocker_greet[1773]: kf.coreaddons.desktopparser: Error: Could not find [Desktop Entry] group in  "/usr/share/sddm/themes/sddm-stellar-theme/metadata>
Maw 09 11:03:44 CyfrifiadurCFR kscreenlocker_greet[1773]: kf.coreaddons.desktopparser: Error: Could not find [Desktop Entry] group in  "/usr/share/sddm/themes/sddm-stellar-theme/metadata>
Maw 09 11:03:44 CyfrifiadurCFR systemd[1]: Reached target Sleep.
Maw 09 11:03:44 CyfrifiadurCFR systemd[1]: Starting Suspend...
Maw 09 11:03:44 CyfrifiadurCFR kscreenlocker_greet[1773]: libpng warning: iCCP: known incorrect sRGB profile
Maw 09 11:03:44 CyfrifiadurCFR kscreenlocker_greet[1773]: libpng warning: iCCP: known incorrect sRGB profile
Maw 09 11:03:44 CyfrifiadurCFR systemd-sleep[1785]: Suspending system...
Maw 09 11:03:44 CyfrifiadurCFR kernel: PM: suspend entry (deep)
Maw 09 11:03:49 CyfrifiadurCFR kernel: Filesystems sync: 0.006 seconds
Maw 09 11:03:49 CyfrifiadurCFR kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
Maw 09 11:03:49 CyfrifiadurCFR kernel: OOM killer disabled.
Maw 09 11:03:49 CyfrifiadurCFR kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Maw 09 11:03:49 CyfrifiadurCFR kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Maw 09 11:03:49 CyfrifiadurCFR kernel: wlan0: deauthenticating from 18:35:d1:c8:ec:09 by local choice (Reason: 3=DEAUTH_LEAVING)
Maw 09 11:03:49 CyfrifiadurCFR kernel: e1000e: EEE TX LPI TIMER: 00000011
Maw 09 11:03:49 CyfrifiadurCFR kernel: ACPI: EC: interrupt blocked
Maw 09 11:03:49 CyfrifiadurCFR kernel: ACPI: Preparing to enter system sleep state S3
Maw 09 11:03:49 CyfrifiadurCFR kernel: ACPI: EC: event blocked
Maw 09 11:03:49 CyfrifiadurCFR kernel: ACPI: EC: EC stopped
Maw 09 11:03:49 CyfrifiadurCFR kernel: PM: Saving platform NVS memory
Maw 09 11:03:49 CyfrifiadurCFR kernel: Disabling non-boot CPUs ...
Maw 09 11:03:49 CyfrifiadurCFR kernel: smpboot: CPU 1 is now offline
Maw 09 11:03:49 CyfrifiadurCFR kernel: smpboot: CPU 2 is now offline
Maw 09 11:03:49 CyfrifiadurCFR kernel: smpboot: CPU 3 is now offline
Maw 09 11:03:49 CyfrifiadurCFR kernel: ACPI: Low-level resume complete
Maw 09 11:03:49 CyfrifiadurCFR kernel: ACPI: EC: EC started
Maw 09 11:03:49 CyfrifiadurCFR kernel: PM: Restoring platform NVS memory
Maw 09 11:03:49 CyfrifiadurCFR kernel: Enabling non-boot CPUs ...
Maw 09 11:03:49 CyfrifiadurCFR kernel: x86: Booting SMP configuration:
Maw 09 11:03:49 CyfrifiadurCFR kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Maw 09 11:03:49 CyfrifiadurCFR kernel: CPU1 is up
Maw 09 11:03:49 CyfrifiadurCFR kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Maw 09 11:03:49 CyfrifiadurCFR kernel: CPU2 is up
Maw 09 11:03:49 CyfrifiadurCFR kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Maw 09 11:03:49 CyfrifiadurCFR kernel: CPU3 is up
Maw 09 11:03:49 CyfrifiadurCFR kernel: ACPI: Waking up from system sleep state S3
Maw 09 11:03:49 CyfrifiadurCFR kernel: ACPI: EC: interrupt unblocked
Maw 09 11:03:49 CyfrifiadurCFR kernel: ACPI: EC: event unblocked
Maw 09 11:03:49 CyfrifiadurCFR kernel: nvme nvme0: 4/0/0 default/read/poll queues
Maw 09 11:03:49 CyfrifiadurCFR kernel: usb 1-8: reset high-speed USB device number 4 using xhci_hcd
Maw 09 11:03:49 CyfrifiadurCFR kernel: usb 1-7: reset full-speed USB device number 3 using xhci_hcd
Maw 09 11:03:49 CyfrifiadurCFR kernel: psmouse serio1: synaptics: queried max coordinates: x [..5712], y [..4780]
Maw 09 11:03:49 CyfrifiadurCFR kernel: psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1074..]
Maw 09 11:03:49 CyfrifiadurCFR kernel: acpi LNXPOWER:02: Turning OFF
Maw 09 11:03:49 CyfrifiadurCFR kernel: acpi LNXPOWER:01: Turning OFF
Maw 09 11:03:49 CyfrifiadurCFR kernel: OOM killer enabled.
Maw 09 11:03:49 CyfrifiadurCFR kernel: Restarting tasks ... 
Maw 09 11:03:49 CyfrifiadurCFR kernel: mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
Maw 09 11:03:49 CyfrifiadurCFR systemd-logind[439]: Lid opened.
Maw 09 11:03:49 CyfrifiadurCFR kernel: done.
Maw 09 11:03:50 CyfrifiadurCFR kernel: Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
Maw 09 11:03:50 CyfrifiadurCFR kernel: Bluetooth: hci0: Device revision is 16
Maw 09 11:03:50 CyfrifiadurCFR kernel: Bluetooth: hci0: Secure boot is enabled
Maw 09 11:03:50 CyfrifiadurCFR kernel: Bluetooth: hci0: OTP lock is enabled
Maw 09 11:03:50 CyfrifiadurCFR kernel: Bluetooth: hci0: API lock is enabled
Maw 09 11:03:50 CyfrifiadurCFR kernel: Bluetooth: hci0: Debug lock is disabled
Maw 09 11:03:50 CyfrifiadurCFR kernel: Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Maw 09 11:03:50 CyfrifiadurCFR kernel: Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
Maw 09 11:03:50 CyfrifiadurCFR root[1983]: LID opened
Maw 09 11:03:50 CyfrifiadurCFR root[1987]: arg1 is button/lid, arg2 is LID, arg3 is open and arg4 is
Maw 09 11:03:50 CyfrifiadurCFR dhclient[1992]: Killed old client process
Maw 09 11:03:50 CyfrifiadurCFR root[1993]: ACPI group/action undefined: ibm/hotkey / LEN0268:00
Maw 09 11:03:50 CyfrifiadurCFR upowerd[1076]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-7
Maw 09 11:03:50 CyfrifiadurCFR systemd-sleep[1785]: System resumed.
Maw 09 11:03:50 CyfrifiadurCFR kernel: PM: suspend exit
Maw 09 11:03:50 CyfrifiadurCFR upowerd[1076]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-7
Maw 09 11:03:50 CyfrifiadurCFR root[1996]: arg1 is ibm/hotkey, arg2 is LEN0268:00, arg3 is 00000080 and arg4 is 00006032
Maw 09 11:03:50 CyfrifiadurCFR root[2002]: ACPI group/action undefined: ibm/hotkey / LEN0268:00
Maw 09 11:03:50 CyfrifiadurCFR systemd[1]: Stopped target Bluetooth.
Maw 09 11:03:50 CyfrifiadurCFR systemd[915]: Reached target Bluetooth.
Maw 09 11:03:50 CyfrifiadurCFR systemd[1]: Reached target Bluetooth.
Maw 09 11:03:50 CyfrifiadurCFR root[2004]: arg1 is ibm/hotkey, arg2 is LEN0268:00, arg3 is 00000080 and arg4 is 00006032
Maw 09 11:03:50 CyfrifiadurCFR systemd[1]: systemd-suspend.service: Succeeded.
Maw 09 11:03:50 CyfrifiadurCFR systemd[1]: Finished Suspend.
Maw 09 11:03:50 CyfrifiadurCFR systemd[1]: Stopped target Sleep.
Maw 09 11:03:50 CyfrifiadurCFR systemd[1]: Reached target Suspend.
Maw 09 11:03:50 CyfrifiadurCFR audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=>
Maw 09 11:03:50 CyfrifiadurCFR audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?>
Maw 09 11:03:50 CyfrifiadurCFR systemd[1]: Stopped target Suspend.
Maw 09 11:03:50 CyfrifiadurCFR systemd-logind[439]: Operation 'sleep' finished.
Maw 09 11:03:50 CyfrifiadurCFR kded5[1041]: bluedevil: About to resume
Maw 09 11:03:50 CyfrifiadurCFR kernel: audit: type=1130 audit(1615287830.240:90): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/system>
Maw 09 11:03:50 CyfrifiadurCFR kernel: audit: type=1131 audit(1615287830.240:91): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/system>
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: qt.svg: <input>:406:376: Could not add child element to parent element because the types are incorrect.
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: qt.svg: <input>:407:130: Could not add child element to parent element because the types are incorrect.
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: qt.svg: <input>:408:130: Could not add child element to parent element because the types are incorrect.
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: qt.svg: <input>:408:393: Could not add child element to parent element because the types are incorrect.
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: qt.svg: <input>:409:130: Could not add child element to parent element because the types are incorrect.
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: qt.svg: <input>:410:129: Could not add child element to parent element because the types are incorrect.
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: qt.svg: <input>:411:129: Could not add child element to parent element because the types are incorrect.
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: qt.svg: <input>:412:129: Could not add child element to parent element because the types are incorrect.
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: qt.svg: <input>:413:129: Could not add child element to parent element because the types are incorrect.
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: qt.svg: <input>:413:379: Could not add child element to parent element because the types are incorrect.
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: qt.svg: <input>:413:631: Could not add child element to parent element because the types are incorrect.
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: file:///usr/share/plasma/look-and-feel/org.kde.breeze.desktop/contents/components/VirtualKeyboard.qml:20:1: module "QtQuick.Virt>
Maw 09 11:03:50 CyfrifiadurCFR kscreenlocker_greet[1773]: file:///usr/lib/qt/qml/org/kde/plasma/workspace/components/KeyboardLayoutButton.qml:17: TypeError: Cannot read property 'longNam>
Maw 09 11:03:51 CyfrifiadurCFR kscreenlocker_greet[1773]: kf.coreaddons.desktopparser: Error: Could not find [Desktop Entry] group in  "/usr/share/sddm/themes/sddm-stellar-theme/metadata>
Maw 09 11:03:51 CyfrifiadurCFR kscreenlocker_greet[1773]: kf.coreaddons.desktopparser: Error: Could not find [Desktop Entry] group in  "/usr/share/sddm/themes/sddm-stellar-theme/metadata>
Maw 09 11:03:51 CyfrifiadurCFR kscreenlocker_greet[1773]: kf.coreaddons.desktopparser: Error: Could not find [Desktop Entry] group in  "/usr/share/sddm/themes/sddm-stellar-theme/metadata>
Maw 09 11:03:51 CyfrifiadurCFR avahi-daemon[424]: Withdrawing address record for 192.168.0.10 on wlan0.
Maw 09 11:03:51 CyfrifiadurCFR avahi-daemon[424]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 192.168.0.10.
Maw 09 11:03:51 CyfrifiadurCFR avahi-daemon[424]: Interface wlan0.IPv4 no longer relevant for mDNS.
Maw 09 11:03:51 CyfrifiadurCFR dhclient[1992]: DHCPREQUEST for 192.168.0.10 on wlan0 to 255.255.255.255 port 67
Maw 09 11:03:51 CyfrifiadurCFR kernel: Bluetooth: hci0: Waiting for firmware download to complete
Maw 09 11:03:51 CyfrifiadurCFR kernel: Bluetooth: hci0: Firmware loaded in 1485124 usecs
Maw 09 11:03:51 CyfrifiadurCFR kernel: Bluetooth: hci0: Waiting for device to boot
Maw 09 11:03:51 CyfrifiadurCFR kernel: Bluetooth: hci0: Device booted in 11812 usecs
Maw 09 11:03:51 CyfrifiadurCFR kernel: Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
Maw 09 11:03:51 CyfrifiadurCFR kernel: Bluetooth: hci0: Applying Intel DDC parameters completed
Maw 09 11:03:51 CyfrifiadurCFR kernel: Bluetooth: hci0: Reading supported features failed (-16)
Maw 09 11:03:51 CyfrifiadurCFR kernel: Bluetooth: hci0: Telemetry exception format not supported
Maw 09 11:03:51 CyfrifiadurCFR kernel: Bluetooth: hci0: Firmware revision 0.1 build 50 week 12 2019
Maw 09 11:03:53 CyfrifiadurCFR kernel: wlan0: authenticate with 18:35:d1:c8:ec:09
Maw 09 11:03:53 CyfrifiadurCFR kernel: wlan0: send auth to 18:35:d1:c8:ec:09 (try 1/3)
Maw 09 11:03:53 CyfrifiadurCFR kernel: wlan0: send auth to 18:35:d1:c8:ec:09 (try 2/3)
Maw 09 11:03:53 CyfrifiadurCFR kernel: wlan0: send auth to 18:35:d1:c8:ec:09 (try 3/3)
Maw 09 11:03:53 CyfrifiadurCFR kernel: wlan0: authenticated
Maw 09 11:03:53 CyfrifiadurCFR kernel: wlan0: associate with 18:35:d1:c8:ec:09 (try 1/3)
Maw 09 11:03:53 CyfrifiadurCFR kernel: wlan0: RX AssocResp from 18:35:d1:c8:ec:09 (capab=0x1431 status=0 aid=1)
Maw 09 11:03:53 CyfrifiadurCFR kernel: wlan0: associated
Maw 09 11:03:53 CyfrifiadurCFR kernel: wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 18:35:d1:c8:ec:09
Maw 09 11:03:53 CyfrifiadurCFR dhclient[2142]: DHCPREQUEST for 192.168.0.10 on wlan0 to 255.255.255.255 port 67
Maw 09 11:03:53 CyfrifiadurCFR dhclient[2142]: DHCPACK of 192.168.0.10 from 192.168.0.1
Maw 09 11:03:53 CyfrifiadurCFR avahi-daemon[424]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.0.10.
Maw 09 11:03:53 CyfrifiadurCFR avahi-daemon[424]: New relevant interface wlan0.IPv4 for mDNS.
Maw 09 11:03:53 CyfrifiadurCFR avahi-daemon[424]: Registering new address record for 192.168.0.10 on wlan0.IPv4.
Maw 09 11:03:53 CyfrifiadurCFR dhclient[2142]: bound to 192.168.0.10 -- renewal in 37036 seconds.
Maw 09 11:03:57 CyfrifiadurCFR kernel: IN=wlan0 OUT= MAC=ff:ff:ff:ff:ff:ff:68:27:37:0c:fe:dc:08:00 SRC=192.168.0.11 DST=192.168.0.255 LEN=63 TOS=0x00 PREC=0x00 TTL=64 ID=38955 DF PROTO=U>
Maw 09 11:03:59 CyfrifiadurCFR audit[2157]: USER_AUTH pid=2157 uid=1000 auid=1000 ses=2 msg='op=PAM:unix_chkpwd acct="myusername" exe="/usr/bin/unix_chkpwd" hostname=? addr=? terminal=? res=>
Maw 09 11:03:59 CyfrifiadurCFR kernel: audit: type=1100 audit(1615287839.480:92): pid=2157 uid=1000 auid=1000 ses=2 msg='op=PAM:unix_chkpwd acct="myusername" exe="/usr/bin/unix_chkpwd" hostn
Maw 09 11:03:59 CyfrifiadurCFR kwin_x11[1045]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 8844, resource id: 4194362, major code: 18 (ChangeProperty), minor code: 0
Maw 09 11:04:01 CyfrifiadurCFR clamd[427]: Tue Mar  9 11:04:01 2021 -> SelfCheck: Database status OK.
Maw 09 11:04:08 CyfrifiadurCFR kernel: IN=wlan0 OUT= MAC= SRC=192.168.0.10 DST=255.255.255.255 LEN=140 TOS=0x00 PREC=0x00 TTL=64 ID=63516 DF PROTO=UDP SPT=21327 DPT=21327 LEN=120 
Maw 09 11:04:19 CyfrifiadurCFR chronyd[431]: Selected source 162.159.200.123
Maw 09 11:04:19 CyfrifiadurCFR chronyd[431]: Source 81.21.76.27 replaced with 51.68.199.219
Maw 09 11:04:21 CyfrifiadurCFR kernel: IN=wlan0 OUT= MAC=ff:ff:ff:ff:ff:ff:68:27:37:0c:fe:dc:08:00 SRC=192.168.0.11 DST=192.168.0.255 LEN=63 TOS=0x00 PREC=0x00 TTL=64 ID=41564 DF PROTO=U>
Maw 09 11:04:33 CyfrifiadurCFR kernel: IN=wlan0 OUT= MAC=ff:ff:ff:ff:ff:ff:68:27:37:0c:fe:dc:08:00 SRC=192.168.0.11 DST=192.168.0.255 LEN=63 TOS=0x00 PREC=0x00 TTL=64 ID=42720 DF PROTO=U>
Maw 09 11:04:45 CyfrifiadurCFR kernel: IN=wlan0 OUT= MAC=ff:ff:ff:ff:ff:ff:68:27:37:0c:fe:dc:08:00 SRC=192.168.0.11 DST=192.168.0.255 LEN=63 TOS=0x00 PREC=0x00 TTL=64 ID=43898 DF PROTO=U>
Maw 09 11:04:56 CyfrifiadurCFR audit[2166]: USER_AUTH pid=2166 uid=1000 auid=1000 ses=2 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="myusername" exe="/usr/b>
Maw 09 11:04:56 CyfrifiadurCFR dbus-daemon[428]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.64' (uid>
Maw 09 11:04:56 CyfrifiadurCFR dbus-daemon[428]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Maw 09 11:04:56 CyfrifiadurCFR sudo[2166]: pam_systemd_home(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.

The ThinkWiki doesn't list my model (or any newer model) and I'm not sure to what extent anything there might or might not apply.

Any suggestions for troubleshooting this would be greatly appreciated.

===

I didn't find this before but somehow now managed to find https://bbs.archlinux.org/viewtopic.php … 27#p224727 from ages ago (which I even posted in). There, the issue is described as following sleep and reboot, too. Unfortunately, there's no clear solution and I'm not sure I have the same problem as the temperatures looked fine. (Though it is possible I missed something.)

If I could get thermald to run, I could try the suggestions at https://bbs.archlinux.org/viewtopic.php … 83#p184483, but I'm not sure how to (safely) do that or if it's a reasonable solution.

Last edited by cfr (2021-03-31 03:37:20)


How To Ask Questions The Smart Way | Help Vampires

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Corporation Wireless 8265 / 8275 | US keyboard with Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#2 2021-03-10 17:31:24

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 6,124

Re: [Solved] Fan runs madly on cool X270 after sleep following updates

I think I was mistaken before and it was not only possible I missed something. I pretty certainly did miss something and the issue I'm seeing is the misreported temperature. Some reports concern a temperature reading "stuck" at 48 and guess what?

iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:        +36.0°C  

pch_skylake-virtual-0
Adapter: Virtual device
temp1:        +22.5°C  

BAT1-acpi-0
Adapter: ACPI interface
in0:          12.32 V  

nvme-pci-0400
Adapter: PCI adapter
Composite:    +15.8°C  (low  = -273.1°C, high = +69.8°C)
                       (crit = +79.8°C)

thinkpad-isa-0000
Adapter: ISA adapter
fan1:        6185 RPM
temp1:            N/A  
temp2:            N/A  
temp3:         +0.0°C  
temp4:         +0.0°C  
temp5:         +0.0°C  
temp6:         +0.0°C  
temp7:         +0.0°C  
temp8:         +0.0°C  
temp9:         +0.0°C  
temp10:        +0.0°C  
temp11:        +0.0°C  
temp12:        +0.0°C  
temp13:        +0.0°C  
temp14:        +0.0°C  
temp15:        +0.0°C  
temp16:        +0.0°C  

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +27.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +24.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +23.0°C  (high = +100.0°C, crit = +100.0°C)

BAT0-acpi-0
Adapter: ACPI interface
in0:          12.22 V  

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +48.0°C  (crit = +128.0°C)

So how can I persuade the machine that `acpitz-acpi-0` is not 48 degrees?

Why is thinkpad-isa-0000 temp1 now 'N/A'?

I thought the temperature sensors were read courtesy of thinkpad_acpi, but now I'm wondering if that's right. What is the relationship between acpitz-acpi-0's temp1 and thinkpad-asa-0000's temp1? Is the former defaulting somehow to 48 because the latter is not being read for some reason?

Last edited by cfr (2021-03-10 18:16:28)


How To Ask Questions The Smart Way | Help Vampires

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Corporation Wireless 8265 / 8275 | US keyboard with Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#3 2021-03-11 01:56:30

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 6,124

Re: [Solved] Fan runs madly on cool X270 after sleep following updates

So I found https://bugzilla.kernel.org/show_bug.cgi?id=196129 (which was linked to one of the bugs I mentioned above). That bug was supposed to be fixed a while ago. I also found https://bugzilla.kernel.org/show_bug.cgi?id=210457 which is from February 2020 and filed as a new bug. That's opened and seems to have no activity, but it looks very much like a regression. However, if that were the cause, I don't see why I would see the bug only now. I don't seem to be getting the bug with the LTS kernel (unless it is sporadic - only just switched).

Bug 196129 suggests that booting with

acpi.ec_freeze_events=Y acpi.ec_suspend_yield=Y

added to the kernel command line ought to workaround (or hide?) the issue. However, when I tried using these options, I didn't get any further than the screen displaying the command. Boot simply stopped and I had to force a shut down.

Does anybody know if these options should still work? If so, what might I be doing wrong? If not, are there equivalents available?


How To Ask Questions The Smart Way | Help Vampires

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Corporation Wireless 8265 / 8275 | US keyboard with Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#4 2021-03-11 05:44:18

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 6,124

Re: [Solved] Fan runs madly on cool X270 after sleep following updates

https://bugzilla.kernel.org/show_bug.cgi?id=211313

The suggestion there is firmware but that's not an option right now. I don't have access to either a Windows machine or a USB optical drive at home and work is off-limits due to COVID restrictions.


How To Ask Questions The Smart Way | Help Vampires

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Corporation Wireless 8265 / 8275 | US keyboard with Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#5 2021-03-11 15:51:50

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 17,694

Re: [Solved] Fan runs madly on cool X270 after sleep following updates

The reasoning in this thread looks rational, but we should rule one other thing out.  I did not see where we may have checked for runaway processes. If I missed it , I apologize -- I scanned the thread quickly.

If a process were to run away, the CPU junction temperature could conceivably rise uncontrollably until it reached the thermal design limit, at which point the processor will take measures to protect itself by active cooling (full fans) and passive cooling (throttling).  That limit could well be the ceiling you encountered (as opposed  to a faulty temperature  reading).   When the system is in hoover craft mode, does htop show anything untoward?


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#6 2021-03-19 11:46:53

992jo
Member
Registered: 2021-03-19
Posts: 2

Re: [Solved] Fan runs madly on cool X270 after sleep following updates

I have the same issue with my x260. on kernel 5.11.7 the fan gets to ~6500 rpm after waking up from standby.
I switches to 5.10.24 (linux-lts) and so far I couldn't reproduce the problem on that version.
The BIOS firmware is up-to-date.
I can't report on older kernel versions, I got the x260 a couple of weeks ago.

Offline

#7 2021-03-29 03:15:31

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 6,124

Re: [Solved] Fan runs madly on cool X270 after sleep following updates

ewaller wrote:

The reasoning in this thread looks rational, but we should rule one other thing out.  I did not see where we may have checked for runaway processes. If I missed it , I apologize -- I scanned the thread quickly.

If a process were to run away, the CPU junction temperature could conceivably rise uncontrollably until it reached the thermal design limit, at which point the processor will take measures to protect itself by active cooling (full fans) and passive cooling (throttling).  That limit could well be the ceiling you encountered (as opposed  to a faulty temperature  reading).   When the system is in hoover craft mode, does htop show anything untoward?

Thanks. I cannot now test as a firmware update resolved the issue for me. (I discovered fwmgr and LVFS somewhat belatedly after about 10 days grappling with the thing.)

That said, I'm 99.9999% certain no runaway process was involved. The other thermal sensors all had low readings. The highest was the ACPI one which was stuck at 48. That's above the trigger point for the fan, but only by 3 degrees. It wouldn't usually trigger 6,000+ RPM and it never fell. Moreover, the air blown out by the fan was on the freezing side of a bit nippy. If something was getting hot, that heat sure wasn't getting blown out.

What I'm not certain of now is whether I should mark this as solved or not. That's what I intended to do, but I see somebody else has the same issue despite current BIOS. So should I leave it open?

Last edited by cfr (2021-03-31 03:43:35)


How To Ask Questions The Smart Way | Help Vampires

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Corporation Wireless 8265 / 8275 | US keyboard with Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#8 2021-03-29 03:23:47

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 6,124

Re: [Solved] Fan runs madly on cool X270 after sleep following updates

992jo wrote:

I have the same issue with my x260. on kernel 5.11.7 the fan gets to ~6500 rpm after waking up from standby.
I switches to 5.10.24 (linux-lts) and so far I couldn't reproduce the problem on that version.
The BIOS firmware is up-to-date.
I can't report on older kernel versions, I got the x260 a couple of weeks ago.

Have you checked for other firmware updates with fwupdmgr? I had no idea this existed so had never tried it, but it installed 3 updates on my machine - so more than just the BIOS. (It didn't bring the BIOS to Lenovo's current one, but a less outdated one.) Aside from the BIOS, I got an Embedded Controller update and a Consumer ME update. Since they all got updated together, I don't know which resolved the problem.


How To Ask Questions The Smart Way | Help Vampires

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Corporation Wireless 8265 / 8275 | US keyboard with Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#9 2021-03-30 11:44:52

992jo
Member
Registered: 2021-03-19
Posts: 2

Re: [Solved] Fan runs madly on cool X270 after sleep following updates

I tried the fwupdmgr already, but there are either no releases available for the devices or the devices are already running with the newest version.
Also I hit the high-fan-speed bug today on 5.10.24 LTS.

Offline

#10 2021-03-31 03:36:13

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 6,124

Re: [Solved] Fan runs madly on cool X270 after sleep following updates

992jo wrote:

I tried the fwupdmgr already, but there are either no releases available for the devices or the devices are already running with the newest version.
Also I hit the high-fan-speed bug today on 5.10.24 LTS.

I think you should start a new thread and link to this one. That way, the information about your case won't get confused with mine. Post similar information to the stuff I posted and also the htop output ewaller wanted.

If it looks as if a similar thermal sensor is involved (and probably even if it doesn't), you should consider commenting on the upstream kernel bugs, making clear that your firmware is current.

I'm going to mark this as solved because it looks as if your problem is different from mine (as firmware isn't implicated or, if it is, no fix is available).


How To Ask Questions The Smart Way | Help Vampires

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Corporation Wireless 8265 / 8275 | US keyboard with Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

Board footer

Powered by FluxBB