You are not logged in.
Hi all, i've been trying to get my TPLINK T2U Archer to work on my arch installation and i can't get it to work,
Here is the output of nmcli monitor
wlp0s20f0u9u4: using connection 'stefan'
wlp0s20f0u9u4: connecting (prepare)
wlp0s20f0u9u4: connecting (configuring)
wlp0s20f0u9u4: connecting (need authentication)
wlp0s20f0u9u4: connecting (prepare)
wlp0s20f0u9u4: connecting (configuring)
stefan: connection profile changed
wlp0s20f0u9u4: connecting (getting IP configuration)
wlp0s20f0u9u4: connection failed
wlp0s20f0u9u4: disconnected
I noticed similar behaviour with other network managers, Any ideas?
Last edited by StefanFi (2021-06-18 12:49:47)
Offline
Please post the system journal
sudo journalctl -b
Offline
Here's journalctl, looking up Realtek will get you to the USB initialization
Offline
Have tried not using the aircrack module?
What's the output of "lsusb" (w/ the wifi attached)?
Offline
Here's lsusb
Bus 001 Device 023: ID 2357:011e TP-Link AC600 wireless Realtek RTL8811AU [Archer T2U Nano]
and here's usb-devices
T: Bus=01 Lev=02 Prnt=08 Port=03 Cnt=02 Dev#= 23 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2357 ProdID=011e Rev=02.00
S: Manufacturer=Realtek
S: Product=802.11ac WLAN Adapter
S: SerialNumber=00e04c000001
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl88XXau
Offline
Offline
I can't thank you enough, every time i installed arch i had trouble and now it works flawlessly
I'm gonna engrave that link on the usb card now heh
Offline