You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2021-06-28 19:57:02
- sudobyter
- Member
- Registered: 2021-06-28
- Posts: 7
Xorg not working
Hi there,
am n00b in arch linux. I've been using it for year almost but I didn't face something like this before it's not my first build
I can't start any DE related to Xorg [KDE X11 , I3WM , GNOME CLASSIC , GNOME XORG] I tried to reinstall it, but remains the same. In addition am using NVIDIA GPU and it's not working
when I run the command
nvidia-smithe output clears out that is my GPU is not working at all
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 465.31 Driver Version: 465.31 CUDA Version: 11.3 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|===============================+======================+======================|
| 0 NVIDIA GeForce ... Off | 00000000:01:00.0 Off | N/A |
| N/A 47C P0 24W / N/A | 0MiB / 6078MiB | 0% Default |
| | | N/A |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=============================================================================|
| No running processes found |
+-----------------------------------------------------------------------------+I tried optimus-manager and nvidia-prime to control it but non of them worked
When I do startx from the tty1
it says
xinit : giving up
xinit : unable to connect to X server : connection refused
xinit : server error I'll paste the log of Xorg.0.log it might be helpful
[ 3194.545] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 3194.546]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 3194.550] Build Operating System: Linux Archlinux
[ 3194.551] Current Operating System: Linux archlinux 5.10.46-1-lts #1 SMP Wed, 23 Jun 2021 16:18:42 +0000 x86_64
[ 3194.551] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=b7650301-3f4c-40cf-919e-8984dfce7ac7 rw loglevel=3 quiet
[ 3194.554] Build Date: 13 April 2021 03:12:10PM
[ 3194.555]
[ 3194.557] Current version of pixman: 0.40.0
[ 3194.559] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3194.559] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3194.565] (==) Log file: "/home/matt/.local/share/xorg/Xorg.0.log", Time: Mon Jun 28 22:08:47 2021
[ 3194.567] (==) Using config file: "/etc/X11/xorg.conf"
[ 3194.568] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3194.569] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3194.569] (==) ServerLayout "Layout0"
[ 3194.569] (**) |-->Screen "Screen0" (0)
[ 3194.569] (**) | |-->Monitor "Monitor0"
[ 3194.569] (**) | |-->Device "Device0"
[ 3194.569] (**) | |-->GPUDevice "Device0"
[ 3194.569] (**) |-->Input Device "Keyboard0"
[ 3194.569] (**) |-->Input Device "Mouse0"
[ 3194.569] (==) Automatically adding devices
[ 3194.569] (==) Automatically enabling devices
[ 3194.569] (==) Automatically adding GPU devices
[ 3194.569] (==) Automatically binding GPU devices
[ 3194.569] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3194.569] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 3194.569] Entry deleted from font path.
[ 3194.569] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 3194.569] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3194.569] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 3194.569] (WW) Disabling Keyboard0
[ 3194.569] (WW) Disabling Mouse0
[ 3194.569] (II) Module ABI versions:
[ 3194.569] X.Org ANSI C Emulation: 0.4
[ 3194.569] X.Org Video Driver: 24.1
[ 3194.569] X.Org XInput driver : 24.1
[ 3194.569] X.Org Server Extension : 10.0
[ 3194.570] (++) using VT number 1
[ 3194.571] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 3194.572] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3194.572] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 3194.573] (--) PCI:*(0@0:2:0) 8086:3e9b:1462:1223 rev 0, Mem @ 0xa2000000/16777216, 0x80000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 3194.573] (--) PCI: (1@0:0:0) 10de:1c20:1462:1223 rev 161, Mem @ 0xa3000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 3194.573] (II) Open ACPI successful (/var/run/acpid.socket)
[ 3194.573] (II) LoadModule: "glx"
[ 3194.574] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3194.575] (II) Module glx: vendor="X.Org Foundation"
[ 3194.575] compiled for 1.20.11, module version = 1.0.0
[ 3194.575] ABI class: X.Org Server Extension, version 10.0
[ 3194.575] (II) LoadModule: "nvidia"
[ 3194.575] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 3194.575] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 3194.575] compiled for 1.6.99.901, module version = 1.0.0
[ 3194.575] Module class: X.Org Video Driver
[ 3194.575] (II) NVIDIA dlloader X Driver 465.31 Thu May 13 22:19:15 UTC 2021
[ 3194.575] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 3194.575] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 3194.575] (EE) No devices detected.
[ 3194.575] (EE)
Fatal server error:
[ 3194.575] (EE) no screens found(EE)
[ 3194.575] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 3194.575] (EE) Please also check the log file at "/home/matt/.local/share/xorg/Xorg.0.log" for additional information.
[ 3194.575] (EE)
[ 3194.599] (EE) Server terminated with error (1). Closing log file. I added to .xinitrc
exec i3 to run i3 but it didn't work
lets go to /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 465.31
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSectiongoing to /etc/X11/xorg.conf.d
I have 4 config files
20-intel.conf
10-nvidia-drm-classoutput.conf
90-touchpad.conf
00-keyboard.conf
I'll post them in order
20-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
EndSection10-nvidia-drm-outputclass.conf
Section "OutputClass"
Identifier "intel"
MatchDriver "i915"
Driver "modesetting"
EndSection
Section "OutputClass"
Identifier "nvidia"
MatchDriver "nvidia-drm"
Driver "nvidia"
Option "AllowEmptyInitialConfiguration"
Option "PrimaryGPU" "yes"
ModulePath "/usr/lib/nvidia/xorg"
ModulePath "/usr/lib/xorg/modules"
EndSectionfor the following two I don't think they are related but I'll paste them just in case
90-touchpad.conf
Section "InputClass"
Identifier "touchpad"
MatchIsTouchpad "on"
Driver "libinput"
Option "Tapping" "on"
Option "TappingButtonMap" "lrm"
Option "NatruralScrolling" "on"
Option "ScrollMethod" "twofinger"
Option "ScrollMethod" "edge"
EndSection00-keyboard.conf
# Written by systemd-localed(8), read by systemd-localed and Xorg. It's
# probably wise not to edit this file manually. Use localectl(1) to
# instruct systemd-localed to update it.
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "us,ara"
Option "XkbVariant" ","
EndSectionI don't what am doing wrong my lack of knowledge is not helping me for solving the problem , please help me out
and if the conf am posting are irrelevant please tell me and I'll update you
Thank you !
Offline
#2 2021-06-28 20:28:56
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,527
Re: Xorg not working
lets go to /etc/X11/xorg.conf
lets go remove that file… nvidia-settings generated xorg configs are generally not compatible w/ optimus systems.
Post the output of lspci, an updated Xorg log after removing that file and read up https://wiki.archlinux.org/title/NVIDIA_Optimus
Offline
#3 2021-06-28 22:21:35
- sudobyter
- Member
- Registered: 2021-06-28
- Posts: 7
Re: Xorg not working
OH WOOW !
I removed the file and I3WM starts thank you so much !
Here is the Xorg.0.log
[ 14152.431] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 14152.432]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 14152.434] Build Operating System: Linux Archlinux
[ 14152.435] Current Operating System: Linux archlinux 5.10.46-1-lts #1 SMP Wed, 23 Jun 2021 16:18:42 +0000 x86_64
[ 14152.435] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=b7650301-3f4c-40cf-919e-8984dfce7ac7 rw loglevel=3 quiet
[ 14152.436] Build Date: 13 April 2021 03:12:10PM
[ 14152.437]
[ 14152.438] Current version of pixman: 0.40.0
[ 14152.440] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14152.440] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14152.444] (==) Log file: "/home/matt/.local/share/xorg/Xorg.0.log", Time: Tue Jun 29 01:11:25 2021
[ 14152.445] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 14152.446] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 14152.446] (==) No Layout section. Using the first Screen section.
[ 14152.446] (==) No screen section available. Using defaults.
[ 14152.446] (**) |-->Screen "Default Screen Section" (0)
[ 14152.446] (**) | |-->Monitor "<default monitor>"
[ 14152.446] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 14152.446] (**) | |-->Device "Intel Graphics"
[ 14152.446] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 14152.446] (==) Automatically adding devices
[ 14152.446] (==) Automatically enabling devices
[ 14152.446] (==) Automatically adding GPU devices
[ 14152.446] (==) Automatically binding GPU devices
[ 14152.446] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 14152.446] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 14152.446] Entry deleted from font path.
[ 14152.446] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 14152.446] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 14152.446] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14152.446] (II) Module ABI versions:
[ 14152.446] X.Org ANSI C Emulation: 0.4
[ 14152.446] X.Org Video Driver: 24.1
[ 14152.446] X.Org XInput driver : 24.1
[ 14152.446] X.Org Server Extension : 10.0
[ 14152.447] (++) using VT number 1
[ 14152.448] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 14152.448] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 14152.449] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 14152.450] (--) PCI:*(0@0:2:0) 8086:3e9b:1462:1223 rev 0, Mem @ 0xa2000000/16777216, 0x80000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 14152.450] (--) PCI: (1@0:0:0) 10de:1c20:1462:1223 rev 161, Mem @ 0xa3000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 14152.450] (II) Open ACPI successful (/var/run/acpid.socket)
[ 14152.450] (II) LoadModule: "glx"
[ 14152.450] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14152.451] (II) Module glx: vendor="X.Org Foundation"
[ 14152.451] compiled for 1.20.11, module version = 1.0.0
[ 14152.451] ABI class: X.Org Server Extension, version 10.0
[ 14152.451] (II) LoadModule: "intel"
[ 14152.451] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 14152.454] (II) Module intel: vendor="X.Org Foundation"
[ 14152.454] compiled for 1.20.10, module version = 2.99.917
[ 14152.454] Module class: X.Org Video Driver
[ 14152.454] ABI class: X.Org Video Driver, version 24.1
[ 14152.454] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 14152.454] (II) intel: Driver for Intel(R) HD Graphics
[ 14152.454] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 14152.454] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 14152.454] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 14152.454] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20200917
[ 14152.454] (II) intel(0): SNA compiled from 2.99.917-916-g31486f40
[ 14152.480] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 14152.480] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 14152.480] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 6 threads
[ 14152.480] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 14152.480] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 14152.480] (==) intel(0): RGB weight 888
[ 14152.480] (==) intel(0): Default visual is TrueColor
[ 14152.481] (II) intel(0): Output eDP1 has no monitor section
[ 14152.481] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 14152.481] (II) intel(0): Enabled output eDP1
[ 14152.481] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 14152.482] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 14152.482] (II) intel(0): Enabled output VIRTUAL1
[ 14152.482] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 14152.482] (==) intel(0): TearFree enabled
[ 14152.482] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14152.482] (==) intel(0): DPI set to (96, 96)
[ 14152.482] (II) Loading sub module "dri3"
[ 14152.482] (II) LoadModule: "dri3"
[ 14152.482] (II) Module "dri3" already built-in
[ 14152.482] (II) Loading sub module "dri2"
[ 14152.482] (II) LoadModule: "dri2"
[ 14152.482] (II) Module "dri2" already built-in
[ 14152.482] (II) Loading sub module "present"
[ 14152.482] (II) LoadModule: "present"
[ 14152.482] (II) Module "present" already built-in
[ 14152.484] (II) intel(0): SNA initialized with Coffeelake (gen9) backend
[ 14152.484] (==) intel(0): Backing store enabled
[ 14152.484] (==) intel(0): Silken mouse disabled
[ 14152.484] (II) intel(0): HW Cursor enabled
[ 14152.484] (==) intel(0): DPMS enabled
[ 14152.484] (==) intel(0): Display hotplug detection enabled
[ 14152.484] (II) intel(0): [DRI2] Setup complete
[ 14152.484] (II) intel(0): [DRI2] DRI driver: i965
[ 14152.484] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 14152.484] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 14152.484] (II) intel(0): hardware support for Present enabled
[ 14152.485] (II) Initializing extension Generic Event Extension
[ 14152.485] (II) Initializing extension SHAPE
[ 14152.485] (II) Initializing extension MIT-SHM
[ 14152.485] (II) Initializing extension XInputExtension
[ 14152.485] (II) Initializing extension XTEST
[ 14152.485] (II) Initializing extension BIG-REQUESTS
[ 14152.485] (II) Initializing extension SYNC
[ 14152.485] (II) Initializing extension XKEYBOARD
[ 14152.485] (II) Initializing extension XC-MISC
[ 14152.485] (II) Initializing extension SECURITY
[ 14152.485] (II) Initializing extension XFIXES
[ 14152.485] (II) Initializing extension RENDER
[ 14152.485] (II) Initializing extension RANDR
[ 14152.485] (II) Initializing extension COMPOSITE
[ 14152.485] (II) Initializing extension DAMAGE
[ 14152.485] (II) Initializing extension MIT-SCREEN-SAVER
[ 14152.485] (II) Initializing extension DOUBLE-BUFFER
[ 14152.485] (II) Initializing extension RECORD
[ 14152.485] (II) Initializing extension DPMS
[ 14152.485] (II) Initializing extension Present
[ 14152.485] (II) Initializing extension DRI3
[ 14152.485] (II) Initializing extension X-Resource
[ 14152.485] (II) Initializing extension XVideo
[ 14152.485] (II) Initializing extension XVideo-MotionCompensation
[ 14152.485] (II) Initializing extension GLX
[ 14152.520] (II) AIGLX: Loaded and initialized i965
[ 14152.520] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14152.520] (II) Initializing extension XFree86-VidModeExtension
[ 14152.520] (II) Initializing extension XFree86-DGA
[ 14152.520] (II) Initializing extension XFree86-DRI
[ 14152.520] (II) Initializing extension DRI2
[ 14152.525] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 14152.528] (II) intel(0): Setting screen physical size to 508 x 285
[ 14152.600] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14152.600] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 14152.600] (**) Power Button: Applying InputClass "system-keyboard"
[ 14152.600] (II) LoadModule: "libinput"
[ 14152.600] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 14152.603] (II) Module libinput: vendor="X.Org Foundation"
[ 14152.603] compiled for 1.20.11, module version = 1.1.0
[ 14152.603] Module class: X.Org XInput Driver
[ 14152.603] ABI class: X.Org XInput driver, version 24.1
[ 14152.603] (II) Using input driver 'libinput' for 'Power Button'
[ 14152.603] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 18 paused 0
[ 14152.603] (**) Power Button: always reports core events
[ 14152.603] (**) Option "Device" "/dev/input/event3"
[ 14152.603] (**) Option "_source" "server/udev"
[ 14152.609] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 14152.609] (II) event3 - Power Button: device is a keyboard
[ 14152.609] (II) event3 - Power Button: device removed
[ 14152.609] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 14152.609] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14152.609] (**) Option "xkb_layout" "us,ara"
[ 14152.609] (**) Option "xkb_variant" ","
[ 14152.624] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 14152.624] (II) event3 - Power Button: device is a keyboard
[ 14152.624] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 14152.624] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 14152.624] (**) Video Bus: Applying InputClass "system-keyboard"
[ 14152.624] (II) Using input driver 'libinput' for 'Video Bus'
[ 14152.625] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 21 paused 0
[ 14152.625] (**) Video Bus: always reports core events
[ 14152.625] (**) Option "Device" "/dev/input/event6"
[ 14152.625] (**) Option "_source" "server/udev"
[ 14152.625] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 14152.625] (II) event6 - Video Bus: device is a keyboard
[ 14152.625] (II) event6 - Video Bus: device removed
[ 14152.625] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event6"
[ 14152.625] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 14152.625] (**) Option "xkb_layout" "us,ara"
[ 14152.625] (**) Option "xkb_variant" ","
[ 14152.626] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 14152.626] (II) event6 - Video Bus: device is a keyboard
[ 14152.626] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 14152.626] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 14152.626] (**) Video Bus: Applying InputClass "system-keyboard"
[ 14152.626] (II) Using input driver 'libinput' for 'Video Bus'
[ 14152.627] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 22 paused 0
[ 14152.627] (**) Video Bus: always reports core events
[ 14152.627] (**) Option "Device" "/dev/input/event7"
[ 14152.627] (**) Option "_source" "server/udev"
[ 14152.627] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 14152.627] (II) event7 - Video Bus: device is a keyboard
[ 14152.627] (II) event7 - Video Bus: device removed
[ 14152.627] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input9/event7"
[ 14152.627] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 14152.627] (**) Option "xkb_layout" "us,ara"
[ 14152.627] (**) Option "xkb_variant" ","
[ 14152.628] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 14152.628] (II) event7 - Video Bus: device is a keyboard
[ 14152.629] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 14152.629] (II) No input driver specified, ignoring this device.
[ 14152.629] (II) This device may have been added with another device file.
[ 14152.629] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 14152.629] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 14152.629] (**) Power Button: Applying InputClass "system-keyboard"
[ 14152.629] (II) Using input driver 'libinput' for 'Power Button'
[ 14152.629] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 23 paused 0
[ 14152.629] (**) Power Button: always reports core events
[ 14152.629] (**) Option "Device" "/dev/input/event2"
[ 14152.629] (**) Option "_source" "server/udev"
[ 14152.630] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 14152.630] (II) event2 - Power Button: device is a keyboard
[ 14152.630] (II) event2 - Power Button: device removed
[ 14152.630] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 14152.630] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 14152.630] (**) Option "xkb_layout" "us,ara"
[ 14152.630] (**) Option "xkb_variant" ","
[ 14152.630] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 14152.631] (II) event2 - Power Button: device is a keyboard
[ 14152.631] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 14152.631] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 14152.631] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 14152.631] (II) Using input driver 'libinput' for 'Sleep Button'
[ 14152.631] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 24 paused 0
[ 14152.631] (**) Sleep Button: always reports core events
[ 14152.631] (**) Option "Device" "/dev/input/event1"
[ 14152.631] (**) Option "_source" "server/udev"
[ 14152.632] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 14152.632] (II) event1 - Sleep Button: device is a keyboard
[ 14152.632] (II) event1 - Sleep Button: device removed
[ 14152.632] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 14152.632] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 14152.632] (**) Option "xkb_layout" "us,ara"
[ 14152.632] (**) Option "xkb_variant" ","
[ 14152.632] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 14152.632] (II) event1 - Sleep Button: device is a keyboard
[ 14152.633] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[ 14152.633] (II) No input driver specified, ignoring this device.
[ 14152.633] (II) This device may have been added with another device file.
[ 14152.633] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[ 14152.633] (II) No input driver specified, ignoring this device.
[ 14152.633] (II) This device may have been added with another device file.
[ 14152.633] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[ 14152.633] (II) No input driver specified, ignoring this device.
[ 14152.633] (II) This device may have been added with another device file.
[ 14152.634] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 14152.634] (II) No input driver specified, ignoring this device.
[ 14152.634] (II) This device may have been added with another device file.
[ 14152.634] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event12)
[ 14152.634] (II) No input driver specified, ignoring this device.
[ 14152.634] (II) This device may have been added with another device file.
[ 14152.634] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[ 14152.634] (II) No input driver specified, ignoring this device.
[ 14152.634] (II) This device may have been added with another device file.
[ 14152.634] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[ 14152.634] (II) No input driver specified, ignoring this device.
[ 14152.634] (II) This device may have been added with another device file.
[ 14152.635] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 14152.635] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 14152.635] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 14152.635] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 14152.635] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 25 paused 0
[ 14152.635] (**) AT Translated Set 2 keyboard: always reports core events
[ 14152.635] (**) Option "Device" "/dev/input/event4"
[ 14152.635] (**) Option "_source" "server/udev"
[ 14152.636] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 14152.636] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 14152.636] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 14152.636] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 14152.636] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 14152.636] (**) Option "xkb_layout" "us,ara"
[ 14152.636] (**) Option "xkb_variant" ","
[ 14152.637] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 14152.637] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 14152.637] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
[ 14152.637] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 14152.637] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[ 14152.637] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 14152.638] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 26 paused 0
[ 14152.638] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14152.638] (**) Option "Device" "/dev/input/event16"
[ 14152.638] (**) Option "_source" "server/udev"
[ 14152.638] (II) event16 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 14152.639] (II) event16 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 14152.639] (II) event16 - SynPS/2 Synaptics TouchPad: device removed
[ 14152.639] (**) Option "Tapping" "on"
[ 14152.639] (**) Option "TappingButtonMap" "lrm"
[ 14152.639] (**) Option "ScrollMethod" "twofinger"
[ 14152.639] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event16"
[ 14152.639] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 14152.640] (**) Option "AccelerationScheme" "none"
[ 14152.640] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 14152.640] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 14152.640] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 14152.640] (II) event16 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 14152.641] (II) event16 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 14152.641] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 14152.641] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[ 14152.641] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 14152.641] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14152.641] (**) Option "Device" "/dev/input/mouse0"
[ 14152.641] (**) Option "_source" "server/udev"
[ 14152.641] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse0
Permission denied.
[ 14152.641] (II) mouse0: opening input device '/dev/input/mouse0' failed (Permission denied).
[ 14152.641] (II) mouse0 - failed to create input device '/dev/input/mouse0'.
[ 14152.641] (EE) libinput: SynPS/2 Synaptics TouchPad: Failed to create a device for /dev/input/mouse0
[ 14152.641] (EE) PreInit returned 2 for "SynPS/2 Synaptics TouchPad"
[ 14152.641] (II) UnloadModule: "libinput"
[ 14152.642] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 14152.642] (II) No input driver specified, ignoring this device.
[ 14152.642] (II) This device may have been added with another device file.
[ 14152.643] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event15)
[ 14152.643] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 14152.643] (**) MSI WMI hotkeys: Applying InputClass "system-keyboard"
[ 14152.643] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[ 14152.644] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 27 paused 0
[ 14152.644] (**) MSI WMI hotkeys: always reports core events
[ 14152.644] (**) Option "Device" "/dev/input/event15"
[ 14152.644] (**) Option "_source" "server/udev"
[ 14152.644] (II) event15 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 14152.644] (II) event15 - MSI WMI hotkeys: device is a keyboard
[ 14152.644] (II) event15 - MSI WMI hotkeys: device removed
[ 14152.644] (**) Option "config_info" "udev:/sys/devices/virtual/input/input17/event15"
[ 14152.644] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 13)
[ 14152.644] (**) Option "xkb_layout" "us,ara"
[ 14152.644] (**) Option "xkb_variant" ","
[ 14152.644] (II) event15 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 14152.645] (II) event15 - MSI WMI hotkeys: device is a keyboard
[ 14154.486] (II) intel(0): EDID vendor "CMN", prod id 5590
[ 14154.486] (II) intel(0): Printing DDC gathered Modelines:
[ 14154.486] (II) intel(0): Modeline "1920x1080"x0.0 152.84 1920 1964 1992 2250 1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)
[ 14238.241] (**) Option "fd" "18"
[ 14238.241] (II) event3 - Power Button: device removed
[ 14238.241] (**) Option "fd" "21"
[ 14238.241] (II) event6 - Video Bus: device removed
[ 14238.241] (**) Option "fd" "22"
[ 14238.241] (II) event7 - Video Bus: device removed
[ 14238.241] (**) Option "fd" "23"
[ 14238.241] (II) event2 - Power Button: device removed
[ 14238.241] (**) Option "fd" "24"
[ 14238.241] (II) event1 - Sleep Button: device removed
[ 14238.242] (**) Option "fd" "25"
[ 14238.242] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 14238.242] (**) Option "fd" "26"
[ 14238.242] (II) event16 - SynPS/2 Synaptics TouchPad: device removed
[ 14238.242] (**) Option "fd" "27"
[ 14238.242] (II) event15 - MSI WMI hotkeys: device removed
[ 14238.242] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 14238.309] (II) systemd-logind: got pause for 13:66
[ 14238.309] (II) systemd-logind: got pause for 226:0
[ 14238.309] (II) systemd-logind: got pause for 13:65
[ 14238.310] (II) systemd-logind: got pause for 13:80
[ 14238.310] (II) systemd-logind: got pause for 13:68
[ 14238.310] (II) systemd-logind: got pause for 13:79
[ 14238.310] (II) systemd-logind: got pause for 13:67
[ 14238.310] (II) systemd-logind: got pause for 13:70
[ 14238.310] (II) systemd-logind: got pause for 13:71and the output of
lspciis the following
00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-H GT2 [UHD Graphics 630]
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
00:14.3 Network controller: Intel Corporation Cannon Lake PCH CNVi WiFi (rev 10)
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
00:17.0 SATA controller: Intel Corporation Cannon Lake Mobile PCH SATA AHCI Controller (rev 10)
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0)
00:1d.7 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #16 (rev f0)
00:1e.0 Communication controller: Intel Corporation Cannon Lake PCH Serial IO UART Host Controller (rev 10)
00:1f.0 ISA bridge: Intel Corporation HM470 Chipset LPC/eSPI Controller (rev 10)
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
01:00.0 VGA compatible controller: NVIDIA Corporation GP106M [GeForce GTX 1060 Mobile] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GP106 High Definition Audio Controller (rev a1)
02:00.0 Non-Volatile memory controller: Phison Electronics Corporation E12 NVMe Controller (rev 01)
03:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller (rev 10)Now I'll read the link you posted thanks again I've been trying to solve this for three weeks I was deleting it and generating and new one with different drivers identifiers..etc but haven't thought about removing it and trying without it
Last edited by sudobyter (2021-06-28 22:24:15)
Offline
#4 2021-06-29 00:07:45
- sudobyter
- Member
- Registered: 2021-06-28
- Posts: 7
Re: Xorg not working
trying to use the optimus-manager
optimus-manager --switch nvidia and the output is
ERROR: a GPU setup was initiated but Xorg post-start hook did not run.
Log at /var/log/optimus-manager/switch/switch-20210629T013313.log
If your login manager is GDM, make sure to follow those instructions:
https://github.com/Askannz/optimus-manager#important--gnome-and-gdm-users
If your display manager is neither GDM, SDDM nor LightDM, or if you don't use one, read the wiki:
https://github.com/Askannz/optimus-manager/wiki/FAQ,-common-issues,-troubleshooting
Cannot execute command because of previous errors.and the log file is
[8] INFO: # Xorg pre-start hook
[8] INFO: Previous state was: {'type': 'pending_pre_xorg_start', 'requested_mode': 'integrated', 'current_mode': None}
[8] INFO: Requested mode is: integrated
[877] INFO: Available modules: ['nouveau', 'nvidia', 'nvidia_drm', 'nvidia_modeset', 'nvidia_uvm']
[877] INFO: Unloading modules ['nvidia_drm', 'nvidia_modeset', 'nvidia_uvm', 'nvidia'] (if loaded)
[880] INFO: switching=none, nothing to do
[899] INFO: Writing to /etc/X11/xorg.conf.d/10-optimus-manager.conf
[899] INFO: Writing state {'type': 'pending_post_xorg_start', 'switch_id': '20210629T013313', 'requested_mode': 'integrated'}
[899] INFO: Xorg pre-start hook completed successfully.How to solve this one ?
Update
I ran
prime-offloadthen,
optimus-manager --switch nvidiait says it was successfully changed to nvidia , but when I ran
nvidia-smithe same output above it's not working. No usage at all for . I went to basemark to benchmark the GPU but it can't start
Last edited by sudobyter (2021-06-29 02:55:46)
Offline
#5 2021-06-29 06:32:17
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,527
Re: Xorg not working
You need to restart X11 to make optimus-manager have any impact.
However the nvidia chip doesn't show up in your (pre optimus-manager?) xorg config.
If your original intention was to use PRIME and dynamically invoke the nvidia chip on the running X11 server (to play superturboturkeypuncher3 at acceptable FPS w/o abandoning the session where you're supposed to do your homework):
remove optimus-manager, ensure there're no residuals in /{etc,usr/share}/X11/xorg.conf* and use "prime-run superturboturkeypuncher3" ("prime-run glxinfo" to see whether you can use the nvidia chip this way)
But the nvidia chip has to appear in the Xorg log for this to work, so we need to figure why it doesn't:
ls /{etc,usr/share}/X11/xorg.conf*
grep -ir nvidia /{etc,usr/share}/X11/xorg.conf*
lspci -k
dmesgOffline
#6 2021-06-29 11:47:08
- sudobyter
- Member
- Registered: 2021-06-28
- Posts: 7
Re: Xorg not working
Alright , I'll post the outputs of the following
ls /{etc,usr/share}/X11/xorg.conf*/etc/X11/xorg.conf.backup
/etc/X11/xorg.conf.nvidia-xconfig-original
/etc/X11/xorg.conf.d:
00-keyboard.conf
10-nvidia-drm-outputclass.conf
10-optimus-manager.conf
20-intel.conf
90-touchpad.conf
/usr/share/X11/xorg.conf.d:
10-nvidia-drm-outputclass.conf
10-quirks.conf
40-libinput.confgrep -ir nvidia /{etc,usr/share}/X11/xorg.conf*/etc/X11/xorg.conf.backup:# nvidia-xconfig: X configuration file generated by nvidia-xconfig
/etc/X11/xorg.conf.backup:# nvidia-xconfig: version 465.31
/etc/X11/xorg.conf.backup: Driver "nvidia"
/etc/X11/xorg.conf.backup: VendorName "NVIDIA Corporation"
/etc/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf: Identifier "nvidia"
/etc/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf: MatchDriver "nvidia-drm"
/etc/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf: Driver "nvidia"
/etc/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf: ModulePath "/usr/lib/nvidia/xorg"
/usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf: Identifier "nvidia"
/usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf: MatchDriver "nvidia-drm"
/usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf: Driver "nvidia"
/usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf: ModulePath "/usr/lib/nvidia/xorg"lspci -k00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
DeviceName: Onboard - Other
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1223
Kernel driver in use: skl_uncore
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07)
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-H GT2 [UHD Graphics 630]
DeviceName: Onboard - Video
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1223
Kernel driver in use: i915
Kernel modules: i915
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1223
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1223
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device 7270
00:14.3 Network controller: Intel Corporation Cannon Lake PCH CNVi WiFi (rev 10)
DeviceName: Onboard - Ethernet
Subsystem: Intel Corporation Wireless-AC 9560
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1223
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Cannon Lake Mobile PCH SATA AHCI Controller (rev 10)
DeviceName: Onboard - SATA
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1223
Kernel driver in use: ahci
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0)
Kernel driver in use: pcieport
00:1d.7 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #16 (rev f0)
Kernel driver in use: pcieport
00:1e.0 Communication controller: Intel Corporation Cannon Lake PCH Serial IO UART Host Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1223
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:1f.0 ISA bridge: Intel Corporation HM470 Chipset LPC/eSPI Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1223
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
DeviceName: Onboard - Sound
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 122c
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl, snd_sof_pci
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1223
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1223
01:00.0 VGA compatible controller: NVIDIA Corporation GP106M [GeForce GTX 1060 Mobile] (rev a1)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1223
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia_drm, nvidia
01:00.1 Audio device: NVIDIA Corporation GP106 High Definition Audio Controller (rev a1)
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 Non-Volatile memory controller: Phison Electronics Corporation E12 NVMe Controller (rev 01)
Subsystem: Phison Electronics Corporation E12 NVMe Controller
Kernel driver in use: nvme
03:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller (rev 10)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1223
Kernel driver in use: alx
Kernel modules: alxdmesg[ 0.000000] microcode: microcode updated early to revision 0xea, date = 2021-01-05
[ 0.000000] Linux version 5.10.46-1-lts (linux-lts@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP Wed, 23 Jun 2021 16:18:42 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=b7650301-3f4c-40cf-919e-8984dfce7ac7 rw loglevel=3 quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000005efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000060000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007833efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007833f000-0x0000000079424fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079425000-0x00000000794a1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000794a2000-0x0000000079975fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079976000-0x000000007ab48fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ab49000-0x000000007ac0dfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007ac0e000-0x000000007ac0efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ac0f000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x7943e000 ACPI=0x7943e000 TPMFinalLog=0x798e0000 SMBIOS=0x7a9a0000 SMBIOS 3.0=0x7a99f000 ESRT=0x7523ef98
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. GF62 8RE/MS-16JE, BIOS E16JEIMS.108 09/04/2018
[ 0.000000] tsc: Detected 2200.000 MHz processor
[ 0.000000] tsc: Detected 2199.996 MHz TSC
[ 0.000920] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000923] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000931] last_pfn = 0x47e000 max_arch_pfn = 0x400000000
[ 0.000936] MTRR default type: uncachable
[ 0.000937] MTRR fixed ranges enabled:
[ 0.000938] 00000-9FFFF write-back
[ 0.000939] A0000-BFFFF uncachable
[ 0.000941] C0000-FFFFF write-protect
[ 0.000941] MTRR variable ranges enabled:
[ 0.000943] 0 base 0080000000 mask 7FF0000000 write-combining
[ 0.000945] 1 base 0000000000 mask 7F80000000 write-back
[ 0.000946] 2 base 007B800000 mask 7FFF800000 uncachable
[ 0.000947] 3 base 007C000000 mask 7FFC000000 uncachable
[ 0.000948] 4 base 0100000000 mask 7F00000000 write-back
[ 0.000949] 5 base 0200000000 mask 7E00000000 write-back
[ 0.000950] 6 base 0400000000 mask 7F80000000 write-back
[ 0.000951] 7 disabled
[ 0.000952] 8 disabled
[ 0.000953] 9 disabled
[ 0.001495] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001892] last_pfn = 0x7ac0f max_arch_pfn = 0x400000000
[ 0.011468] found SMP MP-table at [mem 0x000fcdf0-0x000fcdff]
[ 0.011483] esrt: Reserving ESRT space from 0x000000007523ef98 to 0x000000007523efd0.
[ 0.011489] e820: update [mem 0x7523e000-0x7523efff] usable ==> reserved
[ 0.011505] check: Scanning 1 areas for low memory corruption
[ 0.011510] Using GB pages for direct mapping
[ 0.011832] Secure boot could not be determined
[ 0.011833] RAMDISK: [mem 0x3677b000-0x373b4fff]
[ 0.011838] ACPI: Early table checksum verification disabled
[ 0.011841] ACPI: RSDP 0x000000007943E000 000024 (v02 MSI_NB)
[ 0.011845] ACPI: XSDT 0x000000007943E0B0 0000E4 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.011852] ACPI: FACP 0x0000000079475AE8 000114 (v06 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.011859] ACPI: DSDT 0x000000007943E228 0378C0 (v02 MSI_NB MEGABOOK 01072009 INTL 20160527)
[ 0.011863] ACPI: FACS 0x0000000079975080 000040
[ 0.011866] ACPI: APIC 0x0000000079475C00 0000F4 (v04 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.011870] ACPI: FPDT 0x0000000079475CF8 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.011874] ACPI: FIDT 0x0000000079475D40 00009C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.011877] ACPI: ECDT 0x0000000079475DE0 0000C1 (v01 MSI_NB MEGABOOK 01072009 AMI. 00010013)
[ 0.011881] ACPI: MCFG 0x0000000079475EA8 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[ 0.011884] ACPI: SSDT 0x0000000079475EE8 000378 (v01 SataRe SataTabl 00001000 INTL 20160527)
[ 0.011888] ACPI: SSDT 0x0000000079476260 0017D5 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
[ 0.011892] ACPI: MSDM 0x0000000079477A38 000055 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.011896] ACPI: SLIC 0x0000000079477A90 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.011900] ACPI: SSDT 0x0000000079477C08 0031C7 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
[ 0.011904] ACPI: SSDT 0x000000007947ADD0 00218B (v02 PegSsd PegSsdt 00001000 INTL 20160527)
[ 0.011907] ACPI: HPET 0x000000007947CF60 000038 (v01 INTEL MEGABOOK 00000002 01000013)
[ 0.011911] ACPI: SSDT 0x000000007947CF98 00091E (v02 INTEL xh_cfhd4 00000000 INTL 20160527)
[ 0.011915] ACPI: UEFI 0x000000007947D8B8 000048 (v01 MSI_NB MEGABOOK 00000002 01000013)
[ 0.011918] ACPI: LPIT 0x000000007947D900 00005C (v01 INTEL MEGABOOK 00000002 01000013)
[ 0.011922] ACPI: DBGP 0x000000007947D960 000034 (v01 MSI_NB MEGABOOK 00000002 01000013)
[ 0.011926] ACPI: DBG2 0x000000007947D998 000054 (v00 MSI_NB MEGABOOK 00000002 01000013)
[ 0.011929] ACPI: SSDT 0x000000007947D9F0 0000AE (v02 SgRef SgPeg 00001000 INTL 20160527)
[ 0.011933] ACPI: DMAR 0x000000007947DAA0 0000A8 (v01 INTEL EDK2 00000002 01000013)
[ 0.011937] ACPI: BGRT 0x000000007947DB48 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.011940] ACPI: TPM2 0x000000007947DB80 000034 (v04 MSI_NB MEGABOOK 00000001 AMI 00000000)
[ 0.011944] ACPI: SSDT 0x000000007947DBB8 002207 (v01 OptRef OptTabl 00001000 INTL 20160527)
[ 0.011948] ACPI: WSMT 0x000000007947FDC0 000028 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.011951] ACPI: Reserving FACP table memory at [mem 0x79475ae8-0x79475bfb]
[ 0.011953] ACPI: Reserving DSDT table memory at [mem 0x7943e228-0x79475ae7]
[ 0.011954] ACPI: Reserving FACS table memory at [mem 0x79975080-0x799750bf]
[ 0.011955] ACPI: Reserving APIC table memory at [mem 0x79475c00-0x79475cf3]
[ 0.011956] ACPI: Reserving FPDT table memory at [mem 0x79475cf8-0x79475d3b]
[ 0.011957] ACPI: Reserving FIDT table memory at [mem 0x79475d40-0x79475ddb]
[ 0.011958] ACPI: Reserving ECDT table memory at [mem 0x79475de0-0x79475ea0]
[ 0.011959] ACPI: Reserving MCFG table memory at [mem 0x79475ea8-0x79475ee3]
[ 0.011960] ACPI: Reserving SSDT table memory at [mem 0x79475ee8-0x7947625f]
[ 0.011962] ACPI: Reserving SSDT table memory at [mem 0x79476260-0x79477a34]
[ 0.011963] ACPI: Reserving MSDM table memory at [mem 0x79477a38-0x79477a8c]
[ 0.011964] ACPI: Reserving SLIC table memory at [mem 0x79477a90-0x79477c05]
[ 0.011965] ACPI: Reserving SSDT table memory at [mem 0x79477c08-0x7947adce]
[ 0.011966] ACPI: Reserving SSDT table memory at [mem 0x7947add0-0x7947cf5a]
[ 0.011967] ACPI: Reserving HPET table memory at [mem 0x7947cf60-0x7947cf97]
[ 0.011968] ACPI: Reserving SSDT table memory at [mem 0x7947cf98-0x7947d8b5]
[ 0.011969] ACPI: Reserving UEFI table memory at [mem 0x7947d8b8-0x7947d8ff]
[ 0.011970] ACPI: Reserving LPIT table memory at [mem 0x7947d900-0x7947d95b]
[ 0.011972] ACPI: Reserving DBGP table memory at [mem 0x7947d960-0x7947d993]
[ 0.011973] ACPI: Reserving DBG2 table memory at [mem 0x7947d998-0x7947d9eb]
[ 0.011974] ACPI: Reserving SSDT table memory at [mem 0x7947d9f0-0x7947da9d]
[ 0.011975] ACPI: Reserving DMAR table memory at [mem 0x7947daa0-0x7947db47]
[ 0.011976] ACPI: Reserving BGRT table memory at [mem 0x7947db48-0x7947db7f]
[ 0.011977] ACPI: Reserving TPM2 table memory at [mem 0x7947db80-0x7947dbb3]
[ 0.011978] ACPI: Reserving SSDT table memory at [mem 0x7947dbb8-0x7947fdbe]
[ 0.011979] ACPI: Reserving WSMT table memory at [mem 0x7947fdc0-0x7947fde7]
[ 0.011996] ACPI: Local APIC address 0xfee00000
[ 0.012867] No NUMA configuration found
[ 0.012868] Faking a node at [mem 0x0000000000000000-0x000000047dffffff]
[ 0.012872] NODE_DATA(0) allocated [mem 0x47dffc000-0x47dffffff]
[ 0.012910] Zone ranges:
[ 0.012911] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012913] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012914] Normal [mem 0x0000000100000000-0x000000047dffffff]
[ 0.012916] Device empty
[ 0.012917] Movable zone start for each node
[ 0.012918] Early memory node ranges
[ 0.012919] node 0: [mem 0x0000000000001000-0x000000000005efff]
[ 0.012920] node 0: [mem 0x0000000000060000-0x000000000009ffff]
[ 0.012921] node 0: [mem 0x0000000000100000-0x000000007833efff]
[ 0.012922] node 0: [mem 0x000000007ac0e000-0x000000007ac0efff]
[ 0.012923] node 0: [mem 0x0000000100000000-0x000000047dffffff]
[ 0.012926] Initmem setup node 0 [mem 0x0000000000001000-0x000000047dffffff]
[ 0.012928] On node 0 totalpages: 4154078
[ 0.012929] DMA zone: 64 pages used for memmap
[ 0.012930] DMA zone: 27 pages reserved
[ 0.012931] DMA zone: 3998 pages, LIFO batch:0
[ 0.013245] DMA zone: 28770 pages in unavailable ranges
[ 0.013246] DMA32 zone: 7629 pages used for memmap
[ 0.013247] DMA32 zone: 488256 pages, LIFO batch:63
[ 0.016557] DMA32 zone: 31936 pages in unavailable ranges
[ 0.016558] Normal zone: 57216 pages used for memmap
[ 0.016559] Normal zone: 3661824 pages, LIFO batch:63
[ 0.039277] Normal zone: 8192 pages in unavailable ranges
[ 0.039281] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.039311] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.040338] ACPI: PM-Timer IO Port: 0x1808
[ 0.040340] ACPI: Local APIC address 0xfee00000
[ 0.040348] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.040349] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.040350] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.040351] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.040351] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.040352] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.040353] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.040354] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.040355] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.040355] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.040356] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.040357] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.040420] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.040422] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.040424] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.040425] ACPI: IRQ0 used by override.
[ 0.040427] ACPI: IRQ9 used by override.
[ 0.040429] Using ACPI (MADT) for SMP configuration information
[ 0.040431] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.040438] e820: update [mem 0x746b9000-0x747acfff] usable ==> reserved
[ 0.040449] TSC deadline timer available
[ 0.040450] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.040472] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.040474] PM: hibernation: Registered nosave memory: [mem 0x0005f000-0x0005ffff]
[ 0.040476] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.040478] PM: hibernation: Registered nosave memory: [mem 0x746b9000-0x747acfff]
[ 0.040480] PM: hibernation: Registered nosave memory: [mem 0x7523e000-0x7523efff]
[ 0.040482] PM: hibernation: Registered nosave memory: [mem 0x7833f000-0x79424fff]
[ 0.040483] PM: hibernation: Registered nosave memory: [mem 0x79425000-0x794a1fff]
[ 0.040484] PM: hibernation: Registered nosave memory: [mem 0x794a2000-0x79975fff]
[ 0.040485] PM: hibernation: Registered nosave memory: [mem 0x79976000-0x7ab48fff]
[ 0.040486] PM: hibernation: Registered nosave memory: [mem 0x7ab49000-0x7ac0dfff]
[ 0.040488] PM: hibernation: Registered nosave memory: [mem 0x7ac0f000-0x7fffffff]
[ 0.040489] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.040489] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.040490] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.040491] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.040492] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.040493] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.040494] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.040494] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.040495] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[ 0.040496] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.040497] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.040498] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.040499] [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.040501] Booting paravirtualized kernel on bare hardware
[ 0.040504] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.047007] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:12 nr_node_ids:1
[ 0.047393] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
[ 0.047402] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
[ 0.047403] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[ 0.047436] Built 1 zonelists, mobility grouping on. Total pages: 4089142
[ 0.047437] Policy zone: Normal
[ 0.047438] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=b7650301-3f4c-40cf-919e-8984dfce7ac7 rw loglevel=3 quiet
[ 0.048563] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.049080] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.049203] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.087770] Memory: 16119680K/16616312K available (14343K kernel code, 2030K rwdata, 8788K rodata, 1716K init, 4348K bss, 496372K reserved, 0K cma-reserved)
[ 0.087778] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0
[ 0.087933] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.087949] Kernel/User page tables isolation: enabled
[ 0.087967] ftrace: allocating 41548 entries in 163 pages
[ 0.105422] ftrace: allocated 163 pages with 4 groups
[ 0.105541] rcu: Hierarchical RCU implementation.
[ 0.105542] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
[ 0.105543] Rude variant of Tasks RCU enabled.
[ 0.105544] Tracing variant of Tasks RCU enabled.
[ 0.105545] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.105546] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.109800] NR_IRQS: 20736, nr_irqs: 2152, preallocated irqs: 16
[ 0.111206] Console: colour dummy device 80x25
[ 0.111225] printk: console [tty0] enabled
[ 0.111245] ACPI: Core revision 20200925
[ 0.111576] APIC: Switch to symmetric I/O mode setup
[ 0.111579] DMAR: Host address width 39
[ 0.111580] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.111586] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.111588] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.111592] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.111593] DMAR: RMRR base: 0x000000789c4000 end: 0x000000789e3fff
[ 0.111594] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[ 0.111597] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.111597] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.111598] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.119703] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.119704] x2apic enabled
[ 0.119736] Switched APIC routing to cluster x2apic.
[ 0.138018] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns
[ 0.138023] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=21999960)
[ 0.138026] pid_max: default: 32768 minimum: 301
[ 0.142667] LSM: Security Framework initializing
[ 0.142672] Yama: becoming mindful.
[ 0.142718] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.142745] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.143071] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.143105] process: using mwait in idle threads
[ 0.143108] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.143109] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.143111] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.143113] Spectre V2 : Mitigation: Full generic retpoline
[ 0.143114] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.143114] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.143116] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.143117] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.143118] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.143124] SRBDS: Mitigation: Microcode
[ 0.143124] MDS: Mitigation: Clear CPU buffers
[ 0.143401] Freeing SMP alternatives memory: 36K
[ 0.148020] smpboot: CPU0: Intel(R) Core(TM) i7-8750H CPU @ 2.20GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[ 0.148020] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.148020] ... version: 4
[ 0.148020] ... bit width: 48
[ 0.148020] ... generic registers: 4
[ 0.148020] ... value mask: 0000ffffffffffff
[ 0.148020] ... max period: 00007fffffffffff
[ 0.148020] ... fixed-purpose events: 3
[ 0.148020] ... event mask: 000000070000000f
[ 0.148020] rcu: Hierarchical SRCU implementation.
[ 0.148020] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.148020] smp: Bringing up secondary CPUs ...
[ 0.148020] x86: Booting SMP configuration:
[ 0.148020] .... node #0, CPUs: #1 #2 #3 #4 #5 #6
[ 0.150881] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.150881] #7 #8 #9 #10 #11
[ 0.158758] smp: Brought up 1 node, 12 CPUs
[ 0.158758] smpboot: Max logical packages: 1
[ 0.158758] smpboot: Total of 12 processors activated (52799.90 BogoMIPS)
[ 0.162936] devtmpfs: initialized
[ 0.162936] x86/mm: Memory block size: 128MB
[ 0.162936] PM: Registering ACPI NVS region [mem 0x794a2000-0x79975fff] (5062656 bytes)
[ 0.162936] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.162936] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.162936] pinctrl core: initialized pinctrl subsystem
[ 0.162936] PM: RTC time: 11:18:12, date: 2021-06-29
[ 0.162936] NET: Registered protocol family 16
[ 0.162936] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.168038] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.168190] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.168197] audit: initializing netlink subsys (disabled)
[ 0.168204] audit: type=2000 audit(1624965492.030:1): state=initialized audit_enabled=0 res=1
[ 0.168204] thermal_sys: Registered thermal governor 'fair_share'
[ 0.168204] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.168204] thermal_sys: Registered thermal governor 'step_wise'
[ 0.168204] thermal_sys: Registered thermal governor 'user_space'
[ 0.168204] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.168204] cpuidle: using governor ladder
[ 0.168204] cpuidle: using governor menu
[ 0.168204] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.168204] ACPI: bus type PCI registered
[ 0.168204] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.168223] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.168225] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.168243] PCI: Using configuration type 1 for base access
[ 0.168732] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.169073] Kprobes globally optimized
[ 0.169078] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.169078] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.169078] ACPI: Added _OSI(Module Device)
[ 0.169078] ACPI: Added _OSI(Processor Device)
[ 0.169078] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.169078] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.169078] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.169078] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.169078] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.231136] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.233582] ACPI: EC: EC started
[ 0.233583] ACPI: EC: interrupt blocked
[ 0.240011] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.240012] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.248705] ACPI: Dynamic OEM Table Load:
[ 0.248714] ACPI: SSDT 0xFFFF894D00CB0000 0005BE (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.250732] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.251934] ACPI: Dynamic OEM Table Load:
[ 0.251940] ACPI: SSDT 0xFFFF894D01670C00 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.254512] ACPI: Dynamic OEM Table Load:
[ 0.254521] ACPI: SSDT 0xFFFF894D00D05000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.257700] ACPI: Dynamic OEM Table Load:
[ 0.257705] ACPI: SSDT 0xFFFF894D01677400 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.264822] ACPI: Interpreter enabled
[ 0.264876] ACPI: (supports S0 S3 S4 S5)
[ 0.264877] ACPI: Using IOAPIC for interrupt routing
[ 0.264929] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.265611] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.270234] ACPI: Power Resource [PG00] (on)
[ 0.289768] ACPI: Power Resource [USBC] (on)
[ 0.294540] ACPI: Power Resource [V0PR] (on)
[ 0.294830] ACPI: Power Resource [V1PR] (on)
[ 0.295112] ACPI: Power Resource [V2PR] (on)
[ 0.301656] ACPI: Power Resource [WRST] (on)
[ 0.304462] ACPI: Power Resource [PIN] (off)
[ 0.305151] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.305159] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.305459] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.305743] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
[ 0.305744] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.307779] PCI host bridge to bus 0000:00
[ 0.307782] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.307783] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.307784] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.307786] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.307787] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.307788] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc00ffff window]
[ 0.307789] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.307813] pci 0000:00:00.0: [8086:3ec4] type 00 class 0x060000
[ 0.307970] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.308020] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.308530] pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
[ 0.308541] pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit]
[ 0.308547] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.308552] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.308572] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.309355] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[ 0.309467] pci 0000:00:12.0: reg 0x10: [mem 0xa4422000-0xa4422fff 64bit]
[ 0.310068] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.310108] pci 0000:00:14.0: reg 0x10: [mem 0xa4400000-0xa440ffff 64bit]
[ 0.310427] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.310940] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.311115] pci 0000:00:14.2: reg 0x10: [mem 0xa441a000-0xa441bfff 64bit]
[ 0.311210] pci 0000:00:14.2: reg 0x18: [mem 0xa4421000-0xa4421fff 64bit]
[ 0.312340] pci 0000:00:14.3: [8086:a370] type 00 class 0x028000
[ 0.312656] pci 0000:00:14.3: reg 0x10: [mem 0xa4414000-0xa4417fff 64bit]
[ 0.314913] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ 0.316163] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.316200] pci 0000:00:16.0: reg 0x10: [mem 0xa4420000-0xa4420fff 64bit]
[ 0.316416] pci 0000:00:16.0: PME# supported from D3hot
[ 0.316973] pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
[ 0.317006] pci 0000:00:17.0: reg 0x10: [mem 0xa4418000-0xa4419fff]
[ 0.317024] pci 0000:00:17.0: reg 0x14: [mem 0xa441f000-0xa441f0ff]
[ 0.317042] pci 0000:00:17.0: reg 0x18: [io 0x5090-0x5097]
[ 0.317059] pci 0000:00:17.0: reg 0x1c: [io 0x5080-0x5083]
[ 0.317077] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
[ 0.317094] pci 0000:00:17.0: reg 0x24: [mem 0xa441e000-0xa441e7ff]
[ 0.317338] pci 0000:00:17.0: PME# supported from D3hot
[ 0.317953] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[ 0.318410] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.318474] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[ 0.319064] pci 0000:00:1d.7: [8086:a337] type 01 class 0x060400
[ 0.319526] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.319879] pci 0000:00:1d.7: PTM enabled (root), 4ns granularity
[ 0.321106] pci 0000:00:1e.0: [8086:a328] type 00 class 0x078000
[ 0.322061] pci 0000:00:1e.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.326535] pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100
[ 0.327302] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[ 0.327364] pci 0000:00:1f.3: reg 0x10: [mem 0xa4410000-0xa4413fff 64bit]
[ 0.327511] pci 0000:00:1f.3: reg 0x20: [mem 0xa4100000-0xa41fffff 64bit]
[ 0.327751] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.328401] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.328843] pci 0000:00:1f.4: reg 0x10: [mem 0xa441c000-0xa441c0ff 64bit]
[ 0.329376] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.330273] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.330374] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.330748] pci 0000:01:00.0: [10de:1c20] type 00 class 0x030000
[ 0.330756] pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
[ 0.330763] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.330770] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[ 0.330775] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
[ 0.330780] pci 0000:01:00.0: reg 0x30: [mem 0xa4000000-0xa407ffff pref]
[ 0.330796] pci 0000:01:00.0: Enabling HDA controller
[ 0.331051] pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
[ 0.331060] pci 0000:01:00.1: reg 0x10: [mem 0xa4080000-0xa4083fff]
[ 0.331178] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.331181] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.331183] pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff]
[ 0.331187] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[ 0.331601] pci 0000:02:00.0: [1987:5012] type 00 class 0x010802
[ 0.331893] pci 0000:02:00.0: reg 0x10: [mem 0xa4300000-0xa4303fff 64bit]
[ 0.333195] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.333206] pci 0000:00:1d.0: bridge window [mem 0xa4300000-0xa43fffff]
[ 0.333372] pci 0000:03:00.0: [1969:e0a1] type 00 class 0x020000
[ 0.333416] pci 0000:03:00.0: reg 0x10: [mem 0xa4200000-0xa423ffff 64bit]
[ 0.333433] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x307f]
[ 0.333633] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.333778] pci 0000:00:1d.7: PCI bridge to [bus 03]
[ 0.333784] pci 0000:00:1d.7: bridge window [io 0x3000-0x3fff]
[ 0.333790] pci 0000:00:1d.7: bridge window [mem 0xa4200000-0xa42fffff]
[ 0.336451] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[ 0.336505] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[ 0.336557] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[ 0.336608] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[ 0.336659] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[ 0.336709] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[ 0.336760] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[ 0.336810] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[ 0.337619] ACPI: EC: interrupt unblocked
[ 0.337620] ACPI: EC: event unblocked
[ 0.337782] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.337783] ACPI: EC: GPE=0x13
[ 0.337785] ACPI: \_SB_.PCI0.LPCB.EC__: Boot ECDT EC initialization complete
[ 0.337786] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.337860] iommu: Default domain type: Translated
[ 0.338040] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.338040] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.338040] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.338040] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.338040] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.338040] vgaarb: loaded
[ 0.338149] SCSI subsystem initialized
[ 0.338149] libata version 3.00 loaded.
[ 0.338149] ACPI: bus type USB registered
[ 0.338149] usbcore: registered new interface driver usbfs
[ 0.338149] usbcore: registered new interface driver hub
[ 0.338149] usbcore: registered new device driver usb
[ 0.338149] pps_core: LinuxPPS API ver. 1 registered
[ 0.338149] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.338149] PTP clock support registered
[ 0.338149] EDAC MC: Ver: 3.0.0
[ 0.338911] Registered efivars operations
[ 0.338911] NetLabel: Initializing
[ 0.338911] NetLabel: domain hash size = 128
[ 0.338911] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.338911] NetLabel: unlabeled traffic allowed by default
[ 0.338911] PCI: Using ACPI for IRQ routing
[ 0.508821] PCI: pci_cache_line_size set to 64 bytes
[ 0.509100] e820: reserve RAM buffer [mem 0x0005f000-0x0005ffff]
[ 0.509102] e820: reserve RAM buffer [mem 0x746b9000-0x77ffffff]
[ 0.509103] e820: reserve RAM buffer [mem 0x7523e000-0x77ffffff]
[ 0.509104] e820: reserve RAM buffer [mem 0x7833f000-0x7bffffff]
[ 0.509105] e820: reserve RAM buffer [mem 0x7ac0f000-0x7bffffff]
[ 0.509106] e820: reserve RAM buffer [mem 0x47e000000-0x47fffffff]
[ 0.518037] clocksource: Switched to clocksource tsc-early
[ 0.530195] VFS: Disk quotas dquot_6.6.0
[ 0.530213] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.530284] pnp: PnP ACPI init
[ 0.530590] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.530592] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.530598] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.530619] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.530757] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.530761] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.530811] pnp 00:03: Plug and Play ACPI device, IDs SYN1509 SYN1500 SYN0002 PNP0f13 SYN1507 (active)
[ 0.530837] pnp 00:04: Plug and Play ACPI device, IDs MSI0007 PNP0303 (active)
[ 0.532106] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.532108] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.532109] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.532110] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.532112] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.532114] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.532115] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.532116] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.532121] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.532457] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 0.532459] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.532460] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.532462] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.532463] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.532465] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.532466] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.532470] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.532925] system 00:07: [io 0x2000-0x20fe] has been reserved
[ 0.532929] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.533337] system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved
[ 0.533339] system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[ 0.533340] system 00:08: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[ 0.533341] system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved
[ 0.533345] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.534876] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.535654] pnp: PnP ACPI: found 10 devices
[ 0.541337] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.541401] NET: Registered protocol family 2
[ 0.541575] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.543784] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.543875] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.544081] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.544165] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.544246] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.544313] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.544363] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.544432] NET: Registered protocol family 1
[ 0.544437] NET: Registered protocol family 44
[ 0.544453] pci 0000:00:1e.0: BAR 0: assigned [mem 0xa441d000-0xa441dfff 64bit]
[ 0.544931] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.544933] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.544936] pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff]
[ 0.544938] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[ 0.544942] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.544954] pci 0000:00:1d.0: bridge window [mem 0xa4300000-0xa43fffff]
[ 0.544969] pci 0000:00:1d.7: PCI bridge to [bus 03]
[ 0.544973] pci 0000:00:1d.7: bridge window [io 0x3000-0x3fff]
[ 0.544981] pci 0000:00:1d.7: bridge window [mem 0xa4200000-0xa42fffff]
[ 0.544997] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.544998] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.545000] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.545001] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
[ 0.545002] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[ 0.545003] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfc00ffff window]
[ 0.545004] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.545006] pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff]
[ 0.545007] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[ 0.545008] pci_bus 0000:02: resource 1 [mem 0xa4300000-0xa43fffff]
[ 0.545009] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.545010] pci_bus 0000:03: resource 1 [mem 0xa4200000-0xa42fffff]
[ 0.545209] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.545862] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.545879] PCI: CLS 64 bytes, default 64
[ 0.545938] Trying to unpack rootfs image as initramfs...
[ 0.613570] Freeing initrd memory: 12520K
[ 0.613624] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.613627] software IO TLB: mapped [mem 0x000000006c2e4000-0x00000000702e4000] (64MB)
[ 0.614659] check: Scanning for low memory corruption every 60 seconds
[ 0.615017] Initialise system trusted keyrings
[ 0.615033] Key type blacklist registered
[ 0.615075] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.616193] zbud: loaded
[ 0.626695] Key type asymmetric registered
[ 0.626697] Asymmetric key parser 'x509' registered
[ 0.626703] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.626737] io scheduler mq-deadline registered
[ 0.626738] io scheduler kyber registered
[ 0.626759] io scheduler bfq registered
[ 0.626879] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.627681] pcieport 0000:00:1d.0: AER: enabled with IRQ 123
[ 0.627766] pcieport 0000:00:1d.0: DPC: enabled with IRQ 123
[ 0.627768] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 0.628362] pcieport 0000:00:1d.7: AER: enabled with IRQ 124
[ 0.628407] pcieport 0000:00:1d.7: DPC: enabled with IRQ 124
[ 0.628408] pcieport 0000:00:1d.7: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 0.628653] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.628687] efifb: probing for efifb
[ 0.628714] efifb: Ignoring BGRT: unexpected or invalid BMP data
[ 0.628715] efifb: framebuffer at 0x80000000, using 1920k, total 1920k
[ 0.628716] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.628717] efifb: scrolling: redraw
[ 0.628718] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.628750] fbcon: Deferring console take-over
[ 0.628751] fb0: EFI VGA frame buffer device
[ 0.628758] intel_idle: MWAIT substates: 0x11142120
[ 0.628759] intel_idle: v0.5.1 model 0x9E
[ 0.629442] intel_idle: Local APIC timer is reliable in all C-states
[ 0.631140] ACPI: AC Adapter [ADP1] (on-line)
[ 0.631211] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C09:00/PNP0C0D:00/input/input0
[ 0.631378] ACPI: Lid Switch [LID0]
[ 0.631448] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.631468] ACPI: Sleep Button [SLPB]
[ 0.631495] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.631510] ACPI: Power Button [PWRB]
[ 0.631534] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.631702] ACPI: Power Button [PWRF]
[ 0.637099] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.637101] ACPI: Thermal Zone [THRM] (35 C)
[ 0.637346] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.639489] hpet_acpi_add: no address or irqs in _CRS
[ 0.639540] Non-volatile memory driver v1.3
[ 0.639541] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.639542] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.641505] nvme nvme0: pci function 0000:02:00.0
[ 0.641534] ahci 0000:00:17.0: version 3.0
[ 0.642947] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x31 impl SATA mode
[ 0.642949] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
[ 0.658527] nvme nvme0: missing or invalid SUBNQN field.
[ 0.658545] nvme nvme0: Shutdown timeout set to 10 seconds
[ 0.661897] nvme nvme0: 8/0/0 default/read/poll queues
[ 0.664084] nvme0n1: p1 p2
[ 0.699126] scsi host0: ahci
[ 0.699493] scsi host1: ahci
[ 0.699834] scsi host2: ahci
[ 0.700083] scsi host3: ahci
[ 0.700235] scsi host4: ahci
[ 0.700391] scsi host5: ahci
[ 0.700429] ata1: SATA max UDMA/133 abar m2048@0xa441e000 port 0xa441e100 irq 125
[ 0.700430] ata2: DUMMY
[ 0.700431] ata3: DUMMY
[ 0.700432] ata4: DUMMY
[ 0.700435] ata5: SATA max UDMA/133 abar m2048@0xa441e000 port 0xa441e300 irq 125
[ 0.700438] ata6: SATA max UDMA/133 abar m2048@0xa441e000 port 0xa441e380 irq 125
[ 0.700476] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.700491] ehci-pci: EHCI PCI platform driver
[ 0.700506] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.700508] ohci-pci: OHCI PCI platform driver
[ 0.700515] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.700553] usbcore: registered new interface driver usbserial_generic
[ 0.700558] usbserial: USB Serial support registered for generic
[ 0.700777] rtc_cmos 00:01: RTC can wake from S4
[ 0.702932] rtc_cmos 00:01: registered as rtc0
[ 0.703350] rtc_cmos 00:01: setting system clock to 2021-06-29T11:18:13 UTC (1624965493)
[ 0.703363] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 0.703403] intel_pstate: Intel P-state driver initializing
[ 0.704248] intel_pstate: Disabling energy efficiency optimization
[ 0.704249] intel_pstate: HWP enabled
[ 0.704694] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.704988] hid: raw HID events driver (C) Jiri Kosina
[ 0.705125] intel_pmc_core INT33A1:00: initialized
[ 0.705208] drop_monitor: Initializing network drop monitor service
[ 0.705275] Initializing XFRM netlink socket
[ 0.705374] NET: Registered protocol family 10
[ 0.713495] Segment Routing with IPv6
[ 0.713497] RPL Segment Routing with IPv6
[ 0.713529] NET: Registered protocol family 17
[ 0.715236] microcode: sig=0x906ea, pf=0x20, revision=0xea
[ 0.715587] microcode: Microcode Update Driver: v2.2.
[ 0.715592] IPI shorthand broadcast: enabled
[ 0.715605] sched_clock: Marking stable (688042756, 27067841)->(726944935, -11834338)
[ 0.715930] registered taskstats version 1
[ 0.715944] Loading compiled-in X.509 certificates
[ 0.722022] Loaded X.509 cert 'Build time autogenerated kernel key: c6890dbdeb25ffe4a5d9c70e281fb11c323a24ec'
[ 0.722546] zswap: loaded using pool lz4/z3fold
[ 0.723044] Key type ._fscrypt registered
[ 0.723046] Key type .fscrypt registered
[ 0.723048] Key type fscrypt-provisioning registered
[ 0.725476] PM: Magic number: 9:616:328
[ 0.725873] RAS: Correctable Errors collector initialized.
[ 0.788495] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 1.038408] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.038454] ata1: SATA link down (SStatus 4 SControl 300)
[ 1.038576] ata6: SATA link down (SStatus 4 SControl 300)
[ 1.041968] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.041974] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.041978] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.042573] ata5.00: supports DRM functions and may not be fully accessible
[ 1.043989] ata5.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT04B6Q, max UDMA/133
[ 1.043994] ata5.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.049086] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.049092] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.049095] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.049559] ata5.00: supports DRM functions and may not be fully accessible
[ 1.053729] ata5.00: configured for UDMA/133
[ 1.053962] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 860 4B6Q PQ: 0 ANSI: 5
[ 1.054267] ata5.00: Enabling discard_zeroes_data
[ 1.054352] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.054367] sd 4:0:0:0: [sda] Write Protect is off
[ 1.054371] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.054394] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.057999] sda: sda1 sda2 sda3 sda4
[ 1.059049] ata5.00: Enabling discard_zeroes_data
[ 1.060430] sd 4:0:0:0: [sda] supports TCG Opal
[ 1.060435] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.063146] Freeing unused decrypted memory: 2036K
[ 1.063746] Freeing unused kernel image (initmem) memory: 1716K
[ 1.118328] Write protecting the kernel read-only data: 26624k
[ 1.119544] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.120206] Freeing unused kernel image (rodata/data gap) memory: 1452K
[ 1.160883] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.160886] rodata_test: all tests were successful
[ 1.160887] x86/mm: Checking user space page tables
[ 1.197544] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.197547] Run /init as init process
[ 1.197548] with arguments:
[ 1.197548] /init
[ 1.197549] with environment:
[ 1.197549] HOME=/
[ 1.197550] TERM=linux
[ 1.197550] BOOT_IMAGE=/boot/vmlinuz-linux-lts
[ 1.327365] fbcon: Taking over console
[ 1.327408] Console: switching to colour frame buffer device 100x37
[ 1.380358] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.386203] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.386205] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.388770] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.388774] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.390311] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810
[ 1.390320] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.390610] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.390611] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.390612] usb usb1: Product: xHCI Host Controller
[ 1.390613] usb usb1: Manufacturer: Linux 5.10.46-1-lts xhci-hcd
[ 1.390614] usb usb1: SerialNumber: 0000:00:14.0
[ 1.390735] hub 1-0:1.0: USB hub found
[ 1.390763] hub 1-0:1.0: 16 ports detected
[ 1.392092] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.392095] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.392096] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.392132] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.392133] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.392134] usb usb2: Product: xHCI Host Controller
[ 1.392134] usb usb2: Manufacturer: Linux 5.10.46-1-lts xhci-hcd
[ 1.392135] usb usb2: SerialNumber: 0000:00:14.0
[ 1.392216] hub 2-0:1.0: USB hub found
[ 1.392241] hub 2-0:1.0: 8 ports detected
[ 1.420013] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.473187] random: fast init done
[ 1.556230] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.648122] tsc: Refined TSC clocksource calibration: 2208.003 MHz
[ 1.648136] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3bb134e8, max_idle_ns: 440795232661 ns
[ 1.648210] clocksource: Switched to clocksource tsc
[ 1.698049] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[ 1.796157] systemd[1]: systemd 248.3-2-arch running in system mode. (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 1.818356] systemd[1]: Detected architecture x86-64.
[ 1.903570] random: lvmconfig: uninitialized urandom read (4 bytes read)
[ 1.911259] usb 1-7: New USB device found, idVendor=1770, idProduct=ff00, bcdDevice= 1.10
[ 1.911260] usb 1-7: New USB device strings: Mfr=1, Product=1, SerialNumber=1
[ 1.911261] usb 1-7: Product: MSI EPF USB
[ 1.911262] usb 1-7: Manufacturer: MSI EPF USB
[ 1.911263] usb 1-7: SerialNumber: MSI EPF USB
[ 2.058111] usb 1-12: new high-speed USB device number 3 using xhci_hcd
[ 2.073147] systemd[1]: Queued start job for default target Graphical Interface.
[ 2.074698] systemd[1]: Created slice system-getty.slice.
[ 2.074888] systemd[1]: Created slice system-modprobe.slice.
[ 2.075092] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.075228] systemd[1]: Created slice User and Session Slice.
[ 2.075277] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.075315] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.075429] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.075455] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.075468] systemd[1]: Reached target Login Prompts.
[ 2.075487] systemd[1]: Reached target Paths.
[ 2.075500] systemd[1]: Reached target Remote File Systems.
[ 2.075509] systemd[1]: Reached target Slices.
[ 2.075531] systemd[1]: Reached target Local Verity Integrity Protected Volumes.
[ 2.075584] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.075651] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.076495] systemd[1]: Listening on Process Core Dump Socket.
[ 2.076616] systemd[1]: Listening on Journal Audit Socket.
[ 2.076690] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.076770] systemd[1]: Listening on Journal Socket.
[ 2.077133] systemd[1]: Listening on udev Control Socket.
[ 2.077201] systemd[1]: Listening on udev Kernel Socket.
[ 2.077749] systemd[1]: Mounting Huge Pages File System...
[ 2.078382] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.078972] systemd[1]: Mounting Kernel Debug File System...
[ 2.079554] systemd[1]: Mounting Kernel Trace File System...
[ 2.080196] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 2.080656] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 2.081176] systemd[1]: Starting Load Kernel Module configfs...
[ 2.081721] systemd[1]: Starting Load Kernel Module drm...
[ 2.082278] systemd[1]: Starting Load Kernel Module fuse...
[ 2.082819] random: lvm: uninitialized urandom read (4 bytes read)
[ 2.084228] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 2.084266] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 2.085360] systemd[1]: Starting Journal Service...
[ 2.086763] systemd[1]: Starting Load Kernel Modules...
[ 2.087170] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.087735] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 2.088199] systemd[1]: Starting Coldplug All udev Devices...
[ 2.088400] Linux agpgart interface v0.103
[ 2.089201] systemd[1]: Mounted Huge Pages File System.
[ 2.089261] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.089308] systemd[1]: Mounted Kernel Debug File System.
[ 2.089361] systemd[1]: Mounted Kernel Trace File System.
[ 2.089509] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 2.089665] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 2.089772] systemd[1]: Finished Load Kernel Module configfs.
[ 2.090251] systemd[1]: Mounting Kernel Configuration File System...
[ 2.091175] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 2.091732] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.091816] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 2.093839] fuse: init (API version 7.32)
[ 2.094154] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 2.094646] systemd[1]: Starting Load/Save Random Seed...
[ 2.095342] systemd[1]: Starting Create System Users...
[ 2.096088] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 2.096273] systemd[1]: Finished Load Kernel Module fuse.
[ 2.096318] audit: type=1130 audit(1624965494.874:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.096326] audit: type=1131 audit(1624965494.874:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.096412] systemd[1]: Mounted Kernel Configuration File System.
[ 2.097199] systemd[1]: Mounting FUSE Control File System...
[ 2.099569] systemd[1]: Mounted FUSE Control File System.
[ 2.104836] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 2.108196] Asymmetric key parser 'pkcs8' registered
[ 2.117011] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 2.117136] systemd[1]: Finished Load Kernel Module drm.
[ 2.117195] audit: type=1130 audit(1624965494.894:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.117197] audit: type=1131 audit(1624965494.894:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.119737] systemd[1]: Started Journal Service.
[ 2.119803] audit: type=1130 audit(1624965494.904:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.124171] systemd-journald[262]: Received client request to flush runtime journal.
[ 2.128893] audit: type=1130 audit(1624965494.914:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.171692] audit: type=1130 audit(1624965494.954:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.172233] audit: type=1334 audit(1624965494.954:9): prog-id=14 op=LOAD
[ 2.172326] audit: type=1334 audit(1624965494.954:10): prog-id=15 op=LOAD
[ 2.249245] usb 1-12: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 2.249248] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.249249] usb 1-12: Product: USB2.0-CRW
[ 2.249250] usb 1-12: Manufacturer: Generic
[ 2.249251] usb 1-12: SerialNumber: 20100201396000000
[ 2.306220] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 2.345303] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[ 2.345711] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 2.348732] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.349030] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.349787] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.350550] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 2.351724] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 2.362431] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [30:9c:23:ff:51:3a]
[ 2.398076] usb 1-14: new full-speed USB device number 4 using xhci_hcd
[ 2.458939] Adding 20971516k swap on /dev/sda3. Priority:-2 extents:1 across:20971516k SSFS
[ 2.538342] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 2.557116] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.557462] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.557463] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.557464] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.557464] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.557464] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.557465] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.561048] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.561585] cryptd: max_cpu_qlen set to 1000
[ 2.569021] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.569024] cfg80211: failed to load regulatory.db
[ 2.571977] AVX2 version of gcm_enc/dec engaged.
[ 2.571978] AES CTR mode by8 optimization enabled
[ 2.586348] Intel(R) Wireless WiFi driver for Linux
[ 2.586473] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[ 2.589686] usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[ 2.589688] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.597533] iwlwifi 0000:00:14.3: WRT: Overriding region id 0
[ 2.597534] iwlwifi 0000:00:14.3: WRT: Overriding region id 1
[ 2.597535] iwlwifi 0000:00:14.3: WRT: Overriding region id 2
[ 2.597535] iwlwifi 0000:00:14.3: WRT: Overriding region id 3
[ 2.597536] iwlwifi 0000:00:14.3: WRT: Overriding region id 4
[ 2.597537] iwlwifi 0000:00:14.3: WRT: Overriding region id 6
[ 2.597537] iwlwifi 0000:00:14.3: WRT: Overriding region id 8
[ 2.597538] iwlwifi 0000:00:14.3: WRT: Overriding region id 9
[ 2.597538] iwlwifi 0000:00:14.3: WRT: Overriding region id 10
[ 2.597539] iwlwifi 0000:00:14.3: WRT: Overriding region id 11
[ 2.597540] iwlwifi 0000:00:14.3: WRT: Overriding region id 15
[ 2.597540] iwlwifi 0000:00:14.3: WRT: Overriding region id 16
[ 2.597541] iwlwifi 0000:00:14.3: WRT: Overriding region id 18
[ 2.597541] iwlwifi 0000:00:14.3: WRT: Overriding region id 19
[ 2.597542] iwlwifi 0000:00:14.3: WRT: Overriding region id 20
[ 2.597542] iwlwifi 0000:00:14.3: WRT: Overriding region id 21
[ 2.597543] iwlwifi 0000:00:14.3: WRT: Overriding region id 28
[ 2.597768] iwlwifi 0000:00:14.3: loaded firmware version 46.6f9f215c.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
[ 2.670778] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.728898] loop: module loaded
[ 2.860682] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.862796] usbcore: registered new interface driver rtsx_usb
[ 2.895398] checking generic (80000000 1e0000) vs hw (a2000000 1000000)
[ 2.895400] checking generic (80000000 1e0000) vs hw (80000000 10000000)
[ 2.895401] fb0: switching to inteldrmfb from EFI VGA
[ 2.895516] Console: switching to colour dummy device 80x25
[ 2.895542] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.896355] usbcore: registered new interface driver usbhid
[ 2.896356] usbhid: USB HID core driver
[ 2.898010] iwlwifi 0000:00:14.3: Detected Intel(R) Wireless-AC 9560 160MHz, REV=0x318
[ 2.901976] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.909158] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.909755] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 2.909810] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 2.909814] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 2.909903] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 2.916695] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 2.920801] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.921090] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 2.921211] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 2.921228] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input9
[ 2.921394] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.922493] fbcon: i915drmfb (fb0) is primary device
[ 2.932077] Console: switching to colour frame buffer device 240x67
[ 2.937258] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 2.937281] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 2.937300] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 2.937321] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 2.937339] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 2.953552] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 2.955376] iwlwifi 0000:00:14.3: base HW address: 3c:6a:a7:c7:72:fc
[ 3.024718] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.024900] thermal thermal_zone3: failed to read out thermal zone (-61)
[ 3.032899] alx 0000:03:00.0 enp3s0: renamed from eth0
[ 3.148707] iTCO_vendor_support: vendor-support=0
[ 3.152517] dw-apb-uart.0: ttyS4 at MMIO 0xa441d000 (irq = 20, base_baud = 7500000) is a 16550A
[ 3.152903] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 3.156393] input: MSI WMI hotkeys as /devices/virtual/input/input15
[ 3.163544] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.163619] iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[ 3.163906] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.169582] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 3.194462] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x15/0x1b/0x17/0x0/0x0) type:speaker
[ 3.194466] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.194468] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 3.194469] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.194471] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 3.194472] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.194474] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 3.194475] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 3.202553] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[ 3.203461] gt683r_led 0003:1770:FF00.0001: hidraw0: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:14.0-7/input0
[ 3.222085] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 3.222122] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 3.232169] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[ 3.232176] psmouse serio1: synaptics: Your touchpad (PNP: SYN1509 SYN1500 SYN0002 PNP0f13 SYN1507) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 3.291794] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00323/0x840300/0x26800/0x0, board id: 3163, fw id: 2286728
[ 3.329881] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 3.418557] Bluetooth: Core ver 2.22
[ 3.418572] NET: Registered protocol family 31
[ 3.418573] Bluetooth: HCI device and connection manager initialized
[ 3.418575] Bluetooth: HCI socket layer initialized
[ 3.418577] Bluetooth: L2CAP socket layer initialized
[ 3.418579] Bluetooth: SCO socket layer initialized
[ 3.427004] usbcore: registered new interface driver btusb
[ 3.427397] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 3.428153] intel_rapl_common: Found RAPL domain package
[ 3.428155] intel_rapl_common: Found RAPL domain core
[ 3.428155] intel_rapl_common: Found RAPL domain uncore
[ 3.428156] intel_rapl_common: Found RAPL domain dram
[ 3.428157] intel_rapl_common: Found RAPL domain psys
[ 3.428386] Bluetooth: hci0: Device revision is 2
[ 3.428387] Bluetooth: hci0: Secure boot is enabled
[ 3.428387] Bluetooth: hci0: OTP lock is enabled
[ 3.428388] Bluetooth: hci0: API lock is enabled
[ 3.428388] Bluetooth: hci0: Debug lock is disabled
[ 3.428389] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 3.433294] Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
[ 3.445534] mousedev: PS/2 mouse device common for all mice
[ 3.697687] random: crng init done
[ 4.763705] NET: Registered protocol family 38
[ 4.790691] 8021q: 802.1Q VLAN Support v1.8
[ 4.858466] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.858467] Bluetooth: BNEP filters: protocol multicast
[ 4.858470] Bluetooth: BNEP socket layer initialized
[ 5.031676] Bluetooth: hci0: Waiting for firmware download to complete
[ 5.032417] Bluetooth: hci0: Firmware loaded in 1567786 usecs
[ 5.032431] Bluetooth: hci0: Waiting for device to boot
[ 5.046387] Bluetooth: hci0: Device booted in 13640 usecs
[ 5.046527] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[ 5.048423] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 5.051329] Bluetooth: hci0: Firmware revision 0.1 build 6 week 12 2021
[ 5.927817] wlan0: authenticate with 58:d7:59:84:3e:3c
[ 5.929606] wlan0: send auth to 58:d7:59:84:3e:3c (try 1/3)
[ 5.969355] wlan0: authenticated
[ 5.972961] kauditd_printk_skb: 37 callbacks suppressed
[ 5.972962] audit: type=1130 audit(1624965498.754:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=optimus-manager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.978100] wlan0: associate with 58:d7:59:84:3e:3c (try 1/3)
[ 5.982429] wlan0: RX AssocResp from 58:d7:59:84:3e:3c (capab=0x411 status=0 aid=13)
[ 5.987950] wlan0: associated
[ 5.996739] audit: type=1130 audit(1624965498.774:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=gdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.008198] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6.161060] audit: type=1130 audit(1624965498.944:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.163049] audit: type=1130 audit(1624965498.944:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=accounts-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.186180] audit: type=1100 audit(1624965498.964:52): pid=885 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_succeed_if,pam_permit acct="gdm" exe="/usr/lib/gdm-session-worker" hostname=archlinux addr=? terminal=/dev/tty1 res=success'
[ 6.186667] audit: type=1101 audit(1624965498.964:53): pid=885 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_succeed_if,pam_permit acct="gdm" exe="/usr/lib/gdm-session-worker" hostname=archlinux addr=? terminal=/dev/tty1 res=success'
[ 6.188633] audit: type=1103 audit(1624965498.974:54): pid=885 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit acct="gdm" exe="/usr/lib/gdm-session-worker" hostname=archlinux addr=? terminal=/dev/tty1 res=success'
[ 6.260149] audit: type=1006 audit(1624965499.044:55): pid=885 uid=0 old-auid=4294967295 auid=120 tty=(none) old-ses=4294967295 ses=1 res=1
[ 6.279171] audit: type=1130 audit(1624965499.064:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.298426] audit: type=1101 audit(1624965499.084:57): pid=890 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="gdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.759599] nvidia: loading out-of-tree module taints kernel.
[ 7.759605] nvidia: module license 'NVIDIA' taints kernel.
[ 7.759606] Disabling lock debugging due to kernel taint
[ 7.766331] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 7.778275] nvidia-nvlink: Nvlink Core is being initialized, major device number 235
[ 7.778730] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[ 7.778813] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[ 7.894946] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 465.31 Thu May 13 22:24:36 UTC 2021
[ 7.917026] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200925/nsarguments-61)
[ 11.234399] kauditd_printk_skb: 8 callbacks suppressed
[ 11.234400] audit: type=1334 audit(1624965504.014:66): prog-id=26 op=LOAD
[ 11.234493] audit: type=1334 audit(1624965504.014:67): prog-id=27 op=LOAD
[ 11.234581] audit: type=1334 audit(1624965504.014:68): prog-id=28 op=LOAD
[ 11.262230] audit: type=1130 audit(1624965504.044:69): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.376356] audit: type=1334 audit(1624965504.154:70): prog-id=29 op=LOAD
[ 11.376373] audit: type=1334 audit(1624965504.154:71): prog-id=30 op=LOAD
[ 11.445709] audit: type=1130 audit(1624965504.224:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.497276] audit: type=1130 audit(1624965504.274:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.499648] audit: type=1130 audit(1624965504.284:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.555790] rfkill: input handler disabled
[ 11.582343] audit: type=1130 audit(1624965504.364:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 36.071616] kauditd_printk_skb: 1 callbacks suppressed
[ 36.071618] audit: type=1105 audit(1624965529.468:77): pid=1304 uid=965 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_unix acct="gdm" exe="/usr/NX/bin/nxexec" hostname=? addr=? terminal=: res=success'
[ 41.769913] audit: type=1131 audit(1624965535.168:78): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 41.825350] audit: type=1131 audit(1624965535.218:79): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 42.038254] audit: type=1334 audit(1624965535.438:80): prog-id=28 op=UNLOAD
[ 42.038261] audit: type=1334 audit(1624965535.438:81): prog-id=27 op=UNLOAD
[ 42.038266] audit: type=1334 audit(1624965535.438:82): prog-id=26 op=UNLOAD
[ 42.278444] audit: type=1334 audit(1624965535.678:83): prog-id=24 op=UNLOAD
[ 42.278453] audit: type=1334 audit(1624965535.678:84): prog-id=23 op=UNLOAD
[ 42.278458] audit: type=1334 audit(1624965535.678:85): prog-id=22 op=UNLOAD
[ 72.063846] audit: type=1131 audit(1624965565.458:86): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 232.621888] audit: type=1100 audit(1624965726.017:87): pid=1481 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="matt" exe="/usr/lib/gdm-session-worker" hostname=archlinux addr=? terminal=/dev/tty1 res=success'
[ 232.623463] audit: type=1101 audit(1624965726.017:88): pid=1481 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="matt" exe="/usr/lib/gdm-session-worker" hostname=archlinux addr=? terminal=/dev/tty1 res=success'
[ 232.624206] audit: type=1103 audit(1624965726.017:89): pid=1481 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="matt" exe="/usr/lib/gdm-session-worker" hostname=archlinux addr=? terminal=/dev/tty1 res=success'
[ 232.634048] audit: type=1006 audit(1624965726.027:90): pid=1481 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[ 232.647555] audit: type=1130 audit(1624965726.037:91): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 232.654050] audit: type=1101 audit(1624965726.047:92): pid=1491 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="matt" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 232.654053] audit: type=1103 audit(1624965726.047:93): pid=1491 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="matt" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 232.654140] audit: type=1006 audit(1624965726.047:94): pid=1491 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
[ 232.656075] audit: type=1105 audit(1624965726.047:95): pid=1491 uid=0 auid=1000 ses=4 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="matt" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 232.662030] audit: type=1334 audit(1624965726.057:96): prog-id=31 op=LOAD
[ 233.071168] rfkill: input handler enabled
[ 235.896320] Bluetooth: RFCOMM TTY layer initialized
[ 235.896327] Bluetooth: RFCOMM socket layer initialized
[ 235.896330] Bluetooth: RFCOMM ver 1.11
[ 243.987422] kauditd_printk_skb: 3 callbacks suppressed
[ 243.987423] audit: type=1106 audit(1624965737.377:100): pid=885 uid=0 auid=120 ses=1 msg='op=PAM:session_close grantors=pam_loginuid,pam_keyinit,pam_succeed_if,pam_permit,pam_systemd,pam_env acct="gdm" exe="/usr/lib/gdm-session-worker" hostname=archlinux addr=? terminal=/dev/tty1 res=success'
[ 243.987470] audit: type=1104 audit(1624965737.377:101): pid=885 uid=0 auid=120 ses=1 msg='op=PAM:setcred grantors=pam_permit acct="gdm" exe="/usr/lib/gdm-session-worker" hostname=archlinux addr=? terminal=/dev/tty1 res=success'
[ 246.392599] audit: type=1106 audit(1624965739.787:102): pid=1304 uid=965 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix acct="gdm" exe="/usr/NX/bin/nxexec" hostname=? addr=? terminal=: res=success'
[ 246.437542] audit: type=1105 audit(1624965739.827:103): pid=1766 uid=965 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_unix acct="matt" exe="/usr/NX/bin/nxexec" hostname=? addr=? terminal=: res=success'
[ 254.258707] audit: type=1131 audit(1624965747.647:104): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 254.262816] audit: type=1131 audit(1624965747.657:105): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 454.132407] audit: type=1100 audit(1624965947.526:106): pid=3127 uid=1000 auid=1000 ses=3 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="matt" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 454.135455] audit: type=1101 audit(1624965947.526:107): pid=3127 uid=1000 auid=1000 ses=3 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="matt" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 454.137098] audit: type=1110 audit(1624965947.526:108): pid=3127 uid=1000 auid=1000 ses=3 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 454.141624] audit: type=1105 audit(1624965947.536:109): pid=3127 uid=1000 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'Here are all the outputs , I'll restart X11 and gonna keep you up-to-date
Offline
#7 2021-06-29 13:22:55
- sudobyter
- Member
- Registered: 2021-06-28
- Posts: 7
Re: Xorg not working
I ran this command to restart X11
systemctl restart display-managerthen,
optimus-manager --switch nvidiabut it didn't take effect
then,
I removed optimus-manager to try it out with nvidia-prime using this command
pacman -R optimus-managerthen I ran
prime-run baseamarkto test out the if it works and benchmark it , but still not working
And here is the output of
prime-run glxinfoname of display: :1
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 152 (GLX)
Minor opcode of failed request: 24 (X_GLXCreateNewContext)
Value in failed request: 0x0
Serial number of failed request: 50
Current serial number in output stream: 51plus when I ran
xrandr --listprovidersit doesn't show my nvidia gpu
only the integrated intel as it appears in the output
Providers: number : 1
Provider 0: id: 0x45 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 4 outputs: 2 associated providers: 0 name:IntelLast edited by sudobyter (2021-06-29 15:31:37)
Offline
#8 2021-06-29 15:38:58
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,527
Re: Xorg not working
The order is wrong. You need to switch, then restart X11.
But we'll ignore that for the moment.
What's the Xorg log after removing optimus-manager (and restarting X11)?
Updated "ls /{etc,usr/share}/X11/xorg.conf*"?
Does the GPU respond to nvidia-smi?
Offline
#9 2021-06-29 17:21:01
- sudobyter
- Member
- Registered: 2021-06-28
- Posts: 7
Re: Xorg not working
I redid the optimus-manager steps
still the same
the output of the .local/share/xorg/Xorg.0.log
[ 71.516] (--) Log file renamed from "/home/matt/.local/share/xorg/Xorg.pid-2275.log" to "/home/matt/.local/share/xorg/Xorg.0.log"
[ 71.516] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 71.516]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 71.516] Build Operating System: Linux Archlinux
[ 71.516] Current Operating System: Linux archlinux 5.10.46-1-lts #1 SMP Wed, 23 Jun 2021 16:18:42 +0000 x86_64
[ 71.516] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=b7650301-3f4c-40cf-919e-8984dfce7ac7 rw loglevel=3 quiet
[ 71.516] Build Date: 13 April 2021 03:12:10PM
[ 71.516]
[ 71.516] Current version of pixman: 0.40.0
[ 71.516] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 71.516] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 71.516] (==) Log file: "/home/matt/.local/share/xorg/Xorg.0.log", Time: Tue Jun 29 20:06:48 2021
[ 71.516] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 71.516] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 71.516] (==) No Layout section. Using the first Screen section.
[ 71.516] (==) No screen section available. Using defaults.
[ 71.516] (**) |-->Screen "Default Screen Section" (0)
[ 71.516] (**) | |-->Monitor "<default monitor>"
[ 71.516] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 71.516] (**) | |-->Device "integrated"
[ 71.516] (**) | |-->GPUDevice "Intel Graphics"
[ 71.516] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 71.516] (==) Automatically adding devices
[ 71.516] (==) Automatically enabling devices
[ 71.516] (==) Automatically adding GPU devices
[ 71.516] (==) Automatically binding GPU devices
[ 71.516] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 71.516] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 71.516] Entry deleted from font path.
[ 71.516] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 71.516] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 71.516] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 71.516] (II) Module ABI versions:
[ 71.516] X.Org ANSI C Emulation: 0.4
[ 71.516] X.Org Video Driver: 24.1
[ 71.516] X.Org XInput driver : 24.1
[ 71.516] X.Org Server Extension : 10.0
[ 71.517] (++) using VT number 3
[ 71.518] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_37
[ 71.518] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 71.519] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 71.520] (--) PCI:*(0@0:2:0) 8086:3e9b:1462:1223 rev 0, Mem @ 0xa2000000/16777216, 0x80000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 71.520] (--) PCI: (1@0:0:0) 10de:1c20:1462:1223 rev 161, Mem @ 0xa3000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 71.521] (II) Open ACPI successful (/var/run/acpid.socket)
[ 71.521] (II) LoadModule: "glx"
[ 71.521] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 71.522] (II) Module glx: vendor="X.Org Foundation"
[ 71.522] compiled for 1.20.11, module version = 1.0.0
[ 71.522] ABI class: X.Org Server Extension, version 10.0
[ 71.522] (II) LoadModule: "modesetting"
[ 71.522] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 71.522] (II) Module modesetting: vendor="X.Org Foundation"
[ 71.522] compiled for 1.20.11, module version = 1.20.11
[ 71.522] Module class: X.Org Video Driver
[ 71.522] ABI class: X.Org Video Driver, version 24.1
[ 71.522] (II) LoadModule: "intel"
[ 71.522] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 71.522] (II) Module intel: vendor="X.Org Foundation"
[ 71.522] compiled for 1.20.10, module version = 2.99.917
[ 71.522] Module class: X.Org Video Driver
[ 71.522] ABI class: X.Org Video Driver, version 24.1
[ 71.522] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 71.522] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 71.522] (II) intel: Driver for Intel(R) HD Graphics
[ 71.522] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 71.522] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 71.522] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 71.522] (II) modeset(0): using drv /dev/dri/card0
[ 71.522] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 71.522] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 71.522] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 71.522] (==) modeset(0): RGB weight 888
[ 71.522] (==) modeset(0): Default visual is TrueColor
[ 71.522] (II) Loading sub module "glamoregl"
[ 71.522] (II) LoadModule: "glamoregl"
[ 71.523] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 71.525] (II) Module glamoregl: vendor="X.Org Foundation"
[ 71.525] compiled for 1.20.11, module version = 1.0.1
[ 71.525] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.550] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics 630 (CFL GT2)
[ 71.550] (II) modeset(0): glamor initialized
[ 71.551] (II) modeset(0): Output eDP-1 has no monitor section
[ 71.552] (II) modeset(0): EDID for output eDP-1
[ 71.552] (II) modeset(0): Manufacturer: CMN Model: 15d6 Serial#: 0
[ 71.552] (II) modeset(0): Year: 2015 Week: 38
[ 71.552] (II) modeset(0): EDID Version: 1.4
[ 71.552] (II) modeset(0): Digital Display Input
[ 71.552] (II) modeset(0): 6 bits per channel
[ 71.552] (II) modeset(0): Digital interface is DisplayPort
[ 71.552] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 71.552] (II) modeset(0): Gamma: 2.20
[ 71.552] (II) modeset(0): No DPMS capabilities specified
[ 71.552] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 71.552] (II) modeset(0): First detailed timing is preferred mode
[ 71.552] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 71.552] (II) modeset(0): redX: 0.673 redY: 0.309 greenX: 0.266 greenY: 0.674
[ 71.552] (II) modeset(0): blueX: 0.156 blueY: 0.047 whiteX: 0.313 whiteY: 0.329
[ 71.552] (II) modeset(0): Manufacturer's mask: 0
[ 71.552] (II) modeset(0): Supported detailed timing:
[ 71.552] (II) modeset(0): clock: 152.8 MHz Image Size: 344 x 193 mm
[ 71.552] (II) modeset(0): h_active: 1920 h_sync: 1964 h_sync_end 1992 h_blank_end 2250 h_border: 0
[ 71.552] (II) modeset(0): v_active: 1080 v_sync: 1082 v_sync_end 1086 v_blanking: 1132 v_border: 0
[ 71.552] (II) modeset(0): N156HGA-EAL
[ 71.552] (II) modeset(0): CMN
[ 71.552] (II) modeset(0): N156HGA-EAL
[ 71.552] (II) modeset(0): EDID (in hex):
[ 71.552] (II) modeset(0): 00ffffffffffff000daed61500000000
[ 71.552] (II) modeset(0): 2619010495221378024205ac4f44ac28
[ 71.552] (II) modeset(0): 0c505400000001010101010101010101
[ 71.552] (II) modeset(0): 010101010101b43b804a713834402c1c
[ 71.552] (II) modeset(0): 240058c110000018000000fe004e3135
[ 71.552] (II) modeset(0): 364847412d45414c0a20000000fe0043
[ 71.552] (II) modeset(0): 4d4e0a202020202020202020000000fe
[ 71.552] (II) modeset(0): 004e3135364847412d45414c0a200073
[ 71.552] (II) modeset(0): Printing probed modes for output eDP-1
[ 71.552] (II) modeset(0): Modeline "1920x1080"x60.0 152.84 1920 1964 1992 2250 1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)
[ 71.552] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 71.552] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 71.552] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 71.552] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 71.552] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 71.552] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 71.552] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 71.552] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 71.552] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 71.552] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 71.552] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 71.552] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 71.552] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 71.552] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 71.552] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 71.552] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 71.552] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 71.552] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 71.552] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 71.552] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 71.552] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 71.552] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 71.552] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 71.552] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 71.552] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 71.552] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 71.552] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 71.552] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 71.552] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 71.552] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 71.552] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 71.552] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 71.552] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 71.552] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 71.552] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 71.552] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 71.552] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 71.552] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 71.552] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 71.552] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 71.552] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 71.552] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 71.552] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 71.552] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 71.552] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 71.552] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 71.552] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 71.552] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 71.552] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 71.552] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 71.552] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 71.552] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 71.552] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 71.552] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 71.552] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 71.552] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 71.552] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 71.552] (II) modeset(0): Output eDP-1 connected
[ 71.552] (II) modeset(0): Using exact sizes for initial modes
[ 71.552] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 71.552] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 71.552] (==) modeset(0): DPI set to (96, 96)
[ 71.552] (II) Loading sub module "fb"
[ 71.552] (II) LoadModule: "fb"
[ 71.552] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 71.552] (II) Module fb: vendor="X.Org Foundation"
[ 71.552] compiled for 1.20.11, module version = 1.0.0
[ 71.552] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.552] (II) UnloadModule: "intel"
[ 71.553] (II) Unloading intel
[ 71.561] (==) modeset(0): Backing store enabled
[ 71.562] (==) modeset(0): Silken mouse disabled
[ 71.642] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 71.642] (==) modeset(0): DPMS enabled
[ 71.642] (WW) modeset(0): Option "DRI" is not used
[ 71.642] (II) modeset(0): [DRI2] Setup complete
[ 71.642] (II) modeset(0): [DRI2] DRI driver: iris
[ 71.642] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 71.642] (II) Initializing extension Generic Event Extension
[ 71.642] (II) Initializing extension SHAPE
[ 71.642] (II) Initializing extension MIT-SHM
[ 71.642] (II) Initializing extension XInputExtension
[ 71.642] (II) Initializing extension XTEST
[ 71.642] (II) Initializing extension BIG-REQUESTS
[ 71.642] (II) Initializing extension SYNC
[ 71.642] (II) Initializing extension XKEYBOARD
[ 71.642] (II) Initializing extension XC-MISC
[ 71.642] (II) Initializing extension SECURITY
[ 71.642] (II) Initializing extension XFIXES
[ 71.642] (II) Initializing extension RENDER
[ 71.642] (II) Initializing extension RANDR
[ 71.642] (II) Initializing extension COMPOSITE
[ 71.642] (II) Initializing extension DAMAGE
[ 71.642] (II) Initializing extension MIT-SCREEN-SAVER
[ 71.642] (II) Initializing extension DOUBLE-BUFFER
[ 71.642] (II) Initializing extension RECORD
[ 71.642] (II) Initializing extension DPMS
[ 71.642] (II) Initializing extension Present
[ 71.642] (II) Initializing extension DRI3
[ 71.642] (II) Initializing extension X-Resource
[ 71.643] (II) Initializing extension XVideo
[ 71.643] (II) Initializing extension XVideo-MotionCompensation
[ 71.643] (II) Initializing extension GLX
[ 71.653] (II) AIGLX: Loaded and initialized iris
[ 71.653] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 71.653] (II) Initializing extension XFree86-VidModeExtension
[ 71.653] (II) Initializing extension XFree86-DGA
[ 71.653] (II) Initializing extension XFree86-DRI
[ 71.653] (II) Initializing extension DRI2
[ 71.653] (II) modeset(0): Damage tracking initialized
[ 71.653] (II) modeset(0): Setting screen physical size to 508 x 285
[ 71.716] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 71.716] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 71.716] (**) Power Button: Applying InputClass "system-keyboard"
[ 71.716] (II) LoadModule: "libinput"
[ 71.716] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 71.717] (II) Module libinput: vendor="X.Org Foundation"
[ 71.717] compiled for 1.20.11, module version = 1.1.0
[ 71.717] Module class: X.Org XInput Driver
[ 71.717] ABI class: X.Org XInput driver, version 24.1
[ 71.717] (II) Using input driver 'libinput' for 'Power Button'
[ 71.717] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 21 paused 0
[ 71.717] (**) Power Button: always reports core events
[ 71.717] (**) Option "Device" "/dev/input/event3"
[ 71.717] (**) Option "_source" "server/udev"
[ 71.719] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 71.719] (II) event3 - Power Button: device is a keyboard
[ 71.719] (II) event3 - Power Button: device removed
[ 71.719] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 71.719] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 71.719] (**) Option "xkb_layout" "us,ara"
[ 71.719] (**) Option "xkb_variant" ","
[ 71.734] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 71.734] (II) event3 - Power Button: device is a keyboard
[ 71.734] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 71.734] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 71.734] (**) Video Bus: Applying InputClass "system-keyboard"
[ 71.734] (II) Using input driver 'libinput' for 'Video Bus'
[ 71.735] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 24 paused 0
[ 71.735] (**) Video Bus: always reports core events
[ 71.735] (**) Option "Device" "/dev/input/event6"
[ 71.735] (**) Option "_source" "server/udev"
[ 71.735] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 71.735] (II) event6 - Video Bus: device is a keyboard
[ 71.735] (II) event6 - Video Bus: device removed
[ 71.735] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event6"
[ 71.735] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 71.735] (**) Option "xkb_layout" "us,ara"
[ 71.735] (**) Option "xkb_variant" ","
[ 71.736] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 71.736] (II) event6 - Video Bus: device is a keyboard
[ 71.736] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 71.737] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 71.737] (**) Video Bus: Applying InputClass "system-keyboard"
[ 71.737] (II) Using input driver 'libinput' for 'Video Bus'
[ 71.737] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 25 paused 0
[ 71.737] (**) Video Bus: always reports core events
[ 71.737] (**) Option "Device" "/dev/input/event7"
[ 71.737] (**) Option "_source" "server/udev"
[ 71.738] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 71.738] (II) event7 - Video Bus: device is a keyboard
[ 71.738] (II) event7 - Video Bus: device removed
[ 71.738] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input9/event7"
[ 71.738] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 71.738] (**) Option "xkb_layout" "us,ara"
[ 71.738] (**) Option "xkb_variant" ","
[ 71.739] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 71.739] (II) event7 - Video Bus: device is a keyboard
[ 71.739] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 71.739] (II) No input driver specified, ignoring this device.
[ 71.739] (II) This device may have been added with another device file.
[ 71.739] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 71.739] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 71.739] (**) Power Button: Applying InputClass "system-keyboard"
[ 71.739] (II) Using input driver 'libinput' for 'Power Button'
[ 71.740] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 26 paused 0
[ 71.740] (**) Power Button: always reports core events
[ 71.740] (**) Option "Device" "/dev/input/event2"
[ 71.740] (**) Option "_source" "server/udev"
[ 71.740] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 71.740] (II) event2 - Power Button: device is a keyboard
[ 71.741] (II) event2 - Power Button: device removed
[ 71.741] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 71.741] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 71.741] (**) Option "xkb_layout" "us,ara"
[ 71.741] (**) Option "xkb_variant" ","
[ 71.741] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 71.741] (II) event2 - Power Button: device is a keyboard
[ 71.742] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 71.742] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 71.742] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 71.742] (II) Using input driver 'libinput' for 'Sleep Button'
[ 71.742] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 27 paused 0
[ 71.742] (**) Sleep Button: always reports core events
[ 71.742] (**) Option "Device" "/dev/input/event1"
[ 71.742] (**) Option "_source" "server/udev"
[ 71.743] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 71.743] (II) event1 - Sleep Button: device is a keyboard
[ 71.743] (II) event1 - Sleep Button: device removed
[ 71.743] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 71.743] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 71.743] (**) Option "xkb_layout" "us,ara"
[ 71.743] (**) Option "xkb_variant" ","
[ 71.743] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 71.743] (II) event1 - Sleep Button: device is a keyboard
[ 71.744] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[ 71.744] (II) No input driver specified, ignoring this device.
[ 71.744] (II) This device may have been added with another device file.
[ 71.744] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[ 71.744] (II) No input driver specified, ignoring this device.
[ 71.744] (II) This device may have been added with another device file.
[ 71.744] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[ 71.744] (II) No input driver specified, ignoring this device.
[ 71.744] (II) This device may have been added with another device file.
[ 71.744] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 71.744] (II) No input driver specified, ignoring this device.
[ 71.744] (II) This device may have been added with another device file.
[ 71.745] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event12)
[ 71.745] (II) No input driver specified, ignoring this device.
[ 71.745] (II) This device may have been added with another device file.
[ 71.745] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[ 71.745] (II) No input driver specified, ignoring this device.
[ 71.745] (II) This device may have been added with another device file.
[ 71.745] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 71.745] (II) No input driver specified, ignoring this device.
[ 71.745] (II) This device may have been added with another device file.
[ 71.746] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 71.746] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 71.746] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 71.746] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 71.746] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 28 paused 0
[ 71.746] (**) AT Translated Set 2 keyboard: always reports core events
[ 71.746] (**) Option "Device" "/dev/input/event4"
[ 71.746] (**) Option "_source" "server/udev"
[ 71.747] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 71.747] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 71.747] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 71.747] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 71.747] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 71.747] (**) Option "xkb_layout" "us,ara"
[ 71.747] (**) Option "xkb_variant" ","
[ 71.748] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 71.748] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 71.749] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
[ 71.749] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 71.749] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[ 71.749] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 71.749] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 29 paused 0
[ 71.749] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 71.749] (**) Option "Device" "/dev/input/event16"
[ 71.749] (**) Option "_source" "server/udev"
[ 71.750] (II) event16 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 71.750] (II) event16 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 71.751] (II) event16 - SynPS/2 Synaptics TouchPad: device removed
[ 71.751] (**) Option "Tapping" "on"
[ 71.751] (**) Option "TappingButtonMap" "lrm"
[ 71.751] (**) Option "ScrollMethod" "twofinger"
[ 71.751] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event16"
[ 71.751] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 71.751] (**) Option "AccelerationScheme" "none"
[ 71.751] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 71.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 71.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 71.752] (II) event16 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 71.752] (II) event16 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 71.753] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 71.753] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[ 71.753] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 71.753] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 71.753] (**) Option "Device" "/dev/input/mouse0"
[ 71.753] (**) Option "_source" "server/udev"
[ 71.753] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse0
Permission denied.
[ 71.753] (II) mouse0: opening input device '/dev/input/mouse0' failed (Permission denied).
[ 71.753] (II) mouse0 - failed to create input device '/dev/input/mouse0'.
[ 71.753] (EE) libinput: SynPS/2 Synaptics TouchPad: Failed to create a device for /dev/input/mouse0
[ 71.753] (EE) PreInit returned 2 for "SynPS/2 Synaptics TouchPad"
[ 71.753] (II) UnloadModule: "libinput"
[ 71.753] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 71.753] (II) No input driver specified, ignoring this device.
[ 71.753] (II) This device may have been added with another device file.
[ 71.755] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event13)
[ 71.755] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 71.755] (**) MSI WMI hotkeys: Applying InputClass "system-keyboard"
[ 71.755] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[ 71.755] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 30 paused 0
[ 71.755] (**) MSI WMI hotkeys: always reports core events
[ 71.755] (**) Option "Device" "/dev/input/event13"
[ 71.755] (**) Option "_source" "server/udev"
[ 71.755] (II) event13 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 71.756] (II) event13 - MSI WMI hotkeys: device is a keyboard
[ 71.756] (II) event13 - MSI WMI hotkeys: device removed
[ 71.756] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event13"
[ 71.756] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 13)
[ 71.756] (**) Option "xkb_layout" "us,ara"
[ 71.756] (**) Option "xkb_variant" ","
[ 71.756] (II) event13 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 71.756] (II) event13 - MSI WMI hotkeys: device is a keyboard
[ 125.780] (**) Option "fd" "21"
[ 125.780] (II) event3 - Power Button: device removed
[ 125.780] (**) Option "fd" "24"
[ 125.780] (II) event6 - Video Bus: device removed
[ 125.780] (**) Option "fd" "25"
[ 125.780] (II) event7 - Video Bus: device removed
[ 125.780] (**) Option "fd" "26"
[ 125.780] (II) event2 - Power Button: device removed
[ 125.780] (**) Option "fd" "27"
[ 125.780] (II) event1 - Sleep Button: device removed
[ 125.780] (**) Option "fd" "28"
[ 125.780] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 125.780] (**) Option "fd" "29"
[ 125.780] (II) event16 - SynPS/2 Synaptics TouchPad: device removed
[ 125.781] (**) Option "fd" "30"
[ 125.781] (II) event13 - MSI WMI hotkeys: device removed
[ 125.793] (II) UnloadModule: "libinput"
[ 125.793] (II) systemd-logind: releasing fd for 13:77
[ 125.959] (II) UnloadModule: "libinput"
[ 125.959] (II) systemd-logind: releasing fd for 13:80
[ 126.149] (II) UnloadModule: "libinput"
[ 126.149] (II) systemd-logind: releasing fd for 13:68
[ 126.219] (II) UnloadModule: "libinput"
[ 126.219] (II) systemd-logind: releasing fd for 13:65
[ 126.290] (II) UnloadModule: "libinput"
[ 126.290] (II) systemd-logind: releasing fd for 13:66
[ 126.350] (II) UnloadModule: "libinput"
[ 126.350] (II) systemd-logind: releasing fd for 13:71
[ 126.399] (II) UnloadModule: "libinput"
[ 126.400] (II) systemd-logind: releasing fd for 13:70
[ 126.460] (II) UnloadModule: "libinput"
[ 126.460] (II) systemd-logind: releasing fd for 13:67
[ 126.533] (II) Server terminated successfully (0). Closing log file.and it's not responding to nvidia-smi
the output for
ls /{etc,usr/share}/X11/xorg.conf*/etc/X11/xorg.conf.backup
/etc/X11/xorg.conf.d:
00-keyboard.conf
10-nvidia-drm-outputclass.conf
10-optimus-manager.conf
20-intel.conf
90-touchpad.conf
/usr/share/X11/xorg.conf.d:
10-nvidia-drm-outputclass.conf
10-quirks.conf
40-libinput.confIn addition, I noticed this in logs
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card supportis it relevant to the problem ?
when doing
xrandr --listprovidersit gives me like this :
Providers: number : 1
Provider 0: id: 0x43 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 1 associated providers: 0 name:modesettingLast edited by sudobyter (2021-06-29 18:01:38)
Offline
#10 2021-06-29 21:00:58
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,527
Re: Xorg not working
I assume you purged optimus-manager? Remove the 10-optimus-manager.conf as well.
it's not responding to nvidia-smi
That's bad. To be sure: the nvidi-smi output in the first post *is* response.
Otherwise:
nvidia-smi -LOffline
#11 2021-06-29 22:01:03
- sudobyter
- Member
- Registered: 2021-06-28
- Posts: 7
Re: Xorg not working
Alright we got somthing from
nvidia-smi -L GPU 0: NVIDIA GeForce GTX 1060 (UUID: GPU-0e119248-1b9b-56ce-19fd-7b975fff1dc3)And I deleted the optimus conf
Oh sorry I've been mistaken I thought you saying is it still off ?
well yes it's
Every 2.0s: nvidia-smi archlinux: Wed Jun 30 01:13:31 2021
Wed Jun 30 01:13:31 2021
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 465.31 Driver Version: 465.31 CUDA Version: 11.3 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|===============================+======================+======================|
| 0 NVIDIA GeForce ... Off | 00000000:01:00.0 Off | N/A |
| N/A 52C P0 24W / N/A | 0MiB / 6078MiB | 2% Default |
| | | N/A |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=============================================================================|
| No running processes found |
+-----------------------------------------------------------------------------+Last edited by sudobyter (2021-06-29 22:19:53)
Offline
#12 2021-06-30 07:11:48
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,527
Re: Xorg not working
The GPU is there and responds, try https://wiki.archlinux.org/title/NVIDIA … de_setting (kernel parameter AND adding the modules to the initramfs, you also want to add i915, https://wiki.archlinux.org/title/Kernel … _KMS_start )
Offline
Pages: 1