You are not logged in.
Pages: 1
I set up arch via netboot, having jack2 and alsa-tools installed, pa inkl. equalizer, too, no HDMI output, driver intel_hd, whatta do?
lspci:
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
did work from the beginning on, since playing around, HDMI from screen is dead!
bt: no prob.!
pavucontrol: no cards available for play!
sudo dmesg | grep audio:
[ 19.255184] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 19.835788] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 19.835797] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 19.835800] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 19.835803] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 19.835805] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 19.835807] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 19.835809] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 19.835811] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 19.835813] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 20.075367] usbcore: registered new interface driver snd-usb-audio
any help appreciated!
lizbeth
Last edited by mutterhunt (2021-08-17 18:04:44)
Offline
nobody? once someone was very helpful, but now?
:-(
deluded lizbeth
Offline
Please review our forum guidelines. Specifically the "no bumping" and the use of code tags (and I'll leave aside the suspicion of multiple accounts based on "once someone was ..." when this is your first thread here). However, even more directly relevant to you getting the help you seek, see the second bullet in "how to post". I can't make much sense of most of your post.
Are you saying sound worked at one point, but stopped after your "played around"? What did you "play around" with? What's the output of `aplay -L`? What are the symptoms of "not working": does `speaker-test` work? Does `aplay` work?
"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" - Richard Stallman
Offline
As mentioned you need to provide more information about what you did and how you're determining you card got "lost" post your
aplay -lL
#If pulse set up
pacmd list-cards
pacmd list-sinks
in
[code]code tags[/code]
Moving to NC...
Offline
sorry for late reply and yes I already had an account here and doing Arch for a long time!
Linux thinks it is a BIOS bug, as the kernel boot writes with dmesg:
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.S
PT2._GTF.DSSP], AE_NOT_FOUND (20210604/psargs-330)
Debian doesn't do this, btw! I built the kernel myself as I saw this, but no change!
except "enable sound" there are no BIOS settings concerning card...
what do you think? is it possible that this is why my hackintosh doesn't do any sound at all?
aplay -lL isn't possible; I simply can't find the package containing it in arch linux.
lizbeth
Last edited by mutterhunt (2021-08-17 17:52:24)
Offline
ACPI errors are normal and unlikely to be related to whatever your issue is.
aplay is part of alsa-utils: https://wiki.archlinux.org/title/Pacman … cific_file
Offline
sudo aplay -lL
[sudo] password for lizbeth:
ALSA lib conf.c:4042:(config_file_open) cannot access file /etc/alsa/conf.d/99-pulseaudio-default.conf
ALSA lib conf.c:3962:(snd_config_hooks_call) function snd_config_hook_load returned error: No such file or directory
ALSA lib conf.c:4569:(snd_config_update_r) hooks failed, removing configuration
**** List of PLAYBACK Hardware Devices ****
ALSA lib conf.c:4042:(config_file_open) cannot access file /etc/alsa/conf.d/99-pulseaudio-default.conf
ALSA lib conf.c:3962:(snd_config_hooks_call) function snd_config_hook_load returned error: No such file or directory
ALSA lib conf.c:4569:(snd_config_update_r) hooks failed, removing configuration
aplay: device_list:283: control open (0): No such file or directory
ALSA lib conf.c:4042:(config_file_open) cannot access file /etc/alsa/conf.d/99-pulseaudio-default.conf
ALSA lib conf.c:3962:(snd_config_hooks_call) function snd_config_hook_load returned error: No such file or directory
ALSA lib conf.c:4569:(snd_config_update_r) hooks failed, removing configuration
aplay: device_list:283: control open (1): No such file or directory
sudo pacmd list-cards
No PulseAudio daemon running, or not running as session daemon.
[lizbeth@archcurrent mnt]$ sudo systemctl enable --now pulseaudio
Failed to enable unit: Unit file pulseaudio.service does not exist.
[lizbeth@archcurrent mnt]$ sudo systemctl enable --now pulseaudiod
Failed to enable unit: Unit file pulseaudiod.service does not exist.
[lizbeth@archcurrent mnt]$ pulseaudio
E: [pulseaudio] pid.c: Daemon already running.
E: [pulseaudio] main.c: pa_pid_file_create() failed.
[lizbeth@archcurrent mnt]$ pacmd list-cards
0 card(s) available.
Offline
no one said to run these as root. But the fact that you get this kind of output means you broke your ALSA config in some way.
printenv
ls -l /etc/alsa/conf.d /usr/share/alsa/alsa.conf.d
cat /etc/asound.conf
cat ~/.asoundrc
cat /usr/share/alsa/alsa.conf
cat /usr/share/alsa/alsa.conf.d/99-pulseaudio-default.conf
pacman -Qkk alsa-lib pulseaudio-alsa
Offline
take the sudo command carefully, it's said, but when in the /home/ folder the <.> and <..> permissions are root, you will never get k running following up the sddm, gdm, lightdm, slim, xterm, startx whatever....
printenv gives back a lot:
SHELL=/bin/bash
SESSION_MANAGER=local/archcurrent:@/tmp/.ICE-unix/1183,unix/archcurrent:/tmp/.ICE-unix/1183
WINDOWID=48234499
COLORTERM=truecolor
XDG_CONFIG_DIRS=/home/lizbeth/.config/kdedefaults:/etc/xdg
XDG_SESSION_PATH=/org/freedesktop/DisplayManager/Session1
LANGUAGE=nl:en_US
DESKTOP_SESSION=plasma
GTK_RC_FILES=/etc/gtk/gtkrc:/home/lizbeth/.gtkrc:/home/lizbeth/.config/gtkrc
XCURSOR_SIZE=24
GTK_MODULES=canberra-gtk-module
XDG_SEAT=seat0
PWD=/
LOGNAME=lizbeth
XDG_SESSION_DESKTOP=KDE
XDG_SESSION_TYPE=x11
SYSTEMD_EXEC_PID=1101
XAUTHORITY=/home/lizbeth/.Xauthority
MOTD_SHOWN=pam
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/lizbeth/.gtkrc-2.0:/home/lizbeth/.config/gtkrc-2.0
HOME=/home/lizbeth
LANG=C
XDG_CURRENT_DESKTOP=KDE
VTE_VERSION=6402
XDG_SEAT_PATH=/org/freedesktop/DisplayManager/Seat0
KDE_SESSION_UID=1000
XDG_SESSION_CLASS=user
TERM=xterm-256color
USER=lizbeth
KDE_SESSION_VERSION=5
PAM_KWALLET5_LOGIN=/run/user/1000/kwallet5.socket
DISPLAY=:0
SHLVL=1
XDG_VTNR=1
XDG_SESSION_ID=2
XDG_RUNTIME_DIR=/run/user/1000
QT_AUTO_SCREEN_SCALE_FACTOR=0
XCURSOR_THEME=volantes_light_cursors
XDG_DATA_DIRS=/home/lizbeth/.local/share/flatpak/exports/share:/var/lib/flatpak/exports/share:/usr/local/share:/usr/share:/var/lib/snapd/desktop
KDE_FULL_SESSION=true
PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/var/lib/flatpak/exports/bin:/opt/nessus/bin:/opt/nessus/sbin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl:/var/lib/snapd/snap/bin
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
KDE_APPLICATIONS_AS_SCOPE=1
MAIL=/var/spool/mail/lizbeth
_=/usr/bin/printenv
ls -l /etc/alsa/conf.d /usr/share/alsa/alsa.conf.d
/etc/alsa/conf.d:
total 0
lrwxrwxrwx 1 root root 54 Jun 3 23:10 99-pulseaudio-default.conf -> /usr/share/alsa/alsa.conf.d/99-pulseaudio-default.conf
/usr/share/alsa/alsa.conf.d:
total 8
-rw-r--r-- 1 root root 1031 Aug 5 18:06 50-pipewire.conf
-rw-r--r-- 1 root root 226 Aug 5 18:06 99-pipewire-default.conf
cat /etc/asound.conf
cat: /etc/asound.conf: No such file or directory
cat ~/.asoundrc
cat: /home/lizbeth/.asoundrc: No such file or directory
cat /usr/share/alsa/alsa.conf:
#
# ALSA library configuration file
#
# pre-load the configuration files
@hooks [
{
func load
files [
"/var/lib/alsa/conf.d"
"/usr/etc/alsa/conf.d"
"/etc/alsa/conf.d"
"/etc/asound.conf|||/usr/etc/asound.conf"
"~/.asoundrc"
{
@func concat
strings [
{
@func getenv
vars [
XDG_CONFIG_HOME
]
default "~/.config"
}
"/alsa/asoundrc"
]
}
]
errors false
}
]
# load card-specific configuration files (on request)
cards.@hooks [
{
func load
files [
{
@func concat
strings [
{ @func datadir }
"/cards/aliases.conf"
]
}
]
}
{
func load_for_all_cards
files [
{
@func concat
strings [
{ @func datadir }
"/cards/"
{ @func private_string }
".conf"
]
}
{
root {
@func private_integer
}
file {
@func concat
strings [
"/var/lib/alsa/card"
{ @func private_integer }
".conf.d"
]
}
}
]
table {
id {
@func concat
strings [
{ @func private_integer }
]
}
value {
@func concat
strings [
"cards."
{ @func private_string }
]
}
}
errors false
}
]
#
# defaults
#
# show all name hints also for definitions without hint {} section
defaults.namehint.showall off
# show just basic name hints
defaults.namehint.basic on
# show extended name hints
defaults.namehint.extended off
#
defaults.ctl.card 0
defaults.pcm.card 0
defaults.pcm.device 0
defaults.pcm.subdevice -1
defaults.pcm.nonblock 1
defaults.pcm.compat 0
defaults.pcm.minperiodtime 5000 # in us
defaults.pcm.ipc_key 5678293
defaults.pcm.ipc_gid audio
defaults.pcm.ipc_perm 0660
defaults.pcm.tstamp_type default
defaults.pcm.dmix.max_periods 0
defaults.pcm.dmix.channels 2
defaults.pcm.dmix.rate 48000
defaults.pcm.dmix.format unchanged
defaults.pcm.dmix.card defaults.pcm.card
defaults.pcm.dmix.device defaults.pcm.device
defaults.pcm.dsnoop.card defaults.pcm.card
defaults.pcm.dsnoop.device defaults.pcm.device
defaults.pcm.front.card defaults.pcm.card
defaults.pcm.front.device defaults.pcm.device
defaults.pcm.rear.card defaults.pcm.card
defaults.pcm.rear.device defaults.pcm.device
defaults.pcm.center_lfe.card defaults.pcm.card
defaults.pcm.center_lfe.device defaults.pcm.device
defaults.pcm.side.card defaults.pcm.card
defaults.pcm.side.device defaults.pcm.device
defaults.pcm.surround21.card defaults.pcm.card
defaults.pcm.surround21.device defaults.pcm.device
defaults.pcm.surround40.card defaults.pcm.card
defaults.pcm.surround40.device defaults.pcm.device
defaults.pcm.surround41.card defaults.pcm.card
defaults.pcm.surround41.device defaults.pcm.device
defaults.pcm.surround50.card defaults.pcm.card
defaults.pcm.surround50.device defaults.pcm.device
defaults.pcm.surround51.card defaults.pcm.card
defaults.pcm.surround51.device defaults.pcm.device
defaults.pcm.surround71.card defaults.pcm.card
defaults.pcm.surround71.device defaults.pcm.device
defaults.pcm.iec958.card defaults.pcm.card
defaults.pcm.iec958.device defaults.pcm.device
defaults.pcm.modem.card defaults.pcm.card
defaults.pcm.modem.device defaults.pcm.device
defaults.pcm.file_format raw
defaults.pcm.file_truncate true # truncate files via file or tee PCM
defaults.rawmidi.card 0
defaults.rawmidi.device 0
defaults.rawmidi.subdevice -1
defaults.hwdep.card 0
defaults.hwdep.device 0
defaults.timer.class 2
defaults.timer.sclass 0
defaults.timer.card 0
defaults.timer.device 0
defaults.timer.subdevice 0
#
# PCM interface
#
pcm.hw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_PCM_CARD
ALSA_CARD
]
default {
@func refer
name defaults.pcm.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_PCM_DEVICE
]
default {
@func refer
name defaults.pcm.device
}
}
}
@args.SUBDEV {
type integer
default {
@func refer
name defaults.pcm.subdevice
}
}
type hw
card $CARD
device $DEV
subdevice $SUBDEV
hint {
show {
@func refer
name defaults.namehint.extended
}
description "Direct hardware device without any conversions"
}
}
pcm.plughw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_PCM_CARD
ALSA_CARD
]
default {
@func refer
name defaults.pcm.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_PCM_DEVICE
]
default {
@func refer
name defaults.pcm.device
}
}
}
@args.SUBDEV {
type integer
default {
@func refer
name defaults.pcm.subdevice
}
}
type plug
slave.pcm {
type hw
card $CARD
device $DEV
subdevice $SUBDEV
}
hint {
show {
@func refer
name defaults.namehint.extended
}
description "Hardware device with all software conversions"
}
}
pcm.plug {
@args [ SLAVE ]
@args.SLAVE {
type string
}
type plug
slave.pcm $SLAVE
}
pcm.shm {
@args [ SOCKET PCM ]
@args.SOCKET {
type string
}
@args.PCM {
type string
}
type shm
server $SOCKET
pcm $PCM
}
pcm.tee {
@args [ SLAVE FILE FORMAT ]
@args.SLAVE {
type string
}
@args.FILE {
type string
}
@args.FORMAT {
type string
default {
@func refer
name defaults.pcm.file_format
}
}
type file
slave.pcm $SLAVE
file $FILE
format $FORMAT
truncate {
@func refer
name defaults.pcm.file_truncate
}
}
pcm.file {
@args [ FILE FORMAT ]
@args.FILE {
type string
}
@args.FORMAT {
type string
default {
@func refer
name defaults.pcm.file_format
}
}
type file
slave.pcm null
file $FILE
format $FORMAT
truncate {
@func refer
name defaults.pcm.file_truncate
}
}
pcm.null {
type null
hint {
show {
@func refer
name defaults.namehint.basic
}
description "Discard all samples (playback) or generate zero samples (capture)"
}
}
# redirect to load-on-demand extended pcm definitions
pcm.cards cards.pcm
pcm.default cards.pcm.default
pcm.sysdefault cards.pcm.default
pcm.front cards.pcm.front
pcm.rear cards.pcm.rear
pcm.center_lfe cards.pcm.center_lfe
pcm.side cards.pcm.side
pcm.surround21 cards.pcm.surround21
pcm.surround40 cards.pcm.surround40
pcm.surround41 cards.pcm.surround41
pcm.surround50 cards.pcm.surround50
pcm.surround51 cards.pcm.surround51
pcm.surround71 cards.pcm.surround71
pcm.iec958 cards.pcm.iec958
pcm.spdif iec958
pcm.hdmi cards.pcm.hdmi
pcm.dmix cards.pcm.dmix
pcm.dsnoop cards.pcm.dsnoop
pcm.modem cards.pcm.modem
pcm.phoneline cards.pcm.phoneline
#
# Control interface
#
ctl.default cards.ctl.default
ctl.sysdefault cards.ctl.default
ctl.hw {
@args [ CARD ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_CTL_CARD
ALSA_CARD
]
default {
@func refer
name defaults.ctl.card
}
}
}
type hw
card $CARD
hint.description "Direct control device"
}
ctl.shm {
@args [ SOCKET CTL ]
@args.SOCKET {
type string
}
@args.CTL {
type string
}
type shm
server $SOCKET
ctl $CTL
}
#
# RawMidi interface
#
rawmidi.default {
type hw
card {
@func getenv
vars [
ALSA_RAWMIDI_CARD
ALSA_CARD
]
default {
@func refer
name defaults.rawmidi.card
}
}
device {
@func igetenv
vars [
ALSA_RAWMIDI_DEVICE
]
default {
@func refer
name defaults.rawmidi.device
}
}
hint.description "Default raw MIDI device"
}
rawmidi.hw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_RAWMIDI_CARD
ALSA_CARD
]
default {
@func refer
name defaults.rawmidi.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_RAWMIDI_DEVICE
]
default {
@func refer
name defaults.rawmidi.device
}
}
}
@args.SUBDEV {
type integer
default -1
}
type hw
card $CARD
device $DEV
subdevice $SUBDEV
hint {
description "Direct rawmidi driver device"
device $DEV
}
}
rawmidi.virtual {
@args [ MERGE ]
@args.MERGE {
type string
default 1
}
type virtual
merge $MERGE
}
#
# Sequencer interface
#
seq.default {
type hw
hint.description "Default sequencer device"
}
seq.hw {
type hw
}
#
# HwDep interface
#
hwdep.default {
type hw
card {
@func getenv
vars [
ALSA_HWDEP_CARD
ALSA_CARD
]
default {
@func refer
name defaults.hwdep.card
}
}
device {
@func igetenv
vars [
ALSA_HWDEP_DEVICE
]
default {
@func refer
name defaults.hwdep.device
}
}
hint.description "Default hardware dependent device"
}
hwdep.hw {
@args [ CARD DEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_HWDEP_CARD
ALSA_CARD
]
default {
@func refer
name defaults.hwdep.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_HWDEP_DEVICE
]
default {
@func refer
name defaults.hwdep.device
}
}
}
type hw
card $CARD
device $DEV
hint {
description "Direct hardware dependent device"
device $DEV
}
}
#
# Timer interface
#
timer_query.default {
type hw
}
timer_query.hw {
type hw
}
timer.default {
type hw
class {
@func refer
name defaults.timer.class
}
sclass {
@func refer
name defaults.timer.sclass
}
card {
@func refer
name defaults.timer.card
}
device {
@func refer
name defaults.timer.device
}
subdevice {
@func refer
name defaults.timer.subdevice
}
hint.description "Default timer device"
}
timer.hw {
@args [ CLASS SCLASS CARD DEV SUBDEV ]
@args.CLASS {
type integer
default {
@func refer
name defaults.timer.class
}
}
@args.SCLASS {
type integer
default {
@func refer
name defaults.timer.sclass
}
}
@args.CARD {
type string
default {
@func refer
name defaults.timer.card
}
}
@args.DEV {
type integer
default {
@func refer
name defaults.timer.device
}
}
@args.SUBDEV {
type integer
default {
@func refer
name defaults.timer.subdevice
}
}
type hw
class $CLASS
sclass $SCLASS
card $CARD
device $DEV
subdevice $SUBDEV
hint {
description "Direct timer device"
device $DEV
}
}
cat /usr/share/alsa/alsa.conf.d/99-pulseaudio-default.conf
cat: /usr/share/alsa/alsa.conf.d/99-pulseaudio-default.conf: No such file or directory
pacman -Qkk alsa-lib pulseaudio-alsa
alsa-lib: 159 total files, 0 altered files
pulseaudio-alsa: 4 total files, 0 altered files
have been looking for the 99-config file sample, not found anything appropriete, debian has no sound either, the only one laughing on that point of view is FreeBSD, bringing it's output on HDMI screen speaker, but there no A2DP or BT at all.
trying to fix it in the OsX at the moment, there was the beginning of this symptom.
lizbeth
Offline
There's a bunch of stuff that's simply completely broken here, I'm not sure what exactly you tried to fix how and why.
Reinstall alsa-plugins to restore the proper symlink files, that "should" fix aplay, post aplay -lL again.
Offline
look, did a
pacman -Rnd alsa-utils
and a
git clone [url]https://aur.archlinux.org/alsa-utils-git[/url],
and makepkg -si as a simple user;
many compile-failures but still the same output at aplay -lL.
are there any sample configuration files somewhere under /usr/share/doc/* or simply the man with examples?
a bit as mac doesn't know further, FreeBSD has the output of the HDMI screen speakers on the pcm6....
lizbeth
P.S.: a new sound-card or better output on some old-cabled speakers, amplifiers?
Last edited by mutterhunt (2021-08-20 17:09:29)
Offline
please read what I'm posting attentively, I didn't tell you to do anything with alsa-utils but install the alsa-plugins package as currently all configuration that would be setup by it is broken on your system.
Offline
ahhh.... good to be here in a newbie forum after 30 years of unix, alsa-plugins not alsa-utils, I force to overwrite. Will be done this evening.
Offline
aplay -lL
aplay -lL
null
Discard all samples (playback) or generate zero samples (capture)
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
default:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
sysdefault:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Front output / input
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
usbstream:CARD=PCH
HDA Intel PCH
USB Stream Output
usbstream:CARD=C170
Webcam C170
USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
pacmd list-cards
pacmd list-cards
0 card(s) available.
pacmd list-sinks
3 sink(s) available.
index: 0
name: <null>
driver: <module-null-sink.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1000
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 344 KiB
max rewind: 344 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
module: 8
properties:
device.description = "Null Output"
device.class = "abstract"
device.icon_name = "audio-card"
* index: 1
name: <fifo_output>
driver: <module-pipe-sink.c>
flags: DECIBEL_VOLUME LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 0
volume: front-left: 52429 / 80% / -5.81 dB, front-right: 52429 / 80% / -5.81 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 4 KiB
max rewind: 0 KiB
monitor source: 1
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 23.22 ms
module: 9
properties:
device.string = "/run/user/1000/pulse/fifo_output"
device.description = "Unix FIFO sink /run/user/1000/pulse/fifo_output"
device.icon_name = "audio-card"
index: 2
name: <combined>
driver: <module-combine-sink.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 1000
volume: front-left: 49149 / 75% / -7.50 dB, front-right: 49149 / 75% / -7.50 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 16.76 ms
max request: 34 KiB
max rewind: 0 KiB
monitor source: 2
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 75.01 ms; range is 0.50 .. 200.00 ms
module: 21
properties:
device.class = "filter"
device.description = "Simultaneous Output"
device.icon_name = "audio-card"
cat /usr/share/alsa/alsa.conf.d/99-pulseaudio-default.conf
# Default to PulseAudio
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
}
}
ctl.!default {
type pulse
fallback "sysdefault"
}
[lizbeth@archcurrent mnt]$ cat /usr/share/alsa/alsa.conf
# ALSA library configuration file
#
# pre-load the configuration files
@hooks [
{
func load
files [
"/var/lib/alsa/conf.d"
"/usr/etc/alsa/conf.d"
"/etc/alsa/conf.d"
"/etc/asound.conf|||/usr/etc/asound.conf"
"~/.asoundrc"
{
@func concat
strings [
{
@func getenv
vars [
XDG_CONFIG_HOME
]
default "~/.config"
}
"/alsa/asoundrc"
]
}
]
errors false
}
]
# load card-specific configuration files (on request)
cards.@hooks [
{
func load
files [
{
@func concat
strings [
{ @func datadir }
"/cards/aliases.conf"
]
}
]
}
{
func load_for_all_cards
files [
{
@func concat
strings [
{ @func datadir }
"/cards/"
{ @func private_string }
".conf"
]
}
{
root {
@func private_integer
}
file {
@func concat
strings [
"/var/lib/alsa/card"
{ @func private_integer }
".conf.d"
]
}
}
]
table {
id {
@func concat
strings [
{ @func private_integer }
]
}
value {
@func concat
strings [
"cards."
{ @func private_string }
]
}
}
errors false
}
]
#
# defaults
#
# show all name hints also for definitions without hint {} section
defaults.namehint.showall off
# show just basic name hints
defaults.namehint.basic on
# show extended name hints
defaults.namehint.extended off
#
defaults.ctl.card 0
defaults.pcm.card 0
defaults.pcm.device 0
defaults.pcm.subdevice -1
defaults.pcm.nonblock 1
defaults.pcm.compat 0
defaults.pcm.minperiodtime 5000 # in us
defaults.pcm.ipc_key 5678293
defaults.pcm.ipc_gid audio
defaults.pcm.ipc_perm 0660
defaults.pcm.tstamp_type default
defaults.pcm.dmix.max_periods 0
defaults.pcm.dmix.channels 2
defaults.pcm.dmix.rate 48000
defaults.pcm.dmix.format unchanged
defaults.pcm.dmix.card defaults.pcm.card
defaults.pcm.dmix.device defaults.pcm.device
defaults.pcm.dsnoop.card defaults.pcm.card
defaults.pcm.dsnoop.device defaults.pcm.device
defaults.pcm.front.card defaults.pcm.card
defaults.pcm.front.device defaults.pcm.device
defaults.pcm.rear.card defaults.pcm.card
defaults.pcm.rear.device defaults.pcm.device
defaults.pcm.center_lfe.card defaults.pcm.card
defaults.pcm.center_lfe.device defaults.pcm.device
defaults.pcm.side.card defaults.pcm.card
defaults.pcm.side.device defaults.pcm.device
defaults.pcm.surround21.card defaults.pcm.card
defaults.pcm.surround21.device defaults.pcm.device
defaults.pcm.surround40.card defaults.pcm.card
defaults.pcm.surround40.device defaults.pcm.device
defaults.pcm.surround41.card defaults.pcm.card
defaults.pcm.surround41.device defaults.pcm.device
defaults.pcm.surround50.card defaults.pcm.card
defaults.pcm.surround50.device defaults.pcm.device
defaults.pcm.surround51.card defaults.pcm.card
defaults.pcm.surround51.device defaults.pcm.device
defaults.pcm.surround71.card defaults.pcm.card
defaults.pcm.surround71.device defaults.pcm.device
defaults.pcm.iec958.card defaults.pcm.card
defaults.pcm.iec958.device defaults.pcm.device
defaults.pcm.modem.card defaults.pcm.card
defaults.pcm.modem.device defaults.pcm.device
defaults.pcm.file_format raw
defaults.pcm.file_truncate true # truncate files via file or tee PCM
defaults.rawmidi.card 0
defaults.rawmidi.device 0
defaults.rawmidi.subdevice -1
defaults.hwdep.card 0
defaults.hwdep.device 0
defaults.timer.class 2
defaults.timer.sclass 0
defaults.timer.card 0
defaults.timer.device 0
defaults.timer.subdevice 0
#
# PCM interface
#
pcm.hw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_PCM_CARD
ALSA_CARD
]
default {
@func refer
name defaults.pcm.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_PCM_DEVICE
]
default {
@func refer
name defaults.pcm.device
}
}
}
@args.SUBDEV {
type integer
default {
@func refer
name defaults.pcm.subdevice
}
}
type hw
card $CARD
device $DEV
subdevice $SUBDEV
hint {
show {
@func refer
name defaults.namehint.extended
}
description "Direct hardware device without any conversions"
}
}
pcm.plughw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_PCM_CARD
ALSA_CARD
]
default {
@func refer
name defaults.pcm.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_PCM_DEVICE
]
default {
@func refer
name defaults.pcm.device
}
}
}
@args.SUBDEV {
type integer
default {
@func refer
name defaults.pcm.subdevice
}
}
type plug
slave.pcm {
type hw
card $CARD
device $DEV
subdevice $SUBDEV
}
hint {
show {
@func refer
name defaults.namehint.extended
}
description "Hardware device with all software conversions"
}
}
pcm.plug {
@args [ SLAVE ]
@args.SLAVE {
type string
}
type plug
slave.pcm $SLAVE
}
pcm.shm {
@args [ SOCKET PCM ]
@args.SOCKET {
type string
}
@args.PCM {
type string
}
type shm
server $SOCKET
pcm $PCM
}
pcm.tee {
@args [ SLAVE FILE FORMAT ]
@args.SLAVE {
type string
}
@args.FILE {
type string
}
@args.FORMAT {
type string
default {
@func refer
name defaults.pcm.file_format
}
}
type file
slave.pcm $SLAVE
file $FILE
format $FORMAT
truncate {
@func refer
name defaults.pcm.file_truncate
}
}
pcm.file {
@args [ FILE FORMAT ]
@args.FILE {
type string
}
@args.FORMAT {
type string
default {
@func refer
name defaults.pcm.file_format
}
}
type file
slave.pcm null
file $FILE
format $FORMAT
truncate {
@func refer
name defaults.pcm.file_truncate
}
}
pcm.null {
type null
hint {
show {
@func refer
name defaults.namehint.basic
}
description "Discard all samples (playback) or generate zero samples (capture)"
}
}
# redirect to load-on-demand extended pcm definitions
pcm.cards cards.pcm
pcm.default cards.pcm.default
pcm.sysdefault cards.pcm.default
pcm.front cards.pcm.front
pcm.rear cards.pcm.rear
pcm.center_lfe cards.pcm.center_lfe
pcm.side cards.pcm.side
pcm.surround21 cards.pcm.surround21
pcm.surround40 cards.pcm.surround40
pcm.surround41 cards.pcm.surround41
pcm.surround50 cards.pcm.surround50
pcm.surround51 cards.pcm.surround51
pcm.surround71 cards.pcm.surround71
pcm.iec958 cards.pcm.iec958
pcm.spdif iec958
pcm.hdmi cards.pcm.hdmi
pcm.dmix cards.pcm.dmix
pcm.dsnoop cards.pcm.dsnoop
pcm.modem cards.pcm.modem
pcm.phoneline cards.pcm.phoneline
#
# Control interface
#
ctl.default cards.ctl.default
ctl.sysdefault cards.ctl.default
ctl.hw {
@args [ CARD ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_CTL_CARD
ALSA_CARD
]
default {
@func refer
name defaults.ctl.card
}
}
}
type hw
card $CARD
hint.description "Direct control device"
}
ctl.shm {
@args [ SOCKET CTL ]
@args.SOCKET {
type string
}
@args.CTL {
type string
}
type shm
server $SOCKET
ctl $CTL
}
#
# RawMidi interface
#
rawmidi.default {
type hw
card {
@func getenv
vars [
ALSA_RAWMIDI_CARD
ALSA_CARD
]
default {
@func refer
name defaults.rawmidi.card
}
}
device {
@func igetenv
vars [
ALSA_RAWMIDI_DEVICE
]
default {
@func refer
name defaults.rawmidi.device
}
}
hint.description "Default raw MIDI device"
}
rawmidi.hw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_RAWMIDI_CARD
ALSA_CARD
]
default {
@func refer
name defaults.rawmidi.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_RAWMIDI_DEVICE
]
default {
@func refer
name defaults.rawmidi.device
}
}
}
@args.SUBDEV {
type integer
default -1
}
type hw
card $CARD
device $DEV
subdevice $SUBDEV
hint {
description "Direct rawmidi driver device"
device $DEV
}
}
rawmidi.virtual {
@args [ MERGE ]
@args.MERGE {
type string
default 1
}
type virtual
merge $MERGE
}
#
# Sequencer interface
#
seq.default {
type hw
hint.description "Default sequencer device"
}
seq.hw {
type hw
}
#
# HwDep interface
#
hwdep.default {
type hw
card {
@func getenv
vars [
ALSA_HWDEP_CARD
ALSA_CARD
]
default {
@func refer
name defaults.hwdep.card
}
}
device {
@func igetenv
vars [
ALSA_HWDEP_DEVICE
]
default {
@func refer
name defaults.hwdep.device
}
}
hint.description "Default hardware dependent device"
}
hwdep.hw {
@args [ CARD DEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_HWDEP_CARD
ALSA_CARD
]
default {
@func refer
name defaults.hwdep.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_HWDEP_DEVICE
]
default {
@func refer
name defaults.hwdep.device
}
}
}
type hw
card $CARD
device $DEV
hint {
description "Direct hardware dependent device"
device $DEV
}
}
#
# Timer interface
#
timer_query.default {
type hw
}
timer_query.hw {
type hw
}
timer.default {
type hw
class {
@func refer
name defaults.timer.class
}
sclass {
@func refer
name defaults.timer.sclass
}
card {
@func refer
name defaults.timer.card
}
device {
@func refer
name defaults.timer.device
}
subdevice {
@func refer
name defaults.timer.subdevice
}
hint.description "Default timer device"
}
timer.hw {
@args [ CLASS SCLASS CARD DEV SUBDEV ]
@args.CLASS {
type integer
default {
@func refer
name defaults.timer.class
}
}
@args.SCLASS {
type integer
default {
@func refer
name defaults.timer.sclass
}
}
@args.CARD {
type string
default {
@func refer
name defaults.timer.card
}
}
@args.DEV {
type integer
default {
@func refer
name defaults.timer.device
}
}
@args.SUBDEV {
type integer
default {
@func refer
name defaults.timer.subdevice
}
}
type hw
class $CLASS
sclass $SCLASS
card $CARD
device $DEV
subdevice $SUBDEV
hint {
description "Direct timer device"
device $DEV
}
}
still no sound, FreeBSD left sound output, too!
lizbeth
Offline
what now, guys, has it left you speechless?
Offline
works now suddenly! I had to turn up the volume at cairo-dock! haha!
thx,
lizbeth
Offline
Pages: 1