You are not logged in.
- Topics: Active | Unanswered
#1 2021-09-10 09:33:07
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
[SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
Hi.
I have Acer Swift laptop with intel and nvidia graphics. I use it with external monitor and everything was good until today.
I ran "pacman -Syu" several times recently (I see it installed new kernel .5.14.2 instead of my previous 5.13.13 and updated nvidia driver from 470.63.01-4 to 470.63.01-7) Then I rebooted and found "white noise" on my external monitor connected via HDMI. Then I assume XOrg crashed as login window appeared again. I logged in again and instead of "white noise" I got no image on external monitor connected via HDMI.
I suspected a hardware problem. I have a dual boot system so I rebooted into Windows and it works fine there.
xrandr shows both monitors in output. I use XFCE and "Display" window appears when I connect HDMI cable (it allows to choose type of output - laptop monitor only, external only, mirrorred or extended). But when I choose External monitor (it is correctly detected as HP 24") there are no image on the external monitor. But, monitor doesn't go to sleep mode, i.e. it gets some valid signal via HDMI, but nothing is displayed, the screen is black (and backlight is on).
Here is a list of recently installed packages for last 2 days:
[root@solid etc]# ls -ltr /var/cache/pacman/pkg/ | grep "Sep 8" | grep -v sig
-rw-r--r-- 1 root root 673952 Sep 8 2019 hspell-1.4-2-x86_64.pkg.tar.xz
-rw-r--r-- 1 root root 166575 Sep 8 00:35 python-ipywidgets-7.6.3-2-any.pkg.tar.zst
-rw-r--r-- 1 root root 95501 Sep 8 00:48 python-pasta-0.2.0-4-any.pkg.tar.zst
-rw-r--r-- 1 root root 62403 Sep 8 00:55 python-soupsieve-2.2.1-2-any.pkg.tar.zst
-rw-r--r-- 1 root root 25629190 Sep 8 03:37 llvm-libs-12.0.1-4-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 7820 Sep 8 06:00 harfbuzz-icu-2.9.1-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 913340 Sep 8 06:00 harfbuzz-2.9.1-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 2705646 Sep 8 06:11 p7zip-1:17.04-3-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 10970115 Sep 8 06:16 js78-78.14.0-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 757034 Sep 8 09:12 vulkan-headers-1:1.2.191-1-any.pkg.tar.zst
-rw-r--r-- 1 root root 112921 Sep 8 09:15 vulkan-icd-loader-1.2.190-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 92457 Sep 8 09:40 python-jupyterlab_server-2.8.1-1-any.pkg.tar.zst
-rw-r--r-- 1 root root 1940426 Sep 8 10:47 python-debugpy-1.4.1-3-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 67802 Sep 8 10:54 wayland-protocols-1.22-1-any.pkg.tar.zst
-rw-r--r-- 1 root root 50898318 Sep 8 13:30 qt5-webengine-5.15.6-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 64150509 Sep 8 13:31 firefox-92.0-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 995179 Sep 8 13:32 qt5-script-5.15.6-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 161972020 Sep 8 14:40 pycharm-community-edition-2021.2.1-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 1884502 Sep 8 20:45 vim-8.2.3412-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 6747365 Sep 8 20:45 vim-runtime-8.2.3412-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 27137 Sep 8 21:36 python-distro-1.6.0-1-any.pkg.tar.zst
-rw-r--r-- 1 root root 685991 Sep 8 23:33 libhandy-1.4.0-1-x86_64.pkg.tar.zst
[root@solid etc]#
[root@solid etc]# ls -ltr /var/cache/pacman/pkg/ | grep "Sep 9" | grep -v sig
-rw-r--r-- 1 root root 74318 Sep 9 2020 qt5-webchannel-5.15.1-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 814702 Sep 9 2020 qt5-multimedia-5.15.1-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 49225 Sep 9 2020 qt5-speech-5.15.1-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 14814 Sep 9 2020 qt5-x11extras-5.15.1-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 51640464 Sep 9 02:01 thunderbird-91.1.0-2-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 3844813 Sep 9 09:44 jupyterlab-3.1.11-1-any.pkg.tar.zst
-rw-r--r-- 1 root root 1436085 Sep 9 12:30 pipewire-1:0.3.35-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 45881 Sep 9 12:30 gst-plugin-pipewire-1:0.3.35-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 26903 Sep 9 12:30 alsa-card-profiles-1:0.3.35-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 110808 Sep 9 12:30 pipewire-media-session-1:0.3.35-1-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 246108 Sep 9 13:31 virtualbox-host-modules-arch-6.1.26-11-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 24805112 Sep 9 13:31 nvidia-470.63.01-7-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 132290226 Sep 9 13:31 linux-5.14.2.arch1-2-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 524584 Sep 9 16:14 python-cryptography-3.4.8-2-x86_64.pkg.tar.zst
-rw-r--r-- 1 root root 54197 Sep 9 16:25 python-packaging-20.9-2-any.pkg.tar.zst
-rw-r--r-- 1 root root 466783 Sep 9 16:27 jupyter-server-1.11.0-1-any.pkg.tar.zst
-rw-r--r-- 1 root root 570267 Sep 9 16:30 python-setuptools-1:57.4.0-2-any.pkg.tar.zst
-rw-r--r-- 1 root root 214176 Sep 9 16:33 python-traitlets-5.0.5-2-any.pkg.tar.zst
-rw-r--r-- 1 root root 1909447 Sep 9 22:25 python-debugpy-1.4.3-1-x86_64.pkg.tar.zst
[root@solid etc]# I decided that problem might be related with an upgrade of linux and nvidia packages. So, I did:
pacman -U linux-5.13.13.arch1-1-x86_64.pkg.tar.zst virtualbox-host-modules-arch-6.1.26-8-x86_64.pkg.tar.zst nvidia-470.63.01-4-x86_64.pkg.tar.zst
mkinitcpio -Pand rebooted my laptop. But nothing changed.
There is nothing suspicious in dmesg for me:
[root@solid etc]# dmesg
[ 0.000000] Linux version 5.13.13-arch1-1 (linux@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Thu, 26 Aug 2021 19:14:36 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3afe0d83-05c4-4142-a08c-7c18b193c6fc rw loglevel=3 snd_hda_intel.dmic_detect=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000976cdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000976ce000-0x0000000097a9dfff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000097a9e000-0x0000000098c6efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000098c6f000-0x0000000099acefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000099acf000-0x0000000099b4efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000099b4f000-0x0000000099b4ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000099b50000-0x000000009f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff400000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000055e7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x99b4e000 ACPI 2.0=0x99b4e014 SMBIOS=0x97ce5000 SMBIOS 3.0=0x97ce3000 ESRT=0x97ce1d18
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: Acer Swift SF314-58G/Strongbow_CM, BIOS V1.08 08/18/2020
[ 0.000000] tsc: Detected 2300.000 MHz processor
[ 0.000000] tsc: Detected 2299.968 MHz TSC
[ 0.000010] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000015] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000023] last_pfn = 0x55e800 max_arch_pfn = 0x400000000
[ 0.000225] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001432] last_pfn = 0x99b50 max_arch_pfn = 0x400000000
[ 0.013862] esrt: Reserving ESRT space from 0x0000000097ce1d18 to 0x0000000097ce1d50.
[ 0.013874] Using GB pages for direct mapping
[ 0.014414] Secure boot could not be determined
[ 0.014416] RAMDISK: [mem 0x37033000-0x37810fff]
[ 0.014420] ACPI: Early table checksum verification disabled
[ 0.014423] ACPI: RSDP 0x0000000099B4E014 000024 (v02 ACRSYS)
[ 0.014430] ACPI: XSDT 0x0000000099AE3188 0000EC (v01 ACRSYS ACRPRDCT 00000002 01000013)
[ 0.014438] ACPI: FACP 0x0000000099B2A000 00010C (v05 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014447] ACPI: DSDT 0x0000000099AE5000 040833 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014452] ACPI: FACS 0x0000000099A6F000 000040
[ 0.014456] ACPI: UEFI 0x0000000099ACD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014461] ACPI: SSDT 0x0000000099B4B000 001B4A (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.014466] ACPI: SSDT 0x0000000099B47000 003164 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.014470] ACPI: SSDT 0x0000000099B43000 0031CE (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.014475] ACPI: LPIT 0x0000000099B41000 000094 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014480] ACPI: WSMT 0x0000000099B40000 000028 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014484] ACPI: SSDT 0x0000000099B3F000 000B6F (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.014489] ACPI: SSDT 0x0000000099B3D000 00149F (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.014493] ACPI: DBGP 0x0000000099B3C000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014498] ACPI: DBG2 0x0000000099B3B000 000054 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014502] ACPI: SSDT 0x0000000099B39000 0011CC (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.014507] ACPI: SSDT 0x0000000099B33000 005715 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.014511] ACPI: SSDT 0x0000000099B2D000 005BF9 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.014516] ACPI: NHLT 0x0000000099B2B000 00181E (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014520] ACPI: HPET 0x0000000099B29000 000038 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014525] ACPI: APIC 0x0000000099B28000 000164 (v03 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014530] ACPI: MCFG 0x0000000099B27000 00003C (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014534] ACPI: SLIC 0x0000000099B26000 000176 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014539] ACPI: DMAR 0x0000000099AE4000 0000A8 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014544] ACPI: SSDT 0x0000000099ADF000 003124 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.014548] ACPI: SSDT 0x0000000099ADD000 001427 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.014553] ACPI: SSDT 0x0000000099B4D000 000164 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.014558] ACPI: FPDT 0x0000000099ADC000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.014562] ACPI: BGRT 0x0000000099ADB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014566] ACPI: Reserving FACP table memory at [mem 0x99b2a000-0x99b2a10b]
[ 0.014568] ACPI: Reserving DSDT table memory at [mem 0x99ae5000-0x99b25832]
[ 0.014570] ACPI: Reserving FACS table memory at [mem 0x99a6f000-0x99a6f03f]
[ 0.014571] ACPI: Reserving UEFI table memory at [mem 0x99acd000-0x99acd235]
[ 0.014573] ACPI: Reserving SSDT table memory at [mem 0x99b4b000-0x99b4cb49]
[ 0.014574] ACPI: Reserving SSDT table memory at [mem 0x99b47000-0x99b4a163]
[ 0.014576] ACPI: Reserving SSDT table memory at [mem 0x99b43000-0x99b461cd]
[ 0.014577] ACPI: Reserving LPIT table memory at [mem 0x99b41000-0x99b41093]
[ 0.014579] ACPI: Reserving WSMT table memory at [mem 0x99b40000-0x99b40027]
[ 0.014580] ACPI: Reserving SSDT table memory at [mem 0x99b3f000-0x99b3fb6e]
[ 0.014582] ACPI: Reserving SSDT table memory at [mem 0x99b3d000-0x99b3e49e]
[ 0.014583] ACPI: Reserving DBGP table memory at [mem 0x99b3c000-0x99b3c033]
[ 0.014585] ACPI: Reserving DBG2 table memory at [mem 0x99b3b000-0x99b3b053]
[ 0.014586] ACPI: Reserving SSDT table memory at [mem 0x99b39000-0x99b3a1cb]
[ 0.014588] ACPI: Reserving SSDT table memory at [mem 0x99b33000-0x99b38714]
[ 0.014589] ACPI: Reserving SSDT table memory at [mem 0x99b2d000-0x99b32bf8]
[ 0.014591] ACPI: Reserving NHLT table memory at [mem 0x99b2b000-0x99b2c81d]
[ 0.014592] ACPI: Reserving HPET table memory at [mem 0x99b29000-0x99b29037]
[ 0.014594] ACPI: Reserving APIC table memory at [mem 0x99b28000-0x99b28163]
[ 0.014595] ACPI: Reserving MCFG table memory at [mem 0x99b27000-0x99b2703b]
[ 0.014597] ACPI: Reserving SLIC table memory at [mem 0x99b26000-0x99b26175]
[ 0.014598] ACPI: Reserving DMAR table memory at [mem 0x99ae4000-0x99ae40a7]
[ 0.014600] ACPI: Reserving SSDT table memory at [mem 0x99adf000-0x99ae2123]
[ 0.014602] ACPI: Reserving SSDT table memory at [mem 0x99add000-0x99ade426]
[ 0.014603] ACPI: Reserving SSDT table memory at [mem 0x99b4d000-0x99b4d163]
[ 0.014605] ACPI: Reserving FPDT table memory at [mem 0x99adc000-0x99adc043]
[ 0.014607] ACPI: Reserving BGRT table memory at [mem 0x99adb000-0x99adb037]
[ 0.014619] ACPI: Local APIC address 0xfee00000
[ 0.014840] No NUMA configuration found
[ 0.014841] Faking a node at [mem 0x0000000000000000-0x000000055e7fffff]
[ 0.014847] NODE_DATA(0) allocated [mem 0x55e7fc000-0x55e7fffff]
[ 0.014899] Zone ranges:
[ 0.014901] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.014904] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.014906] Normal [mem 0x0000000100000000-0x000000055e7fffff]
[ 0.014909] Device empty
[ 0.014911] Movable zone start for each node
[ 0.014912] Early memory node ranges
[ 0.014913] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.014915] node 0: [mem 0x0000000000100000-0x00000000976cdfff]
[ 0.014917] node 0: [mem 0x0000000099b4f000-0x0000000099b4ffff]
[ 0.014919] node 0: [mem 0x0000000100000000-0x000000055e7fffff]
[ 0.014923] Initmem setup node 0 [mem 0x0000000000001000-0x000000055e7fffff]
[ 0.014926] On node 0 totalpages: 5201517
[ 0.014928] DMA zone: 64 pages used for memmap
[ 0.014929] DMA zone: 158 pages reserved
[ 0.014931] DMA zone: 3998 pages, LIFO batch:0
[ 0.014933] DMA32 zone: 9628 pages used for memmap
[ 0.014934] DMA32 zone: 616143 pages, LIFO batch:63
[ 0.014936] Normal zone: 71584 pages used for memmap
[ 0.014937] Normal zone: 4581376 pages, LIFO batch:63
[ 0.014941] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.014999] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.019881] On node 0, zone DMA32: 9345 pages in unavailable ranges
[ 0.055723] On node 0, zone Normal: 25776 pages in unavailable ranges
[ 0.055817] On node 0, zone Normal: 6144 pages in unavailable ranges
[ 0.055833] Reserving Intel graphics memory at [mem 0x9b800000-0x9f7fffff]
[ 0.056212] ACPI: PM-Timer IO Port: 0x1808
[ 0.056214] ACPI: Local APIC address 0xfee00000
[ 0.056223] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.056226] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.056227] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.056228] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.056229] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.056231] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.056232] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.056233] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.056234] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.056235] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.056236] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.056238] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.056239] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.056240] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.056241] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.056242] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.056244] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[ 0.056245] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[ 0.056246] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[ 0.056247] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[ 0.056301] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.056305] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.056308] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.056311] ACPI: IRQ0 used by override.
[ 0.056313] ACPI: IRQ9 used by override.
[ 0.056316] Using ACPI (MADT) for SMP configuration information
[ 0.056318] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.056326] e820: update [mem 0x85dcf000-0x85ec2fff] usable ==> reserved
[ 0.056337] TSC deadline timer available
[ 0.056339] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.056363] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.056366] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.056369] PM: hibernation: Registered nosave memory: [mem 0x85dcf000-0x85ec2fff]
[ 0.056372] PM: hibernation: Registered nosave memory: [mem 0x976ce000-0x97a9dfff]
[ 0.056373] PM: hibernation: Registered nosave memory: [mem 0x97a9e000-0x98c6efff]
[ 0.056374] PM: hibernation: Registered nosave memory: [mem 0x98c6f000-0x99acefff]
[ 0.056376] PM: hibernation: Registered nosave memory: [mem 0x99acf000-0x99b4efff]
[ 0.056378] PM: hibernation: Registered nosave memory: [mem 0x99b50000-0x9f7fffff]
[ 0.056379] PM: hibernation: Registered nosave memory: [mem 0x9f800000-0xdfffffff]
[ 0.056380] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.056382] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.056383] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.056384] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed0ffff]
[ 0.056385] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.056386] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.056387] PM: hibernation: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.056388] PM: hibernation: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[ 0.056390] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.056391] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff3fffff]
[ 0.056392] PM: hibernation: Registered nosave memory: [mem 0xff400000-0xffffffff]
[ 0.056394] [mem 0x9f800000-0xdfffffff] available for PCI devices
[ 0.056396] Booting paravirtualized kernel on bare hardware
[ 0.056399] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.064022] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.064279] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
[ 0.064290] pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
[ 0.064293] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.064324] Built 1 zonelists, mobility grouping on. Total pages: 5120083
[ 0.064326] Policy zone: Normal
[ 0.064327] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3afe0d83-05c4-4142-a08c-7c18b193c6fc rw loglevel=3 snd_hda_intel.dmic_detect=0
[ 0.066739] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.067897] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.068138] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[ 0.126193] Memory: 20242344K/20806068K available (14344K kernel code, 2050K rwdata, 9084K rodata, 1796K init, 4128K bss, 563464K reserved, 0K cma-reserved)
[ 0.126201] random: get_random_u64 called from __kmem_cache_create+0x2a/0x580 with crng_init=0
[ 0.126364] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.126380] ftrace: allocating 42290 entries in 166 pages
[ 0.148688] ftrace: allocated 166 pages with 4 groups
[ 0.148817] rcu: Preemptible hierarchical RCU implementation.
[ 0.148819] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.148819] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.148821] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.148823] Trampoline variant of Tasks RCU enabled.
[ 0.148824] Rude variant of Tasks RCU enabled.
[ 0.148825] Tracing variant of Tasks RCU enabled.
[ 0.148826] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.148827] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.155104] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[ 0.155694] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.155778] Console: colour dummy device 80x25
[ 0.155804] printk: console [tty0] enabled
[ 0.155829] ACPI: Core revision 20210331
[ 0.156475] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.156612] APIC: Switch to symmetric I/O mode setup
[ 0.156615] DMAR: Host address width 39
[ 0.156616] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.156624] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.156627] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.156632] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.156635] DMAR: RMRR base: 0x00000098a73000 end: 0x00000098a92fff
[ 0.156638] DMAR: RMRR base: 0x0000009b000000 end: 0x0000009f7fffff
[ 0.156640] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.156643] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.156644] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.158977] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.158980] x2apic enabled
[ 0.159010] Switched APIC routing to cluster x2apic.
[ 0.164939] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.179936] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212717146a7, max_idle_ns: 440795291431 ns
[ 0.179943] Calibrating delay loop (skipped), value calculated using timer frequency.. 4601.60 BogoMIPS (lpj=7666560)
[ 0.179947] pid_max: default: 32768 minimum: 301
[ 0.184366] LSM: Security Framework initializing
[ 0.184381] landlock: Up and running.
[ 0.184383] Yama: becoming mindful.
[ 0.184391] LSM support for eBPF active
[ 0.184463] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.184522] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.184838] x86/cpu: SGX disabled by BIOS.
[ 0.184847] CPU0: Thermal monitoring enabled (TM1)
[ 0.184892] process: using mwait in idle threads
[ 0.184895] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.184897] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.184902] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.184905] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.184906] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.184908] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.184910] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.184914] unchecked MSR access error: RDMSR from 0x123 at rIP: 0xffffffff8ee72994 (native_read_msr+0x4/0x30)
[ 0.184922] Call Trace:
[ 0.184926] update_srbds_msr+0x36/0x70
[ 0.184933] check_bugs+0xa3b/0xaeb
[ 0.184938] start_kernel+0x85f/0x893
[ 0.184944] secondary_startup_64_no_verify+0xc2/0xcb
[ 0.184951] unchecked MSR access error: WRMSR to 0x123 (tried to write 0x0000000000000001) at rIP: 0xffffffff8ee72ad4 (native_write_msr+0x4/0x20)
[ 0.184957] Call Trace:
[ 0.184958] update_srbds_msr+0x5f/0x70
[ 0.184962] check_bugs+0xa3b/0xaeb
[ 0.184965] start_kernel+0x85f/0x893
[ 0.184969] secondary_startup_64_no_verify+0xc2/0xcb
[ 0.184974] SRBDS: Mitigation: TSX disabled
[ 0.191314] Freeing SMP alternatives memory: 36K
[ 0.192842] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1914
[ 0.192871] smpboot: CPU0: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xc)
[ 0.193101] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.193119] ... version: 4
[ 0.193120] ... bit width: 48
[ 0.193121] ... generic registers: 4
[ 0.193122] ... value mask: 0000ffffffffffff
[ 0.193123] ... max period: 00007fffffffffff
[ 0.193124] ... fixed-purpose events: 3
[ 0.193125] ... event mask: 000000070000000f
[ 0.193261] rcu: Hierarchical SRCU implementation.
[ 0.193274] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.193274] smp: Bringing up secondary CPUs ...
[ 0.193274] x86: Booting SMP configuration:
[ 0.193274] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.197448] smp: Brought up 1 node, 8 CPUs
[ 0.197448] smpboot: Max logical packages: 1
[ 0.197448] smpboot: Total of 8 processors activated (36814.80 BogoMIPS)
[ 0.200768] devtmpfs: initialized
[ 0.200768] x86/mm: Memory block size: 128MB
[ 0.201577] PM: Registering ACPI NVS region [mem 0x98c6f000-0x99acefff] (15073280 bytes)
[ 0.201577] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.201577] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.201577] pinctrl core: initialized pinctrl subsystem
[ 0.203287] PM: RTC time: 08:51:10, date: 2021-09-10
[ 0.203462] NET: Registered protocol family 16
[ 0.203935] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.204300] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.204697] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.204711] audit: initializing netlink subsys (disabled)
[ 0.204727] audit: type=2000 audit(1631263870.043:1): state=initialized audit_enabled=0 res=1
[ 0.204727] thermal_sys: Registered thermal governor 'fair_share'
[ 0.204727] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.204727] thermal_sys: Registered thermal governor 'step_wise'
[ 0.204727] thermal_sys: Registered thermal governor 'user_space'
[ 0.204727] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.204727] cpuidle: using governor ladder
[ 0.204727] cpuidle: using governor menu
[ 0.204727] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.204727] ACPI: bus type PCI registered
[ 0.204727] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.204727] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.204727] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.204727] PCI: Using configuration type 1 for base access
[ 0.204727] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.207310] Kprobes globally optimized
[ 0.207317] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.207317] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.207317] ACPI: Added _OSI(Module Device)
[ 0.207317] ACPI: Added _OSI(Processor Device)
[ 0.207317] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.207317] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.207317] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.207317] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.207317] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.292168] ACPI: 12 ACPI AML tables successfully acquired and loaded
[ 0.309334] ACPI: Dynamic OEM Table Load:
[ 0.309348] ACPI: SSDT 0xFFFF9EBAC12A2A00 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160422)
[ 0.313347] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.316234] ACPI: Dynamic OEM Table Load:
[ 0.316246] ACPI: SSDT 0xFFFF9EBAC12B3000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.318167] ACPI: Dynamic OEM Table Load:
[ 0.318178] ACPI: SSDT 0xFFFF9EBAC12AD000 0005A2 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.320230] ACPI: Dynamic OEM Table Load:
[ 0.320240] ACPI: SSDT 0xFFFF9EBAC12A6800 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
[ 0.322065] ACPI: Dynamic OEM Table Load:
[ 0.322077] ACPI: SSDT 0xFFFF9EBAC1378000 000BE2 (v02 PmRef HwpLvt 00003000 INTL 20160422)
[ 0.324349] ACPI: Dynamic OEM Table Load:
[ 0.324362] ACPI: SSDT 0xFFFF9EBAC12AA800 000778 (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.326503] ACPI: Dynamic OEM Table Load:
[ 0.326513] ACPI: SSDT 0xFFFF9EBAC12B7000 0003D7 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.328656] ACPI: Dynamic OEM Table Load:
[ 0.328668] ACPI: SSDT 0xFFFF9EBAC137D000 000D74 (v02 PmRef ApPsd 00003000 INTL 20160422)
[ 0.332039] ACPI: Dynamic OEM Table Load:
[ 0.332050] ACPI: SSDT 0xFFFF9EBAC12B0400 0003CA (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.339862] ACPI: EC: EC started
[ 0.339864] ACPI: EC: interrupt blocked
[ 0.353274] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.353274] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.353274] ACPI: Interpreter enabled
[ 0.353274] ACPI: (supports S0 S3 S4 S5)
[ 0.353274] ACPI: Using IOAPIC for interrupt routing
[ 0.353274] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.353274] random: fast init done
[ 0.356784] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.438029] ACPI: PM: Power Resource [USBC] (on)
[ 0.495466] ACPI: PM: Power Resource [PCRP] (on)
[ 0.590772] ACPI: PM: Power Resource [V0PR] (on)
[ 0.593572] ACPI: PM: Power Resource [V1PR] (on)
[ 0.596292] ACPI: PM: Power Resource [V2PR] (on)
[ 0.644577] ACPI: PM: Power Resource [WRST] (on)
[ 0.691500] ACPI: PM: Power Resource [PIN] (off)
[ 0.698881] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.698928] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.711452] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.711455] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.735859] PCI host bridge to bus 0000:00
[ 0.735862] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.735902] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.735904] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.735906] pci_bus 0000:00: root bus resource [mem 0x9f800000-0xdfffffff window]
[ 0.735944] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.735946] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.736073] pci 0000:00:00.0: [8086:9b61] type 00 class 0x060000
[ 0.746061] pci 0000:00:02.0: [8086:9b41] type 00 class 0x030000
[ 0.746109] pci 0000:00:02.0: reg 0x10: [mem 0xb5000000-0xb5ffffff 64bit]
[ 0.746153] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.746195] pci 0000:00:02.0: reg 0x20: [io 0x7000-0x703f]
[ 0.746327] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.756582] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.756655] pci 0000:00:04.0: reg 0x10: [mem 0xbb110000-0xbb117fff 64bit]
[ 0.768321] pci 0000:00:12.0: [8086:02f9] type 00 class 0x118000
[ 0.768416] pci 0000:00:12.0: reg 0x10: [mem 0xbb124000-0xbb124fff 64bit]
[ 0.778237] pci 0000:00:14.0: [8086:02ed] type 00 class 0x0c0330
[ 0.778328] pci 0000:00:14.0: reg 0x10: [mem 0xbb100000-0xbb10ffff 64bit]
[ 0.778761] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.791443] pci 0000:00:14.2: [8086:02ef] type 00 class 0x050000
[ 0.791784] pci 0000:00:14.2: reg 0x10: [mem 0xbb120000-0xbb121fff 64bit]
[ 0.792004] pci 0000:00:14.2: reg 0x18: [mem 0xbb125000-0xbb125fff 64bit]
[ 0.803068] pci 0000:00:14.3: [8086:02f0] type 00 class 0x028000
[ 0.803951] pci 0000:00:14.3: reg 0x10: [mem 0xbb118000-0xbb11bfff 64bit]
[ 0.808521] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ 0.820762] pci 0000:00:15.0: [8086:02e8] type 00 class 0x0c8000
[ 0.821881] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.838157] pci 0000:00:15.1: [8086:02e9] type 00 class 0x0c8000
[ 0.839275] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.854953] pci 0000:00:16.0: [8086:02e0] type 00 class 0x078000
[ 0.855084] pci 0000:00:16.0: reg 0x10: [mem 0xbb128000-0xbb128fff 64bit]
[ 0.855563] pci 0000:00:16.0: PME# supported from D3hot
[ 0.869187] pci 0000:00:17.0: [8086:02d3] type 00 class 0x010601
[ 0.869278] pci 0000:00:17.0: reg 0x10: [mem 0xbb122000-0xbb123fff]
[ 0.869359] pci 0000:00:17.0: reg 0x14: [mem 0xbb12d000-0xbb12d0ff]
[ 0.869405] pci 0000:00:17.0: reg 0x18: [io 0x7080-0x7087]
[ 0.869451] pci 0000:00:17.0: reg 0x1c: [io 0x7088-0x708b]
[ 0.869499] pci 0000:00:17.0: reg 0x20: [io 0x7060-0x707f]
[ 0.869581] pci 0000:00:17.0: reg 0x24: [mem 0xbb12c000-0xbb12c7ff]
[ 0.869887] pci 0000:00:17.0: PME# supported from D3hot
[ 0.882953] pci 0000:00:19.0: [8086:02c5] type 00 class 0x0c8000
[ 0.884057] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.899869] pci 0000:00:1c.0: [8086:02b8] type 01 class 0x060400
[ 0.900505] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.917078] pci 0000:00:1c.4: [8086:02bc] type 01 class 0x060400
[ 0.917636] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.917770] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
[ 0.934178] pci 0000:00:1d.0: [8086:02b0] type 01 class 0x060400
[ 0.943662] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.951186] pci 0000:00:1d.4: [8086:02b4] type 01 class 0x060400
[ 0.951709] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[ 0.951879] pci 0000:00:1d.4: PTM enabled (root), 4ns granularity
[ 0.968333] pci 0000:00:1f.0: [8086:0284] type 00 class 0x060100
[ 0.982404] pci 0000:00:1f.3: [8086:02c8] type 00 class 0x040100
[ 0.982767] pci 0000:00:1f.3: reg 0x10: [mem 0xbb11c000-0xbb11ffff 64bit]
[ 0.983222] pci 0000:00:1f.3: reg 0x20: [mem 0xbb000000-0xbb0fffff 64bit]
[ 0.984130] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 1.001126] pci 0000:00:1f.4: [8086:02a3] type 00 class 0x0c0500
[ 1.001939] pci 0000:00:1f.4: reg 0x10: [mem 0xbb12a000-0xbb12a0ff 64bit]
[ 1.002942] pci 0000:00:1f.4: reg 0x20: [io 0x7040-0x705f]
[ 1.009994] random: crng init done
[ 1.015293] pci 0000:00:1f.5: [8086:02a4] type 00 class 0x0c8000
[ 1.015552] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 1.026237] pci 0000:00:1c.0: PCI bridge to [bus 01-05]
[ 1.026279] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 1.026284] pci 0000:00:1c.0: bridge window [mem 0xba000000-0xbaffffff]
[ 1.026327] pci 0000:00:1c.0: bridge window [mem 0xb2000000-0xb2ffffff 64bit pref]
[ 1.026823] pci 0000:06:00.0: [10de:1d13] type 00 class 0x030200
[ 1.026912] pci 0000:06:00.0: reg 0x10: [mem 0xb9000000-0xb9ffffff]
[ 1.026997] pci 0000:06:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.027082] pci 0000:06:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 1.027127] pci 0000:06:00.0: reg 0x24: [io 0x5000-0x507f]
[ 1.027172] pci 0000:06:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 1.027341] pci 0000:06:00.0: Enabling HDA controller
[ 1.030371] pci 0000:00:1c.4: PCI bridge to [bus 06-0a]
[ 1.030375] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff]
[ 1.030415] pci 0000:00:1c.4: bridge window [mem 0xb8000000-0xb9ffffff]
[ 1.030455] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.030805] pci 0000:00:1d.0: PCI bridge to [bus 0b-0f]
[ 1.030844] pci 0000:00:1d.0: bridge window [io 0x4000-0x4fff]
[ 1.030849] pci 0000:00:1d.0: bridge window [mem 0xb7000000-0xb7ffffff]
[ 1.030891] pci 0000:00:1d.0: bridge window [mem 0xb3000000-0xb3ffffff 64bit pref]
[ 1.031283] pci 0000:10:00.0: [15b7:5003] type 00 class 0x010802
[ 1.031413] pci 0000:10:00.0: reg 0x10: [mem 0xb6000000-0xb6003fff 64bit]
[ 1.033091] pci 0000:00:1d.4: PCI bridge to [bus 10-14]
[ 1.033131] pci 0000:00:1d.4: bridge window [io 0x3000-0x3fff]
[ 1.033134] pci 0000:00:1d.4: bridge window [mem 0xb6000000-0xb6ffffff]
[ 1.033174] pci 0000:00:1d.4: bridge window [mem 0xb4000000-0xb4ffffff 64bit pref]
[ 1.200727] acpi LNXPOWER:06: Turning OFF
[ 1.200771] acpi LNXPOWER:05: Turning OFF
[ 1.201255] ACPI: EC: interrupt unblocked
[ 1.201257] ACPI: EC: event unblocked
[ 1.201273] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.201274] ACPI: EC: GPE=0x50
[ 1.201276] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[ 1.201279] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[ 1.201355] iommu: Default domain type: Translated
[ 1.201375] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.201375] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.201375] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.201375] vgaarb: loaded
[ 1.201375] SCSI subsystem initialized
[ 1.203298] libata version 3.00 loaded.
[ 1.203298] ACPI: bus type USB registered
[ 1.203305] usbcore: registered new interface driver usbfs
[ 1.203312] usbcore: registered new interface driver hub
[ 1.203320] usbcore: registered new device driver usb
[ 1.203344] pps_core: LinuxPPS API ver. 1 registered
[ 1.203346] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.203349] PTP clock support registered
[ 1.203358] EDAC MC: Ver: 3.0.0
[ 1.203544] Registered efivars operations
[ 1.203544] NetLabel: Initializing
[ 1.203544] NetLabel: domain hash size = 128
[ 1.203544] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.203544] NetLabel: unlabeled traffic allowed by default
[ 1.203544] PCI: Using ACPI for IRQ routing
[ 1.242596] PCI: pci_cache_line_size set to 64 bytes
[ 1.242846] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 1.243275] e820: reserve RAM buffer [mem 0x85dcf000-0x87ffffff]
[ 1.243275] e820: reserve RAM buffer [mem 0x976ce000-0x97ffffff]
[ 1.243275] e820: reserve RAM buffer [mem 0x99b50000-0x9bffffff]
[ 1.243275] e820: reserve RAM buffer [mem 0x55e800000-0x55fffffff]
[ 1.243327] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.243336] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 1.248720] clocksource: Switched to clocksource tsc-early
[ 1.256265] VFS: Disk quotas dquot_6.6.0
[ 1.256284] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.256399] pnp: PnP ACPI init
[ 1.256570] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[ 1.256581] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.256985] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 1.256991] system 00:01: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 1.256994] system 00:01: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[ 1.256997] system 00:01: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 1.256999] system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 1.257002] system 00:01: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 1.257004] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.257011] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.257498] system 00:02: [io 0x2000-0x20fe] has been reserved
[ 1.257504] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.257668] system 00:03: [mem 0xfe800000-0xfe80ffff] has been reserved
[ 1.257675] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.257747] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.257889] system 00:05: [io 0x1854-0x1857] has been reserved
[ 1.257896] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.258307] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.259700] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.259704] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.259707] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.259710] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.259713] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.259715] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 1.259717] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 1.259719] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.259725] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.260437] system 00:08: [mem 0xfe038000-0xfe038fff] has been reserved
[ 1.260444] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.260949] pnp: PnP ACPI: found 9 devices
[ 1.266904] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.266978] NET: Registered protocol family 2
[ 1.267171] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 1.269896] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 1.270130] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 1.270522] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 1.270619] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.270754] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ 1.270898] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 1.271014] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 1.271128] NET: Registered protocol family 1
[ 1.271134] NET: Registered protocol family 44
[ 1.271139] pci 0000:06:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 1.271156] pci 0000:00:15.0: BAR 0: assigned [mem 0x9f800000-0x9f800fff 64bit]
[ 1.271222] pci 0000:00:15.1: BAR 0: assigned [mem 0x9f801000-0x9f801fff 64bit]
[ 1.271280] pci 0000:00:19.0: BAR 0: assigned [mem 0x9f802000-0x9f802fff 64bit]
[ 1.271337] pci 0000:00:1c.0: PCI bridge to [bus 01-05]
[ 1.271342] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 1.271347] pci 0000:00:1c.0: bridge window [mem 0xba000000-0xbaffffff]
[ 1.271351] pci 0000:00:1c.0: bridge window [mem 0xb2000000-0xb2ffffff 64bit pref]
[ 1.271358] pci 0000:06:00.0: BAR 6: assigned [mem 0xb8000000-0xb807ffff pref]
[ 1.271360] pci 0000:00:1c.4: PCI bridge to [bus 06-0a]
[ 1.271362] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff]
[ 1.271366] pci 0000:00:1c.4: bridge window [mem 0xb8000000-0xb9ffffff]
[ 1.271370] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.271375] pci 0000:00:1d.0: PCI bridge to [bus 0b-0f]
[ 1.271379] pci 0000:00:1d.0: bridge window [io 0x4000-0x4fff]
[ 1.271383] pci 0000:00:1d.0: bridge window [mem 0xb7000000-0xb7ffffff]
[ 1.271386] pci 0000:00:1d.0: bridge window [mem 0xb3000000-0xb3ffffff 64bit pref]
[ 1.271394] pci 0000:00:1d.4: PCI bridge to [bus 10-14]
[ 1.271396] pci 0000:00:1d.4: bridge window [io 0x3000-0x3fff]
[ 1.271400] pci 0000:00:1d.4: bridge window [mem 0xb6000000-0xb6ffffff]
[ 1.271403] pci 0000:00:1d.4: bridge window [mem 0xb4000000-0xb4ffffff 64bit pref]
[ 1.271409] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.271411] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.271413] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.271415] pci_bus 0000:00: resource 7 [mem 0x9f800000-0xdfffffff window]
[ 1.271417] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[ 1.271419] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
[ 1.271421] pci_bus 0000:01: resource 1 [mem 0xba000000-0xbaffffff]
[ 1.271423] pci_bus 0000:01: resource 2 [mem 0xb2000000-0xb2ffffff 64bit pref]
[ 1.271425] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 1.271426] pci_bus 0000:06: resource 1 [mem 0xb8000000-0xb9ffffff]
[ 1.271428] pci_bus 0000:06: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.271430] pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff]
[ 1.271432] pci_bus 0000:0b: resource 1 [mem 0xb7000000-0xb7ffffff]
[ 1.271433] pci_bus 0000:0b: resource 2 [mem 0xb3000000-0xb3ffffff 64bit pref]
[ 1.271435] pci_bus 0000:10: resource 0 [io 0x3000-0x3fff]
[ 1.271437] pci_bus 0000:10: resource 1 [mem 0xb6000000-0xb6ffffff]
[ 1.271439] pci_bus 0000:10: resource 2 [mem 0xb4000000-0xb4ffffff 64bit pref]
[ 1.271704] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.273974] PCI: CLS 64 bytes, default 64
[ 1.274009] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.274010] software IO TLB: mapped [mem 0x0000000092d6a000-0x0000000096d6a000] (64MB)
[ 1.274052] Trying to unpack rootfs image as initramfs...
[ 1.275192] Initialise system trusted keyrings
[ 1.275205] Key type blacklist registered
[ 1.275259] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 1.276802] zbud: loaded
[ 1.290371] Key type asymmetric registered
[ 1.290374] Asymmetric key parser 'x509' registered
[ 1.290382] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 1.290429] io scheduler mq-deadline registered
[ 1.290430] io scheduler kyber registered
[ 1.290477] io scheduler bfq registered
[ 1.292980] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[ 1.293350] pcieport 0000:00:1c.4: PME: Signaling with IRQ 123
[ 1.293428] pcieport 0000:00:1c.4: AER: enabled with IRQ 123
[ 1.293477] pcieport 0000:00:1c.4: DPC: enabled with IRQ 123
[ 1.293479] pcieport 0000:00:1c.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 1.293625] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124
[ 1.293653] pcieport 0000:00:1d.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 1.294015] pcieport 0000:00:1d.4: PME: Signaling with IRQ 125
[ 1.294081] pcieport 0000:00:1d.4: AER: enabled with IRQ 125
[ 1.294145] pcieport 0000:00:1d.4: DPC: enabled with IRQ 125
[ 1.294146] pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 1.294263] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.294299] efifb: probing for efifb
[ 1.294317] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
[ 1.294319] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.294321] efifb: scrolling: redraw
[ 1.294322] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.294365] fbcon: Deferring console take-over
[ 1.294367] fb0: EFI VGA frame buffer device
[ 1.295295] ACPI: AC: AC Adapter [ADP1] (on-line)
[ 1.295387] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.295410] ACPI: button: Lid Switch [LID0]
[ 1.295445] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.295464] ACPI: button: Sleep Button [SLPB]
[ 1.295683] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1914
[ 1.301991] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.301994] ACPI: thermal: Thermal Zone [TZ01] (51 C)
[ 1.302372] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.302375] ACPI: thermal: Thermal Zone [TZ00] (40 C)
[ 1.302652] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.303745] ACPI: battery: Slot [BAT0] (battery present)
[ 1.305004] Non-volatile memory driver v1.3
[ 1.305007] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.305008] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.305932] nvme nvme0: pci function 0000:10:00.0
[ 1.305979] ahci 0000:00:17.0: version 3.0
[ 1.306441] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 1.306447] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst
[ 1.306747] scsi host0: ahci
[ 1.306826] ata1: SATA max UDMA/133 abar m2048@0xbb12c000 port 0xbb12c100 irq 127
[ 1.306881] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.306897] ehci-pci: EHCI PCI platform driver
[ 1.306908] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.306911] ohci-pci: OHCI PCI platform driver
[ 1.306918] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.306958] usbcore: registered new interface driver usbserial_generic
[ 1.306963] usbserial: USB Serial support registered for generic
[ 1.307046] rtc_cmos 00:04: RTC can wake from S4
[ 1.308107] rtc_cmos 00:04: registered as rtc0
[ 1.308359] rtc_cmos 00:04: setting system clock to 2021-09-10T08:51:11 UTC (1631263871)
[ 1.308379] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[ 1.308544] intel_pstate: Intel P-state driver initializing
[ 1.308988] intel_pstate: HWP enabled
[ 1.309013] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.309080] hid: raw HID events driver (C) Jiri Kosina
[ 1.309110] intel_pmc_core INT33A1:00: initialized
[ 1.309147] drop_monitor: Initializing network drop monitor service
[ 1.309183] Initializing XFRM netlink socket
[ 1.309239] NET: Registered protocol family 10
[ 1.314251] nvme nvme0: 8/0/0 default/read/poll queues
[ 1.316382] nvme0n1: p1 p2 p3 p4 p5 p6
[ 1.323635] Freeing initrd memory: 8056K
[ 1.326838] Segment Routing with IPv6
[ 1.326839] RPL Segment Routing with IPv6
[ 1.326855] NET: Registered protocol family 17
[ 1.327458] microcode: sig=0x806ec, pf=0x4, revision=0xca
[ 1.327584] microcode: Microcode Update Driver: v2.2.
[ 1.327587] IPI shorthand broadcast: enabled
[ 1.327595] sched_clock: Marking stable (1323034938, 4343612)->(1482833269, -155454719)
[ 1.327777] registered taskstats version 1
[ 1.327785] Loading compiled-in X.509 certificates
[ 1.329293] Loaded X.509 cert 'Build time autogenerated kernel key: 907cfbedfbeb3d0d9cd58b4833914b9c12c54c8a'
[ 1.329528] zswap: loaded using pool lz4/z3fold
[ 1.329653] Key type ._fscrypt registered
[ 1.329654] Key type .fscrypt registered
[ 1.329655] Key type fscrypt-provisioning registered
[ 1.329825] PM: Magic number: 5:954:876
[ 1.329954] RAS: Correctable Errors collector initialized.
[ 1.620265] ata1: SATA link down (SStatus 4 SControl 300)
[ 1.622011] Freeing unused decrypted memory: 2036K
[ 1.622493] Freeing unused kernel image (initmem) memory: 1796K
[ 1.622497] Write protecting the kernel read-only data: 26624k
[ 1.623376] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 1.623760] Freeing unused kernel image (rodata/data gap) memory: 1156K
[ 1.646371] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.646376] rodata_test: all tests were successful
[ 1.646381] Run /init as init process
[ 1.646383] with arguments:
[ 1.646384] /init
[ 1.646386] with environment:
[ 1.646387] HOME=/
[ 1.646388] TERM=linux
[ 1.646389] BOOT_IMAGE=/boot/vmlinuz-linux
[ 1.742401] fbcon: Taking over console
[ 1.742442] Console: switching to colour frame buffer device 240x67
[ 1.796183] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.796191] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.796692] i8042: PNP: PS/2 Controller [PNP0303:KBD0] at 0x60,0x64 irq 1
[ 1.796695] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.797101] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.797271] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[ 1.797438] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 1.797442] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.797444] usb usb1: Product: xHCI Host Controller
[ 1.797445] usb usb1: Manufacturer: Linux 5.13.13-arch1-1 xhci-hcd
[ 1.797447] usb usb1: SerialNumber: 0000:00:14.0
[ 1.797544] hub 1-0:1.0: USB hub found
[ 1.797560] hub 1-0:1.0: 12 ports detected
[ 1.798772] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.798775] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.798777] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.798799] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
[ 1.798800] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.798801] usb usb2: Product: xHCI Host Controller
[ 1.798802] usb usb2: Manufacturer: Linux 5.13.13-arch1-1 xhci-hcd
[ 1.798803] usb usb2: SerialNumber: 0000:00:14.0
[ 1.798860] hub 2-0:1.0: USB hub found
[ 1.798868] hub 2-0:1.0: 6 ports detected
[ 1.799271] usb: port power management may be unreliable
[ 1.819744] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.855672] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 1.955347] systemd[1]: systemd 249.4-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 1.970538] systemd[1]: Detected architecture x86-64.
[ 1.971192] systemd[1]: Hostname set to <solid>.
[ 2.046648] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 2.110807] systemd[1]: Queued start job for default target Graphical Interface.
[ 2.111755] systemd[1]: Created slice Slice /system/getty.
[ 2.111972] systemd[1]: Created slice Slice /system/modprobe.
[ 2.112190] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 2.112337] systemd[1]: Created slice User and Session Slice.
[ 2.112408] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.112472] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.112591] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.112652] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.112689] systemd[1]: Reached target Login Prompts.
[ 2.112727] systemd[1]: Reached target Path Units.
[ 2.112761] systemd[1]: Reached target Remote File Systems.
[ 2.112794] systemd[1]: Reached target Slice Units.
[ 2.112834] systemd[1]: Reached target Local Verity Integrity Protected Volumes.
[ 2.112902] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.113082] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.113885] systemd[1]: Listening on Process Core Dump Socket.
[ 2.114010] systemd[1]: Listening on Journal Audit Socket.
[ 2.114099] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.114187] systemd[1]: Listening on Journal Socket.
[ 2.114381] systemd[1]: Listening on udev Control Socket.
[ 2.114459] systemd[1]: Listening on udev Kernel Socket.
[ 2.114935] systemd[1]: Mounting Huge Pages File System...
[ 2.115379] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.115856] systemd[1]: Mounting Kernel Debug File System...
[ 2.116296] systemd[1]: Mounting Kernel Trace File System...
[ 2.116849] systemd[1]: Starting Create List of Static Device Nodes...
[ 2.117255] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 2.117716] systemd[1]: Starting Load Kernel Module configfs...
[ 2.118157] systemd[1]: Starting Load Kernel Module drm...
[ 2.118626] systemd[1]: Starting Load Kernel Module fuse...
[ 2.119588] systemd[1]: Starting Set Up Additional Binary Formats...
[ 2.119684] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 2.120681] systemd[1]: Starting Journal Service...
[ 2.120924] Linux agpgart interface v0.103
[ 2.121699] systemd[1]: Starting Load Kernel Modules...
[ 2.122455] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.122581] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 2.123117] systemd[1]: Starting Coldplug All udev Devices...
[ 2.124543] systemd[1]: Mounted Huge Pages File System.
[ 2.124697] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.124825] systemd[1]: Mounted Kernel Debug File System.
[ 2.124952] systemd[1]: Mounted Kernel Trace File System.
[ 2.125262] systemd[1]: Finished Create List of Static Device Nodes.
[ 2.125325] fuse: init (API version 7.34)
[ 2.125580] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 2.125734] systemd[1]: Finished Load Kernel Module configfs.
[ 2.125922] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 2.126028] systemd[1]: Finished Load Kernel Module fuse.
[ 2.126136] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 229 (systemd-binfmt)
[ 2.126622] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 2.127010] EXT4-fs (nvme0n1p2): re-mounted. Opts: (null). Quota mode: none.
[ 2.127236] systemd[1]: Mounting FUSE Control File System...
[ 2.127882] systemd[1]: Mounting Kernel Configuration File System...
[ 2.129224] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.129326] audit: type=1130 audit(1631263872.316:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.129664] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 2.129778] systemd[1]: Mounted FUSE Control File System.
[ 2.129864] systemd[1]: Mounted Kernel Configuration File System.
[ 2.130004] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 2.130630] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 2.131134] systemd[1]: Starting Load/Save Random Seed...
[ 2.131819] systemd[1]: Starting Create System Users...
[ 2.132298] systemd[1]: Finished Set Up Additional Binary Formats.
[ 2.132399] audit: type=1130 audit(1631263872.319:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.137029] systemd[1]: Finished Load/Save Random Seed.
[ 2.137101] audit: type=1130 audit(1631263872.326:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.137158] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 2.138012] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 2.138147] systemd[1]: Finished Load Kernel Module drm.
[ 2.138206] audit: type=1130 audit(1631263872.326:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.138210] audit: type=1131 audit(1631263872.326:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.145024] vboxdrv: loading out-of-tree module taints kernel.
[ 2.145150] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 2.146872] vboxdrv: Found 8 processor cores
[ 2.148911] systemd[1]: Started Journal Service.
[ 2.148994] audit: type=1130 audit(1631263872.336:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.152558] systemd-journald[230]: Received client request to flush runtime journal.
[ 2.168035] audit: type=1130 audit(1631263872.356:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.169044] audit: type=1130 audit(1631263872.356:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.170282] vboxdrv: TSC mode is Invariant, tentative frequency 2299967873 Hz
[ 2.170283] vboxdrv: Successfully loaded version 6.1.26 r145957 (interface 0x00300000)
[ 2.172566] VBoxNetAdp: Successfully started.
[ 2.175941] VBoxNetFlt: Successfully started.
[ 2.176810] audit: type=1130 audit(1631263872.366:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.188866] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.01
[ 2.188869] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.188870] usb 1-1: Product: USB Receiver
[ 2.188871] usb 1-1: Manufacturer: Logitech
[ 2.256089] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20210331/nsprepkg-94)
[ 2.259346] input: Intel HID events as /devices/platform/INT33D5:00/input/input3
[ 2.259496] intel-hid INT33D5:00: platform supports 5 button array
[ 2.259523] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input4
[ 2.268371] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[ 2.268374] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[ 2.268375] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[ 2.268376] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[ 2.268473] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 2.268594] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 2.268658] acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 2.293296] tsc: Refined TSC clocksource calibration: 2303.999 MHz
[ 2.293301] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f6faae8, max_idle_ns: 440795313647 ns
[ 2.293340] clocksource: Switched to clocksource tsc
[ 2.313329] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[ 2.330914] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 2.330938] intel_rapl_common: Found RAPL domain package
[ 2.330939] intel_rapl_common: Found RAPL domain dram
[ 2.441819] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.445416] mei_me 0000:00:16.0: hbm: dma setup response: failure = 3 REJECTED
[ 2.455068] usb 1-5: New USB device found, idVendor=1c7a, idProduct=0570, bcdDevice=10.41
[ 2.455071] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.455073] usb 1-5: Product: EgisTec Touch Fingerprint Sensor
[ 2.455074] usb 1-5: Manufacturer: EgisTec
[ 2.455075] usb 1-5: SerialNumber: 0E1474CC
[ 2.456626] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[ 2.456890] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 2.476692] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[ 2.477207] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 2.496620] intel-lpss 0000:00:19.0: enabling device (0004 -> 0006)
[ 2.530335] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.532650] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.533397] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.533399] cfg80211: failed to load regulatory.db
[ 2.559666] input: ELAN0504:00 04F3:3091 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input5
[ 2.559733] input: ELAN0504:00 04F3:3091 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input7
[ 2.559774] hid-generic 0018:04F3:3091.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0504:00 04F3:3091] on i2c-ELAN0504:00
[ 2.579949] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[ 2.609956] Adding 8388604k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:8388604k SSFS
[ 2.612953] Intel(R) Wireless WiFi driver for Linux
[ 2.614620] checking generic (c0000000 7f0000) vs hw (b5000000 1000000)
[ 2.614624] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[ 2.614625] fb0: switching to inteldrmfb from EFI VGA
[ 2.614681] Console: switching to colour dummy device 80x25
[ 2.614716] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.616382] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[ 2.616399] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[ 2.616655] iwlwifi 0000:00:14.3: loaded firmware version 63.c04f3485.0 QuZ-a0-hr-b0-63.ucode op_mode iwlmvm
[ 2.616931] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.620176] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 2.632859] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 2.635255] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.635767] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 2.635891] ACPI: video: [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
[ 2.635902] ACPI: video: Video Device [PXSX] (multi-head: yes rom: yes post: no)
[ 2.635926] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:42/LNXVIDEO:01/input/input9
[ 2.646711] fbcon: i915drmfb (fb0) is primary device
[ 2.649018] Console: switching to colour frame buffer device 240x67
[ 2.670309] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 2.686991] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 2.717964] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.718146] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.720139] i2c i2c-8: 2/2 memory slots populated (from DMI)
[ 2.735081] usb 1-7: New USB device found, idVendor=04f2, idProduct=b5c5, bcdDevice=96.18
[ 2.735087] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.735089] usb 1-7: Product: HD WebCam
[ 2.735090] usb 1-7: Manufacturer: Generic
[ 2.735091] usb 1-7: SerialNumber: 200901010001
[ 2.737608] intel-spi 0000:00:1f.5: mx25l12805d (16384 Kbytes)
[ 2.737732] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.737734] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.737735] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.737736] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.737737] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.737738] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.740895] cryptd: max_cpu_qlen set to 1000
[ 2.750183] Creating 1 MTD partitions on "0000:00:1f.5":
[ 2.750187] 0x000000000000-0x000001000000 : "BIOS"
[ 2.806968] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x354
[ 2.807341] AVX2 version of gcm_enc/dec engaged.
[ 2.807382] AES CTR mode by8 optimization enabled
[ 2.819583] thermal thermal_zone6: failed to read out thermal zone (-61)
[ 2.827780] snd_hda_intel 0000:00:1f.3: dmic_detect option is deprecated, pass snd-intel-dspcfg.dsp_driver=1 option instead
[ 2.827816] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.828051] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.856666] usb 1-10: new full-speed USB device number 5 using xhci_hcd
[ 2.957759] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 2.957804] acer_wmi: Function bitmap for Communication Button: 0x0
[ 2.971785] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2.971793] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.971796] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 2.971799] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.971801] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.983080] input: Acer WMI hotkeys as /devices/virtual/input/input11
[ 2.992905] iwlwifi 0000:00:14.3: base HW address: 0c:dd:24:c8:7a:b2
[ 2.997963] usb 1-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[ 2.997971] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.022202] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 3.046876] intel_rapl_common: Found RAPL domain package
[ 3.046879] intel_rapl_common: Found RAPL domain core
[ 3.046880] intel_rapl_common: Found RAPL domain uncore
[ 3.046881] intel_rapl_common: Found RAPL domain dram
[ 3.046882] intel_rapl_common: Found RAPL domain psys
[ 3.071570] intel_tcc_cooling: Programmable TCC Offset detected
[ 3.073737] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C52B.0002/input/input18
[ 3.074500] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 3.092881] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
[ 3.096721] iTCO_vendor_support: vendor-support=0
[ 3.116224] input: ELAN0504:00 04F3:3091 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input19
[ 3.117027] mc: Linux media interface: v0.10
[ 3.118759] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[ 3.118882] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.127131] videodev: Linux video capture interface: v2.00
[ 3.163482] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 3.163483] hid-generic 0003:046D:C52B.0002: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[ 3.163540] input: ELAN0504:00 04F3:3091 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input21
[ 3.163601] hid-multitouch 0018:04F3:3091.0001: input,hidraw1: I2C HID v1.00 Mouse [ELAN0504:00 04F3:3091] on i2c-ELAN0504:00
[ 3.163621] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 3.163731] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 3.163762] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 3.163788] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 3.165297] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52B.0003/input/input22
[ 3.165379] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52B.0003/input/input23
[ 3.178007] usb 1-7: Found UVC 1.00 device HD WebCam (04f2:b5c5)
[ 3.180858] Bluetooth: Core ver 2.22
[ 3.180877] NET: Registered protocol family 31
[ 3.180878] Bluetooth: HCI device and connection manager initialized
[ 3.180881] Bluetooth: HCI socket layer initialized
[ 3.180883] Bluetooth: L2CAP socket layer initialized
[ 3.180887] Bluetooth: SCO socket layer initialized
[ 3.182249] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input26
[ 3.189809] usbcore: registered new interface driver btusb
[ 3.190585] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018
[ 3.191594] Bluetooth: hci0: Device revision is 2
[ 3.191597] Bluetooth: hci0: Secure boot is enabled
[ 3.191598] Bluetooth: hci0: OTP lock is enabled
[ 3.191599] Bluetooth: hci0: API lock is enabled
[ 3.191600] Bluetooth: hci0: Debug lock is disabled
[ 3.191601] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 3.193258] Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi
[ 3.220003] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52B.0003/input/input24
[ 3.220065] mousedev: PS/2 mouse device common for all mice
[ 3.220093] usbcore: registered new interface driver uvcvideo
[ 3.220145] hid-generic 0003:046D:C52B.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[ 3.221504] hid-generic 0003:046D:C52B.0004: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
[ 3.221532] usbcore: registered new interface driver usbhid
[ 3.221534] usbhid: USB HID core driver
[ 3.280139] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.280142] Bluetooth: BNEP filters: protocol multicast
[ 3.280145] Bluetooth: BNEP socket layer initialized
[ 3.454916] nvidia: module license 'NVIDIA' taints kernel.
[ 3.454919] Disabling lock debugging due to kernel taint
[ 3.504700] nvidia-nvlink: Nvlink Core is being initialized, major device number 511
[ 3.505117] nvidia 0000:06:00.0: enabling device (0006 -> 0007)
[ 3.533792] logitech-djreceiver 0003:046D:C52B.0004: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
[ 3.621753] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 470.63.01 Tue Aug 3 20:44:16 UTC 2021
[ 3.647812] input: Logitech Wireless Device PID:4080 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4080.0005/input/input27
[ 3.647894] hid-generic 0003:046D:4080.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Device PID:4080] on usb-0000:00:14.0-1/input2:5
[ 3.649940] input: Logitech Wireless Device PID:1017 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:1017.0006/input/input31
[ 3.650023] hid-generic 0003:046D:1017.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Device PID:1017] on usb-0000:00:14.0-1/input2:1
[ 3.651738] input: Logitech Wireless Device PID:4055 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4055.0007/input/input35
[ 3.651827] hid-generic 0003:046D:4055.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Device PID:4055] on usb-0000:00:14.0-1/input2:2
[ 3.653778] input: Logitech Wireless Device PID:4003 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4003.0008/input/input39
[ 3.653892] hid-generic 0003:046D:4003.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4003] on usb-0000:00:14.0-1/input2:3
[ 3.655810] input: Logitech Wireless Device PID:4061 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4061.0009/input/input43
[ 3.655922] hid-generic 0003:046D:4061.0009: input,hidraw6: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4061] on usb-0000:00:14.0-1/input2:4
[ 3.720802] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 470.63.01 Tue Aug 3 20:30:55 UTC 2021
[ 3.724972] [drm] [nvidia-drm] [GPU ID 0x00000600] Loading driver
[ 3.724974] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:06:00.0 on minor 1
[ 3.767691] input: Logitech M350 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4080.0005/input/input47
[ 3.767792] logitech-hidpp-device 0003:046D:4080.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M350] on usb-0000:00:14.0-1/input2:5
[ 3.829593] input: Logitech Anywhere MX as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:1017.0006/input/input48
[ 3.829642] logitech-hidpp-device 0003:046D:1017.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Anywhere MX] on usb-0000:00:14.0-1/input2:1
[ 3.913605] input: Logitech Wireless Device PID:4055 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4055.0007/input/input49
[ 3.913783] logitech-hidpp-device 0003:046D:4055.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Device PID:4055] on usb-0000:00:14.0-1/input2:2
[ 4.055665] input: Logitech K270 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4003.0008/input/input50
[ 4.055779] logitech-hidpp-device 0003:046D:4003.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:14.0-1/input2:3
[ 4.183655] input: Logitech K370s/K375s as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4061.0009/input/input51
[ 4.183747] logitech-hidpp-device 0003:046D:4061.0009: input,hidraw6: USB HID v1.11 Keyboard [Logitech K370s/K375s] on usb-0000:00:14.0-1/input2:4
[ 4.797001] Bluetooth: hci0: Waiting for firmware download to complete
[ 4.798569] Bluetooth: hci0: Firmware loaded in 1567742 usecs
[ 4.798615] Bluetooth: hci0: Waiting for device to boot
[ 4.813572] Bluetooth: hci0: Device booted in 14637 usecs
[ 4.813760] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc
[ 4.815575] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 4.818583] Bluetooth: hci0: Firmware revision 0.0 build 191 week 21 2021
[ 4.857697] rfkill: input handler disabled
[ 4.878577] Bluetooth: hci0: MSFT filter_enable is already on
[ 4.879912] NET: Registered protocol family 38
[ 6.648264] wlp0s20f3: authenticate with a0:63:91:a6:7c:ee
[ 6.655399] wlp0s20f3: send auth to a0:63:91:a6:7c:ee (try 1/3)
[ 6.682236] wlp0s20f3: authenticated
[ 6.683265] wlp0s20f3: associate with a0:63:91:a6:7c:ee (try 1/3)
[ 6.685261] wlp0s20f3: RX AssocResp from a0:63:91:a6:7c:ee (capab=0x411 status=0 aid=4)
[ 6.690571] wlp0s20f3: associated
[ 6.824439] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[ 7.235698] logitech-hidpp-device 0003:046D:4080.0005: HID++ 4.5 device connected.
[ 8.198857] kauditd_printk_skb: 66 callbacks suppressed
[ 8.198865] audit: type=1131 audit(1631263878.385:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 9.448153] logitech-hidpp-device 0003:046D:4061.0009: HID++ 4.5 device connected.
[ 13.523977] audit: type=1100 audit(1631263883.712:72): pid=909 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="user" exe="/usr/lib/gdm-session-worker" hostname=solid addr=? terminal=/dev/tty1 res=success'
[ 13.525664] audit: type=1101 audit(1631263883.712:73): pid=909 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="user" exe="/usr/lib/gdm-session-worker" hostname=solid addr=? terminal=/dev/tty1 res=success'
[ 13.526832] audit: type=1103 audit(1631263883.715:74): pid=909 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="user" exe="/usr/lib/gdm-session-worker" hostname=solid addr=? terminal=/dev/tty1 res=success'
[ 13.530274] audit: type=1006 audit(1631263883.718:75): pid=909 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[ 13.530279] audit: type=1300 audit(1631263883.718:75): arch=c000003e syscall=1 success=yes exit=4 a0=a a1=7ffe9a58c720 a2=4 a3=3e8 items=0 ppid=367 pid=909 auid=1000 uid=0 gid=1000 euid=0 suid=0 fsuid=0 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=3 comm="gdm-session-wor" exe="/usr/lib/gdm-session-worker" key=(null)
[ 13.530282] audit: type=1327 audit(1631263883.718:75): proctitle=67646D2D73657373696F6E2D776F726B6572205B70616D2F67646D2D70617373776F72645D
[ 13.542487] audit: type=1130 audit(1631263883.728:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.546648] audit: type=1101 audit(1631263883.735:77): pid=918 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="user" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.546652] audit: type=1103 audit(1631263883.735:78): pid=918 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="user" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 13.546712] audit: type=1006 audit(1631263883.735:79): pid=918 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
[ 14.037981] rfkill: input handler enabled
[ 14.162698] ACPI Warning: \_SB.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20210331/nsarguments-61)
[ 16.032798] Bluetooth: RFCOMM TTY layer initialized
[ 16.032809] Bluetooth: RFCOMM socket layer initialized
[ 16.032814] Bluetooth: RFCOMM ver 1.11
[ 25.446380] kauditd_printk_skb: 22 callbacks suppressed
[ 25.446389] audit: type=1106 audit(1631263895.635:97): pid=488 uid=0 auid=120 ses=1 msg='op=PAM:session_close grantors=pam_loginuid,pam_keyinit,pam_succeed_if,pam_permit,pam_systemd,pam_env acct="gdm" exe="/usr/lib/gdm-session-worker" hostname=solid addr=? terminal=/dev/tty1 res=success'
[ 25.446556] audit: type=1104 audit(1631263895.635:98): pid=488 uid=0 auid=120 ses=1 msg='op=PAM:setcred grantors=pam_permit acct="gdm" exe="/usr/lib/gdm-session-worker" hostname=solid addr=? terminal=/dev/tty1 res=success'
[ 34.930473] audit: type=1131 audit(1631263905.119:99): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 34.943431] audit: type=1131 audit(1631263905.132:100): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 35.022681] audit: type=1334 audit(1631263905.212:101): prog-id=26 op=UNLOAD
[ 35.022722] audit: type=1334 audit(1631263905.212:102): prog-id=25 op=UNLOAD
[ 35.022728] audit: type=1334 audit(1631263905.212:103): prog-id=24 op=UNLOAD
[ 35.155893] audit: type=1334 audit(1631263905.346:104): prog-id=23 op=UNLOAD
[ 35.155902] audit: type=1334 audit(1631263905.346:105): prog-id=22 op=UNLOAD
[ 35.155906] audit: type=1334 audit(1631263905.346:106): prog-id=21 op=UNLOAD
[ 35.657501] audit: type=1131 audit(1631263905.846:107): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 35.664202] audit: type=1131 audit(1631263905.852:108): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 47.822657] audit: type=1131 audit(1631263918.013:109): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=blueman-mechanism comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 65.046120] audit: type=1131 audit(1631263935.237:110): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 241.002308] audit: type=1100 audit(1631264111.058:111): pid=1612 uid=1000 auid=1000 ses=3 msg='op=PAM:authentication grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 241.002312] audit: type=1101 audit(1631264111.058:112): pid=1612 uid=1000 auid=1000 ses=3 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 241.002640] audit: type=1103 audit(1631264111.058:113): pid=1612 uid=1000 auid=1000 ses=3 msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 241.002710] audit: type=1105 audit(1631264111.058:114): pid=1612 uid=1000 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 917.655088] audit: type=1130 audit(1631264787.721:115): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 917.655092] audit: type=1131 audit(1631264787.721:116): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 944.884103] audit: type=1100 audit(1631264814.952:117): pid=2281 uid=1000 auid=1000 ses=3 msg='op=PAM:authentication grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 944.884249] audit: type=1101 audit(1631264814.952:118): pid=2281 uid=1000 auid=1000 ses=3 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 944.884842] audit: type=1103 audit(1631264814.952:119): pid=2281 uid=1000 auid=1000 ses=3 msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 944.885126] audit: type=1105 audit(1631264814.952:120): pid=2281 uid=1000 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 950.716796] loop: module loaded
[ 950.802393] loop0: detected capacity change from 0 to 6104576
[ 950.831036] FAT-fs (loop0): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 950.845962] audit: type=1106 audit(1631264820.912:121): pid=2281 uid=1000 auid=1000 ses=3 msg='op=PAM:session_close grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 950.845966] audit: type=1104 audit(1631264820.912:122): pid=2281 uid=1000 auid=1000 ses=3 msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/1 res=success'
[root@solid etc]# Xorg.log shows some errors, but there is no problems with graphics on internal laptop display so it doesn't look like a problem for me:
[ 171.520] (II) LoadModule: "nvidia"
[ 171.520] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 171.520] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 171.520] compiled for 1.6.99.901, module version = 1.0.0
[ 171.520] Module class: X.Org Video Driver
[ 171.520] (II) LoadModule: "nouveau"
[ 171.520] (WW) Warning, couldn't open module nouveau
[ 171.520] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 171.520] (II) LoadModule: "nv"
[ 171.520] (WW) Warning, couldn't open module nv
[ 171.520] (EE) Failed to load module "nv" (module does not exist, 0)
[ 171.520] (II) LoadModule: "intel"
[ 171.521] (WW) Warning, couldn't open module intel
[ 171.521] (EE) Failed to load module "intel" (module does not exist, 0)
[ 171.521] (II) LoadModule: "modesetting"
[ 171.521] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 171.521] (II) Module modesetting: vendor="X.Org Foundation"
[ 171.521] compiled for 1.20.13, module version = 1.20.13
[ 171.521] Module class: X.Org Video Driver
[ 171.521] ABI class: X.Org Video Driver, version 24.1
[ 171.521] (II) LoadModule: "fbdev"
[ 171.521] (WW) Warning, couldn't open module fbdev
[ 171.521] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 171.521] (II) LoadModule: "vesa"
[ 171.521] (WW) Warning, couldn't open module vesa
[ 171.521] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 171.521] (II) NVIDIA dlloader X Driver 470.63.01 Tue Aug 3 20:37:27 UTC 2021
[ 171.521] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 171.521] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 171.521] (II) systemd-logind: releasing fd for 226:1
[ 171.522] (II) Loading sub module "fb"
[ 171.522] (II) LoadModule: "fb"I'm a bit lost now as package rollback didn't help me... Can you give me advice how to proceed?
I have only suspect that my login manager seems to be gdm (need to re-check) and there might be some mess with Wayland... But I have no experience with Wayland.
Last edited by FuzzySPb (2021-09-15 20:08:59)
Offline
#2 2021-09-10 09:47:08
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
Small update.
I found following in dmesg output after connection of HDMI cable when "Displays" window appears:
[ 3202.394145] snd_hda_intel 0000:00:1f.3: refused to change power state from D3hot to D0
[ 3202.514786] snd_hda_intel 0000:00:1f.3: CORB reset timeout#2, CORBRP = 65535
[ 3202.787578] snd_hda_codec_hdmi hdaudioC0D2: Unable to sync register 0x2f0d00. -5
[ 3203.027570] snd_hda_codec_realtek hdaudioC0D0: Unable to sync register 0x2b8000. -5
[ 3203.027587] snd_hda_codec_realtek hdaudioC0D0: Unable to sync register 0x2b8000. -5It seems to be related with HDMI but it looks like something related with sound....
Anyway, this output appeared only once, I don't see it now when I disconnect/connect HDMI cable
Last edited by FuzzySPb (2021-09-10 09:51:18)
Offline
#3 2021-09-10 10:27:16
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
Ok, finally I found at least one small indication of the problem:
screenshot
I noticed that my external monitor has status "Disabled" in XFCE Display selection. I have no idea what it means and how to fix it.
It seems I occasionally noticed it when display was disconnected. Or I fixed it after changes of XFCE display conf. Anyway, now there is no "Disabled" line but problem is still the same - 2nd screen is black...
Here is xrandr output at the same time:
[user@solid ~]$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
1920x1080 60.01*+ 60.01 59.97 59.96 59.93
1680x1050 59.95 59.88
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 59.98
800x450 59.95 59.82
640x512 60.02
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
640x400 59.88 59.98
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
HDMI-1 connected (normal left inverted right x axis y axis)
1920x1200 59.95 +
1920x1080 60.00 50.00 59.94
1920x1080i 60.00 50.00 59.94
1600x1200 60.00
1680x1050 59.88
1280x1024 60.02
1440x900 59.90
1280x960 60.00
1280x720 60.00 50.00 59.94
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 60.00 59.94
[user@solid ~]$ Last edited by FuzzySPb (2021-09-10 18:12:32)
Offline
#4 2021-09-10 11:38:05
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
Ok, finally problem became even more strange....
So, I have Acer Swift 3 laptop with Intel and Nvidia graphics. I use 2nd monitor HP ZR2440w via HDMI with it and another laptop.
I tried following combinations:
a) Another laptop with HP ZR2440w - it works
b) Acer Swift with HP ZR2440w under Windows - it works
c) Acer Swift with HP ZR2440w under Linux - monitor is detected, signal is present but sceen is black.
d) Acer Switt with another monitor under Linux - it works.
The problem started only today after installation of recent linux and nvidia updates. But I rolled these packages back already and nothing have changed.
And somehow problem is present only under ArchLinux and only with HP ZR2440w.... Aaaarrrrggh! I have no idea where to dig next.... It have worked almost for 2 years without any problem until today...
Last edited by FuzzySPb (2021-09-10 11:40:46)
Offline
#5 2021-09-10 11:43:21
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,720
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
That kind of randomness suggests to me that it's a KMS/early loading race issue: https://wiki.archlinux.org/title/Kernel … _KMS_start
I suggest you then follow that link and add both all the nvidia modules and the i915 module there, then update everything again (which should regenerate your images). If that didn't help, post a complete xorg log.
Last edited by V1del (2021-09-10 11:44:54)
Offline
#6 2021-09-10 12:09:56
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
V1del wrote:
That kind of randomness suggests to me that it's a KMS/early loading race issue: https://wiki.archlinux.org/title/Kernel … _KMS_start
I suggest you then follow that link and add both all the nvidia modules and the i915 module there, then update everything again (which should regenerate your images). If that didn't help, post a complete xorg log.
Thanks for the feedback. I already tried it but only for nvidia modules (it didn't help). Ok, I'll try with intel+nvidia as well and report it here.
Last edited by FuzzySPb (2021-09-10 12:11:20)
Offline
#7 2021-09-10 12:38:26
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
Ok, I tried it. "(nvidia nvidia_modeset nvidia_uvm nvidia_drm i915)" was added to MODULES line in /etc/mkinitcpio.conf. They I reinstalled linux and nvidia. Modules were rebuilt.
Behaviour haven't changed. Just one more observation:
- if my choice is "Mirror display" - screen resolution of laptop display changes, i.e. it tries to align it with resolution of external monitor;
- if my choise is "Extend to the right" - it seems screen area is really extended as I can move mouse cursor beyond right border of the screen (but not left, top or bottom).
Somehow I have 2 Xorg.logs...
1) /var/log/Xorg.0.log
[ 2.751] (--) Log file renamed from "/var/log/Xorg.pid-537.log" to "/var/log/Xorg.0.log"
[ 2.752] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 2.752]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[ 2.752] Build Operating System: Linux Archlinux
[ 2.752] Current Operating System: Linux solid 5.14.2-arch1-2 #1 SMP PREEMPT Thu, 09 Sep 2021 09:42:35 +0000 x86_64
[ 2.752] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3afe0d83-05c4-4142-a08c-7c18b193c6fc rw loglevel=3 snd_hda_intel.dmic_detect=0
[ 2.752] Build Date: 04 August 2021 08:13:54AM
[ 2.752]
[ 2.752] Current version of pixman: 0.40.0
[ 2.752] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.752] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.752] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 10 15:22:48 2021
[ 2.754] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2.754] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2.755] (==) No Layout section. Using the first Screen section.
[ 2.755] (==) No screen section available. Using defaults.
[ 2.755] (**) |-->Screen "Default Screen Section" (0)
[ 2.755] (**) | |-->Monitor "<default monitor>"
[ 2.755] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2.755] (==) Automatically adding devices
[ 2.755] (==) Automatically enabling devices
[ 2.755] (==) Automatically adding GPU devices
[ 2.755] (==) Automatically binding GPU devices
[ 2.755] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 2.756] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 2.756] Entry deleted from font path.
[ 2.757] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 2.757] Entry deleted from font path.
[ 2.757] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 2.757] Entry deleted from font path.
[ 2.757] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 2.757] Entry deleted from font path.
[ 2.757] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 2.757] Entry deleted from font path.
[ 2.757] (==) FontPath set to:
/usr/share/fonts/TTF
[ 2.757] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.757] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.757] (II) Module ABI versions:
[ 2.757] X.Org ANSI C Emulation: 0.4
[ 2.757] X.Org Video Driver: 24.1
[ 2.757] X.Org XInput driver : 24.1
[ 2.757] X.Org Server Extension : 10.0
[ 2.757] (++) using VT number 1
[ 2.759] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 2.759] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 2.760] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
[ 2.760] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2.761] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[ 2.762] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 2.763] (--) PCI:*(0@0:2:0) 8086:9b41:1025:1410 rev 2, Mem @ 0xb5000000/16777216, 0xc0000000/268435456, I/O @ 0x00007000/64, BIOS @ 0x????????/131072
[ 2.763] (--) PCI: (6@0:0:0) 10de:1d13:1025:1410 rev 161, Mem @ 0xb9000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 2.763] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2.763] (II) LoadModule: "glx"
[ 2.769] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2.774] (II) Module glx: vendor="X.Org Foundation"
[ 2.774] compiled for 1.20.13, module version = 1.0.0
[ 2.774] ABI class: X.Org Server Extension, version 10.0
[ 2.774] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 2.774] loading driver: nvidia
[ 2.774] (==) Matched intel as autoconfigured driver 0
[ 2.774] (==) Matched nvidia as autoconfigured driver 1
[ 2.774] (==) Matched nouveau as autoconfigured driver 2
[ 2.774] (==) Matched nv as autoconfigured driver 3
[ 2.774] (==) Matched modesetting as autoconfigured driver 4
[ 2.774] (==) Matched fbdev as autoconfigured driver 5
[ 2.774] (==) Matched vesa as autoconfigured driver 6
[ 2.774] (==) Assigned the driver to the xf86ConfigLayout
[ 2.774] (II) LoadModule: "intel"
[ 2.775] (WW) Warning, couldn't open module intel
[ 2.775] (EE) Failed to load module "intel" (module does not exist, 0)
[ 2.775] (II) LoadModule: "nvidia"
[ 2.775] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2.779] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2.779] compiled for 1.6.99.901, module version = 1.0.0
[ 2.779] Module class: X.Org Video Driver
[ 2.779] (II) LoadModule: "nouveau"
[ 2.779] (WW) Warning, couldn't open module nouveau
[ 2.779] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 2.779] (II) LoadModule: "nv"
[ 2.779] (WW) Warning, couldn't open module nv
[ 2.779] (EE) Failed to load module "nv" (module does not exist, 0)
[ 2.779] (II) LoadModule: "modesetting"
[ 2.779] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2.782] (II) Module modesetting: vendor="X.Org Foundation"
[ 2.782] compiled for 1.20.13, module version = 1.20.13
[ 2.782] Module class: X.Org Video Driver
[ 2.782] ABI class: X.Org Video Driver, version 24.1
[ 2.782] (II) LoadModule: "fbdev"
[ 2.782] (WW) Warning, couldn't open module fbdev
[ 2.782] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2.782] (II) LoadModule: "vesa"
[ 2.782] (WW) Warning, couldn't open module vesa
[ 2.782] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2.782] (II) NVIDIA dlloader X Driver 470.63.01 Tue Aug 3 20:37:27 UTC 2021
[ 2.782] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2.783] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2.783] (II) modeset(0): using drv /dev/dri/card1
[ 2.783] (II) systemd-logind: releasing fd for 226:0
[ 2.783] (II) Loading sub module "fb"
[ 2.783] (II) LoadModule: "fb"
[ 2.783] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2.784] (II) Module fb: vendor="X.Org Foundation"
[ 2.784] compiled for 1.20.13, module version = 1.0.0
[ 2.784] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.784] (II) Loading sub module "wfb"
[ 2.784] (II) LoadModule: "wfb"
[ 2.784] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2.785] (II) Module wfb: vendor="X.Org Foundation"
[ 2.785] compiled for 1.20.13, module version = 1.0.0
[ 2.785] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.785] (II) Loading sub module "ramdac"
[ 2.785] (II) LoadModule: "ramdac"
[ 2.785] (II) Module "ramdac" already built-in
[ 2.786] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2.786] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 2.786] (==) modeset(0): RGB weight 888
[ 2.786] (==) modeset(0): Default visual is TrueColor
[ 2.786] (II) Loading sub module "glamoregl"
[ 2.786] (II) LoadModule: "glamoregl"
[ 2.786] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 2.791] (II) Module glamoregl: vendor="X.Org Foundation"
[ 2.791] compiled for 1.20.13, module version = 1.0.1
[ 2.791] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.939] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics (CML GT2)
[ 2.939] (II) modeset(0): glamor initialized
[ 2.940] (II) modeset(0): Output eDP-1 has no monitor section
[ 2.949] (II) modeset(0): Output HDMI-1 has no monitor section
[ 2.950] (II) modeset(0): EDID for output eDP-1
[ 2.950] (II) modeset(0): Manufacturer: CMN Model: 14d4 Serial#: 0
[ 2.950] (II) modeset(0): Year: 2016 Week: 36
[ 2.950] (II) modeset(0): EDID Version: 1.4
[ 2.950] (II) modeset(0): Digital Display Input
[ 2.950] (II) modeset(0): 8 bits per channel
[ 2.950] (II) modeset(0): Digital interface is DisplayPort
[ 2.950] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 2.950] (II) modeset(0): Gamma: 2.20
[ 2.950] (II) modeset(0): No DPMS capabilities specified
[ 2.950] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 2.950] (II) modeset(0): First detailed timing is preferred mode
[ 2.950] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 2.950] (II) modeset(0): redX: 0.590 redY: 0.350 greenX: 0.330 greenY: 0.555
[ 2.950] (II) modeset(0): blueX: 0.153 blueY: 0.119 whiteX: 0.313 whiteY: 0.329
[ 2.950] (II) modeset(0): Manufacturer's mask: 0
[ 2.950] (II) modeset(0): Supported detailed timing:
[ 2.950] (II) modeset(0): clock: 152.8 MHz Image Size: 309 x 173 mm
[ 2.950] (II) modeset(0): h_active: 1920 h_sync: 2000 h_sync_end 2060 h_blank_end 2250 h_border: 0
[ 2.950] (II) modeset(0): v_active: 1080 v_sync: 1086 v_sync_end 1094 v_blanking: 1132 v_border: 0
[ 2.950] (II) modeset(0): N140HCA-EAC
[ 2.950] (II) modeset(0): CMN
[ 2.950] (II) modeset(0): N140HCA-EAC
[ 2.950] (II) modeset(0): EDID (in hex):
[ 2.950] (II) modeset(0): 00ffffffffffff000daed41400000000
[ 2.950] (II) modeset(0): 241a0104a51f11780228659759548e27
[ 2.950] (II) modeset(0): 1e505400000001010101010101010101
[ 2.950] (II) modeset(0): 010101010101b43b804a71383440503c
[ 2.950] (II) modeset(0): 680035ad10000018000000fe004e3134
[ 2.950] (II) modeset(0): 304843412d4541430a20000000fe0043
[ 2.950] (II) modeset(0): 4d4e0a202020202020202020000000fe
[ 2.950] (II) modeset(0): 004e3134304843412d4541430a200005
[ 2.951] (II) modeset(0): Printing probed modes for output eDP-1
[ 2.951] (II) modeset(0): Modeline "1920x1080"x60.0 152.84 1920 2000 2060 2250 1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[ 2.951] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 2.951] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 2.951] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 2.951] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 2.951] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 2.951] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 2.951] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 2.951] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 2.951] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 2.951] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 2.951] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 2.951] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 2.951] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 2.951] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 2.951] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 2.951] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 2.951] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 2.951] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 2.951] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2.951] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 2.951] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 2.951] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 2.951] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 2.951] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 2.951] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 2.951] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 2.951] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 2.951] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 2.951] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2.951] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2.951] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 2.951] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 2.951] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 2.951] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 2.951] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 2.951] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 2.951] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2.951] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 2.951] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 2.951] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 2.951] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 2.951] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 2.951] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 2.951] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 2.951] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 2.951] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 2.951] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 2.951] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 2.951] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 2.951] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 2.951] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 2.951] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 2.951] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 2.951] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 2.951] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 2.951] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 2.951] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 2.960] (II) modeset(0): EDID for output HDMI-1
[ 2.960] (II) modeset(0): Output eDP-1 connected
[ 2.960] (II) modeset(0): Output HDMI-1 disconnected
[ 2.960] (II) modeset(0): Using exact sizes for initial modes
[ 2.960] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 2.960] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2.960] (==) modeset(0): DPI set to (96, 96)
[ 2.960] (II) Loading sub module "fb"
[ 2.960] (II) LoadModule: "fb"
[ 2.960] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2.960] (II) Module fb: vendor="X.Org Foundation"
[ 2.960] compiled for 1.20.13, module version = 1.0.0
[ 2.960] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.960] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[ 2.960] (==) NVIDIA(G0): RGB weight 888
[ 2.960] (==) NVIDIA(G0): Default visual is TrueColor
[ 2.960] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 2.960] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 2.960] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[ 2.960] (**) NVIDIA(G0): Enabling 2D acceleration
[ 2.960] (II) Loading sub module "glxserver_nvidia"
[ 2.960] (II) LoadModule: "glxserver_nvidia"
[ 2.960] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 2.986] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 2.986] compiled for 1.6.99.901, module version = 1.0.0
[ 2.986] Module class: X.Org Server Extension
[ 2.986] (II) NVIDIA GLX Module 470.63.01 Tue Aug 3 20:35:52 UTC 2021
[ 2.987] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 3.615] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce MX250 (GP108-A) at PCI:6:0:0
[ 3.615] (II) NVIDIA(G0): (GPU-0)
[ 3.615] (--) NVIDIA(G0): Memory: 2097152 kBytes
[ 3.615] (--) NVIDIA(G0): VideoBIOS: 86.08.2a.00.85
[ 3.615] (II) NVIDIA(G0): Detected PCI Express Link width: 4X
[ 3.615] (II) NVIDIA(G0): Validated MetaModes:
[ 3.615] (II) NVIDIA(G0): "NULL"
[ 3.615] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[ 3.615] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[ 3.615] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[ 3.678] (==) modeset(0): Backing store enabled
[ 3.678] (==) modeset(0): Silken mouse disabled
[ 3.749] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 3.749] (==) modeset(0): DPMS enabled
[ 3.749] (II) modeset(0): [DRI2] Setup complete
[ 3.749] (II) modeset(0): [DRI2] DRI driver: iris
[ 3.749] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 3.749] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 3.749] (II) NVIDIA: access.
[ 3.751] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 3.751] (II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X
[ 3.751] (II) NVIDIA(G0): configuration option may not be set correctly. When the
[ 3.751] (II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will
[ 3.751] (II) NVIDIA(G0): try to use it to receive ACPI event notifications. For
[ 3.751] (II) NVIDIA(G0): details, please see the "ConnectToAcpid" and
[ 3.751] (II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 3.751] (II) NVIDIA(G0): Config Options in the README.
[ 3.764] (II) NVIDIA(G0): Setting mode "NULL"
[ 3.766] (==) NVIDIA(G0): Disabling shared memory pixmaps
[ 3.766] (==) NVIDIA(G0): Backing store enabled
[ 3.766] (==) NVIDIA(G0): Silken mouse disabled
[ 3.766] (==) NVIDIA(G0): DPMS enabled
[ 3.766] (II) Loading sub module "dri2"
[ 3.766] (II) LoadModule: "dri2"
[ 3.766] (II) Module "dri2" already built-in
[ 3.766] (II) NVIDIA(G0): [DRI2] Setup complete
[ 3.766] (II) NVIDIA(G0): [DRI2] VDPAU driver: nvidia
[ 3.766] (II) Initializing extension Generic Event Extension
[ 3.766] (II) Initializing extension SHAPE
[ 3.766] (II) Initializing extension MIT-SHM
[ 3.766] (II) Initializing extension XInputExtension
[ 3.766] (II) Initializing extension XTEST
[ 3.766] (II) Initializing extension BIG-REQUESTS
[ 3.766] (II) Initializing extension SYNC
[ 3.766] (II) Initializing extension XKEYBOARD
[ 3.766] (II) Initializing extension XC-MISC
[ 3.766] (II) Initializing extension SECURITY
[ 3.766] (II) Initializing extension XFIXES
[ 3.766] (II) Initializing extension RENDER
[ 3.766] (II) Initializing extension RANDR
[ 3.766] (II) Initializing extension COMPOSITE
[ 3.766] (II) Initializing extension DAMAGE
[ 3.766] (II) Initializing extension MIT-SCREEN-SAVER
[ 3.766] (II) Initializing extension DOUBLE-BUFFER
[ 3.766] (II) Initializing extension RECORD
[ 3.766] (II) Initializing extension DPMS
[ 3.766] (II) Initializing extension Present
[ 3.766] (II) Initializing extension DRI3
[ 3.766] (II) Initializing extension X-Resource
[ 3.766] (II) Initializing extension XVideo
[ 3.766] (II) Initializing extension XVideo-MotionCompensation
[ 3.766] (II) Initializing extension GLX
[ 3.766] (II) Initializing extension GLX
[ 3.766] (II) Indirect GLX disabled.
[ 3.770] (II) AIGLX: Loaded and initialized iris
[ 3.770] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.770] (II) Initializing extension XFree86-VidModeExtension
[ 3.770] (II) Initializing extension XFree86-DGA
[ 3.770] (II) Initializing extension XFree86-DRI
[ 3.770] (II) Initializing extension DRI2
[ 3.770] (II) Initializing extension NV-GLX
[ 3.770] (II) Initializing extension NV-CONTROL
[ 3.770] (II) modeset(0): Damage tracking initialized
[ 3.770] (II) modeset(0): Setting screen physical size to 508 x 285
[ 3.800] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 3.800] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 3.800] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.800] (II) LoadModule: "libinput"
[ 3.800] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 3.803] (II) Module libinput: vendor="X.Org Foundation"
[ 3.803] compiled for 1.20.11, module version = 1.1.0
[ 3.803] Module class: X.Org XInput Driver
[ 3.803] ABI class: X.Org XInput driver, version 24.1
[ 3.803] (II) Using input driver 'libinput' for 'Video Bus'
[ 3.803] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 36 paused 0
[ 3.803] (**) Video Bus: always reports core events
[ 3.803] (**) Option "Device" "/dev/input/event2"
[ 3.803] (**) Option "_source" "server/udev"
[ 3.809] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 3.809] (II) event2 - Video Bus: device is a keyboard
[ 3.809] (II) event2 - Video Bus: device removed
[ 3.809] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 3.809] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 3.809] (**) Option "xkb_model" "pc105"
[ 3.809] (**) Option "xkb_layout" "us,ru"
[ 3.809] (**) Option "xkb_variant" ",winkeys"
[ 3.809] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3.823] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 3.823] (II) event2 - Video Bus: device is a keyboard
[ 3.823] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 3.823] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 3.823] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.823] (II) Using input driver 'libinput' for 'Video Bus'
[ 3.824] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 39 paused 0
[ 3.824] (**) Video Bus: always reports core events
[ 3.824] (**) Option "Device" "/dev/input/event3"
[ 3.824] (**) Option "_source" "server/udev"
[ 3.824] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 3.824] (II) event3 - Video Bus: device is a keyboard
[ 3.825] (II) event3 - Video Bus: device removed
[ 3.825] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:42/LNXVIDEO:01/input/input3/event3"
[ 3.825] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3.825] (**) Option "xkb_model" "pc105"
[ 3.825] (**) Option "xkb_layout" "us,ru"
[ 3.825] (**) Option "xkb_variant" ",winkeys"
[ 3.825] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3.825] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 3.825] (II) event3 - Video Bus: device is a keyboard
[ 3.825] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 3.825] (II) No input driver specified, ignoring this device.
[ 3.825] (II) This device may have been added with another device file.
[ 3.826] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 3.826] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 3.826] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 3.826] (II) Using input driver 'libinput' for 'Sleep Button'
[ 3.826] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 40 paused 0
[ 3.826] (**) Sleep Button: always reports core events
[ 3.826] (**) Option "Device" "/dev/input/event1"
[ 3.826] (**) Option "_source" "server/udev"
[ 3.826] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 3.826] (II) event1 - Sleep Button: device is a keyboard
[ 3.826] (II) event1 - Sleep Button: device removed
[ 3.826] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 3.826] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 3.826] (**) Option "xkb_model" "pc105"
[ 3.826] (**) Option "xkb_layout" "us,ru"
[ 3.826] (**) Option "xkb_variant" ",winkeys"
[ 3.826] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3.827] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 3.827] (II) event1 - Sleep Button: device is a keyboard
[ 3.828] (II) config/udev: Adding input device HD WebCam: HD WebCam (/dev/input/event20)
[ 3.828] (**) HD WebCam: HD WebCam: Applying InputClass "libinput keyboard catchall"
[ 3.828] (**) HD WebCam: HD WebCam: Applying InputClass "system-keyboard"
[ 3.828] (II) Using input driver 'libinput' for 'HD WebCam: HD WebCam'
[ 3.828] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 41 paused 0
[ 3.828] (**) HD WebCam: HD WebCam: always reports core events
[ 3.828] (**) Option "Device" "/dev/input/event20"
[ 3.828] (**) Option "_source" "server/udev"
[ 3.829] (II) event20 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[ 3.829] (II) event20 - HD WebCam: HD WebCam: device is a keyboard
[ 3.829] (II) event20 - HD WebCam: HD WebCam: device removed
[ 3.829] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input26/event20"
[ 3.829] (II) XINPUT: Adding extended input device "HD WebCam: HD WebCam" (type: KEYBOARD, id 9)
[ 3.829] (**) Option "xkb_model" "pc105"
[ 3.829] (**) Option "xkb_layout" "us,ru"
[ 3.829] (**) Option "xkb_variant" ",winkeys"
[ 3.829] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3.829] (II) event20 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[ 3.829] (II) event20 - HD WebCam: HD WebCam: device is a keyboard
[ 3.830] (II) config/udev: Adding input device ELAN0504:00 04F3:3091 Mouse (/dev/input/event15)
[ 3.830] (**) ELAN0504:00 04F3:3091 Mouse: Applying InputClass "libinput pointer catchall"
[ 3.830] (II) Using input driver 'libinput' for 'ELAN0504:00 04F3:3091 Mouse'
[ 3.830] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 42 paused 0
[ 3.830] (**) ELAN0504:00 04F3:3091 Mouse: always reports core events
[ 3.830] (**) Option "Device" "/dev/input/event15"
[ 3.830] (**) Option "_source" "server/udev"
[ 3.831] (II) event15 - ELAN0504:00 04F3:3091 Mouse: is tagged by udev as: Mouse Pointingstick
[ 3.832] (II) event15 - ELAN0504:00 04F3:3091 Mouse: device is a pointer
[ 3.832] (II) event15 - ELAN0504:00 04F3:3091 Mouse: device removed
[ 3.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input18/event15"
[ 3.832] (II) XINPUT: Adding extended input device "ELAN0504:00 04F3:3091 Mouse" (type: MOUSE, id 10)
[ 3.833] (**) Option "AccelerationScheme" "none"
[ 3.833] (**) ELAN0504:00 04F3:3091 Mouse: (accel) selected scheme none/0
[ 3.833] (**) ELAN0504:00 04F3:3091 Mouse: (accel) acceleration factor: 2.000
[ 3.833] (**) ELAN0504:00 04F3:3091 Mouse: (accel) acceleration threshold: 4
[ 3.834] (II) event15 - ELAN0504:00 04F3:3091 Mouse: is tagged by udev as: Mouse Pointingstick
[ 3.834] (II) event15 - ELAN0504:00 04F3:3091 Mouse: device is a pointer
[ 3.836] (II) config/udev: Adding input device ELAN0504:00 04F3:3091 Mouse (/dev/input/mouse0)
[ 3.836] (II) No input driver specified, ignoring this device.
[ 3.836] (II) This device may have been added with another device file.
[ 3.836] (II) config/udev: Adding input device ELAN0504:00 04F3:3091 Touchpad (/dev/input/event16)
[ 3.836] (**) ELAN0504:00 04F3:3091 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 3.836] (II) Using input driver 'libinput' for 'ELAN0504:00 04F3:3091 Touchpad'
[ 3.837] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 43 paused 0
[ 3.837] (**) ELAN0504:00 04F3:3091 Touchpad: always reports core events
[ 3.837] (**) Option "Device" "/dev/input/event16"
[ 3.837] (**) Option "_source" "server/udev"
[ 3.841] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: is tagged by udev as: Touchpad
[ 3.842] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: device is a touchpad
[ 3.842] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: device removed
[ 3.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input20/event16"
[ 3.842] (II) XINPUT: Adding extended input device "ELAN0504:00 04F3:3091 Touchpad" (type: TOUCHPAD, id 11)
[ 3.843] (**) Option "AccelerationScheme" "none"
[ 3.843] (**) ELAN0504:00 04F3:3091 Touchpad: (accel) selected scheme none/0
[ 3.843] (**) ELAN0504:00 04F3:3091 Touchpad: (accel) acceleration factor: 2.000
[ 3.843] (**) ELAN0504:00 04F3:3091 Touchpad: (accel) acceleration threshold: 4
[ 3.844] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: is tagged by udev as: Touchpad
[ 3.845] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: device is a touchpad
[ 3.845] (II) config/udev: Adding input device ELAN0504:00 04F3:3091 Touchpad (/dev/input/mouse1)
[ 3.845] (II) No input driver specified, ignoring this device.
[ 3.845] (II) This device may have been added with another device file.
[ 3.845] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[ 3.845] (II) No input driver specified, ignoring this device.
[ 3.845] (II) This device may have been added with another device file.
[ 3.846] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 3.846] (II) No input driver specified, ignoring this device.
[ 3.846] (II) This device may have been added with another device file.
[ 3.846] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event8)
[ 3.846] (II) No input driver specified, ignoring this device.
[ 3.846] (II) This device may have been added with another device file.
[ 3.846] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[ 3.846] (II) No input driver specified, ignoring this device.
[ 3.846] (II) This device may have been added with another device file.
[ 3.846] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event14)
[ 3.846] (II) No input driver specified, ignoring this device.
[ 3.846] (II) This device may have been added with another device file.
[ 3.846] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event9)
[ 3.846] (II) No input driver specified, ignoring this device.
[ 3.846] (II) This device may have been added with another device file.
[ 3.846] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[ 3.847] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 3.847] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 3.847] (II) Using input driver 'libinput' for 'Intel HID events'
[ 3.847] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 44 paused 0
[ 3.847] (**) Intel HID events: always reports core events
[ 3.847] (**) Option "Device" "/dev/input/event5"
[ 3.847] (**) Option "_source" "server/udev"
[ 3.847] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 3.847] (II) event5 - Intel HID events: device is a keyboard
[ 3.847] (II) event5 - Intel HID events: device removed
[ 3.847] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input5/event5"
[ 3.847] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 12)
[ 3.847] (**) Option "xkb_model" "pc105"
[ 3.847] (**) Option "xkb_layout" "us,ru"
[ 3.847] (**) Option "xkb_variant" ",winkeys"
[ 3.847] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3.848] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 3.848] (II) event5 - Intel HID events: device is a keyboard
[ 3.848] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event6)
[ 3.848] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[ 3.848] (**) Intel HID 5 button array: Applying InputClass "system-keyboard"
[ 3.848] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[ 3.848] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 45 paused 0
[ 3.848] (**) Intel HID 5 button array: always reports core events
[ 3.848] (**) Option "Device" "/dev/input/event6"
[ 3.848] (**) Option "_source" "server/udev"
[ 3.849] (II) event6 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 3.849] (II) event6 - Intel HID 5 button array: device is a keyboard
[ 3.849] (II) event6 - Intel HID 5 button array: device removed
[ 3.849] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input6/event6"
[ 3.849] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 13)
[ 3.849] (**) Option "xkb_model" "pc105"
[ 3.849] (**) Option "xkb_layout" "us,ru"
[ 3.849] (**) Option "xkb_variant" ",winkeys"
[ 3.849] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3.849] (II) event6 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 3.849] (II) event6 - Intel HID 5 button array: device is a keyboard
[ 3.850] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 3.850] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 3.850] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 3.850] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 3.850] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 46 paused 0
[ 3.850] (**) AT Translated Set 2 keyboard: always reports core events
[ 3.850] (**) Option "Device" "/dev/input/event4"
[ 3.850] (**) Option "_source" "server/udev"
[ 3.851] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 3.851] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 3.851] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 3.851] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 3.851] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 3.851] (**) Option "xkb_model" "pc105"
[ 3.851] (**) Option "xkb_layout" "us,ru"
[ 3.851] (**) Option "xkb_variant" ",winkeys"
[ 3.851] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3.852] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 3.852] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 3.852] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 3.852] (II) No input driver specified, ignoring this device.
[ 3.852] (II) This device may have been added with another device file.
[ 3.853] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event10)
[ 3.853] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 3.853] (**) Acer WMI hotkeys: Applying InputClass "system-keyboard"
[ 3.853] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[ 3.853] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 47 paused 0
[ 3.853] (**) Acer WMI hotkeys: always reports core events
[ 3.853] (**) Option "Device" "/dev/input/event10"
[ 3.853] (**) Option "_source" "server/udev"
[ 3.854] (II) event10 - Acer WMI hotkeys: is tagged by udev as: Keyboard
[ 3.854] (II) event10 - Acer WMI hotkeys: device is a keyboard
[ 3.854] (II) event10 - Acer WMI hotkeys: device removed
[ 3.854] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event10"
[ 3.854] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 15)
[ 3.854] (**) Option "xkb_model" "pc105"
[ 3.854] (**) Option "xkb_layout" "us,ru"
[ 3.854] (**) Option "xkb_variant" ",winkeys"
[ 3.854] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3.854] (II) event10 - Acer WMI hotkeys: is tagged by udev as: Keyboard
[ 3.854] (II) event10 - Acer WMI hotkeys: device is a keyboard
[ 3.916] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event14)
[ 3.916] (II) No input driver specified, ignoring this device.
[ 3.916] (II) This device may have been added with another device file.
[ 3.916] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 3.916] (II) No input driver specified, ignoring this device.
[ 3.916] (II) This device may have been added with another device file.
[ 3.916] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event8)
[ 3.916] (II) No input driver specified, ignoring this device.
[ 3.916] (II) This device may have been added with another device file.
[ 3.916] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[ 3.916] (II) No input driver specified, ignoring this device.
[ 3.916] (II) This device may have been added with another device file.
[ 3.917] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event9)
[ 3.917] (II) No input driver specified, ignoring this device.
[ 3.917] (II) This device may have been added with another device file.
[ 3.917] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[ 3.917] (II) No input driver specified, ignoring this device.
[ 3.917] (II) This device may have been added with another device file.
[ 3.917] (II) config/udev: removing device ELAN0504:00 04F3:3091 Touchpad
[ 3.917] (**) Option "fd" "43"
[ 3.917] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: device removed
[ 3.917] (II) UnloadModule: "libinput"
[ 3.917] (II) systemd-logind: releasing fd for 13:80
[ 3.977] (II) config/udev: Adding input device ELAN0504:00 04F3:3091 Touchpad (/dev/input/event16)
[ 3.977] (**) ELAN0504:00 04F3:3091 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 3.977] (II) Using input driver 'libinput' for 'ELAN0504:00 04F3:3091 Touchpad'
[ 3.978] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 50 paused 0
[ 3.978] (**) ELAN0504:00 04F3:3091 Touchpad: always reports core events
[ 3.978] (**) Option "Device" "/dev/input/event16"
[ 3.978] (**) Option "_source" "server/udev"
[ 3.978] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: is tagged by udev as: Touchpad
[ 3.979] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: device is a touchpad
[ 3.979] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: device removed
[ 3.979] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input20/event16"
[ 3.979] (II) XINPUT: Adding extended input device "ELAN0504:00 04F3:3091 Touchpad" (type: TOUCHPAD, id 11)
[ 3.980] (**) Option "AccelerationScheme" "none"
[ 3.980] (**) ELAN0504:00 04F3:3091 Touchpad: (accel) selected scheme none/0
[ 3.980] (**) ELAN0504:00 04F3:3091 Touchpad: (accel) acceleration factor: 2.000
[ 3.980] (**) ELAN0504:00 04F3:3091 Touchpad: (accel) acceleration threshold: 4
[ 3.980] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: is tagged by udev as: Touchpad
[ 3.981] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: device is a touchpad
[ 3.981] (II) config/udev: Adding input device ELAN0504:00 04F3:3091 Mouse (/dev/input/mouse0)
[ 3.981] (II) No input driver specified, ignoring this device.
[ 3.981] (II) This device may have been added with another device file.
[ 3.982] (II) config/udev: Adding input device ELAN0504:00 04F3:3091 Touchpad (/dev/input/mouse1)
[ 3.982] (II) No input driver specified, ignoring this device.
[ 3.982] (II) This device may have been added with another device file.
[ 3.982] (II) config/udev: removing device HD WebCam: HD WebCam
[ 3.982] (**) Option "fd" "41"
[ 3.982] (II) event20 - HD WebCam: HD WebCam: device removed
[ 3.982] (II) UnloadModule: "libinput"
[ 3.982] (II) systemd-logind: releasing fd for 13:84
[ 4.027] (II) config/udev: Adding input device HD WebCam: HD WebCam (/dev/input/event20)
[ 4.027] (**) HD WebCam: HD WebCam: Applying InputClass "libinput keyboard catchall"
[ 4.027] (**) HD WebCam: HD WebCam: Applying InputClass "system-keyboard"
[ 4.027] (II) Using input driver 'libinput' for 'HD WebCam: HD WebCam'
[ 4.028] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 52 paused 0
[ 4.028] (**) HD WebCam: HD WebCam: always reports core events
[ 4.028] (**) Option "Device" "/dev/input/event20"
[ 4.028] (**) Option "_source" "server/udev"
[ 4.028] (II) event20 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[ 4.028] (II) event20 - HD WebCam: HD WebCam: device is a keyboard
[ 4.028] (II) event20 - HD WebCam: HD WebCam: device removed
[ 4.028] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input26/event20"
[ 4.028] (II) XINPUT: Adding extended input device "HD WebCam: HD WebCam" (type: KEYBOARD, id 9)
[ 4.028] (**) Option "xkb_model" "pc105"
[ 4.028] (**) Option "xkb_layout" "us,ru"
[ 4.028] (**) Option "xkb_variant" ",winkeys"
[ 4.028] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 4.029] (II) event20 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[ 4.029] (II) event20 - HD WebCam: HD WebCam: device is a keyboard
[ 4.030] (II) config/udev: Adding input device Logitech M350 (/dev/input/mouse4)
[ 4.030] (II) No input driver specified, ignoring this device.
[ 4.030] (II) This device may have been added with another device file.
[ 4.031] (II) config/udev: Adding input device Logitech Wireless Device PID:4055 (/dev/input/mouse3)
[ 4.031] (II) No input driver specified, ignoring this device.
[ 4.031] (II) This device may have been added with another device file.
[ 4.032] (II) config/udev: Adding input device Logitech Anywhere MX (/dev/input/mouse2)
[ 4.032] (II) No input driver specified, ignoring this device.
[ 4.032] (II) This device may have been added with another device file.
[ 4.032] (II) config/udev: Adding input device Logitech M350 (/dev/input/event22)
[ 4.032] (**) Logitech M350: Applying InputClass "libinput pointer catchall"
[ 4.032] (II) Using input driver 'libinput' for 'Logitech M350'
[ 4.032] (II) systemd-logind: got fd for /dev/input/event22 13:86 fd 53 paused 0
[ 4.032] (**) Logitech M350: always reports core events
[ 4.032] (**) Option "Device" "/dev/input/event22"
[ 4.032] (**) Option "_source" "server/udev"
[ 4.033] (II) event22 - Logitech M350: is tagged by udev as: Mouse
[ 4.033] (II) event22 - Logitech M350: device is a pointer
[ 4.033] (II) event22 - Logitech M350: device removed
[ 4.033] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4080.0009/input/input51/event22"
[ 4.033] (II) XINPUT: Adding extended input device "Logitech M350" (type: MOUSE, id 16)
[ 4.033] (**) Option "AccelerationScheme" "none"
[ 4.033] (**) Logitech M350: (accel) selected scheme none/0
[ 4.033] (**) Logitech M350: (accel) acceleration factor: 2.000
[ 4.033] (**) Logitech M350: (accel) acceleration threshold: 4
[ 4.034] (II) event22 - Logitech M350: is tagged by udev as: Mouse
[ 4.034] (II) event22 - Logitech M350: device is a pointer
[ 4.034] (II) config/udev: Adding input device Logitech K270 (/dev/input/event19)
[ 4.035] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[ 4.035] (**) Logitech K270: Applying InputClass "system-keyboard"
[ 4.035] (II) Using input driver 'libinput' for 'Logitech K270'
[ 4.035] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 54 paused 0
[ 4.035] (**) Logitech K270: always reports core events
[ 4.035] (**) Option "Device" "/dev/input/event19"
[ 4.035] (**) Option "_source" "server/udev"
[ 4.035] (II) event19 - Logitech K270: is tagged by udev as: Keyboard
[ 4.035] (II) event19 - Logitech K270: device is a keyboard
[ 4.036] (II) event19 - Logitech K270: device removed
[ 4.036] (II) libinput: Logitech K270: needs a virtual subdevice
[ 4.036] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4003.0007/input/input49/event19"
[ 4.036] (II) XINPUT: Adding extended input device "Logitech K270" (type: MOUSE, id 17)
[ 4.036] (**) Option "AccelerationScheme" "none"
[ 4.036] (**) Logitech K270: (accel) selected scheme none/0
[ 4.036] (**) Logitech K270: (accel) acceleration factor: 2.000
[ 4.036] (**) Logitech K270: (accel) acceleration threshold: 4
[ 4.036] (II) event19 - Logitech K270: is tagged by udev as: Keyboard
[ 4.036] (II) event19 - Logitech K270: device is a keyboard
[ 4.037] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[ 4.037] (**) Logitech K270: Applying InputClass "system-keyboard"
[ 4.037] (II) Using input driver 'libinput' for 'Logitech K270'
[ 4.037] (II) systemd-logind: returning pre-existing fd for /dev/input/event19 13:83
[ 4.037] (**) Logitech K270: always reports core events
[ 4.037] (**) Option "Device" "/dev/input/event19"
[ 4.037] (**) Option "_source" "_driver/libinput"
[ 4.037] (II) libinput: Logitech K270: is a virtual subdevice
[ 4.037] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4003.0007/input/input49/event19"
[ 4.037] (II) XINPUT: Adding extended input device "Logitech K270" (type: KEYBOARD, id 18)
[ 4.037] (**) Option "xkb_model" "pc105"
[ 4.037] (**) Option "xkb_layout" "us,ru"
[ 4.037] (**) Option "xkb_variant" ",winkeys"
[ 4.037] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 4.037] (II) config/udev: Adding input device Logitech Anywhere MX (/dev/input/event17)
[ 4.037] (**) Logitech Anywhere MX: Applying InputClass "libinput pointer catchall"
[ 4.037] (II) Using input driver 'libinput' for 'Logitech Anywhere MX'
[ 4.037] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 55 paused 0
[ 4.037] (**) Logitech Anywhere MX: always reports core events
[ 4.037] (**) Option "Device" "/dev/input/event17"
[ 4.037] (**) Option "_source" "server/udev"
[ 4.038] (II) event17 - Logitech Anywhere MX: is tagged by udev as: Mouse
[ 4.038] (II) event17 - Logitech Anywhere MX: device is a pointer
[ 4.038] (II) event17 - Logitech Anywhere MX: device removed
[ 4.038] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:1017.0005/input/input47/event17"
[ 4.038] (II) XINPUT: Adding extended input device "Logitech Anywhere MX" (type: MOUSE, id 19)
[ 4.038] (**) Option "AccelerationScheme" "none"
[ 4.038] (**) Logitech Anywhere MX: (accel) selected scheme none/0
[ 4.038] (**) Logitech Anywhere MX: (accel) acceleration factor: 2.000
[ 4.038] (**) Logitech Anywhere MX: (accel) acceleration threshold: 4
[ 4.039] (II) event17 - Logitech Anywhere MX: is tagged by udev as: Mouse
[ 4.039] (II) event17 - Logitech Anywhere MX: device is a pointer
[ 4.040] (II) config/udev: Adding input device Logitech Wireless Device PID:4055 (/dev/input/event18)
[ 4.040] (**) Logitech Wireless Device PID:4055: Applying InputClass "libinput pointer catchall"
[ 4.040] (II) Using input driver 'libinput' for 'Logitech Wireless Device PID:4055'
[ 4.040] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 56 paused 0
[ 4.040] (**) Logitech Wireless Device PID:4055: always reports core events
[ 4.040] (**) Option "Device" "/dev/input/event18"
[ 4.040] (**) Option "_source" "server/udev"
[ 4.041] (II) event18 - Logitech Wireless Device PID:4055: is tagged by udev as: Mouse
[ 4.041] (II) event18 - Logitech Wireless Device PID:4055: device is a pointer
[ 4.041] (II) event18 - Logitech Wireless Device PID:4055: device removed
[ 4.041] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4055.0006/input/input48/event18"
[ 4.041] (II) XINPUT: Adding extended input device "Logitech Wireless Device PID:4055" (type: MOUSE, id 20)
[ 4.041] (**) Option "AccelerationScheme" "none"
[ 4.041] (**) Logitech Wireless Device PID:4055: (accel) selected scheme none/0
[ 4.041] (**) Logitech Wireless Device PID:4055: (accel) acceleration factor: 2.000
[ 4.041] (**) Logitech Wireless Device PID:4055: (accel) acceleration threshold: 4
[ 4.041] (II) event18 - Logitech Wireless Device PID:4055: is tagged by udev as: Mouse
[ 4.042] (II) event18 - Logitech Wireless Device PID:4055: device is a pointer
[ 4.042] (II) config/udev: Adding input device Logitech K370s/K375s (/dev/input/event21)
[ 4.042] (**) Logitech K370s/K375s: Applying InputClass "libinput keyboard catchall"
[ 4.042] (**) Logitech K370s/K375s: Applying InputClass "system-keyboard"
[ 4.042] (II) Using input driver 'libinput' for 'Logitech K370s/K375s'
[ 4.042] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 57 paused 0
[ 4.042] (**) Logitech K370s/K375s: always reports core events
[ 4.042] (**) Option "Device" "/dev/input/event21"
[ 4.042] (**) Option "_source" "server/udev"
[ 4.043] (II) event21 - Logitech K370s/K375s: is tagged by udev as: Keyboard
[ 4.043] (II) event21 - Logitech K370s/K375s: device is a keyboard
[ 4.043] (II) event21 - Logitech K370s/K375s: device removed
[ 4.043] (II) libinput: Logitech K370s/K375s: needs a virtual subdevice
[ 4.043] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4061.0008/input/input50/event21"
[ 4.043] (II) XINPUT: Adding extended input device "Logitech K370s/K375s" (type: MOUSE, id 21)
[ 4.043] (**) Option "AccelerationScheme" "none"
[ 4.043] (**) Logitech K370s/K375s: (accel) selected scheme none/0
[ 4.043] (**) Logitech K370s/K375s: (accel) acceleration factor: 2.000
[ 4.043] (**) Logitech K370s/K375s: (accel) acceleration threshold: 4
[ 4.044] (II) event21 - Logitech K370s/K375s: is tagged by udev as: Keyboard
[ 4.044] (II) event21 - Logitech K370s/K375s: device is a keyboard
[ 4.044] (**) Logitech K370s/K375s: Applying InputClass "libinput keyboard catchall"
[ 4.044] (**) Logitech K370s/K375s: Applying InputClass "system-keyboard"
[ 4.044] (II) Using input driver 'libinput' for 'Logitech K370s/K375s'
[ 4.044] (II) systemd-logind: returning pre-existing fd for /dev/input/event21 13:85
[ 4.044] (**) Logitech K370s/K375s: always reports core events
[ 4.044] (**) Option "Device" "/dev/input/event21"
[ 4.044] (**) Option "_source" "_driver/libinput"
[ 4.044] (II) libinput: Logitech K370s/K375s: is a virtual subdevice
[ 4.044] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4061.0008/input/input50/event21"
[ 4.044] (II) XINPUT: Adding extended input device "Logitech K370s/K375s" (type: KEYBOARD, id 22)
[ 4.044] (**) Option "xkb_model" "pc105"
[ 4.044] (**) Option "xkb_layout" "us,ru"
[ 4.044] (**) Option "xkb_variant" ",winkeys"
[ 4.044] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 4.273] (II) modeset(0): EDID vendor "CMN", prod id 5332
[ 4.273] (II) modeset(0): Printing DDC gathered Modelines:
[ 4.273] (II) modeset(0): Modeline "1920x1080"x0.0 152.84 1920 2000 2060 2250 1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[ 78.891] (**) Option "fd" "36"
[ 78.891] (II) event2 - Video Bus: device removed
[ 78.892] (**) Option "fd" "39"
[ 78.892] (II) event3 - Video Bus: device removed
[ 78.892] (**) Option "fd" "40"
[ 78.892] (II) event1 - Sleep Button: device removed
[ 78.893] (**) Option "fd" "42"
[ 78.893] (II) event15 - ELAN0504:00 04F3:3091 Mouse: device removed
[ 78.893] (**) Option "fd" "44"
[ 78.893] (II) event5 - Intel HID events: device removed
[ 78.893] (**) Option "fd" "45"
[ 78.893] (II) event6 - Intel HID 5 button array: device removed
[ 78.894] (**) Option "fd" "46"
[ 78.894] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 78.894] (**) Option "fd" "47"
[ 78.894] (II) event10 - Acer WMI hotkeys: device removed
[ 78.894] (**) Option "fd" "50"
[ 78.894] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: device removed
[ 78.895] (**) Option "fd" "52"
[ 78.895] (II) event20 - HD WebCam: HD WebCam: device removed
[ 78.895] (**) Option "fd" "53"
[ 78.895] (II) event22 - Logitech M350: device removed
[ 78.895] (**) Option "fd" "54"
[ 78.896] (**) Option "fd" "54"
[ 78.896] (II) event19 - Logitech K270: device removed
[ 78.896] (**) Option "fd" "55"
[ 78.896] (II) event17 - Logitech Anywhere MX: device removed
[ 78.896] (**) Option "fd" "56"
[ 78.896] (II) event18 - Logitech Wireless Device PID:4055: device removed
[ 78.897] (**) Option "fd" "57"
[ 78.897] (**) Option "fd" "57"
[ 78.897] (II) event21 - Logitech K370s/K375s: device removed
[ 78.897] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 78.907] (EE) modeset(0): failed to set mode: Permission denied
[ 78.908] (II) systemd-logind: got pause for 13:83
[ 78.908] (II) systemd-logind: got pause for 13:74
[ 78.909] (II) systemd-logind: got pause for 13:70
[ 78.909] (II) systemd-logind: got pause for 13:67
[ 78.909] (II) systemd-logind: got pause for 13:81
[ 78.909] (II) systemd-logind: got pause for 13:84
[ 78.909] (II) systemd-logind: got pause for 13:65
[ 78.909] (II) systemd-logind: got pause for 13:69
[ 78.909] (II) systemd-logind: got pause for 226:1
[ 78.909] (II) systemd-logind: got pause for 13:80
[ 78.909] (II) systemd-logind: got pause for 13:82
[ 78.909] (II) systemd-logind: got pause for 13:86
[ 78.909] (II) systemd-logind: got pause for 13:66
[ 78.909] (II) systemd-logind: got pause for 13:85
[ 78.909] (II) systemd-logind: got pause for 13:68
[ 78.909] (II) systemd-logind: got pause for 13:79
[ 90.007] (II) UnloadModule: "libinput"
[ 90.007] (II) systemd-logind: not releasing fd for 13:85, still in use
[ 90.007] (II) UnloadModule: "libinput"
[ 90.007] (II) systemd-logind: releasing fd for 13:85
[ 90.045] (II) UnloadModule: "libinput"
[ 90.045] (II) systemd-logind: releasing fd for 13:82
[ 90.072] (II) UnloadModule: "libinput"
[ 90.072] (II) systemd-logind: releasing fd for 13:81
[ 90.098] (II) UnloadModule: "libinput"
[ 90.098] (II) systemd-logind: not releasing fd for 13:83, still in use
[ 90.099] (II) UnloadModule: "libinput"
[ 90.099] (II) systemd-logind: releasing fd for 13:83
[ 90.117] (II) UnloadModule: "libinput"
[ 90.117] (II) systemd-logind: releasing fd for 13:86
[ 90.165] (II) UnloadModule: "libinput"
[ 90.165] (II) systemd-logind: releasing fd for 13:84
[ 90.181] (II) UnloadModule: "libinput"
[ 90.181] (II) systemd-logind: releasing fd for 13:80
[ 90.218] (II) UnloadModule: "libinput"
[ 90.218] (II) systemd-logind: releasing fd for 13:74
[ 90.245] (II) UnloadModule: "libinput"
[ 90.245] (II) systemd-logind: releasing fd for 13:68
[ 90.269] (II) UnloadModule: "libinput"
[ 90.269] (II) systemd-logind: releasing fd for 13:70
[ 90.312] (II) UnloadModule: "libinput"
[ 90.312] (II) systemd-logind: releasing fd for 13:69
[ 90.338] (II) UnloadModule: "libinput"
[ 90.338] (II) systemd-logind: releasing fd for 13:79
[ 90.365] (II) UnloadModule: "libinput"
[ 90.365] (II) systemd-logind: releasing fd for 13:65
[ 90.392] (II) UnloadModule: "libinput"
[ 90.392] (II) systemd-logind: releasing fd for 13:67
[ 90.433] (II) UnloadModule: "libinput"
[ 90.433] (II) systemd-logind: releasing fd for 13:66
[ 90.498] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 90.502] (II) Server terminated successfully (0). Closing log file.2) /var/log/Xorg.1.log
[ 78.943] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[ 78.943] _XSERVTransMakeAllCOTSServerListeners: server already running
[ 78.943] (--) Log file renamed from "/var/log/Xorg.pid-952.log" to "/var/log/Xorg.1.log"
[ 78.943] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 78.943]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[ 78.943] Build Operating System: Linux Archlinux
[ 78.943] Current Operating System: Linux solid 5.14.2-arch1-2 #1 SMP PREEMPT Thu, 09 Sep 2021 09:42:35 +0000 x86_64
[ 78.943] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3afe0d83-05c4-4142-a08c-7c18b193c6fc rw loglevel=3 snd_hda_intel.dmic_detect=0
[ 78.943] Build Date: 04 August 2021 08:13:54AM
[ 78.943]
[ 78.943] Current version of pixman: 0.40.0
[ 78.943] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 78.943] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 78.943] (==) Log file: "/var/log/Xorg.1.log", Time: Fri Sep 10 15:24:04 2021
[ 78.944] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 78.944] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 78.944] (==) No Layout section. Using the first Screen section.
[ 78.944] (==) No screen section available. Using defaults.
[ 78.944] (**) |-->Screen "Default Screen Section" (0)
[ 78.944] (**) | |-->Monitor "<default monitor>"
[ 78.944] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 78.944] (==) Automatically adding devices
[ 78.944] (==) Automatically enabling devices
[ 78.944] (==) Automatically adding GPU devices
[ 78.944] (==) Automatically binding GPU devices
[ 78.944] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 78.944] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 78.944] Entry deleted from font path.
[ 78.944] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 78.944] Entry deleted from font path.
[ 78.944] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 78.944] Entry deleted from font path.
[ 78.944] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 78.944] Entry deleted from font path.
[ 78.944] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 78.944] Entry deleted from font path.
[ 78.944] (==) FontPath set to:
/usr/share/fonts/TTF
[ 78.944] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 78.944] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 78.944] (II) Module ABI versions:
[ 78.944] X.Org ANSI C Emulation: 0.4
[ 78.944] X.Org Video Driver: 24.1
[ 78.944] X.Org XInput driver : 24.1
[ 78.944] X.Org Server Extension : 10.0
[ 78.945] (++) using VT number 2
[ 78.947] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[ 78.948] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 78.948] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 12 paused 0
[ 78.949] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 78.949] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[ 78.951] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 78.952] (--) PCI:*(0@0:2:0) 8086:9b41:1025:1410 rev 2, Mem @ 0xb5000000/16777216, 0xc0000000/268435456, I/O @ 0x00007000/64, BIOS @ 0x????????/131072
[ 78.952] (--) PCI: (6@0:0:0) 10de:1d13:1025:1410 rev 161, Mem @ 0xb9000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 78.952] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 78.952] (II) LoadModule: "glx"
[ 78.953] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 78.954] (II) Module glx: vendor="X.Org Foundation"
[ 78.954] compiled for 1.20.13, module version = 1.0.0
[ 78.954] ABI class: X.Org Server Extension, version 10.0
[ 78.954] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 78.954] loading driver: nvidia
[ 78.955] (==) Matched intel as autoconfigured driver 0
[ 78.955] (==) Matched nvidia as autoconfigured driver 1
[ 78.955] (==) Matched nouveau as autoconfigured driver 2
[ 78.955] (==) Matched nv as autoconfigured driver 3
[ 78.955] (==) Matched modesetting as autoconfigured driver 4
[ 78.955] (==) Matched fbdev as autoconfigured driver 5
[ 78.955] (==) Matched vesa as autoconfigured driver 6
[ 78.955] (==) Assigned the driver to the xf86ConfigLayout
[ 78.955] (II) LoadModule: "intel"
[ 78.955] (WW) Warning, couldn't open module intel
[ 78.955] (EE) Failed to load module "intel" (module does not exist, 0)
[ 78.955] (II) LoadModule: "nvidia"
[ 78.955] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 78.955] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 78.955] compiled for 1.6.99.901, module version = 1.0.0
[ 78.955] Module class: X.Org Video Driver
[ 78.955] (II) LoadModule: "nouveau"
[ 78.956] (WW) Warning, couldn't open module nouveau
[ 78.956] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 78.956] (II) LoadModule: "nv"
[ 78.956] (WW) Warning, couldn't open module nv
[ 78.956] (EE) Failed to load module "nv" (module does not exist, 0)
[ 78.956] (II) LoadModule: "modesetting"
[ 78.956] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 78.957] (II) Module modesetting: vendor="X.Org Foundation"
[ 78.957] compiled for 1.20.13, module version = 1.20.13
[ 78.957] Module class: X.Org Video Driver
[ 78.957] ABI class: X.Org Video Driver, version 24.1
[ 78.957] (II) LoadModule: "fbdev"
[ 78.957] (WW) Warning, couldn't open module fbdev
[ 78.957] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 78.957] (II) LoadModule: "vesa"
[ 78.957] (WW) Warning, couldn't open module vesa
[ 78.957] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 78.957] (II) NVIDIA dlloader X Driver 470.63.01 Tue Aug 3 20:37:27 UTC 2021
[ 78.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 78.957] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 78.957] (II) modeset(0): using drv /dev/dri/card1
[ 78.957] (II) systemd-logind: releasing fd for 226:0
[ 78.958] (II) Loading sub module "fb"
[ 78.958] (II) LoadModule: "fb"
[ 78.958] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 78.958] (II) Module fb: vendor="X.Org Foundation"
[ 78.958] compiled for 1.20.13, module version = 1.0.0
[ 78.959] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.959] (II) Loading sub module "wfb"
[ 78.959] (II) LoadModule: "wfb"
[ 78.959] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 78.959] (II) Module wfb: vendor="X.Org Foundation"
[ 78.959] compiled for 1.20.13, module version = 1.0.0
[ 78.959] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.959] (II) Loading sub module "ramdac"
[ 78.959] (II) LoadModule: "ramdac"
[ 78.959] (II) Module "ramdac" already built-in
[ 78.960] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 78.960] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 78.960] (==) modeset(0): RGB weight 888
[ 78.960] (==) modeset(0): Default visual is TrueColor
[ 78.960] (II) Loading sub module "glamoregl"
[ 78.960] (II) LoadModule: "glamoregl"
[ 78.960] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 78.965] (II) Module glamoregl: vendor="X.Org Foundation"
[ 78.965] compiled for 1.20.13, module version = 1.0.1
[ 78.965] ABI class: X.Org ANSI C Emulation, version 0.4
[ 79.000] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics (CML GT2)
[ 79.000] (II) modeset(0): glamor initialized
[ 79.001] (II) modeset(0): Output eDP-1 has no monitor section
[ 79.010] (II) modeset(0): Output HDMI-1 has no monitor section
[ 79.011] (II) modeset(0): EDID for output eDP-1
[ 79.011] (II) modeset(0): Manufacturer: CMN Model: 14d4 Serial#: 0
[ 79.011] (II) modeset(0): Year: 2016 Week: 36
[ 79.011] (II) modeset(0): EDID Version: 1.4
[ 79.011] (II) modeset(0): Digital Display Input
[ 79.011] (II) modeset(0): 8 bits per channel
[ 79.011] (II) modeset(0): Digital interface is DisplayPort
[ 79.011] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 79.011] (II) modeset(0): Gamma: 2.20
[ 79.011] (II) modeset(0): No DPMS capabilities specified
[ 79.011] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 79.011] (II) modeset(0): First detailed timing is preferred mode
[ 79.011] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 79.011] (II) modeset(0): redX: 0.590 redY: 0.350 greenX: 0.330 greenY: 0.555
[ 79.011] (II) modeset(0): blueX: 0.153 blueY: 0.119 whiteX: 0.313 whiteY: 0.329
[ 79.011] (II) modeset(0): Manufacturer's mask: 0
[ 79.011] (II) modeset(0): Supported detailed timing:
[ 79.011] (II) modeset(0): clock: 152.8 MHz Image Size: 309 x 173 mm
[ 79.011] (II) modeset(0): h_active: 1920 h_sync: 2000 h_sync_end 2060 h_blank_end 2250 h_border: 0
[ 79.011] (II) modeset(0): v_active: 1080 v_sync: 1086 v_sync_end 1094 v_blanking: 1132 v_border: 0
[ 79.011] (II) modeset(0): N140HCA-EAC
[ 79.011] (II) modeset(0): CMN
[ 79.011] (II) modeset(0): N140HCA-EAC
[ 79.011] (II) modeset(0): EDID (in hex):
[ 79.011] (II) modeset(0): 00ffffffffffff000daed41400000000
[ 79.011] (II) modeset(0): 241a0104a51f11780228659759548e27
[ 79.011] (II) modeset(0): 1e505400000001010101010101010101
[ 79.011] (II) modeset(0): 010101010101b43b804a71383440503c
[ 79.011] (II) modeset(0): 680035ad10000018000000fe004e3134
[ 79.011] (II) modeset(0): 304843412d4541430a20000000fe0043
[ 79.011] (II) modeset(0): 4d4e0a202020202020202020000000fe
[ 79.011] (II) modeset(0): 004e3134304843412d4541430a200005
[ 79.011] (II) modeset(0): Printing probed modes for output eDP-1
[ 79.011] (II) modeset(0): Modeline "1920x1080"x60.0 152.84 1920 2000 2060 2250 1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[ 79.011] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 79.011] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 79.011] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 79.011] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 79.011] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 79.011] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 79.011] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 79.011] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 79.011] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 79.011] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 79.011] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 79.011] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 79.011] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 79.011] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 79.011] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 79.011] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 79.011] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 79.011] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 79.011] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 79.011] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 79.011] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 79.011] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 79.011] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 79.011] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 79.011] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 79.011] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 79.011] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 79.011] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 79.011] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 79.011] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 79.011] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 79.011] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 79.011] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 79.011] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 79.011] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 79.011] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 79.011] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 79.011] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 79.011] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 79.011] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 79.011] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 79.011] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 79.011] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 79.011] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 79.011] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 79.011] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 79.011] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 79.011] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 79.011] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 79.011] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 79.011] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 79.011] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 79.011] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 79.011] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 79.012] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 79.012] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 79.012] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 79.012] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 79.012] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 79.012] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 79.012] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 79.012] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 79.012] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 79.012] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 79.012] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 79.012] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 79.012] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 79.012] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 79.012] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 79.020] (II) modeset(0): EDID for output HDMI-1
[ 79.020] (II) modeset(0): Output eDP-1 connected
[ 79.020] (II) modeset(0): Output HDMI-1 disconnected
[ 79.020] (II) modeset(0): Using exact sizes for initial modes
[ 79.020] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 79.020] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 79.020] (==) modeset(0): DPI set to (96, 96)
[ 79.020] (II) Loading sub module "fb"
[ 79.020] (II) LoadModule: "fb"
[ 79.020] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 79.020] (II) Module fb: vendor="X.Org Foundation"
[ 79.020] compiled for 1.20.13, module version = 1.0.0
[ 79.020] ABI class: X.Org ANSI C Emulation, version 0.4
[ 79.020] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[ 79.020] (==) NVIDIA(G0): RGB weight 888
[ 79.020] (==) NVIDIA(G0): Default visual is TrueColor
[ 79.020] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 79.020] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 79.020] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[ 79.020] (**) NVIDIA(G0): Enabling 2D acceleration
[ 79.020] (II) Loading sub module "glxserver_nvidia"
[ 79.020] (II) LoadModule: "glxserver_nvidia"
[ 79.020] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 79.024] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 79.024] compiled for 1.6.99.901, module version = 1.0.0
[ 79.024] Module class: X.Org Server Extension
[ 79.024] (II) NVIDIA GLX Module 470.63.01 Tue Aug 3 20:35:52 UTC 2021
[ 79.024] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 79.025] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce MX250 (GP108-A) at PCI:6:0:0
[ 79.025] (II) NVIDIA(G0): (GPU-0)
[ 79.025] (--) NVIDIA(G0): Memory: 2097152 kBytes
[ 79.025] (--) NVIDIA(G0): VideoBIOS: 86.08.2a.00.85
[ 79.025] (II) NVIDIA(G0): Detected PCI Express Link width: 4X
[ 79.026] (II) NVIDIA(G0): Validated MetaModes:
[ 79.026] (II) NVIDIA(G0): "NULL"
[ 79.026] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[ 79.026] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[ 79.026] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[ 79.068] (==) modeset(0): Backing store enabled
[ 79.068] (==) modeset(0): Silken mouse disabled
[ 79.141] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 79.141] (==) modeset(0): DPMS enabled
[ 79.141] (II) modeset(0): [DRI2] Setup complete
[ 79.141] (II) modeset(0): [DRI2] DRI driver: iris
[ 79.141] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 79.142] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 79.142] (II) NVIDIA: access.
[ 79.146] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 79.146] (II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X
[ 79.146] (II) NVIDIA(G0): configuration option may not be set correctly. When the
[ 79.146] (II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will
[ 79.146] (II) NVIDIA(G0): try to use it to receive ACPI event notifications. For
[ 79.146] (II) NVIDIA(G0): details, please see the "ConnectToAcpid" and
[ 79.146] (II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 79.146] (II) NVIDIA(G0): Config Options in the README.
[ 79.172] (II) NVIDIA(G0): Setting mode "NULL"
[ 79.177] (==) NVIDIA(G0): Disabling shared memory pixmaps
[ 79.177] (==) NVIDIA(G0): Backing store enabled
[ 79.177] (==) NVIDIA(G0): Silken mouse disabled
[ 79.177] (==) NVIDIA(G0): DPMS enabled
[ 79.177] (II) Loading sub module "dri2"
[ 79.177] (II) LoadModule: "dri2"
[ 79.177] (II) Module "dri2" already built-in
[ 79.177] (II) NVIDIA(G0): [DRI2] Setup complete
[ 79.177] (II) NVIDIA(G0): [DRI2] VDPAU driver: nvidia
[ 79.177] (II) Initializing extension Generic Event Extension
[ 79.177] (II) Initializing extension SHAPE
[ 79.177] (II) Initializing extension MIT-SHM
[ 79.177] (II) Initializing extension XInputExtension
[ 79.177] (II) Initializing extension XTEST
[ 79.177] (II) Initializing extension BIG-REQUESTS
[ 79.177] (II) Initializing extension SYNC
[ 79.177] (II) Initializing extension XKEYBOARD
[ 79.177] (II) Initializing extension XC-MISC
[ 79.177] (II) Initializing extension SECURITY
[ 79.177] (II) Initializing extension XFIXES
[ 79.177] (II) Initializing extension RENDER
[ 79.177] (II) Initializing extension RANDR
[ 79.177] (II) Initializing extension COMPOSITE
[ 79.177] (II) Initializing extension DAMAGE
[ 79.177] (II) Initializing extension MIT-SCREEN-SAVER
[ 79.177] (II) Initializing extension DOUBLE-BUFFER
[ 79.177] (II) Initializing extension RECORD
[ 79.177] (II) Initializing extension DPMS
[ 79.177] (II) Initializing extension Present
[ 79.177] (II) Initializing extension DRI3
[ 79.177] (II) Initializing extension X-Resource
[ 79.177] (II) Initializing extension XVideo
[ 79.177] (II) Initializing extension XVideo-MotionCompensation
[ 79.177] (II) Initializing extension GLX
[ 79.177] (II) Initializing extension GLX
[ 79.177] (II) Indirect GLX disabled.
[ 79.183] (II) AIGLX: Loaded and initialized iris
[ 79.183] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 79.183] (II) Initializing extension XFree86-VidModeExtension
[ 79.183] (II) Initializing extension XFree86-DGA
[ 79.183] (II) Initializing extension XFree86-DRI
[ 79.183] (II) Initializing extension DRI2
[ 79.183] (II) Initializing extension NV-GLX
[ 79.183] (II) Initializing extension NV-CONTROL
[ 79.183] (II) modeset(0): Damage tracking initialized
[ 79.183] (II) modeset(0): Setting screen physical size to 508 x 285
[ 79.209] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 79.209] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 79.209] (**) Video Bus: Applying InputClass "system-keyboard"
[ 79.209] (II) LoadModule: "libinput"
[ 79.209] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 79.210] (II) Module libinput: vendor="X.Org Foundation"
[ 79.210] compiled for 1.20.11, module version = 1.1.0
[ 79.210] Module class: X.Org XInput Driver
[ 79.210] ABI class: X.Org XInput driver, version 24.1
[ 79.210] (II) Using input driver 'libinput' for 'Video Bus'
[ 79.210] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 37 paused 0
[ 79.210] (**) Video Bus: always reports core events
[ 79.210] (**) Option "Device" "/dev/input/event2"
[ 79.210] (**) Option "_source" "server/udev"
[ 79.211] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 79.212] (II) event2 - Video Bus: device is a keyboard
[ 79.212] (II) event2 - Video Bus: device removed
[ 79.212] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 79.212] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 79.212] (**) Option "xkb_model" "pc105"
[ 79.212] (**) Option "xkb_layout" "us,ru"
[ 79.212] (**) Option "xkb_variant" ",winkeys"
[ 79.212] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 79.227] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 79.227] (II) event2 - Video Bus: device is a keyboard
[ 79.227] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 79.227] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 79.227] (**) Video Bus: Applying InputClass "system-keyboard"
[ 79.227] (II) Using input driver 'libinput' for 'Video Bus'
[ 79.227] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 40 paused 0
[ 79.227] (**) Video Bus: always reports core events
[ 79.227] (**) Option "Device" "/dev/input/event3"
[ 79.227] (**) Option "_source" "server/udev"
[ 79.228] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 79.228] (II) event3 - Video Bus: device is a keyboard
[ 79.228] (II) event3 - Video Bus: device removed
[ 79.228] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:42/LNXVIDEO:01/input/input3/event3"
[ 79.228] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 79.228] (**) Option "xkb_model" "pc105"
[ 79.228] (**) Option "xkb_layout" "us,ru"
[ 79.228] (**) Option "xkb_variant" ",winkeys"
[ 79.228] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 79.229] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 79.229] (II) event3 - Video Bus: device is a keyboard
[ 79.229] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 79.229] (II) No input driver specified, ignoring this device.
[ 79.229] (II) This device may have been added with another device file.
[ 79.229] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 79.229] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 79.229] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 79.229] (II) Using input driver 'libinput' for 'Sleep Button'
[ 79.230] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 41 paused 0
[ 79.230] (**) Sleep Button: always reports core events
[ 79.230] (**) Option "Device" "/dev/input/event1"
[ 79.230] (**) Option "_source" "server/udev"
[ 79.230] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 79.230] (II) event1 - Sleep Button: device is a keyboard
[ 79.230] (II) event1 - Sleep Button: device removed
[ 79.230] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 79.230] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 79.230] (**) Option "xkb_model" "pc105"
[ 79.230] (**) Option "xkb_layout" "us,ru"
[ 79.230] (**) Option "xkb_variant" ",winkeys"
[ 79.230] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 79.231] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 79.231] (II) event1 - Sleep Button: device is a keyboard
[ 79.231] (II) config/udev: Adding input device Logitech Anywhere MX (/dev/input/event17)
[ 79.231] (**) Logitech Anywhere MX: Applying InputClass "libinput pointer catchall"
[ 79.231] (II) Using input driver 'libinput' for 'Logitech Anywhere MX'
[ 79.232] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 42 paused 0
[ 79.232] (**) Logitech Anywhere MX: always reports core events
[ 79.232] (**) Option "Device" "/dev/input/event17"
[ 79.232] (**) Option "_source" "server/udev"
[ 79.233] (II) event17 - Logitech Anywhere MX: is tagged by udev as: Mouse
[ 79.233] (II) event17 - Logitech Anywhere MX: device is a pointer
[ 79.233] (II) event17 - Logitech Anywhere MX: device removed
[ 79.233] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:1017.0005/input/input47/event17"
[ 79.233] (II) XINPUT: Adding extended input device "Logitech Anywhere MX" (type: MOUSE, id 9)
[ 79.233] (**) Option "AccelerationScheme" "none"
[ 79.233] (**) Logitech Anywhere MX: (accel) selected scheme none/0
[ 79.233] (**) Logitech Anywhere MX: (accel) acceleration factor: 2.000
[ 79.233] (**) Logitech Anywhere MX: (accel) acceleration threshold: 4
[ 79.234] (II) event17 - Logitech Anywhere MX: is tagged by udev as: Mouse
[ 79.234] (II) event17 - Logitech Anywhere MX: device is a pointer
[ 79.234] (II) config/udev: Adding input device Logitech Anywhere MX (/dev/input/mouse2)
[ 79.234] (II) No input driver specified, ignoring this device.
[ 79.234] (II) This device may have been added with another device file.
[ 79.235] (II) config/udev: Adding input device Logitech K270 (/dev/input/event19)
[ 79.235] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[ 79.235] (**) Logitech K270: Applying InputClass "system-keyboard"
[ 79.235] (II) Using input driver 'libinput' for 'Logitech K270'
[ 79.235] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 43 paused 0
[ 79.235] (**) Logitech K270: always reports core events
[ 79.235] (**) Option "Device" "/dev/input/event19"
[ 79.235] (**) Option "_source" "server/udev"
[ 79.236] (II) event19 - Logitech K270: is tagged by udev as: Keyboard
[ 79.236] (II) event19 - Logitech K270: device is a keyboard
[ 79.236] (II) event19 - Logitech K270: device removed
[ 79.236] (II) libinput: Logitech K270: needs a virtual subdevice
[ 79.236] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4003.0007/input/input49/event19"
[ 79.236] (II) XINPUT: Adding extended input device "Logitech K270" (type: MOUSE, id 10)
[ 79.236] (**) Option "AccelerationScheme" "none"
[ 79.236] (**) Logitech K270: (accel) selected scheme none/0
[ 79.236] (**) Logitech K270: (accel) acceleration factor: 2.000
[ 79.236] (**) Logitech K270: (accel) acceleration threshold: 4
[ 79.237] (II) event19 - Logitech K270: is tagged by udev as: Keyboard
[ 79.237] (II) event19 - Logitech K270: device is a keyboard
[ 79.237] (II) config/udev: Adding input device Logitech Wireless Device PID:4055 (/dev/input/event18)
[ 79.237] (**) Logitech Wireless Device PID:4055: Applying InputClass "libinput pointer catchall"
[ 79.237] (II) Using input driver 'libinput' for 'Logitech Wireless Device PID:4055'
[ 79.238] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 44 paused 0
[ 79.238] (**) Logitech Wireless Device PID:4055: always reports core events
[ 79.238] (**) Option "Device" "/dev/input/event18"
[ 79.238] (**) Option "_source" "server/udev"
[ 79.238] (II) event18 - Logitech Wireless Device PID:4055: is tagged by udev as: Mouse
[ 79.239] (II) event18 - Logitech Wireless Device PID:4055: device is a pointer
[ 79.239] (II) event18 - Logitech Wireless Device PID:4055: device removed
[ 79.239] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4055.0006/input/input48/event18"
[ 79.239] (II) XINPUT: Adding extended input device "Logitech Wireless Device PID:4055" (type: MOUSE, id 11)
[ 79.239] (**) Option "AccelerationScheme" "none"
[ 79.239] (**) Logitech Wireless Device PID:4055: (accel) selected scheme none/0
[ 79.239] (**) Logitech Wireless Device PID:4055: (accel) acceleration factor: 2.000
[ 79.239] (**) Logitech Wireless Device PID:4055: (accel) acceleration threshold: 4
[ 79.240] (II) event18 - Logitech Wireless Device PID:4055: is tagged by udev as: Mouse
[ 79.240] (II) event18 - Logitech Wireless Device PID:4055: device is a pointer
[ 79.240] (II) config/udev: Adding input device Logitech Wireless Device PID:4055 (/dev/input/mouse3)
[ 79.240] (II) No input driver specified, ignoring this device.
[ 79.240] (II) This device may have been added with another device file.
[ 79.241] (II) config/udev: Adding input device Logitech K370s/K375s (/dev/input/event21)
[ 79.241] (**) Logitech K370s/K375s: Applying InputClass "libinput keyboard catchall"
[ 79.241] (**) Logitech K370s/K375s: Applying InputClass "system-keyboard"
[ 79.241] (II) Using input driver 'libinput' for 'Logitech K370s/K375s'
[ 79.241] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 45 paused 0
[ 79.241] (**) Logitech K370s/K375s: always reports core events
[ 79.241] (**) Option "Device" "/dev/input/event21"
[ 79.241] (**) Option "_source" "server/udev"
[ 79.242] (II) event21 - Logitech K370s/K375s: is tagged by udev as: Keyboard
[ 79.242] (II) event21 - Logitech K370s/K375s: device is a keyboard
[ 79.242] (II) event21 - Logitech K370s/K375s: device removed
[ 79.242] (II) libinput: Logitech K370s/K375s: needs a virtual subdevice
[ 79.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4061.0008/input/input50/event21"
[ 79.242] (II) XINPUT: Adding extended input device "Logitech K370s/K375s" (type: MOUSE, id 12)
[ 79.242] (**) Option "AccelerationScheme" "none"
[ 79.242] (**) Logitech K370s/K375s: (accel) selected scheme none/0
[ 79.242] (**) Logitech K370s/K375s: (accel) acceleration factor: 2.000
[ 79.242] (**) Logitech K370s/K375s: (accel) acceleration threshold: 4
[ 79.243] (II) event21 - Logitech K370s/K375s: is tagged by udev as: Keyboard
[ 79.243] (II) event21 - Logitech K370s/K375s: device is a keyboard
[ 79.243] (II) config/udev: Adding input device Logitech M350 (/dev/input/event22)
[ 79.243] (**) Logitech M350: Applying InputClass "libinput pointer catchall"
[ 79.243] (II) Using input driver 'libinput' for 'Logitech M350'
[ 79.244] (II) systemd-logind: got fd for /dev/input/event22 13:86 fd 46 paused 0
[ 79.244] (**) Logitech M350: always reports core events
[ 79.244] (**) Option "Device" "/dev/input/event22"
[ 79.244] (**) Option "_source" "server/udev"
[ 79.245] (II) event22 - Logitech M350: is tagged by udev as: Mouse
[ 79.245] (II) event22 - Logitech M350: device is a pointer
[ 79.245] (II) event22 - Logitech M350: device removed
[ 79.245] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4080.0009/input/input51/event22"
[ 79.245] (II) XINPUT: Adding extended input device "Logitech M350" (type: MOUSE, id 13)
[ 79.245] (**) Option "AccelerationScheme" "none"
[ 79.245] (**) Logitech M350: (accel) selected scheme none/0
[ 79.245] (**) Logitech M350: (accel) acceleration factor: 2.000
[ 79.245] (**) Logitech M350: (accel) acceleration threshold: 4
[ 79.246] (II) event22 - Logitech M350: is tagged by udev as: Mouse
[ 79.246] (II) event22 - Logitech M350: device is a pointer
[ 79.246] (II) config/udev: Adding input device Logitech M350 (/dev/input/mouse4)
[ 79.246] (II) No input driver specified, ignoring this device.
[ 79.246] (II) This device may have been added with another device file.
[ 79.247] (II) config/udev: Adding input device HD WebCam: HD WebCam (/dev/input/event20)
[ 79.247] (**) HD WebCam: HD WebCam: Applying InputClass "libinput keyboard catchall"
[ 79.247] (**) HD WebCam: HD WebCam: Applying InputClass "system-keyboard"
[ 79.247] (II) Using input driver 'libinput' for 'HD WebCam: HD WebCam'
[ 79.247] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 47 paused 0
[ 79.247] (**) HD WebCam: HD WebCam: always reports core events
[ 79.247] (**) Option "Device" "/dev/input/event20"
[ 79.247] (**) Option "_source" "server/udev"
[ 79.248] (II) event20 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[ 79.248] (II) event20 - HD WebCam: HD WebCam: device is a keyboard
[ 79.248] (II) event20 - HD WebCam: HD WebCam: device removed
[ 79.248] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input26/event20"
[ 79.248] (II) XINPUT: Adding extended input device "HD WebCam: HD WebCam" (type: KEYBOARD, id 14)
[ 79.248] (**) Option "xkb_model" "pc105"
[ 79.248] (**) Option "xkb_layout" "us,ru"
[ 79.248] (**) Option "xkb_variant" ",winkeys"
[ 79.248] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 79.249] (II) event20 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[ 79.249] (II) event20 - HD WebCam: HD WebCam: device is a keyboard
[ 79.249] (II) config/udev: Adding input device ELAN0504:00 04F3:3091 Mouse (/dev/input/event15)
[ 79.249] (**) ELAN0504:00 04F3:3091 Mouse: Applying InputClass "libinput pointer catchall"
[ 79.249] (II) Using input driver 'libinput' for 'ELAN0504:00 04F3:3091 Mouse'
[ 79.250] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 48 paused 0
[ 79.250] (**) ELAN0504:00 04F3:3091 Mouse: always reports core events
[ 79.250] (**) Option "Device" "/dev/input/event15"
[ 79.250] (**) Option "_source" "server/udev"
[ 79.250] (II) event15 - ELAN0504:00 04F3:3091 Mouse: is tagged by udev as: Mouse Pointingstick
[ 79.250] (II) event15 - ELAN0504:00 04F3:3091 Mouse: device is a pointer
[ 79.251] (II) event15 - ELAN0504:00 04F3:3091 Mouse: device removed
[ 79.251] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input18/event15"
[ 79.251] (II) XINPUT: Adding extended input device "ELAN0504:00 04F3:3091 Mouse" (type: MOUSE, id 15)
[ 79.251] (**) Option "AccelerationScheme" "none"
[ 79.251] (**) ELAN0504:00 04F3:3091 Mouse: (accel) selected scheme none/0
[ 79.251] (**) ELAN0504:00 04F3:3091 Mouse: (accel) acceleration factor: 2.000
[ 79.251] (**) ELAN0504:00 04F3:3091 Mouse: (accel) acceleration threshold: 4
[ 79.252] (II) event15 - ELAN0504:00 04F3:3091 Mouse: is tagged by udev as: Mouse Pointingstick
[ 79.252] (II) event15 - ELAN0504:00 04F3:3091 Mouse: device is a pointer
[ 79.253] (II) config/udev: Adding input device ELAN0504:00 04F3:3091 Mouse (/dev/input/mouse0)
[ 79.253] (II) No input driver specified, ignoring this device.
[ 79.253] (II) This device may have been added with another device file.
[ 79.253] (II) config/udev: Adding input device ELAN0504:00 04F3:3091 Touchpad (/dev/input/event16)
[ 79.253] (**) ELAN0504:00 04F3:3091 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 79.253] (II) Using input driver 'libinput' for 'ELAN0504:00 04F3:3091 Touchpad'
[ 79.253] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 49 paused 0
[ 79.253] (**) ELAN0504:00 04F3:3091 Touchpad: always reports core events
[ 79.253] (**) Option "Device" "/dev/input/event16"
[ 79.253] (**) Option "_source" "server/udev"
[ 79.254] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: is tagged by udev as: Touchpad
[ 79.255] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: device is a touchpad
[ 79.255] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: device removed
[ 79.255] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN0504:00/0018:04F3:3091.0001/input/input20/event16"
[ 79.255] (II) XINPUT: Adding extended input device "ELAN0504:00 04F3:3091 Touchpad" (type: TOUCHPAD, id 16)
[ 79.256] (**) Option "AccelerationScheme" "none"
[ 79.256] (**) ELAN0504:00 04F3:3091 Touchpad: (accel) selected scheme none/0
[ 79.256] (**) ELAN0504:00 04F3:3091 Touchpad: (accel) acceleration factor: 2.000
[ 79.256] (**) ELAN0504:00 04F3:3091 Touchpad: (accel) acceleration threshold: 4
[ 79.256] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: is tagged by udev as: Touchpad
[ 79.257] (II) event16 - ELAN0504:00 04F3:3091 Touchpad: device is a touchpad
[ 79.258] (II) config/udev: Adding input device ELAN0504:00 04F3:3091 Touchpad (/dev/input/mouse1)
[ 79.258] (II) No input driver specified, ignoring this device.
[ 79.258] (II) This device may have been added with another device file.
[ 79.258] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[ 79.258] (II) No input driver specified, ignoring this device.
[ 79.258] (II) This device may have been added with another device file.
[ 79.258] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 79.258] (II) No input driver specified, ignoring this device.
[ 79.258] (II) This device may have been added with another device file.
[ 79.258] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event8)
[ 79.258] (II) No input driver specified, ignoring this device.
[ 79.258] (II) This device may have been added with another device file.
[ 79.259] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[ 79.259] (II) No input driver specified, ignoring this device.
[ 79.259] (II) This device may have been added with another device file.
[ 79.259] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event14)
[ 79.259] (II) No input driver specified, ignoring this device.
[ 79.259] (II) This device may have been added with another device file.
[ 79.259] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event9)
[ 79.259] (II) No input driver specified, ignoring this device.
[ 79.259] (II) This device may have been added with another device file.
[ 79.259] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[ 79.259] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 79.259] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 79.259] (II) Using input driver 'libinput' for 'Intel HID events'
[ 79.260] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 50 paused 0
[ 79.260] (**) Intel HID events: always reports core events
[ 79.260] (**) Option "Device" "/dev/input/event5"
[ 79.260] (**) Option "_source" "server/udev"
[ 79.260] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 79.260] (II) event5 - Intel HID events: device is a keyboard
[ 79.260] (II) event5 - Intel HID events: device removed
[ 79.260] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input5/event5"
[ 79.260] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 17)
[ 79.260] (**) Option "xkb_model" "pc105"
[ 79.260] (**) Option "xkb_layout" "us,ru"
[ 79.260] (**) Option "xkb_variant" ",winkeys"
[ 79.260] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 79.261] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 79.261] (II) event5 - Intel HID events: device is a keyboard
[ 79.261] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event6)
[ 79.261] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[ 79.261] (**) Intel HID 5 button array: Applying InputClass "system-keyboard"
[ 79.261] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[ 79.261] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 51 paused 0
[ 79.261] (**) Intel HID 5 button array: always reports core events
[ 79.261] (**) Option "Device" "/dev/input/event6"
[ 79.261] (**) Option "_source" "server/udev"
[ 79.262] (II) event6 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 79.262] (II) event6 - Intel HID 5 button array: device is a keyboard
[ 79.262] (II) event6 - Intel HID 5 button array: device removed
[ 79.262] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input6/event6"
[ 79.262] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 18)
[ 79.262] (**) Option "xkb_model" "pc105"
[ 79.262] (**) Option "xkb_layout" "us,ru"
[ 79.262] (**) Option "xkb_variant" ",winkeys"
[ 79.262] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 79.262] (II) event6 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 79.262] (II) event6 - Intel HID 5 button array: device is a keyboard
[ 79.263] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 79.263] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 79.263] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 79.263] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 79.263] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 52 paused 0
[ 79.263] (**) AT Translated Set 2 keyboard: always reports core events
[ 79.263] (**) Option "Device" "/dev/input/event4"
[ 79.263] (**) Option "_source" "server/udev"
[ 79.264] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 79.264] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 79.264] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 79.264] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 79.264] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 19)
[ 79.264] (**) Option "xkb_model" "pc105"
[ 79.264] (**) Option "xkb_layout" "us,ru"
[ 79.264] (**) Option "xkb_variant" ",winkeys"
[ 79.264] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 79.265] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 79.265] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 79.266] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 79.266] (II) No input driver specified, ignoring this device.
[ 79.266] (II) This device may have been added with another device file.
[ 79.267] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event10)
[ 79.267] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 79.267] (**) Acer WMI hotkeys: Applying InputClass "system-keyboard"
[ 79.267] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[ 79.267] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 53 paused 0
[ 79.267] (**) Acer WMI hotkeys: always reports core events
[ 79.267] (**) Option "Device" "/dev/input/event10"
[ 79.267] (**) Option "_source" "server/udev"
[ 79.268] (II) event10 - Acer WMI hotkeys: is tagged by udev as: Keyboard
[ 79.268] (II) event10 - Acer WMI hotkeys: device is a keyboard
[ 79.268] (II) event10 - Acer WMI hotkeys: device removed
[ 79.268] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event10"
[ 79.268] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 20)
[ 79.268] (**) Option "xkb_model" "pc105"
[ 79.268] (**) Option "xkb_layout" "us,ru"
[ 79.268] (**) Option "xkb_variant" ",winkeys"
[ 79.268] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 79.268] (II) event10 - Acer WMI hotkeys: is tagged by udev as: Keyboard
[ 79.268] (II) event10 - Acer WMI hotkeys: device is a keyboard
[ 79.281] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[ 79.281] (**) Logitech K270: Applying InputClass "system-keyboard"
[ 79.281] (II) Using input driver 'libinput' for 'Logitech K270'
[ 79.281] (II) systemd-logind: returning pre-existing fd for /dev/input/event19 13:83
[ 79.281] (**) Logitech K270: always reports core events
[ 79.281] (**) Option "Device" "/dev/input/event19"
[ 79.281] (**) Option "_source" "_driver/libinput"
[ 79.281] (II) libinput: Logitech K270: is a virtual subdevice
[ 79.281] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4003.0007/input/input49/event19"
[ 79.281] (II) XINPUT: Adding extended input device "Logitech K270" (type: KEYBOARD, id 21)
[ 79.281] (**) Option "xkb_model" "pc105"
[ 79.281] (**) Option "xkb_layout" "us,ru"
[ 79.281] (**) Option "xkb_variant" ",winkeys"
[ 79.281] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 79.281] (**) Logitech K370s/K375s: Applying InputClass "libinput keyboard catchall"
[ 79.281] (**) Logitech K370s/K375s: Applying InputClass "system-keyboard"
[ 79.281] (II) Using input driver 'libinput' for 'Logitech K370s/K375s'
[ 79.281] (II) systemd-logind: returning pre-existing fd for /dev/input/event21 13:85
[ 79.281] (**) Logitech K370s/K375s: always reports core events
[ 79.281] (**) Option "Device" "/dev/input/event21"
[ 79.281] (**) Option "_source" "_driver/libinput"
[ 79.281] (II) libinput: Logitech K370s/K375s: is a virtual subdevice
[ 79.281] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4061.0008/input/input50/event21"
[ 79.281] (II) XINPUT: Adding extended input device "Logitech K370s/K375s" (type: KEYBOARD, id 22)
[ 79.281] (**) Option "xkb_model" "pc105"
[ 79.281] (**) Option "xkb_layout" "us,ru"
[ 79.281] (**) Option "xkb_variant" ",winkeys"
[ 79.281] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 80.065] (EE) event22 - Logitech M350: client bug: event processing lagging behind by 19ms, your system is too slow
[ 80.074] (II) modeset(0): EDID vendor "CMN", prod id 5332
[ 80.075] (II) modeset(0): Printing DDC gathered Modelines:
[ 80.075] (II) modeset(0): Modeline "1920x1080"x0.0 152.84 1920 2000 2060 2250 1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[ 102.964] (II) modeset(0): EDID vendor "CMN", prod id 5332
[ 102.964] (II) modeset(0): Printing DDC gathered Modelines:
[ 102.964] (II) modeset(0): Modeline "1920x1080"x0.0 152.84 1920 2000 2060 2250 1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[ 102.998] (II) modeset(0): Allocate new frame buffer 1920x1200 stride
[ 106.205] (II) modeset(0): EDID vendor "CMN", prod id 5332
[ 106.206] (II) modeset(0): Printing DDC gathered Modelines:
[ 106.206] (II) modeset(0): Modeline "1920x1080"x0.0 152.84 1920 2000 2060 2250 1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[ 112.688] (II) modeset(0): Allocate new frame buffer 3840x1200 stride
[ 171.233] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[ 179.834] (II) modeset(0): EDID vendor "CMN", prod id 5332
[ 179.834] (II) modeset(0): Printing DDC gathered Modelines:
[ 179.834] (II) modeset(0): Modeline "1920x1080"x0.0 152.84 1920 2000 2060 2250 1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[ 193.316] (II) modeset(0): EDID vendor "CMN", prod id 5332
[ 193.316] (II) modeset(0): Printing DDC gathered Modelines:
[ 193.316] (II) modeset(0): Modeline "1920x1080"x0.0 152.84 1920 2000 2060 2250 1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[ 193.354] (II) modeset(0): Allocate new frame buffer 3840x1200 stride
[ 200.739] (II) modeset(0): EDID vendor "CMN", prod id 5332
[ 200.739] (II) modeset(0): Printing DDC gathered Modelines:
[ 200.739] (II) modeset(0): Modeline "1920x1080"x0.0 152.84 1920 2000 2060 2250 1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[ 200.800] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[ 757.395] (EE) event21 - Logitech K370s/K375s: client bug: event processing lagging behind by 17ms, your system is too slowIn Xorg.0.log I suspect:
(EE) modeset(0): failed to set mode: Permission deniedIn Xorg.1.log I see some errors about my keyboard and mouse but I think they are not related with the problem.
Last edited by FuzzySPb (2021-09-10 18:13:13)
Offline
#8 2021-09-10 14:33:53
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,720
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
hmm this suggests to me that there's no screen attached to the nvidia gpu (read as, nvidia is irrelevant for whatever display connection issue you might have) to confirm what's your output of
xrandr --listproviders
xrandr -qyou mention you can extend the display and it actually works, but the desktop doesn't extend like you expect it to? how did that look like when it used to work?
Offline
#9 2021-09-10 18:11:03
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
V1del wrote:
hmm this suggests to me that there's no screen attached to the nvidia gpu (read as, nvidia is irrelevant for whatever display connection issue you might have) to confirm what's your output of
xrandr --listproviders xrandr -qyou mention you can extend the display and it actually works, but the desktop doesn't extend like you expect it to? how did that look like when it used to work?
Ok, let me describe from power on. Boot messages are displayed on laptop display, then GDM login window appears and monitor connected via HDMI wakes up but there are nothing. Login is visible on laptop display.
External monitor shows now signal and goes to sleep after login and everything is displayed on laptop screen. This way it worked for long time and works now.
But then I may try to switch to external monitor with Win-P keyboard shortcut. In "Display" window I have 4 choices:
1) Laptop screen.
With this choice picture is only on laptop screen. It works now the same way as it worked before.
2) Mirror
There should be identical picture on both displays with this choice. And it was before, but common resolution was adjusted in not a good way and it was not very comfortable to use. Now external display wakes up when I choose this option, but there are no image on external display only black screen. Also laptop display changes it's resolution as if it tries to align it with external display. External display doesn't go sleep, i.e. it has incoming signal, but it is empty black screen.
3) Extend
It allows to have desktop spread across both displays. I.e. laptop display continues to the right on external display. External display became blue (the color of my desktop backgroun image) previously with this choice. Now it also wakes up but remains black. About mouse cursor - it is impossible to move cursor beyond the border of the screen - it stops at the border. But when I choose "Extend" I may move mouse cursor beyond right edge of the screen - it disappears there but it there are some space as it appears back also not immediately at the edge (it requires some more mouse move). Ah, end one more thing - I have 4 "destop miniatures" in linux taskbar. And their width extends twice as soon as I select this option. I.e. system really see and use 2nd monitor. But monitor remains black and not going to sleep.
4) External monitor
Here picture should be on external display only and it was there before. Now with this choice external display wakes up and doesn't go to sleep. But there are no picture, just black screen and backlight.
Outputs of commands:
[user@solid ~]$ xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x44 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x251 cap: 0x0 crtcs: 0 outputs: 0 associated providers: 0 name:NVIDIA-G0
[user@solid ~]$ xrandr -q
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
1920x1080 60.01*+ 60.01 59.97 59.96 59.93
1680x1050 59.95 59.88
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 59.98
800x450 59.95 59.82
640x512 60.02
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
640x400 59.88 59.98
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
HDMI-1 connected (normal left inverted right x axis y axis)
1920x1200 59.95 +
1920x1080 60.00 50.00 59.94
1920x1080i 60.00 50.00 59.94
1600x1200 60.00
1680x1050 59.88
1280x1024 60.02
1440x900 59.90
1280x960 60.00
1280x720 60.00 50.00 59.94
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 60.00 59.94
[user@solid ~]$Last edited by FuzzySPb (2021-09-13 13:58:39)
Offline
#10 2021-09-15 12:32:19
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
I haven't solved my problem yet. I checked all files that were changed on my filesystem since September, 8 and found nothing suspicious. Laptop works fine with TV via HDMI, no issues at all. And HP monitor works fine with another laptop...
With help of "Arch Linux Archive" I rolled back the whole system to 2021/09/05 and... it doesn't work either. Linux sees second monitor, it receives signal and shows correct video mode on a screen but the screen is black. It really sounds like a driver problem but I rolled it back and it doesn't woek either... Have no idea what might be the reason... The only thing I may imagine that 470.63.01-7 puts some microcode somehow inside GPU, then it works differently but older driver doesn't replace this microcode... Sounds weird but I have no other idea...
Offline
#11 2021-09-15 15:11:55
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,720
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
Not really. As suspected, the nvidia GPU is not connected to a screen and thus irrelevant for pure displaying purposes. (Unless you've done something to actively use it, did you do anything conscious here?)
if you manually configure it with xrandr, e.g. xrandr --auto and/or
xrandr --output eDP-1-1 --auto --right-of HDMI-1does it work/do you get an error message?
Last edited by V1del (2021-09-15 15:21:52)
Offline
#12 2021-09-15 15:25:34
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
Thanks, I'll try this command now.
But meanwhile, may you indicate how do you see that cable isn't connected? I'm asking as I tried with 3 different cables already (result is the same) and it with the same cable it works with TV. So I would like to check how it looks like when I'm connected to TV.
Offline
#13 2021-09-15 15:34:07
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,720
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
I don't that's just a suggestion because it so often is the reason for weird issues, but as you already seem to have tested that I doubt it's relevant.
Offline
#14 2021-09-15 15:38:26
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
Ok, my internal display is eDP-1, not eDP-1-1, so I modified command a bit:
[user@solid ~]$ xrandr --output eDP-1 --auto --right-of HDMI-1
[user@solid ~]$As you see it was executed without error. After it's execution everything disappeared from my screen (only desktop background remained). I.e. I assume it made my laptop screen secondary and everything went to primary external display. But... it remained black (while saying that it has incoming signal). So, I pressed Win-P keyboard combination to disconnect external screen and go back to laptop only.
Meanwhile I updated driver in windows (dual boot) to version 471 and it still works. I.e. under windows with the same hardware everything works with the latest driver.
I don't fully understand this question:
Unless you've done something to actively use it, did you do anything conscious here?
.
I didn't do anything special at moment when problem started. I just rebooted my PC after successful upgrade. So nothing special. But with regards to any other actions with GPU - I use it with CUDA for tensorflow from time to time... But I didn't do anything that I hadn't done before...
Last edited by FuzzySPb (2021-09-15 15:41:52)
Offline
#15 2021-09-15 15:43:43
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,720
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
Bit of a stretch, but try downgrading mesa to 21.1.6 . 21.2.1 has some known bugs on iris/intel and maybe there's something biting with the modeset DDX/GLAMOR
Last edited by V1del (2021-09-15 15:44:40)
Offline
#16 2021-09-15 15:50:49
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
Ok, I'll try it now.
By the way what "+" and "*" means in xrandr output?
I have "mirror" mode active now and see in "xrandr -q":
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 16384 x 16384
eDP-1 connected primary 1680x1050+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
1920x1080 60.01 + 60.01 59.97 59.96 59.93
1680x1050 59.95 59.88*
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 59.98
800x450 59.95 59.82
640x512 60.02
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
640x400 59.88 59.98
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
HDMI-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 59.95 +
1920x1080 60.00 50.00 59.94
1920x1080i 60.00 50.00 59.94
1600x1200 60.00
1680x1050 59.88*
1280x1024 60.02
1440x900 59.90
1280x960 60.00
1280x720 60.00 50.00 59.94
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 60.00 59.94 I may assume that "+" shows native panel resolution. And "*" is active mode, right? Because I see both eDP and HDMI shows "1680x1050" at 59.88 and monitor OSD shows "1680x1050 - 60 Hz"
Offline
#17 2021-09-15 15:57:15
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
V1del wrote:
Bit of a stretch, but try downgrading mesa to 21.1.6 . 21.2.1 has some known bugs on iris/intel and maybe there's something biting with the modeset DDX/GLAMOR
No, it didn't help unfortunately.
[user@solid ~]$ pacman -Q | grep mesa
mesa 21.1.6-1
[user@solid ~]$and everything is the same....
I played a bit with xrandr:
1) xrandr --output HDMI-1 --off
as result monitor goes to sleep
2) xrandr --output HDMI-1 --auto
monitor wakes up
Last edited by FuzzySPb (2021-09-15 16:05:52)
Offline
#18 2021-09-15 16:39:35
- FuzzySPb
- Member
- Registered: 2013-01-21
- Posts: 46
Re: [SOLVED] Problem with HP ZR2440w as 2nd monitor after recent upgrade
This is really WEIRD. It appears I hit the same bug as described here - https://bugs.launchpad.net/ubuntu/+sour … ug/1871721
The weirdest thing - I followed the comment #29 from slovic there. First I thougth "what a weird guy..." But after 5 days I'm really out of ideas... so, yes, I simply pulled the cord and powered it off for a minute... Then I plugged it back, nothing changed at first sight... but then I pressed Win-P again, selected "Extend" and voila - it works!
I didn't believe that comment and it still sounds weird for me. Because I already switched everything on/off multiple times and even resetted my monitor to factory settings. But... now it works.
Anyway I still don't know what to do next 
I'm just afraid to switch it off now
Updated.
Ok, I rebooted the system. And it still works. Crossing fingers, will observe its behavior...
Last edited by FuzzySPb (2021-09-15 17:26:28)
Offline