You are not logged in.
Hello
Some days ago, maybe a week, I noticed that my screen was a little bit "sluggish". After some investigation, I found that the framerate was 30fps instead of the usual 60fps. I'm using the DisplayPort output.
GPU model:
$> lspci -v | grep -A1 -e VGA -e 3D
09:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga PRO [Radeon R9 285/380] (rev f1) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device 22bb
Xorg log from ~/.local/share/xorg/Xorg.0.log:
[ 12.374] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 12.374]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[ 12.374] Build Operating System: Linux Archlinux
[ 12.374] Current Operating System: Linux esthar 5.10.71-1-lts #1 SMP Wed, 06 Oct 2021 14:19:52 +0000 x86_64
[ 12.374] Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux-lts.img rw root=PARTLABEL=Arch zswap.enabled=1 zswap.zpool=z3fold pci=noaer
[ 12.374] Build Date: 04 August 2021 08:13:54AM
[ 12.374]
[ 12.374] Current version of pixman: 0.40.0
[ 12.374] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.374] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.374] (==) Log file: "/home/dkrm/.local/share/xorg/Xorg.0.log", Time: Thu Oct 14 11:40:16 2021
[ 12.378] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12.378] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.378] (==) No Layout section. Using the first Screen section.
[ 12.378] (==) No screen section available. Using defaults.
[ 12.378] (**) |-->Screen "Default Screen Section" (0)
[ 12.378] (**) | |-->Monitor "<default monitor>"
[ 12.378] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.378] (==) Automatically adding devices
[ 12.378] (==) Automatically enabling devices
[ 12.378] (==) Automatically adding GPU devices
[ 12.378] (==) Automatically binding GPU devices
[ 12.378] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 12.380] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 12.380] Entry deleted from font path.
[ 12.380] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 12.380] Entry deleted from font path.
[ 12.382] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 12.382] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.382] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.382] (II) Module ABI versions:
[ 12.382] X.Org ANSI C Emulation: 0.4
[ 12.382] X.Org Video Driver: 24.1
[ 12.382] X.Org XInput driver : 24.1
[ 12.382] X.Org Server Extension : 10.0
[ 12.382] (++) using VT number 1
[ 12.383] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 12.384] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12.384] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 12.387] (--) PCI:*(9@0:0:0) 1002:6939:1458:22bb rev 241, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfcf00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[ 12.387] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 12.387] (II) LoadModule: "glx"
[ 12.387] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.393] (II) Module glx: vendor="X.Org Foundation"
[ 12.393] compiled for 1.20.13, module version = 1.0.0
[ 12.393] ABI class: X.Org Server Extension, version 10.0
[ 12.393] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 12.393] loading driver: amdgpu
[ 12.393] (==) Matched amdgpu as autoconfigured driver 0
[ 12.393] (==) Matched ati as autoconfigured driver 1
[ 12.393] (==) Matched modesetting as autoconfigured driver 2
[ 12.393] (==) Matched fbdev as autoconfigured driver 3
[ 12.393] (==) Matched vesa as autoconfigured driver 4
[ 12.393] (==) Assigned the driver to the xf86ConfigLayout
[ 12.393] (II) LoadModule: "amdgpu"
[ 12.394] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 12.397] (II) Module amdgpu: vendor="X.Org Foundation"
[ 12.397] compiled for 1.20.13, module version = 21.0.0
[ 12.397] Module class: X.Org Video Driver
[ 12.397] ABI class: X.Org Video Driver, version 24.1
[ 12.397] (II) LoadModule: "ati"
[ 12.397] (WW) Warning, couldn't open module ati
[ 12.397] (EE) Failed to load module "ati" (module does not exist, 0)
[ 12.397] (II) LoadModule: "modesetting"
[ 12.397] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 12.398] (II) Module modesetting: vendor="X.Org Foundation"
[ 12.398] compiled for 1.20.13, module version = 1.20.13
[ 12.398] Module class: X.Org Video Driver
[ 12.398] ABI class: X.Org Video Driver, version 24.1
[ 12.398] (II) LoadModule: "fbdev"
[ 12.398] (WW) Warning, couldn't open module fbdev
[ 12.398] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 12.398] (II) LoadModule: "vesa"
[ 12.398] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 12.398] (II) Module vesa: vendor="X.Org Foundation"
[ 12.398] compiled for 1.20.9, module version = 2.5.0
[ 12.398] Module class: X.Org Video Driver
[ 12.398] ABI class: X.Org Video Driver, version 24.1
[ 12.398] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 12.398] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 12.398] (II) VESA: driver for VESA chipsets: vesa
[ 12.398] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 12.399] (WW) Falling back to old probe method for modesetting
[ 12.399] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 12.399] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.399] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 12.399] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 12.399] (==) AMDGPU(0): Default visual is TrueColor
[ 12.399] (==) AMDGPU(0): RGB weight 888
[ 12.399] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 12.399] (--) AMDGPU(0): Chipset: "AMD Radeon (TM) R9 380 Series" (ChipID = 0x6939)
[ 12.399] (II) Loading sub module "fb"
[ 12.399] (II) LoadModule: "fb"
[ 12.399] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.400] (II) Module fb: vendor="X.Org Foundation"
[ 12.400] compiled for 1.20.13, module version = 1.0.0
[ 12.400] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.400] (II) Loading sub module "dri2"
[ 12.400] (II) LoadModule: "dri2"
[ 12.400] (II) Module "dri2" already built-in
[ 12.543] (II) Loading sub module "glamoregl"
[ 12.543] (II) LoadModule: "glamoregl"
[ 12.543] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 12.549] (II) Module glamoregl: vendor="X.Org Foundation"
[ 12.549] compiled for 1.20.13, module version = 1.0.1
[ 12.549] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.565] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon (TM) R9 380 Series (TONGA, DRM 3.40.0, 5.10.71-1-lts, LLVM 12.0.1)
[ 12.565] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 12.565] (==) AMDGPU(0): TearFree property default: auto
[ 12.565] (==) AMDGPU(0): VariableRefresh: disabled
[ 12.565] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 12.565] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 12.565] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 12.565] (II) AMDGPU(0): Output DVI-D-0 has no monitor section
[ 12.566] (II) AMDGPU(0): Output DVI-D-1 has no monitor section
[ 12.591] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 12.591] (II) AMDGPU(0): Manufacturer: ACR Model: 690 Serial#: 2233483466
[ 12.591] (II) AMDGPU(0): Year: 2018 Week: 52
[ 12.591] (II) AMDGPU(0): EDID Version: 1.4
[ 12.591] (II) AMDGPU(0): Digital Display Input
[ 12.591] (II) AMDGPU(0): 10 bits per channel
[ 12.591] (II) AMDGPU(0): Digital interface is DisplayPort
[ 12.591] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 12.591] (II) AMDGPU(0): Gamma: 2.20
[ 12.591] (II) AMDGPU(0): DPMS capabilities: Off
[ 12.591] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 12.591] (II) AMDGPU(0): First detailed timing is preferred mode
[ 12.591] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 12.591] (II) AMDGPU(0): Display is continuous-frequency
[ 12.591] (II) AMDGPU(0): redX: 0.655 redY: 0.331 greenX: 0.294 greenY: 0.619
[ 12.591] (II) AMDGPU(0): blueX: 0.147 blueY: 0.052 whiteX: 0.313 whiteY: 0.329
[ 12.592] (II) AMDGPU(0): Supported established timings:
[ 12.592] (II) AMDGPU(0): 640x480@60Hz
[ 12.592] (II) AMDGPU(0): 800x600@56Hz
[ 12.592] (II) AMDGPU(0): 800x600@60Hz
[ 12.592] (II) AMDGPU(0): 1024x768@60Hz
[ 12.592] (II) AMDGPU(0): Manufacturer's mask: 0
[ 12.592] (II) AMDGPU(0): Supported standard timings:
[ 12.592] (II) AMDGPU(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 12.592] (II) AMDGPU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 12.592] (II) AMDGPU(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 12.592] (II) AMDGPU(0): #3: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 12.592] (II) AMDGPU(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 12.592] (II) AMDGPU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 12.592] (II) AMDGPU(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 12.592] (II) AMDGPU(0): Supported detailed timing:
[ 12.592] (II) AMDGPU(0): clock: 533.2 MHz Image Size: 596 x 335 mm
[ 12.592] (II) AMDGPU(0): h_active: 3840 h_sync: 3888 h_sync_end 3920 h_blank_end 4000 h_border: 0
[ 12.592] (II) AMDGPU(0): v_active: 2160 v_sync: 2163 v_sync_end 2168 v_blanking: 2222 v_border: 0
[ 12.592] (II) AMDGPU(0): Supported detailed timing:
[ 12.592] (II) AMDGPU(0): clock: 241.5 MHz Image Size: 596 x 335 mm
[ 12.592] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 12.592] (II) AMDGPU(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
[ 12.592] (II) AMDGPU(0): Ranges: V min: 40 V max: 60 Hz, H min: 160 H max: 160 kHz, PixClock max 605 MHz
[ 12.592] (II) AMDGPU(0): Monitor name: Acer VG270K
[ 12.592] (II) AMDGPU(0): Supported detailed timing:
[ 12.592] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 596 x 335 mm
[ 12.592] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 12.592] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 12.592] (II) AMDGPU(0): Supported detailed timing:
[ 12.592] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 596 x 335 mm
[ 12.592] (II) AMDGPU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 12.592] (II) AMDGPU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 12.592] (II) AMDGPU(0): Supported detailed timing:
[ 12.592] (II) AMDGPU(0): clock: 27.0 MHz Image Size: 596 x 335 mm
[ 12.592] (II) AMDGPU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 12.592] (II) AMDGPU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 12.592] (II) AMDGPU(0): Number of EDID sections to follow: 1
[ 12.592] (II) AMDGPU(0): EDID (in hex):
[ 12.592] (II) AMDGPU(0): 00ffffffffffff0004729006ca402085
[ 12.592] (II) AMDGPU(0): 341c0104b53c22783bf6d5a7544b9e25
[ 12.592] (II) AMDGPU(0): 0d50542308008140818081c081009500
[ 12.592] (II) AMDGPU(0): b300d1c001014dd000a0f0703e803020
[ 12.592] (II) AMDGPU(0): 3500544f2100001a565e00a0a0a02950
[ 12.592] (II) AMDGPU(0): 30203500544f2100001e000000fd0028
[ 12.592] (II) AMDGPU(0): 3ca0a03c010a202020202020000000fc
[ 12.592] (II) AMDGPU(0): 00416365722056473237304b0a200184
[ 12.592] (II) AMDGPU(0): 02032bf150010304121305141f900702
[ 12.592] (II) AMDGPU(0): 5d5e5f606123090707830100006d030c
[ 12.592] (II) AMDGPU(0): 0010003878200060010203023a801871
[ 12.592] (II) AMDGPU(0): 382d40582c4500544f2100001e011d00
[ 12.592] (II) AMDGPU(0): 7251d01e206e285500544f2100001e8c
[ 12.592] (II) AMDGPU(0): 0ad08a20e02d10103e9600544f210000
[ 12.592] (II) AMDGPU(0): 18000000000000000000000000000000
[ 12.592] (II) AMDGPU(0): 000000000000000000000000000000f8
[ 12.592] (--) AMDGPU(0): HDMI max TMDS frequency 600000KHz
[ 12.592] (II) AMDGPU(0): Printing probed modes for output DisplayPort-0
[ 12.592] (II) AMDGPU(0): Modeline "3840x2160"x30.0 297.00 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "3840x2160"x25.0 297.00 3840 4896 4984 5280 2160 2168 2178 2250 +hsync +vsync (56.2 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "3840x2160"x24.0 297.00 3840 5116 5204 5500 2160 2168 2178 2250 +hsync +vsync (54.0 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "3840x2160"x30.0 296.70 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "3840x2160"x24.0 296.70 3840 5116 5204 5500 2160 2168 2178 2250 +hsync +vsync (53.9 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync +vsync (88.8 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 12.592] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 12.592] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 12.592] (II) AMDGPU(0): EDID for output DVI-D-0
[ 12.592] (II) AMDGPU(0): EDID for output DVI-D-1
[ 12.592] (II) AMDGPU(0): Output DisplayPort-0 connected
[ 12.592] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 12.592] (II) AMDGPU(0): Output DVI-D-0 disconnected
[ 12.592] (II) AMDGPU(0): Output DVI-D-1 disconnected
[ 12.592] (II) AMDGPU(0): Using exact sizes for initial modes
[ 12.592] (II) AMDGPU(0): Output DisplayPort-0 using initial mode 3840x2160 +0+0
[ 12.592] (II) AMDGPU(0): mem size init: gart size :ff875000 vram size: s:fd72e000 visible:e93f000
[ 12.592] (==) AMDGPU(0): DPI set to (96, 96)
[ 12.592] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.592] (II) Loading sub module "ramdac"
[ 12.592] (II) LoadModule: "ramdac"
[ 12.592] (II) Module "ramdac" already built-in
[ 12.592] (II) UnloadModule: "modesetting"
[ 12.592] (II) Unloading modesetting
[ 12.592] (II) UnloadModule: "vesa"
[ 12.592] (II) Unloading vesa
[ 12.592] (II) AMDGPU(0): [DRI2] Setup complete
[ 12.592] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 12.592] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 12.592] (II) AMDGPU(0): Front buffer pitch: 15360 bytes
[ 12.594] (II) AMDGPU(0): SYNC extension fences enabled
[ 12.594] (II) AMDGPU(0): Present extension enabled
[ 12.594] (==) AMDGPU(0): DRI3 enabled
[ 12.594] (==) AMDGPU(0): Backing store enabled
[ 12.594] (II) AMDGPU(0): Direct rendering enabled
[ 12.614] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 12.614] (II) AMDGPU(0): Acceleration enabled
[ 12.614] (==) AMDGPU(0): DPMS enabled
[ 12.614] (==) AMDGPU(0): Silken mouse disabled
[ 12.614] (II) AMDGPU(0): Set up textured video (glamor)
[ 12.625] (II) Initializing extension Generic Event Extension
[ 12.625] (II) Initializing extension SHAPE
[ 12.625] (II) Initializing extension MIT-SHM
[ 12.625] (II) Initializing extension XInputExtension
[ 12.625] (II) Initializing extension XTEST
[ 12.625] (II) Initializing extension BIG-REQUESTS
[ 12.625] (II) Initializing extension SYNC
[ 12.625] (II) Initializing extension XKEYBOARD
[ 12.625] (II) Initializing extension XC-MISC
[ 12.625] (II) Initializing extension SECURITY
[ 12.625] (II) Initializing extension XFIXES
[ 12.625] (II) Initializing extension RENDER
[ 12.625] (II) Initializing extension RANDR
[ 12.625] (II) Initializing extension COMPOSITE
[ 12.625] (II) Initializing extension DAMAGE
[ 12.625] (II) Initializing extension MIT-SCREEN-SAVER
[ 12.625] (II) Initializing extension DOUBLE-BUFFER
[ 12.625] (II) Initializing extension RECORD
[ 12.625] (II) Initializing extension DPMS
[ 12.625] (II) Initializing extension Present
[ 12.625] (II) Initializing extension DRI3
[ 12.625] (II) Initializing extension X-Resource
[ 12.625] (II) Initializing extension XVideo
[ 12.625] (II) Initializing extension XVideo-MotionCompensation
[ 12.625] (II) Initializing extension GLX
[ 12.630] (II) AIGLX: Loaded and initialized radeonsi
[ 12.630] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 12.630] (II) Initializing extension XFree86-VidModeExtension
[ 12.630] (II) Initializing extension XFree86-DGA
[ 12.630] (II) Initializing extension XFree86-DRI
[ 12.630] (II) Initializing extension DRI2
[ 12.630] (II) AMDGPU(0): Setting screen physical size to 1016 x 571
[ 12.960] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 12.960] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 12.960] (**) Power Button: Applying InputClass "system-keyboard"
[ 12.960] (II) LoadModule: "libinput"
[ 12.960] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 12.963] (II) Module libinput: vendor="X.Org Foundation"
[ 12.963] compiled for 1.20.13, module version = 1.2.0
[ 12.963] Module class: X.Org XInput Driver
[ 12.963] ABI class: X.Org XInput driver, version 24.1
[ 12.963] (II) Using input driver 'libinput' for 'Power Button'
[ 12.964] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 19 paused 0
[ 12.964] (**) Power Button: always reports core events
[ 12.964] (**) Option "Device" "/dev/input/event1"
[ 12.964] (**) Option "_source" "server/udev"
[ 12.972] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 12.972] (II) event1 - Power Button: device is a keyboard
[ 12.972] (II) event1 - Power Button: device removed
[ 12.972] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 12.972] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 12.972] (**) Option "xkb_model" "tm2030USB"
[ 12.972] (**) Option "xkb_layout" "us"
[ 12.972] (**) Option "xkb_variant" "altgr-intl"
[ 12.989] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 12.989] (II) event1 - Power Button: device is a keyboard
[ 12.989] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 12.989] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 12.989] (**) Power Button: Applying InputClass "system-keyboard"
[ 12.989] (II) Using input driver 'libinput' for 'Power Button'
[ 12.990] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 22 paused 0
[ 12.990] (**) Power Button: always reports core events
[ 12.990] (**) Option "Device" "/dev/input/event0"
[ 12.990] (**) Option "_source" "server/udev"
[ 12.990] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 12.990] (II) event0 - Power Button: device is a keyboard
[ 12.990] (II) event0 - Power Button: device removed
[ 12.990] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 12.990] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 12.990] (**) Option "xkb_model" "tm2030USB"
[ 12.990] (**) Option "xkb_layout" "us"
[ 12.990] (**) Option "xkb_variant" "altgr-intl"
[ 12.991] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 12.991] (II) event0 - Power Button: device is a keyboard
[ 12.991] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event2)
[ 12.991] (II) No input driver specified, ignoring this device.
[ 12.991] (II) This device may have been added with another device file.
[ 12.992] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event3)
[ 12.992] (II) No input driver specified, ignoring this device.
[ 12.992] (II) This device may have been added with another device file.
[ 12.992] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event4)
[ 12.992] (II) No input driver specified, ignoring this device.
[ 12.992] (II) This device may have been added with another device file.
[ 12.992] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event5)
[ 12.992] (II) No input driver specified, ignoring this device.
[ 12.992] (II) This device may have been added with another device file.
[ 12.992] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event6)
[ 12.992] (II) No input driver specified, ignoring this device.
[ 12.992] (II) This device may have been added with another device file.
[ 12.992] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event7)
[ 12.992] (II) No input driver specified, ignoring this device.
[ 12.992] (II) This device may have been added with another device file.
[ 12.993] (II) config/udev: Adding input device ZSA Ergodox EZ (/dev/input/event13)
[ 12.993] (**) ZSA Ergodox EZ: Applying InputClass "libinput keyboard catchall"
[ 12.993] (**) ZSA Ergodox EZ: Applying InputClass "system-keyboard"
[ 12.993] (II) Using input driver 'libinput' for 'ZSA Ergodox EZ'
[ 12.993] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 23 paused 0
[ 12.993] (**) ZSA Ergodox EZ: always reports core events
[ 12.993] (**) Option "Device" "/dev/input/event13"
[ 12.993] (**) Option "_source" "server/udev"
[ 12.994] (II) event13 - ZSA Ergodox EZ: is tagged by udev as: Keyboard
[ 12.994] (II) event13 - ZSA Ergodox EZ: device is a keyboard
[ 12.994] (II) event13 - ZSA Ergodox EZ: device removed
[ 12.994] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-2/3-2.2/3-2.2:1.0/0003:FEED:1307.0002/input/input13/event13"
[ 12.994] (II) XINPUT: Adding extended input device "ZSA Ergodox EZ" (type: KEYBOARD, id 8)
[ 12.994] (**) Option "xkb_model" "tm2030USB"
[ 12.994] (**) Option "xkb_layout" "us"
[ 12.994] (**) Option "xkb_variant" "altgr-intl"
[ 12.995] (II) event13 - ZSA Ergodox EZ: is tagged by udev as: Keyboard
[ 12.995] (II) event13 - ZSA Ergodox EZ: device is a keyboard
[ 12.996] (II) config/udev: Adding input device ZSA Ergodox EZ Mouse (/dev/input/event14)
[ 12.996] (**) ZSA Ergodox EZ Mouse: Applying InputClass "libinput pointer catchall"
[ 12.996] (II) Using input driver 'libinput' for 'ZSA Ergodox EZ Mouse'
[ 12.996] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 24 paused 0
[ 12.996] (**) ZSA Ergodox EZ Mouse: always reports core events
[ 12.997] (**) Option "Device" "/dev/input/event14"
[ 12.997] (**) Option "_source" "server/udev"
[ 12.997] (II) event14 - ZSA Ergodox EZ Mouse: is tagged by udev as: Mouse
[ 12.998] (II) event14 - ZSA Ergodox EZ Mouse: device is a pointer
[ 12.998] (II) event14 - ZSA Ergodox EZ Mouse: device removed
[ 12.998] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-2/3-2.2/3-2.2:1.1/0003:FEED:1307.0003/input/input14/event14"
[ 12.998] (II) XINPUT: Adding extended input device "ZSA Ergodox EZ Mouse" (type: MOUSE, id 9)
[ 12.998] (**) Option "AccelerationScheme" "none"
[ 12.998] (**) ZSA Ergodox EZ Mouse: (accel) selected scheme none/0
[ 12.998] (**) ZSA Ergodox EZ Mouse: (accel) acceleration factor: 2.000
[ 12.998] (**) ZSA Ergodox EZ Mouse: (accel) acceleration threshold: 4
[ 12.999] (II) event14 - ZSA Ergodox EZ Mouse: is tagged by udev as: Mouse
[ 12.999] (II) event14 - ZSA Ergodox EZ Mouse: device is a pointer
[ 12.999] (II) config/udev: Adding input device ZSA Ergodox EZ Mouse (/dev/input/mouse0)
[ 12.999] (II) No input driver specified, ignoring this device.
[ 12.999] (II) This device may have been added with another device file.
[ 13.000] (II) config/udev: Adding input device ZSA Ergodox EZ System Control (/dev/input/event15)
[ 13.000] (**) ZSA Ergodox EZ System Control: Applying InputClass "libinput keyboard catchall"
[ 13.000] (**) ZSA Ergodox EZ System Control: Applying InputClass "system-keyboard"
[ 13.000] (II) Using input driver 'libinput' for 'ZSA Ergodox EZ System Control'
[ 13.000] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 25 paused 0
[ 13.000] (**) ZSA Ergodox EZ System Control: always reports core events
[ 13.000] (**) Option "Device" "/dev/input/event15"
[ 13.000] (**) Option "_source" "server/udev"
[ 13.001] (II) event15 - ZSA Ergodox EZ System Control: is tagged by udev as: Keyboard
[ 13.001] (II) event15 - ZSA Ergodox EZ System Control: device is a keyboard
[ 13.001] (II) event15 - ZSA Ergodox EZ System Control: device removed
[ 13.001] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-2/3-2.2/3-2.2:1.1/0003:FEED:1307.0003/input/input15/event15"
[ 13.001] (II) XINPUT: Adding extended input device "ZSA Ergodox EZ System Control" (type: KEYBOARD, id 10)
[ 13.001] (**) Option "xkb_model" "tm2030USB"
[ 13.001] (**) Option "xkb_layout" "us"
[ 13.001] (**) Option "xkb_variant" "altgr-intl"
[ 13.002] (II) event15 - ZSA Ergodox EZ System Control: is tagged by udev as: Keyboard
[ 13.002] (II) event15 - ZSA Ergodox EZ System Control: device is a keyboard
[ 13.003] (II) config/udev: Adding input device ZSA Ergodox EZ Consumer Control (/dev/input/event16)
[ 13.003] (**) ZSA Ergodox EZ Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 13.003] (**) ZSA Ergodox EZ Consumer Control: Applying InputClass "system-keyboard"
[ 13.003] (II) Using input driver 'libinput' for 'ZSA Ergodox EZ Consumer Control'
[ 13.003] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 26 paused 0
[ 13.003] (**) ZSA Ergodox EZ Consumer Control: always reports core events
[ 13.003] (**) Option "Device" "/dev/input/event16"
[ 13.003] (**) Option "_source" "server/udev"
[ 13.004] (II) event16 - ZSA Ergodox EZ Consumer Control: is tagged by udev as: Keyboard
[ 13.004] (II) event16 - ZSA Ergodox EZ Consumer Control: device is a keyboard
[ 13.005] (II) event16 - ZSA Ergodox EZ Consumer Control: device removed
[ 13.005] (II) libinput: ZSA Ergodox EZ Consumer Control: needs a virtual subdevice
[ 13.005] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-2/3-2.2/3-2.2:1.1/0003:FEED:1307.0003/input/input16/event16"
[ 13.005] (II) XINPUT: Adding extended input device "ZSA Ergodox EZ Consumer Control" (type: MOUSE, id 11)
[ 13.005] (**) Option "AccelerationScheme" "none"
[ 13.005] (**) ZSA Ergodox EZ Consumer Control: (accel) selected scheme none/0
[ 13.005] (**) ZSA Ergodox EZ Consumer Control: (accel) acceleration factor: 2.000
[ 13.005] (**) ZSA Ergodox EZ Consumer Control: (accel) acceleration threshold: 4
[ 13.005] (II) event16 - ZSA Ergodox EZ Consumer Control: is tagged by udev as: Keyboard
[ 13.006] (II) event16 - ZSA Ergodox EZ Consumer Control: device is a keyboard
[ 13.006] (II) config/udev: Adding input device ZSA Ergodox EZ Keyboard (/dev/input/event17)
[ 13.006] (**) ZSA Ergodox EZ Keyboard: Applying InputClass "libinput keyboard catchall"
[ 13.006] (**) ZSA Ergodox EZ Keyboard: Applying InputClass "system-keyboard"
[ 13.006] (II) Using input driver 'libinput' for 'ZSA Ergodox EZ Keyboard'
[ 13.006] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 27 paused 0
[ 13.007] (**) ZSA Ergodox EZ Keyboard: always reports core events
[ 13.007] (**) Option "Device" "/dev/input/event17"
[ 13.007] (**) Option "_source" "server/udev"
[ 13.007] (II) event17 - ZSA Ergodox EZ Keyboard: is tagged by udev as: Keyboard
[ 13.007] (II) event17 - ZSA Ergodox EZ Keyboard: device is a keyboard
[ 13.008] (II) event17 - ZSA Ergodox EZ Keyboard: device removed
[ 13.008] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-2/3-2.2/3-2.2:1.1/0003:FEED:1307.0003/input/input17/event17"
[ 13.008] (II) XINPUT: Adding extended input device "ZSA Ergodox EZ Keyboard" (type: KEYBOARD, id 12)
[ 13.008] (**) Option "xkb_model" "tm2030USB"
[ 13.008] (**) Option "xkb_layout" "us"
[ 13.008] (**) Option "xkb_variant" "altgr-intl"
[ 13.009] (II) event17 - ZSA Ergodox EZ Keyboard: is tagged by udev as: Keyboard
[ 13.009] (II) event17 - ZSA Ergodox EZ Keyboard: device is a keyboard
[ 13.009] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event18)
[ 13.009] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "libinput pointer catchall"
[ 13.009] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Wireless Mouse'
[ 13.080] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 28 paused 0
[ 13.080] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events
[ 13.080] (**) Option "Device" "/dev/input/event18"
[ 13.080] (**) Option "_source" "server/udev"
[ 13.081] (II) event18 - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[ 13.081] (II) event18 - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[ 13.081] (II) event18 - MOSART Semi. 2.4G Wireless Mouse: device removed
[ 13.081] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3:1.0/0003:062A:4106.0004/input/input18/event18"
[ 13.081] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 13)
[ 13.081] (**) Option "AccelerationScheme" "none"
[ 13.081] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) selected scheme none/0
[ 13.081] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[ 13.081] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[ 13.082] (II) event18 - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[ 13.082] (II) event18 - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[ 13.082] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse1)
[ 13.082] (II) No input driver specified, ignoring this device.
[ 13.082] (II) This device may have been added with another device file.
[ 13.083] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event19)
[ 13.083] (II) No input driver specified, ignoring this device.
[ 13.083] (II) This device may have been added with another device file.
[ 13.083] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event10)
[ 13.083] (II) No input driver specified, ignoring this device.
[ 13.083] (II) This device may have been added with another device file.
[ 13.083] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event11)
[ 13.083] (II) No input driver specified, ignoring this device.
[ 13.083] (II) This device may have been added with another device file.
[ 13.084] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event12)
[ 13.084] (II) No input driver specified, ignoring this device.
[ 13.084] (II) This device may have been added with another device file.
[ 13.084] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event8)
[ 13.084] (II) No input driver specified, ignoring this device.
[ 13.084] (II) This device may have been added with another device file.
[ 13.084] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event9)
[ 13.084] (II) No input driver specified, ignoring this device.
[ 13.084] (II) This device may have been added with another device file.
[ 13.088] (**) ZSA Ergodox EZ Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 13.088] (**) ZSA Ergodox EZ Consumer Control: Applying InputClass "system-keyboard"
[ 13.088] (II) Using input driver 'libinput' for 'ZSA Ergodox EZ Consumer Control'
[ 13.088] (II) systemd-logind: returning pre-existing fd for /dev/input/event16 13:80
[ 13.088] (**) ZSA Ergodox EZ Consumer Control: always reports core events
[ 13.088] (**) Option "Device" "/dev/input/event16"
[ 13.088] (**) Option "_source" "_driver/libinput"
[ 13.088] (II) libinput: ZSA Ergodox EZ Consumer Control: is a virtual subdevice
[ 13.088] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-2/3-2.2/3-2.2:1.1/0003:FEED:1307.0003/input/input16/event16"
[ 13.088] (II) XINPUT: Adding extended input device "ZSA Ergodox EZ Consumer Control" (type: KEYBOARD, id 14)
[ 13.088] (**) Option "xkb_model" "tm2030USB"
[ 13.088] (**) Option "xkb_layout" "us"
[ 13.088] (**) Option "xkb_variant" "altgr-intl"
An old Xorg log (~/.local/share/xorg/Xorg.1.log), from last year, showing that the 4K at 60fps resolution was present and working:
[ 33939.012] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 33939.013]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 33939.014] Build Operating System: Linux Arch Linux
[ 33939.014] Current Operating System: Linux esthar 5.6.14-arch1-1 #1 SMP PREEMPT Wed, 20 May 2020 20:43:19 +0000 x86_64
[ 33939.014] Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux.img rw root=PARTLABEL=Arch zswap.enabled=1 zswap.zpool=z3fold pci=noaer
[ 33939.014] Build Date: 05 May 2020 05:08:17AM
[ 33939.014]
[ 33939.015] Current version of pixman: 0.40.0
[ 33939.015] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 33939.015] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 33939.016] (==) Log file: "/home/dkrm/.local/share/xorg/Xorg.1.log", Time: Tue May 26 18:13:37 2020
[ 33939.016] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 33939.016] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 33939.016] (==) No Layout section. Using the first Screen section.
[ 33939.016] (==) No screen section available. Using defaults.
[ 33939.016] (**) |-->Screen "Default Screen Section" (0)
[ 33939.016] (**) | |-->Monitor "<default monitor>"
[ 33939.016] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 33939.016] (==) Automatically adding devices
[ 33939.016] (==) Automatically enabling devices
[ 33939.016] (==) Automatically adding GPU devices
[ 33939.016] (==) Automatically binding GPU devices
[ 33939.016] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 33939.016] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 33939.016] Entry deleted from font path.
[ 33939.016] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 33939.016] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 33939.016] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 33939.016] (II) Module ABI versions:
[ 33939.016] X.Org ANSI C Emulation: 0.4
[ 33939.016] X.Org Video Driver: 24.1
[ 33939.016] X.Org XInput driver : 24.1
[ 33939.016] X.Org Server Extension : 10.0
[ 33939.017] (++) using VT number 2
[ 33939.018] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[ 33939.019] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 33939.019] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 33939.024] (--) PCI:*(9@0:0:0) 1002:6939:1458:22bb rev 241, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfcf00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[ 33939.024] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 33939.024] (II) LoadModule: "glx"
[ 33939.024] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 33939.025] (II) Module glx: vendor="X.Org Foundation"
[ 33939.025] compiled for 1.20.8, module version = 1.0.0
[ 33939.025] ABI class: X.Org Server Extension, version 10.0
[ 33939.025] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 33939.025] loading driver: amdgpu
[ 33939.025] (==) Matched amdgpu as autoconfigured driver 0
[ 33939.025] (==) Matched ati as autoconfigured driver 1
[ 33939.025] (==) Matched modesetting as autoconfigured driver 2
[ 33939.025] (==) Matched fbdev as autoconfigured driver 3
[ 33939.025] (==) Matched vesa as autoconfigured driver 4
[ 33939.025] (==) Assigned the driver to the xf86ConfigLayout
[ 33939.025] (II) LoadModule: "amdgpu"
[ 33939.025] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 33939.026] (II) Module amdgpu: vendor="X.Org Foundation"
[ 33939.026] compiled for 1.20.8, module version = 19.1.0
[ 33939.026] Module class: X.Org Video Driver
[ 33939.026] ABI class: X.Org Video Driver, version 24.1
[ 33939.026] (II) LoadModule: "ati"
[ 33939.026] (WW) Warning, couldn't open module ati
[ 33939.026] (EE) Failed to load module "ati" (module does not exist, 0)
[ 33939.026] (II) LoadModule: "modesetting"
[ 33939.026] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 33939.026] (II) Module modesetting: vendor="X.Org Foundation"
[ 33939.026] compiled for 1.20.8, module version = 1.20.8
[ 33939.026] Module class: X.Org Video Driver
[ 33939.026] ABI class: X.Org Video Driver, version 24.1
[ 33939.026] (II) LoadModule: "fbdev"
[ 33939.026] (WW) Warning, couldn't open module fbdev
[ 33939.026] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 33939.026] (II) LoadModule: "vesa"
[ 33939.026] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 33939.026] (II) Module vesa: vendor="X.Org Foundation"
[ 33939.026] compiled for 1.20.8, module version = 2.4.0
[ 33939.026] Module class: X.Org Video Driver
[ 33939.026] ABI class: X.Org Video Driver, version 24.1
[ 33939.026] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 33939.026] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 33939.026] (II) VESA: driver for VESA chipsets: vesa
[ 33939.027] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 33939.027] (WW) Falling back to old probe method for modesetting
[ 33939.027] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 33939.027] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 33939.027] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 33939.027] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 33939.027] (==) AMDGPU(0): Default visual is TrueColor
[ 33939.027] (==) AMDGPU(0): RGB weight 888
[ 33939.027] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 33939.027] (--) AMDGPU(0): Chipset: "AMD Radeon (TM) R9 380 Series" (ChipID = 0x6939)
[ 33939.027] (II) Loading sub module "fb"
[ 33939.027] (II) LoadModule: "fb"
[ 33939.027] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 33939.027] (II) Module fb: vendor="X.Org Foundation"
[ 33939.027] compiled for 1.20.8, module version = 1.0.0
[ 33939.027] ABI class: X.Org ANSI C Emulation, version 0.4
[ 33939.027] (II) Loading sub module "dri2"
[ 33939.027] (II) LoadModule: "dri2"
[ 33939.027] (II) Module "dri2" already built-in
[ 33939.071] (II) Loading sub module "glamoregl"
[ 33939.071] (II) LoadModule: "glamoregl"
[ 33939.071] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 33939.075] (II) Module glamoregl: vendor="X.Org Foundation"
[ 33939.075] compiled for 1.20.8, module version = 1.0.1
[ 33939.075] ABI class: X.Org ANSI C Emulation, version 0.4
[ 33939.087] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon (TM) R9 380 Series (TONGA, DRM 3.36.0, 5.6.14-arch1-1, LLVM 10.0.0)
[ 33939.087] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 33939.087] (==) AMDGPU(0): TearFree property default: auto
[ 33939.087] (==) AMDGPU(0): VariableRefresh: disabled
[ 33939.087] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 33939.088] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 33939.088] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 33939.088] (II) AMDGPU(0): Output DVI-D-0 has no monitor section
[ 33939.088] (II) AMDGPU(0): Output DVI-D-1 has no monitor section
[ 33939.106] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 33939.106] (II) AMDGPU(0): Manufacturer: ACR Model: 690 Serial#: 2233483466
[ 33939.106] (II) AMDGPU(0): Year: 2018 Week: 52
[ 33939.106] (II) AMDGPU(0): EDID Version: 1.4
[ 33939.106] (II) AMDGPU(0): Digital Display Input
[ 33939.106] (II) AMDGPU(0): 10 bits per channel
[ 33939.106] (II) AMDGPU(0): Digital interface is DisplayPort
[ 33939.106] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 33939.106] (II) AMDGPU(0): Gamma: 2.20
[ 33939.106] (II) AMDGPU(0): DPMS capabilities: Off
[ 33939.106] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 33939.106] (II) AMDGPU(0): First detailed timing is preferred mode
[ 33939.106] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 33939.106] (II) AMDGPU(0): Display is continuous-frequency
[ 33939.106] (II) AMDGPU(0): redX: 0.655 redY: 0.331 greenX: 0.294 greenY: 0.619
[ 33939.106] (II) AMDGPU(0): blueX: 0.147 blueY: 0.052 whiteX: 0.313 whiteY: 0.329
[ 33939.106] (II) AMDGPU(0): Supported established timings:
[ 33939.106] (II) AMDGPU(0): 640x480@60Hz
[ 33939.106] (II) AMDGPU(0): 800x600@56Hz
[ 33939.106] (II) AMDGPU(0): 800x600@60Hz
[ 33939.106] (II) AMDGPU(0): 1024x768@60Hz
[ 33939.106] (II) AMDGPU(0): Manufacturer's mask: 0
[ 33939.106] (II) AMDGPU(0): Supported standard timings:
[ 33939.106] (II) AMDGPU(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 33939.106] (II) AMDGPU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 33939.106] (II) AMDGPU(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 33939.106] (II) AMDGPU(0): #3: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 33939.106] (II) AMDGPU(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 33939.106] (II) AMDGPU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 33939.106] (II) AMDGPU(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 33939.106] (II) AMDGPU(0): Supported detailed timing:
[ 33939.106] (II) AMDGPU(0): clock: 533.2 MHz Image Size: 596 x 335 mm
[ 33939.106] (II) AMDGPU(0): h_active: 3840 h_sync: 3888 h_sync_end 3920 h_blank_end 4000 h_border: 0
[ 33939.106] (II) AMDGPU(0): v_active: 2160 v_sync: 2163 v_sync_end 2168 v_blanking: 2222 v_border: 0
[ 33939.106] (II) AMDGPU(0): Supported detailed timing:
[ 33939.106] (II) AMDGPU(0): clock: 241.5 MHz Image Size: 596 x 335 mm
[ 33939.106] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 33939.106] (II) AMDGPU(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
[ 33939.106] (II) AMDGPU(0): Ranges: V min: 40 V max: 60 Hz, H min: 160 H max: 160 kHz, PixClock max 605 MHz
[ 33939.106] (II) AMDGPU(0): Monitor name: Acer VG270K
[ 33939.106] (II) AMDGPU(0): Supported detailed timing:
[ 33939.106] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 596 x 335 mm
[ 33939.106] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 33939.106] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 33939.106] (II) AMDGPU(0): Supported detailed timing:
[ 33939.106] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 596 x 335 mm
[ 33939.106] (II) AMDGPU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 33939.106] (II) AMDGPU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 33939.106] (II) AMDGPU(0): Supported detailed timing:
[ 33939.106] (II) AMDGPU(0): clock: 27.0 MHz Image Size: 596 x 335 mm
[ 33939.106] (II) AMDGPU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 33939.106] (II) AMDGPU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 33939.106] (II) AMDGPU(0): Number of EDID sections to follow: 1
[ 33939.106] (II) AMDGPU(0): EDID (in hex):
[ 33939.106] (II) AMDGPU(0): 00ffffffffffff0004729006ca402085
[ 33939.106] (II) AMDGPU(0): 341c0104b53c22783bf6d5a7544b9e25
[ 33939.106] (II) AMDGPU(0): 0d50542308008140818081c081009500
[ 33939.106] (II) AMDGPU(0): b300d1c001014dd000a0f0703e803020
[ 33939.106] (II) AMDGPU(0): 3500544f2100001a565e00a0a0a02950
[ 33939.106] (II) AMDGPU(0): 30203500544f2100001e000000fd0028
[ 33939.106] (II) AMDGPU(0): 3ca0a03c010a202020202020000000fc
[ 33939.106] (II) AMDGPU(0): 00416365722056473237304b0a200184
[ 33939.106] (II) AMDGPU(0): 02032bf150010304121305141f900702
[ 33939.106] (II) AMDGPU(0): 5d5e5f606123090707830100006d030c
[ 33939.106] (II) AMDGPU(0): 0010003878200060010203023a801871
[ 33939.106] (II) AMDGPU(0): 382d40582c4500544f2100001e011d00
[ 33939.106] (II) AMDGPU(0): 7251d01e206e285500544f2100001e8c
[ 33939.106] (II) AMDGPU(0): 0ad08a20e02d10103e9600544f210000
[ 33939.106] (II) AMDGPU(0): 18000000000000000000000000000000
[ 33939.106] (II) AMDGPU(0): 000000000000000000000000000000f8
[ 33939.107] (--) AMDGPU(0): HDMI max TMDS frequency 600000KHz
[ 33939.107] (II) AMDGPU(0): Printing probed modes for output DisplayPort-0
[ 33939.107] (II) AMDGPU(0): Modeline "3840x2160"x60.0 533.25 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[ 33939.107] (II) AMDGPU(0): Modeline "3840x2160"x60.0 594.00 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (135.0 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "3840x2160"x50.0 594.00 3840 4896 4984 5280 2160 2168 2178 2250 +hsync +vsync (112.5 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "3840x2160"x59.9 593.41 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (134.9 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "3840x2160"x30.0 297.00 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "3840x2160"x25.0 297.00 3840 4896 4984 5280 2160 2168 2178 2250 +hsync +vsync (56.2 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "3840x2160"x24.0 297.00 3840 5116 5204 5500 2160 2168 2178 2250 +hsync +vsync (54.0 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "3840x2160"x30.0 296.70 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "3840x2160"x24.0 296.70 3840 5116 5204 5500 2160 2168 2178 2250 +hsync +vsync (53.9 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync +vsync (88.8 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1920x1200"x60.0 533.25 1920 3888 3920 4000 1200 2163 2168 2222 +hsync -vsync (133.3 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1600x1200"x60.0 533.25 1600 3888 3920 4000 1200 2163 2168 2222 +hsync -vsync (133.3 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 33939.107] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 33939.107] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 33939.107] (II) AMDGPU(0): EDID for output DVI-D-0
[ 33939.107] (II) AMDGPU(0): EDID for output DVI-D-1
[ 33939.107] (II) AMDGPU(0): Output DisplayPort-0 connected
[ 33939.107] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 33939.107] (II) AMDGPU(0): Output DVI-D-0 disconnected
[ 33939.107] (II) AMDGPU(0): Output DVI-D-1 disconnected
[ 33939.107] (II) AMDGPU(0): Using exact sizes for initial modes
[ 33939.107] (II) AMDGPU(0): Output DisplayPort-0 using initial mode 3840x2160 +0+0
[ 33939.107] (II) AMDGPU(0): mem size init: gart size :ff978000 vram size: s:fd71f000 visible:db2f000
[ 33939.107] (==) AMDGPU(0): DPI set to (96, 96)
[ 33939.107] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 33939.107] (II) Loading sub module "ramdac"
[ 33939.107] (II) LoadModule: "ramdac"
[ 33939.107] (II) Module "ramdac" already built-in
[ 33939.107] (II) UnloadModule: "modesetting"
[ 33939.107] (II) Unloading modesetting
[ 33939.107] (II) UnloadModule: "vesa"
[ 33939.107] (II) Unloading vesa
[ 33939.107] (II) AMDGPU(0): [DRI2] Setup complete
[ 33939.107] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 33939.107] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 33939.107] (II) AMDGPU(0): Front buffer pitch: 15360 bytes
[ 33939.107] (II) AMDGPU(0): SYNC extension fences enabled
[ 33939.107] (II) AMDGPU(0): Present extension enabled
[ 33939.108] (==) AMDGPU(0): DRI3 enabled
[ 33939.108] (==) AMDGPU(0): Backing store enabled
[ 33939.108] (II) AMDGPU(0): Direct rendering enabled
[ 33939.115] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 33939.115] (II) AMDGPU(0): Acceleration enabled
[ 33939.115] (==) AMDGPU(0): DPMS enabled
[ 33939.115] (==) AMDGPU(0): Silken mouse disabled
[ 33939.115] (II) AMDGPU(0): Set up textured video (glamor)
[ 33939.123] (II) Initializing extension Generic Event Extension
[ 33939.123] (II) Initializing extension SHAPE
[ 33939.123] (II) Initializing extension MIT-SHM
[ 33939.123] (II) Initializing extension XInputExtension
[ 33939.123] (II) Initializing extension XTEST
[ 33939.123] (II) Initializing extension BIG-REQUESTS
[ 33939.123] (II) Initializing extension SYNC
[ 33939.123] (II) Initializing extension XKEYBOARD
[ 33939.123] (II) Initializing extension XC-MISC
[ 33939.123] (II) Initializing extension SECURITY
[ 33939.123] (II) Initializing extension XFIXES
[ 33939.123] (II) Initializing extension RENDER
[ 33939.123] (II) Initializing extension RANDR
[ 33939.123] (II) Initializing extension COMPOSITE
[ 33939.123] (II) Initializing extension DAMAGE
[ 33939.123] (II) Initializing extension MIT-SCREEN-SAVER
[ 33939.123] (II) Initializing extension DOUBLE-BUFFER
[ 33939.123] (II) Initializing extension RECORD
[ 33939.123] (II) Initializing extension DPMS
[ 33939.123] (II) Initializing extension Present
[ 33939.123] (II) Initializing extension DRI3
[ 33939.123] (II) Initializing extension X-Resource
[ 33939.123] (II) Initializing extension XVideo
[ 33939.123] (II) Initializing extension XVideo-MotionCompensation
[ 33939.123] (II) Initializing extension GLX
[ 33939.129] (II) AIGLX: Loaded and initialized radeonsi
[ 33939.129] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 33939.129] (II) Initializing extension XFree86-VidModeExtension
[ 33939.129] (II) Initializing extension XFree86-DGA
[ 33939.129] (II) Initializing extension XFree86-DRI
[ 33939.129] (II) Initializing extension DRI2
[ 33939.130] (II) AMDGPU(0): Setting screen physical size to 1016 x 571
[ 33939.216] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 33939.216] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 33939.216] (**) Power Button: Applying InputClass "system-keyboard"
[ 33939.216] (II) LoadModule: "libinput"
[ 33939.216] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 33939.218] (II) Module libinput: vendor="X.Org Foundation"
[ 33939.218] compiled for 1.20.8, module version = 0.30.0
[ 33939.218] Module class: X.Org XInput Driver
[ 33939.218] ABI class: X.Org XInput driver, version 24.1
[ 33939.218] (II) Using input driver 'libinput' for 'Power Button'
[ 33939.219] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 19 paused 0
[ 33939.219] (**) Power Button: always reports core events
[ 33939.219] (**) Option "Device" "/dev/input/event1"
[ 33939.219] (**) Option "_source" "server/udev"
[ 33939.220] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 33939.221] (II) event1 - Power Button: device is a keyboard
[ 33939.221] (II) event1 - Power Button: device removed
[ 33939.221] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 33939.221] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 33939.221] (**) Option "xkb_model" "tm2030USB"
[ 33939.221] (**) Option "xkb_layout" "us"
[ 33939.221] (**) Option "xkb_variant" "altgr-intl"
[ 33939.240] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 33939.240] (II) event1 - Power Button: device is a keyboard
[ 33939.240] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 33939.240] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 33939.240] (**) Power Button: Applying InputClass "system-keyboard"
[ 33939.240] (II) Using input driver 'libinput' for 'Power Button'
[ 33939.241] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 22 paused 0
[ 33939.241] (**) Power Button: always reports core events
[ 33939.241] (**) Option "Device" "/dev/input/event0"
[ 33939.241] (**) Option "_source" "server/udev"
[ 33939.242] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 33939.242] (II) event0 - Power Button: device is a keyboard
[ 33939.242] (II) event0 - Power Button: device removed
[ 33939.242] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 33939.242] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 33939.242] (**) Option "xkb_model" "tm2030USB"
[ 33939.242] (**) Option "xkb_layout" "us"
[ 33939.242] (**) Option "xkb_variant" "altgr-intl"
[ 33939.243] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 33939.243] (II) event0 - Power Button: device is a keyboard
[ 33939.244] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event18)
[ 33939.244] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "libinput pointer catchall"
[ 33939.244] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Wireless Mouse'
[ 33939.244] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 23 paused 0
[ 33939.244] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events
[ 33939.244] (**) Option "Device" "/dev/input/event18"
[ 33939.244] (**) Option "_source" "server/udev"
[ 33939.246] (II) event18 - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[ 33939.246] (II) event18 - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[ 33939.246] (II) event18 - MOSART Semi. 2.4G Wireless Mouse: device removed
[ 33939.246] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-10/1-10:1.0/0003:062A:4106.0004/input/input18/event18"
[ 33939.247] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 8)
[ 33939.247] (**) Option "AccelerationScheme" "none"
[ 33939.247] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) selected scheme none/0
[ 33939.247] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[ 33939.247] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[ 33939.248] (II) event18 - MOSART Semi. 2.4G Wireless Mouse: is tagged by udev as: Mouse
[ 33939.248] (II) event18 - MOSART Semi. 2.4G Wireless Mouse: device is a pointer
[ 33939.249] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse1)
[ 33939.249] (II) No input driver specified, ignoring this device.
[ 33939.249] (II) This device may have been added with another device file.
[ 33939.250] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event19)
[ 33939.250] (II) No input driver specified, ignoring this device.
[ 33939.250] (II) This device may have been added with another device file.
[ 33939.251] (II) config/udev: Adding input device ZSA Ergodox EZ (/dev/input/event13)
[ 33939.251] (**) ZSA Ergodox EZ: Applying InputClass "libinput keyboard catchall"
[ 33939.251] (**) ZSA Ergodox EZ: Applying InputClass "system-keyboard"
[ 33939.251] (II) Using input driver 'libinput' for 'ZSA Ergodox EZ'
[ 33939.251] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 24 paused 0
[ 33939.251] (**) ZSA Ergodox EZ: always reports core events
[ 33939.251] (**) Option "Device" "/dev/input/event13"
[ 33939.251] (**) Option "_source" "server/udev"
[ 33939.253] (II) event13 - ZSA Ergodox EZ: is tagged by udev as: Keyboard
[ 33939.253] (II) event13 - ZSA Ergodox EZ: device is a keyboard
[ 33939.253] (II) event13 - ZSA Ergodox EZ: device removed
[ 33939.253] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-7/1-7:1.0/0003:FEED:1307.0001/input/input13/event13"
[ 33939.253] (II) XINPUT: Adding extended input device "ZSA Ergodox EZ" (type: KEYBOARD, id 9)
[ 33939.253] (**) Option "xkb_model" "tm2030USB"
[ 33939.253] (**) Option "xkb_layout" "us"
[ 33939.253] (**) Option "xkb_variant" "altgr-intl"
[ 33939.255] (II) event13 - ZSA Ergodox EZ: is tagged by udev as: Keyboard
[ 33939.255] (II) event13 - ZSA Ergodox EZ: device is a keyboard
[ 33939.256] (II) config/udev: Adding input device ZSA Ergodox EZ Mouse (/dev/input/event14)
[ 33939.256] (**) ZSA Ergodox EZ Mouse: Applying InputClass "libinput pointer catchall"
[ 33939.256] (II) Using input driver 'libinput' for 'ZSA Ergodox EZ Mouse'
[ 33939.257] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 25 paused 0
[ 33939.257] (**) ZSA Ergodox EZ Mouse: always reports core events
[ 33939.257] (**) Option "Device" "/dev/input/event14"
[ 33939.257] (**) Option "_source" "server/udev"
[ 33939.258] (II) event14 - ZSA Ergodox EZ Mouse: is tagged by udev as: Mouse
[ 33939.259] (II) event14 - ZSA Ergodox EZ Mouse: device is a pointer
[ 33939.259] (II) event14 - ZSA Ergodox EZ Mouse: device removed
[ 33939.259] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-7/1-7:1.1/0003:FEED:1307.0002/input/input14/event14"
[ 33939.259] (II) XINPUT: Adding extended input device "ZSA Ergodox EZ Mouse" (type: MOUSE, id 10)
[ 33939.259] (**) Option "AccelerationScheme" "none"
[ 33939.259] (**) ZSA Ergodox EZ Mouse: (accel) selected scheme none/0
[ 33939.259] (**) ZSA Ergodox EZ Mouse: (accel) acceleration factor: 2.000
[ 33939.259] (**) ZSA Ergodox EZ Mouse: (accel) acceleration threshold: 4
[ 33939.261] (II) event14 - ZSA Ergodox EZ Mouse: is tagged by udev as: Mouse
[ 33939.261] (II) event14 - ZSA Ergodox EZ Mouse: device is a pointer
[ 33939.262] (II) config/udev: Adding input device ZSA Ergodox EZ Mouse (/dev/input/mouse0)
[ 33939.262] (II) No input driver specified, ignoring this device.
[ 33939.262] (II) This device may have been added with another device file.
[ 33939.262] (II) config/udev: Adding input device ZSA Ergodox EZ System Control (/dev/input/event15)
[ 33939.262] (**) ZSA Ergodox EZ System Control: Applying InputClass "libinput keyboard catchall"
[ 33939.262] (**) ZSA Ergodox EZ System Control: Applying InputClass "system-keyboard"
[ 33939.262] (II) Using input driver 'libinput' for 'ZSA Ergodox EZ System Control'
[ 33939.263] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 26 paused 0
[ 33939.263] (**) ZSA Ergodox EZ System Control: always reports core events
[ 33939.263] (**) Option "Device" "/dev/input/event15"
[ 33939.263] (**) Option "_source" "server/udev"
[ 33939.265] (II) event15 - ZSA Ergodox EZ System Control: is tagged by udev as: Keyboard
[ 33939.265] (II) event15 - ZSA Ergodox EZ System Control: device is a keyboard
[ 33939.265] (II) event15 - ZSA Ergodox EZ System Control: device removed
[ 33939.265] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-7/1-7:1.1/0003:FEED:1307.0002/input/input15/event15"
[ 33939.265] (II) XINPUT: Adding extended input device "ZSA Ergodox EZ System Control" (type: KEYBOARD, id 11)
[ 33939.265] (**) Option "xkb_model" "tm2030USB"
[ 33939.265] (**) Option "xkb_layout" "us"
[ 33939.265] (**) Option "xkb_variant" "altgr-intl"
[ 33939.267] (II) event15 - ZSA Ergodox EZ System Control: is tagged by udev as: Keyboard
[ 33939.267] (II) event15 - ZSA Ergodox EZ System Control: device is a keyboard
[ 33939.268] (II) config/udev: Adding input device ZSA Ergodox EZ Consumer Control (/dev/input/event16)
[ 33939.268] (**) ZSA Ergodox EZ Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 33939.268] (**) ZSA Ergodox EZ Consumer Control: Applying InputClass "system-keyboard"
[ 33939.268] (II) Using input driver 'libinput' for 'ZSA Ergodox EZ Consumer Control'
[ 33939.269] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 27 paused 0
[ 33939.269] (**) ZSA Ergodox EZ Consumer Control: always reports core events
[ 33939.269] (**) Option "Device" "/dev/input/event16"
[ 33939.269] (**) Option "_source" "server/udev"
[ 33939.271] (II) event16 - ZSA Ergodox EZ Consumer Control: is tagged by udev as: Keyboard
[ 33939.271] (II) event16 - ZSA Ergodox EZ Consumer Control: device is a keyboard
[ 33939.271] (II) event16 - ZSA Ergodox EZ Consumer Control: device removed
[ 33939.271] (II) libinput: ZSA Ergodox EZ Consumer Control: needs a virtual subdevice
[ 33939.271] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-7/1-7:1.1/0003:FEED:1307.0002/input/input16/event16"
[ 33939.271] (II) XINPUT: Adding extended input device "ZSA Ergodox EZ Consumer Control" (type: MOUSE, id 12)
[ 33939.271] (**) Option "AccelerationScheme" "none"
[ 33939.271] (**) ZSA Ergodox EZ Consumer Control: (accel) selected scheme none/0
[ 33939.271] (**) ZSA Ergodox EZ Consumer Control: (accel) acceleration factor: 2.000
[ 33939.271] (**) ZSA Ergodox EZ Consumer Control: (accel) acceleration threshold: 4
[ 33939.273] (II) event16 - ZSA Ergodox EZ Consumer Control: is tagged by udev as: Keyboard
[ 33939.273] (II) event16 - ZSA Ergodox EZ Consumer Control: device is a keyboard
[ 33939.274] (II) config/udev: Adding input device ZSA Ergodox EZ Keyboard (/dev/input/event17)
[ 33939.274] (**) ZSA Ergodox EZ Keyboard: Applying InputClass "libinput keyboard catchall"
[ 33939.274] (**) ZSA Ergodox EZ Keyboard: Applying InputClass "system-keyboard"
[ 33939.274] (II) Using input driver 'libinput' for 'ZSA Ergodox EZ Keyboard'
[ 33939.274] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 28 paused 0
[ 33939.274] (**) ZSA Ergodox EZ Keyboard: always reports core events
[ 33939.274] (**) Option "Device" "/dev/input/event17"
[ 33939.274] (**) Option "_source" "server/udev"
[ 33939.276] (II) event17 - ZSA Ergodox EZ Keyboard: is tagged by udev as: Keyboard
[ 33939.276] (II) event17 - ZSA Ergodox EZ Keyboard: device is a keyboard
[ 33939.276] (II) event17 - ZSA Ergodox EZ Keyboard: device removed
[ 33939.276] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-7/1-7:1.1/0003:FEED:1307.0002/input/input17/event17"
[ 33939.276] (II) XINPUT: Adding extended input device "ZSA Ergodox EZ Keyboard" (type: KEYBOARD, id 13)
[ 33939.276] (**) Option "xkb_model" "tm2030USB"
[ 33939.276] (**) Option "xkb_layout" "us"
[ 33939.276] (**) Option "xkb_variant" "altgr-intl"
[ 33939.278] (II) event17 - ZSA Ergodox EZ Keyboard: is tagged by udev as: Keyboard
[ 33939.278] (II) event17 - ZSA Ergodox EZ Keyboard: device is a keyboard
[ 33939.279] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event2)
[ 33939.279] (II) No input driver specified, ignoring this device.
[ 33939.279] (II) This device may have been added with another device file.
[ 33939.279] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event3)
[ 33939.279] (II) No input driver specified, ignoring this device.
[ 33939.279] (II) This device may have been added with another device file.
[ 33939.280] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event4)
[ 33939.280] (II) No input driver specified, ignoring this device.
[ 33939.280] (II) This device may have been added with another device file.
[ 33939.280] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event5)
[ 33939.280] (II) No input driver specified, ignoring this device.
[ 33939.280] (II) This device may have been added with another device file.
[ 33939.281] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event6)
[ 33939.281] (II) No input driver specified, ignoring this device.
[ 33939.281] (II) This device may have been added with another device file.
[ 33939.281] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event7)
[ 33939.281] (II) No input driver specified, ignoring this device.
[ 33939.281] (II) This device may have been added with another device file.
[ 33939.281] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event10)
[ 33939.281] (II) No input driver specified, ignoring this device.
[ 33939.281] (II) This device may have been added with another device file.
[ 33939.282] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event11)
[ 33939.282] (II) No input driver specified, ignoring this device.
[ 33939.282] (II) This device may have been added with another device file.
[ 33939.282] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event12)
[ 33939.282] (II) No input driver specified, ignoring this device.
[ 33939.282] (II) This device may have been added with another device file.
[ 33939.282] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event8)
[ 33939.282] (II) No input driver specified, ignoring this device.
[ 33939.282] (II) This device may have been added with another device file.
[ 33939.283] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event9)
[ 33939.283] (II) No input driver specified, ignoring this device.
[ 33939.283] (II) This device may have been added with another device file.
[ 33939.283] (II) config/udev: Adding input device WH-1000XM3 (AVRCP) (/dev/input/event20)
[ 33939.283] (**) WH-1000XM3 (AVRCP): Applying InputClass "libinput keyboard catchall"
[ 33939.283] (**) WH-1000XM3 (AVRCP): Applying InputClass "system-keyboard"
[ 33939.283] (II) Using input driver 'libinput' for 'WH-1000XM3 (AVRCP)'
[ 33939.284] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 29 paused 0
[ 33939.284] (**) WH-1000XM3 (AVRCP): always reports core events
[ 33939.284] (**) Option "Device" "/dev/input/event20"
[ 33939.284] (**) Option "_source" "server/udev"
[ 33939.284] (II) event20 - WH-1000XM3 (AVRCP): is tagged by udev as: Keyboard
[ 33939.284] (II) event20 - WH-1000XM3 (AVRCP): device is a keyboard
[ 33939.284] (II) event20 - WH-1000XM3 (AVRCP): device removed
[ 33939.284] (**) Option "config_info" "udev:/sys/devices/virtual/input/input20/event20"
[ 33939.284] (II) XINPUT: Adding extended input device "WH-1000XM3 (AVRCP)" (type: KEYBOARD, id 14)
[ 33939.284] (**) Option "xkb_model" "tm2030USB"
[ 33939.284] (**) Option "xkb_layout" "us"
[ 33939.285] (**) Option "xkb_variant" "altgr-intl"
[ 33939.285] (II) event20 - WH-1000XM3 (AVRCP): is tagged by udev as: Keyboard
[ 33939.285] (II) event20 - WH-1000XM3 (AVRCP): device is a keyboard
[ 33939.288] (**) ZSA Ergodox EZ Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 33939.288] (**) ZSA Ergodox EZ Consumer Control: Applying InputClass "system-keyboard"
[ 33939.288] (II) Using input driver 'libinput' for 'ZSA Ergodox EZ Consumer Control'
[ 33939.288] (II) systemd-logind: returning pre-existing fd for /dev/input/event16 13:80
[ 33939.288] (**) ZSA Ergodox EZ Consumer Control: always reports core events
[ 33939.288] (**) Option "Device" "/dev/input/event16"
[ 33939.288] (**) Option "_source" "_driver/libinput"
[ 33939.288] (II) libinput: ZSA Ergodox EZ Consumer Control: is a virtual subdevice
[ 33939.288] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-7/1-7:1.1/0003:FEED:1307.0002/input/input16/event16"
[ 33939.288] (II) XINPUT: Adding extended input device "ZSA Ergodox EZ Consumer Control" (type: KEYBOARD, id 15)
[ 33939.288] (**) Option "xkb_model" "tm2030USB"
[ 33939.288] (**) Option "xkb_layout" "us"
[ 33939.288] (**) Option "xkb_variant" "altgr-intl"
I tried to force the resolution at 4K with 60fps using this technique, but it didn't work.
I also tried to revert the Linux kernel to a previous version, linux-lts-5.10.71, but it didn't work too.
I can't figure out what is the problem since it worked fine previously and now it just "magicaly" don't work
Last edited by dkrm (2021-10-15 14:53:33)
Offline
"it didn't work" isn't a useful error description.
How did it not work?
("it didn't worked" isn't english either ;-)
nb. that
Modeline "3840x2160"x60.0 533.25 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
implements reduced blanking.
The EDID block still lists those resolutions, you can feed
0x00 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0x00 0x04 0x72 0x90 0x06 0xCA 0x40 0x20 0x85 0x34 0x1C 0x01 0x04 0xB5 0x3C 0x22 0x78 0x3B 0xF6 0xD5 0xA7 0x54 0x4B 0x9E 0x25 0x0D 0x50 0x54 0x23 0x08 0x00 0x81 0x40 0x81 0x80 0x81 0xC0 0x81 0x00 0x95 0x00 0xB3 0x00 0xD1 0xC0 0x01 0x01 0x4D 0xD0 0x00 0xA0 0xF0 0x70 0x3E 0x80 0x30 0x20 0x35 0x00 0x54 0x4F 0x21 0x00 0x00 0x1A 0x56 0x5E 0x00 0xA0 0xA0 0xA0 0x29 0x50 0x30 0x20 0x35 0x00 0x54 0x4F 0x21 0x00 0x00 0x1E 0x00 0x00 0x00 0xFD 0x00 0x28 0x3C 0xA0 0xA0 0x3C 0x01 0x0A 0x20 0x20 0x20 0x20 0x20 0x20 0x00 0x00 0x00 0xFC 0x00 0x41 0x63 0x65 0x72 0x20 0x56 0x47 0x32 0x37 0x30 0x4B 0x0A 0x20 0x01 0x84 0x02 0x03 0x2B 0xF1 0x50 0x01 0x03 0x04 0x12 0x13 0x05 0x14 0x1F 0x90 0x07 0x02 0x5D 0x5E 0x5F 0x60 0x61 0x23 0x09 0x07 0x07 0x83 0x01 0x00 0x00 0x6D 0x03 0x0C 0x00 0x10 0x00 0x38 0x78 0x20 0x00 0x60 0x01 0x02 0x03 0x02 0x3A 0x80 0x18 0x71 0x38 0x2D 0x40 0x58 0x2C 0x45 0x00 0x54 0x4F 0x21 0x00 0x00 0x1E 0x01 0x1D 0x00 0x72 0x51 0xD0 0x1E 0x20 0x6E 0x28 0x55 0x00 0x54 0x4F 0x21 0x00 0x00 0x1E 0x8C 0x0A 0xD0 0x8A 0x20 0xE0 0x2D 0x10 0x10 0x3E 0x96 0x00 0x54 0x4F 0x21 0x00 0x00 0x18 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xF8
into http://www.edidreader.com/
You could try to remove xf86-video-amdgpu and use the modesetting driver to see whether it's restricted by the DDX or the kernel module…
Online
Thank you for your response @seth.
I managed to fix the issue by unplugging/repluging the DisplayPort cable... I should have done that sooner
Offline