You are not logged in.
- Topics: Active | Unanswered
#1 2021-10-18 14:55:08
- thommen
- Member
- From: Poland
- Registered: 2017-12-30
- Posts: 239
[RESOLVED] Black monitors when Xinerama is turned on
I am going from Nouveau to the closed Nvidia driver. I configured xorg.conf with "nvidia-settings".
I have mistakes. This is my xorg.log
[ 10.916] (--) Log file renamed from "/var/log/Xorg.pid-564.log" to "/var/log/Xorg.0.log"
[ 10.918]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[ 10.918] Build Operating System: Linux Archlinux
[ 10.918] Current Operating System: Linux los 5.14.12-arch1-1 #1 SMP PREEMPT Wed, 13 Oct 2021 16:58:16 +0000 x86_64
[ 10.918] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c25b43bb-bc44-4742-9b28-40d0e0035888 rw loglevel=3 quiet
[ 10.918] Build Date: 04 August 2021 08:13:54AM
[ 10.918]
[ 10.918] Current version of pixman: 0.40.0
[ 10.918] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.918] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.918] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 18 16:39:44 2021
[ 10.921] (==) Using config file: "/etc/X11/xorg.conf"
[ 10.921] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 10.922] (==) ServerLayout "Layout0"
[ 10.922] (**) |-->Screen "Screen0" (0)
[ 10.922] (**) | |-->Monitor "Monitor0"
[ 10.922] (**) | |-->Device "Device0"
[ 10.922] (**) |-->Screen "Screen1" (1)
[ 10.922] (**) | |-->Monitor "Monitor1"
[ 10.923] (**) | |-->Device "Device1"
[ 10.923] (**) |-->Screen "Screen2" (2)
[ 10.923] (**) | |-->Monitor "Monitor2"
[ 10.923] (**) | |-->Device "Device2"
[ 10.923] (**) |-->Screen "Screen3" (3)
[ 10.923] (**) | |-->Monitor "Monitor3"
[ 10.923] (**) | |-->Device "Device3"
[ 10.923] (**) |-->Screen "Screen4" (4)
[ 10.923] (**) | |-->Monitor "Monitor4"
[ 10.923] (**) | |-->Device "Device4"
[ 10.923] (**) |-->Screen "Screen5" (5)
[ 10.923] (**) | |-->Monitor "Monitor5"
[ 10.923] (**) | |-->Device "Device5"
[ 10.923] (**) |-->Screen "Screen6" (6)
[ 10.923] (**) | |-->Monitor "Monitor6"
[ 10.923] (**) | |-->Device "Device6"
[ 10.923] (**) |-->Input Device "Keyboard0"
[ 10.923] (**) |-->Input Device "Mouse0"
[ 10.923] (**) Option "Xinerama" "1"
[ 10.923] (==) Automatically adding devices
[ 10.923] (==) Automatically enabling devices
[ 10.923] (==) Automatically adding GPU devices
[ 10.923] (==) Automatically binding GPU devices
[ 10.923] (**) Xinerama: enabled
[ 10.923] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 10.926] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 10.926] Entry deleted from font path.
[ 10.926] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 10.926] Entry deleted from font path.
[ 10.926] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[ 10.926] Entry deleted from font path.
[ 10.926] (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[ 10.927] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[ 10.927] Entry deleted from font path.
[ 10.927] (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[ 10.927] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF
[ 10.927] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.927] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 10.927] (WW) Disabling Keyboard0
[ 10.927] (WW) Disabling Mouse0
[ 10.927] (II) Module ABI versions:
[ 10.927] X.Org ANSI C Emulation: 0.4
[ 10.927] X.Org Video Driver: 24.1
[ 10.927] X.Org XInput driver : 24.1
[ 10.927] X.Org Server Extension : 10.0
[ 10.927] (++) using VT number 1
[ 10.927] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 10.927] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 10.928] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 10.928] (II) xfree86: Adding drm device (/dev/dri/card2)
[ 10.928] (II) xfree86: Adding drm device (/dev/dri/card3)
[ 10.931] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 10.931] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 10.931] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 10.931] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 10.935] (--) PCI: (3@0:0:0) 10de:107d:103c:094e rev 161, Mem @ 0xde000000/16777216, 0xc8000000/134217728, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 10.935] (--) PCI:*(4@0:0:0) 10de:107d:103c:094e rev 161, Mem @ 0xdc000000/16777216, 0xb8000000/134217728, 0xc0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/131072
[ 10.935] (--) PCI: (5@0:0:0) 10de:107d:103c:094e rev 161, Mem @ 0xda000000/16777216, 0xa8000000/134217728, 0xb0000000/33554432, I/O @ 0x0000c000/128, BIOS @ 0x????????/524288
[ 10.935] (--) PCI: (6@0:0:0) 10de:107d:103c:094e rev 161, Mem @ 0xd8000000/16777216, 0x98000000/134217728, 0xa0000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/524288
[ 10.935] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.935] (II) LoadModule: "glx"
[ 10.936] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 10.966] (II) Module glx: vendor="NVIDIA Corporation"
[ 10.966] compiled for 4.0.2, module version = 1.0.0
[ 10.966] Module class: X.Org Server Extension
[ 10.966] (II) NVIDIA GLX Module 390.144 Wed Jun 2 23:02:00 UTC 2021
[ 10.967] (II) LoadModule: "nvidia"
[ 10.968] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 10.971] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 10.971] compiled for 4.0.2, module version = 1.0.0
[ 10.971] Module class: X.Org Video Driver
[ 10.972] (II) NVIDIA dlloader X Driver 390.144 Wed Jun 2 23:05:01 UTC 2021
[ 10.972] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 10.973] (II) Loading sub module "fb"
[ 10.973] (II) LoadModule: "fb"
[ 10.973] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.973] (II) Module fb: vendor="X.Org Foundation"
[ 10.973] compiled for 1.20.13, module version = 1.0.0
[ 10.973] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.973] (II) Loading sub module "wfb"
[ 10.973] (II) LoadModule: "wfb"
[ 10.973] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 10.974] (II) Module wfb: vendor="X.Org Foundation"
[ 10.974] compiled for 1.20.13, module version = 1.0.0
[ 10.974] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.974] (II) Loading sub module "ramdac"
[ 10.974] (II) LoadModule: "ramdac"
[ 10.974] (II) Module "ramdac" already built-in
[ 10.975] (WW) NVIDIA: The Composite and Xinerama extensions are both enabled, which
[ 10.975] (WW) NVIDIA: is an unsupported configuration. The driver will continue
[ 10.975] (WW) NVIDIA: to load, but may behave strangely.
[ 10.975] (WW) NVIDIA: Xinerama is enabled, so RandR has likely been disabled by the
[ 10.975] (WW) NVIDIA: X server.
[ 11.024] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 11.024] (==) NVIDIA(0): RGB weight 888
[ 11.024] (==) NVIDIA(0): Default visual is TrueColor
[ 11.024] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.024] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 11.024] (**) NVIDIA(0): Option "Stereo" "0"
[ 11.024] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-2"
[ 11.024] (**) NVIDIA(0): Option "SLI" "Off"
[ 11.024] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 11.024] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 11.024] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 11.024] (**) NVIDIA(0): Stereo disabled by request
[ 11.025] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 11.025] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 11.025] (**) NVIDIA(0): Option "MetaModes" "DP-2: nvidia-auto-select +0+0, DP-3: nvidia-auto-select +1920+0"
[ 11.025] (**) NVIDIA(0): Enabling 2D acceleration
[ 11.745] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:4:0:0
[ 11.745] (--) NVIDIA(0): DFP-0
[ 11.745] (--) NVIDIA(0): DFP-1
[ 11.745] (--) NVIDIA(0): DFP-2 (boot)
[ 11.746] (--) NVIDIA(0): DFP-3
[ 11.747] (II) NVIDIA(0): NVIDIA GPU NVS 310 (GF119) at PCI:4:0:0 (GPU-0)
[ 11.747] (--) NVIDIA(0): Memory: 524288 kBytes
[ 11.747] (--) NVIDIA(0): VideoBIOS: 75.19.57.00.06
[ 11.747] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 11.749] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 11.749] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 11.749] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 11.749] (--) NVIDIA(GPU-0):
[ 11.751] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 11.751] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 11.751] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 11.751] (--) NVIDIA(GPU-0):
[ 11.751] (--) NVIDIA(GPU-0): Idek Iiyama PL2493H (DFP-2): connected
[ 11.751] (--) NVIDIA(GPU-0): Idek Iiyama PL2493H (DFP-2): Internal DisplayPort
[ 11.751] (--) NVIDIA(GPU-0): Idek Iiyama PL2493H (DFP-2): 480.0 MHz maximum pixel clock
[ 11.751] (--) NVIDIA(GPU-0):
[ 11.752] (--) NVIDIA(GPU-0): Idek Iiyama PL2493H (DFP-3): connected
[ 11.752] (--) NVIDIA(GPU-0): Idek Iiyama PL2493H (DFP-3): Internal DisplayPort
[ 11.752] (--) NVIDIA(GPU-0): Idek Iiyama PL2493H (DFP-3): 480.0 MHz maximum pixel clock
[ 11.752] (--) NVIDIA(GPU-0):
[ 11.757] (II) NVIDIA(0): Validated MetaModes:
[ 11.757] (II) NVIDIA(0):
[ 11.757] (II) NVIDIA(0): "DP-2:nvidia-auto-select+0+0,DP-3:nvidia-auto-select+1920+0"
[ 11.757] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[ 11.761] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 11.761] (--) NVIDIA(0): option
[ 11.761] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[ 11.761] (==) NVIDIA(1): RGB weight 888
[ 11.761] (==) NVIDIA(1): Default visual is TrueColor
[ 11.761] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 11.761] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 11.761] (**) NVIDIA(1): Option "Stereo" "0"
[ 11.761] (**) NVIDIA(1): Option "nvidiaXineramaInfoOrder" "DFP-2"
[ 11.761] (**) NVIDIA(1): Option "SLI" "Off"
[ 11.761] (**) NVIDIA(1): Option "MultiGPU" "Off"
[ 11.761] (**) NVIDIA(1): Option "BaseMosaic" "off"
[ 11.761] (**) NVIDIA(1): Option "AllowEmptyInitialConfiguration"
[ 11.761] (**) NVIDIA(1): Stereo disabled by request
[ 11.761] (**) NVIDIA(1): NVIDIA SLI disabled.
[ 11.761] (**) NVIDIA(1): NVIDIA Multi-GPU disabled.
[ 11.761] (**) NVIDIA(1): Option "MetaModes" "DP-2: nvidia-auto-select +0+0 {AllowGSYNC=Off}; DP-2: 1920x1080_75 +0+0; DP-2: 1920x1080_75_0 +0+0; DP-2: 1920x1080_60_0 +0+0; DP-2: 1920x1080_50 +0+0; DP-2: 1680x1050 +0+0; DP-2: 1440x900 +0+0; DP-2: 1280x1024 +0+0; DP-2: 1280x1024_60 +0+0; DP-2: 1280x800 +0+0; DP-2: 1280x720 +0+0; DP-2: 1280x720_60_0 +0+0; DP-2: 1280x720_50 +0+0; DP-2: 1152x864 +0+0; DP-2: 1024x768 +0+0; DP-2: 1024x768_70 +0+0; DP-2: 1024x768_60 +0+0; DP-2: 800x600 +0+0; DP-2: 800x600_60 +0+0; DP-2: 800x600_56 +0+0; DP-2: 720x576 +0+0; DP-2: 720x480 +0+0; DP-2: 640x480 +0+0; DP-2: 640x480_60 +0+0; DP-2: 640x480_60_0 +0+0; DP-2: nvidia-auto-select +0+0 {viewportin=1366x768, viewportout=1920x1079+0+0}"
[ 11.761] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 11.761] (**) NVIDIA(2): Option "MetaModes" "DP-3: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
[ 11.761] (**) NVIDIA(1): Enabling 2D acceleration
[ 12.705] (--) NVIDIA(0): Valid display device(s) on GPU-1 at PCI:3:0:0
[ 12.705] (--) NVIDIA(0): DFP-0
[ 12.705] (--) NVIDIA(0): DFP-1
[ 12.705] (--) NVIDIA(0): DFP-2 (boot)
[ 12.705] (--) NVIDIA(0): DFP-3
[ 12.706] (II) NVIDIA(1): NVIDIA GPU NVS 310 (GF119) at PCI:3:0:0 (GPU-1)
[ 12.706] (--) NVIDIA(1): Memory: 524288 kBytes
[ 12.706] (--) NVIDIA(1): VideoBIOS: 75.19.57.00.06
[ 12.706] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 12.709] (--) NVIDIA(GPU-1): DFP-0: disconnected
[ 12.709] (--) NVIDIA(GPU-1): DFP-0: Internal TMDS
[ 12.709] (--) NVIDIA(GPU-1): DFP-0: 165.0 MHz maximum pixel clock
[ 12.709] (--) NVIDIA(GPU-1):
[ 12.711] (--) NVIDIA(GPU-1): DFP-1: disconnected
[ 12.711] (--) NVIDIA(GPU-1): DFP-1: Internal TMDS
[ 12.711] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[ 12.711] (--) NVIDIA(GPU-1):
[ 12.711] (--) NVIDIA(GPU-1): Idek Iiyama PL2493H (DFP-2): connected
[ 12.711] (--) NVIDIA(GPU-1): Idek Iiyama PL2493H (DFP-2): Internal DisplayPort
[ 12.711] (--) NVIDIA(GPU-1): Idek Iiyama PL2493H (DFP-2): 480.0 MHz maximum pixel clock
[ 12.711] (--) NVIDIA(GPU-1):
[ 12.711] (--) NVIDIA(GPU-1): Idek Iiyama PL2493H (DFP-3): connected
[ 12.711] (--) NVIDIA(GPU-1): Idek Iiyama PL2493H (DFP-3): Internal DisplayPort
[ 12.711] (--) NVIDIA(GPU-1): Idek Iiyama PL2493H (DFP-3): 480.0 MHz maximum pixel clock
[ 12.711] (--) NVIDIA(GPU-1):
[ 12.717] (II) NVIDIA(1): Validated MetaModes:
[ 12.717] (II) NVIDIA(1): "DP-2:nvidia-auto-select+0+0{AllowGSYNC=Off}"
[ 12.717] (II) NVIDIA(1): "DP-2:1920x1080_75+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1920x1080_75_0+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1920x1080_60_0+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1920x1080_50+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1680x1050+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1440x900+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1280x1024+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1280x1024_60+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1280x800+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1280x720+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1280x720_60_0+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1280x720_50+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1152x864+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1024x768+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1024x768_70+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:1024x768_60+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:800x600+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:800x600_60+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:800x600_56+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:720x576+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:720x480+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:640x480+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:640x480_60+0+0"
[ 12.717] (II) NVIDIA(1): "DP-2:640x480_60_0+0+0"
[ 12.717] (II) NVIDIA(1):
[ 12.717] (II) NVIDIA(1): "DP-2:nvidia-auto-select+0+0{viewportin=1366x768,viewportout=1920x1079+0+0}"
[ 12.717] (II) NVIDIA(1): Virtual screen size determined to be 1920 x 1080
[ 12.720] (--) NVIDIA(1): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 12.720] (--) NVIDIA(1): option
[ 12.720] (**) NVIDIA(2): Depth 24, (--) framebuffer bpp 32
[ 12.720] (==) NVIDIA(2): RGB weight 888
[ 12.720] (==) NVIDIA(2): Default visual is TrueColor
[ 12.720] (==) NVIDIA(2): Using gamma correction (1.0, 1.0, 1.0)
[ 12.720] (**) NVIDIA(2): Option "Stereo" "0"
[ 12.720] (**) NVIDIA(2): Option "nvidiaXineramaInfoOrder" "DFP-3"
[ 12.720] (**) NVIDIA(2): Option "SLI" "Off"
[ 12.720] (**) NVIDIA(2): Option "MultiGPU" "Off"
[ 12.720] (**) NVIDIA(2): Option "BaseMosaic" "off"
[ 12.720] (**) NVIDIA(2): Option "AllowEmptyInitialConfiguration"
[ 12.720] (**) NVIDIA(2): Stereo disabled by request
[ 12.720] (**) NVIDIA(2): NVIDIA SLI disabled.
[ 12.720] (**) NVIDIA(2): NVIDIA Multi-GPU disabled.
[ 12.721] (II) NVIDIA(2): NVIDIA GPU NVS 310 (GF119) at PCI:3:0:0 (GPU-1)
[ 12.721] (--) NVIDIA(2): Memory: 524288 kBytes
[ 12.721] (--) NVIDIA(2): VideoBIOS: 75.19.57.00.06
[ 12.721] (II) NVIDIA(2): Detected PCI Express Link width: 16X
[ 12.723] (II) NVIDIA(2): Validated MetaModes:
[ 12.724] (II) NVIDIA(2): "DP-3:nvidia-auto-select+0+0{AllowGSYNC=Off}"
[ 12.724] (II) NVIDIA(2): Virtual screen size determined to be 1920 x 1080
[ 12.727] (--) NVIDIA(2): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 12.727] (--) NVIDIA(2): option
[ 12.727] (**) NVIDIA(3): Depth 24, (--) framebuffer bpp 32
[ 12.727] (==) NVIDIA(3): RGB weight 888
[ 12.727] (==) NVIDIA(3): Default visual is TrueColor
[ 12.727] (==) NVIDIA(3): Using gamma correction (1.0, 1.0, 1.0)
[ 12.727] (II) Applying OutputClass "nvidia" options to /dev/dri/card2
[ 12.727] (**) NVIDIA(3): Option "Stereo" "0"
[ 12.727] (**) NVIDIA(3): Option "nvidiaXineramaInfoOrder" "DFP-2"
[ 12.727] (**) NVIDIA(3): Option "SLI" "Off"
[ 12.727] (**) NVIDIA(3): Option "MultiGPU" "Off"
[ 12.727] (**) NVIDIA(3): Option "BaseMosaic" "off"
[ 12.727] (**) NVIDIA(3): Option "AllowEmptyInitialConfiguration"
[ 12.727] (**) NVIDIA(3): Stereo disabled by request
[ 12.727] (**) NVIDIA(3): NVIDIA SLI disabled.
[ 12.727] (**) NVIDIA(3): NVIDIA Multi-GPU disabled.
[ 12.728] (**) NVIDIA(3): Option "MetaModes" "DP-2: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
[ 12.728] (II) Applying OutputClass "nvidia" options to /dev/dri/card2
[ 12.728] (**) NVIDIA(4): Option "MetaModes" "DP-3: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
[ 12.728] (**) NVIDIA(3): Enabling 2D acceleration
[ 13.675] (--) NVIDIA(0): Valid display device(s) on GPU-2 at PCI:5:0:0
[ 13.675] (--) NVIDIA(0): DFP-0
[ 13.675] (--) NVIDIA(0): DFP-1
[ 13.675] (--) NVIDIA(0): DFP-2 (boot)
[ 13.675] (--) NVIDIA(0): DFP-3
[ 13.676] (II) NVIDIA(3): NVIDIA GPU NVS 310 (GF119) at PCI:5:0:0 (GPU-2)
[ 13.676] (--) NVIDIA(3): Memory: 524288 kBytes
[ 13.676] (--) NVIDIA(3): VideoBIOS: 75.19.57.00.06
[ 13.676] (II) NVIDIA(3): Detected PCI Express Link width: 16X
[ 13.678] (--) NVIDIA(GPU-2): DFP-0: disconnected
[ 13.678] (--) NVIDIA(GPU-2): DFP-0: Internal TMDS
[ 13.678] (--) NVIDIA(GPU-2): DFP-0: 165.0 MHz maximum pixel clock
[ 13.678] (--) NVIDIA(GPU-2):
[ 13.681] (--) NVIDIA(GPU-2): DFP-1: disconnected
[ 13.681] (--) NVIDIA(GPU-2): DFP-1: Internal TMDS
[ 13.681] (--) NVIDIA(GPU-2): DFP-1: 165.0 MHz maximum pixel clock
[ 13.681] (--) NVIDIA(GPU-2):
[ 13.681] (--) NVIDIA(GPU-2): Idek Iiyama PL2493H (DFP-2): connected
[ 13.681] (--) NVIDIA(GPU-2): Idek Iiyama PL2493H (DFP-2): Internal DisplayPort
[ 13.681] (--) NVIDIA(GPU-2): Idek Iiyama PL2493H (DFP-2): 480.0 MHz maximum pixel clock
[ 13.681] (--) NVIDIA(GPU-2):
[ 13.681] (--) NVIDIA(GPU-2): Idek Iiyama PL2493H (DFP-3): connected
[ 13.681] (--) NVIDIA(GPU-2): Idek Iiyama PL2493H (DFP-3): Internal DisplayPort
[ 13.681] (--) NVIDIA(GPU-2): Idek Iiyama PL2493H (DFP-3): 480.0 MHz maximum pixel clock
[ 13.681] (--) NVIDIA(GPU-2):
[ 13.685] (II) NVIDIA(3): Validated MetaModes:
[ 13.685] (II) NVIDIA(3): "DP-2:nvidia-auto-select+0+0{AllowGSYNC=Off}"
[ 13.685] (II) NVIDIA(3): Virtual screen size determined to be 1920 x 1080
[ 13.689] (--) NVIDIA(3): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 13.689] (--) NVIDIA(3): option
[ 13.689] (**) NVIDIA(4): Depth 24, (--) framebuffer bpp 32
[ 13.689] (==) NVIDIA(4): RGB weight 888
[ 13.689] (==) NVIDIA(4): Default visual is TrueColor
[ 13.689] (==) NVIDIA(4): Using gamma correction (1.0, 1.0, 1.0)
[ 13.689] (**) NVIDIA(4): Option "Stereo" "0"
[ 13.689] (**) NVIDIA(4): Option "nvidiaXineramaInfoOrder" "DFP-3"
[ 13.689] (**) NVIDIA(4): Option "SLI" "Off"
[ 13.689] (**) NVIDIA(4): Option "MultiGPU" "Off"
[ 13.689] (**) NVIDIA(4): Option "BaseMosaic" "off"
[ 13.689] (**) NVIDIA(4): Option "AllowEmptyInitialConfiguration"
[ 13.689] (**) NVIDIA(4): Stereo disabled by request
[ 13.689] (**) NVIDIA(4): NVIDIA SLI disabled.
[ 13.689] (**) NVIDIA(4): NVIDIA Multi-GPU disabled.
[ 13.689] (II) NVIDIA(4): NVIDIA GPU NVS 310 (GF119) at PCI:5:0:0 (GPU-2)
[ 13.689] (--) NVIDIA(4): Memory: 524288 kBytes
[ 13.689] (--) NVIDIA(4): VideoBIOS: 75.19.57.00.06
[ 13.689] (II) NVIDIA(4): Detected PCI Express Link width: 16X
[ 13.692] (II) NVIDIA(4): Validated MetaModes:
[ 13.692] (II) NVIDIA(4): "DP-3:nvidia-auto-select+0+0{AllowGSYNC=Off}"
[ 13.692] (II) NVIDIA(4): Virtual screen size determined to be 1920 x 1080
[ 13.697] (--) NVIDIA(4): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 13.697] (--) NVIDIA(4): option
[ 13.697] (**) NVIDIA(5): Depth 24, (--) framebuffer bpp 32
[ 13.697] (==) NVIDIA(5): RGB weight 888
[ 13.697] (==) NVIDIA(5): Default visual is TrueColor
[ 13.697] (==) NVIDIA(5): Using gamma correction (1.0, 1.0, 1.0)
[ 13.697] (II) Applying OutputClass "nvidia" options to /dev/dri/card3
[ 13.697] (**) NVIDIA(5): Option "Stereo" "0"
[ 13.697] (**) NVIDIA(5): Option "nvidiaXineramaInfoOrder" "DFP-2"
[ 13.697] (**) NVIDIA(5): Option "SLI" "Off"
[ 13.697] (**) NVIDIA(5): Option "MultiGPU" "Off"
[ 13.697] (**) NVIDIA(5): Option "BaseMosaic" "off"
[ 13.697] (**) NVIDIA(5): Option "AllowEmptyInitialConfiguration"
[ 13.697] (**) NVIDIA(5): Stereo disabled by request
[ 13.697] (**) NVIDIA(5): NVIDIA SLI disabled.
[ 13.697] (**) NVIDIA(5): NVIDIA Multi-GPU disabled.
[ 13.697] (**) NVIDIA(5): Option "MetaModes" "DP-2: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
[ 13.697] (II) Applying OutputClass "nvidia" options to /dev/dri/card3
[ 13.697] (**) NVIDIA(6): Option "MetaModes" "DP-3: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
[ 13.697] (**) NVIDIA(5): Enabling 2D acceleration
[ 14.650] (--) NVIDIA(0): Valid display device(s) on GPU-3 at PCI:6:0:0
[ 14.650] (--) NVIDIA(0): DFP-0
[ 14.650] (--) NVIDIA(0): DFP-1
[ 14.650] (--) NVIDIA(0): DFP-2 (boot)
[ 14.650] (--) NVIDIA(0): DFP-3
[ 14.651] (II) NVIDIA(5): NVIDIA GPU NVS 310 (GF119) at PCI:6:0:0 (GPU-3)
[ 14.651] (--) NVIDIA(5): Memory: 524288 kBytes
[ 14.651] (--) NVIDIA(5): VideoBIOS: 75.19.57.00.06
[ 14.651] (II) NVIDIA(5): Detected PCI Express Link width: 16X
[ 14.654] (--) NVIDIA(GPU-3): DFP-0: disconnected
[ 14.654] (--) NVIDIA(GPU-3): DFP-0: Internal TMDS
[ 14.654] (--) NVIDIA(GPU-3): DFP-0: 165.0 MHz maximum pixel clock
[ 14.654] (--) NVIDIA(GPU-3):
[ 14.656] (--) NVIDIA(GPU-3): DFP-1: disconnected
[ 14.656] (--) NVIDIA(GPU-3): DFP-1: Internal TMDS
[ 14.656] (--) NVIDIA(GPU-3): DFP-1: 165.0 MHz maximum pixel clock
[ 14.656] (--) NVIDIA(GPU-3):
[ 14.656] (--) NVIDIA(GPU-3): Idek Iiyama PL2493H (DFP-2): connected
[ 14.656] (--) NVIDIA(GPU-3): Idek Iiyama PL2493H (DFP-2): Internal DisplayPort
[ 14.656] (--) NVIDIA(GPU-3): Idek Iiyama PL2493H (DFP-2): 480.0 MHz maximum pixel clock
[ 14.656] (--) NVIDIA(GPU-3):
[ 14.656] (--) NVIDIA(GPU-3): Idek Iiyama PL2493H (DFP-3): connected
[ 14.656] (--) NVIDIA(GPU-3): Idek Iiyama PL2493H (DFP-3): Internal DisplayPort
[ 14.656] (--) NVIDIA(GPU-3): Idek Iiyama PL2493H (DFP-3): 480.0 MHz maximum pixel clock
[ 14.656] (--) NVIDIA(GPU-3):
[ 14.660] (II) NVIDIA(5): Validated MetaModes:
[ 14.660] (II) NVIDIA(5): "DP-2:nvidia-auto-select+0+0{AllowGSYNC=Off}"
[ 14.660] (II) NVIDIA(5): Virtual screen size determined to be 1920 x 1080
[ 14.665] (--) NVIDIA(5): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 14.665] (--) NVIDIA(5): option
[ 14.665] (**) NVIDIA(6): Depth 24, (--) framebuffer bpp 32
[ 14.665] (==) NVIDIA(6): RGB weight 888
[ 14.665] (==) NVIDIA(6): Default visual is TrueColor
[ 14.665] (==) NVIDIA(6): Using gamma correction (1.0, 1.0, 1.0)
[ 14.665] (**) NVIDIA(6): Option "Stereo" "0"
[ 14.665] (**) NVIDIA(6): Option "SLI" "Off"
[ 14.665] (**) NVIDIA(6): Option "MultiGPU" "Off"
[ 14.665] (**) NVIDIA(6): Option "BaseMosaic" "off"
[ 14.665] (**) NVIDIA(6): Option "AllowEmptyInitialConfiguration"
[ 14.665] (**) NVIDIA(6): Stereo disabled by request
[ 14.665] (**) NVIDIA(6): NVIDIA SLI disabled.
[ 14.665] (**) NVIDIA(6): NVIDIA Multi-GPU disabled.
[ 14.665] (II) NVIDIA(6): NVIDIA GPU NVS 310 (GF119) at PCI:6:0:0 (GPU-3)
[ 14.665] (--) NVIDIA(6): Memory: 524288 kBytes
[ 14.665] (--) NVIDIA(6): VideoBIOS: 75.19.57.00.06
[ 14.665] (II) NVIDIA(6): Detected PCI Express Link width: 16X
[ 14.669] (II) NVIDIA(6): Validated MetaModes:
[ 14.669] (II) NVIDIA(6): "DP-3:nvidia-auto-select+0+0{AllowGSYNC=Off}"
[ 14.669] (II) NVIDIA(6): Virtual screen size determined to be 1920 x 1080
[ 14.673] (--) NVIDIA(6): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 14.673] (--) NVIDIA(6): option
[ 14.675] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 14.675] (II) NVIDIA: access.
[ 14.677] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 14.677] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 14.677] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 14.677] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 14.677] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 14.677] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 14.677] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 14.677] (II) NVIDIA(0): Config Options in the README.
[ 14.706] (II) NVIDIA(0): Setting mode "DP-2:nvidia-auto-select+0+0,DP-3:nvidia-auto-select+1920+0"
[ 14.895] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 14.895] (==) NVIDIA(0): Backing store enabled
[ 14.895] (==) NVIDIA(0): Silken mouse disabled
[ 14.895] (**) NVIDIA(0): DPMS enabled
[ 14.896] (II) Loading sub module "dri2"
[ 14.896] (II) LoadModule: "dri2"
[ 14.896] (II) Module "dri2" already built-in
[ 14.896] (II) NVIDIA(0): [DRI2] Setup complete
[ 14.896] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 14.896] (WW) NVIDIA(0): Not registering RandR
[ 14.898] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 14.898] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
[ 14.898] (II) NVIDIA(1): configuration option may not be set correctly. When the
[ 14.898] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
[ 14.898] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
[ 14.898] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
[ 14.898] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 14.898] (II) NVIDIA(1): Config Options in the README.
[ 14.925] (II) NVIDIA(1): Setting mode "DP-2:nvidia-auto-select+0+0{AllowGSYNC=Off}"
[ 14.973] (==) NVIDIA(1): Disabling shared memory pixmaps
[ 14.973] (==) NVIDIA(1): Backing store enabled
[ 14.973] (==) NVIDIA(1): Silken mouse disabled
[ 14.973] (**) NVIDIA(1): DPMS enabled
[ 14.974] (II) Loading sub module "dri2"
[ 14.974] (II) LoadModule: "dri2"
[ 14.974] (II) Module "dri2" already built-in
[ 14.974] (II) NVIDIA(1): [DRI2] Setup complete
[ 14.974] (II) NVIDIA(1): [DRI2] VDPAU driver: nvidia
[ 14.974] (WW) NVIDIA(1): Not registering RandR
[ 14.976] (II) NVIDIA(2): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 14.976] (II) NVIDIA(2): may not be running or the "AcpidSocketPath" X
[ 14.976] (II) NVIDIA(2): configuration option may not be set correctly. When the
[ 14.976] (II) NVIDIA(2): ACPI event daemon is available, the NVIDIA X driver will
[ 14.976] (II) NVIDIA(2): try to use it to receive ACPI event notifications. For
[ 14.976] (II) NVIDIA(2): details, please see the "ConnectToAcpid" and
[ 14.976] (II) NVIDIA(2): "AcpidSocketPath" X configuration options in Appendix B: X
[ 14.976] (II) NVIDIA(2): Config Options in the README.
[ 15.003] (II) NVIDIA(2): Setting mode "DP-3:nvidia-auto-select+0+0{AllowGSYNC=Off}"
[ 15.123] (==) NVIDIA(2): Disabling shared memory pixmaps
[ 15.123] (==) NVIDIA(2): Backing store enabled
[ 15.123] (==) NVIDIA(2): Silken mouse disabled
[ 15.123] (==) NVIDIA(2): DPMS enabled
[ 15.123] (II) Loading sub module "dri2"
[ 15.123] (II) LoadModule: "dri2"
[ 15.123] (II) Module "dri2" already built-in
[ 15.123] (II) NVIDIA(2): [DRI2] Setup complete
[ 15.123] (II) NVIDIA(2): [DRI2] VDPAU driver: nvidia
[ 15.123] (WW) NVIDIA(2): Not registering RandR
[ 15.126] (II) NVIDIA(3): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 15.126] (II) NVIDIA(3): may not be running or the "AcpidSocketPath" X
[ 15.126] (II) NVIDIA(3): configuration option may not be set correctly. When the
[ 15.126] (II) NVIDIA(3): ACPI event daemon is available, the NVIDIA X driver will
[ 15.126] (II) NVIDIA(3): try to use it to receive ACPI event notifications. For
[ 15.126] (II) NVIDIA(3): details, please see the "ConnectToAcpid" and
[ 15.126] (II) NVIDIA(3): "AcpidSocketPath" X configuration options in Appendix B: X
[ 15.126] (II) NVIDIA(3): Config Options in the README.
[ 15.153] (II) NVIDIA(3): Setting mode "DP-2:nvidia-auto-select+0+0{AllowGSYNC=Off}"
[ 15.201] (==) NVIDIA(3): Disabling shared memory pixmaps
[ 15.201] (==) NVIDIA(3): Backing store enabled
[ 15.201] (==) NVIDIA(3): Silken mouse disabled
[ 15.201] (==) NVIDIA(3): DPMS enabled
[ 15.201] (II) Loading sub module "dri2"
[ 15.201] (II) LoadModule: "dri2"
[ 15.201] (II) Module "dri2" already built-in
[ 15.201] (II) NVIDIA(3): [DRI2] Setup complete
[ 15.201] (II) NVIDIA(3): [DRI2] VDPAU driver: nvidia
[ 15.201] (WW) NVIDIA(3): Not registering RandR
[ 15.203] (II) NVIDIA(4): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 15.203] (II) NVIDIA(4): may not be running or the "AcpidSocketPath" X
[ 15.203] (II) NVIDIA(4): configuration option may not be set correctly. When the
[ 15.203] (II) NVIDIA(4): ACPI event daemon is available, the NVIDIA X driver will
[ 15.203] (II) NVIDIA(4): try to use it to receive ACPI event notifications. For
[ 15.203] (II) NVIDIA(4): details, please see the "ConnectToAcpid" and
[ 15.203] (II) NVIDIA(4): "AcpidSocketPath" X configuration options in Appendix B: X
[ 15.203] (II) NVIDIA(4): Config Options in the README.
[ 15.230] (II) NVIDIA(4): Setting mode "DP-3:nvidia-auto-select+0+0{AllowGSYNC=Off}"
[ 15.335] (==) NVIDIA(4): Disabling shared memory pixmaps
[ 15.335] (==) NVIDIA(4): Backing store enabled
[ 15.335] (==) NVIDIA(4): Silken mouse disabled
[ 15.335] (==) NVIDIA(4): DPMS enabled
[ 15.335] (II) Loading sub module "dri2"
[ 15.335] (II) LoadModule: "dri2"
[ 15.335] (II) Module "dri2" already built-in
[ 15.335] (II) NVIDIA(4): [DRI2] Setup complete
[ 15.335] (II) NVIDIA(4): [DRI2] VDPAU driver: nvidia
[ 15.335] (WW) NVIDIA(4): Not registering RandR
[ 15.337] (II) NVIDIA(5): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 15.337] (II) NVIDIA(5): may not be running or the "AcpidSocketPath" X
[ 15.337] (II) NVIDIA(5): configuration option may not be set correctly. When the
[ 15.337] (II) NVIDIA(5): ACPI event daemon is available, the NVIDIA X driver will
[ 15.337] (II) NVIDIA(5): try to use it to receive ACPI event notifications. For
[ 15.337] (II) NVIDIA(5): details, please see the "ConnectToAcpid" and
[ 15.337] (II) NVIDIA(5): "AcpidSocketPath" X configuration options in Appendix B: X
[ 15.337] (II) NVIDIA(5): Config Options in the README.
[ 15.364] (II) NVIDIA(5): Setting mode "DP-2:nvidia-auto-select+0+0{AllowGSYNC=Off}"
[ 15.413] (==) NVIDIA(5): Disabling shared memory pixmaps
[ 15.413] (==) NVIDIA(5): Backing store enabled
[ 15.413] (==) NVIDIA(5): Silken mouse disabled
[ 15.413] (==) NVIDIA(5): DPMS enabled
[ 15.413] (II) Loading sub module "dri2"
[ 15.413] (II) LoadModule: "dri2"
[ 15.413] (II) Module "dri2" already built-in
[ 15.413] (II) NVIDIA(5): [DRI2] Setup complete
[ 15.413] (II) NVIDIA(5): [DRI2] VDPAU driver: nvidia
[ 15.413] (WW) NVIDIA(5): Not registering RandR
[ 15.415] (II) NVIDIA(6): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 15.415] (II) NVIDIA(6): may not be running or the "AcpidSocketPath" X
[ 15.415] (II) NVIDIA(6): configuration option may not be set correctly. When the
[ 15.415] (II) NVIDIA(6): ACPI event daemon is available, the NVIDIA X driver will
[ 15.415] (II) NVIDIA(6): try to use it to receive ACPI event notifications. For
[ 15.415] (II) NVIDIA(6): details, please see the "ConnectToAcpid" and
[ 15.415] (II) NVIDIA(6): "AcpidSocketPath" X configuration options in Appendix B: X
[ 15.415] (II) NVIDIA(6): Config Options in the README.
[ 15.442] (II) NVIDIA(6): Setting mode "DP-3:nvidia-auto-select+0+0{AllowGSYNC=Off}"
[ 15.546] (==) NVIDIA(6): Disabling shared memory pixmaps
[ 15.546] (==) NVIDIA(6): Backing store enabled
[ 15.546] (==) NVIDIA(6): Silken mouse disabled
[ 15.546] (==) NVIDIA(6): DPMS enabled
[ 15.546] (II) Loading sub module "dri2"
[ 15.546] (II) LoadModule: "dri2"
[ 15.546] (II) Module "dri2" already built-in
[ 15.546] (II) NVIDIA(6): [DRI2] Setup complete
[ 15.546] (II) NVIDIA(6): [DRI2] VDPAU driver: nvidia
[ 15.546] (WW) NVIDIA(6): Not registering RandR
[ 15.546] (II) Initializing extension Generic Event Extension
[ 15.546] (II) Initializing extension SHAPE
[ 15.546] (II) Initializing extension MIT-SHM
[ 15.546] (II) Initializing extension XInputExtension
[ 15.548] (II) Initializing extension XTEST
[ 15.548] (II) Initializing extension BIG-REQUESTS
[ 15.548] (II) Initializing extension SYNC
[ 15.548] (II) Initializing extension XKEYBOARD
[ 15.548] (II) Initializing extension XC-MISC
[ 15.548] (II) Initializing extension SECURITY
[ 15.549] (II) Initializing extension XINERAMA
[ 15.549] (II) Initializing extension XFIXES
[ 15.549] (II) Initializing extension RENDER
[ 15.549] (II) Initializing extension RANDR
[ 15.549] (II) Initializing extension COMPOSITE
[ 15.549] (II) Initializing extension DAMAGE
[ 15.549] (II) Initializing extension MIT-SCREEN-SAVER
[ 15.549] (II) Initializing extension DOUBLE-BUFFER
[ 15.549] (II) Initializing extension RECORD
[ 15.549] (II) Initializing extension DPMS
[ 15.549] (II) Initializing extension Present
[ 15.549] (II) Initializing extension DRI3
[ 15.549] (II) Initializing extension X-Resource
[ 15.549] (II) Initializing extension XVideo
[ 15.550] (II) Initializing extension XVideo-MotionCompensation
[ 15.550] (II) Initializing extension XFree86-VidModeExtension
[ 15.550] (II) Initializing extension XFree86-DGA
[ 15.550] (II) Initializing extension XFree86-DRI
[ 15.550] (II) Initializing extension DRI2
[ 15.550] (II) Initializing extension GLX
[ 15.550] (II) Initializing extension GLX
[ 15.550] (II) Indirect GLX disabled.
[ 15.550] (II) Initializing extension NV-GLX
[ 15.550] (II) Initializing extension NV-CONTROL
[ 15.967] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 15.967] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.967] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 15.967] (II) LoadModule: "libinput"
[ 15.967] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 15.970] (II) Module libinput: vendor="X.Org Foundation"
[ 15.970] compiled for 1.20.13, module version = 1.2.0
[ 15.970] Module class: X.Org XInput Driver
[ 15.970] ABI class: X.Org XInput driver, version 24.1
[ 15.970] (II) Using input driver 'libinput' for 'Power Button'
[ 15.970] (**) Power Button: always reports core events
[ 15.970] (**) Option "Device" "/dev/input/event1"
[ 15.970] (**) Option "_source" "server/udev"
[ 15.976] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 15.976] (II) event1 - Power Button: device is a keyboard
[ 15.976] (II) event1 - Power Button: device removed
[ 16.022] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 16.022] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.023] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 16.023] (II) event1 - Power Button: device is a keyboard
[ 16.025] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 16.025] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.025] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 16.025] (II) Using input driver 'libinput' for 'Power Button'
[ 16.025] (**) Power Button: always reports core events
[ 16.025] (**) Option "Device" "/dev/input/event0"
[ 16.025] (**) Option "_source" "server/udev"
[ 16.026] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 16.026] (II) event0 - Power Button: device is a keyboard
[ 16.026] (II) event0 - Power Button: device removed
[ 16.062] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 16.062] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.064] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 16.064] (II) event0 - Power Button: device is a keyboard
[ 16.065] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event19)
[ 16.065] (II) No input driver specified, ignoring this device.
[ 16.065] (II) This device may have been added with another device file.
[ 16.066] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event20)
[ 16.066] (II) No input driver specified, ignoring this device.
[ 16.066] (II) This device may have been added with another device file.
[ 16.066] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event21)
[ 16.066] (II) No input driver specified, ignoring this device.
[ 16.066] (II) This device may have been added with another device file.
[ 16.067] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event22)
[ 16.067] (II) No input driver specified, ignoring this device.
[ 16.067] (II) This device may have been added with another device file.
[ 16.067] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[ 16.067] (II) No input driver specified, ignoring this device.
[ 16.067] (II) This device may have been added with another device file.
[ 16.068] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event18)
[ 16.068] (II) No input driver specified, ignoring this device.
[ 16.068] (II) This device may have been added with another device file.
[ 16.068] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 16.068] (II) No input driver specified, ignoring this device.
[ 16.068] (II) This device may have been added with another device file.
[ 16.069] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 16.069] (II) No input driver specified, ignoring this device.
[ 16.069] (II) This device may have been added with another device file.
[ 16.069] (II) config/udev: Adding input device A4TECH USB Device Keyboard (/dev/input/event2)
[ 16.069] (**) A4TECH USB Device Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.069] (**) A4TECH USB Device Keyboard: Applying InputClass "libinput keyboard catchall"
[ 16.069] (II) Using input driver 'libinput' for 'A4TECH USB Device Keyboard'
[ 16.069] (**) A4TECH USB Device Keyboard: always reports core events
[ 16.069] (**) Option "Device" "/dev/input/event2"
[ 16.069] (**) Option "_source" "server/udev"
[ 16.071] (II) event2 - A4TECH USB Device Keyboard: is tagged by udev as: Keyboard
[ 16.071] (II) event2 - A4TECH USB Device Keyboard: device is a keyboard
[ 16.071] (II) event2 - A4TECH USB Device Keyboard: device removed
[ 16.115] (II) libinput: A4TECH USB Device Keyboard: needs a virtual subdevice
[ 16.115] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:09DA:9066.0001/input/input2/event2"
[ 16.115] (II) XINPUT: Adding extended input device "A4TECH USB Device Keyboard" (type: MOUSE, id 8)
[ 16.115] (**) Option "AccelerationScheme" "none"
[ 16.116] (**) A4TECH USB Device Keyboard: (accel) selected scheme none/0
[ 16.116] (**) A4TECH USB Device Keyboard: (accel) acceleration factor: 2.000
[ 16.116] (**) A4TECH USB Device Keyboard: (accel) acceleration threshold: 4
[ 16.118] (II) event2 - A4TECH USB Device Keyboard: is tagged by udev as: Keyboard
[ 16.118] (II) event2 - A4TECH USB Device Keyboard: device is a keyboard
[ 16.119] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event3)
[ 16.119] (II) No input driver specified, ignoring this device.
[ 16.119] (II) This device may have been added with another device file.
[ 16.120] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event4)
[ 16.120] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
[ 16.120] (**) A4TECH USB Device: Applying InputClass "libinput pointer catchall"
[ 16.120] (II) Using input driver 'libinput' for 'A4TECH USB Device'
[ 16.120] (**) A4TECH USB Device: always reports core events
[ 16.120] (**) Option "Device" "/dev/input/event4"
[ 16.120] (**) Option "_source" "server/udev"
[ 16.177] (II) event4 - A4TECH USB Device: is tagged by udev as: Mouse
[ 16.177] (II) event4 - A4TECH USB Device: device is a pointer
[ 16.177] (II) event4 - A4TECH USB Device: device removed
[ 16.235] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:09DA:9066.0002/input/input4/event4"
[ 16.235] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 9)
[ 16.235] (**) Option "AccelerationScheme" "none"
[ 16.235] (**) A4TECH USB Device: (accel) selected scheme none/0
[ 16.235] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[ 16.235] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[ 16.294] (II) event4 - A4TECH USB Device: is tagged by udev as: Mouse
[ 16.294] (II) event4 - A4TECH USB Device: device is a pointer
[ 16.296] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
[ 16.296] (II) No input driver specified, ignoring this device.
[ 16.296] (II) This device may have been added with another device file.
[ 16.297] (II) config/udev: Adding input device Lenovo ThinkPad Compact USB Keyboard with TrackPoint (/dev/input/event13)
[ 16.297] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 16.297] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "libinput keyboard catchall"
[ 16.297] (II) Using input driver 'libinput' for 'Lenovo ThinkPad Compact USB Keyboard with TrackPoint'
[ 16.297] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: always reports core events
[ 16.297] (**) Option "Device" "/dev/input/event13"
[ 16.297] (**) Option "_source" "server/udev"
[ 16.300] (II) event13 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is tagged by udev as: Keyboard
[ 16.300] (II) event13 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device is a keyboard
[ 16.301] (II) event13 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device removed
[ 16.329] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:17EF:6047.0003/input/input13/event13"
[ 16.329] (II) XINPUT: Adding extended input device "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" (type: KEYBOARD, id 10)
[ 16.331] (II) event13 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is tagged by udev as: Keyboard
[ 16.332] (II) event13 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device is a keyboard
[ 16.334] (II) config/udev: Adding input device Lenovo ThinkPad Compact USB Keyboard with TrackPoint (/dev/input/event14)
[ 16.334] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "evdev pointer catchall"
[ 16.334] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 16.334] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "libinput pointer catchall"
[ 16.334] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "libinput keyboard catchall"
[ 16.334] (II) Using input driver 'libinput' for 'Lenovo ThinkPad Compact USB Keyboard with TrackPoint'
[ 16.334] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: always reports core events
[ 16.334] (**) Option "Device" "/dev/input/event14"
[ 16.334] (**) Option "_source" "server/udev"
[ 16.336] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is tagged by udev as: Keyboard Mouse Pointingstick
[ 16.336] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is an external pointing stick
[ 16.337] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device is a pointer
[ 16.337] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device is a keyboard
[ 16.337] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device removed
[ 16.382] (II) libinput: Lenovo ThinkPad Compact USB Keyboard with TrackPoint: needs a virtual subdevice
[ 16.382] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:17EF:6047.0004/input/input14/event14"
[ 16.382] (II) XINPUT: Adding extended input device "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" (type: MOUSE, id 11)
[ 16.382] (**) Option "AccelerationScheme" "none"
[ 16.382] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: (accel) selected scheme none/0
[ 16.382] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: (accel) acceleration factor: 2.000
[ 16.382] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: (accel) acceleration threshold: 4
[ 16.385] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is tagged by udev as: Keyboard Mouse Pointingstick
[ 16.385] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is an external pointing stick
[ 16.385] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device is a pointer
[ 16.385] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device is a keyboard
[ 16.387] (II) config/udev: Adding input device Lenovo ThinkPad Compact USB Keyboard with TrackPoint (/dev/input/mouse1)
[ 16.387] (II) No input driver specified, ignoring this device.
[ 16.387] (II) This device may have been added with another device file.
[ 16.388] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 16.388] (II) No input driver specified, ignoring this device.
[ 16.388] (II) This device may have been added with another device file.
[ 16.389] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
[ 16.389] (II) No input driver specified, ignoring this device.
[ 16.389] (II) This device may have been added with another device file.
[ 16.389] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12)
[ 16.389] (II) No input driver specified, ignoring this device.
[ 16.389] (II) This device may have been added with another device file.
[ 16.390] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
[ 16.390] (II) No input driver specified, ignoring this device.
[ 16.390] (II) This device may have been added with another device file.
[ 16.391] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[ 16.391] (II) No input driver specified, ignoring this device.
[ 16.391] (II) This device may have been added with another device file.
[ 16.391] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 16.391] (II) No input driver specified, ignoring this device.
[ 16.391] (II) This device may have been added with another device file.
[ 16.392] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[ 16.392] (II) No input driver specified, ignoring this device.
[ 16.392] (II) This device may have been added with another device file.
[ 16.393] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 16.393] (II) No input driver specified, ignoring this device.
[ 16.393] (II) This device may have been added with another device file.
[ 16.405] (**) A4TECH USB Device Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.405] (**) A4TECH USB Device Keyboard: Applying InputClass "libinput keyboard catchall"
[ 16.405] (II) Using input driver 'libinput' for 'A4TECH USB Device Keyboard'
[ 16.405] (**) A4TECH USB Device Keyboard: always reports core events
[ 16.405] (**) Option "Device" "/dev/input/event2"
[ 16.405] (**) Option "_source" "_driver/libinput"
[ 16.405] (II) libinput: A4TECH USB Device Keyboard: is a virtual subdevice
[ 16.406] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:09DA:9066.0001/input/input2/event2"
[ 16.406] (II) XINPUT: Adding extended input device "A4TECH USB Device Keyboard" (type: KEYBOARD, id 12)
[ 16.406] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "evdev pointer catchall"
[ 16.406] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 16.406] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "libinput pointer catchall"
[ 16.406] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "libinput keyboard catchall"
[ 16.406] (II) Using input driver 'libinput' for 'Lenovo ThinkPad Compact USB Keyboard with TrackPoint'
[ 16.406] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: always reports core events
[ 16.406] (**) Option "Device" "/dev/input/event14"
[ 16.406] (**) Option "_source" "_driver/libinput"
[ 16.406] (II) libinput: Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is a virtual subdevice
[ 16.406] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:17EF:6047.0004/input/input14/event14"
[ 16.406] (II) XINPUT: Adding extended input device "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" (type: KEYBOARD, id 13)
[ 16.407] (--) NVIDIA(GPU-0): Idek Iiyama PL2493H (DFP-2): connected
[ 16.407] (--) NVIDIA(GPU-0): Idek Iiyama PL2493H (DFP-2): Internal DisplayPort
[ 16.407] (--) NVIDIA(GPU-0): Idek Iiyama PL2493H (DFP-2): 480.0 MHz maximum pixel clock
[ 16.407] (--) NVIDIA(GPU-0):
[ 16.408] (--) NVIDIA(GPU-0): Idek Iiyama PL2493H (DFP-3): connected
[ 16.408] (--) NVIDIA(GPU-0): Idek Iiyama PL2493H (DFP-3): Internal DisplayPort
[ 16.408] (--) NVIDIA(GPU-0): Idek Iiyama PL2493H (DFP-3): 480.0 MHz maximum pixel clock
[ 16.408] (--) NVIDIA(GPU-0):
[ 16.409] (--) NVIDIA(GPU-1): Idek Iiyama PL2493H (DFP-2): connected
[ 16.409] (--) NVIDIA(GPU-1): Idek Iiyama PL2493H (DFP-2): Internal DisplayPort
[ 16.409] (--) NVIDIA(GPU-1): Idek Iiyama PL2493H (DFP-2): 480.0 MHz maximum pixel clock
[ 16.409] (--) NVIDIA(GPU-1):
[ 16.410] (--) NVIDIA(GPU-1): Idek Iiyama PL2493H (DFP-3): connected
[ 16.410] (--) NVIDIA(GPU-1): Idek Iiyama PL2493H (DFP-3): Internal DisplayPort
[ 16.410] (--) NVIDIA(GPU-1): Idek Iiyama PL2493H (DFP-3): 480.0 MHz maximum pixel clock
[ 16.410] (--) NVIDIA(GPU-1):
[ 16.411] (--) NVIDIA(GPU-2): Idek Iiyama PL2493H (DFP-2): connected
[ 16.411] (--) NVIDIA(GPU-2): Idek Iiyama PL2493H (DFP-2): Internal DisplayPort
[ 16.411] (--) NVIDIA(GPU-2): Idek Iiyama PL2493H (DFP-2): 480.0 MHz maximum pixel clock
[ 16.411] (--) NVIDIA(GPU-2):
[ 16.412] (--) NVIDIA(GPU-2): Idek Iiyama PL2493H (DFP-3): connected
[ 16.412] (--) NVIDIA(GPU-2): Idek Iiyama PL2493H (DFP-3): Internal DisplayPort
[ 16.412] (--) NVIDIA(GPU-2): Idek Iiyama PL2493H (DFP-3): 480.0 MHz maximum pixel clock
[ 16.412] (--) NVIDIA(GPU-2):
[ 16.412] (--) NVIDIA(GPU-3): Idek Iiyama PL2493H (DFP-2): connected
[ 16.412] (--) NVIDIA(GPU-3): Idek Iiyama PL2493H (DFP-2): Internal DisplayPort
[ 16.412] (--) NVIDIA(GPU-3): Idek Iiyama PL2493H (DFP-2): 480.0 MHz maximum pixel clock
[ 16.412] (--) NVIDIA(GPU-3):
[ 16.413] (--) NVIDIA(GPU-3): Idek Iiyama PL2493H (DFP-3): connected
[ 16.413] (--) NVIDIA(GPU-3): Idek Iiyama PL2493H (DFP-3): Internal DisplayPort
[ 16.413] (--) NVIDIA(GPU-3): Idek Iiyama PL2493H (DFP-3): 480.0 MHz maximum pixel clock
[ 16.413] (--) NVIDIA(GPU-3):
[ 16.414] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
[ 16.414] (II) No input driver specified, ignoring this device.
[ 16.414] (II) This device may have been added with another device file.
[ 16.414] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[ 16.414] (II) No input driver specified, ignoring this device.
[ 16.414] (II) This device may have been added with another device file.
[ 16.415] (II) config/udev: removing device Lenovo ThinkPad Compact USB Keyboard with TrackPoint
[ 16.415] (II) event13 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device removed
[ 16.435] (II) UnloadModule: "libinput"
[ 16.436] (II) config/udev: Adding input device Lenovo ThinkPad Compact USB Keyboard with TrackPoint (/dev/input/event13)
[ 16.436] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 16.436] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "libinput keyboard catchall"
[ 16.436] (II) Using input driver 'libinput' for 'Lenovo ThinkPad Compact USB Keyboard with TrackPoint'
[ 16.437] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: always reports core events
[ 16.437] (**) Option "Device" "/dev/input/event13"
[ 16.437] (**) Option "_source" "server/udev"
[ 16.439] (II) event13 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is tagged by udev as: Keyboard
[ 16.439] (II) event13 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device is a keyboard
[ 16.440] (II) event13 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device removed
[ 16.475] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:17EF:6047.0003/input/input13/event13"
[ 16.475] (II) XINPUT: Adding extended input device "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" (type: KEYBOARD, id 10)
[ 16.478] (II) event13 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is tagged by udev as: Keyboard
[ 16.478] (II) event13 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device is a keyboard
[ 16.480] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
[ 16.480] (II) No input driver specified, ignoring this device.
[ 16.480] (II) This device may have been added with another device file.
[ 16.481] (II) config/udev: removing device A4TECH USB Device Keyboard
[ 16.481] (II) UnloadModule: "libinput"
[ 16.481] (II) config/udev: removing device A4TECH USB Device Keyboard
[ 16.481] (II) event2 - A4TECH USB Device Keyboard: device removed
[ 16.515] (II) UnloadModule: "libinput"
[ 16.516] (II) config/udev: Adding input device A4TECH USB Device Keyboard (/dev/input/event2)
[ 16.516] (**) A4TECH USB Device Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.516] (**) A4TECH USB Device Keyboard: Applying InputClass "libinput keyboard catchall"
[ 16.516] (II) Using input driver 'libinput' for 'A4TECH USB Device Keyboard'
[ 16.516] (**) A4TECH USB Device Keyboard: always reports core events
[ 16.516] (**) Option "Device" "/dev/input/event2"
[ 16.516] (**) Option "_source" "server/udev"
[ 16.517] (II) event2 - A4TECH USB Device Keyboard: is tagged by udev as: Keyboard
[ 16.517] (II) event2 - A4TECH USB Device Keyboard: device is a keyboard
[ 16.517] (II) event2 - A4TECH USB Device Keyboard: device removed
[ 16.542] (II) libinput: A4TECH USB Device Keyboard: needs a virtual subdevice
[ 16.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:09DA:9066.0001/input/input2/event2"
[ 16.542] (II) XINPUT: Adding extended input device "A4TECH USB Device Keyboard" (type: MOUSE, id 8)
[ 16.542] (**) Option "AccelerationScheme" "none"
[ 16.542] (**) A4TECH USB Device Keyboard: (accel) selected scheme none/0
[ 16.542] (**) A4TECH USB Device Keyboard: (accel) acceleration factor: 2.000
[ 16.542] (**) A4TECH USB Device Keyboard: (accel) acceleration threshold: 4
[ 16.544] (II) event2 - A4TECH USB Device Keyboard: is tagged by udev as: Keyboard
[ 16.544] (II) event2 - A4TECH USB Device Keyboard: device is a keyboard
[ 16.545] (**) A4TECH USB Device Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.545] (**) A4TECH USB Device Keyboard: Applying InputClass "libinput keyboard catchall"
[ 16.545] (II) Using input driver 'libinput' for 'A4TECH USB Device Keyboard'
[ 16.545] (**) A4TECH USB Device Keyboard: always reports core events
[ 16.545] (**) Option "Device" "/dev/input/event2"
[ 16.545] (**) Option "_source" "_driver/libinput"
[ 16.545] (II) libinput: A4TECH USB Device Keyboard: is a virtual subdevice
[ 16.545] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:09DA:9066.0001/input/input2/event2"
[ 16.545] (II) XINPUT: Adding extended input device "A4TECH USB Device Keyboard" (type: KEYBOARD, id 12)
[ 16.546] (II) config/udev: removing device Lenovo ThinkPad Compact USB Keyboard with TrackPoint
[ 16.546] (II) UnloadModule: "libinput"
[ 16.546] (II) config/udev: removing device Lenovo ThinkPad Compact USB Keyboard with TrackPoint
[ 16.546] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device removed
[ 16.582] (II) UnloadModule: "libinput"
[ 16.583] (II) config/udev: Adding input device Lenovo ThinkPad Compact USB Keyboard with TrackPoint (/dev/input/event14)
[ 16.583] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "evdev pointer catchall"
[ 16.583] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 16.583] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "libinput pointer catchall"
[ 16.583] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "libinput keyboard catchall"
[ 16.583] (II) Using input driver 'libinput' for 'Lenovo ThinkPad Compact USB Keyboard with TrackPoint'
[ 16.583] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: always reports core events
[ 16.583] (**) Option "Device" "/dev/input/event14"
[ 16.583] (**) Option "_source" "server/udev"
[ 16.585] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is tagged by udev as: Keyboard Mouse Pointingstick
[ 16.586] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is an external pointing stick
[ 16.586] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device is a pointer
[ 16.586] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device is a keyboard
[ 16.586] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device removed
[ 16.609] (II) libinput: Lenovo ThinkPad Compact USB Keyboard with TrackPoint: needs a virtual subdevice
[ 16.609] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:17EF:6047.0004/input/input14/event14"
[ 16.609] (II) XINPUT: Adding extended input device "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" (type: MOUSE, id 11)
[ 16.609] (**) Option "AccelerationScheme" "none"
[ 16.609] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: (accel) selected scheme none/0
[ 16.609] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: (accel) acceleration factor: 2.000
[ 16.609] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: (accel) acceleration threshold: 4
[ 16.611] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is tagged by udev as: Keyboard Mouse Pointingstick
[ 16.612] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is an external pointing stick
[ 16.612] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device is a pointer
[ 16.612] (II) event14 - Lenovo ThinkPad Compact USB Keyboard with TrackPoint: device is a keyboard
[ 16.612] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "evdev pointer catchall"
[ 16.612] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 16.612] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "libinput pointer catchall"
[ 16.612] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: Applying InputClass "libinput keyboard catchall"
[ 16.612] (II) Using input driver 'libinput' for 'Lenovo ThinkPad Compact USB Keyboard with TrackPoint'
[ 16.612] (**) Lenovo ThinkPad Compact USB Keyboard with TrackPoint: always reports core events
[ 16.613] (**) Option "Device" "/dev/input/event14"
[ 16.613] (**) Option "_source" "_driver/libinput"
[ 16.613] (II) libinput: Lenovo ThinkPad Compact USB Keyboard with TrackPoint: is a virtual subdevice
[ 16.613] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:17EF:6047.0004/input/input14/event14"
[ 16.613] (II) XINPUT: Adding extended input device "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" (type: KEYBOARD, id 13)
[ 16.614] (II) config/udev: Adding input device Lenovo ThinkPad Compact USB Keyboard with TrackPoint (/dev/input/mouse1)
[ 16.614] (II) No input driver specified, ignoring this device.
[ 16.614] (II) This device may have been added with another device file.
[ 16.615] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event3)
[ 16.615] (II) No input driver specified, ignoring this device.
[ 16.615] (II) This device may have been added with another device file.
[ 16.615] (II) config/udev: removing device A4TECH USB Device
[ 16.615] (II) event4 - A4TECH USB Device: device removed
[ 16.675] (II) UnloadModule: "libinput"
[ 16.676] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event4)
[ 16.676] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
[ 16.676] (**) A4TECH USB Device: Applying InputClass "libinput pointer catchall"
[ 16.676] (II) Using input driver 'libinput' for 'A4TECH USB Device'
[ 16.676] (**) A4TECH USB Device: always reports core events
[ 16.676] (**) Option "Device" "/dev/input/event4"
[ 16.676] (**) Option "_source" "server/udev"
[ 16.734] (II) event4 - A4TECH USB Device: is tagged by udev as: Mouse
[ 16.734] (II) event4 - A4TECH USB Device: device is a pointer
[ 16.735] (II) event4 - A4TECH USB Device: device removed
[ 16.808] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:09DA:9066.0002/input/input4/event4"
[ 16.809] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 9)
[ 16.809] (**) Option "AccelerationScheme" "none"
[ 16.809] (**) A4TECH USB Device: (accel) selected scheme none/0
[ 16.809] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[ 16.809] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[ 16.867] (II) event4 - A4TECH USB Device: is tagged by udev as: Mouse
[ 16.867] (II) event4 - A4TECH USB Device: device is a pointer
[ 16.869] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 16.869] (II) No input driver specified, ignoring this device.
[ 16.869] (II) This device may have been added with another device file.
[ 16.870] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[ 16.870] (II) No input driver specified, ignoring this device.
[ 16.870] (II) This device may have been added with another device file.
[ 16.870] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event18)
[ 16.870] (II) No input driver specified, ignoring this device.
[ 16.870] (II) This device may have been added with another device file.
[ 16.871] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event22)
[ 16.871] (II) No input driver specified, ignoring this device.
[ 16.871] (II) This device may have been added with another device file.
[ 16.871] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 16.871] (II) No input driver specified, ignoring this device.
[ 16.871] (II) This device may have been added with another device file.
[ 16.872] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event20)
[ 16.872] (II) No input driver specified, ignoring this device.
[ 16.872] (II) This device may have been added with another device file.
[ 16.873] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event19)
[ 16.873] (II) No input driver specified, ignoring this device.
[ 16.873] (II) This device may have been added with another device file.
[ 16.873] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event21)
[ 16.873] (II) No input driver specified, ignoring this device.
[ 16.873] (II) This device may have been added with another device file.
[ 59.883] (EE) event4 - A4TECH USB Device: client bug: event processing lagging behind by 13ms, your system is too slow
[ 60.053] (EE) event4 - A4TECH USB Device: client bug: event processing lagging behind by 23ms, your system is too slow
[ 60.234] (EE) event4 - A4TECH USB Device: client bug: event processing lagging behind by 61ms, your system is too slow
[ 60.615] (EE) event4 - A4TECH USB Device: client bug: event processing lagging behind by 23ms, your system is too slowand my /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 390.144 (tom@los) pon, 18 paź 2021, 14:21:23 CEST
Section "ServerLayout"
# Removed Option "Xinerama" "0"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" 3840 0
Screen 2 "Screen2" 5760 0
Screen 3 "Screen3" 7680 0
Screen 4 "Screen4" 9600 0
Screen 5 "Screen5" 11520 0
Screen 6 "Screen6" RightOf "Screen5"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Idek Iiyama PL2493H"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: unknown, VertRefresh source: unknown
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Idek Iiyama PL2493H"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Unknown"
ModelName "Idek Iiyama PL2493H"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 76.0
EndSection
Section "Monitor"
Identifier "Monitor3"
VendorName "Unknown"
ModelName "Idek Iiyama PL2493H"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 76.0
EndSection
Section "Monitor"
Identifier "Monitor4"
VendorName "Unknown"
ModelName "Idek Iiyama PL2493H"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 76.0
EndSection
Section "Monitor"
Identifier "Monitor5"
VendorName "Unknown"
ModelName "Idek Iiyama PL2493H"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 76.0
EndSection
Section "Monitor"
Identifier "Monitor6"
VendorName "Unknown"
ModelName "Idek Iiyama PL2493H"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 76.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVS 310"
BusID "PCI:4:0:0"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVS 310"
BusID "PCI:3:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVS 310"
BusID "PCI:3:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Device3"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVS 310"
BusID "PCI:5:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device4"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVS 310"
BusID "PCI:5:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Device5"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVS 310"
BusID "PCI:6:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device6"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVS 310"
BusID "PCI:6:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-2"
Option "metamodes" "DP-2: nvidia-auto-select +0+0, DP-3: nvidia-auto-select +1920+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
# Removed Option "metamodes" "DP-2: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
# Removed Option "metamodes" "DP-2: nvidia-auto-select +0+0 {AllowGSYNC=Off}, DP-3: nvidia-auto-select +1920+0"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-2"
Option "metamodes" "DP-2: nvidia-auto-select +0+0 {AllowGSYNC=Off}; DP-2: 1920x1080_75 +0+0; DP-2: 1920x1080_75_0 +0+0; DP-2: 1920x1080_60_0 +0+0; DP-2: 1920x1080_50 +0+0; DP-2: 1680x1050 +0+0; DP-2: 1440x900 +0+0; DP-2: 1280x1024 +0+0; DP-2: 1280x1024_60 +0+0; DP-2: 1280x800 +0+0; DP-2: 1280x720 +0+0; DP-2: 1280x720_60_0 +0+0; DP-2: 1280x720_50 +0+0; DP-2: 1152x864 +0+0; DP-2: 1024x768 +0+0; DP-2: 1024x768_70 +0+0; DP-2: 1024x768_60 +0+0; DP-2: 800x600 +0+0; DP-2: 800x600_60 +0+0; DP-2: 800x600_56 +0+0; DP-2: 720x576 +0+0; DP-2: 720x480 +0+0; DP-2: 640x480 +0+0; DP-2: 640x480_60 +0+0; DP-2: 640x480_60_0 +0+0; DP-2: nvidia-auto-select +0+0 {viewportin=1366x768, viewportout=1920x1079+0+0}"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-3"
Option "metamodes" "DP-3: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "Device3"
Monitor "Monitor3"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-2"
Option "metamodes" "DP-2: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen4"
Device "Device4"
Monitor "Monitor4"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-3"
Option "metamodes" "DP-3: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen5"
Device "Device5"
Monitor "Monitor5"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-2"
Option "metamodes" "DP-2: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen6"
Device "Device6"
Monitor "Monitor6"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DP-3: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSectionThe first 2 monitors are working. There is a black screen on 6 out of 8. You can see the cursor and you can move the windows to black screens. Where did I go wrong?
Last edited by thommen (2021-10-20 12:46:07)
Offline
#2 2021-10-18 15:18:12
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,251
Re: [RESOLVED] Black monitors when Xinerama is turned on
You can see the cursor and you can move the windows to black screens. Where did I go wrong?
Your desktop shell doesn't use them.
1. what is your desktop
2. did you install face-xrandr?
3. what's the output of "xrandr -q"?
Offline
#3 2021-10-18 15:22:47
- thommen
- Member
- From: Poland
- Registered: 2017-12-30
- Posts: 239
Re: [RESOLVED] Black monitors when Xinerama is turned on
1. I have
plasmashell --version && kf5-config --version
plasmashell 5.23.0
Qt: 5.15.2
Szkielety KDE: 5.87.0
kf5-config: 1.02. No
3.
xrandr -q
RandR extension missingbut i have it installed
arandr-0.1.10-6
xorg-xrandr-1.5.1-2Last edited by thommen (2021-10-18 15:29:34)
Offline
#4 2021-10-18 15:28:32
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,251
Re: [RESOLVED] Black monitors when Xinerama is turned on
xinerama conflicts w/ xrandr, which is why you need the fake one.
I guess plasma semi-hard relies on xrandr (a lot of clients do these days) and that's the root of your problems.
That being said: https://github.com/phillipberndt/fakexrandr/issues
Doesn't look like this is gonna be a smooth sailing either…
Edit: without xinerama you're not gonna be able to combine the GPUs, BaseMosaic allows for only 2 GPUs to be combined and 3 outputs total, https://wiki.archlinux.org/title/NVIDIA#Base_Mosaic
Last edited by seth (2021-10-18 15:30:08)
Offline
#5 2021-10-18 15:44:18
- thommen
- Member
- From: Poland
- Registered: 2017-12-30
- Posts: 239
Re: [RESOLVED] Black monitors when Xinerama is turned on
I checked the FakeXRandR solution. This divides the monitor into many. This solution will work for me if Xinerama works. Currently she is not working.
What is the reason I can't turn it on?
As I removed /etc/X11/xorg.conf I have it
xrandr -q
Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 16384 x 16384
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 296mm
1920x1080 60.00*+ 74.97 74.91 59.94 50.00
1680x1050 59.95
1440x900 59.89
1280x1024 75.02 60.02
1280x800 59.81
1280x720 60.00 59.94 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 59.94 59.93
DP-3 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 527mm x 296mm
1920x1080 60.00*+ 74.97 74.91 59.94 50.00
1680x1050 59.95
1440x900 59.89
1280x1024 75.02 60.02
1280x800 59.81
1280x720 60.00 59.94 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 59.94 59.93Offline
#6 2021-10-18 15:50:23
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,251
Re: [RESOLVED] Black monitors when Xinerama is turned on
As I removed /etc/X11/xorg.conf I have it
As formentioned, w/o xinerama you're not gonna be able to use all GPUs let alone outputs. So this is a non-starter.
W/ xinerama you had
You can see the cursor and you can move the windows to black screens.
what means the outputs were active and attached to the server display (because you could move windows around)
The only obstacle is that your DE doesn't play ball and add some desktop windows and panels there (maybe ignores the "dead" area for initial window placement as well) but that's an issue w/ the desktop environment, not X11, and I'm pretty sure that it's because plasma tries to query xrandr for the available outputs. Thus the fakexrandr thing.
Offline
#7 2021-10-18 15:57:24
- thommen
- Member
- From: Poland
- Registered: 2017-12-30
- Posts: 239
Re: [RESOLVED] Black monitors when Xinerama is turned on
seth wrote:
xinerama conflicts w/ xrandr, which is why you need the fake one.
Can you write something more? Can it be fixed? I need a clue
Is this the moment when I am supposed to get used to it that nothing will come of it?
seth wrote:
Thus the fakexrandr thing.
Last edited by thommen (2021-10-18 16:00:14)
Offline
#8 2021-10-18 15:58:24
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,251
Re: [RESOLVED] Black monitors when Xinerama is turned on
The fix is to fake xrandr on top of xinerama…
Offline
#9 2021-10-18 16:03:31
- thommen
- Member
- From: Poland
- Registered: 2017-12-30
- Posts: 239
Re: [RESOLVED] Black monitors when Xinerama is turned on
1. I turned on the xinerama and all 8 monitors
2. I have
sudo fakexrandr-manage
/usr/bin/fakexrandr-manage:37: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
from gi.repository import Gtk, Gdk
/usr/bin/fakexrandr-manage:571: DeprecationWarning: Gtk.ScrolledWindow.add_with_viewport is deprecated
actual_scroller.add_with_viewport(self.scroller_window)
/usr/bin/fakexrandr-manage:573: PyGTKDeprecationWarning: Using positional arguments with the GObject constructor has been deprecated. Please specify keyword(s) for "label" or use a class specific constructor. See: https://wiki.gnome.org/PyGObject/InitializerDeprecations
button = Gtk.Button("Create")
Xlib: extension "RANDR" missing on display ":0".
Traceback (most recent call last):
File "/usr/bin/fakexrandr-manage", line 732, in <module>
perform_action(action)
File "/usr/bin/fakexrandr-manage", line 644, in perform_action
wnd = MainWindow()
File "/usr/bin/fakexrandr-manage", line 622, in __init__
self.load_displays()
File "/usr/bin/fakexrandr-manage", line 517, in load_displays
self._displays = query_xrandr()
File "/usr/bin/fakexrandr-manage", line 144, in query_xrandr
for i in range(screen_resources.contents.ncrtc):
ValueError: NULL pointer accessOffline
#10 2021-10-18 16:10:19
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,251
Re: [RESOLVED] Black monitors when Xinerama is turned on
Don't randomly inject sudo - especially where it's counterproductive…
Offline
#11 2021-10-18 20:46:42
- thommen
- Member
- From: Poland
- Registered: 2017-12-30
- Posts: 239
Re: [RESOLVED] Black monitors when Xinerama is turned on
In this case, I made every attempt (with and without sudo). How can I fix the above errors?
Offline
#12 2021-10-18 21:04:41
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,251
Re: [RESOLVED] Black monitors when Xinerama is turned on
Try to use the CLI version, "fakexrandr-manage help" - the error looks like pygtk complaining about the XRANDR extension not being loaded (yeah, no shit…)
Also what's the output of "ldd /usr/bin/xrandr"? (The fake xrandr library is supposed to shadow the actual one)
Offline
#13 2021-10-18 21:12:13
- thommen
- Member
- From: Poland
- Registered: 2017-12-30
- Posts: 239
Re: [RESOLVED] Black monitors when Xinerama is turned on
seth wrote:
Try to use the CLI version, "fakexrandr-manage help" - the error looks like pygtk complaining about the XRANDR extension not being loaded (yeah, no shit…)
I still have
/usr/bin/fakexrandr-manage:37: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
from gi.repository import Gtk, Gdkseth wrote:
Also what's the output of "ldd /usr/bin/xrandr"? (The fake xrandr library is supposed to shadow the actual one)
I have
ldd /usr/bin/xrandr
linux-vdso.so.1 (0x00007ffda5d49000)
libXrandr.so.2 => /usr/lib/fakexrandr/libXrandr.so.2 (0x00007fc757440000)
libX11.so.6 => /usr/lib/libX11.so.6 (0x00007fc7572ff000)
libm.so.6 => /usr/lib/libm.so.6 (0x00007fc7571bb000)
libc.so.6 => /usr/lib/libc.so.6 (0x00007fc756fef000)
libdl.so.2 => /usr/lib/libdl.so.2 (0x00007fc756fe8000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007fc756fbe000)
/lib64/ld-linux-x86-64.so.2 => /usr/lib64/ld-linux-x86-64.so.2 (0x00007fc75747c000)
libXau.so.6 => /usr/lib/libXau.so.6 (0x00007fc756fb7000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007fc756faf000)Offline
#14 2021-10-18 21:15:23
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,251
Re: [RESOLVED] Black monitors when Xinerama is turned on
libXrandr.so.2 => /usr/lib/fakexrandr/libXrandr.so.2 (0x00007fc757440000)"good"
I still have
That's just a warning and should be irrelevant. Do you get a help message and more importantly, can you configure the fake randr setup with the CLI interface?
Offline
#15 2021-10-18 21:23:31
- thommen
- Member
- From: Poland
- Registered: 2017-12-30
- Posts: 239
Re: [RESOLVED] Black monitors when Xinerama is turned on
seth wrote:
I still have
That's just a warning and should be irrelevant. Do you get a help message and more importantly, can you configure the fake randr setup with the CLI interface?
I have
fakexrandr-manage help
/usr/bin/fakexrandr-manage:37: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
from gi.repository import Gtk, Gdk
fakexrandr manage script
Syntax: fakexrandr-manage <gui|dump-config|show-available|clear-config|
set-config>
Available commands:
gui
Run the GTK based gui
dump-config
Dump the configuration file in a parseable format to the console. Different
configurations are separated by an empty line.
show-available
Query XRandR and show outputs for which a configuration could be created.
clear-config
Remove all stored configurations
set-config
Load configurations from the standard input and merge them into the
configuration file
Configuration format:
The CLI configuration format follows sh syntax and defines the variables NAME,
EDID, WIDTH, HEIGHT and SPLITS. SPLITS is a string describing how an output
shall be split. It starts by one of the letters H, V or N, describing the
kind of split. H means horizontal, V vertical and N no split. Separated by a
space follows the pixel position of the split. Again separated by a space
follow the two sub-configurations of the left/right or top/bottom halves. Any
additional white-space besides a single space is optional any only serves
better readibility. dump-config indents sub-configurations to this end.
If SPLITS equals N, a configuration is discarded upon saving it.Edit
fakexrandr-manage show-available
/usr/bin/fakexrandr-manage:37: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
from gi.repository import Gtk, Gdk
Xlib: extension "RANDR" missing on display ":0".
Traceback (most recent call last):
File "/usr/bin/fakexrandr-manaage", line 732, in <module>
perform_action(action)
File "/usr/bin/fakexrandr-manage", line 664, in perform_action
for name, output in query_xrandr().items():
File "/usr/bin/fakexrandr-manage", line 144, in query_xrandr
for i in range(screen_resources.contents.ncrtc):
ValueError: NULL pointer accessLast edited by thommen (2021-10-18 21:47:22)
Offline
#16 2021-10-19 14:33:31
- thommen
- Member
- From: Poland
- Registered: 2017-12-30
- Posts: 239
Re: [RESOLVED] Black monitors when Xinerama is turned on
seth wrote:
The only obstacle is that your DE doesn't play ball and add some desktop windows and panels there (maybe ignores the "dead" area for initial window placement as well) but that's an issue w/ the desktop environment, not X11, and I'm pretty sure that it's because plasma tries to query xrandr for the available outputs. Thus the fakexrandr thing.
I replaced KDE → XFCE. All 8 monitors have been cheered up. I am currently working on XFCE (it doesn't suit me very well, but I have no choice, I have to work).
Will replacing graphics cards help? Maybe it is worth buying a card with SLI support? Can it give up Nvidia at all? Only in return what to buy?
Offline
#17 2021-10-20 08:07:54
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,251
Re: [RESOLVED] Black monitors when Xinerama is turned on
"Prediction is difficult- particularly when it involves the future."
nvidia got some shade since they seem to no longer provide SLI profiles and that means they *might* give up on the technology.
What to do depends on what you actually want.
If it's only about a lot of displays, you could daisy-chain them via DP on a single GPU.
If you want a super-large monitor, why not "abuse" 1 or 2 4k TVs?
As an addendum:
https://http.download.nvidia.com/XFree86/Linux-x86/325.15/README/xconfigoptions.html wrote:
Option "BaseMosaic" "boolean"
This option can be used to extend a single X screen transparently across display outputs on each GPU. This is like SLI Mosaic mode except that it does not require a video bridge connected to the graphics cards. Due to this Base Mosaic does not guarantee there will be no tearing between the display boundaries. Base Mosaic is supported on SLI configurations up to three display devices. It is also supported on Quadro FX 380, Quadro FX 580 and all non-mobile NVS cards on all available display devices.Use this in conjunction with the MetaModes X configuration option to specify the combination of mode(s) used on each display. nvidia-xconfig can be used to configure Base Mosaic via a command like nvidia-xconfig --base-mosaic --metamodes=METAMODES where the METAMODES string specifies the desired grid configuration. For example, to configure four DFPs in a 2x2 configuration, each running at 1920x1024, with two DFPs connected to two cards, the command would be:
nvidia-xconfig --base-mosaic --metamodes="GPU-0.DFP-0: 1920x1024+0+0, GPU-0.DFP-1: 1920x1024+1920+0, GPU-1.DFP-0: 1920x1024+0+1024, GPU-1.DFP-1: 1920x1024+1920+1024"
Since you do have quadro cards and the wiki says the output limitation only exists for geforce cards, you might want to try your luck w/ BaseMosaic again.
Offline
#18 2021-10-20 10:57:59
- thommen
- Member
- From: Poland
- Registered: 2017-12-30
- Posts: 239
Re: [RESOLVED] Black monitors when Xinerama is turned on
I turned on the "BaseMosaic" mode. It helped in a way, but I have a problem with the settings.
I can't put two rows (4 monitors each). Kscreen has rules of its own and does not recognize /etc/X11/xorg.conf configurations
Well, I have ↓
/etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 390.144 (dvs-builder@U64-P10-09) Wed Jun 2 22:56:57 UTC 2021
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "BaseMosaic" "True"
Option "MetaModes" "GPU-0.DP-2: 1920x1080+0+0 GPU-0.DP-3: 1920x1080+1920+0 GPU-1.DP-2: 1920x1080+3840+0 GPU-1.DP-3: 1920x1080+5760+0 GPU-2.DP-2: 1920x1080+0+2160 GPU-2.DP-3: 1920x1080+1920+2160 GPU-3.DP-2: 1920x1080+3840+2160 GPU-3.DP-3: 1920x1080+5760+2160"
SubSection "Display"
Depth 24
EndSubSection
EndSectionIt makes no difference if I include it in the file ↓
Option "MetaModes" "GPU-0.DP-2: 1920x1080+0+0 GPU-0.DP-3: 1920x1080+1920+0 GPU-1.DP-2: 1920x1080+3840+0 GPU-1.DP-3: 1920x1080+5760+0 GPU-2.DP-2: 1920x1080+0+2160 GPU-2.DP-3: 1920x1080+1920+2160 GPU-3.DP-2: 1920x1080+3840+2160 GPU-3.DP-3: 1920x1080+5760+2160"Well, I try to set my Kscreen settings according to /etc/X11/xorg.conf.
Unfortunately, I do not accept them, I still have one row ↓
.local/share/kscreen/eb07a57d225ff2047d4bffd5dc9a73b0
[
{
"enabled": true,
"id": "bc7874e95352ecce7f741cbd02c0d034",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002201953",
"name": "GPU-0.DP-2"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 0,
"y": 0
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "ced8c556e256b9ca0e371bcc7f23d774",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202525",
"name": "GPU-0.DP-3"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 1920,
"y": 0
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "35c60bcf2ab733b4b840fca43447e6b0",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202354",
"name": "GPU-1.DP-2"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 3840,
"y": 0
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "bbb7b70214eab87dda76fe54c02f45f3",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202477",
"name": "GPU-1.DP-3"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 5760,
"y": 0
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "28aa66d35024a1f790054b9d26b075ad",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202478",
"name": "GPU-2.DP-2"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 3840,
"y": 0
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "d7c7e1bedd0e317f41ae1895fa70d858",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202353",
"name": "GPU-2.DP-3"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 11520,
"y": 0
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "816c7ed783d2ac23de76d3e90315a49d",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202473",
"name": "GPU-3.DP-2"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 5760,
"y": 0
},
"primary": true,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "3987742942b06c27fb0864e2b10f8641",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202513",
"name": "GPU-3.DP-3"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 13440,
"y": 0
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
}
]Why is this happening? Why doesn't Kscreen understand my settings?
I tried to make the correct changes to the file and it didn't help. These are the correct settings that I made directly in the file.
[
{
"enabled": true,
"id": "bc7874e95352ecce7f741cbd02c0d034",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002201953",
"name": "GPU-0.DP-2"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 0,
"y": 0
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "ced8c556e256b9ca0e371bcc7f23d774",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202525",
"name": "GPU-0.DP-3"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 1920,
"y": 0
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "35c60bcf2ab733b4b840fca43447e6b0",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202354",
"name": "GPU-1.DP-2"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 3840,
"y": 0
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "bbb7b70214eab87dda76fe54c02f45f3",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202477",
"name": "GPU-1.DP-3"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 5760,
"y": 0
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "28aa66d35024a1f790054b9d26b075ad",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202478",
"name": "GPU-2.DP-2"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 0,
"y": 2160
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "d7c7e1bedd0e317f41ae1895fa70d858",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202353",
"name": "GPU-2.DP-3"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 1920,
"y": 2160
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "816c7ed783d2ac23de76d3e90315a49d",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202473",
"name": "GPU-3.DP-2"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 3840,
"y": 2160
},
"primary": true,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
},
{
"enabled": true,
"id": "3987742942b06c27fb0864e2b10f8641",
"metadata": {
"fullname": "xrandr-Iiyama North America-PL2493H-1175002202513",
"name": "GPU-3.DP-3"
},
"mode": {
"refresh": 60,
"size": {
"height": 1080,
"width": 1920
}
},
"overscan": 0,
"pos": {
"x": 5760,
"y": 2160
},
"primary": false,
"rgbrange": 0,
"rotation": 1,
"scale": 1,
"vrrpolicy": 2
}
]I tried to find out my settings from the KDE panel in Kscreen. It didn't help either. If I could have two rows, the problem would be solved. How can this be done?
Offline
#19 2021-10-20 11:16:27
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,300
Re: [RESOLVED] Black monitors when Xinerama is turned on
If your xorg.conf works in theory you could also just disable kscreen, no? You can disable the kscreen daemon in
kcmshell5 kcmkdedwhich should make things honor your xorg.conf (... not sure whether there'd be invalid assumptions on KWins side in that case, but for keeping a specific monitor config you should be able to try and disable that)
Offline
#20 2021-10-20 12:45:31
- thommen
- Member
- From: Poland
- Registered: 2017-12-30
- Posts: 239
Re: [RESOLVED] Black monitors when Xinerama is turned on
V1del wrote:
If your xorg.conf works in theory you could also just disable kscreen, no? You can disable the kscreen daemon in
kcmshell5 kcmkdedwhich should make things honor your xorg.conf (... not sure whether there'd be invalid assumptions on KWins side in that case, but for keeping a specific monitor config you should be able to try and disable that)
Saw the post → https://forum.kde.org/viewtopic.php?f=6 … 59#p418608. I did that too, but for me it left only 1 monitor turned on, so.. ↓
@seth I want to thank you for your help, for your time. I helped me with this post
seth wrote:
"Prediction is difficult- particularly when it involves the future."
nvidia got some shade since they seem to no longer provide SLI profiles and that means they *might* give up on the technology.What to do depends on what you actually want.
If it's only about a lot of displays, you could daisy-chain them via DP on a single GPU.
If you want a super-large monitor, why not "abuse" 1 or 2 4k TVs?As an addendum:
https://http.download.nvidia.com/XFree86/Linux-x86/325.15/README/xconfigoptions.html wrote:Option "BaseMosaic" "boolean"
This option can be used to extend a single X screen transparently across display outputs on each GPU. This is like SLI Mosaic mode except that it does not require a video bridge connected to the graphics cards. Due to this Base Mosaic does not guarantee there will be no tearing between the display boundaries. Base Mosaic is supported on SLI configurations up to three display devices. It is also supported on Quadro FX 380, Quadro FX 580 and all non-mobile NVS cards on all available display devices.Use this in conjunction with the MetaModes X configuration option to specify the combination of mode(s) used on each display. nvidia-xconfig can be used to configure Base Mosaic via a command like nvidia-xconfig --base-mosaic --metamodes=METAMODES where the METAMODES string specifies the desired grid configuration. For example, to configure four DFPs in a 2x2 configuration, each running at 1920x1024, with two DFPs connected to two cards, the command would be:
nvidia-xconfig --base-mosaic --metamodes="GPU-0.DFP-0: 1920x1024+0+0, GPU-0.DFP-1: 1920x1024+1920+0, GPU-1.DFP-0: 1920x1024+0+1024, GPU-1.DFP-1: 1920x1024+1920+1024"
Since you do have quadro cards and the wiki says the output limitation only exists for geforce cards, you might want to try your luck w/ BaseMosaic again.
On nVidia, I turned on "Base Mosaic". I insisted and endlessly set up the ".local/share/kscreen/eb07a57d225ff2047d4bffd5dc9a73b0" file until Screen finally understood my configuration.
@seth thank you for taking me by the hand and leading me through this difficult journey <3
Offline