Arch Linux

cdwijs

Member

Registered: 2010-04-24

Posts: 289

updated BIOS: system immediately resumes from suspend (Gigabyte B550)

Hi All,

I have updated the BIOS of my PC. With the new BIOS (mb_bios_b550-aorus-pro-ac_f14e.zip), the PC does not suspend correctly anymore. It does all the steps of suspending, but then directly wakes itself up again.
What can I check to debug this further?

My mainboard: https://www.gigabyte.com/Motherboard/B5 … rt-dl-bios
My processor: AMD Ryzen 5 5600X 6-Core Processor

# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Starship/Matisse IOMMU
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge
00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge
00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:05.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B]
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B]
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 61)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 7
01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO
05:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] Device 43ee
05:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] Device 43eb
05:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43e9
06:08.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43ea
06:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43ea
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)
08:00.0 Network controller: Intel Corporation Wireless-AC 9260 (rev 29)
09:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Lexa PRO [Radeon 540/540X/550/550X / RX 540X/550/550X] (rev c7)
09:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X]
0a:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Function
0b:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP
0b:00.1 Encryption controller: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Cryptographic Coprocessor PSPCPP
0b:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller
0b:00.4 Audio device: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller

Dmesg with the new BIOS (mb_bios_b550-aorus-pro-ac_f14e.zip)

# dmesg 
[    0.000000] Linux version 5.15.2-arch1-1 (linux@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Fri, 12 Nov 2021 19:22:10 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8b90b3e6-d80e-445d-adf5-cc65a591b835 rw rootflags=subvol=root loglevel=3 quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 3376
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c3efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c3f000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20e000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000ba036fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba037000-0x00000000bca46fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bca47000-0x00000000bca8efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bca8f000-0x00000000bd170fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd171000-0x00000000bddfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000083f380000-0x000000083fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 AORUS PRO AC/B550 AORUS PRO AC, BIOS F14e 10/14/2021
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3693.171 MHz processor
[    0.000312] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000314] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000318] last_pfn = 0x83f380 max_arch_pfn = 0x400000000
[    0.001216] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001459] total RAM covered: 3071M
[    0.001532] Found optimal setting for mtrr clean up
[    0.001533]  gran_size: 64K 	chunk_size: 64M 	num_reg: 3  	lose cover RAM: 0G
[    0.001622] e820: update [mem 0xbcc00000-0xbcc0ffff] usable ==> reserved
[    0.001627] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.001630] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.004111] Using GB pages for direct mapping
[    0.004544] RAMDISK: [mem 0x36fe9000-0x377ebfff]
[    0.004547] ACPI: Early table checksum verification disabled
[    0.004550] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.004552] ACPI: XSDT 0x00000000BD159728 0000DC (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004556] ACPI: FACP 0x00000000BCA76000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.004560] ACPI: DSDT 0x00000000BCA53000 0067B6 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.004561] ACPI: FACS 0x00000000BD154000 000040
[    0.004563] ACPI: SSDT 0x00000000BCA85000 009A38 (v02 GBT    GSWApp   00000001 INTL 20190509)
[    0.004565] ACPI: SSDT 0x00000000BCA7C000 008C98 (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.004566] ACPI: SSDT 0x00000000BCA78000 003D06 (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.004568] ACPI: SSDT 0x00000000BCA77000 0001AD (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.004569] ACPI: FIDT 0x00000000BCA6F000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004570] ACPI: MCFG 0x00000000BCA6E000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.004572] ACPI: HPET 0x00000000BCA6D000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.004573] ACPI: IVRS 0x00000000BCA6C000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.004575] ACPI: TPM2 0x00000000BCA6A000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.004576] ACPI: PCCT 0x00000000BCA69000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.004578] ACPI: SSDT 0x00000000BCA66000 002FDD (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.004579] ACPI: CRAT 0x00000000BCA65000 000B18 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.004580] ACPI: CDIT 0x00000000BCA64000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.004582] ACPI: SSDT 0x00000000BCA63000 000625 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.004583] ACPI: SSDT 0x00000000BCA61000 0014FD (v01 AMD    ArticTPX 00000001 INTL 20190509)
[    0.004585] ACPI: SSDT 0x00000000BCA60000 000788 (v01 AMD    ArticNOI 00000001 INTL 20190509)
[    0.004586] ACPI: SSDT 0x00000000BCA5C000 003A59 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.004587] ACPI: WSMT 0x00000000BCA5B000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004589] ACPI: APIC 0x00000000BCA5A000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.004590] ACPI: SSDT 0x00000000BCA74000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.004592] ACPI: SSDT 0x00000000BCA73000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.004593] ACPI: FPDT 0x00000000BCA72000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004594] ACPI: Reserving FACP table memory at [mem 0xbca76000-0xbca76113]
[    0.004595] ACPI: Reserving DSDT table memory at [mem 0xbca53000-0xbca597b5]
[    0.004596] ACPI: Reserving FACS table memory at [mem 0xbd154000-0xbd15403f]
[    0.004596] ACPI: Reserving SSDT table memory at [mem 0xbca85000-0xbca8ea37]
[    0.004596] ACPI: Reserving SSDT table memory at [mem 0xbca7c000-0xbca84c97]
[    0.004597] ACPI: Reserving SSDT table memory at [mem 0xbca78000-0xbca7bd05]
[    0.004597] ACPI: Reserving SSDT table memory at [mem 0xbca77000-0xbca771ac]
[    0.004598] ACPI: Reserving FIDT table memory at [mem 0xbca6f000-0xbca6f09b]
[    0.004598] ACPI: Reserving MCFG table memory at [mem 0xbca6e000-0xbca6e03b]
[    0.004599] ACPI: Reserving HPET table memory at [mem 0xbca6d000-0xbca6d037]
[    0.004599] ACPI: Reserving IVRS table memory at [mem 0xbca6c000-0xbca6c0cf]
[    0.004599] ACPI: Reserving TPM2 table memory at [mem 0xbca6a000-0xbca6a04b]
[    0.004600] ACPI: Reserving PCCT table memory at [mem 0xbca69000-0xbca6906d]
[    0.004600] ACPI: Reserving SSDT table memory at [mem 0xbca66000-0xbca68fdc]
[    0.004601] ACPI: Reserving CRAT table memory at [mem 0xbca65000-0xbca65b17]
[    0.004601] ACPI: Reserving CDIT table memory at [mem 0xbca64000-0xbca64028]
[    0.004602] ACPI: Reserving SSDT table memory at [mem 0xbca63000-0xbca63624]
[    0.004602] ACPI: Reserving SSDT table memory at [mem 0xbca61000-0xbca624fc]
[    0.004602] ACPI: Reserving SSDT table memory at [mem 0xbca60000-0xbca60787]
[    0.004603] ACPI: Reserving SSDT table memory at [mem 0xbca5c000-0xbca5fa58]
[    0.004603] ACPI: Reserving WSMT table memory at [mem 0xbca5b000-0xbca5b027]
[    0.004604] ACPI: Reserving APIC table memory at [mem 0xbca5a000-0xbca5a15d]
[    0.004604] ACPI: Reserving SSDT table memory at [mem 0xbca74000-0xbca7547e]
[    0.004605] ACPI: Reserving SSDT table memory at [mem 0xbca73000-0xbca730be]
[    0.004605] ACPI: Reserving FPDT table memory at [mem 0xbca72000-0xbca72043]
[    0.004649] No NUMA configuration found
[    0.004650] Faking a node at [mem 0x0000000000000000-0x000000083f37ffff]
[    0.004652] NODE_DATA(0) allocated [mem 0x83f37c000-0x83f37ffff]
[    0.004677] Zone ranges:
[    0.004677]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.004678]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.004679]   Normal   [mem 0x0000000100000000-0x000000083f37ffff]
[    0.004680]   Device   empty
[    0.004680] Movable zone start for each node
[    0.004681] Early memory node ranges
[    0.004681]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.004682]   node   0: [mem 0x0000000000100000-0x0000000009c3efff]
[    0.004682]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.004683]   node   0: [mem 0x000000000a20e000-0x000000000affffff]
[    0.004683]   node   0: [mem 0x000000000b020000-0x00000000ba036fff]
[    0.004684]   node   0: [mem 0x00000000bddff000-0x00000000beffffff]
[    0.004684]   node   0: [mem 0x0000000100000000-0x000000083f37ffff]
[    0.004686] Initmem setup node 0 [mem 0x0000000000001000-0x000000083f37ffff]
[    0.004688] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.004699] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.004783] On node 0, zone DMA32: 961 pages in unavailable ranges
[    0.004792] On node 0, zone DMA32: 14 pages in unavailable ranges
[    0.006962] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.007061] On node 0, zone DMA32: 15816 pages in unavailable ranges
[    0.042426] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.042444] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.042835] ACPI: PM-Timer IO Port: 0x808
[    0.042841] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.042853] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.042858] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.042859] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.042861] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.042863] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.042864] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.042867] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[    0.042885] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.042886] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.042886] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.042887] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.042887] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.042888] PM: hibernation: Registered nosave memory: [mem 0x09c3f000-0x09ffffff]
[    0.042889] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20dfff]
[    0.042890] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.042891] PM: hibernation: Registered nosave memory: [mem 0xba037000-0xbca46fff]
[    0.042891] PM: hibernation: Registered nosave memory: [mem 0xbca47000-0xbca8efff]
[    0.042892] PM: hibernation: Registered nosave memory: [mem 0xbca8f000-0xbd170fff]
[    0.042892] PM: hibernation: Registered nosave memory: [mem 0xbd171000-0xbddfefff]
[    0.042893] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.042893] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.042893] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.042894] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
[    0.042894] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[    0.042894] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff]
[    0.042895] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd7fffff]
[    0.042895] PM: hibernation: Registered nosave memory: [mem 0xfd800000-0xfe9fffff]
[    0.042895] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.042896] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.042896] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.042896] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.042897] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.042897] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.042897] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.042898] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.042898] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.042898] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.042899] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.042899] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.042899] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.042900] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.042900] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.042900] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.042901] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.042901] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.042901] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.042902] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.042903] Booting paravirtualized kernel on bare hardware
[    0.042905] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.045396] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1
[    0.046301] percpu: Embedded 53 pages/cpu s180224 r8192 d28672 u262144
[    0.046307] pcpu-alloc: s180224 r8192 d28672 u262144 alloc=1*2097152
[    0.046309] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.046313] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
[    0.046336] Built 1 zonelists, mobility grouping on.  Total pages: 8233537
[    0.046337] Policy zone: Normal
[    0.046338] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8b90b3e6-d80e-445d-adf5-cc65a591b835 rw rootflags=subvol=root loglevel=3 quiet
[    0.046372] Unknown command line parameters: BOOT_IMAGE=/vmlinuz-linux
[    0.046373] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.046374] printk: log_buf_len total cpu_extra contributions: 126976 bytes
[    0.046374] printk: log_buf_len min size: 131072 bytes
[    0.046499] printk: log_buf_len: 262144 bytes
[    0.046500] printk: early log buf free: 116240(88%)
[    0.048471] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.049459] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.049637] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[    0.101582] Memory: 32757616K/33457556K available (14344K kernel code, 2070K rwdata, 10772K rodata, 1832K init, 3876K bss, 699680K reserved, 0K cma-reserved)
[    0.101586] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0
[    0.101666] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.101673] ftrace: allocating 44240 entries in 173 pages
[    0.112516] ftrace: allocated 173 pages with 5 groups
[    0.112613] rcu: Preemptible hierarchical RCU implementation.
[    0.112614] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.112614] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
[    0.112615] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.112616] 	Trampoline variant of Tasks RCU enabled.
[    0.112616] 	Rude variant of Tasks RCU enabled.
[    0.112616] 	Tracing variant of Tasks RCU enabled.
[    0.112617] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.112617] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.114412] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
[    0.114641] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.114741] spurious 8259A interrupt: IRQ7.
[    0.114752] Console: colour dummy device 80x25
[    0.114758] printk: console [tty0] enabled
[    0.114774] ACPI: Core revision 20210730
[    0.114881] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.114896] APIC: Switch to symmetric I/O mode setup
[    0.435006] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.435020] Switched APIC routing to physical flat.
[    0.435644] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.451552] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6a7843dc0af, max_idle_ns: 881590592836 ns
[    0.451555] Calibrating delay loop (skipped), value calculated using timer frequency.. 7389.10 BogoMIPS (lpj=12310570)
[    0.451557] pid_max: default: 32768 minimum: 301
[    0.451573] LSM: Security Framework initializing
[    0.451578] landlock: Up and running.
[    0.451579] Yama: becoming mindful.
[    0.451582] LSM support for eBPF active
[    0.451620] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.451659] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.451821] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.451865] LVT offset 1 assigned for vector 0xf9
[    0.452019] LVT offset 2 assigned for vector 0xf4
[    0.452061] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[    0.452062] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.452064] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.452065] Spectre V2 : Mitigation: Full AMD retpoline
[    0.452065] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.452066] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.452066] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.452067] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.452068] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.454014] Freeing SMP alternatives memory: 36K
[    0.564246] smpboot: CPU0: AMD Ryzen 5 5600X 6-Core Processor (family: 0x19, model: 0x21, stepping: 0x0)
[    0.564326] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.564329] ... version:                0
[    0.564330] ... bit width:              48
[    0.564330] ... generic registers:      6
[    0.564330] ... value mask:             0000ffffffffffff
[    0.564331] ... max period:             00007fffffffffff
[    0.564331] ... fixed-purpose events:   0
[    0.564331] ... event mask:             000000000000003f
[    0.564368] rcu: Hierarchical SRCU implementation.
[    0.564608] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.564743] smp: Bringing up secondary CPUs ...
[    0.564801] x86: Booting SMP configuration:
[    0.564802] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6
[    0.574935] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.574973]   #7  #8  #9 #10 #11
[    0.587038] smp: Brought up 1 node, 12 CPUs
[    0.587038] smpboot: Max logical packages: 3
[    0.587038] smpboot: Total of 12 processors activated (88671.27 BogoMIPS)
[    0.588528] devtmpfs: initialized
[    0.588528] x86/mm: Memory block size: 128MB
[    0.588993] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20dfff] (57344 bytes)
[    0.588993] ACPI: PM: Registering ACPI NVS region [mem 0xbca8f000-0xbd170fff] (7217152 bytes)
[    0.588993] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.588993] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.588993] pinctrl core: initialized pinctrl subsystem
[    0.588993] PM: RTC time: 17:03:56, date: 2021-11-16
[    0.588993] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.588993] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.588993] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.589047] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.589052] audit: initializing netlink subsys (disabled)
[    0.589056] audit: type=2000 audit(1637082235.156:1): state=initialized audit_enabled=0 res=1
[    0.589056] thermal_sys: Registered thermal governor 'fair_share'
[    0.589056] thermal_sys: Registered thermal governor 'bang_bang'
[    0.589056] thermal_sys: Registered thermal governor 'step_wise'
[    0.589056] thermal_sys: Registered thermal governor 'user_space'
[    0.589056] thermal_sys: Registered thermal governor 'power_allocator'
[    0.589056] cpuidle: using governor ladder
[    0.589056] cpuidle: using governor menu
[    0.589056] Detected 1 PCC Subspaces
[    0.589056] Registering PCC driver as Mailbox controller
[    0.589056] HugeTLB: can free 4094 vmemmap pages for hugepages-1048576kB
[    0.589056] ACPI: bus type PCI registered
[    0.589056] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.589056] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.589056] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.589056] PCI: Using configuration type 1 for base access
[    0.591654] Kprobes globally optimized
[    0.591657] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[    0.591657] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.591657] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.591657] ACPI: Added _OSI(Module Device)
[    0.591657] ACPI: Added _OSI(Processor Device)
[    0.591657] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.591657] ACPI: Added _OSI(Processor Aggregator Device)
[    0.591657] ACPI: Added _OSI(Linux-Dell-Video)
[    0.591657] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.591657] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.602365] ACPI: 12 ACPI AML tables successfully acquired and loaded
[    0.603363] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.610665] ACPI: Interpreter enabled
[    0.610675] ACPI: PM: (supports S0 S3 S4 S5)
[    0.610676] ACPI: Using IOAPIC for interrupt routing
[    0.610874] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.611153] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.616600] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.616603] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.616748] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.616754] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.616980] PCI host bridge to bus 0000:00
[    0.616981] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.616982] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.616983] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.616983] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.616984] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.616985] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.616985] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.616986] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.616986] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.617032] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[    0.617137] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
[    0.617230] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[    0.617333] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
[    0.617406] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.617525] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
[    0.617551] pci 0000:00:01.2: enabling Extended Tags
[    0.617598] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.617694] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[    0.617778] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[    0.617878] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[    0.617949] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.618317] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[    0.618403] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[    0.618486] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[    0.618586] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[    0.618611] pci 0000:00:07.1: enabling Extended Tags
[    0.618650] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.618738] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[    0.618839] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[    0.618864] pci 0000:00:08.1: enabling Extended Tags
[    0.618907] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.619029] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.619156] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.619272] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[    0.619327] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[    0.619382] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[    0.619439] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[    0.619495] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[    0.619551] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[    0.619607] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[    0.619662] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[    0.619751] pci 0000:01:00.0: [144d:a80a] type 00 class 0x010802
[    0.619768] pci 0000:01:00.0: reg 0x10: [mem 0xfcea0000-0xfcea3fff 64bit]
[    0.619962] pci 0000:00:01.1: PCI bridge to [bus 01-04]
[    0.619965] pci 0000:00:01.1:   bridge window [io  0xf000-0xffff]
[    0.619967] pci 0000:00:01.1:   bridge window [mem 0xfcd00000-0xfcefffff]
[    0.620023] pci 0000:05:00.0: [1022:43ee] type 00 class 0x0c0330
[    0.620042] pci 0000:05:00.0: reg 0x10: [mem 0xfcca0000-0xfcca7fff 64bit]
[    0.620085] pci 0000:05:00.0: enabling Extended Tags
[    0.620141] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.620230] pci 0000:05:00.1: [1022:43eb] type 00 class 0x010601
[    0.620280] pci 0000:05:00.1: reg 0x24: [mem 0xfcc80000-0xfcc9ffff]
[    0.620288] pci 0000:05:00.1: reg 0x30: [mem 0xfcc00000-0xfcc7ffff pref]
[    0.620295] pci 0000:05:00.1: enabling Extended Tags
[    0.620340] pci 0000:05:00.1: PME# supported from D3hot D3cold
[    0.620405] pci 0000:05:00.2: [1022:43e9] type 01 class 0x060400
[    0.620452] pci 0000:05:00.2: enabling Extended Tags
[    0.620502] pci 0000:05:00.2: PME# supported from D3hot D3cold
[    0.620562] pci 0000:00:01.2: PCI bridge to [bus 05-08]
[    0.620565] pci 0000:00:01.2:   bridge window [io  0xe000-0xefff]
[    0.620567] pci 0000:00:01.2:   bridge window [mem 0xfca00000-0xfccfffff]
[    0.620675] pci 0000:06:08.0: [1022:43ea] type 01 class 0x060400
[    0.620725] pci 0000:06:08.0: enabling Extended Tags
[    0.620781] pci 0000:06:08.0: PME# supported from D3hot D3cold
[    0.620872] pci 0000:06:09.0: [1022:43ea] type 01 class 0x060400
[    0.620922] pci 0000:06:09.0: enabling Extended Tags
[    0.620978] pci 0000:06:09.0: PME# supported from D3hot D3cold
[    0.621060] pci 0000:05:00.2: PCI bridge to [bus 06-08]
[    0.621065] pci 0000:05:00.2:   bridge window [io  0xe000-0xefff]
[    0.621068] pci 0000:05:00.2:   bridge window [mem 0xfca00000-0xfcbfffff]
[    0.621170] pci 0000:07:00.0: [10ec:8125] type 00 class 0x020000
[    0.621195] pci 0000:07:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.621228] pci 0000:07:00.0: reg 0x18: [mem 0xfcb00000-0xfcb0ffff 64bit]
[    0.621249] pci 0000:07:00.0: reg 0x20: [mem 0xfcb10000-0xfcb13fff 64bit]
[    0.621403] pci 0000:07:00.0: supports D1 D2
[    0.621404] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.621577] pci 0000:06:08.0: PCI bridge to [bus 07]
[    0.621582] pci 0000:06:08.0:   bridge window [io  0xe000-0xefff]
[    0.621585] pci 0000:06:08.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.621658] pci 0000:08:00.0: [8086:2526] type 00 class 0x028000
[    0.621693] pci 0000:08:00.0: reg 0x10: [mem 0xfca00000-0xfca03fff 64bit]
[    0.621880] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    0.622017] pci 0000:06:09.0: PCI bridge to [bus 08]
[    0.622024] pci 0000:06:09.0:   bridge window [mem 0xfca00000-0xfcafffff]
[    0.622103] pci 0000:09:00.0: [1002:699f] type 00 class 0x030000
[    0.622120] pci 0000:09:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.622131] pci 0000:09:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.622138] pci 0000:09:00.0: reg 0x20: [io  0xd000-0xd0ff]
[    0.622146] pci 0000:09:00.0: reg 0x24: [mem 0xfcf00000-0xfcf3ffff]
[    0.622153] pci 0000:09:00.0: reg 0x30: [mem 0xfcf40000-0xfcf5ffff pref]
[    0.622239] pci 0000:09:00.0: supports D1 D2
[    0.622239] pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.622355] pci 0000:09:00.1: [1002:aae0] type 00 class 0x040300
[    0.622371] pci 0000:09:00.1: reg 0x10: [mem 0xfcf60000-0xfcf63fff 64bit]
[    0.622464] pci 0000:09:00.1: supports D1 D2
[    0.622544] pci 0000:00:03.1: PCI bridge to [bus 09]
[    0.622546] pci 0000:00:03.1:   bridge window [io  0xd000-0xdfff]
[    0.622548] pci 0000:00:03.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.622551] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.622589] pci 0000:0a:00.0: [1022:148a] type 00 class 0x130000
[    0.622626] pci 0000:0a:00.0: enabling Extended Tags
[    0.622728] pci 0000:00:07.1: PCI bridge to [bus 0a]
[    0.622782] pci 0000:0b:00.0: [1022:1485] type 00 class 0x130000
[    0.622826] pci 0000:0b:00.0: enabling Extended Tags
[    0.622942] pci 0000:0b:00.1: [1022:1486] type 00 class 0x108000
[    0.622962] pci 0000:0b:00.1: reg 0x18: [mem 0xfc800000-0xfc8fffff]
[    0.622978] pci 0000:0b:00.1: reg 0x24: [mem 0xfc908000-0xfc909fff]
[    0.622988] pci 0000:0b:00.1: enabling Extended Tags
[    0.623093] pci 0000:0b:00.3: [1022:149c] type 00 class 0x0c0330
[    0.623106] pci 0000:0b:00.3: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit]
[    0.623136] pci 0000:0b:00.3: enabling Extended Tags
[    0.623182] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
[    0.623253] pci 0000:0b:00.4: [1022:1487] type 00 class 0x040300
[    0.623263] pci 0000:0b:00.4: reg 0x10: [mem 0xfc900000-0xfc907fff]
[    0.623298] pci 0000:0b:00.4: enabling Extended Tags
[    0.623341] pci 0000:0b:00.4: PME# supported from D0 D3hot D3cold
[    0.623411] pci 0000:00:08.1: PCI bridge to [bus 0b]
[    0.623415] pci 0000:00:08.1:   bridge window [mem 0xfc700000-0xfc9fffff]
[    0.623600] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.623638] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.623669] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.623707] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.623741] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.623769] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.623796] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.623824] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.624320] iommu: Default domain type: Translated 
[    0.624321] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.624327] pci 0000:09:00.0: vgaarb: setting as boot VGA device
[    0.624327] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.624327] pci 0000:09:00.0: vgaarb: bridge control possible
[    0.624327] vgaarb: loaded
[    0.624327] SCSI subsystem initialized
[    0.624327] libata version 3.00 loaded.
[    0.624327] ACPI: bus type USB registered
[    0.624327] usbcore: registered new interface driver usbfs
[    0.624327] usbcore: registered new interface driver hub
[    0.624327] usbcore: registered new device driver usb
[    0.624327] pps_core: LinuxPPS API ver. 1 registered
[    0.624327] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.624327] PTP clock support registered
[    0.624327] EDAC MC: Ver: 3.0.0
[    0.624327] NetLabel: Initializing
[    0.624327] NetLabel:  domain hash size = 128
[    0.624327] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.624327] NetLabel:  unlabeled traffic allowed by default
[    0.624327] PCI: Using ACPI for IRQ routing
[    0.628603] PCI: pci_cache_line_size set to 64 bytes
[    0.628663] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.628665] e820: reserve RAM buffer [mem 0x09c3f000-0x0bffffff]
[    0.628665] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.628666] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.628666] e820: reserve RAM buffer [mem 0xba037000-0xbbffffff]
[    0.628667] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.628667] e820: reserve RAM buffer [mem 0x83f380000-0x83fffffff]
[    0.628670] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.628670] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.630283] clocksource: Switched to clocksource tsc-early
[    0.632673] VFS: Disk quotas dquot_6.6.0
[    0.632682] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.632718] pnp: PnP ACPI init
[    0.632769] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.632805] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
[    0.632922] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.632923] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.632924] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.632925] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.633062] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.633063] system 00:04: [io  0x040b] has been reserved
[    0.633064] system 00:04: [io  0x04d6] has been reserved
[    0.633065] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.633065] system 00:04: [io  0x0c14] has been reserved
[    0.633066] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.633066] system 00:04: [io  0x0c52] has been reserved
[    0.633067] system 00:04: [io  0x0c6c] has been reserved
[    0.633067] system 00:04: [io  0x0c6f] has been reserved
[    0.633068] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.633069] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.633069] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.633070] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.633070] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.633071] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.633072] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.633073] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.633074] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.633075] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.633075] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.633076] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.633077] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.633448] pnp: PnP ACPI: found 5 devices
[    0.638557] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.638590] NET: Registered PF_INET protocol family
[    0.638730] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.639573] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.639727] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.639904] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.639953] TCP: Hash tables configured (established 262144 bind 65536)
[    0.640057] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.640115] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.640175] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.640236] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.640240] NET: Registered PF_XDP protocol family
[    0.640246] pci 0000:00:01.1: PCI bridge to [bus 01-04]
[    0.640248] pci 0000:00:01.1:   bridge window [io  0xf000-0xffff]
[    0.640251] pci 0000:00:01.1:   bridge window [mem 0xfcd00000-0xfcefffff]
[    0.640255] pci 0000:06:08.0: PCI bridge to [bus 07]
[    0.640257] pci 0000:06:08.0:   bridge window [io  0xe000-0xefff]
[    0.640261] pci 0000:06:08.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.640268] pci 0000:06:09.0: PCI bridge to [bus 08]
[    0.640272] pci 0000:06:09.0:   bridge window [mem 0xfca00000-0xfcafffff]
[    0.640279] pci 0000:05:00.2: PCI bridge to [bus 06-08]
[    0.640280] pci 0000:05:00.2:   bridge window [io  0xe000-0xefff]
[    0.640284] pci 0000:05:00.2:   bridge window [mem 0xfca00000-0xfcbfffff]
[    0.640291] pci 0000:00:01.2: PCI bridge to [bus 05-08]
[    0.640292] pci 0000:00:01.2:   bridge window [io  0xe000-0xefff]
[    0.640294] pci 0000:00:01.2:   bridge window [mem 0xfca00000-0xfccfffff]
[    0.640298] pci 0000:00:03.1: PCI bridge to [bus 09]
[    0.640299] pci 0000:00:03.1:   bridge window [io  0xd000-0xdfff]
[    0.640302] pci 0000:00:03.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.640303] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.640306] pci 0000:00:07.1: PCI bridge to [bus 0a]
[    0.640312] pci 0000:00:08.1: PCI bridge to [bus 0b]
[    0.640315] pci 0000:00:08.1:   bridge window [mem 0xfc700000-0xfc9fffff]
[    0.640319] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.640320] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.640320] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.640321] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.640321] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.640322] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.640323] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfec2ffff window]
[    0.640323] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.640324] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.640324] pci_bus 0000:01: resource 1 [mem 0xfcd00000-0xfcefffff]
[    0.640325] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.640325] pci_bus 0000:05: resource 1 [mem 0xfca00000-0xfccfffff]
[    0.640326] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
[    0.640326] pci_bus 0000:06: resource 1 [mem 0xfca00000-0xfcbfffff]
[    0.640327] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
[    0.640327] pci_bus 0000:07: resource 1 [mem 0xfcb00000-0xfcbfffff]
[    0.640328] pci_bus 0000:08: resource 1 [mem 0xfca00000-0xfcafffff]
[    0.640328] pci_bus 0000:09: resource 0 [io  0xd000-0xdfff]
[    0.640329] pci_bus 0000:09: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.640329] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.640330] pci_bus 0000:0b: resource 1 [mem 0xfc700000-0xfc9fffff]
[    0.640466] pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.640476] pci 0000:09:00.1: D0 power state depends on 0000:09:00.0
[    0.640598] PCI: CLS 64 bytes, default 64
[    0.640603] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.640623] pci 0000:00:01.0: Adding to iommu group 0
[    0.640628] Trying to unpack rootfs image as initramfs...
[    0.640628] pci 0000:00:01.1: Adding to iommu group 1
[    0.640633] pci 0000:00:01.2: Adding to iommu group 2
[    0.640638] pci 0000:00:02.0: Adding to iommu group 3
[    0.640644] pci 0000:00:03.0: Adding to iommu group 4
[    0.640648] pci 0000:00:03.1: Adding to iommu group 5
[    0.640653] pci 0000:00:04.0: Adding to iommu group 6
[    0.640658] pci 0000:00:05.0: Adding to iommu group 7
[    0.640664] pci 0000:00:07.0: Adding to iommu group 8
[    0.640669] pci 0000:00:07.1: Adding to iommu group 9
[    0.640674] pci 0000:00:08.0: Adding to iommu group 10
[    0.640679] pci 0000:00:08.1: Adding to iommu group 11
[    0.640685] pci 0000:00:14.0: Adding to iommu group 12
[    0.640688] pci 0000:00:14.3: Adding to iommu group 12
[    0.640703] pci 0000:00:18.0: Adding to iommu group 13
[    0.640706] pci 0000:00:18.1: Adding to iommu group 13
[    0.640710] pci 0000:00:18.2: Adding to iommu group 13
[    0.640713] pci 0000:00:18.3: Adding to iommu group 13
[    0.640717] pci 0000:00:18.4: Adding to iommu group 13
[    0.640720] pci 0000:00:18.5: Adding to iommu group 13
[    0.640724] pci 0000:00:18.6: Adding to iommu group 13
[    0.640727] pci 0000:00:18.7: Adding to iommu group 13
[    0.640732] pci 0000:01:00.0: Adding to iommu group 14
[    0.640741] pci 0000:05:00.0: Adding to iommu group 15
[    0.640749] pci 0000:05:00.1: Adding to iommu group 15
[    0.640754] pci 0000:05:00.2: Adding to iommu group 15
[    0.640756] pci 0000:06:08.0: Adding to iommu group 15
[    0.640757] pci 0000:06:09.0: Adding to iommu group 15
[    0.640759] pci 0000:07:00.0: Adding to iommu group 15
[    0.640761] pci 0000:08:00.0: Adding to iommu group 15
[    0.640780] pci 0000:09:00.0: Adding to iommu group 16
[    0.640784] pci 0000:09:00.1: Adding to iommu group 16
[    0.640789] pci 0000:0a:00.0: Adding to iommu group 17
[    0.640795] pci 0000:0b:00.0: Adding to iommu group 18
[    0.640801] pci 0000:0b:00.1: Adding to iommu group 19
[    0.640807] pci 0000:0b:00.3: Adding to iommu group 20
[    0.640813] pci 0000:0b:00.4: Adding to iommu group 21
[    0.643736] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.643737] AMD-Vi: Extended features (0x58f77ef22294a5a): PPR NX GT IA PC GA_vAPIC
[    0.643740] AMD-Vi: Interrupt remapping enabled
[    0.643799] software IO TLB: tearing down default memory pool
[    0.644212] LVT offset 0 assigned for vector 0x400
[    0.644309] perf: AMD IBS detected (0x000003ff)
[    0.644313] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.645033] Initialise system trusted keyrings
[    0.645041] Key type blacklist registered
[    0.645060] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.645527] zbud: loaded
[    0.647915] Key type asymmetric registered
[    0.647916] Asymmetric key parser 'x509' registered
[    0.647924] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.647960] io scheduler mq-deadline registered
[    0.647961] io scheduler kyber registered
[    0.647976] io scheduler bfq registered
[    0.648147] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[    0.648197] pcieport 0000:00:01.1: AER: enabled with IRQ 26
[    0.648294] pcieport 0000:00:01.2: PME: Signaling with IRQ 27
[    0.648339] pcieport 0000:00:01.2: AER: enabled with IRQ 27
[    0.648434] pcieport 0000:00:03.1: PME: Signaling with IRQ 28
[    0.648465] pcieport 0000:00:03.1: AER: enabled with IRQ 28
[    0.648593] pcieport 0000:00:07.1: PME: Signaling with IRQ 30
[    0.648628] pcieport 0000:00:07.1: AER: enabled with IRQ 30
[    0.648713] pcieport 0000:00:08.1: PME: Signaling with IRQ 31
[    0.648748] pcieport 0000:00:08.1: AER: enabled with IRQ 31
[    0.649145] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.649223] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.649236] ACPI: button: Power Button [PWRB]
[    0.649251] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.649962] ACPI: button: Power Button [PWRF]
[    0.653307] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1155
[    0.653320] Monitor-Mwait will be used to enter C-1 state
[    0.653324] ACPI: \_SB_.PLTF.C000: Found 2 idle states
[    0.656609] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[    0.656677] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[    0.656773] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[    0.656823] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[    0.656896] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[    0.656956] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[    0.657028] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[    0.657090] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[    0.657149] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[    0.657209] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[    0.657265] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[    0.657375] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.657923] Non-volatile memory driver v1.3
[    0.657924] Linux agpgart interface v0.103
[    0.657925] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.658429] nvme nvme0: pci function 0000:01:00.0
[    0.658454] ahci 0000:05:00.1: version 3.0
[    0.658569] ahci 0000:05:00.1: SSS flag set, parallel bus scan disabled
[    0.658624] ahci 0000:05:00.1: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.658627] ahci 0000:05:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.658931] scsi host0: ahci
[    0.658995] scsi host1: ahci
[    0.659049] scsi host2: ahci
[    0.659093] scsi host3: ahci
[    0.659136] scsi host4: ahci
[    0.659179] scsi host5: ahci
[    0.659201] ata1: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80100 irq 40
[    0.659204] ata2: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80180 irq 40
[    0.659205] ata3: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80200 irq 40
[    0.659207] ata4: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80280 irq 40
[    0.659209] ata5: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80300 irq 40
[    0.659211] ata6: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80380 irq 40
[    0.659239] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.659242] ehci-pci: EHCI PCI platform driver
[    0.659248] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.659252] ohci-pci: OHCI PCI platform driver
[    0.659259] uhci_hcd: USB Universal Host Controller Interface driver
[    0.659283] usbcore: registered new interface driver usbserial_generic
[    0.659286] usbserial: USB Serial support registered for generic
[    0.659326] rtc_cmos 00:02: RTC can wake from S4
[    0.659495] rtc_cmos 00:02: registered as rtc0
[    0.659524] rtc_cmos 00:02: setting system clock to 2021-11-16T17:03:56 UTC (1637082236)
[    0.659536] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.659610] ledtrig-cpu: registered to indicate activity on CPUs
[    0.659727] vesafb: mode is 3840x2160x32, linelength=15360, pages=0
[    0.659728] vesafb: scrolling: redraw
[    0.659729] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.659735] vesafb: framebuffer at 0xd0000000, mapped to 0x00000000b32258fd, using 32448k, total 32448k
[    0.659752] fbcon: Deferring console take-over
[    0.659753] fb0: VESA VGA frame buffer device
[    0.659761] hid: raw HID events driver (C) Jiri Kosina
[    0.659802] drop_monitor: Initializing network drop monitor service
[    0.659846] Initializing XFRM netlink socket
[    0.659905] NET: Registered PF_INET6 protocol family
[    0.662306] Freeing initrd memory: 8204K
[    0.664229] Segment Routing with IPv6
[    0.664229] RPL Segment Routing with IPv6
[    0.664235] In-situ OAM (IOAM) with IPv6
[    0.664247] NET: Registered PF_PACKET protocol family
[    0.664663] microcode: CPU0: patch_level=0x0a201016
[    0.664665] microcode: CPU1: patch_level=0x0a201016
[    0.664670] microcode: CPU2: patch_level=0x0a201016
[    0.664675] microcode: CPU3: patch_level=0x0a201016
[    0.664681] microcode: CPU4: patch_level=0x0a201016
[    0.664686] microcode: CPU5: patch_level=0x0a201016
[    0.664691] microcode: CPU6: patch_level=0x0a201016
[    0.664696] microcode: CPU7: patch_level=0x0a201016
[    0.664698] microcode: CPU8: patch_level=0x0a201016
[    0.664703] microcode: CPU9: patch_level=0x0a201016
[    0.664707] microcode: CPU10: patch_level=0x0a201016
[    0.664711] microcode: CPU11: patch_level=0x0a201016
[    0.664713] microcode: Microcode Update Driver: v2.2.
[    0.664782] resctrl: L3 allocation detected
[    0.664783] resctrl: MB allocation detected
[    0.664784] resctrl: L3 monitoring detected
[    0.664786] IPI shorthand broadcast: enabled
[    0.664792] sched_clock: Marking stable (347818061, 316960110)->(736644536, -71866365)
[    0.664984] registered taskstats version 1
[    0.665107] Loading compiled-in X.509 certificates
[    0.666633] Loaded X.509 cert 'Build time autogenerated kernel key: ac48247ae4b694dd45afa078318e6038d5aa91dc'
[    0.667359] zswap: loaded using pool lz4/z3fold
[    0.667689] Key type ._fscrypt registered
[    0.667689] Key type .fscrypt registered
[    0.667690] Key type fscrypt-provisioning registered
[    0.667852] PM:   Magic number: 13:549:87
[    0.667871] button LNXPWRBN:00: hash matches
[    0.667904] memory memory240: hash matches
[    0.667977] RAS: Correctable Errors collector initialized.
[    0.672783] nvme nvme0: Shutdown timeout set to 10 seconds
[    0.678794] nvme nvme0: 32/0/0 default/read/poll queues
[    0.681102]  nvme0n1: p1 p2
[    0.975355] ata1: SATA link down (SStatus 0 SControl 300)
[    1.453288] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.455446] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100
[    1.456269] ata2.00: configured for UDMA/100
[    1.457583] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB00 PQ: 0 ANSI: 5
[    1.655184] tsc: Refined TSC clocksource calibration: 3693.060 MHz
[    1.655193] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a77744cfd5, max_idle_ns: 881590969987 ns
[    1.655231] clocksource: Switched to clocksource tsc
[    1.821580] ata3: SATA link down (SStatus 0 SControl 330)
[    2.134836] ata4: SATA link down (SStatus 0 SControl 330)
[    2.448352] ata5: SATA link down (SStatus 0 SControl 330)
[    3.481849] ata6: failed to resume link (SControl 0)
[    3.481870] ata6: SATA link down (SStatus 0 SControl 0)
[    3.482507] Freeing unused decrypted memory: 2036K
[    3.482805] Freeing unused kernel image (initmem) memory: 1832K
[    3.482808] Write protecting the kernel read-only data: 28672k
[    3.483093] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    3.483261] Freeing unused kernel image (rodata/data gap) memory: 1516K
[    3.504232] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.504235] rodata_test: all tests were successful
[    3.504239] Run /init as init process
[    3.504240]   with arguments:
[    3.504240]     /init
[    3.504241]   with environment:
[    3.504241]     HOME=/
[    3.504241]     TERM=linux
[    3.504242]     BOOT_IMAGE=/vmlinuz-linux
[    3.510710] fbcon: Taking over console
[    3.510758] Console: switching to colour frame buffer device 240x67
[    3.769644] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.769651] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
[    3.772878] raid6: skip pq benchmark and using algorithm avx2x4
[    3.772880] raid6: using avx2x2 recovery algorithm
[    3.774639] xor: automatically using best checksumming function   avx       
[    3.815191] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.815192] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.819990] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[    3.820259] BTRFS: device fsid 8b90b3e6-d80e-445d-adf5-cc65a591b835 devid 1 transid 2511 /dev/nvme0n1p2 scanned by systemd-udevd (237)
[    3.825006] xhci_hcd 0000:05:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    3.825302] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.825303] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.825304] usb usb1: Product: xHCI Host Controller
[    3.825305] usb usb1: Manufacturer: Linux 5.15.2-arch1-1 xhci-hcd
[    3.825305] usb usb1: SerialNumber: 0000:05:00.0
[    3.825377] hub 1-0:1.0: USB hub found
[    3.825389] hub 1-0:1.0: 10 ports detected
[    3.825591] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.825593] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[    3.825594] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    3.825638] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.825650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    3.825651] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.825652] usb usb2: Product: xHCI Host Controller
[    3.825652] usb usb2: Manufacturer: Linux 5.15.2-arch1-1 xhci-hcd
[    3.825653] usb usb2: SerialNumber: 0000:05:00.0
[    3.825691] hub 2-0:1.0: USB hub found
[    3.825697] hub 2-0:1.0: 4 ports detected
[    3.825845] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    3.825848] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 3
[    3.825952] xhci_hcd 0000:0b:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[    3.826191] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.826192] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.826192] usb usb3: Product: xHCI Host Controller
[    3.826193] usb usb3: Manufacturer: Linux 5.15.2-arch1-1 xhci-hcd
[    3.826193] usb usb3: SerialNumber: 0000:0b:00.3
[    3.826230] hub 3-0:1.0: USB hub found
[    3.826235] hub 3-0:1.0: 4 ports detected
[    3.826361] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    3.826362] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 4
[    3.826363] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    3.826371] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.826378] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    3.826379] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.826380] usb usb4: Product: xHCI Host Controller
[    3.826381] usb usb4: Manufacturer: Linux 5.15.2-arch1-1 xhci-hcd
[    3.826381] usb usb4: SerialNumber: 0000:0b:00.3
[    3.826414] hub 4-0:1.0: USB hub found
[    3.826419] hub 4-0:1.0: 4 ports detected
[    3.891806] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.141573] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[    4.232316] BTRFS info (device nvme0n1p2): flagging fs with big metadata feature
[    4.232318] BTRFS info (device nvme0n1p2): disk space caching is enabled
[    4.232319] BTRFS info (device nvme0n1p2): has skinny extents
[    4.246075] random: fast init done
[    4.255149] BTRFS info (device nvme0n1p2): enabling ssd optimizations
[    4.328981] systemd[1]: systemd 249.6-3-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    4.344919] systemd[1]: Detected architecture x86-64.
[    4.345212] systemd[1]: Hostname set to <cedric>.
[    4.369084] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    4.371174] usb 1-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    4.371176] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.371177] usb 1-6: Product: USB2.0 Hub
[    4.378178] hub 1-6:1.0: USB hub found
[    4.382165] hub 1-6:1.0: 4 ports detected
[    4.397217] systemd[1]: Queued start job for default target Graphical Interface.
[    4.397751] systemd[1]: Created slice Slice /system/getty.
[    4.397872] systemd[1]: Created slice Slice /system/modprobe.
[    4.398013] systemd[1]: Created slice Slice /system/syslog-ng.
[    4.398107] systemd[1]: Created slice Slice /system/systemd-fsck.
[    4.398183] systemd[1]: Created slice User and Session Slice.
[    4.398210] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.398234] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.398296] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.398309] systemd[1]: Reached target Local Encrypted Volumes.
[    4.398323] systemd[1]: Reached target Remote File Systems.
[    4.398327] systemd[1]: Reached target Slice Units.
[    4.398333] systemd[1]: Reached target Swaps.
[    4.398340] systemd[1]: Reached target Local Verity Protected Volumes.
[    4.398365] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.398533] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.398933] systemd[1]: Listening on Process Core Dump Socket.
[    4.398987] systemd[1]: Listening on Journal Audit Socket.
[    4.399021] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.399055] systemd[1]: Listening on Journal Socket.
[    4.399328] systemd[1]: Listening on udev Control Socket.
[    4.399361] systemd[1]: Listening on udev Kernel Socket.
[    4.399661] systemd[1]: Mounting Huge Pages File System...
[    4.399970] systemd[1]: Mounting POSIX Message Queue File System...
[    4.400266] systemd[1]: Mounting Kernel Debug File System...
[    4.400575] systemd[1]: Mounting Kernel Trace File System...
[    4.400874] systemd[1]: Mounting Temporary Directory /tmp...
[    4.401227] systemd[1]: Starting Create List of Static Device Nodes...
[    4.401498] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.401797] systemd[1]: Starting Load Kernel Module configfs...
[    4.402080] systemd[1]: Starting Load Kernel Module drm...
[    4.402469] systemd[1]: Starting Load Kernel Module fuse...
[    4.402751] random: lvm: uninitialized urandom read (4 bytes read)
[    4.402771] systemd[1]: Starting Set Up Additional Binary Formats...
[    4.403478] systemd[1]: Starting Journal Service...
[    4.403940] systemd[1]: Starting Load Kernel Modules...
[    4.404276] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.404316] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    4.404687] systemd[1]: Starting Coldplug All udev Devices...
[    4.405347] systemd[1]: Mounted Huge Pages File System.
[    4.405384] systemd[1]: Mounted POSIX Message Queue File System.
[    4.405411] systemd[1]: Mounted Kernel Debug File System.
[    4.405437] systemd[1]: Mounted Kernel Trace File System.
[    4.405461] systemd[1]: Mounted Temporary Directory /tmp.
[    4.405573] systemd[1]: Finished Create List of Static Device Nodes.
[    4.405733] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.405815] systemd[1]: Finished Load Kernel Module configfs.
[    4.405907] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.406006] systemd[1]: Finished Load Kernel Module drm.
[    4.406076] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 339 (systemd-binfmt)
[    4.406378] BTRFS info (device nvme0n1p2): use zlib compression, level 3
[    4.406383] BTRFS info (device nvme0n1p2): disk space caching is enabled
[    4.406584] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    4.407055] systemd[1]: Mounting Kernel Configuration File System...
[    4.407590] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.407902] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    4.407968] systemd[1]: Mounted Kernel Configuration File System.
[    4.408012] fuse: init (API version 7.34)
[    4.408023] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    4.408342] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    4.408767] systemd[1]: Starting Load/Save Random Seed...
[    4.408798] systemd[1]: Condition check resulted in Create System Users being skipped.
[    4.409234] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.409412] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.409544] systemd[1]: Finished Load Kernel Module fuse.
[    4.409757] systemd[1]: Finished Set Up Additional Binary Formats.
[    4.410207] systemd[1]: Mounting FUSE Control File System...
[    4.416484] vboxdrv: loading out-of-tree module taints kernel.
[    4.416621] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    4.418978] vboxdrv: Found 12 processor cores
[    4.420713] systemd[1]: Mounted FUSE Control File System.
[    4.427138] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.427165] audit: type=1130 audit(1637082240.262:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.427566] audit: type=1334 audit(1637082240.262:3): prog-id=14 op=LOAD
[    4.427638] audit: type=1334 audit(1637082240.262:4): prog-id=15 op=LOAD
[    4.427685] audit: type=1334 audit(1637082240.262:5): prog-id=16 op=LOAD
[    4.427841] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    4.428183] systemd[1]: Started Journal Service.
[    4.428216] audit: type=1130 audit(1637082240.262:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.430581] systemd-journald[340]: Received client request to flush runtime journal.
[    4.441676] vboxdrv: TSC mode is Invariant, tentative frequency 3693052604 Hz
[    4.441677] vboxdrv: Successfully loaded version 6.1.28 r147628 (interface 0x00320000)
[    4.443952] VBoxNetAdp: Successfully started.
[    4.447509] VBoxNetFlt: Successfully started.
[    4.447944] audit: type=1130 audit(1637082240.282:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.450565] audit: type=1130 audit(1637082240.285:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.451130] audit: type=1130 audit(1637082240.285:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.457133] audit: type=1130 audit(1637082240.292:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.528230] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    4.530504] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    4.530505] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.530710] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    4.530831] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20210730/utaddress-204)
[    4.530837] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.531253] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    4.532816] ccp 0000:0b:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[    4.585089] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    4.585165] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    4.585172] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    4.585357] cryptd: max_cpu_qlen set to 1000
[    4.598771] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.600650] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.600950] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.600952] cfg80211: failed to load regulatory.db
[    4.602638] AVX2 version of gcm_enc/dec engaged.
[    4.602682] AES CTR mode by8 optimization enabled
[    4.612611] Intel(R) Wireless WiFi driver for Linux
[    4.613132] libphy: r8169: probed
[    4.613317] r8169 0000:07:00.0 eth0: RTL8125B, 18:c0:4d:db:fe:78, XID 641, IRQ 94
[    4.613320] r8169 0000:07:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    4.624287] r8169 0000:07:00.0 eno1: renamed from eth0
[    4.633814] iwlwifi 0000:08:00.0: WRT: Overriding region id 0
[    4.633817] iwlwifi 0000:08:00.0: WRT: Overriding region id 1
[    4.633818] iwlwifi 0000:08:00.0: WRT: Overriding region id 2
[    4.633818] iwlwifi 0000:08:00.0: WRT: Overriding region id 3
[    4.633818] iwlwifi 0000:08:00.0: WRT: Overriding region id 4
[    4.633819] iwlwifi 0000:08:00.0: WRT: Overriding region id 6
[    4.633820] iwlwifi 0000:08:00.0: WRT: Overriding region id 8
[    4.633820] iwlwifi 0000:08:00.0: WRT: Overriding region id 9
[    4.633820] iwlwifi 0000:08:00.0: WRT: Overriding region id 10
[    4.633821] iwlwifi 0000:08:00.0: WRT: Overriding region id 11
[    4.633822] iwlwifi 0000:08:00.0: WRT: Overriding region id 15
[    4.633822] iwlwifi 0000:08:00.0: WRT: Overriding region id 16
[    4.633823] iwlwifi 0000:08:00.0: WRT: Overriding region id 18
[    4.633823] iwlwifi 0000:08:00.0: WRT: Overriding region id 19
[    4.633824] iwlwifi 0000:08:00.0: WRT: Overriding region id 20
[    4.633824] iwlwifi 0000:08:00.0: WRT: Overriding region id 21
[    4.633824] iwlwifi 0000:08:00.0: WRT: Overriding region id 28
[    4.633984] iwlwifi 0000:08:00.0: loaded firmware version 46.6b541b68.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
[    4.711911] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.734801] random: dhcpcd: uninitialized urandom read (112 bytes read)
[    4.780720] [drm] amdgpu kernel modesetting enabled.
[    4.798575] snd_hda_intel 0000:09:00.1: Handle vga_switcheroo audio client
[    4.798581] snd_hda_intel 0000:09:00.1: Force to non-snoop mode
[    4.800649] amdgpu: Ignoring ACPI CRAT on non-APU system
[    4.800652] amdgpu: Virtual CRAT table created for CPU
[    4.800660] amdgpu: Topology: Add CPU node
[    4.800724] checking generic (d0000000 1fb0000) vs hw (d0000000 10000000)
[    4.800726] fb0: switching to amdgpu from VESA VGA
[    4.800981] iwlwifi 0000:08:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x324
[    4.801309] Console: switching to colour dummy device 80x25
[    4.801344] amdgpu 0000:09:00.0: vgaarb: deactivate vga console
[    4.801612] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1462:0x8A90 0xC7).
[    4.801619] amdgpu 0000:09:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[    4.801632] [drm] register mmio base: 0xFCF00000
[    4.801633] [drm] register mmio size: 262144
[    4.801650] [drm] add ip block number 0 <vi_common>
[    4.801652] [drm] add ip block number 1 <gmc_v8_0>
[    4.801654] [drm] add ip block number 2 <tonga_ih>
[    4.801657] [drm] add ip block number 3 <gfx_v8_0>
[    4.801660] [drm] add ip block number 4 <sdma_v3_0>
[    4.801662] [drm] add ip block number 5 <powerplay>
[    4.801664] [drm] add ip block number 6 <dm>
[    4.801667] [drm] add ip block number 7 <uvd_v6_0>
[    4.801670] [drm] add ip block number 8 <vce_v3_0>
[    4.801979] amdgpu 0000:09:00.0: No more image in the PCI ROM
[    4.802015] amdgpu 0000:09:00.0: amdgpu: Fetched VBIOS from ROM BAR
[    4.802018] amdgpu: ATOM BIOS: 113-d09001-e02
[    4.802036] [drm] UVD is enabled in VM mode
[    4.802037] [drm] UVD ENC is enabled in VM mode
[    4.802040] [drm] VCE enabled in VM mode
[    4.802073] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    4.802640] amdgpu 0000:09:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[    4.802643] amdgpu 0000:09:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[    4.802650] [drm] Detected VRAM RAM=2048M, BAR=256M
[    4.802651] [drm] RAM width 128bits GDDR5
[    4.802681] [drm] amdgpu: 2048M of VRAM memory ready
[    4.802682] [drm] amdgpu: 3072M of GTT memory ready.
[    4.802686] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    4.805367] [drm] PCIE GART of 256M enabled (table at 0x000000F401FA4000).
[    4.806161] [drm] Chained IB support enabled!
[    4.807993] thermal thermal_zone0: failed to read out thermal zone (-61)
[    4.809403] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[    4.809914] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    4.810851] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    4.848881] iwlwifi 0000:08:00.0: base HW address: bc:17:b8:b7:ae:da
[    4.868249] 8021q: 802.1Q VLAN Support v1.8
[    4.893434] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input3
[    4.897377] kvm: disabled by bios
[    4.897387] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input4
[    4.897421] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input5
[    4.897448] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input6
[    4.897473] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input7
[    4.898135] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    4.898139] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.898141] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.898143] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.898144] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    4.898145] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.898146] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.898148] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.898149] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    4.907772] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[    4.907797] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[    4.907812] [drm] Display Core initialized with v3.2.149!
[    4.916333] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    4.917784] iwlwifi 0000:08:00.0 wlp8s0: renamed from wlan0
[    4.921659] snd_hda_intel 0000:09:00.1: bound 0000:09:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    4.930956] usb 1-7: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    4.930960] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.930963] usb 1-7: Product: ITE Device
[    4.930964] usb 1-7: Manufacturer: ITE Tech. Inc.
[    4.988645] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input8
[    4.988677] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input9
[    4.988701] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input10
[    4.988724] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input11
[    4.988747] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input12
[    4.988771] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input13
[    4.988799] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input14
[    5.020924] kvm: disabled by bios
[    5.021601] MCE: In-kernel MCE decoding enabled.
[    5.028247] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC)
[    5.073726] [drm] UVD and UVD ENC initialized successfully.
[    5.124896] usb 1-9: new high-speed USB device number 4 using xhci_hcd
[    5.174654] [drm] VCE initialized successfully.
[    5.175891] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    5.175989] amdgpu: SRAT table not found
[    5.175990] amdgpu: Virtual CRAT table created for GPU
[    5.176020] amdgpu: Topology: Add dGPU node [0x699f:0x1002]
[    5.176024] kfd kfd: amdgpu: added device 1002:699f
[    5.176055] amdgpu 0000:09:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 5, active_cu_number 8
[    5.178716] kvm: disabled by bios
[    5.182240] [drm] fb mappable at 0xD24D4000
[    5.182241] [drm] vram apper at 0xD0000000
[    5.182241] [drm] size 33177600
[    5.182242] [drm] fb depth is 24
[    5.182242] [drm]    pitch is 15360
[    5.182279] fbcon: amdgpu (fb0) is primary device
[    5.186289] intel_rapl_common: Found RAPL domain package
[    5.186290] intel_rapl_common: Found RAPL domain core
[    5.195074] r8169 0000:07:00.0 eno1: Link is Down
[    5.343144] usb 1-9: New USB device found, idVendor=050d, idProduct=0234, bcdDevice= 0.00
[    5.343146] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.350155] hub 1-9:1.0: USB hub found
[    5.353131] hub 1-9:1.0: 4 ports detected
[    5.366134] kvm: disabled by bios
[    5.504581] Console: switching to colour frame buffer device 240x67
[    5.521487] amdgpu 0000:09:00.0: [drm] fb0: amdgpu frame buffer device
[    5.524029] kvm: disabled by bios
[    5.540920] amdgpu 0000:09:00.0: amdgpu: Using BACO for runtime pm
[    5.541102] [drm] Initialized amdgpu 3.42.0 20150101 for 0000:09:00.0 on minor 0
[    5.564893] usb 1-10: new high-speed USB device number 5 using xhci_hcd
[    5.688187] kvm: disabled by bios
[    5.794107] usb 1-10: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    5.794110] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.794111] usb 1-10: Product: USB2.0 Hub
[    5.803130] hub 1-10:1.0: USB hub found
[    5.807106] hub 1-10:1.0: 4 ports detected
[    5.835299] kvm: disabled by bios
[    5.857703] hid-generic 0003:048D:5702.0001: hiddev96,hidraw0: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:05:00.0-7/input0
[    5.857719] usbcore: registered new interface driver usbhid
[    5.857719] usbhid: USB HID core driver
[    5.888217] usb 1-9.2: new low-speed USB device number 6 using xhci_hcd
[    6.033025] kvm: disabled by bios
[    6.145077] usb 1-9.2: New USB device found, idVendor=046d, idProduct=c03e, bcdDevice=20.00
[    6.145079] usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.145081] usb 1-9.2: Product: USB-PS/2 Optical Mouse
[    6.145081] usb 1-9.2: Manufacturer: Logitech
[    6.166714] kvm: disabled by bios
[    6.179147] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:05:00.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C03E.0002/input/input15
[    6.179202] hid-generic 0003:046D:C03E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:05:00.0-9.2/input0
[    6.238203] random: crng init done
[    6.238203] random: 3 urandom warning(s) missed due to ratelimiting
[    6.241547] usb 1-10.1: new high-speed USB device number 7 using xhci_hcd
[    6.253203] kauditd_printk_skb: 17 callbacks suppressed
[    6.253205] audit: type=1130 audit(1637082242.089:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.312272] kvm: disabled by bios
[    6.463954] audit: type=1130 audit(1637082242.299:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=syslog-ng@default comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.497049] usb 1-10.1: New USB device found, idVendor=0bda, idProduct=525d, bcdDevice=58.01
[    6.497053] usb 1-10.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    6.497054] usb 1-10.1: Product: HK 2M CAM
[    6.497055] usb 1-10.1: Manufacturer: WDH
[    6.497056] usb 1-10.1: SerialNumber: 202001010001
[    6.588189] usb 1-9.3: new low-speed USB device number 8 using xhci_hcd
[    6.837028] usb 1-9.3: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[    6.837032] usb 1-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.837033] usb 1-9.3: Product: USB Keyboard
[    6.837035] usb 1-9.3: Manufacturer: Logitech
[    6.906246] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:05:00.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:046D:C31C.0003/input/input16
[    6.961996] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:05:00.0-9.3/input0
[    6.974923] usb 1-10.2: new high-speed USB device number 9 using xhci_hcd
[    7.061455] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:05:00.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C31C.0004/input/input17
[    7.115190] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:05:00.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C31C.0004/input/input18
[    7.115232] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:05:00.0-9.3/input1
[    7.142955] mousedev: PS/2 mouse device common for all mice
[    7.150293] audit: type=1130 audit(1637082242.985:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=gpm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.657043] usb 1-10.2: New USB device found, idVendor=0bda, idProduct=0151, bcdDevice=51.95
[    7.657050] usb 1-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.657052] usb 1-10.2: Product: USB2.0-CRW
[    7.657054] usb 1-10.2: Manufacturer: Generic
[    7.657055] usb 1-10.2: SerialNumber: 20060413092100000
[    7.694059] mc: Linux media interface: v0.10
[    7.694939] usb-storage 1-10.2:1.0: USB Mass Storage device detected
[    7.695004] scsi host6: usb-storage 1-10.2:1.0
[    7.695051] usbcore: registered new interface driver usb-storage
[    7.697835] usbcore: registered new interface driver uas
[    7.701480] videodev: Linux video capture interface: v2.00
[    7.722981] usb 1-10.1: current rate 48000 is different from the runtime rate 8000
[    7.939023] usb 1-10.1: current rate 48000 is different from the runtime rate 16000
[    8.154001] usb 1-10.1: current rate 48000 is different from the runtime rate 44100
[    8.198246] r8169 0000:07:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[    8.198260] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[    8.585975] usb 1-10.1: current rate 48000 is different from the runtime rate 8000
[    8.730491] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    8.736648] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    8.742861] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    8.749045] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    8.749745] sd 6:0:0:0: [sda] Media removed, stopped polling
[    8.802175] usb 1-10.1: current rate 48000 is different from the runtime rate 16000
[    9.018181] usb 1-10.1: current rate 48000 is different from the runtime rate 44100
[    9.294403] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[    9.489050] usbcore: registered new interface driver snd-usb-audio
[    9.491937] usb 1-10.1: Found UVC 1.00 device HK 2M CAM (0bda:525d)
[    9.550391] input: HK 2M CAM: HK 2M CAM as /devices/pci0000:00/0000:00:01.2/0000:05:00.0/usb1/1-10/1-10.1/1-10.1:1.0/input/input19
[    9.550478] usbcore: registered new interface driver uvcvideo
[    9.678991] sd 6:0:0:1: [sdb] Media removed, stopped polling
[    9.679577] sd 6:0:0:2: [sdc] Media removed, stopped polling
[    9.771057] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[    9.925170] audit: type=1131 audit(1637082245.762:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.984393] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.320525] sd 6:0:0:3: [sdd] Media removed, stopped polling
[   10.321131] sd 6:0:0:0: [sda] Attached SCSI removable disk
[   10.407801] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.694323] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.757363] audit: type=1100 audit(1637082247.592:32): pid=527 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[   11.767088] audit: type=1101 audit(1637082247.602:33): pid=527 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[   11.767592] audit: type=1103 audit(1637082247.602:34): pid=527 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[   11.767624] audit: type=1006 audit(1637082247.602:35): pid=527 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   11.767628] audit: type=1300 audit(1637082247.602:35): arch=c000003e syscall=1 success=yes exit=4 a0=5 a1=7ffe74f13d90 a2=4 a3=3e8 items=0 ppid=1 pid=527 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=1000 fsgid=0 tty=tty1 ses=1 comm="login" exe="/usr/bin/login" key=(null)
[   11.767630] audit: type=1327 audit(1637082247.602:35): proctitle=2F62696E2F6C6F67696E002D70002D2D
[   11.777744] audit: type=1130 audit(1637082247.612:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.780700] audit: type=1101 audit(1637082247.615:37): pid=690 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="cedric" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.780713] audit: type=1103 audit(1637082247.615:38): pid=690 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="cedric" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   11.780733] audit: type=1006 audit(1637082247.615:39): pid=690 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   11.913859] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.037619] sd 6:0:0:3: [sdd] Attached SCSI removable disk
[   12.124323] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.115561] sd 6:0:0:2: [sdc] Attached SCSI removable disk
[   13.204427] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.329617] sd 6:0:0:1: [sdb] Attached SCSI removable disk
[   20.760259] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.885046] kauditd_printk_skb: 12 callbacks suppressed
[   20.885049] audit: type=1130 audit(1637082256.722:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  894.841512] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  905.082412] audit: type=1130 audit(1637083141.320:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  905.082418] audit: type=1131 audit(1637083141.320:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  928.973763] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[ 3639.135517] sr 1:0:0:0: [sr0] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 3639.135521] sr 1:0:0:0: [sr0] tag#3 Sense Key : Not Ready [current] 
[ 3639.135523] sr 1:0:0:0: [sr0] tag#3 Add. Sense: Medium not present - tray closed
[ 3639.135524] sr 1:0:0:0: [sr0] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[ 3639.135525] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 3639.135546] sr 1:0:0:0: [sr0] tag#4 unaligned transfer
[ 3639.135548] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 3639.135550] Buffer I/O error on dev sr0, logical block 0, async page read
[ 3639.135556] sr 1:0:0:0: [sr0] tag#5 unaligned transfer
[ 3639.135556] blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 3639.135557] Buffer I/O error on dev sr0, logical block 1, async page read
[ 3639.135560] sr 1:0:0:0: [sr0] tag#6 unaligned transfer
[ 3639.135561] blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 3639.135561] Buffer I/O error on dev sr0, logical block 2, async page read
[ 3639.135564] sr 1:0:0:0: [sr0] tag#7 unaligned transfer
[ 3639.135565] blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 3639.135565] Buffer I/O error on dev sr0, logical block 3, async page read
[ 3639.135568] sr 1:0:0:0: [sr0] tag#8 unaligned transfer
[ 3639.135568] blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 3639.135569] Buffer I/O error on dev sr0, logical block 4, async page read
[ 3639.135571] sr 1:0:0:0: [sr0] tag#9 unaligned transfer
[ 3639.135572] blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 3639.135572] Buffer I/O error on dev sr0, logical block 5, async page read
[ 3639.135575] sr 1:0:0:0: [sr0] tag#10 unaligned transfer
[ 3639.135575] blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 3639.135576] Buffer I/O error on dev sr0, logical block 6, async page read
[ 3639.135578] sr 1:0:0:0: [sr0] tag#11 unaligned transfer
[ 3639.135579] blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 3639.135579] Buffer I/O error on dev sr0, logical block 7, async page read
[ 3639.292685] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[ 3980.619641] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[ 3982.803331] audit: type=1100 audit(1637086219.124:51): pid=2437 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3982.803349] audit: type=1101 audit(1637086219.124:52): pid=2437 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3982.803566] audit: type=1103 audit(1637086219.124:53): pid=2437 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3982.803600] audit: type=1105 audit(1637086219.124:54): pid=2437 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 3982.959572] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd

Starting suspend with the new BIOS (mb_bios_b550-aorus-pro-ac_f14e.zip)

[12945.002898] audit: type=1334 audit(1637095181.592:55): prog-id=21 op=LOAD
[12945.002948] audit: type=1334 audit(1637095181.592:56): prog-id=22 op=LOAD
[12945.032676] audit: type=1130 audit(1637095181.622:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12946.115048] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[12946.345038] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[12946.758379] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[12946.828219] PM: suspend entry (deep)
[12946.840568] Filesystems sync: 0.012 seconds
[12946.841122] Freezing user space processes ... (elapsed 0.001 seconds) done.
[12946.842583] OOM killer disabled.
[12946.842584] Freezing remaining freezable tasks ... 
[12946.991687] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[12947.118187] (elapsed 0.275 seconds) done.
[12947.118215] printk: Suspending console(s) (use no_console_suspend to debug)
[12947.137147] r8169 0000:07:00.0 eno1: Link is Down
[12947.676494] ACPI: PM: Preparing to enter system sleep state S3
[12948.019984] ACPI: PM: Saving platform NVS memory
[12948.020052] Disabling non-boot CPUs ...
[12948.021987] smpboot: CPU 1 is now offline
[12948.024765] smpboot: CPU 2 is now offline
[12948.027237] smpboot: CPU 3 is now offline
[12948.029952] smpboot: CPU 4 is now offline
[12948.032302] smpboot: CPU 5 is now offline
[12948.034555] smpboot: CPU 6 is now offline
[12948.035251] Spectre V2 : Update user space SMT mitigation: STIBP off
[12948.036660] smpboot: CPU 7 is now offline
[12948.038756] smpboot: CPU 8 is now offline
[12948.040963] smpboot: CPU 9 is now offline
[12948.042873] smpboot: CPU 10 is now offline
[12948.044824] smpboot: CPU 11 is now offline
[12948.045859] ACPI: PM: Low-level resume complete
[12948.045899] ACPI: PM: Restoring platform NVS memory
[12948.046118] LVT offset 0 assigned for vector 0x400
[12948.046574] Enabling non-boot CPUs ...
[12948.046629] x86: Booting SMP configuration:
[12948.046630] smpboot: Booting Node 0 Processor 1 APIC 0x2
[12948.047378] microcode: CPU1: patch_level=0x0a201016
[12948.049594] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[12948.050155] CPU1 is up
[12948.050171] smpboot: Booting Node 0 Processor 2 APIC 0x4
[12948.050308] microcode: CPU2: patch_level=0x0a201016
[12948.052530] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[12948.053513] CPU2 is up
[12948.053528] smpboot: Booting Node 0 Processor 3 APIC 0x6
[12948.053626] microcode: CPU3: patch_level=0x0a201016
[12948.055831] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[12948.056867] CPU3 is up
[12948.056882] smpboot: Booting Node 0 Processor 4 APIC 0x8
[12948.057034] microcode: CPU4: patch_level=0x0a201016
[12948.059249] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[12948.060235] CPU4 is up
[12948.060250] smpboot: Booting Node 0 Processor 5 APIC 0xa
[12948.060347] microcode: CPU5: patch_level=0x0a201016
[12948.062560] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[12948.063530] CPU5 is up
[12948.063546] smpboot: Booting Node 0 Processor 6 APIC 0x1
[12948.063677] microcode: CPU6: patch_level=0x0a201016
[12948.065907] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[12948.066951] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[12948.066966] CPU6 is up
[12948.066991] smpboot: Booting Node 0 Processor 7 APIC 0x3
[12948.067097] microcode: CPU7: patch_level=0x0a201016
[12948.069323] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[12948.070281] CPU7 is up
[12948.070297] smpboot: Booting Node 0 Processor 8 APIC 0x5
[12948.070418] microcode: CPU8: patch_level=0x0a201016
[12948.072644] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[12948.073613] CPU8 is up
[12948.073629] smpboot: Booting Node 0 Processor 9 APIC 0x7
[12948.073733] microcode: CPU9: patch_level=0x0a201016
[12948.075954] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[12948.077004] CPU9 is up
[12948.077019] smpboot: Booting Node 0 Processor 10 APIC 0x9
[12948.077143] microcode: CPU10: patch_level=0x0a201016
[12948.079362] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[12948.080358] CPU10 is up
[12948.080374] smpboot: Booting Node 0 Processor 11 APIC 0xb
[12948.080483] microcode: CPU11: patch_level=0x0a201016
[12948.082715] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[12948.083715] CPU11 is up
[12948.084623] ACPI: PM: Waking up from system sleep state S3
[12948.157489] usb usb1: root hub lost power or was reset
[12948.157491] usb usb2: root hub lost power or was reset
[12948.256860] nvme nvme0: Shutdown timeout set to 10 seconds
[12948.262096] nvme nvme0: 32/0/0 default/read/poll queues
[12948.280153] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000).
[12948.346748] r8169 0000:07:00.0 eno1: Link is Down
[12948.469741] ata3: SATA link down (SStatus 0 SControl 330)
[12948.469787] ata1: SATA link down (SStatus 0 SControl 300)
[12948.469919] ata4: SATA link down (SStatus 0 SControl 330)
[12948.469978] ata5: SATA link down (SStatus 0 SControl 330)
[12948.606823] usb 1-10: reset high-speed USB device number 5 using xhci_hcd
[12948.626681] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[12948.643621] ata2.00: configured for UDMA/100
[12948.663784] [drm] UVD and UVD ENC initialized successfully.
[12948.764747] [drm] VCE initialized successfully.
[12949.010742] usb 1-7: reset full-speed USB device number 3 using xhci_hcd
[12949.190252] ata6: failed to resume link (SControl 0)
[12949.190267] ata6: SATA link down (SStatus 0 SControl 0)
[12949.487413] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[12949.890870] usb 1-9: reset high-speed USB device number 4 using xhci_hcd
[12950.190687] usb 1-10.1: reset high-speed USB device number 10 using xhci_hcd
[12950.757492] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[12951.321165] r8169 0000:07:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[12951.744040] usb 1-9.3: reset low-speed USB device number 8 using xhci_hcd
[12952.417362] usb 1-9.2: reset low-speed USB device number 6 using xhci_hcd
[12952.852626] OOM killer enabled.
[12952.852627] Restarting tasks ... done.
[12952.854751] PM: suspend exit
[12952.868392] audit: type=1130 audit(1637095190.820:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12952.868397] audit: type=1131 audit(1637095190.820:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12953.168999] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd

cdwijs

Member

Registered: 2010-04-24

Posts: 289

Re: updated BIOS: system immediately resumes from suspend (Gigabyte B550)

I have downgraded my BIOS to mb_bios_b550-aorus-pro-ac_f13j.zip The PC still resumes automatically directly after suspending.

Dmesg from boot:

[    0.000000] Linux version 5.15.2-arch1-1 (linux@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Fri, 12 Nov 2021 19:22:10 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8b90b3e6-d80e-445d-adf5-cc65a591b835 rw rootflags=subvol=root loglevel=3 quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 3376
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c1efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c1f000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20e000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bc734fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc735000-0x00000000bca6bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bca6c000-0x00000000bcab2fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bcab3000-0x00000000bd130fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd131000-0x00000000bddfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000083f380000-0x000000083fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 AORUS PRO AC/B550 AORUS PRO AC, BIOS F13j 04/23/2021
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3693.106 MHz processor
[    0.000312] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000313] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000318] last_pfn = 0x83f380 max_arch_pfn = 0x400000000
[    0.001210] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001456] total RAM covered: 3071M
[    0.001532] Found optimal setting for mtrr clean up
[    0.001533]  gran_size: 64K 	chunk_size: 64M 	num_reg: 3  	lose cover RAM: 0G
[    0.001624] e820: update [mem 0xbd540000-0xbd54ffff] usable ==> reserved
[    0.001629] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.001632] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.004152] Using GB pages for direct mapping
[    0.004437] RAMDISK: [mem 0x36fe9000-0x377ebfff]
[    0.004440] ACPI: Early table checksum verification disabled
[    0.004442] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.004445] ACPI: XSDT 0x00000000BD119728 0000D4 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004449] ACPI: FACP 0x00000000BCA9A000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.004453] ACPI: DSDT 0x00000000BCA78000 0067B6 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.004454] ACPI: FACS 0x00000000BD114000 000040
[    0.004456] ACPI: SSDT 0x00000000BCAA9000 0094D5 (v01 GBT    GSWApp   00000001 INTL 20190509)
[    0.004457] ACPI: SSDT 0x00000000BCAA0000 008C98 (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.004459] ACPI: SSDT 0x00000000BCA9C000 003C9A (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.004460] ACPI: SSDT 0x00000000BCA9B000 0001AD (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.004462] ACPI: FIDT 0x00000000BCA93000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004463] ACPI: MCFG 0x00000000BCA92000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.004465] ACPI: HPET 0x00000000BCA91000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.004466] ACPI: IVRS 0x00000000BCA90000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.004467] ACPI: PCCT 0x00000000BCA8E000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.004469] ACPI: SSDT 0x00000000BCA8B000 002FDD (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.004470] ACPI: CRAT 0x00000000BCA8A000 000B18 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.004472] ACPI: CDIT 0x00000000BCA89000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.004473] ACPI: SSDT 0x00000000BCA88000 0005F6 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.004474] ACPI: SSDT 0x00000000BCA86000 0014FD (v01 AMD    ArticTPX 00000001 INTL 20190509)
[    0.004476] ACPI: SSDT 0x00000000BCA85000 000788 (v01 AMD    ArticNOI 00000001 INTL 20190509)
[    0.004477] ACPI: SSDT 0x00000000BCA81000 003A59 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.004479] ACPI: APIC 0x00000000BCA7F000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.004480] ACPI: SSDT 0x00000000BCA98000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.004481] ACPI: SSDT 0x00000000BCA97000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.004483] ACPI: FPDT 0x00000000BCA96000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004484] ACPI: WSMT 0x00000000BCA95000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004485] ACPI: Reserving FACP table memory at [mem 0xbca9a000-0xbca9a113]
[    0.004486] ACPI: Reserving DSDT table memory at [mem 0xbca78000-0xbca7e7b5]
[    0.004487] ACPI: Reserving FACS table memory at [mem 0xbd114000-0xbd11403f]
[    0.004487] ACPI: Reserving SSDT table memory at [mem 0xbcaa9000-0xbcab24d4]
[    0.004488] ACPI: Reserving SSDT table memory at [mem 0xbcaa0000-0xbcaa8c97]
[    0.004488] ACPI: Reserving SSDT table memory at [mem 0xbca9c000-0xbca9fc99]
[    0.004488] ACPI: Reserving SSDT table memory at [mem 0xbca9b000-0xbca9b1ac]
[    0.004489] ACPI: Reserving FIDT table memory at [mem 0xbca93000-0xbca9309b]
[    0.004489] ACPI: Reserving MCFG table memory at [mem 0xbca92000-0xbca9203b]
[    0.004490] ACPI: Reserving HPET table memory at [mem 0xbca91000-0xbca91037]
[    0.004490] ACPI: Reserving IVRS table memory at [mem 0xbca90000-0xbca900cf]
[    0.004491] ACPI: Reserving PCCT table memory at [mem 0xbca8e000-0xbca8e06d]
[    0.004491] ACPI: Reserving SSDT table memory at [mem 0xbca8b000-0xbca8dfdc]
[    0.004491] ACPI: Reserving CRAT table memory at [mem 0xbca8a000-0xbca8ab17]
[    0.004492] ACPI: Reserving CDIT table memory at [mem 0xbca89000-0xbca89028]
[    0.004492] ACPI: Reserving SSDT table memory at [mem 0xbca88000-0xbca885f5]
[    0.004493] ACPI: Reserving SSDT table memory at [mem 0xbca86000-0xbca874fc]
[    0.004493] ACPI: Reserving SSDT table memory at [mem 0xbca85000-0xbca85787]
[    0.004494] ACPI: Reserving SSDT table memory at [mem 0xbca81000-0xbca84a58]
[    0.004494] ACPI: Reserving APIC table memory at [mem 0xbca7f000-0xbca7f15d]
[    0.004495] ACPI: Reserving SSDT table memory at [mem 0xbca98000-0xbca9947e]
[    0.004495] ACPI: Reserving SSDT table memory at [mem 0xbca97000-0xbca970be]
[    0.004496] ACPI: Reserving FPDT table memory at [mem 0xbca96000-0xbca96043]
[    0.004496] ACPI: Reserving WSMT table memory at [mem 0xbca95000-0xbca95027]
[    0.004540] No NUMA configuration found
[    0.004541] Faking a node at [mem 0x0000000000000000-0x000000083f37ffff]
[    0.004543] NODE_DATA(0) allocated [mem 0x83f37c000-0x83f37ffff]
[    0.004568] Zone ranges:
[    0.004568]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.004569]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.004570]   Normal   [mem 0x0000000100000000-0x000000083f37ffff]
[    0.004571]   Device   empty
[    0.004571] Movable zone start for each node
[    0.004572] Early memory node ranges
[    0.004572]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.004573]   node   0: [mem 0x0000000000100000-0x0000000009c1efff]
[    0.004573]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.004574]   node   0: [mem 0x000000000a20e000-0x000000000affffff]
[    0.004574]   node   0: [mem 0x000000000b020000-0x00000000bc734fff]
[    0.004575]   node   0: [mem 0x00000000bddff000-0x00000000beffffff]
[    0.004575]   node   0: [mem 0x0000000100000000-0x000000083f37ffff]
[    0.004577] Initmem setup node 0 [mem 0x0000000000001000-0x000000083f37ffff]
[    0.004580] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.004590] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.004675] On node 0, zone DMA32: 993 pages in unavailable ranges
[    0.004684] On node 0, zone DMA32: 14 pages in unavailable ranges
[    0.006904] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.006953] On node 0, zone DMA32: 5834 pages in unavailable ranges
[    0.042020] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.042039] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.042430] ACPI: PM-Timer IO Port: 0x808
[    0.042436] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.042448] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.042453] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.042455] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.042456] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.042458] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.042459] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.042462] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[    0.042480] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.042482] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.042482] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.042482] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.042483] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.042484] PM: hibernation: Registered nosave memory: [mem 0x09c1f000-0x09ffffff]
[    0.042485] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20dfff]
[    0.042485] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.042486] PM: hibernation: Registered nosave memory: [mem 0xbc735000-0xbca6bfff]
[    0.042487] PM: hibernation: Registered nosave memory: [mem 0xbca6c000-0xbcab2fff]
[    0.042487] PM: hibernation: Registered nosave memory: [mem 0xbcab3000-0xbd130fff]
[    0.042487] PM: hibernation: Registered nosave memory: [mem 0xbd131000-0xbddfefff]
[    0.042488] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.042489] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.042489] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.042489] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
[    0.042490] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[    0.042490] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff]
[    0.042490] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd7fffff]
[    0.042491] PM: hibernation: Registered nosave memory: [mem 0xfd800000-0xfe9fffff]
[    0.042491] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.042491] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.042492] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.042492] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.042492] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.042492] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.042493] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.042493] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.042493] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.042494] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.042494] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.042494] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.042495] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.042495] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.042495] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.042496] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.042496] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.042496] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.042497] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.042498] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.042498] Booting paravirtualized kernel on bare hardware
[    0.042500] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.044996] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1
[    0.045927] percpu: Embedded 53 pages/cpu s180224 r8192 d28672 u262144
[    0.045932] pcpu-alloc: s180224 r8192 d28672 u262144 alloc=1*2097152
[    0.045933] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.045938] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
[    0.045957] Built 1 zonelists, mobility grouping on.  Total pages: 8243332
[    0.045958] Policy zone: Normal
[    0.045959] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8b90b3e6-d80e-445d-adf5-cc65a591b835 rw rootflags=subvol=root loglevel=3 quiet
[    0.045994] Unknown command line parameters: BOOT_IMAGE=/vmlinuz-linux
[    0.045994] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.045995] printk: log_buf_len total cpu_extra contributions: 126976 bytes
[    0.045995] printk: log_buf_len min size: 131072 bytes
[    0.046132] printk: log_buf_len: 262144 bytes
[    0.046133] printk: early log buf free: 116408(88%)
[    0.048104] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.049204] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.049382] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[    0.101394] Memory: 32797404K/33497356K available (14344K kernel code, 2070K rwdata, 10772K rodata, 1832K init, 3876K bss, 699692K reserved, 0K cma-reserved)
[    0.101399] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0
[    0.101478] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.101486] ftrace: allocating 44240 entries in 173 pages
[    0.112301] ftrace: allocated 173 pages with 5 groups
[    0.112401] rcu: Preemptible hierarchical RCU implementation.
[    0.112402] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.112403] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
[    0.112403] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.112404] 	Trampoline variant of Tasks RCU enabled.
[    0.112404] 	Rude variant of Tasks RCU enabled.
[    0.112405] 	Tracing variant of Tasks RCU enabled.
[    0.112405] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.112406] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.114225] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
[    0.114454] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.114556] spurious 8259A interrupt: IRQ7.
[    0.114566] Console: colour dummy device 80x25
[    0.114574] printk: console [tty0] enabled
[    0.114589] ACPI: Core revision 20210730
[    0.114695] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.114710] APIC: Switch to symmetric I/O mode setup
[    0.434943] Switched APIC routing to physical flat.
[    0.435570] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.451372] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6a77ca17184, max_idle_ns: 881590907134 ns
[    0.451375] Calibrating delay loop (skipped), value calculated using timer frequency.. 7389.97 BogoMIPS (lpj=12310353)
[    0.451377] pid_max: default: 32768 minimum: 301
[    0.451394] LSM: Security Framework initializing
[    0.451399] landlock: Up and running.
[    0.451400] Yama: becoming mindful.
[    0.451403] LSM support for eBPF active
[    0.451441] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.451480] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.451642] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.451676] LVT offset 1 assigned for vector 0xf9
[    0.451830] LVT offset 2 assigned for vector 0xf4
[    0.451872] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[    0.451872] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.451874] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.451875] Spectre V2 : Mitigation: Full AMD retpoline
[    0.451875] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.451876] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.451877] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.451877] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.451878] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.453818] Freeing SMP alternatives memory: 36K
[    0.563117] smpboot: CPU0: AMD Ryzen 5 5600X 6-Core Processor (family: 0x19, model: 0x21, stepping: 0x0)
[    0.563196] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.563199] ... version:                0
[    0.563200] ... bit width:              48
[    0.563200] ... generic registers:      6
[    0.563200] ... value mask:             0000ffffffffffff
[    0.563201] ... max period:             00007fffffffffff
[    0.563201] ... fixed-purpose events:   0
[    0.563201] ... event mask:             000000000000003f
[    0.563237] rcu: Hierarchical SRCU implementation.
[    0.563475] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.563609] smp: Bringing up secondary CPUs ...
[    0.563666] x86: Booting SMP configuration:
[    0.563666] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6
[    0.574757] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.574790]   #7  #8  #9 #10 #11
[    0.586860] smp: Brought up 1 node, 12 CPUs
[    0.586860] smpboot: Max logical packages: 3
[    0.586860] smpboot: Total of 12 processors activated (88670.64 BogoMIPS)
[    0.588345] devtmpfs: initialized
[    0.588345] x86/mm: Memory block size: 128MB
[    0.588817] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20dfff] (57344 bytes)
[    0.588817] ACPI: PM: Registering ACPI NVS region [mem 0xbcab3000-0xbd130fff] (6807552 bytes)
[    0.588817] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.588817] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.588817] pinctrl core: initialized pinctrl subsystem
[    0.588817] PM: RTC time: 21:03:14, date: 2021-11-16
[    0.588817] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.588817] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.588817] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.588869] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.588874] audit: initializing netlink subsys (disabled)
[    0.588878] audit: type=2000 audit(1637096593.156:1): state=initialized audit_enabled=0 res=1
[    0.588878] thermal_sys: Registered thermal governor 'fair_share'
[    0.588878] thermal_sys: Registered thermal governor 'bang_bang'
[    0.588878] thermal_sys: Registered thermal governor 'step_wise'
[    0.588878] thermal_sys: Registered thermal governor 'user_space'
[    0.588878] thermal_sys: Registered thermal governor 'power_allocator'
[    0.588878] cpuidle: using governor ladder
[    0.588878] cpuidle: using governor menu
[    0.588878] Detected 1 PCC Subspaces
[    0.588878] Registering PCC driver as Mailbox controller
[    0.588878] HugeTLB: can free 4094 vmemmap pages for hugepages-1048576kB
[    0.588878] ACPI: bus type PCI registered
[    0.588878] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.588878] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.588878] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.588878] PCI: Using configuration type 1 for base access
[    0.591521] Kprobes globally optimized
[    0.591524] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[    0.591524] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.591524] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.591524] ACPI: Added _OSI(Module Device)
[    0.591524] ACPI: Added _OSI(Processor Device)
[    0.591524] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.591524] ACPI: Added _OSI(Processor Aggregator Device)
[    0.591524] ACPI: Added _OSI(Linux-Dell-Video)
[    0.591524] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.591524] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.602224] ACPI: 12 ACPI AML tables successfully acquired and loaded
[    0.603219] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.610501] ACPI: Interpreter enabled
[    0.610511] ACPI: PM: (supports S0 S3 S4 S5)
[    0.610512] ACPI: Using IOAPIC for interrupt routing
[    0.610711] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.610989] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.616445] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.616449] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.616594] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.616600] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.616827] PCI host bridge to bus 0000:00
[    0.616828] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.616829] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.616830] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.616830] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.616831] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.616831] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.616832] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.616832] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.616833] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.616878] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[    0.616985] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
[    0.617078] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[    0.617182] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
[    0.617254] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.617373] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
[    0.617399] pci 0000:00:01.2: enabling Extended Tags
[    0.617448] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.617543] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[    0.617627] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[    0.617728] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[    0.617799] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.618166] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[    0.618252] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[    0.618336] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[    0.618435] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[    0.618460] pci 0000:00:07.1: enabling Extended Tags
[    0.618500] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.618588] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[    0.618688] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[    0.618714] pci 0000:00:08.1: enabling Extended Tags
[    0.618757] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.618878] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.619005] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.619121] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[    0.619176] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[    0.619231] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[    0.619287] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[    0.619342] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[    0.619397] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[    0.619453] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[    0.619508] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[    0.619597] pci 0000:01:00.0: [144d:a80a] type 00 class 0x010802
[    0.619614] pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
[    0.619809] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.619813] pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.619871] pci 0000:02:00.0: [1022:43ee] type 00 class 0x0c0330
[    0.619889] pci 0000:02:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit]
[    0.619932] pci 0000:02:00.0: enabling Extended Tags
[    0.619991] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.620079] pci 0000:02:00.1: [1022:43eb] type 00 class 0x010601
[    0.620130] pci 0000:02:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff]
[    0.620138] pci 0000:02:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref]
[    0.620144] pci 0000:02:00.1: enabling Extended Tags
[    0.620190] pci 0000:02:00.1: PME# supported from D3hot D3cold
[    0.620255] pci 0000:02:00.2: [1022:43e9] type 01 class 0x060400
[    0.620302] pci 0000:02:00.2: enabling Extended Tags
[    0.620353] pci 0000:02:00.2: PME# supported from D3hot D3cold
[    0.620413] pci 0000:00:01.2: PCI bridge to [bus 02-05]
[    0.620416] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.620417] pci 0000:00:01.2:   bridge window [mem 0xfcb00000-0xfcdfffff]
[    0.620525] pci 0000:03:08.0: [1022:43ea] type 01 class 0x060400
[    0.620576] pci 0000:03:08.0: enabling Extended Tags
[    0.620630] pci 0000:03:08.0: PME# supported from D3hot D3cold
[    0.620722] pci 0000:03:09.0: [1022:43ea] type 01 class 0x060400
[    0.620773] pci 0000:03:09.0: enabling Extended Tags
[    0.620828] pci 0000:03:09.0: PME# supported from D3hot D3cold
[    0.620910] pci 0000:02:00.2: PCI bridge to [bus 03-05]
[    0.620915] pci 0000:02:00.2:   bridge window [io  0xf000-0xffff]
[    0.620917] pci 0000:02:00.2:   bridge window [mem 0xfcb00000-0xfccfffff]
[    0.621020] pci 0000:04:00.0: [10ec:8125] type 00 class 0x020000
[    0.621044] pci 0000:04:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.621078] pci 0000:04:00.0: reg 0x18: [mem 0xfcc00000-0xfcc0ffff 64bit]
[    0.621099] pci 0000:04:00.0: reg 0x20: [mem 0xfcc10000-0xfcc13fff 64bit]
[    0.621250] pci 0000:04:00.0: supports D1 D2
[    0.621250] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.621424] pci 0000:03:08.0: PCI bridge to [bus 04]
[    0.621429] pci 0000:03:08.0:   bridge window [io  0xf000-0xffff]
[    0.621432] pci 0000:03:08.0:   bridge window [mem 0xfcc00000-0xfccfffff]
[    0.621505] pci 0000:05:00.0: [8086:2526] type 00 class 0x028000
[    0.621540] pci 0000:05:00.0: reg 0x10: [mem 0xfcb00000-0xfcb03fff 64bit]
[    0.621724] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.621861] pci 0000:03:09.0: PCI bridge to [bus 05]
[    0.621868] pci 0000:03:09.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.621947] pci 0000:06:00.0: [1002:699f] type 00 class 0x030000
[    0.621964] pci 0000:06:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.621976] pci 0000:06:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.621983] pci 0000:06:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.621990] pci 0000:06:00.0: reg 0x24: [mem 0xfce00000-0xfce3ffff]
[    0.621997] pci 0000:06:00.0: reg 0x30: [mem 0xfce40000-0xfce5ffff pref]
[    0.622083] pci 0000:06:00.0: supports D1 D2
[    0.622084] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.622199] pci 0000:06:00.1: [1002:aae0] type 00 class 0x040300
[    0.622216] pci 0000:06:00.1: reg 0x10: [mem 0xfce60000-0xfce63fff 64bit]
[    0.622308] pci 0000:06:00.1: supports D1 D2
[    0.622388] pci 0000:00:03.1: PCI bridge to [bus 06]
[    0.622391] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.622392] pci 0000:00:03.1:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.622395] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.622433] pci 0000:07:00.0: [1022:148a] type 00 class 0x130000
[    0.622470] pci 0000:07:00.0: enabling Extended Tags
[    0.622573] pci 0000:00:07.1: PCI bridge to [bus 07]
[    0.622627] pci 0000:08:00.0: [1022:1485] type 00 class 0x130000
[    0.622671] pci 0000:08:00.0: enabling Extended Tags
[    0.622788] pci 0000:08:00.1: [1022:1486] type 00 class 0x108000
[    0.622808] pci 0000:08:00.1: reg 0x18: [mem 0xfc900000-0xfc9fffff]
[    0.622824] pci 0000:08:00.1: reg 0x24: [mem 0xfca08000-0xfca09fff]
[    0.622833] pci 0000:08:00.1: enabling Extended Tags
[    0.622939] pci 0000:08:00.3: [1022:149c] type 00 class 0x0c0330
[    0.622952] pci 0000:08:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit]
[    0.622982] pci 0000:08:00.3: enabling Extended Tags
[    0.623028] pci 0000:08:00.3: PME# supported from D0 D3hot D3cold
[    0.623098] pci 0000:08:00.4: [1022:1487] type 00 class 0x040300
[    0.623108] pci 0000:08:00.4: reg 0x10: [mem 0xfca00000-0xfca07fff]
[    0.623143] pci 0000:08:00.4: enabling Extended Tags
[    0.623186] pci 0000:08:00.4: PME# supported from D0 D3hot D3cold
[    0.623256] pci 0000:00:08.1: PCI bridge to [bus 08]
[    0.623260] pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfcafffff]
[    0.623446] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.623483] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.623513] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.623551] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.623585] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.623613] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.623641] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.623669] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.624122] iommu: Default domain type: Translated 
[    0.624123] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.624129] pci 0000:06:00.0: vgaarb: setting as boot VGA device
[    0.624129] pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.624129] pci 0000:06:00.0: vgaarb: bridge control possible
[    0.624129] vgaarb: loaded
[    0.624129] SCSI subsystem initialized
[    0.624129] libata version 3.00 loaded.
[    0.624129] ACPI: bus type USB registered
[    0.624129] usbcore: registered new interface driver usbfs
[    0.624129] usbcore: registered new interface driver hub
[    0.624129] usbcore: registered new device driver usb
[    0.624129] pps_core: LinuxPPS API ver. 1 registered
[    0.624129] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.624129] PTP clock support registered
[    0.624129] EDAC MC: Ver: 3.0.0
[    0.624129] NetLabel: Initializing
[    0.624129] NetLabel:  domain hash size = 128
[    0.624129] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.624129] NetLabel:  unlabeled traffic allowed by default
[    0.624129] PCI: Using ACPI for IRQ routing
[    0.628467] PCI: pci_cache_line_size set to 64 bytes
[    0.628527] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.628528] e820: reserve RAM buffer [mem 0x09c1f000-0x0bffffff]
[    0.628529] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.628530] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.628530] e820: reserve RAM buffer [mem 0xbc735000-0xbfffffff]
[    0.628531] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.628531] e820: reserve RAM buffer [mem 0x83f380000-0x83fffffff]
[    0.628534] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.628534] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.630270] clocksource: Switched to clocksource tsc-early
[    0.632522] VFS: Disk quotas dquot_6.6.0
[    0.632531] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.632567] pnp: PnP ACPI init
[    0.632618] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.632654] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
[    0.632773] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.632774] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.632775] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.632776] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.632915] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.632916] system 00:04: [io  0x040b] has been reserved
[    0.632917] system 00:04: [io  0x04d6] has been reserved
[    0.632917] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.632918] system 00:04: [io  0x0c14] has been reserved
[    0.632918] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.632919] system 00:04: [io  0x0c52] has been reserved
[    0.632920] system 00:04: [io  0x0c6c] has been reserved
[    0.632920] system 00:04: [io  0x0c6f] has been reserved
[    0.632921] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.632921] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.632922] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.632923] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.632923] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.632924] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.632925] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.632925] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.632927] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.632927] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.632928] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.632929] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.632930] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.633301] pnp: PnP ACPI: found 5 devices
[    0.638408] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.638444] NET: Registered PF_INET protocol family
[    0.638589] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.639484] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.639642] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.639818] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.639868] TCP: Hash tables configured (established 262144 bind 65536)
[    0.639972] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.640029] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.640089] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.640150] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.640153] NET: Registered PF_XDP protocol family
[    0.640159] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.640163] pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.640168] pci 0000:03:08.0: PCI bridge to [bus 04]
[    0.640169] pci 0000:03:08.0:   bridge window [io  0xf000-0xffff]
[    0.640173] pci 0000:03:08.0:   bridge window [mem 0xfcc00000-0xfccfffff]
[    0.640180] pci 0000:03:09.0: PCI bridge to [bus 05]
[    0.640184] pci 0000:03:09.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.640191] pci 0000:02:00.2: PCI bridge to [bus 03-05]
[    0.640193] pci 0000:02:00.2:   bridge window [io  0xf000-0xffff]
[    0.640196] pci 0000:02:00.2:   bridge window [mem 0xfcb00000-0xfccfffff]
[    0.640203] pci 0000:00:01.2: PCI bridge to [bus 02-05]
[    0.640204] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.640207] pci 0000:00:01.2:   bridge window [mem 0xfcb00000-0xfcdfffff]
[    0.640211] pci 0000:00:03.1: PCI bridge to [bus 06]
[    0.640212] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.640214] pci 0000:00:03.1:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.640216] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.640219] pci 0000:00:07.1: PCI bridge to [bus 07]
[    0.640225] pci 0000:00:08.1: PCI bridge to [bus 08]
[    0.640227] pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfcafffff]
[    0.640232] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.640232] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.640233] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.640233] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.640234] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.640235] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.640235] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfec2ffff window]
[    0.640236] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.640236] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.640237] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.640237] pci_bus 0000:02: resource 1 [mem 0xfcb00000-0xfcdfffff]
[    0.640238] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.640239] pci_bus 0000:03: resource 1 [mem 0xfcb00000-0xfccfffff]
[    0.640239] pci_bus 0000:04: resource 0 [io  0xf000-0xffff]
[    0.640240] pci_bus 0000:04: resource 1 [mem 0xfcc00000-0xfccfffff]
[    0.640240] pci_bus 0000:05: resource 1 [mem 0xfcb00000-0xfcbfffff]
[    0.640241] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
[    0.640241] pci_bus 0000:06: resource 1 [mem 0xfce00000-0xfcefffff]
[    0.640242] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.640242] pci_bus 0000:08: resource 1 [mem 0xfc800000-0xfcafffff]
[    0.640379] pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.640390] pci 0000:06:00.1: D0 power state depends on 0000:06:00.0
[    0.640512] PCI: CLS 64 bytes, default 64
[    0.640518] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.640538] pci 0000:00:01.0: Adding to iommu group 0
[    0.640543] pci 0000:00:01.1: Adding to iommu group 1
[    0.640546] Trying to unpack rootfs image as initramfs...
[    0.640548] pci 0000:00:01.2: Adding to iommu group 2
[    0.640553] pci 0000:00:02.0: Adding to iommu group 3
[    0.640559] pci 0000:00:03.0: Adding to iommu group 4
[    0.640563] pci 0000:00:03.1: Adding to iommu group 5
[    0.640568] pci 0000:00:04.0: Adding to iommu group 6
[    0.640573] pci 0000:00:05.0: Adding to iommu group 7
[    0.640578] pci 0000:00:07.0: Adding to iommu group 8
[    0.640584] pci 0000:00:07.1: Adding to iommu group 9
[    0.640589] pci 0000:00:08.0: Adding to iommu group 10
[    0.640594] pci 0000:00:08.1: Adding to iommu group 11
[    0.640600] pci 0000:00:14.0: Adding to iommu group 12
[    0.640604] pci 0000:00:14.3: Adding to iommu group 12
[    0.640622] pci 0000:00:18.0: Adding to iommu group 13
[    0.640626] pci 0000:00:18.1: Adding to iommu group 13
[    0.640630] pci 0000:00:18.2: Adding to iommu group 13
[    0.640633] pci 0000:00:18.3: Adding to iommu group 13
[    0.640637] pci 0000:00:18.4: Adding to iommu group 13
[    0.640641] pci 0000:00:18.5: Adding to iommu group 13
[    0.640644] pci 0000:00:18.6: Adding to iommu group 13
[    0.640648] pci 0000:00:18.7: Adding to iommu group 13
[    0.640653] pci 0000:01:00.0: Adding to iommu group 14
[    0.640662] pci 0000:02:00.0: Adding to iommu group 15
[    0.640667] pci 0000:02:00.1: Adding to iommu group 15
[    0.640672] pci 0000:02:00.2: Adding to iommu group 15
[    0.640674] pci 0000:03:08.0: Adding to iommu group 15
[    0.640676] pci 0000:03:09.0: Adding to iommu group 15
[    0.640678] pci 0000:04:00.0: Adding to iommu group 15
[    0.640680] pci 0000:05:00.0: Adding to iommu group 15
[    0.640700] pci 0000:06:00.0: Adding to iommu group 16
[    0.640705] pci 0000:06:00.1: Adding to iommu group 16
[    0.640710] pci 0000:07:00.0: Adding to iommu group 17
[    0.640717] pci 0000:08:00.0: Adding to iommu group 18
[    0.640724] pci 0000:08:00.1: Adding to iommu group 19
[    0.640731] pci 0000:08:00.3: Adding to iommu group 20
[    0.640736] pci 0000:08:00.4: Adding to iommu group 21
[    0.643643] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.643645] AMD-Vi: Extended features (0x58f77ef22294a5a): PPR NX GT IA PC GA_vAPIC
[    0.643648] AMD-Vi: Interrupt remapping enabled
[    0.643714] software IO TLB: tearing down default memory pool
[    0.644122] LVT offset 0 assigned for vector 0x400
[    0.644406] perf: AMD IBS detected (0x000003ff)
[    0.644411] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.645190] Initialise system trusted keyrings
[    0.645197] Key type blacklist registered
[    0.645217] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.645688] zbud: loaded
[    0.648041] Key type asymmetric registered
[    0.648042] Asymmetric key parser 'x509' registered
[    0.648051] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.648075] io scheduler mq-deadline registered
[    0.648075] io scheduler kyber registered
[    0.648090] io scheduler bfq registered
[    0.648244] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[    0.648284] pcieport 0000:00:01.1: AER: enabled with IRQ 26
[    0.648380] pcieport 0000:00:01.2: PME: Signaling with IRQ 27
[    0.648417] pcieport 0000:00:01.2: AER: enabled with IRQ 27
[    0.648512] pcieport 0000:00:03.1: PME: Signaling with IRQ 28
[    0.648542] pcieport 0000:00:03.1: AER: enabled with IRQ 28
[    0.648688] pcieport 0000:00:07.1: PME: Signaling with IRQ 30
[    0.648721] pcieport 0000:00:07.1: AER: enabled with IRQ 30
[    0.648807] pcieport 0000:00:08.1: PME: Signaling with IRQ 31
[    0.648838] pcieport 0000:00:08.1: AER: enabled with IRQ 31
[    0.649234] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.649312] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.649324] ACPI: button: Power Button [PWRB]
[    0.649342] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.650632] ACPI: button: Power Button [PWRF]
[    0.653966] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1155
[    0.653978] Monitor-Mwait will be used to enter C-1 state
[    0.653982] ACPI: \_SB_.PLTF.C000: Found 2 idle states
[    0.656211] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[    0.656286] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[    0.656347] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[    0.656395] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[    0.656441] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[    0.656507] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[    0.656615] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[    0.656674] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[    0.656735] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[    0.656793] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[    0.656856] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[    0.656986] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.657533] Non-volatile memory driver v1.3
[    0.657534] Linux agpgart interface v0.103
[    0.657534] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.657943] nvme nvme0: pci function 0000:01:00.0
[    0.657969] ahci 0000:02:00.1: version 3.0
[    0.658072] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[    0.658131] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.658132] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.658357] scsi host0: ahci
[    0.658414] scsi host1: ahci
[    0.658447] scsi host2: ahci
[    0.658481] scsi host3: ahci
[    0.658514] scsi host4: ahci
[    0.658548] scsi host5: ahci
[    0.658564] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 40
[    0.658566] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 40
[    0.658568] ata3: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80200 irq 40
[    0.658569] ata4: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80280 irq 40
[    0.658571] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 40
[    0.658572] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 40
[    0.658601] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.658604] ehci-pci: EHCI PCI platform driver
[    0.658611] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.658613] ohci-pci: OHCI PCI platform driver
[    0.658619] uhci_hcd: USB Universal Host Controller Interface driver
[    0.658642] usbcore: registered new interface driver usbserial_generic
[    0.658645] usbserial: USB Serial support registered for generic
[    0.658687] rtc_cmos 00:02: RTC can wake from S4
[    0.658848] rtc_cmos 00:02: registered as rtc0
[    0.658877] rtc_cmos 00:02: setting system clock to 2021-11-16T21:03:14 UTC (1637096594)
[    0.658884] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.658948] ledtrig-cpu: registered to indicate activity on CPUs
[    0.659024] vesafb: mode is 3840x2160x32, linelength=15360, pages=0
[    0.659025] vesafb: scrolling: redraw
[    0.659025] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.659030] vesafb: framebuffer at 0xd0000000, mapped to 0x00000000068f9898, using 32448k, total 32448k
[    0.659046] fbcon: Deferring console take-over
[    0.659046] fb0: VESA VGA frame buffer device
[    0.659052] hid: raw HID events driver (C) Jiri Kosina
[    0.659088] drop_monitor: Initializing network drop monitor service
[    0.659122] Initializing XFRM netlink socket
[    0.659162] NET: Registered PF_INET6 protocol family
[    0.661491] Freeing initrd memory: 8204K
[    0.663401] Segment Routing with IPv6
[    0.663402] RPL Segment Routing with IPv6
[    0.663405] In-situ OAM (IOAM) with IPv6
[    0.663417] NET: Registered PF_PACKET protocol family
[    0.663848] microcode: CPU0: patch_level=0x0a201009
[    0.663851] microcode: CPU1: patch_level=0x0a201009
[    0.663857] microcode: CPU2: patch_level=0x0a201009
[    0.663862] microcode: CPU3: patch_level=0x0a201009
[    0.663867] microcode: CPU4: patch_level=0x0a201009
[    0.663873] microcode: CPU5: patch_level=0x0a201009
[    0.663875] microcode: CPU6: patch_level=0x0a201009
[    0.663880] microcode: CPU7: patch_level=0x0a201009
[    0.663884] microcode: CPU8: patch_level=0x0a201009
[    0.663888] microcode: CPU9: patch_level=0x0a201009
[    0.663893] microcode: CPU10: patch_level=0x0a201009
[    0.663897] microcode: CPU11: patch_level=0x0a201009
[    0.663899] microcode: Microcode Update Driver: v2.2.
[    0.663972] resctrl: L3 allocation detected
[    0.663972] resctrl: MB allocation detected
[    0.663973] resctrl: L3 monitoring detected
[    0.663974] IPI shorthand broadcast: enabled
[    0.663981] sched_clock: Marking stable (346998500, 316968436)->(711778376, -47811440)
[    0.664175] registered taskstats version 1
[    0.664298] Loading compiled-in X.509 certificates
[    0.665820] Loaded X.509 cert 'Build time autogenerated kernel key: ac48247ae4b694dd45afa078318e6038d5aa91dc'
[    0.666546] zswap: loaded using pool lz4/z3fold
[    0.666900] Key type ._fscrypt registered
[    0.666901] Key type .fscrypt registered
[    0.666901] Key type fscrypt-provisioning registered
[    0.667110] PM:   Magic number: 13:973:95
[    0.667161] memory memory248: hash matches
[    0.667243] RAS: Correctable Errors collector initialized.
[    0.672378] nvme nvme0: Shutdown timeout set to 10 seconds
[    0.678456] nvme nvme0: 32/0/0 default/read/poll queues
[    0.680809]  nvme0n1: p1 p2
[    0.974029] ata1: SATA link down (SStatus 0 SControl 300)
[    1.454974] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.457140] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100
[    1.457958] ata2.00: configured for UDMA/100
[    1.459568] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB00 PQ: 0 ANSI: 5
[    1.654973] tsc: Refined TSC clocksource calibration: 3693.059 MHz
[    1.654981] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a77744cfd5, max_idle_ns: 881590969987 ns
[    1.655019] clocksource: Switched to clocksource tsc
[    1.820768] ata3: SATA link down (SStatus 0 SControl 300)
[    2.134277] ata4: SATA link down (SStatus 0 SControl 300)
[    2.447502] ata5: SATA link down (SStatus 0 SControl 330)
[    3.481634] ata6: failed to resume link (SControl 0)
[    3.481654] ata6: SATA link down (SStatus 0 SControl 0)
[    3.482287] Freeing unused decrypted memory: 2036K
[    3.482481] Freeing unused kernel image (initmem) memory: 1832K
[    3.482483] Write protecting the kernel read-only data: 28672k
[    3.482805] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    3.482973] Freeing unused kernel image (rodata/data gap) memory: 1516K
[    3.503940] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.503943] rodata_test: all tests were successful
[    3.503946] Run /init as init process
[    3.503947]   with arguments:
[    3.503948]     /init
[    3.503948]   with environment:
[    3.503949]     HOME=/
[    3.503949]     TERM=linux
[    3.503949]     BOOT_IMAGE=/vmlinuz-linux
[    3.510146] fbcon: Taking over console
[    3.510194] Console: switching to colour frame buffer device 240x67
[    3.769347] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.769354] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    3.773910] raid6: skip pq benchmark and using algorithm avx2x4
[    3.773911] raid6: using avx2x2 recovery algorithm
[    3.775719] xor: automatically using best checksumming function   avx       
[    3.805704] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.805706] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.819140] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[    3.819428] BTRFS: device fsid 8b90b3e6-d80e-445d-adf5-cc65a591b835 devid 1 transid 2987 /dev/nvme0n1p2 scanned by systemd-udevd (259)
[    3.824826] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    3.825111] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.825112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.825113] usb usb1: Product: xHCI Host Controller
[    3.825114] usb usb1: Manufacturer: Linux 5.15.2-arch1-1 xhci-hcd
[    3.825114] usb usb1: SerialNumber: 0000:02:00.0
[    3.825186] hub 1-0:1.0: USB hub found
[    3.825198] hub 1-0:1.0: 10 ports detected
[    3.825396] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.825397] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    3.825399] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    3.825431] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.825439] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    3.825440] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.825441] usb usb2: Product: xHCI Host Controller
[    3.825441] usb usb2: Manufacturer: Linux 5.15.2-arch1-1 xhci-hcd
[    3.825442] usb usb2: SerialNumber: 0000:02:00.0
[    3.825479] hub 2-0:1.0: USB hub found
[    3.825488] hub 2-0:1.0: 4 ports detected
[    3.825630] xhci_hcd 0000:08:00.3: xHCI Host Controller
[    3.825632] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 3
[    3.825737] xhci_hcd 0000:08:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[    3.825975] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.825976] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.825977] usb usb3: Product: xHCI Host Controller
[    3.825977] usb usb3: Manufacturer: Linux 5.15.2-arch1-1 xhci-hcd
[    3.825978] usb usb3: SerialNumber: 0000:08:00.3
[    3.826018] hub 3-0:1.0: USB hub found
[    3.826023] hub 3-0:1.0: 4 ports detected
[    3.826147] xhci_hcd 0000:08:00.3: xHCI Host Controller
[    3.826148] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 4
[    3.826149] xhci_hcd 0000:08:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    3.826156] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.826165] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    3.826165] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.826166] usb usb4: Product: xHCI Host Controller
[    3.826166] usb usb4: Manufacturer: Linux 5.15.2-arch1-1 xhci-hcd
[    3.826167] usb usb4: SerialNumber: 0000:08:00.3
[    3.826200] hub 4-0:1.0: USB hub found
[    3.826205] hub 4-0:1.0: 4 ports detected
[    3.894951] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.141396] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[    4.207842] BTRFS info (device nvme0n1p2): flagging fs with big metadata feature
[    4.207845] BTRFS info (device nvme0n1p2): disk space caching is enabled
[    4.207846] BTRFS info (device nvme0n1p2): has skinny extents
[    4.225498] random: fast init done
[    4.230659] BTRFS info (device nvme0n1p2): enabling ssd optimizations
[    4.303419] systemd[1]: systemd 249.6-3-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    4.318074] systemd[1]: Detected architecture x86-64.
[    4.318387] systemd[1]: Hostname set to <cedric>.
[    4.343098] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    4.370995] usb 1-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    4.370998] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.370999] usb 1-6: Product: USB2.0 Hub
[    4.378006] hub 1-6:1.0: USB hub found
[    4.380448] systemd[1]: Queued start job for default target Graphical Interface.
[    4.381149] systemd[1]: Created slice Slice /system/getty.
[    4.381269] systemd[1]: Created slice Slice /system/modprobe.
[    4.381425] systemd[1]: Created slice Slice /system/syslog-ng.
[    4.381525] systemd[1]: Created slice Slice /system/systemd-fsck.
[    4.381602] systemd[1]: Created slice User and Session Slice.
[    4.381630] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.381648] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.381713] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.381727] systemd[1]: Reached target Local Encrypted Volumes.
[    4.381741] systemd[1]: Reached target Remote File Systems.
[    4.381745] systemd[1]: Reached target Slice Units.
[    4.381751] systemd[1]: Reached target Swaps.
[    4.381758] systemd[1]: Reached target Local Verity Protected Volumes.
[    4.381784] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.381952] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.381986] hub 1-6:1.0: 4 ports detected
[    4.382365] systemd[1]: Listening on Process Core Dump Socket.
[    4.382421] systemd[1]: Listening on Journal Audit Socket.
[    4.382458] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.382496] systemd[1]: Listening on Journal Socket.
[    4.382764] systemd[1]: Listening on udev Control Socket.
[    4.382797] systemd[1]: Listening on udev Kernel Socket.
[    4.383090] systemd[1]: Mounting Huge Pages File System...
[    4.383403] systemd[1]: Mounting POSIX Message Queue File System...
[    4.383681] systemd[1]: Mounting Kernel Debug File System...
[    4.383996] systemd[1]: Mounting Kernel Trace File System...
[    4.384285] systemd[1]: Mounting Temporary Directory /tmp...
[    4.384628] systemd[1]: Starting Create List of Static Device Nodes...
[    4.384923] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.385207] systemd[1]: Starting Load Kernel Module configfs...
[    4.385490] systemd[1]: Starting Load Kernel Module drm...
[    4.385813] systemd[1]: Starting Load Kernel Module fuse...
[    4.386118] random: lvm: uninitialized urandom read (4 bytes read)
[    4.386125] systemd[1]: Starting Set Up Additional Binary Formats...
[    4.386836] systemd[1]: Starting Journal Service...
[    4.387301] systemd[1]: Starting Load Kernel Modules...
[    4.387626] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.387653] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    4.387972] systemd[1]: Starting Coldplug All udev Devices...
[    4.388565] systemd[1]: Mounted Huge Pages File System.
[    4.388602] systemd[1]: Mounted POSIX Message Queue File System.
[    4.388632] systemd[1]: Mounted Kernel Debug File System.
[    4.388657] systemd[1]: Mounted Kernel Trace File System.
[    4.388685] systemd[1]: Mounted Temporary Directory /tmp.
[    4.388790] systemd[1]: Finished Create List of Static Device Nodes.
[    4.388901] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.388974] systemd[1]: Finished Load Kernel Module configfs.
[    4.389064] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.389135] systemd[1]: Finished Load Kernel Module drm.
[    4.389178] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 342 (systemd-binfmt)
[    4.389532] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    4.389894] systemd[1]: Mounting Kernel Configuration File System...
[    4.390211] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    4.390807] systemd[1]: Finished Set Up Additional Binary Formats.
[    4.390858] systemd[1]: Mounted Kernel Configuration File System.
[    4.392184] fuse: init (API version 7.34)
[    4.392443] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.392533] systemd[1]: Finished Load Kernel Module fuse.
[    4.392860] systemd[1]: Mounting FUSE Control File System...
[    4.393468] systemd[1]: Mounted FUSE Control File System.
[    4.399652] vboxdrv: loading out-of-tree module taints kernel.
[    4.399762] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    4.401715] vboxdrv: Found 12 processor cores
[    4.413650] systemd[1]: Started Journal Service.
[    4.413690] audit: type=1130 audit(1637096598.249:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.424712] audit: type=1130 audit(1637096598.259:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.424825] vboxdrv: TSC mode is Invariant, tentative frequency 3693051569 Hz
[    4.424826] vboxdrv: Successfully loaded version 6.1.28 r147628 (interface 0x00320000)
[    4.427176] VBoxNetAdp: Successfully started.
[    4.428588] BTRFS info (device nvme0n1p2): use zlib compression, level 3
[    4.428592] BTRFS info (device nvme0n1p2): disk space caching is enabled
[    4.429079] audit: type=1130 audit(1637096598.266:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.430187] VBoxNetFlt: Successfully started.
[    4.430949] audit: type=1130 audit(1637096598.266:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.431697] systemd-journald[343]: Received client request to flush runtime journal.
[    4.433128] audit: type=1130 audit(1637096598.269:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.446396] audit: type=1130 audit(1637096598.282:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.446752] audit: type=1334 audit(1637096598.282:8): prog-id=14 op=LOAD
[    4.446847] audit: type=1334 audit(1637096598.282:9): prog-id=15 op=LOAD
[    4.446906] audit: type=1334 audit(1637096598.282:10): prog-id=16 op=LOAD
[    4.569254] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    4.569513] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    4.591454] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20210730/utaddress-204)
[    4.591464] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.593239] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    4.593241] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.594718] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    4.595563] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    4.595629] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    4.595635] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    4.596112] ccp 0000:08:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[    4.598574] cryptd: max_cpu_qlen set to 1000
[    4.608161] AVX2 version of gcm_enc/dec engaged.
[    4.608186] AES CTR mode by8 optimization enabled
[    4.621273] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.623410] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.623707] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.623711] cfg80211: failed to load regulatory.db
[    4.639679] libphy: r8169: probed
[    4.639863] r8169 0000:04:00.0 eth0: RTL8125B, 18:c0:4d:db:fe:78, XID 641, IRQ 94
[    4.639867] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    4.671698] Intel(R) Wireless WiFi driver for Linux
[    4.676439] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.704993] iwlwifi 0000:05:00.0: WRT: Overriding region id 0
[    4.704997] iwlwifi 0000:05:00.0: WRT: Overriding region id 1
[    4.704998] iwlwifi 0000:05:00.0: WRT: Overriding region id 2
[    4.704999] iwlwifi 0000:05:00.0: WRT: Overriding region id 3
[    4.705000] iwlwifi 0000:05:00.0: WRT: Overriding region id 4
[    4.705001] iwlwifi 0000:05:00.0: WRT: Overriding region id 6
[    4.705002] iwlwifi 0000:05:00.0: WRT: Overriding region id 8
[    4.705002] iwlwifi 0000:05:00.0: WRT: Overriding region id 9
[    4.705003] iwlwifi 0000:05:00.0: WRT: Overriding region id 10
[    4.705004] iwlwifi 0000:05:00.0: WRT: Overriding region id 11
[    4.705005] iwlwifi 0000:05:00.0: WRT: Overriding region id 15
[    4.705006] iwlwifi 0000:05:00.0: WRT: Overriding region id 16
[    4.705007] iwlwifi 0000:05:00.0: WRT: Overriding region id 18
[    4.705008] iwlwifi 0000:05:00.0: WRT: Overriding region id 19
[    4.705009] iwlwifi 0000:05:00.0: WRT: Overriding region id 20
[    4.705010] iwlwifi 0000:05:00.0: WRT: Overriding region id 21
[    4.705011] iwlwifi 0000:05:00.0: WRT: Overriding region id 28
[    4.705177] iwlwifi 0000:05:00.0: loaded firmware version 46.6b541b68.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
[    4.711063] random: dhcpcd: uninitialized urandom read (112 bytes read)
[    4.745896] snd_hda_intel 0000:06:00.1: Handle vga_switcheroo audio client
[    4.745900] snd_hda_intel 0000:06:00.1: Force to non-snoop mode
[    4.791172] r8169 0000:04:00.0 eno1: renamed from eth0
[    4.869359] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input3
[    4.869446] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input4
[    4.869485] [drm] amdgpu kernel modesetting enabled.
[    4.869513] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input5
[    4.869570] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input6
[    4.869633] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input7
[    4.874544] kvm: disabled by bios
[    4.879331] amdgpu: Ignoring ACPI CRAT on non-APU system
[    4.879334] amdgpu: Virtual CRAT table created for CPU
[    4.879342] amdgpu: Topology: Add CPU node
[    4.879401] checking generic (d0000000 1fb0000) vs hw (d0000000 10000000)
[    4.879403] fb0: switching to amdgpu from VESA VGA
[    4.879476] Console: switching to colour dummy device 80x25
[    4.879498] amdgpu 0000:06:00.0: vgaarb: deactivate vga console
[    4.879580] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1462:0x8A90 0xC7).
[    4.879583] amdgpu 0000:06:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[    4.879588] [drm] register mmio base: 0xFCE00000
[    4.879588] [drm] register mmio size: 262144
[    4.879596] [drm] add ip block number 0 <vi_common>
[    4.879597] [drm] add ip block number 1 <gmc_v8_0>
[    4.879598] [drm] add ip block number 2 <tonga_ih>
[    4.879598] [drm] add ip block number 3 <gfx_v8_0>
[    4.879599] [drm] add ip block number 4 <sdma_v3_0>
[    4.879600] [drm] add ip block number 5 <powerplay>
[    4.879600] [drm] add ip block number 6 <dm>
[    4.879601] [drm] add ip block number 7 <uvd_v6_0>
[    4.879601] [drm] add ip block number 8 <vce_v3_0>
[    4.879844] amdgpu 0000:06:00.0: No more image in the PCI ROM
[    4.879863] amdgpu 0000:06:00.0: amdgpu: Fetched VBIOS from ROM BAR
[    4.879865] amdgpu: ATOM BIOS: 113-d09001-e02
[    4.879879] [drm] UVD is enabled in VM mode
[    4.879879] [drm] UVD ENC is enabled in VM mode
[    4.879881] [drm] VCE enabled in VM mode
[    4.879904] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    4.880070] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    4.880073] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.880074] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.880075] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.880075] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    4.880076] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.880076] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.880077] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.880078] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    4.880406] amdgpu 0000:06:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[    4.880408] amdgpu 0000:06:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[    4.880413] [drm] Detected VRAM RAM=2048M, BAR=256M
[    4.880414] [drm] RAM width 128bits GDDR5
[    4.880436] [drm] amdgpu: 2048M of VRAM memory ready
[    4.880437] [drm] amdgpu: 3072M of GTT memory ready.
[    4.880439] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    4.881636] 8021q: 802.1Q VLAN Support v1.8
[    4.882966] [drm] PCIE GART of 256M enabled (table at 0x000000F401FA4000).
[    4.883650] iwlwifi 0000:05:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x324
[    4.884040] [drm] Chained IB support enabled!
[    4.886551] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[    4.887037] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    4.887926] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    4.890599] thermal thermal_zone0: failed to read out thermal zone (-61)
[    4.908540] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card1/input8
[    4.908590] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card1/input9
[    4.908618] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card1/input10
[    4.908652] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card1/input11
[    4.908694] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card1/input12
[    4.908739] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card1/input13
[    4.908785] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card1/input14
[    4.931104] iwlwifi 0000:05:00.0: base HW address: bc:17:b8:b7:ae:da
[    4.984769] usb 1-7: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    4.984772] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.984773] usb 1-7: Product: ITE Device
[    4.984774] usb 1-7: Manufacturer: ITE Tech. Inc.
[    4.989739] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[    4.989763] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[    4.989778] [drm] Display Core initialized with v3.2.149!
[    4.998133] snd_hda_intel 0000:06:00.1: bound 0000:06:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    5.024728] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[    5.025058] MCE: In-kernel MCE decoding enabled.
[    5.028667] kvm: disabled by bios
[    5.151813] [drm] UVD and UVD ENC initialized successfully.
[    5.178205] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.178266] r8169 0000:04:00.0 eno1: Link is Down
[    5.179302] kvm: disabled by bios
[    5.179553] iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0
[    5.181370] usb 1-9: new high-speed USB device number 4 using xhci_hcd
[    5.188554] intel_rapl_common: Found RAPL domain package
[    5.188556] intel_rapl_common: Found RAPL domain core
[    5.252612] [drm] VCE initialized successfully.
[    5.254075] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    5.254176] amdgpu: SRAT table not found
[    5.254177] amdgpu: Virtual CRAT table created for GPU
[    5.254201] amdgpu: Topology: Add dGPU node [0x699f:0x1002]
[    5.254202] kfd kfd: amdgpu: added device 1002:699f
[    5.254222] amdgpu 0000:06:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 5, active_cu_number 8
[    5.260044] [drm] fb mappable at 0xD24D4000
[    5.260046] [drm] vram apper at 0xD0000000
[    5.260046] [drm] size 33177600
[    5.260046] [drm] fb depth is 24
[    5.260047] [drm]    pitch is 15360
[    5.260090] fbcon: amdgpu (fb0) is primary device
[    5.312214] kvm: disabled by bios
[    5.396965] usb 1-9: New USB device found, idVendor=050d, idProduct=0234, bcdDevice= 0.00
[    5.396967] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.403964] hub 1-9:1.0: USB hub found
[    5.406944] hub 1-9:1.0: 4 ports detected
[    5.481928] kvm: disabled by bios
[    5.586539] Console: switching to colour frame buffer device 240x67
[    5.603520] amdgpu 0000:06:00.0: [drm] fb0: amdgpu frame buffer device
[    5.618020] usb 1-10: new high-speed USB device number 5 using xhci_hcd
[    5.619131] kvm: disabled by bios
[    5.625886] amdgpu 0000:06:00.0: amdgpu: Using BACO for runtime pm
[    5.626037] [drm] Initialized amdgpu 3.42.0 20150101 for 0000:06:00.0 on minor 0
[    5.807330] kvm: disabled by bios
[    5.847919] usb 1-10: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    5.847921] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.847922] usb 1-10: Product: USB2.0 Hub
[    5.856925] hub 1-10:1.0: USB hub found
[    5.860909] hub 1-10:1.0: 4 ports detected
[    5.941355] usb 1-9.2: new low-speed USB device number 6 using xhci_hcd
[    5.964831] kvm: disabled by bios
[    5.968514] hid-generic 0003:048D:5702.0001: hiddev96,hidraw0: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:02:00.0-7/input0
[    5.968531] usbcore: registered new interface driver usbhid
[    5.968532] usbhid: USB HID core driver
[    6.087136] kvm: disabled by bios
[    6.118016] random: crng init done
[    6.118017] random: 3 urandom warning(s) missed due to ratelimiting
[    6.132878] kauditd_printk_skb: 18 callbacks suppressed
[    6.132879] audit: type=1130 audit(1637096599.969:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.200893] usb 1-9.2: New USB device found, idVendor=046d, idProduct=c03e, bcdDevice=20.00
[    6.200898] usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.200899] usb 1-9.2: Product: USB-PS/2 Optical Mouse
[    6.200901] usb 1-9.2: Manufacturer: Logitech
[    6.217748] kvm: disabled by bios
[    6.234066] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C03E.0002/input/input15
[    6.234136] hid-generic 0003:046D:C03E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:02:00.0-9.2/input0
[    6.298015] usb 1-10.1: new high-speed USB device number 7 using xhci_hcd
[    6.323072] audit: type=1130 audit(1637096600.159:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=syslog-ng@default comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.556870] usb 1-10.1: New USB device found, idVendor=0bda, idProduct=525d, bcdDevice=58.01
[    6.556875] usb 1-10.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    6.556877] usb 1-10.1: Product: HK 2M CAM
[    6.556878] usb 1-10.1: Manufacturer: WDH
[    6.556879] usb 1-10.1: SerialNumber: 202001010001
[    6.648266] usb 1-9.3: new low-speed USB device number 8 using xhci_hcd
[    6.912867] usb 1-9.3: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[    6.912871] usb 1-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.912873] usb 1-9.3: Product: USB Keyboard
[    6.912874] usb 1-9.3: Manufacturer: Logitech
[    6.982144] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:046D:C31C.0003/input/input16
[    7.038153] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:02:00.0-9.3/input0
[    7.051338] usb 1-10.2: new high-speed USB device number 9 using xhci_hcd
[    7.137065] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C31C.0004/input/input17
[    7.191503] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C31C.0004/input/input18
[    7.191569] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:02:00.0-9.3/input1
[    7.223762] mousedev: PS/2 mouse device common for all mice
[    7.230046] audit: type=1130 audit(1637096601.066:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=gpm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.732840] usb 1-10.2: New USB device found, idVendor=0bda, idProduct=0151, bcdDevice=51.95
[    7.732846] usb 1-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.732848] usb 1-10.2: Product: USB2.0-CRW
[    7.732849] usb 1-10.2: Manufacturer: Generic
[    7.732850] usb 1-10.2: SerialNumber: 20060413092100000
[    7.841306] usb 1-10.4: new high-speed USB device number 10 using xhci_hcd
[    7.976813] usb 1-10.4: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[    7.976819] usb 1-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.976821] usb 1-10.4: Product: Nexcopy Device  
[    7.976822] usb 1-10.4: Manufacturer: Generic 
[    7.976823] usb 1-10.4: SerialNumber: 032019-27618
[    8.016609] mc: Linux media interface: v0.10
[    8.016704] usb-storage 1-10.2:1.0: USB Mass Storage device detected
[    8.016775] scsi host6: usb-storage 1-10.2:1.0
[    8.016824] usb-storage 1-10.4:1.0: USB Mass Storage device detected
[    8.016876] usb-storage 1-10.4:1.0: Quirks match for vid 090c pid 1000: 400
[    8.016889] scsi host7: usb-storage 1-10.4:1.0
[    8.016928] usbcore: registered new interface driver usb-storage
[    8.020423] usbcore: registered new interface driver uas
[    8.024855] videodev: Linux video capture interface: v2.00
[    8.044792] usb 1-10.1: current rate 48000 is different from the runtime rate 8000
[    8.188231] r8169 0000:04:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[    8.188247] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[    8.261070] usb 1-10.1: current rate 48000 is different from the runtime rate 16000
[    8.478027] usb 1-10.1: current rate 48000 is different from the runtime rate 44100
[    8.910782] usb 1-10.1: current rate 48000 is different from the runtime rate 8000
[    9.054949] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    9.061104] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    9.067311] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    9.073496] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    9.126778] usb 1-10.1: current rate 48000 is different from the runtime rate 16000
[    9.266190] scsi 7:0:0:0: Direct-Access     Generic  Mass Storage     1100 PQ: 0 ANSI: 6
[    9.267130] sd 6:0:0:0: [sdb] Media removed, stopped polling
[    9.267140] sd 7:0:0:0: [sda] 62914560 512-byte logical blocks: (32.2 GB/30.0 GiB)
[    9.267768] sd 7:0:0:0: [sda] Write Protect is off
[    9.267772] sd 7:0:0:0: [sda] Mode Sense: 43 00 00 00
[    9.268410] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.313002]  sda: sda1
[    9.315292] sd 7:0:0:0: [sda] Attached SCSI removable disk
[    9.343746] usb 1-10.1: current rate 48000 is different from the runtime rate 44100
[    9.813963] usbcore: registered new interface driver snd-usb-audio
[    9.817760] usb 1-10.1: Found UVC 1.00 device HK 2M CAM (0bda:525d)
[    9.876893] input: HK 2M CAM: HK 2M CAM as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-10/1-10.1/1-10.1:1.0/input/input19
[    9.876966] usbcore: registered new interface driver uvcvideo
[    9.941040] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.078739] sd 6:0:0:1: [sdc] Media removed, stopped polling
[   10.167731] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.191448] audit: type=1131 audit(1637096604.029:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.387572] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.617814] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.847791] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.077640] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.307640] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.527738] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.747737] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.874495] sd 6:0:0:2: [sdd] 0 512-byte logical blocks: (0 B/0 B)
[   11.874510] sd 6:0:0:2: [sdd] 0-byte physical blocks
[   11.964455] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.194318] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.420987] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.651112] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.881002] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.018711] sd 6:0:0:3: [sde] Media removed, stopped polling
[   13.110991] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.324402] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.447384] sd 6:0:0:2: [sdd] Test WP failed, assume Write Enabled
[   13.534398] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.750935] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.964262] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.174332] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.384390] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.492631] audit: type=1100 audit(1637096608.329:33): pid=486 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[   14.501882] audit: type=1101 audit(1637096608.339:34): pid=486 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[   14.502245] audit: type=1103 audit(1637096608.339:35): pid=486 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[   14.502268] audit: type=1006 audit(1637096608.339:36): pid=486 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   14.502270] audit: type=1300 audit(1637096608.339:36): arch=c000003e syscall=1 success=yes exit=4 a0=5 a1=7ffe7eafca40 a2=4 a3=3e8 items=0 ppid=1 pid=486 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=1000 fsgid=0 tty=tty1 ses=1 comm="login" exe="/usr/bin/login" key=(null)
[   14.502271] audit: type=1327 audit(1637096608.339:36): proctitle=2F62696E2F6C6F67696E002D70002D2D
[   14.507475] sd 6:0:0:2: [sdd] Asking for cache data failed
[   14.507480] sd 6:0:0:2: [sdd] Assuming drive cache: write through
[   14.511273] audit: type=1130 audit(1637096608.349:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.513790] audit: type=1101 audit(1637096608.349:38): pid=715 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="cedric" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.513805] audit: type=1103 audit(1637096608.349:39): pid=715 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="cedric" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   14.513825] audit: type=1006 audit(1637096608.349:40): pid=715 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   14.593771] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.717732] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[   14.804221] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.014210] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.224226] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.434258] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.644196] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.854225] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.064325] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.274037] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.484342] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.694174] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.904203] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   17.114187] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   17.324267] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   17.537482] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   17.750331] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   17.963664] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.173672] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.591369] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   18.790307] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.160293] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.370283] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.583616] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.793606] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.006931] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.216925] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.426918] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.643578] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.853570] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.063561] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.273555] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.483586] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.693576] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.903586] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.113543] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.323527] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.533521] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.743514] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.953544] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.170206] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.293634] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   23.383564] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.507181] sd 6:0:0:3: [sde] Attached SCSI removable disk
[   23.600184] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.722993] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[   23.810165] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.020192] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.230165] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.440169] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.650150] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.860731] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.080747] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.294077] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.510702] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.730675] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.947276] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.163928] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.383905] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.603897] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.820548] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   27.033952] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   27.250418] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   27.470569] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   27.690665] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   27.900637] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   28.117338] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   28.363281] kauditd_printk_skb: 13 callbacks suppressed
[   28.363284] audit: type=1100 audit(1637096622.200:50): pid=1011 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   28.363302] audit: type=1101 audit(1637096622.200:51): pid=1011 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   28.363541] audit: type=1103 audit(1637096622.200:52): pid=1011 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   28.363572] audit: type=1105 audit(1637096622.200:53): pid=1011 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   30.440422] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[root@cedric cedric]# 

Dmesg after suspending:

[   63.518991] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   63.830831] sr 1:0:0:0: [sr0] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[   63.830835] sr 1:0:0:0: [sr0] tag#15 Sense Key : Not Ready [current] 
[   63.830837] sr 1:0:0:0: [sr0] tag#15 Add. Sense: Medium not present - tray closed
[   63.830839] sr 1:0:0:0: [sr0] tag#15 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[   63.830840] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[   63.830871] sr 1:0:0:0: [sr0] tag#27 unaligned transfer
[   63.830873] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   63.830875] Buffer I/O error on dev sr0, logical block 0, async page read
[   63.830882] sr 1:0:0:0: [sr0] tag#28 unaligned transfer
[   63.830883] blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   63.830885] Buffer I/O error on dev sr0, logical block 1, async page read
[   63.830890] sr 1:0:0:0: [sr0] tag#29 unaligned transfer
[   63.830891] blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   63.830892] Buffer I/O error on dev sr0, logical block 2, async page read
[   63.830896] sr 1:0:0:0: [sr0] tag#30 unaligned transfer
[   63.830896] blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   63.830898] Buffer I/O error on dev sr0, logical block 3, async page read
[   63.830901] sr 1:0:0:0: [sr0] tag#0 unaligned transfer
[   63.830902] blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   63.830903] Buffer I/O error on dev sr0, logical block 4, async page read
[   63.830907] sr 1:0:0:0: [sr0] tag#1 unaligned transfer
[   63.830908] blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   63.830909] Buffer I/O error on dev sr0, logical block 5, async page read
[   63.830913] sr 1:0:0:0: [sr0] tag#2 unaligned transfer
[   63.830913] blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   63.830914] Buffer I/O error on dev sr0, logical block 6, async page read
[   63.830918] sr 1:0:0:0: [sr0] tag#3 unaligned transfer
[   63.830919] blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   63.830920] Buffer I/O error on dev sr0, logical block 7, async page read
[   63.928981] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   95.164864] audit: type=1334 audit(1637096689.005:54): prog-id=21 op=LOAD
[   95.164910] audit: type=1334 audit(1637096689.005:55): prog-id=22 op=LOAD
[   95.194685] audit: type=1130 audit(1637096689.035:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   95.284739] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   96.389351] PM: suspend entry (deep)
[   96.408602] Filesystems sync: 0.019 seconds
[   96.409031] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   96.410344] OOM killer disabled.
[   96.410345] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   96.411434] printk: Suspending console(s) (use no_console_suspend to debug)
[   96.424765] r8169 0000:04:00.0 eno1: Link is Down
[   96.425366] sd 7:0:0:0: [sda] Synchronizing SCSI cache
[   96.835838] ACPI: PM: Preparing to enter system sleep state S3
[   97.172678] ACPI: PM: Saving platform NVS memory
[   97.172743] Disabling non-boot CPUs ...
[   97.174696] smpboot: CPU 1 is now offline
[   97.176802] smpboot: CPU 2 is now offline
[   97.178914] smpboot: CPU 3 is now offline
[   97.181059] smpboot: CPU 4 is now offline
[   97.183020] smpboot: CPU 5 is now offline
[   97.184977] smpboot: CPU 6 is now offline
[   97.185466] Spectre V2 : Update user space SMT mitigation: STIBP off
[   97.186850] smpboot: CPU 7 is now offline
[   97.188647] smpboot: CPU 8 is now offline
[   97.190448] smpboot: CPU 9 is now offline
[   97.192428] smpboot: CPU 10 is now offline
[   97.194194] smpboot: CPU 11 is now offline
[   97.194960] ACPI: PM: Low-level resume complete
[   97.195000] ACPI: PM: Restoring platform NVS memory
[   97.195214] LVT offset 0 assigned for vector 0x400
[   97.195639] Enabling non-boot CPUs ...
[   97.195684] x86: Booting SMP configuration:
[   97.195685] smpboot: Booting Node 0 Processor 1 APIC 0x2
[   97.195798] microcode: CPU1: patch_level=0x0a201009
[   97.198432] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[   97.199602] CPU1 is up
[   97.199620] smpboot: Booting Node 0 Processor 2 APIC 0x4
[   97.199753] microcode: CPU2: patch_level=0x0a201009
[   97.201974] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[   97.202892] CPU2 is up
[   97.202907] smpboot: Booting Node 0 Processor 3 APIC 0x6
[   97.203005] microcode: CPU3: patch_level=0x0a201009
[   97.205211] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[   97.206305] CPU3 is up
[   97.206320] smpboot: Booting Node 0 Processor 4 APIC 0x8
[   97.206439] microcode: CPU4: patch_level=0x0a201009
[   97.208640] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[   97.209646] CPU4 is up
[   97.209664] smpboot: Booting Node 0 Processor 5 APIC 0xa
[   97.209764] microcode: CPU5: patch_level=0x0a201009
[   97.211973] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[   97.213003] CPU5 is up
[   97.213018] smpboot: Booting Node 0 Processor 6 APIC 0x1
[   97.213145] microcode: CPU6: patch_level=0x0a201009
[   97.215376] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[   97.216420] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[   97.216436] CPU6 is up
[   97.216460] smpboot: Booting Node 0 Processor 7 APIC 0x3
[   97.216563] microcode: CPU7: patch_level=0x0a201009
[   97.218792] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[   97.219706] CPU7 is up
[   97.219722] smpboot: Booting Node 0 Processor 8 APIC 0x5
[   97.219843] microcode: CPU8: patch_level=0x0a201009
[   97.222059] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[   97.223068] CPU8 is up
[   97.223082] smpboot: Booting Node 0 Processor 9 APIC 0x7
[   97.223185] microcode: CPU9: patch_level=0x0a201009
[   97.225411] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[   97.226423] CPU9 is up
[   97.226440] smpboot: Booting Node 0 Processor 10 APIC 0x9
[   97.226567] microcode: CPU10: patch_level=0x0a201009
[   97.228794] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[   97.229804] CPU10 is up
[   97.229818] smpboot: Booting Node 0 Processor 11 APIC 0xb
[   97.229928] microcode: CPU11: patch_level=0x0a201009
[   97.232151] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[   97.233180] CPU11 is up
[   97.234039] ACPI: PM: Waking up from system sleep state S3
[   97.306891] usb usb1: root hub lost power or was reset
[   97.306893] usb usb2: root hub lost power or was reset
[   97.406295] nvme nvme0: Shutdown timeout set to 10 seconds
[   97.411605] nvme nvme0: 32/0/0 default/read/poll queues
[   97.429536] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000).
[   97.496203] r8169 0000:04:00.0 eno1: Link is Down
[   97.619156] ata1: SATA link down (SStatus 0 SControl 300)
[   97.619228] ata5: SATA link down (SStatus 0 SControl 330)
[   97.619250] ata4: SATA link down (SStatus 0 SControl 300)
[   97.619278] ata3: SATA link down (SStatus 0 SControl 300)
[   97.756263] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[   97.776128] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   97.793233] ata2.00: configured for UDMA/100
[   97.820175] [drm] UVD and UVD ENC initialized successfully.
[   97.921143] [drm] VCE initialized successfully.
[   98.160182] usb 1-9: reset high-speed USB device number 4 using xhci_hcd
[   98.339689] ata6: failed to resume link (SControl 0)
[   98.339705] ata6: SATA link down (SStatus 0 SControl 0)
[   98.563481] usb 1-10: reset high-speed USB device number 5 using xhci_hcd
[   98.966788] usb 1-7: reset full-speed USB device number 3 using xhci_hcd
[   99.526814] usb 1-9.3: reset low-speed USB device number 8 using xhci_hcd
[  100.200126] usb 1-9.2: reset low-speed USB device number 6 using xhci_hcd
[  100.523282] r8169 0000:04:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[  100.723451] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  101.530076] usb 1-10.1: reset high-speed USB device number 7 using xhci_hcd
[  101.883386] usb 1-10.4: reset high-speed USB device number 10 using xhci_hcd
[  102.013025] OOM killer enabled.
[  102.013027] Restarting tasks ... done.
[  102.014808] PM: suspend exit
[  102.016077] audit: type=1130 audit(1637096696.820:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  102.016081] audit: type=1131 audit(1637096696.820:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  102.102070] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd

seth

Member

Registered: 2012-09-03

Posts: 57,526

Re: updated BIOS: system immediately resumes from suspend (Gigabyte B550)

https://bbs.archlinux.org/viewtopic.php … 5#p2003545

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

cdwijs

Member

Registered: 2010-04-24

Posts: 289

Re: updated BIOS: system immediately resumes from suspend (Gigabyte B550)

I have downgraded my bios to mb_bios_b550-aorus-pro-ac_f12.zip Now the PC suspends correctly (i.e. it stays off until I hit the keyboard)

Dmesg after boot:

# dmesg 
[    0.000000] Linux version 5.15.2-arch1-1 (linux@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Fri, 12 Nov 2021 19:22:10 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8b90b3e6-d80e-445d-adf5-cc65a591b835 rw rootflags=subvol=root loglevel=3 quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 3376
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009e1ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009e20000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20e000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bc95afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc95b000-0x00000000bcc8cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bcc8d000-0x00000000bccd3fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bccd4000-0x00000000bd351fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd352000-0x00000000bdffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bdfff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000083f380000-0x000000083fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 AORUS PRO AC/B550 AORUS PRO AC, BIOS F12 01/18/2021
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3693.041 MHz processor
[    0.000312] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000314] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000318] last_pfn = 0x83f380 max_arch_pfn = 0x400000000
[    0.001210] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001455] total RAM covered: 3071M
[    0.001532] Found optimal setting for mtrr clean up
[    0.001533]  gran_size: 64K 	chunk_size: 64M 	num_reg: 3  	lose cover RAM: 0G
[    0.001624] e820: update [mem 0xbd740000-0xbd74ffff] usable ==> reserved
[    0.001630] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.001632] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.004288] Using GB pages for direct mapping
[    0.004516] RAMDISK: [mem 0x36fe9000-0x377ebfff]
[    0.004519] ACPI: Early table checksum verification disabled
[    0.004522] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.004524] ACPI: XSDT 0x00000000BD33A728 0000DC (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004528] ACPI: FACP 0x00000000BCCBB000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.004532] ACPI: DSDT 0x00000000BCCB5000 005B11 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.004533] ACPI: FACS 0x00000000BD335000 000040
[    0.004535] ACPI: SSDT 0x00000000BCCCA000 0090C9 (v01 GBT    GSWApp   00000001 INTL 20190509)
[    0.004536] ACPI: SSDT 0x00000000BCCC1000 008C98 (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.004538] ACPI: SSDT 0x00000000BCCBD000 003C65 (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.004539] ACPI: SSDT 0x00000000BCCBC000 0001AD (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.004541] ACPI: FIDT 0x00000000BCCB4000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004542] ACPI: MCFG 0x00000000BCCB3000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.004544] ACPI: HPET 0x00000000BCCB2000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.004545] ACPI: IVRS 0x00000000BCCB0000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000000)
[    0.004547] ACPI: PCCT 0x00000000BCCAF000 00006E (v02 AMD    AmdTable 00000001 AMD  00000000)
[    0.004548] ACPI: SSDT 0x00000000BCCAC000 002FDD (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.004550] ACPI: CRAT 0x00000000BCCAB000 000B18 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.004551] ACPI: CDIT 0x00000000BCCAA000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.004552] ACPI: SSDT 0x00000000BCCA9000 0005F6 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.004554] ACPI: SSDT 0x00000000BCCA7000 0014F6 (v01 AMD    ArticTPX 00000001 INTL 20190509)
[    0.004555] ACPI: SSDT 0x00000000BCCA6000 000788 (v01 AMD    ArticNOI 00000001 INTL 20190509)
[    0.004556] ACPI: SSDT 0x00000000BCCA2000 0036E3 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.004558] ACPI: APIC 0x00000000BCCA0000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.004559] ACPI: SSDT 0x00000000BCC9F000 00008D (v01 AMD    ArticDIS 00000001 INTL 20190509)
[    0.004561] ACPI: SSDT 0x00000000BCC9D000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.004562] ACPI: SSDT 0x00000000BCC9C000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.004564] ACPI: FPDT 0x00000000BCC9B000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004565] ACPI: WSMT 0x00000000BCCA1000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004566] ACPI: Reserving FACP table memory at [mem 0xbccbb000-0xbccbb113]
[    0.004567] ACPI: Reserving DSDT table memory at [mem 0xbccb5000-0xbccbab10]
[    0.004568] ACPI: Reserving FACS table memory at [mem 0xbd335000-0xbd33503f]
[    0.004568] ACPI: Reserving SSDT table memory at [mem 0xbccca000-0xbccd30c8]
[    0.004568] ACPI: Reserving SSDT table memory at [mem 0xbccc1000-0xbccc9c97]
[    0.004569] ACPI: Reserving SSDT table memory at [mem 0xbccbd000-0xbccc0c64]
[    0.004569] ACPI: Reserving SSDT table memory at [mem 0xbccbc000-0xbccbc1ac]
[    0.004570] ACPI: Reserving FIDT table memory at [mem 0xbccb4000-0xbccb409b]
[    0.004570] ACPI: Reserving MCFG table memory at [mem 0xbccb3000-0xbccb303b]
[    0.004571] ACPI: Reserving HPET table memory at [mem 0xbccb2000-0xbccb2037]
[    0.004571] ACPI: Reserving IVRS table memory at [mem 0xbccb0000-0xbccb00cf]
[    0.004571] ACPI: Reserving PCCT table memory at [mem 0xbccaf000-0xbccaf06d]
[    0.004572] ACPI: Reserving SSDT table memory at [mem 0xbccac000-0xbccaefdc]
[    0.004572] ACPI: Reserving CRAT table memory at [mem 0xbccab000-0xbccabb17]
[    0.004573] ACPI: Reserving CDIT table memory at [mem 0xbccaa000-0xbccaa028]
[    0.004573] ACPI: Reserving SSDT table memory at [mem 0xbcca9000-0xbcca95f5]
[    0.004573] ACPI: Reserving SSDT table memory at [mem 0xbcca7000-0xbcca84f5]
[    0.004574] ACPI: Reserving SSDT table memory at [mem 0xbcca6000-0xbcca6787]
[    0.004574] ACPI: Reserving SSDT table memory at [mem 0xbcca2000-0xbcca56e2]
[    0.004575] ACPI: Reserving APIC table memory at [mem 0xbcca0000-0xbcca015d]
[    0.004575] ACPI: Reserving SSDT table memory at [mem 0xbcc9f000-0xbcc9f08c]
[    0.004576] ACPI: Reserving SSDT table memory at [mem 0xbcc9d000-0xbcc9e47e]
[    0.004576] ACPI: Reserving SSDT table memory at [mem 0xbcc9c000-0xbcc9c0be]
[    0.004576] ACPI: Reserving FPDT table memory at [mem 0xbcc9b000-0xbcc9b043]
[    0.004577] ACPI: Reserving WSMT table memory at [mem 0xbcca1000-0xbcca1027]
[    0.004621] No NUMA configuration found
[    0.004621] Faking a node at [mem 0x0000000000000000-0x000000083f37ffff]
[    0.004623] NODE_DATA(0) allocated [mem 0x83f37c000-0x83f37ffff]
[    0.004649] Zone ranges:
[    0.004649]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.004650]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.004651]   Normal   [mem 0x0000000100000000-0x000000083f37ffff]
[    0.004652]   Device   empty
[    0.004652] Movable zone start for each node
[    0.004653] Early memory node ranges
[    0.004653]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.004654]   node   0: [mem 0x0000000000100000-0x0000000009e1ffff]
[    0.004654]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.004655]   node   0: [mem 0x000000000a20e000-0x000000000affffff]
[    0.004655]   node   0: [mem 0x000000000b020000-0x00000000bc95afff]
[    0.004656]   node   0: [mem 0x00000000bdfff000-0x00000000beffffff]
[    0.004656]   node   0: [mem 0x0000000100000000-0x000000083f37ffff]
[    0.004658] Initmem setup node 0 [mem 0x0000000000001000-0x000000083f37ffff]
[    0.004661] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.004671] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.004755] On node 0, zone DMA32: 480 pages in unavailable ranges
[    0.004764] On node 0, zone DMA32: 14 pages in unavailable ranges
[    0.006981] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.007031] On node 0, zone DMA32: 5796 pages in unavailable ranges
[    0.042216] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.042234] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.042772] ACPI: PM-Timer IO Port: 0x808
[    0.042778] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.042789] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.042795] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.042796] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.042798] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.042800] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.042801] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.042804] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[    0.042821] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.042823] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.042823] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.042824] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.042824] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.042825] PM: hibernation: Registered nosave memory: [mem 0x09e20000-0x09ffffff]
[    0.042826] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20dfff]
[    0.042827] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.042828] PM: hibernation: Registered nosave memory: [mem 0xbc95b000-0xbcc8cfff]
[    0.042828] PM: hibernation: Registered nosave memory: [mem 0xbcc8d000-0xbccd3fff]
[    0.042828] PM: hibernation: Registered nosave memory: [mem 0xbccd4000-0xbd351fff]
[    0.042829] PM: hibernation: Registered nosave memory: [mem 0xbd352000-0xbdffefff]
[    0.042830] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.042830] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.042830] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.042831] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
[    0.042831] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[    0.042831] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff]
[    0.042832] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd7fffff]
[    0.042832] PM: hibernation: Registered nosave memory: [mem 0xfd800000-0xfe9fffff]
[    0.042832] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.042833] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.042833] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.042833] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.042834] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.042834] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.042834] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.042835] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.042835] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.042835] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.042836] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.042836] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.042836] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.042837] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.042837] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.042837] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.042838] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.042838] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.042838] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.042839] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.042840] Booting paravirtualized kernel on bare hardware
[    0.042842] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.045355] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1
[    0.046260] percpu: Embedded 53 pages/cpu s180224 r8192 d28672 u262144
[    0.046266] pcpu-alloc: s180224 r8192 d28672 u262144 alloc=1*2097152
[    0.046268] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.046272] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
[    0.046295] Built 1 zonelists, mobility grouping on.  Total pages: 8243874
[    0.046297] Policy zone: Normal
[    0.046298] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8b90b3e6-d80e-445d-adf5-cc65a591b835 rw rootflags=subvol=root loglevel=3 quiet
[    0.046332] Unknown command line parameters: BOOT_IMAGE=/vmlinuz-linux
[    0.046333] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.046333] printk: log_buf_len total cpu_extra contributions: 126976 bytes
[    0.046334] printk: log_buf_len min size: 131072 bytes
[    0.046460] printk: log_buf_len: 262144 bytes
[    0.046461] printk: early log buf free: 116240(88%)
[    0.048433] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.049420] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.049598] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[    0.101765] Memory: 32799620K/33499560K available (14344K kernel code, 2070K rwdata, 10772K rodata, 1832K init, 3876K bss, 699680K reserved, 0K cma-reserved)
[    0.101769] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0
[    0.101848] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.101855] ftrace: allocating 44240 entries in 173 pages
[    0.112806] ftrace: allocated 173 pages with 5 groups
[    0.112905] rcu: Preemptible hierarchical RCU implementation.
[    0.112906] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.112906] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
[    0.112906] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.112907] 	Trampoline variant of Tasks RCU enabled.
[    0.112908] 	Rude variant of Tasks RCU enabled.
[    0.112908] 	Tracing variant of Tasks RCU enabled.
[    0.112909] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.112909] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.114710] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
[    0.114939] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.115041] spurious 8259A interrupt: IRQ7.
[    0.115051] Console: colour dummy device 80x25
[    0.115058] printk: console [tty0] enabled
[    0.115074] ACPI: Core revision 20210730
[    0.115179] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.115194] APIC: Switch to symmetric I/O mode setup
[    0.115974] Switched APIC routing to physical flat.
[    0.116596] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.131862] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6a774d8ecbd, max_idle_ns: 881590435682 ns
[    0.131865] Calibrating delay loop (skipped), value calculated using timer frequency.. 7389.83 BogoMIPS (lpj=12310136)
[    0.131866] pid_max: default: 32768 minimum: 301
[    0.131883] LSM: Security Framework initializing
[    0.131888] landlock: Up and running.
[    0.131889] Yama: becoming mindful.
[    0.131893] LSM support for eBPF active
[    0.131932] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.131970] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.132132] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.132169] LVT offset 1 assigned for vector 0xf9
[    0.132293] LVT offset 2 assigned for vector 0xf4
[    0.132325] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[    0.132326] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.132328] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.132329] Spectre V2 : Mitigation: Full AMD retpoline
[    0.132330] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.132330] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.132331] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.132331] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.132332] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.134343] Freeing SMP alternatives memory: 36K
[    0.244530] smpboot: CPU0: AMD Ryzen 5 5600X 6-Core Processor (family: 0x19, model: 0x21, stepping: 0x0)
[    0.244610] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.244613] ... version:                0
[    0.244613] ... bit width:              48
[    0.244613] ... generic registers:      6
[    0.244614] ... value mask:             0000ffffffffffff
[    0.244614] ... max period:             00007fffffffffff
[    0.244614] ... fixed-purpose events:   0
[    0.244615] ... event mask:             000000000000003f
[    0.244651] rcu: Hierarchical SRCU implementation.
[    0.244893] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.245031] smp: Bringing up secondary CPUs ...
[    0.245089] x86: Booting SMP configuration:
[    0.245089] .... node  #0, CPUs:        #1
[    0.003639] __common_interrupt: 1.55 No irq handler for vector
[    0.245268]   #2
[    0.003639] __common_interrupt: 2.55 No irq handler for vector
[    0.247384]   #3
[    0.003639] __common_interrupt: 3.55 No irq handler for vector
[    0.250618]   #4
[    0.003639] __common_interrupt: 4.55 No irq handler for vector
[    0.251920]   #5
[    0.003639] __common_interrupt: 5.55 No irq handler for vector
[    0.254021]   #6
[    0.003639] __common_interrupt: 6.55 No irq handler for vector
[    0.257277] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.257277]   #7
[    0.003639] __common_interrupt: 7.55 No irq handler for vector
[    0.258586]   #8
[    0.003639] __common_interrupt: 8.55 No irq handler for vector
[    0.260699]   #9
[    0.003639] __common_interrupt: 9.55 No irq handler for vector
[    0.263907]  #10
[    0.003639] __common_interrupt: 10.55 No irq handler for vector
[    0.265253]  #11
[    0.267352] smp: Brought up 1 node, 12 CPUs
[    0.267352] smpboot: Max logical packages: 3
[    0.267352] smpboot: Total of 12 processors activated (88668.02 BogoMIPS)
[    0.268857] devtmpfs: initialized
[    0.268857] x86/mm: Memory block size: 128MB
[    0.269308] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20dfff] (57344 bytes)
[    0.269308] ACPI: PM: Registering ACPI NVS region [mem 0xbccd4000-0xbd351fff] (6807552 bytes)
[    0.269308] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.269308] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.269308] pinctrl core: initialized pinctrl subsystem
[    0.269308] PM: RTC time: 21:23:33, date: 2021-11-16
[    0.269308] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.269308] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.269308] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.269354] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.269359] audit: initializing netlink subsys (disabled)
[    0.269364] audit: type=2000 audit(1637097813.153:1): state=initialized audit_enabled=0 res=1
[    0.269364] thermal_sys: Registered thermal governor 'fair_share'
[    0.269364] thermal_sys: Registered thermal governor 'bang_bang'
[    0.269364] thermal_sys: Registered thermal governor 'step_wise'
[    0.269364] thermal_sys: Registered thermal governor 'user_space'
[    0.269364] thermal_sys: Registered thermal governor 'power_allocator'
[    0.269364] cpuidle: using governor ladder
[    0.269364] cpuidle: using governor menu
[    0.269364] Detected 1 PCC Subspaces
[    0.269364] Registering PCC driver as Mailbox controller
[    0.269364] HugeTLB: can free 4094 vmemmap pages for hugepages-1048576kB
[    0.269364] ACPI: bus type PCI registered
[    0.269364] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.269364] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.269364] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.269364] PCI: Using configuration type 1 for base access
[    0.272104] Kprobes globally optimized
[    0.272107] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[    0.272107] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.272107] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.272107] fbcon: Taking over console
[    0.272107] ACPI: Added _OSI(Module Device)
[    0.272107] ACPI: Added _OSI(Processor Device)
[    0.272107] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.272107] ACPI: Added _OSI(Processor Aggregator Device)
[    0.272107] ACPI: Added _OSI(Linux-Dell-Video)
[    0.272107] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.272107] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.280615] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.281513] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.289104] ACPI: Interpreter enabled
[    0.289114] ACPI: PM: (supports S0 S3 S4 S5)
[    0.289114] ACPI: Using IOAPIC for interrupt routing
[    0.289308] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.289571] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.295419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.295423] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.295569] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.295576] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.295798] PCI host bridge to bus 0000:00
[    0.295799] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.295800] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.295801] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.295801] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.295802] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.295803] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.295803] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.295804] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.295804] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.295849] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[    0.295957] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
[    0.296048] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[    0.296151] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
[    0.296222] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.296340] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
[    0.296366] pci 0000:00:01.2: enabling Extended Tags
[    0.296413] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.296508] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[    0.296591] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[    0.296694] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[    0.296764] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.297131] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[    0.297216] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[    0.297300] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[    0.297399] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[    0.297424] pci 0000:00:07.1: enabling Extended Tags
[    0.297463] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.297551] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[    0.297651] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[    0.297676] pci 0000:00:08.1: enabling Extended Tags
[    0.297719] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.297841] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.297971] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.298089] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[    0.298145] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[    0.298200] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[    0.298255] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[    0.298309] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[    0.298364] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[    0.298419] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[    0.298474] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[    0.298567] pci 0000:01:00.0: [144d:a80a] type 00 class 0x010802
[    0.298584] pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
[    0.298780] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.298784] pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.298826] pci 0000:02:00.0: [1022:43ee] type 00 class 0x0c0330
[    0.298845] pci 0000:02:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit]
[    0.298888] pci 0000:02:00.0: enabling Extended Tags
[    0.298946] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.299017] pci 0000:02:00.1: [1022:43eb] type 00 class 0x010601
[    0.299068] pci 0000:02:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff]
[    0.299076] pci 0000:02:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref]
[    0.299083] pci 0000:02:00.1: enabling Extended Tags
[    0.299128] pci 0000:02:00.1: PME# supported from D3hot D3cold
[    0.299179] pci 0000:02:00.2: [1022:43e9] type 01 class 0x060400
[    0.299226] pci 0000:02:00.2: enabling Extended Tags
[    0.299277] pci 0000:02:00.2: PME# supported from D3hot D3cold
[    0.299341] pci 0000:00:01.2: PCI bridge to [bus 02-09]
[    0.299344] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.299346] pci 0000:00:01.2:   bridge window [mem 0xfcb00000-0xfcdfffff]
[    0.299393] pci 0000:03:00.0: [1022:43ea] type 01 class 0x060400
[    0.299443] pci 0000:03:00.0: enabling Extended Tags
[    0.299499] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.299566] pci 0000:03:04.0: [1022:43ea] type 01 class 0x060400
[    0.299617] pci 0000:03:04.0: enabling Extended Tags
[    0.299673] pci 0000:03:04.0: PME# supported from D3hot D3cold
[    0.299738] pci 0000:03:06.0: [1022:43ea] type 01 class 0x060400
[    0.299789] pci 0000:03:06.0: enabling Extended Tags
[    0.299844] pci 0000:03:06.0: PME# supported from D3hot D3cold
[    0.299910] pci 0000:03:07.0: [1022:43ea] type 01 class 0x060400
[    0.299961] pci 0000:03:07.0: enabling Extended Tags
[    0.300017] pci 0000:03:07.0: PME# supported from D3hot D3cold
[    0.300085] pci 0000:03:08.0: [1022:43ea] type 01 class 0x060400
[    0.300136] pci 0000:03:08.0: enabling Extended Tags
[    0.300191] pci 0000:03:08.0: PME# supported from D3hot D3cold
[    0.300259] pci 0000:03:09.0: [1022:43ea] type 01 class 0x060400
[    0.300310] pci 0000:03:09.0: enabling Extended Tags
[    0.300365] pci 0000:03:09.0: PME# supported from D3hot D3cold
[    0.300440] pci 0000:02:00.2: PCI bridge to [bus 03-09]
[    0.300445] pci 0000:02:00.2:   bridge window [io  0xf000-0xffff]
[    0.300448] pci 0000:02:00.2:   bridge window [mem 0xfcb00000-0xfccfffff]
[    0.300482] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.300523] pci 0000:03:04.0: PCI bridge to [bus 05]
[    0.300565] pci 0000:03:06.0: PCI bridge to [bus 06]
[    0.300606] pci 0000:03:07.0: PCI bridge to [bus 07]
[    0.300687] pci 0000:08:00.0: [10ec:8125] type 00 class 0x020000
[    0.300712] pci 0000:08:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.300746] pci 0000:08:00.0: reg 0x18: [mem 0xfcc00000-0xfcc0ffff 64bit]
[    0.300767] pci 0000:08:00.0: reg 0x20: [mem 0xfcc10000-0xfcc13fff 64bit]
[    0.300918] pci 0000:08:00.0: supports D1 D2
[    0.300919] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.301083] pci 0000:03:08.0: PCI bridge to [bus 08]
[    0.301088] pci 0000:03:08.0:   bridge window [io  0xf000-0xffff]
[    0.301091] pci 0000:03:08.0:   bridge window [mem 0xfcc00000-0xfccfffff]
[    0.301157] pci 0000:09:00.0: [8086:2526] type 00 class 0x028000
[    0.301192] pci 0000:09:00.0: reg 0x10: [mem 0xfcb00000-0xfcb03fff 64bit]
[    0.301376] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[    0.301504] pci 0000:03:09.0: PCI bridge to [bus 09]
[    0.301511] pci 0000:03:09.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.301608] pci 0000:0a:00.0: [1002:699f] type 00 class 0x030000
[    0.301625] pci 0000:0a:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.301636] pci 0000:0a:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.301643] pci 0000:0a:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.301651] pci 0000:0a:00.0: reg 0x24: [mem 0xfce00000-0xfce3ffff]
[    0.301658] pci 0000:0a:00.0: reg 0x30: [mem 0xfce40000-0xfce5ffff pref]
[    0.301744] pci 0000:0a:00.0: supports D1 D2
[    0.301744] pci 0000:0a:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.301865] pci 0000:0a:00.1: [1002:aae0] type 00 class 0x040300
[    0.301882] pci 0000:0a:00.1: reg 0x10: [mem 0xfce60000-0xfce63fff 64bit]
[    0.301975] pci 0000:0a:00.1: supports D1 D2
[    0.302056] pci 0000:00:03.1: PCI bridge to [bus 0a]
[    0.302059] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.302061] pci 0000:00:03.1:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.302064] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.302102] pci 0000:0b:00.0: [1022:148a] type 00 class 0x130000
[    0.302139] pci 0000:0b:00.0: enabling Extended Tags
[    0.302243] pci 0000:00:07.1: PCI bridge to [bus 0b]
[    0.302297] pci 0000:0c:00.0: [1022:1485] type 00 class 0x130000
[    0.302341] pci 0000:0c:00.0: enabling Extended Tags
[    0.302458] pci 0000:0c:00.1: [1022:1486] type 00 class 0x108000
[    0.302478] pci 0000:0c:00.1: reg 0x18: [mem 0xfc900000-0xfc9fffff]
[    0.302494] pci 0000:0c:00.1: reg 0x24: [mem 0xfca08000-0xfca09fff]
[    0.302504] pci 0000:0c:00.1: enabling Extended Tags
[    0.302609] pci 0000:0c:00.3: [1022:149c] type 00 class 0x0c0330
[    0.302623] pci 0000:0c:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit]
[    0.302653] pci 0000:0c:00.3: enabling Extended Tags
[    0.302698] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
[    0.302768] pci 0000:0c:00.4: [1022:1487] type 00 class 0x040300
[    0.302778] pci 0000:0c:00.4: reg 0x10: [mem 0xfca00000-0xfca07fff]
[    0.302813] pci 0000:0c:00.4: enabling Extended Tags
[    0.302856] pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold
[    0.302925] pci 0000:00:08.1: PCI bridge to [bus 0c]
[    0.302929] pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfcafffff]
[    0.303097] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.303133] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.303163] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.303201] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.303235] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.303262] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.303290] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.303318] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.303749] iommu: Default domain type: Translated 
[    0.303750] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.303757] pci 0000:0a:00.0: vgaarb: setting as boot VGA device
[    0.303757] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.303757] pci 0000:0a:00.0: vgaarb: bridge control possible
[    0.303757] vgaarb: loaded
[    0.303757] SCSI subsystem initialized
[    0.303757] libata version 3.00 loaded.
[    0.303757] ACPI: bus type USB registered
[    0.303757] usbcore: registered new interface driver usbfs
[    0.303757] usbcore: registered new interface driver hub
[    0.303757] usbcore: registered new device driver usb
[    0.303757] pps_core: LinuxPPS API ver. 1 registered
[    0.303757] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.303757] PTP clock support registered
[    0.303757] EDAC MC: Ver: 3.0.0
[    0.303757] NetLabel: Initializing
[    0.303757] NetLabel:  domain hash size = 128
[    0.303757] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.303757] NetLabel:  unlabeled traffic allowed by default
[    0.303757] PCI: Using ACPI for IRQ routing
[    0.307962] PCI: pci_cache_line_size set to 64 bytes
[    0.308031] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.308032] e820: reserve RAM buffer [mem 0x09e20000-0x0bffffff]
[    0.308032] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.308033] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.308033] e820: reserve RAM buffer [mem 0xbc95b000-0xbfffffff]
[    0.308034] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.308035] e820: reserve RAM buffer [mem 0x83f380000-0x83fffffff]
[    0.308548] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.308550] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.309569] clocksource: Switched to clocksource tsc-early
[    0.313018] VFS: Disk quotas dquot_6.6.0
[    0.313026] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.313061] pnp: PnP ACPI init
[    0.313112] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.313150] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
[    0.313269] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.313271] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.313271] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.313272] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.313412] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.313413] system 00:04: [io  0x040b] has been reserved
[    0.313413] system 00:04: [io  0x04d6] has been reserved
[    0.313414] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.313415] system 00:04: [io  0x0c14] has been reserved
[    0.313415] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.313416] system 00:04: [io  0x0c52] has been reserved
[    0.313416] system 00:04: [io  0x0c6c] has been reserved
[    0.313417] system 00:04: [io  0x0c6f] has been reserved
[    0.313417] system 00:04: [io  0x0cd0-0x0cd1] has been reserved
[    0.313418] system 00:04: [io  0x0cd2-0x0cd3] has been reserved
[    0.313419] system 00:04: [io  0x0cd4-0x0cd5] has been reserved
[    0.313419] system 00:04: [io  0x0cd6-0x0cd7] has been reserved
[    0.313420] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.313420] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.313421] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.313421] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.313422] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.313423] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.313424] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.313424] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.313425] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.313426] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.313427] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.313428] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.313429] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.313773] pnp: PnP ACPI: found 5 devices
[    0.319884] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.319917] NET: Registered PF_INET protocol family
[    0.320061] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.320973] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.321138] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.321347] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.321396] TCP: Hash tables configured (established 262144 bind 65536)
[    0.321495] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.321551] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.321612] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.321675] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.321678] NET: Registered PF_XDP protocol family
[    0.321685] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.321688] pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.321693] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.321704] pci 0000:03:04.0: PCI bridge to [bus 05]
[    0.321714] pci 0000:03:06.0: PCI bridge to [bus 06]
[    0.321725] pci 0000:03:07.0: PCI bridge to [bus 07]
[    0.321735] pci 0000:03:08.0: PCI bridge to [bus 08]
[    0.321737] pci 0000:03:08.0:   bridge window [io  0xf000-0xffff]
[    0.321741] pci 0000:03:08.0:   bridge window [mem 0xfcc00000-0xfccfffff]
[    0.321748] pci 0000:03:09.0: PCI bridge to [bus 09]
[    0.321752] pci 0000:03:09.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.321759] pci 0000:02:00.2: PCI bridge to [bus 03-09]
[    0.321761] pci 0000:02:00.2:   bridge window [io  0xf000-0xffff]
[    0.321764] pci 0000:02:00.2:   bridge window [mem 0xfcb00000-0xfccfffff]
[    0.321771] pci 0000:00:01.2: PCI bridge to [bus 02-09]
[    0.321772] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.321774] pci 0000:00:01.2:   bridge window [mem 0xfcb00000-0xfcdfffff]
[    0.321779] pci 0000:00:03.1: PCI bridge to [bus 0a]
[    0.321780] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.321782] pci 0000:00:03.1:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.321784] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.321787] pci 0000:00:07.1: PCI bridge to [bus 0b]
[    0.321793] pci 0000:00:08.1: PCI bridge to [bus 0c]
[    0.321795] pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfcafffff]
[    0.321799] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.321800] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.321801] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.321801] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.321802] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.321802] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.321803] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfec2ffff window]
[    0.321803] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.321804] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.321805] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.321805] pci_bus 0000:02: resource 1 [mem 0xfcb00000-0xfcdfffff]
[    0.321806] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.321806] pci_bus 0000:03: resource 1 [mem 0xfcb00000-0xfccfffff]
[    0.321807] pci_bus 0000:08: resource 0 [io  0xf000-0xffff]
[    0.321807] pci_bus 0000:08: resource 1 [mem 0xfcc00000-0xfccfffff]
[    0.321808] pci_bus 0000:09: resource 1 [mem 0xfcb00000-0xfcbfffff]
[    0.321808] pci_bus 0000:0a: resource 0 [io  0xe000-0xefff]
[    0.321809] pci_bus 0000:0a: resource 1 [mem 0xfce00000-0xfcefffff]
[    0.321809] pci_bus 0000:0a: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.321810] pci_bus 0000:0c: resource 1 [mem 0xfc800000-0xfcafffff]
[    0.321950] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.321959] pci 0000:0a:00.1: D0 power state depends on 0000:0a:00.0
[    0.322083] PCI: CLS 64 bytes, default 64
[    0.322091] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.322109] pci 0000:00:01.0: Adding to iommu group 0
[    0.322112] Trying to unpack rootfs image as initramfs...
[    0.322115] pci 0000:00:01.1: Adding to iommu group 1
[    0.322120] pci 0000:00:01.2: Adding to iommu group 2
[    0.322125] pci 0000:00:02.0: Adding to iommu group 3
[    0.322132] pci 0000:00:03.0: Adding to iommu group 4
[    0.322136] pci 0000:00:03.1: Adding to iommu group 5
[    0.322142] pci 0000:00:04.0: Adding to iommu group 6
[    0.322148] pci 0000:00:05.0: Adding to iommu group 7
[    0.322154] pci 0000:00:07.0: Adding to iommu group 8
[    0.322158] pci 0000:00:07.1: Adding to iommu group 9
[    0.322165] pci 0000:00:08.0: Adding to iommu group 10
[    0.322170] pci 0000:00:08.1: Adding to iommu group 11
[    0.322176] pci 0000:00:14.0: Adding to iommu group 12
[    0.322180] pci 0000:00:14.3: Adding to iommu group 12
[    0.322196] pci 0000:00:18.0: Adding to iommu group 13
[    0.322200] pci 0000:00:18.1: Adding to iommu group 13
[    0.322203] pci 0000:00:18.2: Adding to iommu group 13
[    0.322207] pci 0000:00:18.3: Adding to iommu group 13
[    0.322210] pci 0000:00:18.4: Adding to iommu group 13
[    0.322214] pci 0000:00:18.5: Adding to iommu group 13
[    0.322218] pci 0000:00:18.6: Adding to iommu group 13
[    0.322222] pci 0000:00:18.7: Adding to iommu group 13
[    0.322227] pci 0000:01:00.0: Adding to iommu group 14
[    0.322238] pci 0000:02:00.0: Adding to iommu group 15
[    0.322243] pci 0000:02:00.1: Adding to iommu group 15
[    0.322248] pci 0000:02:00.2: Adding to iommu group 15
[    0.322250] pci 0000:03:00.0: Adding to iommu group 15
[    0.322253] pci 0000:03:04.0: Adding to iommu group 15
[    0.322254] pci 0000:03:06.0: Adding to iommu group 15
[    0.322256] pci 0000:03:07.0: Adding to iommu group 15
[    0.322258] pci 0000:03:08.0: Adding to iommu group 15
[    0.322259] pci 0000:03:09.0: Adding to iommu group 15
[    0.322262] pci 0000:08:00.0: Adding to iommu group 15
[    0.322264] pci 0000:09:00.0: Adding to iommu group 15
[    0.322283] pci 0000:0a:00.0: Adding to iommu group 16
[    0.322289] pci 0000:0a:00.1: Adding to iommu group 16
[    0.322294] pci 0000:0b:00.0: Adding to iommu group 17
[    0.322300] pci 0000:0c:00.0: Adding to iommu group 18
[    0.322306] pci 0000:0c:00.1: Adding to iommu group 19
[    0.322312] pci 0000:0c:00.3: Adding to iommu group 20
[    0.322319] pci 0000:0c:00.4: Adding to iommu group 21
[    0.325228] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.325229] AMD-Vi: Extended features (0x58f77ef22294ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
[    0.325232] AMD-Vi: Interrupt remapping enabled
[    0.325233] AMD-Vi: Virtual APIC enabled
[    0.325233] AMD-Vi: X2APIC enabled
[    0.325288] software IO TLB: tearing down default memory pool
[    0.325695] LVT offset 0 assigned for vector 0x400
[    0.329427] perf: AMD IBS detected (0x000003ff)
[    0.329432] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.330224] Initialise system trusted keyrings
[    0.330233] Key type blacklist registered
[    0.330264] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.330734] zbud: loaded
[    0.333136] Key type asymmetric registered
[    0.333137] Asymmetric key parser 'x509' registered
[    0.333148] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.333174] io scheduler mq-deadline registered
[    0.333175] io scheduler kyber registered
[    0.333190] io scheduler bfq registered
[    0.333343] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[    0.333379] pcieport 0000:00:01.1: AER: enabled with IRQ 26
[    0.333475] pcieport 0000:00:01.2: PME: Signaling with IRQ 27
[    0.333523] pcieport 0000:00:01.2: AER: enabled with IRQ 27
[    0.333620] pcieport 0000:00:03.1: PME: Signaling with IRQ 28
[    0.333656] pcieport 0000:00:03.1: AER: enabled with IRQ 28
[    0.333795] pcieport 0000:00:07.1: PME: Signaling with IRQ 30
[    0.333826] pcieport 0000:00:07.1: AER: enabled with IRQ 30
[    0.333907] pcieport 0000:00:08.1: PME: Signaling with IRQ 31
[    0.333940] pcieport 0000:00:08.1: AER: enabled with IRQ 31
[    0.334787] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.334859] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.334871] ACPI: button: Power Button [PWRB]
[    0.334885] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.336976] ACPI: button: Power Button [PWRF]
[    0.340309] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1155
[    0.340323] Monitor-Mwait will be used to enter C-1 state
[    0.340328] ACPI: \_SB_.PLTF.C000: Found 2 idle states
[    0.340391] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[    0.340443] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[    0.340516] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[    0.340564] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[    0.340628] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[    0.343450] Freeing initrd memory: 8204K
[    0.343460] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[    0.343530] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[    0.343598] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[    0.343655] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[    0.343710] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[    0.343762] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[    0.343872] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.344406] Non-volatile memory driver v1.3
[    0.344407] Linux agpgart interface v0.103
[    0.344407] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.344818] nvme nvme0: pci function 0000:01:00.0
[    0.344847] ahci 0000:02:00.1: version 3.0
[    0.344951] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[    0.345008] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.345010] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.345253] scsi host0: ahci
[    0.345312] scsi host1: ahci
[    0.345353] scsi host2: ahci
[    0.345389] scsi host3: ahci
[    0.345428] scsi host4: ahci
[    0.345470] scsi host5: ahci
[    0.345485] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 45
[    0.345487] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 45
[    0.345489] ata3: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80200 irq 45
[    0.345490] ata4: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80280 irq 45
[    0.345492] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 45
[    0.345493] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 45
[    0.345518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.345527] ehci-pci: EHCI PCI platform driver
[    0.345535] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.345536] ohci-pci: OHCI PCI platform driver
[    0.345542] uhci_hcd: USB Universal Host Controller Interface driver
[    0.345561] usbcore: registered new interface driver usbserial_generic
[    0.345564] usbserial: USB Serial support registered for generic
[    0.345602] rtc_cmos 00:02: RTC can wake from S4
[    0.345758] rtc_cmos 00:02: registered as rtc0
[    0.345787] rtc_cmos 00:02: setting system clock to 2021-11-16T21:23:33 UTC (1637097813)
[    0.345794] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.345857] ledtrig-cpu: registered to indicate activity on CPUs
[    0.345930] vesafb: mode is 3840x2160x32, linelength=15360, pages=0
[    0.345931] vesafb: scrolling: redraw
[    0.345931] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.345935] vesafb: framebuffer at 0xd0000000, mapped to 0x00000000d1ab6819, using 32448k, total 32448k
[    0.345974] Console: switching to colour frame buffer device 240x67
[    0.357574] nvme nvme0: Shutdown timeout set to 10 seconds
[    0.365690] nvme nvme0: 32/0/0 default/read/poll queues
[    0.373839]  nvme0n1: p1 p2
[    0.555800] fb0: VESA VGA frame buffer device
[    0.555810] hid: raw HID events driver (C) Jiri Kosina
[    0.555844] drop_monitor: Initializing network drop monitor service
[    0.555878] Initializing XFRM netlink socket
[    0.555920] NET: Registered PF_INET6 protocol family
[    0.558261] Segment Routing with IPv6
[    0.558262] RPL Segment Routing with IPv6
[    0.558266] In-situ OAM (IOAM) with IPv6
[    0.558277] NET: Registered PF_PACKET protocol family
[    0.558745] microcode: CPU0: patch_level=0x0a201009
[    0.558751] microcode: CPU1: patch_level=0x0a201009
[    0.558757] microcode: CPU2: patch_level=0x0a201009
[    0.558762] microcode: CPU3: patch_level=0x0a201009
[    0.558765] microcode: CPU4: patch_level=0x0a201009
[    0.558771] microcode: CPU5: patch_level=0x0a201009
[    0.558776] microcode: CPU6: patch_level=0x0a201009
[    0.558778] microcode: CPU7: patch_level=0x0a201009
[    0.558783] microcode: CPU8: patch_level=0x0a201009
[    0.558787] microcode: CPU9: patch_level=0x0a201009
[    0.558792] microcode: CPU10: patch_level=0x0a201009
[    0.558796] microcode: CPU11: patch_level=0x0a201009
[    0.558798] microcode: Microcode Update Driver: v2.2.
[    0.558875] resctrl: L3 allocation detected
[    0.558876] resctrl: MB allocation detected
[    0.558876] resctrl: L3 monitoring detected
[    0.558878] IPI shorthand broadcast: enabled
[    0.558884] sched_clock: Marking stable (558561734, 305866)->(607431343, -48563743)
[    0.559079] registered taskstats version 1
[    0.559199] Loading compiled-in X.509 certificates
[    0.560805] Loaded X.509 cert 'Build time autogenerated kernel key: ac48247ae4b694dd45afa078318e6038d5aa91dc'
[    0.561532] zswap: loaded using pool lz4/z3fold
[    0.561854] Key type ._fscrypt registered
[    0.561855] Key type .fscrypt registered
[    0.561856] Key type fscrypt-provisioning registered
[    0.562049] PM:   Magic number: 13:285:399
[    0.562184] RAS: Correctable Errors collector initialized.
[    0.661402] ata1: SATA link down (SStatus 0 SControl 300)
[    1.140253] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.142481] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100
[    1.143299] ata2.00: configured for UDMA/100
[    1.144905] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB00 PQ: 0 ANSI: 5
[    1.338645] tsc: Refined TSC clocksource calibration: 3693.063 MHz
[    1.338649] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a7779d5e21, max_idle_ns: 881590797124 ns
[    1.338842] clocksource: Switched to clocksource tsc
[    1.507025] ata3: SATA link down (SStatus 0 SControl 300)
[    1.820356] ata4: SATA link down (SStatus 0 SControl 300)
[    2.133709] ata5: SATA link down (SStatus 0 SControl 330)
[    3.165308] ata6: failed to resume link (SControl 0)
[    3.165325] ata6: SATA link down (SStatus 0 SControl 0)
[    3.166121] Freeing unused decrypted memory: 2036K
[    3.166357] Freeing unused kernel image (initmem) memory: 1832K
[    3.166359] Write protecting the kernel read-only data: 28672k
[    3.166732] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    3.166948] Freeing unused kernel image (rodata/data gap) memory: 1516K
[    3.187920] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.187922] rodata_test: all tests were successful
[    3.187925] Run /init as init process
[    3.187926]   with arguments:
[    3.187926]     /init
[    3.187927]   with environment:
[    3.187927]     HOME=/
[    3.187927]     TERM=linux
[    3.187928]     BOOT_IMAGE=/vmlinuz-linux
[    3.239754] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.239764] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    3.243894] raid6: skip pq benchmark and using algorithm avx2x4
[    3.243896] raid6: using avx2x2 recovery algorithm
[    3.245675] xor: automatically using best checksumming function   avx       
[    3.274256] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.274258] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.289797] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[    3.290063] BTRFS: device fsid 8b90b3e6-d80e-445d-adf5-cc65a591b835 devid 1 transid 3016 /dev/nvme0n1p2 scanned by systemd-udevd (227)
[    3.336874] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    3.337173] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.337174] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.337175] usb usb1: Product: xHCI Host Controller
[    3.337176] usb usb1: Manufacturer: Linux 5.15.2-arch1-1 xhci-hcd
[    3.337176] usb usb1: SerialNumber: 0000:02:00.0
[    3.337230] hub 1-0:1.0: USB hub found
[    3.337243] hub 1-0:1.0: 10 ports detected
[    3.337391] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.337392] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    3.337394] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    3.337436] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.337446] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    3.337446] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.337447] usb usb2: Product: xHCI Host Controller
[    3.337448] usb usb2: Manufacturer: Linux 5.15.2-arch1-1 xhci-hcd
[    3.337448] usb usb2: SerialNumber: 0000:02:00.0
[    3.337505] hub 2-0:1.0: USB hub found
[    3.337511] hub 2-0:1.0: 4 ports detected
[    3.337643] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[    3.337646] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3
[    3.337750] xhci_hcd 0000:0c:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[    3.337990] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.337991] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.337991] usb usb3: Product: xHCI Host Controller
[    3.337992] usb usb3: Manufacturer: Linux 5.15.2-arch1-1 xhci-hcd
[    3.337992] usb usb3: SerialNumber: 0000:0c:00.3
[    3.338034] hub 3-0:1.0: USB hub found
[    3.338039] hub 3-0:1.0: 4 ports detected
[    3.338192] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[    3.338194] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4
[    3.338195] xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    3.338202] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.338210] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    3.338211] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.338212] usb usb4: Product: xHCI Host Controller
[    3.338212] usb usb4: Manufacturer: Linux 5.15.2-arch1-1 xhci-hcd
[    3.338213] usb usb4: SerialNumber: 0000:0c:00.3
[    3.338248] hub 4-0:1.0: USB hub found
[    3.338252] hub 4-0:1.0: 4 ports detected
[    3.365446] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.651882] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[    3.718332] BTRFS info (device nvme0n1p2): flagging fs with big metadata feature
[    3.718334] BTRFS info (device nvme0n1p2): disk space caching is enabled
[    3.718335] BTRFS info (device nvme0n1p2): has skinny extents
[    3.731412] random: fast init done
[    3.740351] BTRFS info (device nvme0n1p2): enabling ssd optimizations
[    3.812995] systemd[1]: systemd 249.6-3-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    3.828569] systemd[1]: Detected architecture x86-64.
[    3.828852] systemd[1]: Hostname set to <cedric>.
[    3.853797] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    3.881804] systemd[1]: Queued start job for default target Graphical Interface.
[    3.882349] systemd[1]: Created slice Slice /system/getty.
[    3.882469] systemd[1]: Created slice Slice /system/modprobe.
[    3.882617] systemd[1]: Created slice Slice /system/syslog-ng.
[    3.882719] systemd[1]: Created slice Slice /system/systemd-fsck.
[    3.882798] systemd[1]: Created slice User and Session Slice.
[    3.882827] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.882848] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.882909] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.882924] systemd[1]: Reached target Local Encrypted Volumes.
[    3.882940] systemd[1]: Reached target Remote File Systems.
[    3.882946] systemd[1]: Reached target Slice Units.
[    3.882953] systemd[1]: Reached target Swaps.
[    3.882964] systemd[1]: Reached target Local Verity Protected Volumes.
[    3.882992] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.883159] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.883590] systemd[1]: Listening on Process Core Dump Socket.
[    3.883647] systemd[1]: Listening on Journal Audit Socket.
[    3.883684] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.883726] systemd[1]: Listening on Journal Socket.
[    3.884017] systemd[1]: Listening on udev Control Socket.
[    3.884053] systemd[1]: Listening on udev Kernel Socket.
[    3.884342] systemd[1]: Mounting Huge Pages File System...
[    3.884509] usb 1-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    3.884512] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.884513] usb 1-6: Product: USB2.0 Hub
[    3.884662] systemd[1]: Mounting POSIX Message Queue File System...
[    3.884943] systemd[1]: Mounting Kernel Debug File System...
[    3.885257] systemd[1]: Mounting Kernel Trace File System...
[    3.885544] systemd[1]: Mounting Temporary Directory /tmp...
[    3.885889] systemd[1]: Starting Create List of Static Device Nodes...
[    3.886171] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.886467] systemd[1]: Starting Load Kernel Module configfs...
[    3.886750] systemd[1]: Starting Load Kernel Module drm...
[    3.887075] systemd[1]: Starting Load Kernel Module fuse...
[    3.887362] random: lvm: uninitialized urandom read (4 bytes read)
[    3.887376] systemd[1]: Starting Set Up Additional Binary Formats...
[    3.888068] systemd[1]: Starting Journal Service...
[    3.888553] systemd[1]: Starting Load Kernel Modules...
[    3.888900] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.888926] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    3.889287] systemd[1]: Starting Coldplug All udev Devices...
[    3.890019] systemd[1]: Mounted Huge Pages File System.
[    3.890062] systemd[1]: Mounted POSIX Message Queue File System.
[    3.890100] systemd[1]: Mounted Kernel Debug File System.
[    3.890132] systemd[1]: Mounted Kernel Trace File System.
[    3.890161] systemd[1]: Mounted Temporary Directory /tmp.
[    3.890265] systemd[1]: Finished Create List of Static Device Nodes.
[    3.890403] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    3.890503] systemd[1]: Finished Load Kernel Module configfs.
[    3.890623] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    3.890722] systemd[1]: Finished Load Kernel Module drm.
[    3.890775] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 337 (systemd-binfmt)
[    3.890901] BTRFS info (device nvme0n1p2): use zlib compression, level 3
[    3.890906] BTRFS info (device nvme0n1p2): disk space caching is enabled
[    3.891133] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    3.891480] systemd[1]: Mounting Kernel Configuration File System...
[    3.891528] hub 1-6:1.0: USB hub found
[    3.892049] systemd[1]: Finished Remount Root and Kernel File Systems.
[    3.892105] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    3.892281] systemd[1]: Mounted Kernel Configuration File System.
[    3.892323] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    3.892634] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    3.892924] systemd[1]: Starting Load/Save Random Seed...
[    3.892946] systemd[1]: Condition check resulted in Create System Users being skipped.
[    3.893254] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.893456] systemd[1]: Finished Set Up Additional Binary Formats.
[    3.893723] fuse: init (API version 7.34)
[    3.894031] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    3.894118] systemd[1]: Finished Load Kernel Module fuse.
[    3.894450] systemd[1]: Mounting FUSE Control File System...
[    3.895498] hub 1-6:1.0: 4 ports detected
[    3.900406] vboxdrv: loading out-of-tree module taints kernel.
[    3.900500] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    3.902291] systemd[1]: Mounted FUSE Control File System.
[    3.902404] vboxdrv: Found 12 processor cores
[    3.908214] systemd[1]: Finished Create Static Device Nodes in /dev.
[    3.908237] audit: type=1130 audit(1637097817.056:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.908652] audit: type=1334 audit(1637097817.059:3): prog-id=14 op=LOAD
[    3.908726] audit: type=1334 audit(1637097817.059:4): prog-id=15 op=LOAD
[    3.908772] audit: type=1334 audit(1637097817.059:5): prog-id=16 op=LOAD
[    3.908941] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    3.915059] systemd[1]: Started Journal Service.
[    3.915092] audit: type=1130 audit(1637097817.063:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.918259] systemd-journald[338]: Received client request to flush runtime journal.
[    3.928656] vboxdrv: TSC mode is Invariant, tentative frequency 3693058542 Hz
[    3.928658] vboxdrv: Successfully loaded version 6.1.28 r147628 (interface 0x00320000)
[    3.930418] VBoxNetAdp: Successfully started.
[    3.931206] audit: type=1130 audit(1637097817.079:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.932548] audit: type=1130 audit(1637097817.083:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.933242] VBoxNetFlt: Successfully started.
[    3.933726] audit: type=1130 audit(1637097817.083:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.937242] audit: type=1130 audit(1637097817.086:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.978380] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    4.076942] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    4.077275] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20210730/utaddress-204)
[    4.077280] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.077530] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    4.077531] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.078562] ccp 0000:0c:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[    4.082777] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    4.082835] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    4.082841] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    4.082991] cryptd: max_cpu_qlen set to 1000
[    4.093519] AVX2 version of gcm_enc/dec engaged.
[    4.093546] AES CTR mode by8 optimization enabled
[    4.105209] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    4.298933] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.327337] random: dhcpcd: uninitialized urandom read (112 bytes read)
[    4.362664] [drm] amdgpu kernel modesetting enabled.
[    4.369050] kvm: disabled by bios
[    4.371709] amdgpu: Ignoring ACPI CRAT on non-APU system
[    4.371712] amdgpu: Virtual CRAT table created for CPU
[    4.371720] amdgpu: Topology: Add CPU node
[    4.371783] checking generic (d0000000 1fb0000) vs hw (d0000000 10000000)
[    4.371785] fb0: switching to amdgpu from VESA VGA
[    4.371874] Console: switching to colour dummy device 80x25
[    4.371899] amdgpu 0000:0a:00.0: vgaarb: deactivate vga console
[    4.371984] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1462:0x8A90 0xC7).
[    4.371988] amdgpu 0000:0a:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[    4.371993] [drm] register mmio base: 0xFCE00000
[    4.371994] [drm] register mmio size: 262144
[    4.372002] [drm] add ip block number 0 <vi_common>
[    4.372003] [drm] add ip block number 1 <gmc_v8_0>
[    4.372004] [drm] add ip block number 2 <tonga_ih>
[    4.372005] [drm] add ip block number 3 <gfx_v8_0>
[    4.372006] [drm] add ip block number 4 <sdma_v3_0>
[    4.372007] [drm] add ip block number 5 <powerplay>
[    4.372008] [drm] add ip block number 6 <dm>
[    4.372009] [drm] add ip block number 7 <uvd_v6_0>
[    4.372009] [drm] add ip block number 8 <vce_v3_0>
[    4.372252] amdgpu 0000:0a:00.0: No more image in the PCI ROM
[    4.372272] amdgpu 0000:0a:00.0: amdgpu: Fetched VBIOS from ROM BAR
[    4.372274] amdgpu: ATOM BIOS: 113-d09001-e02
[    4.372289] [drm] UVD is enabled in VM mode
[    4.372289] [drm] UVD ENC is enabled in VM mode
[    4.372291] [drm] VCE enabled in VM mode
[    4.372315] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    4.373320] amdgpu 0000:0a:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[    4.373323] amdgpu 0000:0a:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[    4.373330] [drm] Detected VRAM RAM=2048M, BAR=256M
[    4.373331] [drm] RAM width 128bits GDDR5
[    4.373364] [drm] amdgpu: 2048M of VRAM memory ready
[    4.373365] [drm] amdgpu: 3072M of GTT memory ready.
[    4.373368] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    4.374105] snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client
[    4.374107] snd_hda_intel 0000:0a:00.1: Force to non-snoop mode
[    4.375879] [drm] PCIE GART of 256M enabled (table at 0x000000F401FA4000).
[    4.376684] [drm] Chained IB support enabled!
[    4.379600] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[    4.380085] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    4.380981] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    4.471283] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[    4.471310] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[    4.471325] [drm] Display Core initialized with v3.2.149!
[    4.472708] MCE: In-kernel MCE decoding enabled.
[    4.475328] kvm: disabled by bios
[    4.475476] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input3
[    4.475509] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input4
[    4.475532] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input5
[    4.475556] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input6
[    4.475578] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input7
[    4.481712] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    4.481715] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.481716] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.481717] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.481718] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    4.481718] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.481719] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.481720] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.481720] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    4.481951] snd_hda_intel 0000:0a:00.1: bound 0000:0a:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    4.493246] usb 1-7: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    4.493249] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.493250] usb 1-7: Product: ITE Device
[    4.493251] usb 1-7: Manufacturer: ITE Tech. Inc.
[    4.493835] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input8
[    4.493855] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input9
[    4.493870] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input10
[    4.493888] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input11
[    4.493903] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input12
[    4.493918] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input13
[    4.493933] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input14
[    4.634242] [drm] UVD and UVD ENC initialized successfully.
[    4.691858] usb 1-9: new high-speed USB device number 4 using xhci_hcd
[    4.713220] kvm: disabled by bios
[    4.735166] [drm] VCE initialized successfully.
[    4.736416] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    4.736514] amdgpu: SRAT table not found
[    4.736515] amdgpu: Virtual CRAT table created for GPU
[    4.736541] amdgpu: Topology: Add dGPU node [0x699f:0x1002]
[    4.736542] kfd kfd: amdgpu: added device 1002:699f
[    4.736562] amdgpu 0000:0a:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 5, active_cu_number 8
[    4.742370] [drm] fb mappable at 0xD24D4000
[    4.742371] [drm] vram apper at 0xD0000000
[    4.742372] [drm] size 33177600
[    4.742372] [drm] fb depth is 24
[    4.742373] [drm]    pitch is 15360
[    4.742397] fbcon: amdgpu (fb0) is primary device
[    4.888178] kvm: disabled by bios
[    4.898705] 8021q: 802.1Q VLAN Support v1.8
[    4.906453] usb 1-9: New USB device found, idVendor=050d, idProduct=0234, bcdDevice= 0.00
[    4.906456] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.913459] hub 1-9:1.0: USB hub found
[    4.916445] hub 1-9:1.0: 4 ports detected
[    5.005874] intel_rapl_common: Found RAPL domain package
[    5.005876] intel_rapl_common: Found RAPL domain core
[    5.007771] kvm: disabled by bios
[    5.022015] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.023292] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.023320] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.023322] cfg80211: failed to load regulatory.db
[    5.067146] Console: switching to colour frame buffer device 240x67
[    5.084236] amdgpu 0000:0a:00.0: [drm] fb0: amdgpu frame buffer device
[    5.112443] amdgpu 0000:0a:00.0: amdgpu: Using BACO for runtime pm
[    5.112630] [drm] Initialized amdgpu 3.42.0 20150101 for 0000:0a:00.0 on minor 0
[    5.128513] usb 1-10: new high-speed USB device number 5 using xhci_hcd
[    5.154538] kvm: disabled by bios
[    5.304630] kvm: disabled by bios
[    5.357440] usb 1-10: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    5.357442] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.357444] usb 1-10: Product: USB2.0 Hub
[    5.366454] hub 1-10:1.0: USB hub found
[    5.370429] hub 1-10:1.0: 4 ports detected
[    5.451839] usb 1-9.2: new low-speed USB device number 6 using xhci_hcd
[    5.461786] kvm: disabled by bios
[    5.464715] Intel(R) Wireless WiFi driver for Linux
[    5.467038] hid-generic 0003:048D:5702.0001: hiddev96,hidraw0: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:02:00.0-7/input0
[    5.467054] usbcore: registered new interface driver usbhid
[    5.467055] usbhid: USB HID core driver
[    5.480805] iwlwifi 0000:09:00.0: WRT: Overriding region id 0
[    5.480807] iwlwifi 0000:09:00.0: WRT: Overriding region id 1
[    5.480807] iwlwifi 0000:09:00.0: WRT: Overriding region id 2
[    5.480808] iwlwifi 0000:09:00.0: WRT: Overriding region id 3
[    5.480808] iwlwifi 0000:09:00.0: WRT: Overriding region id 4
[    5.480809] iwlwifi 0000:09:00.0: WRT: Overriding region id 6
[    5.480809] iwlwifi 0000:09:00.0: WRT: Overriding region id 8
[    5.480810] iwlwifi 0000:09:00.0: WRT: Overriding region id 9
[    5.480810] iwlwifi 0000:09:00.0: WRT: Overriding region id 10
[    5.480811] iwlwifi 0000:09:00.0: WRT: Overriding region id 11
[    5.480811] iwlwifi 0000:09:00.0: WRT: Overriding region id 15
[    5.480812] iwlwifi 0000:09:00.0: WRT: Overriding region id 16
[    5.480812] iwlwifi 0000:09:00.0: WRT: Overriding region id 18
[    5.480813] iwlwifi 0000:09:00.0: WRT: Overriding region id 19
[    5.480813] iwlwifi 0000:09:00.0: WRT: Overriding region id 20
[    5.480814] iwlwifi 0000:09:00.0: WRT: Overriding region id 21
[    5.480814] iwlwifi 0000:09:00.0: WRT: Overriding region id 28
[    5.480981] iwlwifi 0000:09:00.0: loaded firmware version 46.6b541b68.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
[    5.489563] libphy: r8169: probed
[    5.489705] r8169 0000:08:00.0 eth0: RTL8125B, 18:c0:4d:db:fe:78, XID 641, IRQ 110
[    5.489707] r8169 0000:08:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    5.552905] r8169 0000:08:00.0 eno1: renamed from eth0
[    5.611842] random: crng init done
[    5.611843] random: 3 urandom warning(s) missed due to ratelimiting
[    5.614272] kvm: disabled by bios
[    5.618715] kauditd_printk_skb: 16 callbacks suppressed
[    5.618717] audit: type=1130 audit(1637097818.769:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.625174] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-800:00: attached PHY driver (mii_bus:phy_addr=r8169-0-800:00, irq=MAC)
[    5.715402] usb 1-9.2: New USB device found, idVendor=046d, idProduct=c03e, bcdDevice=20.00
[    5.715407] usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.715409] usb 1-9.2: Product: USB-PS/2 Optical Mouse
[    5.715410] usb 1-9.2: Manufacturer: Logitech
[    5.724832] kvm: disabled by bios
[    5.748549] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C03E.0002/input/input15
[    5.748618] hid-generic 0003:046D:C03E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:02:00.0-9.2/input0
[    5.802993] audit: type=1130 audit(1637097818.953:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=syslog-ng@default comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.808672] r8169 0000:08:00.0 eno1: Link is Down
[    5.811831] usb 1-10.1: new high-speed USB device number 7 using xhci_hcd
[    5.861917] iwlwifi 0000:09:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x324
[    5.868889] thermal thermal_zone0: failed to read out thermal zone (-61)
[    5.909430] iwlwifi 0000:09:00.0: base HW address: bc:17:b8:b7:ae:da
[    5.976917] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.978793] iwlwifi 0000:09:00.0 wlp9s0: renamed from wlan0
[    5.988530] audit: type=1130 audit(1637097819.139:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.067377] usb 1-10.1: New USB device found, idVendor=0bda, idProduct=525d, bcdDevice=58.01
[    6.067379] usb 1-10.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    6.067381] usb 1-10.1: Product: HK 2M CAM
[    6.067382] usb 1-10.1: Manufacturer: WDH
[    6.067382] usb 1-10.1: SerialNumber: 202001010001
[    6.158502] usb 1-9.3: new low-speed USB device number 8 using xhci_hcd
[    6.221558] ACPI: \: failed to evaluate _DSM (0x1001)
[    6.221562] ACPI: \: failed to evaluate _DSM (0x1001)
[    6.221563] ACPI: \: failed to evaluate _DSM (0x1001)
[    6.221564] ACPI: \: failed to evaluate _DSM (0x1001)
[    6.407366] usb 1-9.3: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[    6.407370] usb 1-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.407371] usb 1-9.3: Product: USB Keyboard
[    6.407372] usb 1-9.3: Manufacturer: Logitech
[    6.476625] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:046D:C31C.0003/input/input16
[    6.531918] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:02:00.0-9.3/input0
[    6.545141] usb 1-10.2: new high-speed USB device number 9 using xhci_hcd
[    6.631613] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C31C.0004/input/input17
[    6.685356] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C31C.0004/input/input18
[    6.685412] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:02:00.0-9.3/input1
[    6.718361] mousedev: PS/2 mouse device common for all mice
[    6.733852] audit: type=1130 audit(1637097819.883:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=gpm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.227331] usb 1-10.2: New USB device found, idVendor=0bda, idProduct=0151, bcdDevice=51.95
[    7.227334] usb 1-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.227336] usb 1-10.2: Product: USB2.0-CRW
[    7.227337] usb 1-10.2: Manufacturer: Generic
[    7.227337] usb 1-10.2: SerialNumber: 20060413092100000
[    7.335128] usb 1-10.4: new high-speed USB device number 10 using xhci_hcd
[    7.474433] usb 1-10.4: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[    7.474438] usb 1-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.474440] usb 1-10.4: Product: Nexcopy Device  
[    7.474441] usb 1-10.4: Manufacturer: Generic 
[    7.474442] usb 1-10.4: SerialNumber: 032019-27618
[    7.514456] usb-storage 1-10.2:1.0: USB Mass Storage device detected
[    7.514480] mc: Linux media interface: v0.10
[    7.514536] scsi host6: usb-storage 1-10.2:1.0
[    7.514605] usb-storage 1-10.4:1.0: USB Mass Storage device detected
[    7.514658] usb-storage 1-10.4:1.0: Quirks match for vid 090c pid 1000: 400
[    7.514677] scsi host7: usb-storage 1-10.4:1.0
[    7.514722] usbcore: registered new interface driver usb-storage
[    7.518788] usbcore: registered new interface driver uas
[    7.521199] videodev: Linux video capture interface: v2.00
[    7.544301] usb 1-10.1: current rate 48000 is different from the runtime rate 8000
[    7.760305] usb 1-10.1: current rate 48000 is different from the runtime rate 16000
[    7.976406] usb 1-10.1: current rate 48000 is different from the runtime rate 44100
[    8.408370] usb 1-10.1: current rate 48000 is different from the runtime rate 8000
[    8.552451] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    8.558637] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    8.564803] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    8.570994] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    8.625264] usb 1-10.1: current rate 48000 is different from the runtime rate 16000
[    8.747181] r8169 0000:08:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[    8.747191] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[    8.841247] usb 1-10.1: current rate 48000 is different from the runtime rate 44100
[    9.241117] scsi 7:0:0:0: Direct-Access     Generic  Mass Storage     1100 PQ: 0 ANSI: 6
[    9.241981] sd 7:0:0:0: [sda] 62914560 512-byte logical blocks: (32.2 GB/30.0 GiB)
[    9.242583] sd 7:0:0:0: [sda] Write Protect is off
[    9.242584] sd 7:0:0:0: [sda] Mode Sense: 43 00 00 00
[    9.243955] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.270921]  sda: sda1
[    9.273165] sd 7:0:0:0: [sda] Attached SCSI removable disk
[    9.312531] usbcore: registered new interface driver snd-usb-audio
[    9.315239] usb 1-10.1: Found UVC 1.00 device HK 2M CAM (0bda:525d)
[    9.374586] input: HK 2M CAM: HK 2M CAM as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-10/1-10.1/1-10.1:1.0/input/input19
[    9.374628] usbcore: registered new interface driver uvcvideo
[    9.454717] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[    9.592434] sd 6:0:0:0: [sdb] Media removed, stopped polling
[    9.593033] sd 6:0:0:1: [sdc] Media removed, stopped polling
[    9.684771] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[    9.819095] sd 6:0:0:2: [sdd] Media removed, stopped polling
[    9.908089] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.118092] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.252389] sd 6:0:0:3: [sde] Media removed, stopped polling
[   10.344350] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.558063] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.768056] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.978022] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.994068] audit: type=1131 audit(1637097824.143:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.187708] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.398016] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.608004] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.817998] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.027996] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.238018] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.447589] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.658001] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.867658] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.077976] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.287575] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.497996] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.707562] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.917947] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.127970] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.337931] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.547961] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.757501] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.967904] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.177908] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.387782] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.597898] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.807500] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.020785] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.231111] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.447452] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.660797] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.779524] audit: type=1100 audit(1637097829.930:32): pid=459 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[   16.788536] audit: type=1101 audit(1637097829.940:33): pid=459 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[   16.788979] audit: type=1103 audit(1637097829.940:34): pid=459 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[   16.789025] audit: type=1006 audit(1637097829.940:35): pid=459 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   16.789032] audit: type=1300 audit(1637097829.940:35): arch=c000003e syscall=1 success=yes exit=4 a0=5 a1=7ffc2b3ba560 a2=4 a3=3e8 items=0 ppid=1 pid=459 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=1000 fsgid=0 tty=tty1 ses=1 comm="login" exe="/usr/bin/login" key=(null)
[   16.789037] audit: type=1327 audit(1637097829.940:35): proctitle=2F62696E2F6C6F67696E002D70002D2D
[   16.798435] audit: type=1130 audit(1637097829.950:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.800743] audit: type=1101 audit(1637097829.950:37): pid=708 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="cedric" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.800757] audit: type=1103 audit(1637097829.950:38): pid=708 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="cedric" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   16.800777] audit: type=1006 audit(1637097829.950:39): pid=708 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   16.874104] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.997521] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[   17.084197] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   17.294502] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   17.504451] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   17.714498] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   17.924490] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.134292] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.344420] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.554509] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.764467] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.974461] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.096716] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   19.184361] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.394017] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.607353] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.733676] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[   19.824437] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.034420] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.244453] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.454451] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.576631] sd 6:0:0:3: [sde] Attached SCSI removable disk
[   20.664399] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.874433] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.091077] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.301051] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.511043] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.720943] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.933960] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.147284] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.156816] kauditd_printk_skb: 10 callbacks suppressed
[   22.156818] audit: type=1130 audit(1637097835.306:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.167997] audit: type=1130 audit(1637097835.316:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.381488] audit: type=1130 audit(1637097835.533:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.607503] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   22.797276] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.160580] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.370604] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.580574] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.790591] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.000585] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.220581] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.430575] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.640574] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.850577] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.060555] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.270566] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.480560] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.690535] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.900528] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.110521] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.320524] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.530511] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.740507] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.950499] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   27.160466] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   27.373802] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   27.583799] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   27.800436] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   28.017108] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   28.230434] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   28.447098] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   28.670433] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   28.890421] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   29.100424] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   29.310399] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   29.530405] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   29.740386] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   29.953711] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   30.167051] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   30.377042] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   30.590370] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   30.800370] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   31.010357] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   31.223685] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   31.433682] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   31.647006] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   31.856993] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   32.070330] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   32.280762] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   32.490757] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   32.700303] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   32.910720] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   33.124068] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   33.340287] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   33.550290] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   33.766998] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   33.980390] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   34.190302] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   34.400302] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   34.620252] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   34.830313] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   35.056908] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   35.276914] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   35.496887] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   35.720219] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   35.947345] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   36.170534] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   36.386935] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   36.610252] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   38.436832] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   38.866793] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   39.100109] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   42.276737] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   45.697031] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   48.359770] audit: type=1100 audit(1637097861.511:49): pid=1414 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   48.359784] audit: type=1101 audit(1637097861.511:50): pid=1414 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   48.359936] audit: type=1103 audit(1637097861.511:51): pid=1414 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   48.359977] audit: type=1105 audit(1637097861.511:52): pid=1414 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   51.023140] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[root@cedric cedric]# 

Dmesg after suspending:

[  320.459191] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  326.856078] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  327.797246] PM: suspend entry (deep)
[  327.814009] Filesystems sync: 0.016 seconds
[  327.814327] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  327.815611] OOM killer disabled.
[  327.815611] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[  327.816385] printk: Suspending console(s) (use no_console_suspend to debug)
[  327.830639] r8169 0000:08:00.0 eno1: Link is Down
[  327.849720] sd 7:0:0:0: [sda] Synchronizing SCSI cache
[  328.233997] ACPI: PM: Preparing to enter system sleep state S3
[  328.556817] ACPI: PM: Saving platform NVS memory
[  328.556890] Disabling non-boot CPUs ...
[  328.558799] smpboot: CPU 1 is now offline
[  328.560793] smpboot: CPU 2 is now offline
[  328.562734] smpboot: CPU 3 is now offline
[  328.564610] smpboot: CPU 4 is now offline
[  328.566474] smpboot: CPU 5 is now offline
[  328.568280] smpboot: CPU 6 is now offline
[  328.568596] Spectre V2 : Update user space SMT mitigation: STIBP off
[  328.569967] smpboot: CPU 7 is now offline
[  328.571657] smpboot: CPU 8 is now offline
[  328.573288] smpboot: CPU 9 is now offline
[  328.574922] smpboot: CPU 10 is now offline
[  328.576488] smpboot: CPU 11 is now offline
[  328.577154] ACPI: PM: Low-level resume complete
[  328.577188] ACPI: PM: Restoring platform NVS memory
[  328.577357] LVT offset 0 assigned for vector 0x400
[  328.577765] Enabling non-boot CPUs ...
[  328.577812] x86: Booting SMP configuration:
[  328.577812] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  328.577925] microcode: CPU1: patch_level=0x0a201009
[  328.580182] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[  328.580901] CPU1 is up
[  328.580917] smpboot: Booting Node 0 Processor 2 APIC 0x4
[  328.581037] microcode: CPU2: patch_level=0x0a201009
[  328.583276] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[  328.583775] CPU2 is up
[  328.583792] smpboot: Booting Node 0 Processor 3 APIC 0x6
[  328.583889] microcode: CPU3: patch_level=0x0a201009
[  328.586124] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[  328.587109] CPU3 is up
[  328.587126] smpboot: Booting Node 0 Processor 4 APIC 0x8
[  328.587237] microcode: CPU4: patch_level=0x0a201009
[  328.589473] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[  328.590480] CPU4 is up
[  328.590495] smpboot: Booting Node 0 Processor 5 APIC 0xa
[  328.590592] microcode: CPU5: patch_level=0x0a201009
[  328.592829] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[  328.593809] CPU5 is up
[  328.593824] smpboot: Booting Node 0 Processor 6 APIC 0x1
[  328.593951] microcode: CPU6: patch_level=0x0a201009
[  328.596206] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[  328.597246] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[  328.597263] CPU6 is up
[  328.597290] smpboot: Booting Node 0 Processor 7 APIC 0x3
[  328.597394] microcode: CPU7: patch_level=0x0a201009
[  328.599644] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[  328.600560] CPU7 is up
[  328.600577] smpboot: Booting Node 0 Processor 8 APIC 0x5
[  328.600690] microcode: CPU8: patch_level=0x0a201009
[  328.602947] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[  328.603908] CPU8 is up
[  328.603921] smpboot: Booting Node 0 Processor 9 APIC 0x7
[  328.604023] microcode: CPU9: patch_level=0x0a201009
[  328.606274] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[  328.607261] CPU9 is up
[  328.607277] smpboot: Booting Node 0 Processor 10 APIC 0x9
[  328.607400] microcode: CPU10: patch_level=0x0a201009
[  328.609660] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[  328.610651] CPU10 is up
[  328.610665] smpboot: Booting Node 0 Processor 11 APIC 0xb
[  328.610779] microcode: CPU11: patch_level=0x0a201009
[  328.613037] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[  328.614013] CPU11 is up
[  328.614849] ACPI: PM: Waking up from system sleep state S3
[  328.687702] usb usb1: root hub lost power or was reset
[  328.687704] usb usb2: root hub lost power or was reset
[  328.787153] nvme nvme0: Shutdown timeout set to 10 seconds
[  328.792338] nvme nvme0: 32/0/0 default/read/poll queues
[  328.810454] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000).
[  328.853750] r8169 0000:08:00.0 eno1: Link is Down
[  328.879389] ACPI: \: failed to evaluate _DSM (0x1001)
[  328.879391] ACPI: \: failed to evaluate _DSM (0x1001)
[  328.879392] ACPI: \: failed to evaluate _DSM (0x1001)
[  328.879392] ACPI: \: failed to evaluate _DSM (0x1001)
[  328.999895] ata1: SATA link down (SStatus 0 SControl 300)
[  329.000017] ata3: SATA link down (SStatus 0 SControl 300)
[  329.000269] ata5: SATA link down (SStatus 0 SControl 330)
[  329.000437] ata4: SATA link down (SStatus 0 SControl 300)
[  329.133840] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[  329.157035] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  329.174073] ata2.00: configured for UDMA/100
[  329.194966] [drm] UVD and UVD ENC initialized successfully.
[  329.295930] [drm] VCE initialized successfully.
[  329.537357] usb 1-7: reset full-speed USB device number 3 using xhci_hcd
[  329.720439] ata6: failed to resume link (SControl 0)
[  329.720453] ata6: SATA link down (SStatus 0 SControl 0)
[  330.017333] usb 1-10: reset high-speed USB device number 5 using xhci_hcd
[  330.417308] usb 1-9: reset high-speed USB device number 4 using xhci_hcd
[  330.713964] usb 1-10.1: reset high-speed USB device number 7 using xhci_hcd
[  331.067302] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  331.795941] r8169 0000:08:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[  331.877260] usb 1-10.4: reset high-speed USB device number 10 using xhci_hcd
[  332.267266] usb 1-9.2: reset low-speed USB device number 6 using xhci_hcd
[  332.933929] usb 1-9.3: reset low-speed USB device number 8 using xhci_hcd
[  333.428489] OOM killer enabled.
[  333.428490] Restarting tasks ... done.
[  333.430142] PM: suspend exit
[  333.431237] audit: type=1130 audit(1637098177.850:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  333.431241] audit: type=1131 audit(1637098177.850:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  333.526188] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  333.742907] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  335.606531] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  336.036546] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  336.246204] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  336.456202] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[root@cedric cedric]# 

cdwijs

Member

Registered: 2010-04-24

Posts: 289

Re: updated BIOS: system immediately resumes from suspend (Gigabyte B550)

https://bbs.archlinux.org/viewtopic.php … 5#p2003545

Thank you, your link suggest that kernel 5.15 has a problem and kernel 5.14 has not. I found it's possible to restore all packages to a specific date [1]. I'm planning to downgrade my kernel and all packages to the last 5.14 kernel.

How can I find out when the last 5.14 kernel has been packaged?

[1] https://wiki.archlinux.org/title/Arch_L … cific_date

seth

Member

Registered: 2012-09-03

Posts: 57,526

Re: updated BIOS: system immediately resumes from suspend (Gigabyte B550)

You can just try and see whether the issue exists w/ the lts kernel.
Also the kernel is pretty much the only package that you can downgrade in isolation w/o any trouble (most of the time, going from 5.15 to 5.14 will not be a problem) - just don't forget to also downgrade out-of-tree kernel packages (eg. nvidia)

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

cdwijs

Member

Registered: 2010-04-24

Posts: 289

Re: updated BIOS: system immediately resumes from suspend (Gigabyte B550)

Just for the exercise I'm going to downgrade my entire system, even though the kernel can be downgraded in isolation.

It turns out the latest version of 5.14 is here:
https://archive.archlinux.org/repos/202 … os/x86_64/

The downgrade console messages:

[root@cedric cedric]# mv /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.ori
[root@cedric cedric]# nano /etc/pacman.d/mirrorlist
[root@cedric cedric]# cat /etc/pacman.d/mirrorlist
Server=https://archive.archlinux.org/repos/2021/11/12/$repo/os/$arch
[root@cedric cedric]# pacman -Syyuu
:: Synchronizing package databases...
 core                                                          137.5 KiB   881 KiB/s 00:00 [####################################################] 100%
 extra                                                        1567.3 KiB  3.89 MiB/s 00:00 [####################################################] 100%
 community                                                       5.8 MiB  3.30 MiB/s 00:02 [####################################################] 100%
 multilib                                                      150.3 KiB  1879 KiB/s 00:00 [####################################################] 100%
:: Starting full system upgrade...
warning: audit: downgrading from version 3.0.6-1 to version 3.0.5-1
warning: clang: downgrading from version 13.0.0-2 to version 12.0.1-1
warning: clazy: downgrading from version 1.10-2 to version 1.10-1
warning: compiler-rt: downgrading from version 13.0.0-1 to version 12.0.1-2
warning: gnome-screenshot: downgrading from version 41.0-1 to version 40.0-2
warning: ldc: downgrading from version 3:1.28.0-3 to version 3:1.28.0-1
warning: lib32-clang: downgrading from version 13.0.0-1 to version 12.0.1-1
warning: lib32-librsvg: downgrading from version 2:2.52.4-1 to version 2:2.52.3-1
warning: lib32-llvm-libs: downgrading from version 13.0.0-1 to version 12.0.1-3
warning: lib32-mesa: downgrading from version 21.2.5-1 to version 21.2.4-1
warning: lib32-opencl-mesa: downgrading from version 21.2.5-1 to version 21.2.4-1
warning: lib32-vulkan-mesa-layers: downgrading from version 21.2.5-1 to version 21.2.4-1
warning: lib32-vulkan-radeon: downgrading from version 21.2.5-1 to version 21.2.4-1
warning: libclc: downgrading from version 13.0.0-1 to version 12.0.1-1
warning: liblphobos: downgrading from version 3:1.28.0-3 to version 3:1.28.0-1
warning: librsvg: downgrading from version 2:2.52.4-1 to version 2:2.52.3-1
warning: linux: downgrading from version 5.15.2.arch1-1 to version 5.14.16.arch1-1
warning: llvm-libs: downgrading from version 13.0.0-3 to version 12.0.1-5
warning: mesa: downgrading from version 21.2.5-1 to version 21.2.4-1
warning: opencl-mesa: downgrading from version 21.2.5-1 to version 21.2.4-1
warning: postgresql-libs: downgrading from version 13.4-2 to version 13.4-1
warning: python-dateutil: downgrading from version 2.8.2-2 to version 2.8.2-1
warning: python-html5lib: downgrading from version 1.1-8 to version 1.1-7
warning: qt5-tools: downgrading from version 5.15.2+kde+r17-4 to version 5.15.2+kde+r17-3
warning: qtcreator: downgrading from version 5.0.3-2 to version 5.0.3-1
warning: virtualbox-host-modules-arch: downgrading from version 6.1.28-8 to version 6.1.28-4
warning: vulkan-mesa-layers: downgrading from version 21.2.5-1 to version 21.2.4-1
warning: vulkan-radeon: downgrading from version 21.2.5-1 to version 21.2.4-1
resolving dependencies...
looking for conflicting packages...

Packages (28) audit-3.0.5-1  clang-12.0.1-1  clazy-1.10-1  compiler-rt-12.0.1-2  gnome-screenshot-40.0-2  ldc-3:1.28.0-1  lib32-clang-12.0.1-1
              lib32-librsvg-2:2.52.3-1  lib32-llvm-libs-12.0.1-3  lib32-mesa-21.2.4-1  lib32-opencl-mesa-21.2.4-1  lib32-vulkan-mesa-layers-21.2.4-1
              lib32-vulkan-radeon-21.2.4-1  libclc-12.0.1-1  liblphobos-3:1.28.0-1  librsvg-2:2.52.3-1  linux-5.14.16.arch1-1  llvm-libs-12.0.1-5
              mesa-21.2.4-1  opencl-mesa-21.2.4-1  postgresql-libs-13.4-1  python-dateutil-2.8.2-1  python-html5lib-1.1-7  qt5-tools-5.15.2+kde+r17-3
              qtcreator-5.0.3-1  virtualbox-host-modules-arch-6.1.28-4  vulkan-mesa-layers-21.2.4-1  vulkan-radeon-21.2.4-1

Total Installed Size:  1292.85 MiB
Net Upgrade Size:       -76.14 MiB

:: Proceed with installation? [Y/n] 
(28/28) checking keys in keyring                                                           [####################################################] 100%
(28/28) checking package integrity                                                         [####################################################] 100%
(28/28) loading package files                                                              [####################################################] 100%
(28/28) checking for file conflicts                                                        [####################################################] 100%
(28/28) checking available disk space                                                      [####################################################] 100%
:: Running pre-transaction hooks...
(1/1) Removing linux initcpios...
:: Processing package changes...
( 1/28) downgrading audit                                                                  [####################################################] 100%
( 2/28) downgrading llvm-libs                                                              [####################################################] 100%
( 3/28) downgrading compiler-rt                                                            [####################################################] 100%
( 4/28) downgrading clang                                                                  [####################################################] 100%
( 5/28) downgrading clazy                                                                  [####################################################] 100%
( 6/28) downgrading librsvg                                                                [####################################################] 100%
( 7/28) downgrading mesa                                                                   [####################################################] 100%
( 8/28) downgrading gnome-screenshot                                                       [####################################################] 100%
( 9/28) downgrading liblphobos                                                             [####################################################] 100%
(10/28) downgrading ldc                                                                    [####################################################] 100%
(11/28) downgrading lib32-llvm-libs                                                        [####################################################] 100%
(12/28) downgrading lib32-clang                                                            [####################################################] 100%
(13/28) downgrading lib32-librsvg                                                          [####################################################] 100%
(14/28) downgrading lib32-mesa                                                             [####################################################] 100%
(15/28) downgrading libclc                                                                 [####################################################] 100%
(16/28) downgrading opencl-mesa                                                            [####################################################] 100%
(17/28) downgrading lib32-opencl-mesa                                                      [####################################################] 100%
(18/28) downgrading vulkan-mesa-layers                                                     [####################################################] 100%
(19/28) downgrading lib32-vulkan-mesa-layers                                               [####################################################] 100%
(20/28) downgrading lib32-vulkan-radeon                                                    [####################################################] 100%
(21/28) downgrading linux                                                                  [####################################################] 100%
(22/28) downgrading postgresql-libs                                                        [####################################################] 100%
(23/28) downgrading python-dateutil                                                        [####################################################] 100%
(24/28) downgrading python-html5lib                                                        [####################################################] 100%
(25/28) downgrading qt5-tools                                                              [####################################################] 100%
(26/28) downgrading qtcreator                                                              [####################################################] 100%
(27/28) downgrading virtualbox-host-modules-arch                                           [####################################################] 100%
(28/28) downgrading vulkan-radeon                                                          [####################################################] 100%
:: Running post-transaction hooks...
(1/9) Reloading system manager configuration...
(2/9) Arming ConditionNeedsUpdate...
(3/9) Updating module dependencies...
(4/9) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 5.14.16-arch1-1
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
  -> Running build hook: [modconf]
  -> Running build hook: [numlock]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: xhci_pci
  -> Running build hook: [bcache]
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 5.14.16-arch1-1
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [modconf]
  -> Running build hook: [numlock]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: wd719x
==> WARNING: Possibly missing firmware for module: xhci_pci
  -> Running build hook: [bcache]
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
(5/9) Probing GDK-Pixbuf loader modules...
(6/9) Probing 32-bit GDK-Pixbuf loader modules...
(7/9) Compiling GSettings XML schema files...
(8/9) Updating icon theme caches...
(9/9) Updating the desktop file MIME type cache...
[root@cedric cedric]# 

Now reboot with BIOS f12, and see if suspend still works (it should), and then retest with the latest BIOS (f14e).

cdwijs

Member

Registered: 2010-04-24

Posts: 289

Re: updated BIOS: system immediately resumes from suspend (Gigabyte B550)

Yep, suspend with kernel 5.14 with BIOS f12 works OK. Here's the dmesg from boot, suspend, and resume about 10 seconds later:

[root@cedric cedric]# dmesg 
[    0.000000] Linux version 5.14.16-arch1-1 (linux@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Tue, 02 Nov 2021 22:22:59 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8b90b3e6-d80e-445d-adf5-cc65a591b835 rw rootflags=subvol=root loglevel=3 quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 3376
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009e1ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009e20000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20e000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bc95afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc95b000-0x00000000bcc8cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bcc8d000-0x00000000bccd3fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bccd4000-0x00000000bd351fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd352000-0x00000000bdffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bdfff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000083f380000-0x000000083fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 AORUS PRO AC/B550 AORUS PRO AC, BIOS F12 01/18/2021
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3692.960 MHz processor
[    0.000299] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000301] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000305] last_pfn = 0x83f380 max_arch_pfn = 0x400000000
[    0.001161] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001416] total RAM covered: 3071M
[    0.001526] Found optimal setting for mtrr clean up
[    0.001526]  gran_size: 64K 	chunk_size: 64M 	num_reg: 3  	lose cover RAM: 0G
[    0.001616] e820: update [mem 0xbd740000-0xbd74ffff] usable ==> reserved
[    0.001621] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.001623] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.004177] Using GB pages for direct mapping
[    0.004465] RAMDISK: [mem 0x36ff7000-0x377f2fff]
[    0.004467] ACPI: Early table checksum verification disabled
[    0.004470] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.004473] ACPI: XSDT 0x00000000BD33A728 0000DC (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004476] ACPI: FACP 0x00000000BCCBB000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.004480] ACPI: DSDT 0x00000000BCCB5000 005B11 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.004482] ACPI: FACS 0x00000000BD335000 000040
[    0.004483] ACPI: SSDT 0x00000000BCCCA000 0090C9 (v01 GBT    GSWApp   00000001 INTL 20190509)
[    0.004485] ACPI: SSDT 0x00000000BCCC1000 008C98 (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.004486] ACPI: SSDT 0x00000000BCCBD000 003C65 (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.004488] ACPI: SSDT 0x00000000BCCBC000 0001AD (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.004489] ACPI: FIDT 0x00000000BCCB4000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004490] ACPI: MCFG 0x00000000BCCB3000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.004492] ACPI: HPET 0x00000000BCCB2000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.004493] ACPI: IVRS 0x00000000BCCB0000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000000)
[    0.004494] ACPI: PCCT 0x00000000BCCAF000 00006E (v02 AMD    AmdTable 00000001 AMD  00000000)
[    0.004496] ACPI: SSDT 0x00000000BCCAC000 002FDD (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.004497] ACPI: CRAT 0x00000000BCCAB000 000B18 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.004498] ACPI: CDIT 0x00000000BCCAA000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.004500] ACPI: SSDT 0x00000000BCCA9000 0005F6 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.004501] ACPI: SSDT 0x00000000BCCA7000 0014F6 (v01 AMD    ArticTPX 00000001 INTL 20190509)
[    0.004503] ACPI: SSDT 0x00000000BCCA6000 000788 (v01 AMD    ArticNOI 00000001 INTL 20190509)
[    0.004504] ACPI: SSDT 0x00000000BCCA2000 0036E3 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.004505] ACPI: APIC 0x00000000BCCA0000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.004507] ACPI: SSDT 0x00000000BCC9F000 00008D (v01 AMD    ArticDIS 00000001 INTL 20190509)
[    0.004508] ACPI: SSDT 0x00000000BCC9D000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.004509] ACPI: SSDT 0x00000000BCC9C000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.004511] ACPI: FPDT 0x00000000BCC9B000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004512] ACPI: WSMT 0x00000000BCCA1000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004513] ACPI: Reserving FACP table memory at [mem 0xbccbb000-0xbccbb113]
[    0.004514] ACPI: Reserving DSDT table memory at [mem 0xbccb5000-0xbccbab10]
[    0.004515] ACPI: Reserving FACS table memory at [mem 0xbd335000-0xbd33503f]
[    0.004515] ACPI: Reserving SSDT table memory at [mem 0xbccca000-0xbccd30c8]
[    0.004515] ACPI: Reserving SSDT table memory at [mem 0xbccc1000-0xbccc9c97]
[    0.004516] ACPI: Reserving SSDT table memory at [mem 0xbccbd000-0xbccc0c64]
[    0.004516] ACPI: Reserving SSDT table memory at [mem 0xbccbc000-0xbccbc1ac]
[    0.004517] ACPI: Reserving FIDT table memory at [mem 0xbccb4000-0xbccb409b]
[    0.004517] ACPI: Reserving MCFG table memory at [mem 0xbccb3000-0xbccb303b]
[    0.004518] ACPI: Reserving HPET table memory at [mem 0xbccb2000-0xbccb2037]
[    0.004518] ACPI: Reserving IVRS table memory at [mem 0xbccb0000-0xbccb00cf]
[    0.004518] ACPI: Reserving PCCT table memory at [mem 0xbccaf000-0xbccaf06d]
[    0.004519] ACPI: Reserving SSDT table memory at [mem 0xbccac000-0xbccaefdc]
[    0.004519] ACPI: Reserving CRAT table memory at [mem 0xbccab000-0xbccabb17]
[    0.004520] ACPI: Reserving CDIT table memory at [mem 0xbccaa000-0xbccaa028]
[    0.004520] ACPI: Reserving SSDT table memory at [mem 0xbcca9000-0xbcca95f5]
[    0.004521] ACPI: Reserving SSDT table memory at [mem 0xbcca7000-0xbcca84f5]
[    0.004521] ACPI: Reserving SSDT table memory at [mem 0xbcca6000-0xbcca6787]
[    0.004521] ACPI: Reserving SSDT table memory at [mem 0xbcca2000-0xbcca56e2]
[    0.004522] ACPI: Reserving APIC table memory at [mem 0xbcca0000-0xbcca015d]
[    0.004522] ACPI: Reserving SSDT table memory at [mem 0xbcc9f000-0xbcc9f08c]
[    0.004523] ACPI: Reserving SSDT table memory at [mem 0xbcc9d000-0xbcc9e47e]
[    0.004523] ACPI: Reserving SSDT table memory at [mem 0xbcc9c000-0xbcc9c0be]
[    0.004524] ACPI: Reserving FPDT table memory at [mem 0xbcc9b000-0xbcc9b043]
[    0.004524] ACPI: Reserving WSMT table memory at [mem 0xbcca1000-0xbcca1027]
[    0.004568] No NUMA configuration found
[    0.004569] Faking a node at [mem 0x0000000000000000-0x000000083f37ffff]
[    0.004571] NODE_DATA(0) allocated [mem 0x83f37c000-0x83f37ffff]
[    0.004597] Zone ranges:
[    0.004598]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.004599]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.004599]   Normal   [mem 0x0000000100000000-0x000000083f37ffff]
[    0.004600]   Device   empty
[    0.004601] Movable zone start for each node
[    0.004601] Early memory node ranges
[    0.004601]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.004602]   node   0: [mem 0x0000000000100000-0x0000000009e1ffff]
[    0.004603]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.004603]   node   0: [mem 0x000000000a20e000-0x000000000affffff]
[    0.004604]   node   0: [mem 0x000000000b020000-0x00000000bc95afff]
[    0.004604]   node   0: [mem 0x00000000bdfff000-0x00000000beffffff]
[    0.004605]   node   0: [mem 0x0000000100000000-0x000000083f37ffff]
[    0.004606] Initmem setup node 0 [mem 0x0000000000001000-0x000000083f37ffff]
[    0.004609] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.004619] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.004703] On node 0, zone DMA32: 480 pages in unavailable ranges
[    0.004712] On node 0, zone DMA32: 14 pages in unavailable ranges
[    0.007050] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.007098] On node 0, zone DMA32: 5796 pages in unavailable ranges
[    0.042439] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.042457] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.042993] ACPI: PM-Timer IO Port: 0x808
[    0.042999] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.043010] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.043015] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.043017] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.043018] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.043020] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.043021] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.043025] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[    0.043042] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.043043] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.043044] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.043044] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.043044] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.043045] PM: hibernation: Registered nosave memory: [mem 0x09e20000-0x09ffffff]
[    0.043046] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20dfff]
[    0.043047] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.043048] PM: hibernation: Registered nosave memory: [mem 0xbc95b000-0xbcc8cfff]
[    0.043049] PM: hibernation: Registered nosave memory: [mem 0xbcc8d000-0xbccd3fff]
[    0.043049] PM: hibernation: Registered nosave memory: [mem 0xbccd4000-0xbd351fff]
[    0.043049] PM: hibernation: Registered nosave memory: [mem 0xbd352000-0xbdffefff]
[    0.043050] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.043051] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.043051] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.043051] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
[    0.043052] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[    0.043052] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff]
[    0.043052] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd7fffff]
[    0.043053] PM: hibernation: Registered nosave memory: [mem 0xfd800000-0xfe9fffff]
[    0.043053] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.043054] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.043054] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.043054] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.043055] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.043055] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.043055] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.043056] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.043056] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.043056] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.043057] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.043057] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.043057] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.043058] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.043058] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.043058] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.043059] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.043059] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.043059] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.043060] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.043061] Booting paravirtualized kernel on bare hardware
[    0.043063] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.045445] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1
[    0.046388] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
[    0.046394] pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
[    0.046396] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.046400] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
[    0.046422] Built 1 zonelists, mobility grouping on.  Total pages: 8243874
[    0.046423] Policy zone: Normal
[    0.046424] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8b90b3e6-d80e-445d-adf5-cc65a591b835 rw rootflags=subvol=root loglevel=3 quiet
[    0.046457] Unknown command line parameters: BOOT_IMAGE=/vmlinuz-linux
[    0.046460] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.046461] printk: log_buf_len total cpu_extra contributions: 126976 bytes
[    0.046461] printk: log_buf_len min size: 131072 bytes
[    0.046588] printk: log_buf_len: 262144 bytes
[    0.046589] printk: early log buf free: 116240(88%)
[    0.048560] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.049548] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.049727] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[    0.096895] Memory: 32801180K/33499560K available (14344K kernel code, 2064K rwdata, 9356K rodata, 1804K init, 4076K bss, 698120K reserved, 0K cma-reserved)
[    0.096901] random: get_random_u64 called from __kmem_cache_create+0x2a/0x530 with crng_init=0
[    0.096978] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.096986] ftrace: allocating 42552 entries in 167 pages
[    0.107054] ftrace: allocated 167 pages with 5 groups
[    0.107158] rcu: Preemptible hierarchical RCU implementation.
[    0.107158] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.107159] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
[    0.107159] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.107160] 	Trampoline variant of Tasks RCU enabled.
[    0.107160] 	Rude variant of Tasks RCU enabled.
[    0.107161] 	Tracing variant of Tasks RCU enabled.
[    0.107161] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.107162] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.108962] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
[    0.109191] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.109292] spurious 8259A interrupt: IRQ7.
[    0.109303] Console: colour dummy device 80x25
[    0.109310] printk: console [tty0] enabled
[    0.109325] ACPI: Core revision 20210604
[    0.109424] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.109440] APIC: Switch to symmetric I/O mode setup
[    0.110216] Switched APIC routing to physical flat.
[    0.110843] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.126107] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6a76b81ff0b, max_idle_ns: 881590742113 ns
[    0.126112] Calibrating delay loop (skipped), value calculated using timer frequency.. 7388.66 BogoMIPS (lpj=12309866)
[    0.126113] pid_max: default: 32768 minimum: 301
[    0.126129] LSM: Security Framework initializing
[    0.126134] landlock: Up and running.
[    0.126135] Yama: becoming mindful.
[    0.126139] LSM support for eBPF active
[    0.126177] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.126216] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.126370] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.126412] LVT offset 1 assigned for vector 0xf9
[    0.126537] LVT offset 2 assigned for vector 0xf4
[    0.126569] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[    0.126569] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.126572] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.126573] Spectre V2 : Mitigation: Full AMD retpoline
[    0.126573] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.126574] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.126575] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.126575] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.126576] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.128447] Freeing SMP alternatives memory: 36K
[    0.239105] smpboot: CPU0: AMD Ryzen 5 5600X 6-Core Processor (family: 0x19, model: 0x21, stepping: 0x0)
[    0.239199] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.239203] ... version:                0
[    0.239203] ... bit width:              48
[    0.239203] ... generic registers:      6
[    0.239204] ... value mask:             0000ffffffffffff
[    0.239204] ... max period:             00007fffffffffff
[    0.239205] ... fixed-purpose events:   0
[    0.239205] ... event mask:             000000000000003f
[    0.239239] rcu: Hierarchical SRCU implementation.
[    0.239443] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.239443] smp: Bringing up secondary CPUs ...
[    0.239443] x86: Booting SMP configuration:
[    0.239443] .... node  #0, CPUs:        #1
[    0.003630] __common_interrupt: 1.55 No irq handler for vector
[    0.239512]   #2
[    0.003630] __common_interrupt: 2.55 No irq handler for vector
[    0.241629]   #3
[    0.003630] __common_interrupt: 3.55 No irq handler for vector
[    0.244849]   #4
[    0.003630] __common_interrupt: 4.55 No irq handler for vector
[    0.246164]   #5
[    0.003630] __common_interrupt: 5.55 No irq handler for vector
[    0.248265]   #6
[    0.003630] __common_interrupt: 6.55 No irq handler for vector
[    0.251496] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.251496]   #7
[    0.003630] __common_interrupt: 7.55 No irq handler for vector
[    0.252830]   #8
[    0.003630] __common_interrupt: 8.55 No irq handler for vector
[    0.254942]   #9
[    0.003630] __common_interrupt: 9.55 No irq handler for vector
[    0.258119]  #10
[    0.003630] __common_interrupt: 10.55 No irq handler for vector
[    0.259498]  #11
[    0.261595] smp: Brought up 1 node, 12 CPUs
[    0.261595] smpboot: Max logical packages: 3
[    0.261595] smpboot: Total of 12 processors activated (88666.99 BogoMIPS)
[    0.263104] devtmpfs: initialized
[    0.263104] x86/mm: Memory block size: 128MB
[    0.263562] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20dfff] (57344 bytes)
[    0.263562] ACPI: PM: Registering ACPI NVS region [mem 0xbccd4000-0xbd351fff] (6807552 bytes)
[    0.263562] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.263562] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.263562] pinctrl core: initialized pinctrl subsystem
[    0.263562] PM: RTC time: 08:14:20, date: 2021-11-17
[    0.263562] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.263562] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.263562] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.263593] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.263597] audit: initializing netlink subsys (disabled)
[    0.263601] audit: type=2000 audit(1637136860.153:1): state=initialized audit_enabled=0 res=1
[    0.263601] thermal_sys: Registered thermal governor 'fair_share'
[    0.263601] thermal_sys: Registered thermal governor 'bang_bang'
[    0.263601] thermal_sys: Registered thermal governor 'step_wise'
[    0.263601] thermal_sys: Registered thermal governor 'user_space'
[    0.263601] thermal_sys: Registered thermal governor 'power_allocator'
[    0.263601] cpuidle: using governor ladder
[    0.263601] cpuidle: using governor menu
[    0.263601] Detected 1 PCC Subspaces
[    0.263601] Registering PCC driver as Mailbox controller
[    0.263601] HugeTLB: can free 4094 vmemmap pages for hugepages-1048576kB
[    0.263601] ACPI: bus type PCI registered
[    0.263601] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.263601] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.263601] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.263601] PCI: Using configuration type 1 for base access
[    0.266308] Kprobes globally optimized
[    0.266312] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[    0.266312] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.266312] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.266312] fbcon: Taking over console
[    0.266312] ACPI: Added _OSI(Module Device)
[    0.266312] ACPI: Added _OSI(Processor Device)
[    0.266312] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.266312] ACPI: Added _OSI(Processor Aggregator Device)
[    0.266312] ACPI: Added _OSI(Linux-Dell-Video)
[    0.266312] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.266312] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.274834] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.275355] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.282460] ACPI: Interpreter enabled
[    0.282471] ACPI: PM: (supports S0 S3 S4 S5)
[    0.282471] ACPI: Using IOAPIC for interrupt routing
[    0.282654] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.282913] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.287822] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.287825] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.287970] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.287976] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.288196] PCI host bridge to bus 0000:00
[    0.288197] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.288198] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.288198] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.288199] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.288199] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.288200] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.288201] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.288201] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.288202] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.288211] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[    0.288299] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
[    0.288393] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[    0.288459] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
[    0.288531] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.288633] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
[    0.288659] pci 0000:00:01.2: enabling Extended Tags
[    0.288705] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.288800] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[    0.288866] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[    0.288931] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[    0.289002] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.289361] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[    0.289428] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[    0.289514] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[    0.289579] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[    0.289603] pci 0000:00:07.1: enabling Extended Tags
[    0.289643] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.289732] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[    0.289797] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[    0.289823] pci 0000:00:08.1: enabling Extended Tags
[    0.289866] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.289971] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.290081] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.290199] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[    0.290238] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[    0.290275] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[    0.290312] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[    0.290349] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[    0.290386] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[    0.290423] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[    0.290460] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[    0.290550] pci 0000:01:00.0: [144d:a80a] type 00 class 0x010802
[    0.290567] pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
[    0.290758] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.290763] pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.290805] pci 0000:02:00.0: [1022:43ee] type 00 class 0x0c0330
[    0.290823] pci 0000:02:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit]
[    0.290866] pci 0000:02:00.0: enabling Extended Tags
[    0.290923] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.290995] pci 0000:02:00.1: [1022:43eb] type 00 class 0x010601
[    0.291046] pci 0000:02:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff]
[    0.291054] pci 0000:02:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref]
[    0.291060] pci 0000:02:00.1: enabling Extended Tags
[    0.291106] pci 0000:02:00.1: PME# supported from D3hot D3cold
[    0.291157] pci 0000:02:00.2: [1022:43e9] type 01 class 0x060400
[    0.291204] pci 0000:02:00.2: enabling Extended Tags
[    0.291254] pci 0000:02:00.2: PME# supported from D3hot D3cold
[    0.291318] pci 0000:00:01.2: PCI bridge to [bus 02-09]
[    0.291321] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.291323] pci 0000:00:01.2:   bridge window [mem 0xfcb00000-0xfcdfffff]
[    0.291370] pci 0000:03:00.0: [1022:43ea] type 01 class 0x060400
[    0.291420] pci 0000:03:00.0: enabling Extended Tags
[    0.291475] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.291544] pci 0000:03:04.0: [1022:43ea] type 01 class 0x060400
[    0.291594] pci 0000:03:04.0: enabling Extended Tags
[    0.291650] pci 0000:03:04.0: PME# supported from D3hot D3cold
[    0.291716] pci 0000:03:06.0: [1022:43ea] type 01 class 0x060400
[    0.291766] pci 0000:03:06.0: enabling Extended Tags
[    0.291822] pci 0000:03:06.0: PME# supported from D3hot D3cold
[    0.291888] pci 0000:03:07.0: [1022:43ea] type 01 class 0x060400
[    0.291938] pci 0000:03:07.0: enabling Extended Tags
[    0.291993] pci 0000:03:07.0: PME# supported from D3hot D3cold
[    0.292062] pci 0000:03:08.0: [1022:43ea] type 01 class 0x060400
[    0.292112] pci 0000:03:08.0: enabling Extended Tags
[    0.292168] pci 0000:03:08.0: PME# supported from D3hot D3cold
[    0.292236] pci 0000:03:09.0: [1022:43ea] type 01 class 0x060400
[    0.292286] pci 0000:03:09.0: enabling Extended Tags
[    0.292342] pci 0000:03:09.0: PME# supported from D3hot D3cold
[    0.292417] pci 0000:02:00.2: PCI bridge to [bus 03-09]
[    0.292422] pci 0000:02:00.2:   bridge window [io  0xf000-0xffff]
[    0.292425] pci 0000:02:00.2:   bridge window [mem 0xfcb00000-0xfccfffff]
[    0.292458] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.292500] pci 0000:03:04.0: PCI bridge to [bus 05]
[    0.292541] pci 0000:03:06.0: PCI bridge to [bus 06]
[    0.292583] pci 0000:03:07.0: PCI bridge to [bus 07]
[    0.292663] pci 0000:08:00.0: [10ec:8125] type 00 class 0x020000
[    0.292688] pci 0000:08:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.292722] pci 0000:08:00.0: reg 0x18: [mem 0xfcc00000-0xfcc0ffff 64bit]
[    0.292743] pci 0000:08:00.0: reg 0x20: [mem 0xfcc10000-0xfcc13fff 64bit]
[    0.292894] pci 0000:08:00.0: supports D1 D2
[    0.292895] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.293063] pci 0000:03:08.0: PCI bridge to [bus 08]
[    0.293068] pci 0000:03:08.0:   bridge window [io  0xf000-0xffff]
[    0.293070] pci 0000:03:08.0:   bridge window [mem 0xfcc00000-0xfccfffff]
[    0.293136] pci 0000:09:00.0: [8086:2526] type 00 class 0x028000
[    0.293171] pci 0000:09:00.0: reg 0x10: [mem 0xfcb00000-0xfcb03fff 64bit]
[    0.293355] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[    0.293473] pci 0000:03:09.0: PCI bridge to [bus 09]
[    0.293480] pci 0000:03:09.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.293573] pci 0000:0a:00.0: [1002:699f] type 00 class 0x030000
[    0.293590] pci 0000:0a:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.293601] pci 0000:0a:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.293609] pci 0000:0a:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.293616] pci 0000:0a:00.0: reg 0x24: [mem 0xfce00000-0xfce3ffff]
[    0.293623] pci 0000:0a:00.0: reg 0x30: [mem 0xfce40000-0xfce5ffff pref]
[    0.293709] pci 0000:0a:00.0: supports D1 D2
[    0.293710] pci 0000:0a:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.293825] pci 0000:0a:00.1: [1002:aae0] type 00 class 0x040300
[    0.293842] pci 0000:0a:00.1: reg 0x10: [mem 0xfce60000-0xfce63fff 64bit]
[    0.293935] pci 0000:0a:00.1: supports D1 D2
[    0.294018] pci 0000:00:03.1: PCI bridge to [bus 0a]
[    0.294021] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.294023] pci 0000:00:03.1:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.294026] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.296111] pci 0000:0b:00.0: [1022:148a] type 00 class 0x130000
[    0.296111] pci 0000:0b:00.0: enabling Extended Tags
[    0.296111] pci 0000:00:07.1: PCI bridge to [bus 0b]
[    0.296111] pci 0000:0c:00.0: [1022:1485] type 00 class 0x130000
[    0.296111] pci 0000:0c:00.0: enabling Extended Tags
[    0.296111] pci 0000:0c:00.1: [1022:1486] type 00 class 0x108000
[    0.296111] pci 0000:0c:00.1: reg 0x18: [mem 0xfc900000-0xfc9fffff]
[    0.296111] pci 0000:0c:00.1: reg 0x24: [mem 0xfca08000-0xfca09fff]
[    0.296111] pci 0000:0c:00.1: enabling Extended Tags
[    0.296111] pci 0000:0c:00.3: [1022:149c] type 00 class 0x0c0330
[    0.296111] pci 0000:0c:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit]
[    0.296111] pci 0000:0c:00.3: enabling Extended Tags
[    0.296111] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
[    0.296111] pci 0000:0c:00.4: [1022:1487] type 00 class 0x040300
[    0.296111] pci 0000:0c:00.4: reg 0x10: [mem 0xfca00000-0xfca07fff]
[    0.296111] pci 0000:0c:00.4: enabling Extended Tags
[    0.296111] pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold
[    0.296111] pci 0000:00:08.1: PCI bridge to [bus 0c]
[    0.296111] pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfcafffff]
[    0.296111] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.296111] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.296111] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.296111] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.296111] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.296111] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.296111] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.296111] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.296111] iommu: Default domain type: Translated 
[    0.296119] pci 0000:0a:00.0: vgaarb: setting as boot VGA device
[    0.296119] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.296119] pci 0000:0a:00.0: vgaarb: bridge control possible
[    0.296119] vgaarb: loaded
[    0.296197] SCSI subsystem initialized
[    0.296202] libata version 3.00 loaded.
[    0.296202] ACPI: bus type USB registered
[    0.296202] usbcore: registered new interface driver usbfs
[    0.296202] usbcore: registered new interface driver hub
[    0.296202] usbcore: registered new device driver usb
[    0.296202] pps_core: LinuxPPS API ver. 1 registered
[    0.296202] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.296202] PTP clock support registered
[    0.296202] EDAC MC: Ver: 3.0.0
[    0.296232] NetLabel: Initializing
[    0.296232] NetLabel:  domain hash size = 128
[    0.296232] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.296232] NetLabel:  unlabeled traffic allowed by default
[    0.296232] PCI: Using ACPI for IRQ routing
[    0.299850] PCI: pci_cache_line_size set to 64 bytes
[    0.299919] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.299920] e820: reserve RAM buffer [mem 0x09e20000-0x0bffffff]
[    0.299921] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.299921] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.299921] e820: reserve RAM buffer [mem 0xbc95b000-0xbfffffff]
[    0.299922] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.299923] e820: reserve RAM buffer [mem 0x83f380000-0x83fffffff]
[    0.299926] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.299926] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.302778] clocksource: Switched to clocksource tsc-early
[    0.307101] VFS: Disk quotas dquot_6.6.0
[    0.307112] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.307159] pnp: PnP ACPI init
[    0.307227] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.307284] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
[    0.307459] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.307460] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.307461] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.307463] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.307676] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.307678] system 00:04: [io  0x040b] has been reserved
[    0.307679] system 00:04: [io  0x04d6] has been reserved
[    0.307680] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.307681] system 00:04: [io  0x0c14] has been reserved
[    0.307682] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.307683] system 00:04: [io  0x0c52] has been reserved
[    0.307684] system 00:04: [io  0x0c6c] has been reserved
[    0.307685] system 00:04: [io  0x0c6f] has been reserved
[    0.307686] system 00:04: [io  0x0cd0-0x0cd1] has been reserved
[    0.307687] system 00:04: [io  0x0cd2-0x0cd3] has been reserved
[    0.307688] system 00:04: [io  0x0cd4-0x0cd5] has been reserved
[    0.307689] system 00:04: [io  0x0cd6-0x0cd7] has been reserved
[    0.307690] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.307691] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.307692] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.307693] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.307694] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.307695] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.307697] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.307698] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.307700] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.307701] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.307703] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.307704] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.307706] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.308231] pnp: PnP ACPI: found 5 devices
[    0.313488] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.313523] NET: Registered PF_INET protocol family
[    0.313666] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.314552] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.314706] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.314885] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.314935] TCP: Hash tables configured (established 262144 bind 65536)
[    0.315033] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.315090] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.315151] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.315214] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.315217] NET: Registered PF_XDP protocol family
[    0.315223] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.315227] pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.315231] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.315242] pci 0000:03:04.0: PCI bridge to [bus 05]
[    0.315252] pci 0000:03:06.0: PCI bridge to [bus 06]
[    0.315263] pci 0000:03:07.0: PCI bridge to [bus 07]
[    0.315273] pci 0000:03:08.0: PCI bridge to [bus 08]
[    0.315275] pci 0000:03:08.0:   bridge window [io  0xf000-0xffff]
[    0.315279] pci 0000:03:08.0:   bridge window [mem 0xfcc00000-0xfccfffff]
[    0.315286] pci 0000:03:09.0: PCI bridge to [bus 09]
[    0.315290] pci 0000:03:09.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.315297] pci 0000:02:00.2: PCI bridge to [bus 03-09]
[    0.315298] pci 0000:02:00.2:   bridge window [io  0xf000-0xffff]
[    0.315302] pci 0000:02:00.2:   bridge window [mem 0xfcb00000-0xfccfffff]
[    0.315309] pci 0000:00:01.2: PCI bridge to [bus 02-09]
[    0.315310] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.315312] pci 0000:00:01.2:   bridge window [mem 0xfcb00000-0xfcdfffff]
[    0.315316] pci 0000:00:03.1: PCI bridge to [bus 0a]
[    0.315317] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.315320] pci 0000:00:03.1:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.315321] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.315324] pci 0000:00:07.1: PCI bridge to [bus 0b]
[    0.315330] pci 0000:00:08.1: PCI bridge to [bus 0c]
[    0.315333] pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfcafffff]
[    0.315337] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.315338] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.315338] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.315339] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.315340] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.315340] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.315341] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfec2ffff window]
[    0.315341] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.315342] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.315342] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.315343] pci_bus 0000:02: resource 1 [mem 0xfcb00000-0xfcdfffff]
[    0.315344] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.315344] pci_bus 0000:03: resource 1 [mem 0xfcb00000-0xfccfffff]
[    0.315345] pci_bus 0000:08: resource 0 [io  0xf000-0xffff]
[    0.315345] pci_bus 0000:08: resource 1 [mem 0xfcc00000-0xfccfffff]
[    0.315346] pci_bus 0000:09: resource 1 [mem 0xfcb00000-0xfcbfffff]
[    0.315346] pci_bus 0000:0a: resource 0 [io  0xe000-0xefff]
[    0.315347] pci_bus 0000:0a: resource 1 [mem 0xfce00000-0xfcefffff]
[    0.315347] pci_bus 0000:0a: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.315348] pci_bus 0000:0c: resource 1 [mem 0xfc800000-0xfcafffff]
[    0.315484] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.315494] pci 0000:0a:00.1: D0 power state depends on 0000:0a:00.0
[    0.315615] PCI: CLS 64 bytes, default 64
[    0.315624] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.315635] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.315647] Trying to unpack rootfs image as initramfs...
[    0.315649] pci 0000:00:01.0: Adding to iommu group 0
[    0.315658] pci 0000:00:01.1: Adding to iommu group 1
[    0.315666] pci 0000:00:01.2: Adding to iommu group 2
[    0.315675] pci 0000:00:02.0: Adding to iommu group 3
[    0.315685] pci 0000:00:03.0: Adding to iommu group 4
[    0.315692] pci 0000:00:03.1: Adding to iommu group 5
[    0.315700] pci 0000:00:04.0: Adding to iommu group 6
[    0.315709] pci 0000:00:05.0: Adding to iommu group 7
[    0.315718] pci 0000:00:07.0: Adding to iommu group 8
[    0.315724] pci 0000:00:07.1: Adding to iommu group 9
[    0.315735] pci 0000:00:08.0: Adding to iommu group 10
[    0.315743] pci 0000:00:08.1: Adding to iommu group 11
[    0.315755] pci 0000:00:14.0: Adding to iommu group 12
[    0.315761] pci 0000:00:14.3: Adding to iommu group 12
[    0.315788] pci 0000:00:18.0: Adding to iommu group 13
[    0.315794] pci 0000:00:18.1: Adding to iommu group 13
[    0.315800] pci 0000:00:18.2: Adding to iommu group 13
[    0.315807] pci 0000:00:18.3: Adding to iommu group 13
[    0.315813] pci 0000:00:18.4: Adding to iommu group 13
[    0.315820] pci 0000:00:18.5: Adding to iommu group 13
[    0.315826] pci 0000:00:18.6: Adding to iommu group 13
[    0.315833] pci 0000:00:18.7: Adding to iommu group 13
[    0.315843] pci 0000:01:00.0: Adding to iommu group 14
[    0.315856] pci 0000:02:00.0: Adding to iommu group 15
[    0.315862] pci 0000:02:00.1: Adding to iommu group 15
[    0.315867] pci 0000:02:00.2: Adding to iommu group 15
[    0.315869] pci 0000:03:00.0: Adding to iommu group 15
[    0.315871] pci 0000:03:04.0: Adding to iommu group 15
[    0.315873] pci 0000:03:06.0: Adding to iommu group 15
[    0.315874] pci 0000:03:07.0: Adding to iommu group 15
[    0.315876] pci 0000:03:08.0: Adding to iommu group 15
[    0.315878] pci 0000:03:09.0: Adding to iommu group 15
[    0.315880] pci 0000:08:00.0: Adding to iommu group 15
[    0.315881] pci 0000:09:00.0: Adding to iommu group 15
[    0.315900] pci 0000:0a:00.0: Adding to iommu group 16
[    0.315905] pci 0000:0a:00.1: Adding to iommu group 16
[    0.315910] pci 0000:0b:00.0: Adding to iommu group 17
[    0.315917] pci 0000:0c:00.0: Adding to iommu group 18
[    0.315923] pci 0000:0c:00.1: Adding to iommu group 19
[    0.315929] pci 0000:0c:00.3: Adding to iommu group 20
[    0.315935] pci 0000:0c:00.4: Adding to iommu group 21
[    0.318847] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.318849] AMD-Vi: Extended features (0x58f77ef22294ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
[    0.318852] AMD-Vi: Interrupt remapping enabled
[    0.318852] AMD-Vi: Virtual APIC enabled
[    0.318852] AMD-Vi: X2APIC enabled
[    0.318934] amd_uncore: 4  amd_df counters detected
[    0.318938] amd_uncore: 6  amd_l3 counters detected
[    0.319079] LVT offset 0 assigned for vector 0x400
[    0.319128] perf: AMD IBS detected (0x000003ff)
[    0.319131] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.319869] Initialise system trusted keyrings
[    0.319876] Key type blacklist registered
[    0.319899] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.320362] zbud: loaded
[    0.322747] Key type asymmetric registered
[    0.322748] Asymmetric key parser 'x509' registered
[    0.322752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.322776] io scheduler mq-deadline registered
[    0.322777] io scheduler kyber registered
[    0.322793] io scheduler bfq registered
[    0.322943] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[    0.322977] pcieport 0000:00:01.1: AER: enabled with IRQ 26
[    0.323076] pcieport 0000:00:01.2: PME: Signaling with IRQ 27
[    0.323120] pcieport 0000:00:01.2: AER: enabled with IRQ 27
[    0.323214] pcieport 0000:00:03.1: PME: Signaling with IRQ 28
[    0.323247] pcieport 0000:00:03.1: AER: enabled with IRQ 28
[    0.323380] pcieport 0000:00:07.1: PME: Signaling with IRQ 30
[    0.323413] pcieport 0000:00:07.1: AER: enabled with IRQ 30
[    0.323495] pcieport 0000:00:08.1: PME: Signaling with IRQ 31
[    0.323527] pcieport 0000:00:08.1: AER: enabled with IRQ 31
[    0.324366] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.324378] vesafb: mode is 3840x2160x32, linelength=15360, pages=0
[    0.324379] vesafb: scrolling: redraw
[    0.324380] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.324385] vesafb: framebuffer at 0xd0000000, mapped to 0x000000006d42f97d, using 32448k, total 32448k
[    0.324427] Console: switching to colour frame buffer device 240x67
[    0.339721] Freeing initrd memory: 8176K
[    0.539606] fb0: VESA VGA frame buffer device
[    0.539680] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.539693] ACPI: button: Power Button [PWRB]
[    0.539710] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.540234] ACPI: button: Power Button [PWRF]
[    0.543568] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1155
[    0.543579] Monitor-Mwait will be used to enter C-1 state
[    0.543582] ACPI: \_SB_.PLTF.C000: Found 2 idle states
[    0.543649] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[    0.543704] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[    0.543772] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[    0.543820] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[    0.543882] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[    0.543928] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[    0.543990] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[    0.544051] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[    0.544113] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[    0.544176] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[    0.544235] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[    0.544361] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.545060] Non-volatile memory driver v1.3
[    0.545061] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.545442] nvme nvme0: pci function 0000:01:00.0
[    0.545462] ahci 0000:02:00.1: version 3.0
[    0.545583] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[    0.545641] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.545643] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.545880] scsi host0: ahci
[    0.545932] scsi host1: ahci
[    0.545969] scsi host2: ahci
[    0.546001] scsi host3: ahci
[    0.546036] scsi host4: ahci
[    0.546069] scsi host5: ahci
[    0.546083] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 45
[    0.546085] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 45
[    0.546087] ata3: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80200 irq 45
[    0.546088] ata4: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80280 irq 45
[    0.546090] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 45
[    0.546091] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 45
[    0.546112] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.546114] ehci-pci: EHCI PCI platform driver
[    0.546120] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.546121] ohci-pci: OHCI PCI platform driver
[    0.546124] uhci_hcd: USB Universal Host Controller Interface driver
[    0.546140] usbcore: registered new interface driver usbserial_generic
[    0.546142] usbserial: USB Serial support registered for generic
[    0.546176] rtc_cmos 00:02: RTC can wake from S4
[    0.546332] rtc_cmos 00:02: registered as rtc0
[    0.546374] rtc_cmos 00:02: setting system clock to 2021-11-17T08:14:21 UTC (1637136861)
[    0.546381] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.546445] ledtrig-cpu: registered to indicate activity on CPUs
[    0.546508] hid: raw HID events driver (C) Jiri Kosina
[    0.546534] drop_monitor: Initializing network drop monitor service
[    0.546567] Initializing XFRM netlink socket
[    0.546605] NET: Registered PF_INET6 protocol family
[    0.548704] Segment Routing with IPv6
[    0.548705] RPL Segment Routing with IPv6
[    0.548717] NET: Registered PF_PACKET protocol family
[    0.549120] microcode: CPU0: patch_level=0x0a201009
[    0.549126] microcode: CPU1: patch_level=0x0a201009
[    0.549131] microcode: CPU2: patch_level=0x0a201009
[    0.549137] microcode: CPU3: patch_level=0x0a201009
[    0.549142] microcode: CPU4: patch_level=0x0a201009
[    0.549147] microcode: CPU5: patch_level=0x0a201009
[    0.549149] microcode: CPU6: patch_level=0x0a201009
[    0.549155] microcode: CPU7: patch_level=0x0a201009
[    0.549158] microcode: CPU8: patch_level=0x0a201009
[    0.549162] microcode: CPU9: patch_level=0x0a201009
[    0.549166] microcode: CPU10: patch_level=0x0a201009
[    0.549170] microcode: CPU11: patch_level=0x0a201009
[    0.549172] microcode: Microcode Update Driver: v2.2.
[    0.549247] resctrl: L3 allocation detected
[    0.549247] resctrl: L3DATA allocation detected
[    0.549248] resctrl: L3CODE allocation detected
[    0.549248] resctrl: MB allocation detected
[    0.549249] resctrl: L3 monitoring detected
[    0.549250] IPI shorthand broadcast: enabled
[    0.549257] sched_clock: Marking stable (548944230, 297642)->(596845549, -47603677)
[    0.549446] registered taskstats version 1
[    0.549551] Loading compiled-in X.509 certificates
[    0.550591] Loaded X.509 cert 'Build time autogenerated kernel key: 4bf053f8e5c4b77ad32d170608834d80a907d8c3'
[    0.551308] zswap: loaded using pool lz4/z3fold
[    0.551389] Key type ._fscrypt registered
[    0.551390] Key type .fscrypt registered
[    0.551391] Key type fscrypt-provisioning registered
[    0.551556] PM:   Magic number: 13:323:220
[    0.551599] dmi id: hash matches
[    0.551619] memory memory102: hash matches
[    0.551673] RAS: Correctable Errors collector initialized.
[    0.559550] nvme nvme0: Shutdown timeout set to 10 seconds
[    0.565661] nvme nvme0: 32/0/0 default/read/poll queues
[    0.567651]  nvme0n1: p1 p2
[    0.860198] ata1: SATA link down (SStatus 0 SControl 300)
[    1.326227] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.328517] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100
[    1.329530] ata2.00: configured for UDMA/100
[    1.330962] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB00 PQ: 0 ANSI: 5
[    1.332791] tsc: Refined TSC clocksource calibration: 3693.063 MHz
[    1.332795] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a7779d5e21, max_idle_ns: 881590797124 ns
[    1.332982] clocksource: Switched to clocksource tsc
[    1.684592] ata3: SATA link down (SStatus 0 SControl 300)
[    1.997825] ata4: SATA link down (SStatus 0 SControl 300)
[    2.311285] ata5: SATA link down (SStatus 0 SControl 330)
[    3.342879] ata6: failed to resume link (SControl 0)
[    3.342897] ata6: SATA link down (SStatus 0 SControl 0)
[    3.343585] Freeing unused decrypted memory: 2036K
[    3.343793] Freeing unused kernel image (initmem) memory: 1804K
[    3.343795] Write protecting the kernel read-only data: 26624k
[    3.344167] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    3.344325] Freeing unused kernel image (rodata/data gap) memory: 884K
[    3.365069] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.365072] rodata_test: all tests were successful
[    3.365074] Run /init as init process
[    3.365075]   with arguments:
[    3.365075]     /init
[    3.365076]   with environment:
[    3.365076]     HOME=/
[    3.365076]     TERM=linux
[    3.365077]     BOOT_IMAGE=/vmlinuz-linux
[    3.412140] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.412147] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    3.418202] raid6: skip pq benchmark and using algorithm avx2x4
[    3.418204] raid6: using avx2x2 recovery algorithm
[    3.418716] xor: automatically using best checksumming function   avx       
[    3.452852] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.452854] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.453427] Btrfs loaded, crc32c=crc32c-intel, zoned=yes
[    3.453683] BTRFS: device fsid 8b90b3e6-d80e-445d-adf5-cc65a591b835 devid 1 transid 3365 /dev/nvme0n1p2 scanned by systemd-udevd (225)
[    3.509258] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    3.509581] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.509585] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    3.509586] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    3.509626] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[    3.509627] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.509628] usb usb1: Product: xHCI Host Controller
[    3.509629] usb usb1: Manufacturer: Linux 5.14.16-arch1-1 xhci-hcd
[    3.509629] usb usb1: SerialNumber: 0000:02:00.0
[    3.509688] hub 1-0:1.0: USB hub found
[    3.509701] hub 1-0:1.0: 10 ports detected
[    3.509831] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.509839] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[    3.509840] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.509841] usb usb2: Product: xHCI Host Controller
[    3.509841] usb usb2: Manufacturer: Linux 5.14.16-arch1-1 xhci-hcd
[    3.509842] usb usb2: SerialNumber: 0000:02:00.0
[    3.509878] hub 2-0:1.0: USB hub found
[    3.509884] hub 2-0:1.0: 4 ports detected
[    3.509912] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.510019] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[    3.510021] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3
[    3.510128] xhci_hcd 0000:0c:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[    3.510381] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[    3.510383] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4
[    3.510384] xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    3.510398] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[    3.510399] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.510400] usb usb3: Product: xHCI Host Controller
[    3.510400] usb usb3: Manufacturer: Linux 5.14.16-arch1-1 xhci-hcd
[    3.510401] usb usb3: SerialNumber: 0000:0c:00.3
[    3.510451] hub 3-0:1.0: USB hub found
[    3.510456] hub 3-0:1.0: 4 ports detected
[    3.510582] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.510591] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[    3.510591] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.510592] usb usb4: Product: xHCI Host Controller
[    3.510593] usb usb4: Manufacturer: Linux 5.14.16-arch1-1 xhci-hcd
[    3.510593] usb usb4: SerialNumber: 0000:0c:00.3
[    3.510629] hub 4-0:1.0: USB hub found
[    3.510634] hub 4-0:1.0: 4 ports detected
[    3.826130] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[    3.882565] BTRFS info (device nvme0n1p2): flagging fs with big metadata feature
[    3.882567] BTRFS info (device nvme0n1p2): disk space caching is enabled
[    3.882568] BTRFS info (device nvme0n1p2): has skinny extents
[    3.895623] random: fast init done
[    3.904252] BTRFS info (device nvme0n1p2): enabling ssd optimizations
[    3.970696] systemd[1]: systemd 249.6-3-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    3.986142] systemd[1]: Detected architecture x86-64.
[    3.986397] systemd[1]: Hostname set to <cedric>.
[    4.011100] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    4.039334] systemd[1]: Queued start job for default target Graphical Interface.
[    4.039871] systemd[1]: Created slice Slice /system/getty.
[    4.039997] systemd[1]: Created slice Slice /system/modprobe.
[    4.040146] systemd[1]: Created slice Slice /system/syslog-ng.
[    4.040244] systemd[1]: Created slice Slice /system/systemd-fsck.
[    4.040325] systemd[1]: Created slice User and Session Slice.
[    4.040356] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.040376] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.040441] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.040457] systemd[1]: Reached target Local Encrypted Volumes.
[    4.040472] systemd[1]: Reached target Remote File Systems.
[    4.040478] systemd[1]: Reached target Slice Units.
[    4.040485] systemd[1]: Reached target Swaps.
[    4.040495] systemd[1]: Reached target Local Verity Protected Volumes.
[    4.040521] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.040689] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.041118] systemd[1]: Listening on Process Core Dump Socket.
[    4.041175] systemd[1]: Listening on Journal Audit Socket.
[    4.041211] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.041253] systemd[1]: Listening on Journal Socket.
[    4.041540] systemd[1]: Listening on udev Control Socket.
[    4.041575] systemd[1]: Listening on udev Kernel Socket.
[    4.041866] systemd[1]: Mounting Huge Pages File System...
[    4.042181] systemd[1]: Mounting POSIX Message Queue File System...
[    4.042470] systemd[1]: Mounting Kernel Debug File System...
[    4.042787] systemd[1]: Mounting Kernel Trace File System...
[    4.043084] systemd[1]: Mounting Temporary Directory /tmp...
[    4.043471] systemd[1]: Starting Create List of Static Device Nodes...
[    4.043771] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.044081] systemd[1]: Starting Load Kernel Module configfs...
[    4.044391] systemd[1]: Starting Load Kernel Module drm...
[    4.044745] systemd[1]: Starting Load Kernel Module fuse...
[    4.045012] random: lvm: uninitialized urandom read (4 bytes read)
[    4.045098] systemd[1]: Starting Set Up Additional Binary Formats...
[    4.045879] systemd[1]: Starting Journal Service...
[    4.046317] systemd[1]: Starting Load Kernel Modules...
[    4.046738] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.046780] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    4.047269] systemd[1]: Starting Coldplug All udev Devices...
[    4.048060] systemd[1]: Mounted Huge Pages File System.
[    4.048106] systemd[1]: Mounted POSIX Message Queue File System.
[    4.048145] systemd[1]: Mounted Kernel Debug File System.
[    4.048176] systemd[1]: Mounted Kernel Trace File System.
[    4.048207] systemd[1]: Mounted Temporary Directory /tmp.
[    4.048315] systemd[1]: Finished Create List of Static Device Nodes.
[    4.048503] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.048595] fuse: init (API version 7.34)
[    4.048604] systemd[1]: Finished Load Kernel Module configfs.
[    4.048656] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 323 (systemd-binfmt)
[    4.049116] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    4.049423] systemd[1]: Mounting Kernel Configuration File System...
[    4.049548] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.049629] systemd[1]: Finished Load Kernel Module fuse.
[    4.049971] systemd[1]: Mounting FUSE Control File System...
[    4.055345] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.055436] systemd[1]: Finished Load Kernel Module drm.
[    4.055741] usb 1-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    4.055743] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.055744] usb 1-6: Product: USB2.0 Hub
[    4.057467] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    4.057516] systemd[1]: Mounted Kernel Configuration File System.
[    4.057547] systemd[1]: Mounted FUSE Control File System.
[    4.057854] systemd[1]: Finished Set Up Additional Binary Formats.
[    4.059795] vboxdrv: loading out-of-tree module taints kernel.
[    4.059938] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    4.062133] vboxdrv: Found 12 processor cores
[    4.062750] hub 1-6:1.0: USB hub found
[    4.066733] hub 1-6:1.0: 4 ports detected
[    4.078883] systemd[1]: Started Journal Service.
[    4.078926] audit: type=1130 audit(1637136865.026:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.086222] vboxdrv: TSC mode is Invariant, tentative frequency 3693051930 Hz
[    4.086224] vboxdrv: Successfully loaded version 6.1.28 r147628 (interface 0x00320000)
[    4.089512] audit: type=1130 audit(1637136865.039:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.100014] VBoxNetAdp: Successfully started.
[    4.103221] VBoxNetFlt: Successfully started.
[    4.103532] audit: type=1130 audit(1637136865.053:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.103676] audit: type=1130 audit(1637136865.053:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.105548] BTRFS info (device nvme0n1p2): use zlib compression, level 3
[    4.105553] BTRFS info (device nvme0n1p2): disk space caching is enabled
[    4.106015] audit: type=1130 audit(1637136865.053:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.107459] audit: type=1130 audit(1637136865.056:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.108732] systemd-journald[324]: Received client request to flush runtime journal.
[    4.142235] audit: type=1130 audit(1637136865.089:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.151617] audit: type=1130 audit(1637136865.099:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.151998] audit: type=1334 audit(1637136865.099:10): prog-id=14 op=LOAD
[    4.205340] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    4.212787] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    4.213326] Linux agpgart interface v0.103
[    4.213837] ccp 0000:0c:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[    4.214136] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    4.214901] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20210604/utaddress-204)
[    4.214906] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.239694] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    4.239765] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    4.239771] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    4.259847] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    4.259849] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.261580] cryptd: max_cpu_qlen set to 1000
[    4.267147] AVX2 version of gcm_enc/dec engaged.
[    4.267171] AES CTR mode by8 optimization enabled
[    4.274171] snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client
[    4.274174] snd_hda_intel 0000:0a:00.1: Force to non-snoop mode
[    4.359995] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input3
[    4.360047] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input4
[    4.360084] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input5
[    4.360120] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input6
[    4.360159] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input7
[    4.364946] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.393031] kvm: disabled by bios
[    4.393766] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    4.393769] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.393770] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.393771] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.393771] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    4.393772] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.393772] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.393773] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.393774] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    4.450147] [drm] amdgpu kernel modesetting enabled.
[    4.450270] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input8
[    4.450306] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input9
[    4.450335] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input10
[    4.450365] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input11
[    4.450393] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input12
[    4.450418] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input13
[    4.450451] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input14
[    4.455778] amdgpu: Ignoring ACPI CRAT on non-APU system
[    4.455781] amdgpu: Virtual CRAT table created for CPU
[    4.455789] amdgpu: Topology: Add CPU node
[    4.455836] checking generic (d0000000 1fb0000) vs hw (d0000000 10000000)
[    4.455837] fb0: switching to amdgpudrmfb from VESA VGA
[    4.455895] Console: switching to colour dummy device 80x25
[    4.455915] amdgpu 0000:0a:00.0: vgaarb: deactivate vga console
[    4.455999] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1462:0x8A90 0xC7).
[    4.456002] amdgpu 0000:0a:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[    4.456009] [drm] register mmio base: 0xFCE00000
[    4.456010] [drm] register mmio size: 262144
[    4.456019] [drm] add ip block number 0 <vi_common>
[    4.456020] [drm] add ip block number 1 <gmc_v8_0>
[    4.456021] [drm] add ip block number 2 <tonga_ih>
[    4.456022] [drm] add ip block number 3 <gfx_v8_0>
[    4.456023] [drm] add ip block number 4 <sdma_v3_0>
[    4.456024] [drm] add ip block number 5 <powerplay>
[    4.456025] [drm] add ip block number 6 <dm>
[    4.456026] [drm] add ip block number 7 <uvd_v6_0>
[    4.456027] [drm] add ip block number 8 <vce_v3_0>
[    4.456287] amdgpu 0000:0a:00.0: No more image in the PCI ROM
[    4.456305] amdgpu 0000:0a:00.0: amdgpu: Fetched VBIOS from ROM BAR
[    4.456306] amdgpu: ATOM BIOS: 113-d09001-e02
[    4.456319] [drm] UVD is enabled in VM mode
[    4.456320] [drm] UVD ENC is enabled in VM mode
[    4.456322] [drm] VCE enabled in VM mode
[    4.456343] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    4.456911] amdgpu 0000:0a:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[    4.456914] amdgpu 0000:0a:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[    4.456919] [drm] Detected VRAM RAM=2048M, BAR=256M
[    4.456920] [drm] RAM width 128bits GDDR5
[    4.456942] [drm] amdgpu: 2048M of VRAM memory ready
[    4.456943] [drm] amdgpu: 3072M of GTT memory ready.
[    4.456945] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    4.459370] [drm] PCIE GART of 256M enabled (table at 0x000000F401FA4000).
[    4.460106] [drm] Chained IB support enabled!
[    4.462611] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[    4.463064] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    4.463969] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    4.509021] MCE: In-kernel MCE decoding enabled.
[    4.510060] kvm: disabled by bios
[    4.532675] random: dhcpcd: uninitialized urandom read (112 bytes read)
[    4.563298] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[    4.563322] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[    4.563337] [drm] Display Core initialized with v3.2.141!
[    4.572848] snd_hda_intel 0000:0a:00.1: bound 0000:0a:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    4.608535] usb 1-7: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    4.608539] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.608540] usb 1-7: Product: ITE Device
[    4.608542] usb 1-7: Manufacturer: ITE Tech. Inc.
[    4.672810] kvm: disabled by bios
[    4.676578] intel_rapl_common: Found RAPL domain package
[    4.676579] intel_rapl_common: Found RAPL domain core
[    4.677974] 8021q: 802.1Q VLAN Support v1.8
[    4.726254] [drm] UVD and UVD ENC initialized successfully.
[    4.802782] usb 1-9: new high-speed USB device number 4 using xhci_hcd
[    4.803926] kvm: disabled by bios
[    4.818677] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.819897] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.819918] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.819919] cfg80211: failed to load regulatory.db
[    4.827181] [drm] VCE initialized successfully.
[    4.828279] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    4.828360] amdgpu: SRAT table not found
[    4.828361] amdgpu: Virtual CRAT table created for GPU
[    4.828394] amdgpu: Topology: Add dGPU node [0x699f:0x1002]
[    4.828396] kfd kfd: amdgpu: added device 1002:699f
[    4.828418] amdgpu 0000:0a:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 5, active_cu_number 8
[    4.834265] [drm] fb mappable at 0xD24D4000
[    4.834267] [drm] vram apper at 0xD0000000
[    4.834268] [drm] size 33177600
[    4.834268] [drm] fb depth is 24
[    4.834269] [drm]    pitch is 15360
[    4.834312] fbcon: amdgpu (fb0) is primary device
[    4.963962] kvm: disabled by bios
[    5.021714] usb 1-9: New USB device found, idVendor=050d, idProduct=0234, bcdDevice= 0.00
[    5.021717] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.028720] hub 1-9:1.0: USB hub found
[    5.031691] hub 1-9:1.0: 4 ports detected
[    5.124444] kvm: disabled by bios
[    5.160271] Console: switching to colour frame buffer device 240x67
[    5.176971] amdgpu 0000:0a:00.0: [drm] fb0: amdgpu frame buffer device
[    5.198501] amdgpu 0000:0a:00.0: amdgpu: Using BACO for runtime pm
[    5.198687] [drm] Initialized amdgpu 3.42.0 20150101 for 0000:0a:00.0 on minor 0
[    5.242780] usb 1-10: new high-speed USB device number 5 using xhci_hcd
[    5.296334] kvm: disabled by bios
[    5.439325] kvm: disabled by bios
[    5.472658] usb 1-10: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    5.472661] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.472662] usb 1-10: Product: USB2.0 Hub
[    5.481676] hub 1-10:1.0: USB hub found
[    5.485658] hub 1-10:1.0: 4 ports detected
[    5.566105] usb 1-9.2: new low-speed USB device number 6 using xhci_hcd
[    5.590381] kvm: disabled by bios
[    5.591302] hid-generic 0003:048D:5702.0001: hiddev96,hidraw0: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:02:00.0-7/input0
[    5.591326] usbcore: registered new interface driver usbhid
[    5.591327] usbhid: USB HID core driver
[    5.591802] Intel(R) Wireless WiFi driver for Linux
[    5.608636] iwlwifi 0000:09:00.0: WRT: Overriding region id 0
[    5.608638] iwlwifi 0000:09:00.0: WRT: Overriding region id 1
[    5.608639] iwlwifi 0000:09:00.0: WRT: Overriding region id 2
[    5.608640] iwlwifi 0000:09:00.0: WRT: Overriding region id 3
[    5.608641] iwlwifi 0000:09:00.0: WRT: Overriding region id 4
[    5.608641] iwlwifi 0000:09:00.0: WRT: Overriding region id 6
[    5.608642] iwlwifi 0000:09:00.0: WRT: Overriding region id 8
[    5.608643] iwlwifi 0000:09:00.0: WRT: Overriding region id 9
[    5.608643] iwlwifi 0000:09:00.0: WRT: Overriding region id 10
[    5.608644] iwlwifi 0000:09:00.0: WRT: Overriding region id 11
[    5.608645] iwlwifi 0000:09:00.0: WRT: Overriding region id 15
[    5.608645] iwlwifi 0000:09:00.0: WRT: Overriding region id 16
[    5.608646] iwlwifi 0000:09:00.0: WRT: Overriding region id 18
[    5.608647] iwlwifi 0000:09:00.0: WRT: Overriding region id 19
[    5.608647] iwlwifi 0000:09:00.0: WRT: Overriding region id 20
[    5.608648] iwlwifi 0000:09:00.0: WRT: Overriding region id 21
[    5.608648] iwlwifi 0000:09:00.0: WRT: Overriding region id 28
[    5.608839] iwlwifi 0000:09:00.0: loaded firmware version 46.6b541b68.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
[    5.610557] libphy: r8169: probed
[    5.610714] r8169 0000:08:00.0 eth0: RTL8125B, 18:c0:4d:db:fe:78, XID 641, IRQ 110
[    5.610716] r8169 0000:08:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    5.611733] r8169 0000:08:00.0 eno1: renamed from eth0
[    5.676097] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-800:00: attached PHY driver (mii_bus:phy_addr=r8169-0-800:00, irq=MAC)
[    5.737126] kvm: disabled by bios
[    5.825639] usb 1-9.2: New USB device found, idVendor=046d, idProduct=c03e, bcdDevice=20.00
[    5.825642] usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.825643] usb 1-9.2: Product: USB-PS/2 Optical Mouse
[    5.825644] usb 1-9.2: Manufacturer: Logitech
[    5.858711] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C03E.0002/input/input15
[    5.858751] hid-generic 0003:046D:C03E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:02:00.0-9.2/input0
[    5.876263] r8169 0000:08:00.0 eno1: Link is Down
[    5.919430] random: crng init done
[    5.919431] random: 3 urandom warning(s) missed due to ratelimiting
[    5.922752] usb 1-10.1: new high-speed USB device number 7 using xhci_hcd
[    5.926366] kauditd_printk_skb: 21 callbacks suppressed
[    5.926368] audit: type=1130 audit(1637136866.876:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.932879] iwlwifi 0000:09:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x324
[    5.939851] thermal thermal_zone0: failed to read out thermal zone (-61)
[    5.980327] iwlwifi 0000:09:00.0: base HW address: bc:17:b8:b7:ae:da
[    6.047846] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    6.049852] iwlwifi 0000:09:00.0 wlp9s0: renamed from wlan0
[    6.052002] audit: type=1130 audit(1637136866.999:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.117466] audit: type=1130 audit(1637136867.066:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=syslog-ng@default comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.185619] usb 1-10.1: New USB device found, idVendor=0bda, idProduct=525d, bcdDevice=58.01
[    6.185622] usb 1-10.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    6.185623] usb 1-10.1: Product: HK 2M CAM
[    6.185624] usb 1-10.1: Manufacturer: WDH
[    6.185625] usb 1-10.1: SerialNumber: 202001010001
[    6.268693] ACPI: \: failed to evaluate _DSM (0x1001)
[    6.268696] ACPI: \: failed to evaluate _DSM (0x1001)
[    6.268698] ACPI: \: failed to evaluate _DSM (0x1001)
[    6.268698] ACPI: \: failed to evaluate _DSM (0x1001)
[    6.276074] usb 1-9.3: new low-speed USB device number 8 using xhci_hcd
[    6.541611] usb 1-9.3: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[    6.541616] usb 1-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.541618] usb 1-9.3: Product: USB Keyboard
[    6.541619] usb 1-9.3: Manufacturer: Logitech
[    6.609737] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:046D:C31C.0003/input/input16
[    6.666295] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:02:00.0-9.3/input0
[    6.679409] usb 1-10.2: new high-speed USB device number 9 using xhci_hcd
[    6.765861] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C31C.0004/input/input17
[    6.819601] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C31C.0004/input/input18
[    6.819783] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:02:00.0-9.3/input1
[    6.847877] mousedev: PS/2 mouse device common for all mice
[    6.854682] audit: type=1130 audit(1637136867.803:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=gpm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.361685] usb 1-10.2: New USB device found, idVendor=0bda, idProduct=0151, bcdDevice=51.95
[    7.361689] usb 1-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.361690] usb 1-10.2: Product: USB2.0-CRW
[    7.361692] usb 1-10.2: Manufacturer: Generic
[    7.361692] usb 1-10.2: SerialNumber: 20060413092100000
[    7.469485] usb 1-10.4: new high-speed USB device number 10 using xhci_hcd
[    7.608687] usb 1-10.4: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[    7.608692] usb 1-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.608694] usb 1-10.4: Product: Nexcopy Device  
[    7.608695] usb 1-10.4: Manufacturer: Generic 
[    7.608696] usb 1-10.4: SerialNumber: 032019-27618
[    7.648090] mc: Linux media interface: v0.10
[    7.648549] usb-storage 1-10.2:1.0: USB Mass Storage device detected
[    7.648615] scsi host6: usb-storage 1-10.2:1.0
[    7.648655] usb-storage 1-10.4:1.0: USB Mass Storage device detected
[    7.648689] usb-storage 1-10.4:1.0: Quirks match for vid 090c pid 1000: 400
[    7.648701] scsi host7: usb-storage 1-10.4:1.0
[    7.648729] usbcore: registered new interface driver usb-storage
[    7.649715] usbcore: registered new interface driver uas
[    7.653136] videodev: Linux video capture interface: v2.00
[    7.672540] usb 1-10.1: current rate 48000 is different from the runtime rate 8000
[    7.888645] usb 1-10.1: current rate 48000 is different from the runtime rate 16000
[    8.104634] usb 1-10.1: current rate 48000 is different from the runtime rate 44100
[    8.537623] usb 1-10.1: current rate 48000 is different from the runtime rate 8000
[    8.679714] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    8.685904] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    8.692110] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    8.698303] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    8.753503] usb 1-10.1: current rate 48000 is different from the runtime rate 16000
[    8.856094] scsi 7:0:0:0: Direct-Access     Generic  Mass Storage     1100 PQ: 0 ANSI: 6
[    8.857108] sd 7:0:0:0: [sda] 62914560 512-byte logical blocks: (32.2 GB/30.0 GiB)
[    8.857726] sd 7:0:0:0: [sda] Write Protect is off
[    8.857730] sd 7:0:0:0: [sda] Mode Sense: 43 00 00 00
[    8.859506] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.897233]  sda: sda1
[    8.901232] sd 7:0:0:0: [sda] Attached SCSI removable disk
[    8.969498] usb 1-10.1: current rate 48000 is different from the runtime rate 44100
[    9.285923] r8169 0000:08:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[    9.285937] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[    9.439546] usbcore: registered new interface driver snd-usb-audio
[    9.442489] usb 1-10.1: Found UVC 1.00 device HK 2M CAM (0bda:525d)
[    9.501624] input: HK 2M CAM: HK 2M CAM as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-10/1-10.1/1-10.1:1.0/input/input19
[    9.501685] usbcore: registered new interface driver uvcvideo
[    9.565677] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[    9.792018] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.002322] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.228931] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.452128] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.662106] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.872122] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.056701] audit: type=1131 audit(1637136872.006:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.081869] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.204995] sd 6:0:0:3: [sde] Attached SCSI removable disk
[   11.292101] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.508635] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.718658] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.928535] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.138626] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.263011] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   12.352096] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.475472] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[   12.562032] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.771858] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.981938] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.191794] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.401901] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.611892] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.822000] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.031876] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.242070] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.451864] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.505536] audit: type=1100 audit(1637136875.453:37): pid=514 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[   14.514374] audit: type=1101 audit(1637136875.463:38): pid=514 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[   14.514686] audit: type=1103 audit(1637136875.463:39): pid=514 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[   14.514725] audit: type=1006 audit(1637136875.463:40): pid=514 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   14.514731] audit: type=1300 audit(1637136875.463:40): arch=c000003e syscall=1 success=yes exit=4 a0=5 a1=7ffcf576b100 a2=4 a3=3e8 items=0 ppid=1 pid=514 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=1000 fsgid=0 tty=tty1 ses=1 comm="login" exe="/usr/bin/login" key=(null)
[   14.514733] audit: type=1327 audit(1637136875.463:40): proctitle=2F62696E2F6C6F67696E002D70002D2D
[   14.522240] audit: type=1130 audit(1637136875.470:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.524577] audit: type=1101 audit(1637136875.473:42): pid=701 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="cedric" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.524588] audit: type=1103 audit(1637136875.473:43): pid=701 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="cedric" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   14.668461] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.878651] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.088622] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.298637] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.508623] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.718622] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   15.928391] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.052850] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[   16.141846] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.358390] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.568358] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.778363] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.991699] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.993794] kauditd_printk_skb: 11 callbacks suppressed
[   16.993796] audit: type=1130 audit(1637136877.943:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.002322] audit: type=1130 audit(1637136877.950:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.638392] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.001673] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.214989] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.434973] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.648298] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.858298] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.068294] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.278311] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.488284] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.698315] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.908265] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.118258] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.328257] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.538247] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.748237] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.958235] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.168226] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.378241] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.588241] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.798395] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.008245] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.218249] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.428249] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.638208] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.854872] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.064859] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.284859] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.494853] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.708597] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.918391] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.135254] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.348268] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.564926] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.702874] audit: type=1334 audit(1637136885.653:53): prog-id=21 op=LOAD
[   24.702928] audit: type=1334 audit(1637136885.653:54): prog-id=22 op=LOAD
[   24.731107] audit: type=1130 audit(1637136885.680:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   24.774801] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.988194] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.218529] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.445188] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.668417] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.895177] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.956888] PM: suspend entry (deep)
[   25.981487] Filesystems sync: 0.024 seconds
[   25.981879] Freezing user space processes ... (elapsed 0.055 seconds) done.
[   26.037039] OOM killer disabled.
[   26.037040] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   26.038154] printk: Suspending console(s) (use no_console_suspend to debug)
[   26.052224] r8169 0000:08:00.0 eno1: Link is Down
[   26.078902] sd 7:0:0:0: [sda] Synchronizing SCSI cache
[   26.475981] ACPI: PM: Preparing to enter system sleep state S3
[   26.826125] ACPI: PM: Saving platform NVS memory
[   26.826191] Disabling non-boot CPUs ...
[   26.827108] IRQ 106: no longer affine to CPU1
[   26.828134] smpboot: CPU 1 is now offline
[   26.829734] IRQ 107: no longer affine to CPU2
[   26.830765] smpboot: CPU 2 is now offline
[   26.832197] IRQ 108: no longer affine to CPU3
[   26.833224] smpboot: CPU 3 is now offline
[   26.835584] smpboot: CPU 4 is now offline
[   26.837735] smpboot: CPU 5 is now offline
[   26.840101] smpboot: CPU 6 is now offline
[   26.840810] Spectre V2 : Update user space SMT mitigation: STIBP off
[   26.842282] smpboot: CPU 7 is now offline
[   26.844204] smpboot: CPU 8 is now offline
[   26.846080] smpboot: CPU 9 is now offline
[   26.848085] smpboot: CPU 10 is now offline
[   26.850058] smpboot: CPU 11 is now offline
[   26.850957] ACPI: PM: Low-level resume complete
[   26.850992] ACPI: PM: Restoring platform NVS memory
[   26.851159] LVT offset 0 assigned for vector 0x400
[   26.851565] Enabling non-boot CPUs ...
[   26.851613] x86: Booting SMP configuration:
[   26.851614] smpboot: Booting Node 0 Processor 1 APIC 0x2
[   26.851727] microcode: CPU1: patch_level=0x0a201009
[   26.854307] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[   26.856294] CPU1 is up
[   26.856311] smpboot: Booting Node 0 Processor 2 APIC 0x4
[   26.856443] microcode: CPU2: patch_level=0x0a201009
[   26.858658] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[   26.859625] CPU2 is up
[   26.859642] smpboot: Booting Node 0 Processor 3 APIC 0x6
[   26.859737] microcode: CPU3: patch_level=0x0a201009
[   26.861940] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[   26.862943] CPU3 is up
[   26.862956] smpboot: Booting Node 0 Processor 4 APIC 0x8
[   26.863066] microcode: CPU4: patch_level=0x0a201009
[   26.865275] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[   26.866296] CPU4 is up
[   26.866310] smpboot: Booting Node 0 Processor 5 APIC 0xa
[   26.866406] microcode: CPU5: patch_level=0x0a201009
[   26.868614] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[   26.869630] CPU5 is up
[   26.869677] smpboot: Booting Node 0 Processor 6 APIC 0x1
[   26.869771] microcode: CPU6: patch_level=0x0a201009
[   26.871983] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[   26.873059] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[   26.873075] CPU6 is up
[   26.873094] smpboot: Booting Node 0 Processor 7 APIC 0x3
[   26.873192] microcode: CPU7: patch_level=0x0a201009
[   26.875417] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[   26.876361] CPU7 is up
[   26.876385] smpboot: Booting Node 0 Processor 8 APIC 0x5
[   26.876497] microcode: CPU8: patch_level=0x0a201009
[   26.878703] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[   26.879731] CPU8 is up
[   26.879745] smpboot: Booting Node 0 Processor 9 APIC 0x7
[   26.879846] microcode: CPU9: patch_level=0x0a201009
[   26.882065] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[   26.883090] CPU9 is up
[   26.883120] smpboot: Booting Node 0 Processor 10 APIC 0x9
[   26.883278] microcode: CPU10: patch_level=0x0a201009
[   26.885502] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[   26.886476] CPU10 is up
[   26.886519] smpboot: Booting Node 0 Processor 11 APIC 0xb
[   26.886644] microcode: CPU11: patch_level=0x0a201009
[   26.888860] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[   26.889853] CPU11 is up
[   26.890659] ACPI: PM: Waking up from system sleep state S3
[   26.963681] usb usb1: root hub lost power or was reset
[   26.963683] usb usb2: root hub lost power or was reset
[   27.063068] nvme nvme0: Shutdown timeout set to 10 seconds
[   27.068431] nvme nvme0: 32/0/0 default/read/poll queues
[   27.086706] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000).
[   27.109587] r8169 0000:08:00.0 eno1: Link is Down
[   27.152881] ACPI: \: failed to evaluate _DSM (0x1001)
[   27.152884] ACPI: \: failed to evaluate _DSM (0x1001)
[   27.152885] ACPI: \: failed to evaluate _DSM (0x1001)
[   27.152885] ACPI: \: failed to evaluate _DSM (0x1001)
[   27.275869] ata3: SATA link down (SStatus 0 SControl 300)
[   27.276248] ata5: SATA link down (SStatus 0 SControl 330)
[   27.276359] ata1: SATA link down (SStatus 0 SControl 300)
[   27.276381] ata4: SATA link down (SStatus 0 SControl 300)
[   27.409776] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[   27.432868] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   27.449981] ata2.00: configured for UDMA/100
[   27.474266] [drm] UVD and UVD ENC initialized successfully.
[   27.575232] [drm] VCE initialized successfully.
[   27.813195] usb 1-9: reset high-speed USB device number 4 using xhci_hcd
[   27.996269] ata6: failed to resume link (SControl 0)
[   27.996282] ata6: SATA link down (SStatus 0 SControl 0)
[   28.209841] usb 1-7: reset full-speed USB device number 3 using xhci_hcd
[   28.686487] usb 1-10: reset high-speed USB device number 5 using xhci_hcd
[   29.193150] usb 1-9.2: reset low-speed USB device number 6 using xhci_hcd
[   29.859799] usb 1-9.3: reset low-speed USB device number 8 using xhci_hcd
[   30.051409] r8169 0000:08:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[   30.439762] usb 1-10.1: reset high-speed USB device number 7 using xhci_hcd
[   30.789638] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   31.589720] usb 1-10.4: reset high-speed USB device number 10 using xhci_hcd
[   31.720320] OOM killer enabled.
[   31.720321] Restarting tasks ... done.
[   31.722449] audit: type=1130 audit(1637136902.866:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   31.723292] PM: suspend exit
[   31.724689] audit: type=1130 audit(1637136902.870:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   31.724692] audit: type=1131 audit(1637136902.870:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   31.812026] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   32.022418] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   32.232422] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   32.452311] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   32.662396] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   32.885525] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   33.112376] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   33.519896] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   33.611934] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   35.875630] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   36.088762] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   36.302074] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   36.512068] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   36.722062] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   36.932041] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   38.011832] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   38.295446] audit: type=1100 audit(1637136909.440:59): pid=1168 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   38.295460] audit: type=1101 audit(1637136909.440:60): pid=1168 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   38.295602] audit: type=1103 audit(1637136909.440:61): pid=1168 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   38.295641] audit: type=1105 audit(1637136909.440:62): pid=1168 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   40.358751] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   40.995054] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   41.218689] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[root@cedric cedric]#

Now update the BIOS and try again to f14 and try again

cdwijs

Member

Registered: 2010-04-24

Posts: 289

Re: updated BIOS: system immediately resumes from suspend (Gigabyte B550)

Nope, kernel 5.14 with BIOS f14 fails, the system immediately resumes from a suspend. Here's the dmesg:

# dmesg 
[    0.000000] Linux version 5.14.16-arch1-1 (linux@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Tue, 02 Nov 2021 22:22:59 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8b90b3e6-d80e-445d-adf5-cc65a591b835 rw rootflags=subvol=root loglevel=3 quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 3376
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c3efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c3f000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20e000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000ba036fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba037000-0x00000000bca46fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bca47000-0x00000000bca8efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bca8f000-0x00000000bd170fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd171000-0x00000000bddfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000083f380000-0x000000083fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 AORUS PRO AC/B550 AORUS PRO AC, BIOS F14e 10/14/2021
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3692.908 MHz processor
[    0.000299] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000300] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000304] last_pfn = 0x83f380 max_arch_pfn = 0x400000000
[    0.001216] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001469] total RAM covered: 3071M
[    0.001571] Found optimal setting for mtrr clean up
[    0.001571]  gran_size: 64K 	chunk_size: 64M 	num_reg: 3  	lose cover RAM: 0G
[    0.001662] e820: update [mem 0xbcc00000-0xbcc0ffff] usable ==> reserved
[    0.001666] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.001669] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.004220] Using GB pages for direct mapping
[    0.004630] RAMDISK: [mem 0x36ff7000-0x377f2fff]
[    0.004633] ACPI: Early table checksum verification disabled
[    0.004636] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.004639] ACPI: XSDT 0x00000000BD159728 0000DC (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004643] ACPI: FACP 0x00000000BCA76000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.004646] ACPI: DSDT 0x00000000BCA53000 0067B6 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.004647] ACPI: FACS 0x00000000BD154000 000040
[    0.004649] ACPI: SSDT 0x00000000BCA85000 009A38 (v02 GBT    GSWApp   00000001 INTL 20190509)
[    0.004650] ACPI: SSDT 0x00000000BCA7C000 008C98 (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.004652] ACPI: SSDT 0x00000000BCA78000 003D06 (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.004653] ACPI: SSDT 0x00000000BCA77000 0001AD (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.004654] ACPI: FIDT 0x00000000BCA6F000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004656] ACPI: MCFG 0x00000000BCA6E000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.004657] ACPI: HPET 0x00000000BCA6D000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.004659] ACPI: IVRS 0x00000000BCA6C000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.004660] ACPI: TPM2 0x00000000BCA6A000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.004661] ACPI: PCCT 0x00000000BCA69000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.004663] ACPI: SSDT 0x00000000BCA66000 002FDD (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.004664] ACPI: CRAT 0x00000000BCA65000 000B18 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.004665] ACPI: CDIT 0x00000000BCA64000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.004667] ACPI: SSDT 0x00000000BCA63000 000625 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.004668] ACPI: SSDT 0x00000000BCA61000 0014FD (v01 AMD    ArticTPX 00000001 INTL 20190509)
[    0.004670] ACPI: SSDT 0x00000000BCA60000 000788 (v01 AMD    ArticNOI 00000001 INTL 20190509)
[    0.004671] ACPI: SSDT 0x00000000BCA5C000 003A59 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.004672] ACPI: APIC 0x00000000BCA5A000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.004674] ACPI: SSDT 0x00000000BCA74000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.004675] ACPI: SSDT 0x00000000BCA73000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.004676] ACPI: FPDT 0x00000000BCA72000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.004678] ACPI: WSMT 0x00000000BCA71000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004679] ACPI: Reserving FACP table memory at [mem 0xbca76000-0xbca76113]
[    0.004680] ACPI: Reserving DSDT table memory at [mem 0xbca53000-0xbca597b5]
[    0.004680] ACPI: Reserving FACS table memory at [mem 0xbd154000-0xbd15403f]
[    0.004681] ACPI: Reserving SSDT table memory at [mem 0xbca85000-0xbca8ea37]
[    0.004681] ACPI: Reserving SSDT table memory at [mem 0xbca7c000-0xbca84c97]
[    0.004681] ACPI: Reserving SSDT table memory at [mem 0xbca78000-0xbca7bd05]
[    0.004682] ACPI: Reserving SSDT table memory at [mem 0xbca77000-0xbca771ac]
[    0.004682] ACPI: Reserving FIDT table memory at [mem 0xbca6f000-0xbca6f09b]
[    0.004683] ACPI: Reserving MCFG table memory at [mem 0xbca6e000-0xbca6e03b]
[    0.004683] ACPI: Reserving HPET table memory at [mem 0xbca6d000-0xbca6d037]
[    0.004684] ACPI: Reserving IVRS table memory at [mem 0xbca6c000-0xbca6c0cf]
[    0.004684] ACPI: Reserving TPM2 table memory at [mem 0xbca6a000-0xbca6a04b]
[    0.004684] ACPI: Reserving PCCT table memory at [mem 0xbca69000-0xbca6906d]
[    0.004685] ACPI: Reserving SSDT table memory at [mem 0xbca66000-0xbca68fdc]
[    0.004685] ACPI: Reserving CRAT table memory at [mem 0xbca65000-0xbca65b17]
[    0.004686] ACPI: Reserving CDIT table memory at [mem 0xbca64000-0xbca64028]
[    0.004686] ACPI: Reserving SSDT table memory at [mem 0xbca63000-0xbca63624]
[    0.004687] ACPI: Reserving SSDT table memory at [mem 0xbca61000-0xbca624fc]
[    0.004687] ACPI: Reserving SSDT table memory at [mem 0xbca60000-0xbca60787]
[    0.004687] ACPI: Reserving SSDT table memory at [mem 0xbca5c000-0xbca5fa58]
[    0.004688] ACPI: Reserving APIC table memory at [mem 0xbca5a000-0xbca5a15d]
[    0.004688] ACPI: Reserving SSDT table memory at [mem 0xbca74000-0xbca7547e]
[    0.004689] ACPI: Reserving SSDT table memory at [mem 0xbca73000-0xbca730be]
[    0.004689] ACPI: Reserving FPDT table memory at [mem 0xbca72000-0xbca72043]
[    0.004690] ACPI: Reserving WSMT table memory at [mem 0xbca71000-0xbca71027]
[    0.004734] No NUMA configuration found
[    0.004735] Faking a node at [mem 0x0000000000000000-0x000000083f37ffff]
[    0.004737] NODE_DATA(0) allocated [mem 0x83f37c000-0x83f37ffff]
[    0.004763] Zone ranges:
[    0.004763]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.004764]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.004765]   Normal   [mem 0x0000000100000000-0x000000083f37ffff]
[    0.004766]   Device   empty
[    0.004766] Movable zone start for each node
[    0.004767] Early memory node ranges
[    0.004767]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.004768]   node   0: [mem 0x0000000000100000-0x0000000009c3efff]
[    0.004768]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.004769]   node   0: [mem 0x000000000a20e000-0x000000000affffff]
[    0.004769]   node   0: [mem 0x000000000b020000-0x00000000ba036fff]
[    0.004770]   node   0: [mem 0x00000000bddff000-0x00000000beffffff]
[    0.004770]   node   0: [mem 0x0000000100000000-0x000000083f37ffff]
[    0.004772] Initmem setup node 0 [mem 0x0000000000001000-0x000000083f37ffff]
[    0.004774] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.004784] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.004869] On node 0, zone DMA32: 961 pages in unavailable ranges
[    0.004878] On node 0, zone DMA32: 14 pages in unavailable ranges
[    0.007052] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.007150] On node 0, zone DMA32: 15816 pages in unavailable ranges
[    0.042383] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.042401] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.042794] ACPI: PM-Timer IO Port: 0x808
[    0.042800] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.042811] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.042816] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.042818] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.042819] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.042821] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.042822] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.042826] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[    0.042842] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.042843] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.042844] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.042844] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.042844] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.042845] PM: hibernation: Registered nosave memory: [mem 0x09c3f000-0x09ffffff]
[    0.042846] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20dfff]
[    0.042847] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.042848] PM: hibernation: Registered nosave memory: [mem 0xba037000-0xbca46fff]
[    0.042848] PM: hibernation: Registered nosave memory: [mem 0xbca47000-0xbca8efff]
[    0.042848] PM: hibernation: Registered nosave memory: [mem 0xbca8f000-0xbd170fff]
[    0.042849] PM: hibernation: Registered nosave memory: [mem 0xbd171000-0xbddfefff]
[    0.042850] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.042850] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.042850] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.042851] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
[    0.042851] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[    0.042851] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff]
[    0.042852] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd7fffff]
[    0.042852] PM: hibernation: Registered nosave memory: [mem 0xfd800000-0xfe9fffff]
[    0.042852] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.042853] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.042853] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.042853] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.042854] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.042854] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.042855] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.042855] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.042855] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.042856] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.042856] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.042856] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.042857] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.042857] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.042857] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.042858] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.042858] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.042858] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.042859] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.042860] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.042861] Booting paravirtualized kernel on bare hardware
[    0.042863] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.045246] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1
[    0.046188] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
[    0.046193] pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
[    0.046195] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.046200] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
[    0.046222] Built 1 zonelists, mobility grouping on.  Total pages: 8233537
[    0.046223] Policy zone: Normal
[    0.046224] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8b90b3e6-d80e-445d-adf5-cc65a591b835 rw rootflags=subvol=root loglevel=3 quiet
[    0.046257] Unknown command line parameters: BOOT_IMAGE=/vmlinuz-linux
[    0.046260] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.046260] printk: log_buf_len total cpu_extra contributions: 126976 bytes
[    0.046261] printk: log_buf_len min size: 131072 bytes
[    0.046387] printk: log_buf_len: 262144 bytes
[    0.046388] printk: early log buf free: 116240(88%)
[    0.048360] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.049347] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.049525] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[    0.096352] Memory: 32759176K/33457556K available (14344K kernel code, 2064K rwdata, 9356K rodata, 1804K init, 4076K bss, 698120K reserved, 0K cma-reserved)
[    0.096358] random: get_random_u64 called from __kmem_cache_create+0x2a/0x530 with crng_init=0
[    0.096436] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.096444] ftrace: allocating 42552 entries in 167 pages
[    0.106181] ftrace: allocated 167 pages with 5 groups
[    0.106269] rcu: Preemptible hierarchical RCU implementation.
[    0.106270] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.106271] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
[    0.106271] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.106272] 	Trampoline variant of Tasks RCU enabled.
[    0.106272] 	Rude variant of Tasks RCU enabled.
[    0.106273] 	Tracing variant of Tasks RCU enabled.
[    0.106273] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.106273] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.108164] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
[    0.108386] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.108484] spurious 8259A interrupt: IRQ7.
[    0.108492] Console: colour dummy device 80x25
[    0.108499] printk: console [tty0] enabled
[    0.108515] ACPI: Core revision 20210604
[    0.108616] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.108631] APIC: Switch to symmetric I/O mode setup
[    0.428722] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.428734] Switched APIC routing to physical flat.
[    0.429356] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.445311] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6a765746005, max_idle_ns: 881591150677 ns
[    0.445315] Calibrating delay loop (skipped), value calculated using timer frequency.. 7388.55 BogoMIPS (lpj=12309693)
[    0.445316] pid_max: default: 32768 minimum: 301
[    0.445330] LSM: Security Framework initializing
[    0.445334] landlock: Up and running.
[    0.445335] Yama: becoming mindful.
[    0.445338] LSM support for eBPF active
[    0.445374] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.445411] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.445542] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.445585] LVT offset 1 assigned for vector 0xf9
[    0.445739] LVT offset 2 assigned for vector 0xf4
[    0.445781] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[    0.445781] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.445783] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.445784] Spectre V2 : Mitigation: Full AMD retpoline
[    0.445785] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.445785] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.445786] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.445787] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.445787] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.447420] Freeing SMP alternatives memory: 36K
[    0.557629] smpboot: CPU0: AMD Ryzen 5 5600X 6-Core Processor (family: 0x19, model: 0x21, stepping: 0x0)
[    0.557719] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.557722] ... version:                0
[    0.557722] ... bit width:              48
[    0.557723] ... generic registers:      6
[    0.557723] ... value mask:             0000ffffffffffff
[    0.557723] ... max period:             00007fffffffffff
[    0.557724] ... fixed-purpose events:   0
[    0.557724] ... event mask:             000000000000003f
[    0.557757] rcu: Hierarchical SRCU implementation.
[    0.557981] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.558109] smp: Bringing up secondary CPUs ...
[    0.558163] x86: Booting SMP configuration:
[    0.558163] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6
[    0.568695] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.568727]   #7  #8  #9 #10 #11
[    0.580798] smp: Brought up 1 node, 12 CPUs
[    0.580798] smpboot: Max logical packages: 3
[    0.580798] smpboot: Total of 12 processors activated (88665.69 BogoMIPS)
[    0.582284] devtmpfs: initialized
[    0.582284] x86/mm: Memory block size: 128MB
[    0.582764] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20dfff] (57344 bytes)
[    0.582764] ACPI: PM: Registering ACPI NVS region [mem 0xbca8f000-0xbd170fff] (7217152 bytes)
[    0.582764] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.582764] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.582764] pinctrl core: initialized pinctrl subsystem
[    0.582764] PM: RTC time: 08:27:01, date: 2021-11-17
[    0.582764] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.582764] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.582764] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.582795] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.582799] audit: initializing netlink subsys (disabled)
[    0.582804] audit: type=2000 audit(1637137620.156:1): state=initialized audit_enabled=0 res=1
[    0.582804] thermal_sys: Registered thermal governor 'fair_share'
[    0.582804] thermal_sys: Registered thermal governor 'bang_bang'
[    0.582804] thermal_sys: Registered thermal governor 'step_wise'
[    0.582804] thermal_sys: Registered thermal governor 'user_space'
[    0.582804] thermal_sys: Registered thermal governor 'power_allocator'
[    0.582804] cpuidle: using governor ladder
[    0.582804] cpuidle: using governor menu
[    0.582804] Detected 1 PCC Subspaces
[    0.582804] Registering PCC driver as Mailbox controller
[    0.582804] HugeTLB: can free 4094 vmemmap pages for hugepages-1048576kB
[    0.582804] ACPI: bus type PCI registered
[    0.582804] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.582804] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.582804] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.582804] PCI: Using configuration type 1 for base access
[    0.582804] Kprobes globally optimized
[    0.585326] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[    0.585326] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.585326] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.585358] ACPI: Added _OSI(Module Device)
[    0.585359] ACPI: Added _OSI(Processor Device)
[    0.585359] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.585360] ACPI: Added _OSI(Processor Aggregator Device)
[    0.585360] ACPI: Added _OSI(Linux-Dell-Video)
[    0.585361] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.585361] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.595734] ACPI: 12 ACPI AML tables successfully acquired and loaded
[    0.596680] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.603886] ACPI: Interpreter enabled
[    0.603896] ACPI: PM: (supports S0 S3 S4 S5)
[    0.603896] ACPI: Using IOAPIC for interrupt routing
[    0.604089] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.604370] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.609700] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.609704] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.609848] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.609854] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.610076] PCI host bridge to bus 0000:00
[    0.610076] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.610077] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.610078] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.610079] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.610079] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.610080] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.610080] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.610081] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.610081] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.610091] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[    0.610179] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
[    0.610271] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[    0.610339] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
[    0.610412] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.610514] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
[    0.610541] pci 0000:00:01.2: enabling Extended Tags
[    0.610588] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.610684] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[    0.610752] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[    0.610817] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[    0.610888] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.611248] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[    0.611315] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[    0.611383] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[    0.611448] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[    0.611472] pci 0000:00:07.1: enabling Extended Tags
[    0.611511] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.611599] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[    0.611664] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[    0.611689] pci 0000:00:08.1: enabling Extended Tags
[    0.611733] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.611836] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.611947] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.612066] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[    0.612103] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[    0.612140] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[    0.612179] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[    0.612216] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[    0.612253] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[    0.612290] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[    0.612327] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[    0.612417] pci 0000:01:00.0: [144d:a80a] type 00 class 0x010802
[    0.612434] pci 0000:01:00.0: reg 0x10: [mem 0xfcea0000-0xfcea3fff 64bit]
[    0.612622] pci 0000:00:01.1: PCI bridge to [bus 01-04]
[    0.612625] pci 0000:00:01.1:   bridge window [io  0xf000-0xffff]
[    0.612627] pci 0000:00:01.1:   bridge window [mem 0xfcd00000-0xfcefffff]
[    0.612680] pci 0000:05:00.0: [1022:43ee] type 00 class 0x0c0330
[    0.612698] pci 0000:05:00.0: reg 0x10: [mem 0xfcca0000-0xfcca7fff 64bit]
[    0.612742] pci 0000:05:00.0: enabling Extended Tags
[    0.612799] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.612885] pci 0000:05:00.1: [1022:43eb] type 00 class 0x010601
[    0.612936] pci 0000:05:00.1: reg 0x24: [mem 0xfcc80000-0xfcc9ffff]
[    0.612944] pci 0000:05:00.1: reg 0x30: [mem 0xfcc00000-0xfcc7ffff pref]
[    0.612951] pci 0000:05:00.1: enabling Extended Tags
[    0.612996] pci 0000:05:00.1: PME# supported from D3hot D3cold
[    0.613060] pci 0000:05:00.2: [1022:43e9] type 01 class 0x060400
[    0.613108] pci 0000:05:00.2: enabling Extended Tags
[    0.613158] pci 0000:05:00.2: PME# supported from D3hot D3cold
[    0.613221] pci 0000:00:01.2: PCI bridge to [bus 05-08]
[    0.613224] pci 0000:00:01.2:   bridge window [io  0xe000-0xefff]
[    0.613226] pci 0000:00:01.2:   bridge window [mem 0xfca00000-0xfccfffff]
[    0.613320] pci 0000:06:08.0: [1022:43ea] type 01 class 0x060400
[    0.613370] pci 0000:06:08.0: enabling Extended Tags
[    0.613426] pci 0000:06:08.0: PME# supported from D3hot D3cold
[    0.613513] pci 0000:06:09.0: [1022:43ea] type 01 class 0x060400
[    0.613563] pci 0000:06:09.0: enabling Extended Tags
[    0.613619] pci 0000:06:09.0: PME# supported from D3hot D3cold
[    0.613709] pci 0000:05:00.2: PCI bridge to [bus 06-08]
[    0.613714] pci 0000:05:00.2:   bridge window [io  0xe000-0xefff]
[    0.613717] pci 0000:05:00.2:   bridge window [mem 0xfca00000-0xfcbfffff]
[    0.613811] pci 0000:07:00.0: [10ec:8125] type 00 class 0x020000
[    0.613836] pci 0000:07:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.613870] pci 0000:07:00.0: reg 0x18: [mem 0xfcb00000-0xfcb0ffff 64bit]
[    0.613892] pci 0000:07:00.0: reg 0x20: [mem 0xfcb10000-0xfcb13fff 64bit]
[    0.614046] pci 0000:07:00.0: supports D1 D2
[    0.614047] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.614226] pci 0000:06:08.0: PCI bridge to [bus 07]
[    0.614231] pci 0000:06:08.0:   bridge window [io  0xe000-0xefff]
[    0.614233] pci 0000:06:08.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.614306] pci 0000:08:00.0: [8086:2526] type 00 class 0x028000
[    0.614341] pci 0000:08:00.0: reg 0x10: [mem 0xfca00000-0xfca03fff 64bit]
[    0.614529] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    0.614654] pci 0000:06:09.0: PCI bridge to [bus 08]
[    0.614661] pci 0000:06:09.0:   bridge window [mem 0xfca00000-0xfcafffff]
[    0.614737] pci 0000:09:00.0: [1002:699f] type 00 class 0x030000
[    0.614754] pci 0000:09:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.614765] pci 0000:09:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.614772] pci 0000:09:00.0: reg 0x20: [io  0xd000-0xd0ff]
[    0.614779] pci 0000:09:00.0: reg 0x24: [mem 0xfcf00000-0xfcf3ffff]
[    0.614787] pci 0000:09:00.0: reg 0x30: [mem 0xfcf40000-0xfcf5ffff pref]
[    0.614873] pci 0000:09:00.0: supports D1 D2
[    0.614873] pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.614987] pci 0000:09:00.1: [1002:aae0] type 00 class 0x040300
[    0.615004] pci 0000:09:00.1: reg 0x10: [mem 0xfcf60000-0xfcf63fff 64bit]
[    0.615097] pci 0000:09:00.1: supports D1 D2
[    0.615180] pci 0000:00:03.1: PCI bridge to [bus 09]
[    0.615183] pci 0000:00:03.1:   bridge window [io  0xd000-0xdfff]
[    0.615184] pci 0000:00:03.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.615187] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.615224] pci 0000:0a:00.0: [1022:148a] type 00 class 0x130000
[    0.615261] pci 0000:0a:00.0: enabling Extended Tags
[    0.615369] pci 0000:00:07.1: PCI bridge to [bus 0a]
[    0.615421] pci 0000:0b:00.0: [1022:1485] type 00 class 0x130000
[    0.615465] pci 0000:0b:00.0: enabling Extended Tags
[    0.615577] pci 0000:0b:00.1: [1022:1486] type 00 class 0x108000
[    0.615597] pci 0000:0b:00.1: reg 0x18: [mem 0xfc800000-0xfc8fffff]
[    0.615613] pci 0000:0b:00.1: reg 0x24: [mem 0xfc908000-0xfc909fff]
[    0.615623] pci 0000:0b:00.1: enabling Extended Tags
[    0.615719] pci 0000:0b:00.3: [1022:149c] type 00 class 0x0c0330
[    0.615732] pci 0000:0b:00.3: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit]
[    0.615763] pci 0000:0b:00.3: enabling Extended Tags
[    0.615808] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
[    0.615876] pci 0000:0b:00.4: [1022:1487] type 00 class 0x040300
[    0.615886] pci 0000:0b:00.4: reg 0x10: [mem 0xfc900000-0xfc907fff]
[    0.615921] pci 0000:0b:00.4: enabling Extended Tags
[    0.615964] pci 0000:0b:00.4: PME# supported from D0 D3hot D3cold
[    0.616036] pci 0000:00:08.1: PCI bridge to [bus 0b]
[    0.616040] pci 0000:00:08.1:   bridge window [mem 0xfc700000-0xfc9fffff]
[    0.616221] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.616257] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.616288] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.616325] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.616359] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.616386] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.616414] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.616441] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.616930] iommu: Default domain type: Translated 
[    0.616961] pci 0000:09:00.0: vgaarb: setting as boot VGA device
[    0.616961] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.616961] pci 0000:09:00.0: vgaarb: bridge control possible
[    0.616961] vgaarb: loaded
[    0.616961] SCSI subsystem initialized
[    0.616961] libata version 3.00 loaded.
[    0.616961] ACPI: bus type USB registered
[    0.616961] usbcore: registered new interface driver usbfs
[    0.616961] usbcore: registered new interface driver hub
[    0.616961] usbcore: registered new device driver usb
[    0.616961] pps_core: LinuxPPS API ver. 1 registered
[    0.616961] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.616961] PTP clock support registered
[    0.616961] EDAC MC: Ver: 3.0.0
[    0.616961] NetLabel: Initializing
[    0.616961] NetLabel:  domain hash size = 128
[    0.616961] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.616961] NetLabel:  unlabeled traffic allowed by default
[    0.616961] PCI: Using ACPI for IRQ routing
[    0.621297] PCI: pci_cache_line_size set to 64 bytes
[    0.621358] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.621359] e820: reserve RAM buffer [mem 0x09c3f000-0x0bffffff]
[    0.621359] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.621360] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.621360] e820: reserve RAM buffer [mem 0xba037000-0xbbffffff]
[    0.621361] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.621361] e820: reserve RAM buffer [mem 0x83f380000-0x83fffffff]
[    0.621365] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.621365] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.623185] clocksource: Switched to clocksource tsc-early
[    0.626251] VFS: Disk quotas dquot_6.6.0
[    0.626261] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.626298] pnp: PnP ACPI init
[    0.626350] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.626387] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
[    0.626506] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.626507] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.626507] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.626508] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.626645] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.626646] system 00:04: [io  0x040b] has been reserved
[    0.626647] system 00:04: [io  0x04d6] has been reserved
[    0.626647] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.626648] system 00:04: [io  0x0c14] has been reserved
[    0.626649] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.626649] system 00:04: [io  0x0c52] has been reserved
[    0.626650] system 00:04: [io  0x0c6c] has been reserved
[    0.626650] system 00:04: [io  0x0c6f] has been reserved
[    0.626651] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.626651] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.626652] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.626652] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.626653] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.626654] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.626654] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.626655] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.626656] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.626657] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.626658] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.626659] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.626660] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.627039] pnp: PnP ACPI: found 5 devices
[    0.632192] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.632226] NET: Registered PF_INET protocol family
[    0.632371] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.633183] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.633340] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.633514] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.633564] TCP: Hash tables configured (established 262144 bind 65536)
[    0.633669] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.633742] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.633808] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.633868] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.633871] NET: Registered PF_XDP protocol family
[    0.633878] pci 0000:00:01.1: PCI bridge to [bus 01-04]
[    0.633880] pci 0000:00:01.1:   bridge window [io  0xf000-0xffff]
[    0.633883] pci 0000:00:01.1:   bridge window [mem 0xfcd00000-0xfcefffff]
[    0.633887] pci 0000:06:08.0: PCI bridge to [bus 07]
[    0.633889] pci 0000:06:08.0:   bridge window [io  0xe000-0xefff]
[    0.633893] pci 0000:06:08.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.633900] pci 0000:06:09.0: PCI bridge to [bus 08]
[    0.633904] pci 0000:06:09.0:   bridge window [mem 0xfca00000-0xfcafffff]
[    0.633911] pci 0000:05:00.2: PCI bridge to [bus 06-08]
[    0.633913] pci 0000:05:00.2:   bridge window [io  0xe000-0xefff]
[    0.633916] pci 0000:05:00.2:   bridge window [mem 0xfca00000-0xfcbfffff]
[    0.633923] pci 0000:00:01.2: PCI bridge to [bus 05-08]
[    0.633924] pci 0000:00:01.2:   bridge window [io  0xe000-0xefff]
[    0.633927] pci 0000:00:01.2:   bridge window [mem 0xfca00000-0xfccfffff]
[    0.633931] pci 0000:00:03.1: PCI bridge to [bus 09]
[    0.633932] pci 0000:00:03.1:   bridge window [io  0xd000-0xdfff]
[    0.633934] pci 0000:00:03.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.633936] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.633939] pci 0000:00:07.1: PCI bridge to [bus 0a]
[    0.633945] pci 0000:00:08.1: PCI bridge to [bus 0b]
[    0.633947] pci 0000:00:08.1:   bridge window [mem 0xfc700000-0xfc9fffff]
[    0.633952] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.633952] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.633953] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.633954] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.633954] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.633955] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.633955] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfec2ffff window]
[    0.633956] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.633956] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.633957] pci_bus 0000:01: resource 1 [mem 0xfcd00000-0xfcefffff]
[    0.633958] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.633958] pci_bus 0000:05: resource 1 [mem 0xfca00000-0xfccfffff]
[    0.633959] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
[    0.633959] pci_bus 0000:06: resource 1 [mem 0xfca00000-0xfcbfffff]
[    0.633960] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
[    0.633960] pci_bus 0000:07: resource 1 [mem 0xfcb00000-0xfcbfffff]
[    0.633961] pci_bus 0000:08: resource 1 [mem 0xfca00000-0xfcafffff]
[    0.633961] pci_bus 0000:09: resource 0 [io  0xd000-0xdfff]
[    0.633962] pci_bus 0000:09: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.633962] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.633963] pci_bus 0000:0b: resource 1 [mem 0xfc700000-0xfc9fffff]
[    0.634098] pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.634108] pci 0000:09:00.1: D0 power state depends on 0000:09:00.0
[    0.634230] PCI: CLS 64 bytes, default 64
[    0.634235] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.634243] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.634254] pci 0000:00:01.0: Adding to iommu group 0
[    0.634259] pci 0000:00:01.1: Adding to iommu group 1
[    0.634264] pci 0000:00:01.2: Adding to iommu group 2
[    0.634269] pci 0000:00:02.0: Adding to iommu group 3
[    0.634270] Trying to unpack rootfs image as initramfs...
[    0.634274] pci 0000:00:03.0: Adding to iommu group 4
[    0.634279] pci 0000:00:03.1: Adding to iommu group 5
[    0.634284] pci 0000:00:04.0: Adding to iommu group 6
[    0.634289] pci 0000:00:05.0: Adding to iommu group 7
[    0.634294] pci 0000:00:07.0: Adding to iommu group 8
[    0.634299] pci 0000:00:07.1: Adding to iommu group 9
[    0.634305] pci 0000:00:08.0: Adding to iommu group 10
[    0.634310] pci 0000:00:08.1: Adding to iommu group 11
[    0.634317] pci 0000:00:14.0: Adding to iommu group 12
[    0.634320] pci 0000:00:14.3: Adding to iommu group 12
[    0.634334] pci 0000:00:18.0: Adding to iommu group 13
[    0.634338] pci 0000:00:18.1: Adding to iommu group 13
[    0.634341] pci 0000:00:18.2: Adding to iommu group 13
[    0.634345] pci 0000:00:18.3: Adding to iommu group 13
[    0.634348] pci 0000:00:18.4: Adding to iommu group 13
[    0.634352] pci 0000:00:18.5: Adding to iommu group 13
[    0.634356] pci 0000:00:18.6: Adding to iommu group 13
[    0.634360] pci 0000:00:18.7: Adding to iommu group 13
[    0.634366] pci 0000:01:00.0: Adding to iommu group 14
[    0.634375] pci 0000:05:00.0: Adding to iommu group 15
[    0.634380] pci 0000:05:00.1: Adding to iommu group 15
[    0.634385] pci 0000:05:00.2: Adding to iommu group 15
[    0.634387] pci 0000:06:08.0: Adding to iommu group 15
[    0.634388] pci 0000:06:09.0: Adding to iommu group 15
[    0.634391] pci 0000:07:00.0: Adding to iommu group 15
[    0.634393] pci 0000:08:00.0: Adding to iommu group 15
[    0.634412] pci 0000:09:00.0: Adding to iommu group 16
[    0.634419] pci 0000:09:00.1: Adding to iommu group 16
[    0.634423] pci 0000:0a:00.0: Adding to iommu group 17
[    0.634431] pci 0000:0b:00.0: Adding to iommu group 18
[    0.634438] pci 0000:0b:00.1: Adding to iommu group 19
[    0.634444] pci 0000:0b:00.3: Adding to iommu group 20
[    0.634450] pci 0000:0b:00.4: Adding to iommu group 21
[    0.637325] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.637327] AMD-Vi: Extended features (0x58f77ef22294a5a): PPR NX GT IA PC GA_vAPIC
[    0.637330] AMD-Vi: Interrupt remapping enabled
[    0.637417] amd_uncore: 4  amd_df counters detected
[    0.637421] amd_uncore: 6  amd_l3 counters detected
[    0.637581] LVT offset 0 assigned for vector 0x400
[    0.637629] perf: AMD IBS detected (0x000003ff)
[    0.637633] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.638375] Initialise system trusted keyrings
[    0.638381] Key type blacklist registered
[    0.638398] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.638858] zbud: loaded
[    0.641382] Key type asymmetric registered
[    0.641383] Asymmetric key parser 'x509' registered
[    0.641387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.641409] io scheduler mq-deadline registered
[    0.641410] io scheduler kyber registered
[    0.641428] io scheduler bfq registered
[    0.641578] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[    0.641614] pcieport 0000:00:01.1: AER: enabled with IRQ 26
[    0.641710] pcieport 0000:00:01.2: PME: Signaling with IRQ 27
[    0.641745] pcieport 0000:00:01.2: AER: enabled with IRQ 27
[    0.641840] pcieport 0000:00:03.1: PME: Signaling with IRQ 28
[    0.641869] pcieport 0000:00:03.1: AER: enabled with IRQ 28
[    0.641998] pcieport 0000:00:07.1: PME: Signaling with IRQ 30
[    0.642032] pcieport 0000:00:07.1: AER: enabled with IRQ 30
[    0.642115] pcieport 0000:00:08.1: PME: Signaling with IRQ 31
[    0.642150] pcieport 0000:00:08.1: AER: enabled with IRQ 31
[    0.642542] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.642554] vesafb: mode is 3840x2160x32, linelength=15360, pages=0
[    0.642554] vesafb: scrolling: redraw
[    0.642555] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.642561] vesafb: framebuffer at 0xd0000000, mapped to 0x0000000020ae3bac, using 32448k, total 32448k
[    0.642581] fbcon: Deferring console take-over
[    0.642581] fb0: VESA VGA frame buffer device
[    0.642650] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.642663] ACPI: button: Power Button [PWRB]
[    0.642678] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.644521] ACPI: button: Power Button [PWRF]
[    0.647857] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1155
[    0.647870] Monitor-Mwait will be used to enter C-1 state
[    0.647874] ACPI: \_SB_.PLTF.C000: Found 2 idle states
[    0.651158] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[    0.651229] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[    0.651289] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[    0.651337] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[    0.651382] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[    0.651439] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[    0.651501] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[    0.651556] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[    0.651614] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[    0.651673] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[    0.651732] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[    0.651834] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.652390] Non-volatile memory driver v1.3
[    0.652391] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.652808] nvme nvme0: pci function 0000:01:00.0
[    0.652826] ahci 0000:05:00.1: version 3.0
[    0.652962] ahci 0000:05:00.1: SSS flag set, parallel bus scan disabled
[    0.653019] ahci 0000:05:00.1: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.653020] ahci 0000:05:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.653258] scsi host0: ahci
[    0.653311] scsi host1: ahci
[    0.653345] scsi host2: ahci
[    0.653377] scsi host3: ahci
[    0.653411] scsi host4: ahci
[    0.653445] scsi host5: ahci
[    0.653459] ata1: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80100 irq 40
[    0.653461] ata2: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80180 irq 40
[    0.653463] ata3: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80200 irq 40
[    0.653465] ata4: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80280 irq 40
[    0.653466] ata5: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80300 irq 40
[    0.653467] ata6: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80380 irq 40
[    0.653486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.653494] ehci-pci: EHCI PCI platform driver
[    0.653499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.653500] ohci-pci: OHCI PCI platform driver
[    0.653503] uhci_hcd: USB Universal Host Controller Interface driver
[    0.653519] usbcore: registered new interface driver usbserial_generic
[    0.653522] usbserial: USB Serial support registered for generic
[    0.653558] rtc_cmos 00:02: RTC can wake from S4
[    0.653718] rtc_cmos 00:02: registered as rtc0
[    0.653757] rtc_cmos 00:02: setting system clock to 2021-11-17T08:27:01 UTC (1637137621)
[    0.653765] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.653829] ledtrig-cpu: registered to indicate activity on CPUs
[    0.653896] hid: raw HID events driver (C) Jiri Kosina
[    0.653927] drop_monitor: Initializing network drop monitor service
[    0.653960] Initializing XFRM netlink socket
[    0.654004] NET: Registered PF_INET6 protocol family
[    0.654906] Freeing initrd memory: 8176K
[    0.656809] Segment Routing with IPv6
[    0.656809] RPL Segment Routing with IPv6
[    0.656819] NET: Registered PF_PACKET protocol family
[    0.657286] microcode: CPU0: patch_level=0x0a201016
[    0.657289] microcode: CPU1: patch_level=0x0a201016
[    0.657292] microcode: CPU2: patch_level=0x0a201016
[    0.657295] microcode: CPU3: patch_level=0x0a201016
[    0.657298] microcode: CPU4: patch_level=0x0a201016
[    0.657302] microcode: CPU5: patch_level=0x0a201016
[    0.657305] microcode: CPU6: patch_level=0x0a201016
[    0.657308] microcode: CPU7: patch_level=0x0a201016
[    0.657310] microcode: CPU8: patch_level=0x0a201016
[    0.657312] microcode: CPU9: patch_level=0x0a201016
[    0.657317] microcode: CPU10: patch_level=0x0a201016
[    0.657321] microcode: CPU11: patch_level=0x0a201016
[    0.657323] microcode: Microcode Update Driver: v2.2.
[    0.657382] resctrl: L3 allocation detected
[    0.657383] resctrl: L3DATA allocation detected
[    0.657384] resctrl: L3CODE allocation detected
[    0.657384] resctrl: MB allocation detected
[    0.657385] resctrl: L3 monitoring detected
[    0.657386] IPI shorthand broadcast: enabled
[    0.657394] sched_clock: Marking stable (340406838, 316971023)->(691328188, -33950327)
[    0.657551] registered taskstats version 1
[    0.657644] Loading compiled-in X.509 certificates
[    0.658792] Loaded X.509 cert 'Build time autogenerated kernel key: 4bf053f8e5c4b77ad32d170608834d80a907d8c3'
[    0.659500] zswap: loaded using pool lz4/z3fold
[    0.659597] Key type ._fscrypt registered
[    0.659598] Key type .fscrypt registered
[    0.659598] Key type fscrypt-provisioning registered
[    0.659778] PM:   Magic number: 13:82:473
[    0.659783] aer 0000:00:07.1:pcie002: hash matches
[    0.659898] RAS: Correctable Errors collector initialized.
[    0.667439] nvme nvme0: Shutdown timeout set to 10 seconds
[    0.673619] nvme nvme0: 32/0/0 default/read/poll queues
[    0.675603]  nvme0n1: p1 p2
[    0.968871] ata1: SATA link down (SStatus 0 SControl 300)
[    1.449922] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.452108] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100
[    1.452930] ata2.00: configured for UDMA/100
[    1.454246] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB00 PQ: 0 ANSI: 5
[    1.648938] tsc: Refined TSC clocksource calibration: 3693.059 MHz
[    1.648947] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a77744cfd5, max_idle_ns: 881590969987 ns
[    1.648985] clocksource: Switched to clocksource tsc
[    1.815816] ata3: SATA link down (SStatus 0 SControl 330)
[    2.128812] ata4: SATA link down (SStatus 0 SControl 330)
[    2.442390] ata5: SATA link down (SStatus 0 SControl 330)
[    3.475589] ata6: failed to resume link (SControl 0)
[    3.475610] ata6: SATA link down (SStatus 0 SControl 0)
[    3.476260] Freeing unused decrypted memory: 2036K
[    3.476515] Freeing unused kernel image (initmem) memory: 1804K
[    3.476517] Write protecting the kernel read-only data: 26624k
[    3.476800] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    3.476924] Freeing unused kernel image (rodata/data gap) memory: 884K
[    3.497672] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.497675] rodata_test: all tests were successful
[    3.497678] Run /init as init process
[    3.497679]   with arguments:
[    3.497680]     /init
[    3.497680]   with environment:
[    3.497680]     HOME=/
[    3.497681]     TERM=linux
[    3.497681]     BOOT_IMAGE=/vmlinuz-linux
[    3.503233] fbcon: Taking over console
[    3.503279] Console: switching to colour frame buffer device 240x67
[    3.759331] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.759337] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
[    3.765427] raid6: skip pq benchmark and using algorithm avx2x4
[    3.765429] raid6: using avx2x2 recovery algorithm
[    3.765923] xor: automatically using best checksumming function   avx       
[    3.795434] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.795436] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.800239] Btrfs loaded, crc32c=crc32c-intel, zoned=yes
[    3.800491] BTRFS: device fsid 8b90b3e6-d80e-445d-adf5-cc65a591b835 devid 1 transid 3380 /dev/nvme0n1p2 scanned by systemd-udevd (235)
[    3.814624] xhci_hcd 0000:05:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    3.814947] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.814950] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[    3.814951] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    3.814996] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[    3.814998] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.814999] usb usb1: Product: xHCI Host Controller
[    3.814999] usb usb1: Manufacturer: Linux 5.14.16-arch1-1 xhci-hcd
[    3.815000] usb usb1: SerialNumber: 0000:05:00.0
[    3.815077] hub 1-0:1.0: USB hub found
[    3.815090] hub 1-0:1.0: 10 ports detected
[    3.815269] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.815277] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[    3.815278] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.815279] usb usb2: Product: xHCI Host Controller
[    3.815280] usb usb2: Manufacturer: Linux 5.14.16-arch1-1 xhci-hcd
[    3.815280] usb usb2: SerialNumber: 0000:05:00.0
[    3.815325] hub 2-0:1.0: USB hub found
[    3.815331] hub 2-0:1.0: 4 ports detected
[    3.815486] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    3.815488] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 3
[    3.815591] xhci_hcd 0000:0b:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[    3.815854] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    3.815855] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 4
[    3.815856] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    3.815870] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[    3.815871] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.815872] usb usb3: Product: xHCI Host Controller
[    3.815872] usb usb3: Manufacturer: Linux 5.14.16-arch1-1 xhci-hcd
[    3.815873] usb usb3: SerialNumber: 0000:0b:00.3
[    3.815917] hub 3-0:1.0: USB hub found
[    3.815923] hub 3-0:1.0: 4 ports detected
[    3.816030] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.816038] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[    3.816039] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.816039] usb usb4: Product: xHCI Host Controller
[    3.816040] usb usb4: Manufacturer: Linux 5.14.16-arch1-1 xhci-hcd
[    3.816040] usb usb4: SerialNumber: 0000:0b:00.3
[    3.816077] hub 4-0:1.0: USB hub found
[    3.816082] hub 4-0:1.0: 4 ports detected
[    3.875580] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.128668] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[    4.215219] BTRFS info (device nvme0n1p2): flagging fs with big metadata feature
[    4.215221] BTRFS info (device nvme0n1p2): disk space caching is enabled
[    4.215222] BTRFS info (device nvme0n1p2): has skinny extents
[    4.225758] random: fast init done
[    4.237302] BTRFS info (device nvme0n1p2): enabling ssd optimizations
[    4.304352] systemd[1]: systemd 249.6-3-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    4.318681] systemd[1]: Detected architecture x86-64.
[    4.318931] systemd[1]: Hostname set to <cedric>.
[    4.343649] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    4.358445] usb 1-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    4.358448] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.358449] usb 1-6: Product: USB2.0 Hub
[    4.365450] hub 1-6:1.0: USB hub found
[    4.369434] hub 1-6:1.0: 4 ports detected
[    4.372186] systemd[1]: Queued start job for default target Graphical Interface.
[    4.372717] systemd[1]: Created slice Slice /system/getty.
[    4.372840] systemd[1]: Created slice Slice /system/modprobe.
[    4.372991] systemd[1]: Created slice Slice /system/syslog-ng.
[    4.373090] systemd[1]: Created slice Slice /system/systemd-fsck.
[    4.373168] systemd[1]: Created slice User and Session Slice.
[    4.373199] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.373219] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.373284] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.373298] systemd[1]: Reached target Local Encrypted Volumes.
[    4.373314] systemd[1]: Reached target Remote File Systems.
[    4.373320] systemd[1]: Reached target Slice Units.
[    4.373329] systemd[1]: Reached target Swaps.
[    4.373339] systemd[1]: Reached target Local Verity Protected Volumes.
[    4.373366] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.373537] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.373976] systemd[1]: Listening on Process Core Dump Socket.
[    4.374031] systemd[1]: Listening on Journal Audit Socket.
[    4.374067] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.374106] systemd[1]: Listening on Journal Socket.
[    4.374361] systemd[1]: Listening on udev Control Socket.
[    4.374395] systemd[1]: Listening on udev Kernel Socket.
[    4.374684] systemd[1]: Mounting Huge Pages File System...
[    4.374989] systemd[1]: Mounting POSIX Message Queue File System...
[    4.375271] systemd[1]: Mounting Kernel Debug File System...
[    4.375606] systemd[1]: Mounting Kernel Trace File System...
[    4.375889] systemd[1]: Mounting Temporary Directory /tmp...
[    4.376238] systemd[1]: Starting Create List of Static Device Nodes...
[    4.376516] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.376810] systemd[1]: Starting Load Kernel Module configfs...
[    4.377096] systemd[1]: Starting Load Kernel Module drm...
[    4.377422] systemd[1]: Starting Load Kernel Module fuse...
[    4.377698] random: lvm: uninitialized urandom read (4 bytes read)
[    4.377727] systemd[1]: Starting Set Up Additional Binary Formats...
[    4.378428] systemd[1]: Starting Journal Service...
[    4.378825] systemd[1]: Starting Load Kernel Modules...
[    4.379245] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.379284] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    4.379828] systemd[1]: Starting Coldplug All udev Devices...
[    4.380677] systemd[1]: Mounted Huge Pages File System.
[    4.380725] systemd[1]: Mounted POSIX Message Queue File System.
[    4.380769] systemd[1]: Mounted Kernel Debug File System.
[    4.380811] systemd[1]: Mounted Kernel Trace File System.
[    4.380856] systemd[1]: Mounted Temporary Directory /tmp.
[    4.381026] systemd[1]: Finished Create List of Static Device Nodes.
[    4.381205] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.381315] systemd[1]: Finished Load Kernel Module configfs.
[    4.381366] fuse: init (API version 7.34)
[    4.381371] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 319 (systemd-binfmt)
[    4.381890] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    4.382308] systemd[1]: Mounting Kernel Configuration File System...
[    4.382460] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.382575] systemd[1]: Finished Load Kernel Module fuse.
[    4.383041] systemd[1]: Mounting FUSE Control File System...
[    4.385836] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.385954] systemd[1]: Finished Load Kernel Module drm.
[    4.387643] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    4.387697] systemd[1]: Mounted Kernel Configuration File System.
[    4.387732] systemd[1]: Mounted FUSE Control File System.
[    4.388031] systemd[1]: Finished Set Up Additional Binary Formats.
[    4.391060] vboxdrv: loading out-of-tree module taints kernel.
[    4.391168] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    4.393014] vboxdrv: Found 12 processor cores
[    4.409119] systemd[1]: Started Journal Service.
[    4.409165] audit: type=1130 audit(1637137625.251:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.415418] vboxdrv: TSC mode is Invariant, tentative frequency 3693057930 Hz
[    4.415419] vboxdrv: Successfully loaded version 6.1.28 r147628 (interface 0x00320000)
[    4.417284] VBoxNetAdp: Successfully started.
[    4.420123] VBoxNetFlt: Successfully started.
[    4.420483] audit: type=1130 audit(1637137625.261:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.423073] audit: type=1130 audit(1637137625.265:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.430586] audit: type=1130 audit(1637137625.271:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.436648] BTRFS info (device nvme0n1p2): use zlib compression, level 3
[    4.436653] BTRFS info (device nvme0n1p2): disk space caching is enabled
[    4.437107] audit: type=1130 audit(1637137625.278:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.440586] systemd-journald[320]: Received client request to flush runtime journal.
[    4.445941] audit: type=1130 audit(1637137625.288:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.448593] audit: type=1130 audit(1637137625.288:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.449062] audit: type=1334 audit(1637137625.291:9): prog-id=14 op=LOAD
[    4.449137] audit: type=1334 audit(1637137625.291:10): prog-id=15 op=LOAD
[    4.533157] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    4.562332] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20210604/utaddress-204)
[    4.562338] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.562464] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    4.563524] ccp 0000:0b:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[    4.567801] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    4.567918] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    4.567930] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    4.568314] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    4.568316] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.569661] cryptd: max_cpu_qlen set to 1000
[    4.573113] Linux agpgart interface v0.103
[    4.574957] AVX2 version of gcm_enc/dec engaged.
[    4.574984] AES CTR mode by8 optimization enabled
[    4.581995] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    4.589966] libphy: r8169: probed
[    4.590097] r8169 0000:07:00.0 eth0: RTL8125B, 18:c0:4d:db:fe:78, XID 641, IRQ 94
[    4.590099] r8169 0000:07:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    4.629168] r8169 0000:07:00.0 eno1: renamed from eth0
[    4.655683] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.656985] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.657140] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.657143] cfg80211: failed to load regulatory.db
[    4.761612] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.764642] Intel(R) Wireless WiFi driver for Linux
[    4.770659] snd_hda_intel 0000:09:00.1: Handle vga_switcheroo audio client
[    4.770662] snd_hda_intel 0000:09:00.1: Force to non-snoop mode
[    4.781159] iwlwifi 0000:08:00.0: WRT: Overriding region id 0
[    4.781163] iwlwifi 0000:08:00.0: WRT: Overriding region id 1
[    4.781165] iwlwifi 0000:08:00.0: WRT: Overriding region id 2
[    4.781166] iwlwifi 0000:08:00.0: WRT: Overriding region id 3
[    4.781167] iwlwifi 0000:08:00.0: WRT: Overriding region id 4
[    4.781168] iwlwifi 0000:08:00.0: WRT: Overriding region id 6
[    4.781169] iwlwifi 0000:08:00.0: WRT: Overriding region id 8
[    4.781170] iwlwifi 0000:08:00.0: WRT: Overriding region id 9
[    4.781171] iwlwifi 0000:08:00.0: WRT: Overriding region id 10
[    4.781172] iwlwifi 0000:08:00.0: WRT: Overriding region id 11
[    4.781174] iwlwifi 0000:08:00.0: WRT: Overriding region id 15
[    4.781175] iwlwifi 0000:08:00.0: WRT: Overriding region id 16
[    4.781176] iwlwifi 0000:08:00.0: WRT: Overriding region id 18
[    4.781177] iwlwifi 0000:08:00.0: WRT: Overriding region id 19
[    4.781178] iwlwifi 0000:08:00.0: WRT: Overriding region id 20
[    4.781179] iwlwifi 0000:08:00.0: WRT: Overriding region id 21
[    4.781180] iwlwifi 0000:08:00.0: WRT: Overriding region id 28
[    4.781412] iwlwifi 0000:08:00.0: loaded firmware version 46.6b541b68.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
[    4.798109] random: dhcpcd: uninitialized urandom read (112 bytes read)
[    4.816750] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input3
[    4.816792] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input4
[    4.816820] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input5
[    4.816844] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input6
[    4.816870] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input7
[    4.824725] kvm: disabled by bios
[    4.826098] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    4.826101] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.826102] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.826103] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.826103] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    4.826104] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.826104] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.826105] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.826106] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    4.827543] 8021q: 802.1Q VLAN Support v1.8
[    4.839869] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input8
[    4.839915] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input9
[    4.839946] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input10
[    4.839971] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input11
[    4.839999] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input12
[    4.840147] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input13
[    4.840176] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input14
[    4.865345] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC)
[    4.921952] kvm: disabled by bios
[    4.922128] [drm] amdgpu kernel modesetting enabled.
[    4.923144] MCE: In-kernel MCE decoding enabled.
[    4.928641] amdgpu: Ignoring ACPI CRAT on non-APU system
[    4.928643] amdgpu: Virtual CRAT table created for CPU
[    4.928654] amdgpu: Topology: Add CPU node
[    4.928716] checking generic (d0000000 1fb0000) vs hw (d0000000 10000000)
[    4.928717] fb0: switching to amdgpudrmfb from VESA VGA
[    4.928788] Console: switching to colour dummy device 80x25
[    4.928808] amdgpu 0000:09:00.0: vgaarb: deactivate vga console
[    4.928886] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1462:0x8A90 0xC7).
[    4.928889] amdgpu 0000:09:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[    4.928895] [drm] register mmio base: 0xFCF00000
[    4.928896] [drm] register mmio size: 262144
[    4.928904] [drm] add ip block number 0 <vi_common>
[    4.928905] [drm] add ip block number 1 <gmc_v8_0>
[    4.928906] [drm] add ip block number 2 <tonga_ih>
[    4.928907] [drm] add ip block number 3 <gfx_v8_0>
[    4.928908] [drm] add ip block number 4 <sdma_v3_0>
[    4.928909] [drm] add ip block number 5 <powerplay>
[    4.928910] [drm] add ip block number 6 <dm>
[    4.928910] [drm] add ip block number 7 <uvd_v6_0>
[    4.928911] [drm] add ip block number 8 <vce_v3_0>
[    4.929154] amdgpu 0000:09:00.0: No more image in the PCI ROM
[    4.929175] amdgpu 0000:09:00.0: amdgpu: Fetched VBIOS from ROM BAR
[    4.929177] amdgpu: ATOM BIOS: 113-d09001-e02
[    4.929193] [drm] UVD is enabled in VM mode
[    4.929194] [drm] UVD ENC is enabled in VM mode
[    4.929196] [drm] VCE enabled in VM mode
[    4.929219] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    4.929769] amdgpu 0000:09:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[    4.929771] amdgpu 0000:09:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[    4.929776] [drm] Detected VRAM RAM=2048M, BAR=256M
[    4.929777] [drm] RAM width 128bits GDDR5
[    4.929799] [drm] amdgpu: 2048M of VRAM memory ready
[    4.929800] [drm] amdgpu: 3072M of GTT memory ready.
[    4.929802] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    4.932281] [drm] PCIE GART of 256M enabled (table at 0x000000F401FA4000).
[    4.933092] [drm] Chained IB support enabled!
[    4.935702] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[    4.936142] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    4.937012] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    4.970205] usb 1-7: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    4.970208] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.970209] usb 1-7: Product: ITE Device
[    4.970210] usb 1-7: Manufacturer: ITE Tech. Inc.
[    5.033152] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[    5.033177] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[    5.033193] [drm] Display Core initialized with v3.2.141!
[    5.038835] r8169 0000:07:00.0 eno1: Link is Down
[    5.042047] snd_hda_intel 0000:09:00.1: bound 0000:09:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    5.065705] kvm: disabled by bios
[    5.066722] intel_rapl_common: Found RAPL domain package
[    5.066723] intel_rapl_common: Found RAPL domain core
[    5.069992] iwlwifi 0000:08:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x324
[    5.076266] thermal thermal_zone0: failed to read out thermal zone (-61)
[    5.116657] iwlwifi 0000:08:00.0: base HW address: bc:17:b8:b7:ae:da
[    5.165316] usb 1-9: new high-speed USB device number 4 using xhci_hcd
[    5.184771] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.186009] iwlwifi 0000:08:00.0 wlp8s0: renamed from wlan0
[    5.195114] [drm] UVD and UVD ENC initialized successfully.
[    5.225612] kvm: disabled by bios
[    5.296042] [drm] VCE initialized successfully.
[    5.297626] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    5.297719] amdgpu: SRAT table not found
[    5.297720] amdgpu: Virtual CRAT table created for GPU
[    5.297741] amdgpu: Topology: Add dGPU node [0x699f:0x1002]
[    5.297743] kfd kfd: amdgpu: added device 1002:699f
[    5.297761] amdgpu 0000:09:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 5, active_cu_number 8
[    5.303577] [drm] fb mappable at 0xD24D4000
[    5.303578] [drm] vram apper at 0xD0000000
[    5.303579] [drm] size 33177600
[    5.303579] [drm] fb depth is 24
[    5.303579] [drm]    pitch is 15360
[    5.303618] fbcon: amdgpu (fb0) is primary device
[    5.380407] usb 1-9: New USB device found, idVendor=050d, idProduct=0234, bcdDevice= 0.00
[    5.380410] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.383550] kvm: disabled by bios
[    5.387399] hub 1-9:1.0: USB hub found
[    5.390379] hub 1-9:1.0: 4 ports detected
[    5.545823] kvm: disabled by bios
[    5.601981] usb 1-10: new high-speed USB device number 5 using xhci_hcd
[    5.630117] Console: switching to colour frame buffer device 240x67
[    5.646960] amdgpu 0000:09:00.0: [drm] fb0: amdgpu frame buffer device
[    5.676311] amdgpu 0000:09:00.0: amdgpu: Using BACO for runtime pm
[    5.676495] [drm] Initialized amdgpu 3.42.0 20150101 for 0000:09:00.0 on minor 0
[    5.745377] kvm: disabled by bios
[    5.831371] usb 1-10: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    5.831373] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.831375] usb 1-10: Product: USB2.0 Hub
[    5.840393] hub 1-10:1.0: USB hub found
[    5.844361] hub 1-10:1.0: 4 ports detected
[    5.899995] hid-generic 0003:048D:5702.0001: hiddev96,hidraw0: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:05:00.0-7/input0
[    5.900016] usbcore: registered new interface driver usbhid
[    5.900017] usbhid: USB HID core driver
[    5.900161] kvm: disabled by bios
[    5.925310] usb 1-9.2: new low-speed USB device number 6 using xhci_hcd
[    6.053143] kvm: disabled by bios
[    6.185355] usb 1-9.2: New USB device found, idVendor=046d, idProduct=c03e, bcdDevice=20.00
[    6.185357] usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.185359] usb 1-9.2: Product: USB-PS/2 Optical Mouse
[    6.185360] usb 1-9.2: Manufacturer: Logitech
[    6.201958] random: crng init done
[    6.201959] random: 3 urandom warning(s) missed due to ratelimiting
[    6.212914] kvm: disabled by bios
[    6.216738] kauditd_printk_skb: 18 callbacks suppressed
[    6.216739] audit: type=1130 audit(1637137627.058:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.218405] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:05:00.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C03E.0002/input/input15
[    6.218451] hid-generic 0003:046D:C03E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:05:00.0-9.2/input0
[    6.285299] usb 1-10.1: new high-speed USB device number 7 using xhci_hcd
[    6.417531] audit: type=1130 audit(1637137627.258:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=syslog-ng@default comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.548324] usb 1-10.1: New USB device found, idVendor=0bda, idProduct=525d, bcdDevice=58.01
[    6.548328] usb 1-10.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    6.548330] usb 1-10.1: Product: HK 2M CAM
[    6.548331] usb 1-10.1: Manufacturer: WDH
[    6.548332] usb 1-10.1: SerialNumber: 202001010001
[    6.642297] usb 1-9.3: new low-speed USB device number 8 using xhci_hcd
[    6.907345] usb 1-9.3: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[    6.907351] usb 1-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.907353] usb 1-9.3: Product: USB Keyboard
[    6.907355] usb 1-9.3: Manufacturer: Logitech
[    6.976762] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:05:00.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:046D:C31C.0003/input/input16
[    7.032488] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:05:00.0-9.3/input0
[    7.045282] usb 1-10.2: new high-speed USB device number 9 using xhci_hcd
[    7.132512] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:05:00.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C31C.0004/input/input17
[    7.188988] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:05:00.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C31C.0004/input/input18
[    7.189064] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:05:00.0-9.3/input1
[    7.218726] mousedev: PS/2 mouse device common for all mice
[    7.227795] audit: type=1130 audit(1637137628.068:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=gpm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.727303] usb 1-10.2: New USB device found, idVendor=0bda, idProduct=0151, bcdDevice=51.95
[    7.727310] usb 1-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.727312] usb 1-10.2: Product: USB2.0-CRW
[    7.727314] usb 1-10.2: Manufacturer: Generic
[    7.727315] usb 1-10.2: SerialNumber: 20060413092100000
[    7.845233] usb 1-10.4: new high-speed USB device number 10 using xhci_hcd
[    7.981450] r8169 0000:07:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[    7.981464] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[    7.984276] usb 1-10.4: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[    7.984280] usb 1-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.984283] usb 1-10.4: Product: Nexcopy Device  
[    7.984284] usb 1-10.4: Manufacturer: Generic 
[    7.984285] usb 1-10.4: SerialNumber: 032019-27618
[    8.021985] mc: Linux media interface: v0.10
[    8.022428] usb-storage 1-10.2:1.0: USB Mass Storage device detected
[    8.022495] scsi host6: usb-storage 1-10.2:1.0
[    8.022543] usb-storage 1-10.4:1.0: USB Mass Storage device detected
[    8.022581] usb-storage 1-10.4:1.0: Quirks match for vid 090c pid 1000: 400
[    8.022599] scsi host7: usb-storage 1-10.4:1.0
[    8.022647] usbcore: registered new interface driver usb-storage
[    8.023779] usbcore: registered new interface driver uas
[    8.028083] videodev: Linux video capture interface: v2.00
[    8.044256] usb 1-10.1: current rate 48000 is different from the runtime rate 8000
[    8.260265] usb 1-10.1: current rate 48000 is different from the runtime rate 16000
[    8.477540] usb 1-10.1: current rate 48000 is different from the runtime rate 44100
[    8.910261] usb 1-10.1: current rate 48000 is different from the runtime rate 8000
[    9.049403] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    9.055537] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    9.061649] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    9.067784] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    9.126218] usb 1-10.1: current rate 48000 is different from the runtime rate 16000
[    9.226102] scsi 7:0:0:0: Direct-Access     Generic  Mass Storage     1100 PQ: 0 ANSI: 6
[    9.227096] sd 7:0:0:0: [sda] 62914560 512-byte logical blocks: (32.2 GB/30.0 GiB)
[    9.227734] sd 7:0:0:0: [sda] Write Protect is off
[    9.227738] sd 7:0:0:0: [sda] Mode Sense: 43 00 00 00
[    9.228357] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.266461]  sda: sda1
[    9.268898] sd 7:0:0:0: [sda] Attached SCSI removable disk
[    9.342224] usb 1-10.1: current rate 48000 is different from the runtime rate 44100
[    9.814415] usbcore: registered new interface driver snd-usb-audio
[    9.817201] usb 1-10.1: Found UVC 1.00 device HK 2M CAM (0bda:525d)
[    9.837855] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[    9.885304] input: HK 2M CAM: HK 2M CAM as /devices/pci0000:00/0000:00:01.2/0000:05:00.0/usb1/1-10/1-10.1/1-10.1:1.0/input/input19
[    9.885352] usbcore: registered new interface driver uvcvideo
[   10.101627] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.202652] audit: type=1131 audit(1637137631.045:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.240024] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   10.331519] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.459823] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[   10.548264] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.674977] sd 6:0:0:3: [sde] Attached SCSI removable disk
[   10.764836] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   10.975009] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.188338] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.404982] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.615008] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   11.825148] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.034988] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.244962] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.367670] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[   12.455029] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.665064] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   12.875068] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.095053] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.304958] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.521353] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.741719] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   13.961646] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.181564] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   14.404983] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.781521] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   16.994840] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   17.214924] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   17.431714] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.484793] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   18.714784] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.554755] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.771536] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   19.984738] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   20.201413] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.048058] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.278046] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.491385] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   21.718036] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.324685] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.541349] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.751315] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   22.961329] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.607942] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   23.837968] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.051290] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   24.277984] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.097938] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.311257] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.521257] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   25.731356] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.167997] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.397985] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.611304] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   26.837878] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   27.871349] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   28.081156] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   28.291201] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   28.501152] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   28.728018] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   28.957855] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   29.171144] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   29.397920] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   30.647765] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   30.861092] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   31.077747] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   31.291088] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   31.511215] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   31.731148] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   31.947713] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   32.161017] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   34.487871] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   34.717648] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   35.547585] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   35.770912] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   35.987662] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   36.214228] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   36.427588] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   36.647580] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   37.047646] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   37.274313] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   38.537540] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   38.764197] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   38.977598] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   39.204172] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   40.247517] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   40.474139] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   41.097438] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   41.324086] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   41.537441] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   41.750772] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   42.807519] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   43.037483] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   43.657369] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   43.884055] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   44.097362] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   44.327445] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   45.367343] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   46.220628] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   46.437352] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   46.653948] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   46.867279] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   47.084041] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   47.297275] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   47.714004] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   48.994031] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   49.224017] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   49.444102] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   49.657203] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   49.877202] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   50.097267] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   50.317273] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   50.543879] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   51.553808] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   51.780550] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   52.193792] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   52.407203] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   52.623779] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   52.833771] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   53.043827] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   53.270452] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   54.113838] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   54.963823] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   55.173879] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   55.383691] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   55.593702] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   55.803775] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   56.030523] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   56.457063] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   56.683676] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   57.740287] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   57.953711] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   58.163710] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   58.376934] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   58.593591] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   58.820292] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   59.033579] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   59.260273] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   60.513536] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   60.723626] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   60.943575] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   61.163534] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   61.383571] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   61.600184] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   61.820207] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   62.033488] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   63.286878] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   63.503539] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   63.723492] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   63.943439] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   64.160186] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   64.383426] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   64.600082] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   64.813416] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   66.060042] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   66.270036] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   66.480176] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   66.690060] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   66.910033] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   67.120052] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   67.329995] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   67.540156] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   68.829953] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   69.039983] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   69.250040] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   69.459952] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   69.686626] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   71.603230] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   72.029843] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   72.249865] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   73.949909] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   74.379815] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   74.589802] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   76.299737] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   76.519735] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   76.739719] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   76.956351] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   77.179712] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   77.396367] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   77.609701] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   77.829688] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   79.073072] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   79.296330] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   79.509742] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   79.739721] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   80.139623] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   80.369645] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   81.632904] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   81.862908] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   82.076226] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   82.289552] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   82.506380] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   82.716223] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   82.926234] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   83.152893] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   84.188989] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   84.416255] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   84.832925] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   85.046230] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   85.256131] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   85.466131] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   85.676132] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   85.902813] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   87.816070] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   88.042818] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   88.255561] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   88.886024] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   89.112860] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   89.736019] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   89.962664] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   90.379410] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   90.596016] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   90.812638] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   91.026069] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   91.445954] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   92.299257] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   93.152574] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   93.365970] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   93.582632] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   93.799293] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   94.015883] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   94.245940] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[   94.645946] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  119.388543] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  122.483821] audit: type=1100 audit(1637137743.328:33): pid=481 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[  122.493210] audit: type=1101 audit(1637137743.338:34): pid=481 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[  122.493576] audit: type=1103 audit(1637137743.338:35): pid=481 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="cedric" exe="/usr/bin/login" hostname=cedric addr=? terminal=/dev/tty1 res=success'
[  122.493602] audit: type=1006 audit(1637137743.338:36): pid=481 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[  122.493605] audit: type=1300 audit(1637137743.338:36): arch=c000003e syscall=1 success=yes exit=4 a0=5 a1=7ffeb06925a0 a2=4 a3=3e8 items=0 ppid=1 pid=481 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=1000 fsgid=0 tty=tty1 ses=1 comm="login" exe="/usr/bin/login" key=(null)
[  122.493606] audit: type=1327 audit(1637137743.338:36): proctitle=2F62696E2F6C6F67696E002D70002D2D
[  122.503495] audit: type=1130 audit(1637137743.348:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  122.506398] audit: type=1101 audit(1637137743.352:38): pid=717 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="cedric" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  122.506409] audit: type=1103 audit(1637137743.352:39): pid=717 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="cedric" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[  122.506430] audit: type=1006 audit(1637137743.352:40): pid=717 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[  124.724433] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  124.954426] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  125.574940] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  125.944382] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  126.154394] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  126.364415] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  126.584411] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  126.824379] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  127.203108] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  127.294540] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  129.624325] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  131.974704] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  133.768780] kauditd_printk_skb: 13 callbacks suppressed
[  133.768782] audit: type=1334 audit(1637137754.615:50): prog-id=21 op=LOAD
[  133.768833] audit: type=1334 audit(1637137754.615:51): prog-id=22 op=LOAD
[  133.797678] audit: type=1130 audit(1637137754.642:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  134.321347] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  134.534658] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  134.754629] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  135.695960] PM: suspend entry (deep)
[  135.712434] Filesystems sync: 0.016 seconds
[  135.712774] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  135.713963] OOM killer disabled.
[  135.713964] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[  135.714787] printk: Suspending console(s) (use no_console_suspend to debug)
[  135.733217] r8169 0000:07:00.0 eno1: Link is Down
[  135.762031] sd 7:0:0:0: [sda] Synchronizing SCSI cache
[  136.135222] ACPI: PM: Preparing to enter system sleep state S3
[  136.472238] ACPI: PM: Saving platform NVS memory
[  136.472307] Disabling non-boot CPUs ...
[  136.473319] IRQ 101: no longer affine to CPU1
[  136.474337] smpboot: CPU 1 is now offline
[  136.475434] IRQ 102: no longer affine to CPU2
[  136.476519] smpboot: CPU 2 is now offline
[  136.477611] IRQ 103: no longer affine to CPU3
[  136.478630] smpboot: CPU 3 is now offline
[  136.480603] smpboot: CPU 4 is now offline
[  136.482565] smpboot: CPU 5 is now offline
[  136.484412] smpboot: CPU 6 is now offline
[  136.484759] Spectre V2 : Update user space SMT mitigation: STIBP off
[  136.486108] smpboot: CPU 7 is now offline
[  136.487925] smpboot: CPU 8 is now offline
[  136.489972] smpboot: CPU 9 is now offline
[  136.491792] smpboot: CPU 10 is now offline
[  136.493577] smpboot: CPU 11 is now offline
[  136.494337] ACPI: PM: Low-level resume complete
[  136.494375] ACPI: PM: Restoring platform NVS memory
[  136.494589] LVT offset 0 assigned for vector 0x400
[  136.495013] Enabling non-boot CPUs ...
[  136.495061] x86: Booting SMP configuration:
[  136.495061] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  136.495175] microcode: CPU1: patch_level=0x0a201016
[  136.497916] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[  136.498980] CPU1 is up
[  136.498996] smpboot: Booting Node 0 Processor 2 APIC 0x4
[  136.499130] microcode: CPU2: patch_level=0x0a201016
[  136.501349] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[  136.502308] CPU2 is up
[  136.502329] smpboot: Booting Node 0 Processor 3 APIC 0x6
[  136.502426] microcode: CPU3: patch_level=0x0a201016
[  136.504637] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[  136.505641] CPU3 is up
[  136.505656] smpboot: Booting Node 0 Processor 4 APIC 0x8
[  136.505773] microcode: CPU4: patch_level=0x0a201016
[  136.507985] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[  136.508992] CPU4 is up
[  136.509007] smpboot: Booting Node 0 Processor 5 APIC 0xa
[  136.509107] microcode: CPU5: patch_level=0x0a201016
[  136.511318] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[  136.512339] CPU5 is up
[  136.512353] smpboot: Booting Node 0 Processor 6 APIC 0x1
[  136.512478] microcode: CPU6: patch_level=0x0a201016
[  136.514712] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[  136.515740] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[  136.515756] CPU6 is up
[  136.515782] smpboot: Booting Node 0 Processor 7 APIC 0x3
[  136.515883] microcode: CPU7: patch_level=0x0a201016
[  136.518101] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[  136.519069] CPU7 is up
[  136.519086] smpboot: Booting Node 0 Processor 8 APIC 0x5
[  136.519207] microcode: CPU8: patch_level=0x0a201016
[  136.521421] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[  136.522430] CPU8 is up
[  136.522448] smpboot: Booting Node 0 Processor 9 APIC 0x7
[  136.522550] microcode: CPU9: patch_level=0x0a201016
[  136.524769] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[  136.525784] CPU9 is up
[  136.525801] smpboot: Booting Node 0 Processor 10 APIC 0x9
[  136.525926] microcode: CPU10: patch_level=0x0a201016
[  136.528146] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[  136.529158] CPU10 is up
[  136.529174] smpboot: Booting Node 0 Processor 11 APIC 0xb
[  136.529289] microcode: CPU11: patch_level=0x0a201016
[  136.531517] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[  136.532523] CPU11 is up
[  136.533317] ACPI: PM: Waking up from system sleep state S3
[  136.606656] usb usb1: root hub lost power or was reset
[  136.606658] usb usb2: root hub lost power or was reset
[  136.705785] nvme nvme0: Shutdown timeout set to 10 seconds
[  136.711122] nvme nvme0: 32/0/0 default/read/poll queues
[  136.728931] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000).
[  136.795609] r8169 0000:07:00.0 eno1: Link is Down
[  136.918557] ata1: SATA link down (SStatus 0 SControl 300)
[  136.918580] ata3: SATA link down (SStatus 0 SControl 330)
[  136.920159] ata4: SATA link down (SStatus 0 SControl 330)
[  136.920211] ata5: SATA link down (SStatus 0 SControl 330)
[  137.055796] usb 1-10: reset high-speed USB device number 5 using xhci_hcd
[  137.075551] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  137.092566] ata2.00: configured for UDMA/100
[  137.109446] [drm] UVD and UVD ENC initialized successfully.
[  137.210414] [drm] VCE initialized successfully.
[  137.459314] usb 1-7: reset full-speed USB device number 3 using xhci_hcd
[  137.639133] ata6: failed to resume link (SControl 0)
[  137.639149] ata6: SATA link down (SStatus 0 SControl 0)
[  137.942940] usb 1-9: reset high-speed USB device number 4 using xhci_hcd
[  138.342949] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[  138.636237] usb 1-10.1: reset high-speed USB device number 7 using xhci_hcd
[  138.985902] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  139.792559] r8169 0000:07:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[  139.796151] usb 1-10.4: reset high-speed USB device number 10 using xhci_hcd
[  140.189257] usb 1-9.3: reset low-speed USB device number 8 using xhci_hcd
[  140.862968] usb 1-9.2: reset low-speed USB device number 6 using xhci_hcd
[  141.298486] OOM killer enabled.
[  141.298487] Restarting tasks ... done.
[  141.300210] PM: suspend exit
[  141.301395] audit: type=1130 audit(1637137763.803:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  141.301399] audit: type=1131 audit(1637137763.803:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  141.401971] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  141.621973] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  143.708539] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[  143.971417] audit: type=1100 audit(1637137766.473:55): pid=1161 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[  143.971450] audit: type=1101 audit(1637137766.473:56): pid=1161 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[  143.971781] audit: type=1103 audit(1637137766.473:57): pid=1161 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[  143.971833] audit: type=1105 audit(1637137766.473:58): pid=1161 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=? addr=? terminal=/dev/pts/0 res=success'
[  146.058534] usb 1-10.2: reset high-speed USB device number 9 using xhci_hcd
[root@cedric cedric]# 

Now restore the system to kernel 5.15, and downgrade the BIOS to f12

nxij

Member

Registered: 2021-11-17

Posts: 1

Re: updated BIOS: system immediately resumes from suspend (Gigabyte B550)

Run this command:

/bin/bash -c "echo GPP0 >> /proc/acpi/wakeup"

Then try to suspend, if it works make it persistent with a service

Create this service:

/etc/systemd/system/wakeup-disable_GPP0.service

[Unit]
Description=Fix suspend by disabling GPP0 sleepstate thingie

[Service]
ExecStart=/bin/bash -c "echo GPP0 >> /proc/acpi/wakeup"

[Install]
WantedBy=multi-user.target

systemctl enable wakeup-disable_GPP0.service
systemctl start wakeup-disable_GPP0.service

Had a similar issue a while back, also on 5600x but B550m.

See if it works (you can then proceed with updating to the latest bios and kernel)

Last edited by nxij (2021-11-17 16:17:15)

mdhen

Member

Registered: 2022-05-15

Posts: 1

Re: updated BIOS: system immediately resumes from suspend (Gigabyte B550)

Run this command:

/bin/bash -c "echo GPP0 >> /proc/acpi/wakeup"

Then try to suspend, if it works make it persistent with a service

Create this service:

/etc/systemd/system/wakeup-disable_GPP0.service

[Unit]
Description=Fix suspend by disabling GPP0 sleepstate thingie

[Service]
ExecStart=/bin/bash -c "echo GPP0 >> /proc/acpi/wakeup"

[Install]
WantedBy=multi-user.target

systemctl enable wakeup-disable_GPP0.service
systemctl start wakeup-disable_GPP0.service

Had a similar issue a while back, also on 5600x but B550m.

See if it works (you can then proceed with updating to the latest bios and kernel)

This solved the issue for me on the gigabyte B550I with latest firmware (F16b) and kernel 5.17

Last edited by mdhen (2022-05-15 13:02:41)

2ManyDogs

Forum Fellow

Registered: 2012-01-15

Posts: 4,645

Re: updated BIOS: system immediately resumes from suspend (Gigabyte B550)

Closing this old thread.