You are not logged in.

Pages: 1

#1 2021-12-01 14:10:51

MSco
Member
Registered: 2021-12-01
Posts: 18

[SOLVED] Bluetooth headset connects to bluetooth, but no sound

My bluetooth headset connects successfully to my bluetooth audio transmitter adapter and is listed as audio device in the pulseaudio list as UACDemoV1.0 Analog Stereo. However, there is no sound output.

On windows 10, I have no problems by using this dongle and this headset

My bluetooth audio transmitter adapter: Jieli Technology PC-T7.
My headset: Epos H3 Hybrid

I have installed pulseaudio-modules-bt and libldac

Here is the output of pactl list

Modul #0
	Name: module-device-restore
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute state of devices"
		module.version = "15.0"

Modul #1
	Name: module-stream-restore
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.version = "15.0"

Modul #2
	Name: module-card-restore
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore profile of cards"
		module.version = "15.0"

Modul #3
	Name: module-augment-properties
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "Augment the property sets of streams with additional static information"
		module.version = "15.0"

Modul #4
	Name: module-switch-on-port-available
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "David Henningsson"
		module.description = "Switches ports and profiles when devices are plugged/unplugged"
		module.version = "15.0"

Modul #5
	Name: module-udev-detect
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "Detect available audio hardware and load matching drivers"
		module.version = "15.0"

Modul #6
	Name: module-alsa-card
	Argument: device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
	Nutzungszähler: 0
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "15.0"

Modul #7
	Name: module-alsa-card
	Argument: device_id="2" name="usb-046d_0825_B975BB10-02" card_name="alsa_card.usb-046d_0825_B975BB10-02" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
	Nutzungszähler: 0
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "15.0"

Modul #8
	Name: module-alsa-card
	Argument: device_id="0" name="pci-0000_00_1f.3" card_name="alsa_card.pci-0000_00_1f.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
	Nutzungszähler: 0
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "15.0"

Modul #9
	Name: module-jackdbus-detect
	Argument: channels=2
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "David Henningsson"
		module.description = "Adds JACK sink/source ports when JACK is started"
		module.version = "15.0"

Modul #10
	Name: module-bluetooth-policy
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Frédéric Dalleau, Pali Rohár"
		module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
		module.version = "15.0"

Modul #11
	Name: module-bluetooth-discover
	Argument: a2dp_config="ldac_eqmid=hq ldac_fmt=f32"
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "João Paulo Rechi Vita"
		module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
		module.version = "15.0"

Modul #12
	Name: module-bluez5-discover
	Argument: a2dp_config="ldac_eqmid=hq ldac_fmt=f32"
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "João Paulo Rechi Vita"
		module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
		module.version = "15.0"

Modul #13
	Name: module-switch-on-connect
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Michael Terry"
		module.description = "When a sink/source is added, switch to it or conditionally switch to it"
		module.version = "15.0"

Modul #14
	Name: module-dbus-protocol
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Tanu Kaskinen"
		module.description = "D-Bus interface"
		module.version = "15.0"

Modul #15
	Name: module-native-protocol-unix
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "Native protocol (UNIX sockets)"
		module.version = "15.0"

Modul #16
	Name: module-gsettings
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Sylvain Baubeau"
		module.description = "GSettings Adapter"
		module.version = "15.0"

Modul #17
	Name: module-default-device-restore
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the default sink and source"
		module.version = "15.0"

Modul #18
	Name: module-always-sink
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Colin Guthrie"
		module.description = "Hält stets ein Ziel geladen, selbst wenn dies ein Null-Ziel ist"
		module.version = "15.0"

Modul #19
	Name: module-intended-roles
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "Automatically set device of streams based on intended roles of devices"
		module.version = "15.0"

Modul #20
	Name: module-suspend-on-idle
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is idle for too long, suspend it"
		module.version = "15.0"

Modul #21
	Name: module-console-kit
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each ConsoleKit session of this user"
		module.version = "15.0"

Modul #22
	Name: module-systemd-login
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each login session of this user"
		module.version = "15.0"

Modul #23
	Name: module-position-event-sounds
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
		module.version = "15.0"

Modul #24
	Name: module-role-cork
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "Mute & cork streams with certain roles while others exist"
		module.version = "15.0"

Modul #25
	Name: module-filter-heuristics
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Colin Guthrie"
		module.description = "Detect when various filters are desirable"
		module.version = "15.0"

Modul #26
	Name: module-filter-apply
	Argument: 
	Nutzungszähler: k. A.
	Eigenschaften:
		module.author = "Colin Guthrie"
		module.description = "Load filter sinks automatically when needed"
		module.version = "15.0"

Modul #29
	Name: module-alsa-card
	Argument: device_id="3" name="usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01" card_name="alsa_card.usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
	Nutzungszähler: 0
	Eigenschaften:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "15.0"

Ziel #0
	Status: SUSPENDED
	Name: alsa_output.pci-0000_01_00.1.hdmi-stereo-extra1
	Beschreibung: GP107GL High Definition Audio Controller Digital Stereo (HDMI 2)
	Treiber: module-alsa-card.c
	Abtastwert-Angabe: s16le 2ch 44100Hz
	Kanalzuordnung: front-left,front-right
	Besitzer-Modul: 6
	Stumm: nein
	Lautstärke: front-left: 38010 /  58% / -14,19 dB,   front-right: 38010 /  58% / -14,19 dB
	        Verteilung 0,00
	Basis-Lautstärke: 65536 / 100% / 0,00 dB
	Quellen-Monitor: alsa_output.pci-0000_01_00.1.hdmi-stereo-extra1.monitor
	Latenz: 0 usec, eingestellt 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
	Eigenschaften:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 1"
		alsa.id = "HDMI 1"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "7"
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xdf080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "0fb9"
		device.product.name = "GP107GL High Definition Audio Controller"
		device.string = "hdmi:1,1"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo-extra1"
		device.profile.description = "Digital Stereo (HDMI 2)"
		device.description = "GP107GL High Definition Audio Controller Digital Stereo (HDMI 2)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, available)
	Aktiver Port: hdmi-output-1
	Formate:
		pcm

Ziel #1
	Status: SUSPENDED
	Name: alsa_output.pci-0000_00_1f.3.iec958-stereo
	Beschreibung: Internes Audio Digital Stereo (IEC958)
	Treiber: module-alsa-card.c
	Abtastwert-Angabe: s16le 2ch 44100Hz
	Kanalzuordnung: front-left,front-right
	Besitzer-Modul: 8
	Stumm: nein
	Lautstärke: front-left: 68157 / 104% / 1,02 dB,   front-right: 68157 / 104% / 1,02 dB
	        Verteilung 0,00
	Basis-Lautstärke: 65536 / 100% / 0,00 dB
	Quellen-Monitor: alsa_output.pci-0000_00_1f.3.iec958-stereo.monitor
	Latenz: 0 usec, eingestellt 0 usec
	Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY SET_FORMATS 
	Eigenschaften:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC1220 Digital"
		alsa.id = "ALC1220 Digital"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "1"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xdf240000 irq 137"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a2f0"
		device.product.name = "200 Series PCH HD Audio"
		device.form_factor = "internal"
		device.string = "iec958:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "iec958-stereo"
		device.profile.description = "Digital Stereo (IEC958)"
		device.description = "Internes Audio Digital Stereo (IEC958)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, availability unknown)
	Aktiver Port: iec958-stereo-output
	Formate:
		pcm

Ziel #4
	Status: SUSPENDED
	Name: alsa_output.usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01.analog-stereo
	Beschreibung: UACDemoV1.0 Analog Stereo
	Treiber: module-alsa-card.c
	Abtastwert-Angabe: s16le 2ch 48000Hz
	Kanalzuordnung: front-left,front-right
	Besitzer-Modul: 29
	Stumm: nein
	Lautstärke: front-left: 64587 /  99% / -0,38 dB,   front-right: 64587 /  99% / -0,38 dB
	        Verteilung 0,00
	Basis-Lautstärke: 64587 /  99% / -0,38 dB
	Quellen-Monitor: alsa_output.usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01.analog-stereo.monitor
	Latenz: 0 usec, eingestellt 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Eigenschaften:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "3"
		alsa.card_name = "UACDemoV1.0"
		alsa.long_card_name = "Jieli Technology UACDemoV1.0 at usb-0000:00:14.0-3.3, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:3.3:1.1"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/sound/card3"
		udev.id = "usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01"
		device.bus = "usb"
		device.vendor.id = "4c4a"
		device.vendor.name = "Jieli Technology"
		device.product.id = "4155"
		device.product.name = "UACDemoV1.0"
		device.serial = "Jieli_Technology_UACDemoV1.0_4542BF943C234C53"
		device.string = "front:3"
		device.buffering.buffer_size = "384000"
		device.buffering.fragment_size = "192000"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "UACDemoV1.0 Analog Stereo"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Ports:
		analog-output: Analog Output (type: Analog, priority: 9900, availability unknown)
	Aktiver Port: analog-output
	Formate:
		pcm

Quelle #0
	Status: SUSPENDED
	Name: alsa_output.pci-0000_01_00.1.hdmi-stereo-extra1.monitor
	Beschreibung: Monitor of GP107GL High Definition Audio Controller Digital Stereo (HDMI 2)
	Treiber: module-alsa-card.c
	Abtastwert-Angabe: s16le 2ch 44100Hz
	Kanalzuordnung: front-left,front-right
	Besitzer-Modul: 6
	Stumm: nein
	Lautstärke: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        Verteilung 0,00
	Basis-Lautstärke: 65536 / 100% / 0,00 dB
	Ziel-Monitor: alsa_output.pci-0000_01_00.1.hdmi-stereo-extra1
	Latenz: 0 usec, eingestellt 0 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Eigenschaften:
		device.description = "Monitor of GP107GL High Definition Audio Controller Digital Stereo (HDMI 2)"
		device.class = "monitor"
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xdf080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "0fb9"
		device.product.name = "GP107GL High Definition Audio Controller"
		device.string = "1"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Formate:
		pcm

Quelle #1
	Status: SUSPENDED
	Name: alsa_input.usb-046d_0825_B975BB10-02.mono-fallback
	Beschreibung: Webcam C270 Mono
	Treiber: module-alsa-card.c
	Abtastwert-Angabe: s16le 1ch 48000Hz
	Kanalzuordnung: mono
	Besitzer-Modul: 7
	Stumm: nein
	Lautstärke: mono: 47841 /  73% / -8,20 dB
	        Verteilung 0,00
	Basis-Lautstärke: 20724 /  32% / -30,00 dB
	Ziel-Monitor: k. A.
	Latenz: 0 usec, eingestellt 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Eigenschaften:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "USB Device 0x46d:0x825"
		alsa.long_card_name = "USB Device 0x46d:0x825 at usb-0000:00:14.0-13, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:13:1.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.2/sound/card2"
		udev.id = "usb-046d_0825_B975BB10-02"
		device.bus = "usb"
		device.vendor.id = "046d"
		device.vendor.name = "Logitech, Inc."
		device.product.id = "0825"
		device.product.name = "Webcam C270"
		device.serial = "046d_0825_B975BB10"
		device.form_factor = "webcam"
		device.string = "hw:2"
		device.buffering.buffer_size = "192000"
		device.buffering.fragment_size = "96000"
		device.access_mode = "mmap+timer"
		device.profile.name = "mono-fallback"
		device.profile.description = "Mono"
		device.description = "Webcam C270 Mono"
		module-udev-detect.discovered = "1"
		device.icon_name = "camera-web-usb"
	Ports:
		analog-input-mic: Microphone (type: Mic, priority: 8700, availability unknown)
	Aktiver Port: analog-input-mic
	Formate:
		pcm

Quelle #2
	Status: SUSPENDED
	Name: alsa_output.pci-0000_00_1f.3.iec958-stereo.monitor
	Beschreibung: Monitor of Internes Audio Digital Stereo (IEC958)
	Treiber: module-alsa-card.c
	Abtastwert-Angabe: s16le 2ch 44100Hz
	Kanalzuordnung: front-left,front-right
	Besitzer-Modul: 8
	Stumm: nein
	Lautstärke: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        Verteilung 0,00
	Basis-Lautstärke: 65536 / 100% / 0,00 dB
	Ziel-Monitor: alsa_output.pci-0000_00_1f.3.iec958-stereo
	Latenz: 0 usec, eingestellt 0 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Eigenschaften:
		device.description = "Monitor of Internes Audio Digital Stereo (IEC958)"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xdf240000 irq 137"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a2f0"
		device.product.name = "200 Series PCH HD Audio"
		device.form_factor = "internal"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Formate:
		pcm

Quelle #5
	Status: SUSPENDED
	Name: alsa_output.usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01.analog-stereo.monitor
	Beschreibung: Monitor of UACDemoV1.0 Analog Stereo
	Treiber: module-alsa-card.c
	Abtastwert-Angabe: s16le 2ch 48000Hz
	Kanalzuordnung: front-left,front-right
	Besitzer-Modul: 29
	Stumm: nein
	Lautstärke: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        Verteilung 0,00
	Basis-Lautstärke: 65536 / 100% / 0,00 dB
	Ziel-Monitor: alsa_output.usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01.analog-stereo
	Latenz: 0 usec, eingestellt 0 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Eigenschaften:
		device.description = "Monitor of UACDemoV1.0 Analog Stereo"
		device.class = "monitor"
		alsa.card = "3"
		alsa.card_name = "UACDemoV1.0"
		alsa.long_card_name = "Jieli Technology UACDemoV1.0 at usb-0000:00:14.0-3.3, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:3.3:1.1"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/sound/card3"
		udev.id = "usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01"
		device.bus = "usb"
		device.vendor.id = "4c4a"
		device.vendor.name = "Jieli Technology"
		device.product.id = "4155"
		device.product.name = "UACDemoV1.0"
		device.serial = "Jieli_Technology_UACDemoV1.0_4542BF943C234C53"
		device.string = "3"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Formate:
		pcm

Client #0
	Treiber: module-systemd-login.c
	Owner-Modul: 22
	Eigenschaften:
		application.name = "Login Session 2"
		systemd-login.session = "2"

Client #1
	Treiber: protocol-native.c
	Owner-Modul: 15
	Eigenschaften:
		application.name = "xfwm4"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.process.id = "1189"
		application.process.user = "myuser"
		application.process.host = "imedv11"
		application.process.binary = "xfwm4"
		application.language = "de_DE.utf8"
		application.process.machine_id = "2cf839ec73924242bcda5fa06d38ae8f"
		application.process.session_id = "2"

Client #2
	Treiber: protocol-native.c
	Owner-Modul: 15
	Eigenschaften:
		application.name = "xfce4-pulseaudio-plugin"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.version = "0.4.3"
		application.id = "org.xfce.pulseaudio-plugin"
		application.icon_name = "multimedia-volume-control"
		application.process.id = "1220"
		application.process.user = "myuser"
		application.process.host = "imedv11"
		application.process.binary = "wrapper-2.0"
		application.language = "de_DE.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "2cf839ec73924242bcda5fa06d38ae8f"
		application.process.session_id = "2"

Client #3
	Treiber: protocol-native.c
	Owner-Modul: 15
	Eigenschaften:
		application.name = "xfce4-pulseaudio-plugin"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.version = "0.4.3"
		application.id = "org.xfce.pulseaudio-plugin"
		application.icon_name = "multimedia-volume-control"
		application.process.id = "1229"
		application.process.user = "myuser"
		application.process.host = "imedv11"
		application.process.binary = "wrapper-2.0"
		application.language = "de_DE.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "2cf839ec73924242bcda5fa06d38ae8f"
		application.process.session_id = "2"

Client #8
	Treiber: protocol-native.c
	Owner-Modul: 15
	Eigenschaften:
		application.name = "pactl"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.process.id = "4077"
		application.process.user = "myuser"
		application.process.host = "imedv11"
		application.process.binary = "pactl"
		application.language = "de_DE.utf8"
		window.x11.display = ":0.0"
		application.process.machine_id = "2cf839ec73924242bcda5fa06d38ae8f"
		application.process.session_id = "2"

Karte #0
	Name: alsa_card.pci-0000_01_00.1
	Treiber: module-alsa-card.c
	Owner-Modul: 6
	Eigenschaften:
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xdf080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "0fb9"
		device.product.name = "GP107GL High Definition Audio Controller"
		device.string = "1"
		device.description = "GP107GL High Definition Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Profile:
		output:hdmi-stereo: Digital Stereo (HDMI)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 5900, verfügbar: nein)
		output:hdmi-surround: Digital Surround 5.1 (HDMI)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 800, verfügbar: nein)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 800, verfügbar: nein)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 38468, verfügbar: ja)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 5700, verfügbar: nein)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 5700, verfügbar: nein)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 5700, verfügbar: nein)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
		output:hdmi-stereo-extra5: Digital Stereo (HDMI 6)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 5700, verfügbar: nein)
		output:hdmi-surround-extra5: Digital Surround 5.1 (HDMI 6)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
		output:hdmi-surround71-extra5: Digital Surround 7.1 (HDMI 6)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
		off: Aus (Ziele: 0, Quellen: 0, Priorität: 0, verfügbar: ja)
	Aktives Profil: output:hdmi-stereo-extra1
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
			Eigenschaften:
				device.icon_name = "video-display"
			Teil der/des Profil(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, available)
			Eigenschaften:
				device.icon_name = "video-display"
				device.product.name = "BenQ GL2450H
"
			Teil der/des Profil(s): output:hdmi-stereo-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
			Eigenschaften:
				device.icon_name = "video-display"
			Teil der/des Profil(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, not available)
			Eigenschaften:
				device.icon_name = "video-display"
			Teil der/des Profil(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
		hdmi-output-4: HDMI / DisplayPort 5 (type: HDMI, priority: 5500, latency offset: 0 usec, not available)
			Eigenschaften:
				device.icon_name = "video-display"
			Teil der/des Profil(s): output:hdmi-stereo-extra4, output:hdmi-surround-extra4, output:hdmi-surround71-extra4
		hdmi-output-5: HDMI / DisplayPort 6 (type: HDMI, priority: 5400, latency offset: 0 usec, not available)
			Eigenschaften:
				device.icon_name = "video-display"
			Teil der/des Profil(s): output:hdmi-stereo-extra5, output:hdmi-surround-extra5, output:hdmi-surround71-extra5

Karte #1
	Name: alsa_card.usb-046d_0825_B975BB10-02
	Treiber: module-alsa-card.c
	Owner-Modul: 7
	Eigenschaften:
		alsa.card = "2"
		alsa.card_name = "USB Device 0x46d:0x825"
		alsa.long_card_name = "USB Device 0x46d:0x825 at usb-0000:00:14.0-13, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:13:1.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.2/sound/card2"
		udev.id = "usb-046d_0825_B975BB10-02"
		device.bus = "usb"
		device.vendor.id = "046d"
		device.vendor.name = "Logitech, Inc."
		device.product.id = "0825"
		device.product.name = "Webcam C270"
		device.serial = "046d_0825_B975BB10"
		device.form_factor = "webcam"
		device.string = "2"
		device.description = "Webcam C270"
		module-udev-detect.discovered = "1"
		device.icon_name = "camera-web-usb"
	Profile:
		input:mono-fallback: Mono-Eingabe (Ziele: 0, Quellen: 1, Priorität: 1, verfügbar: ja)
		off: Aus (Ziele: 0, Quellen: 0, Priorität: 0, verfügbar: ja)
	Aktives Profil: input:mono-fallback
	Ports:
		analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
			Eigenschaften:
				device.icon_name = "audio-input-microphone"
			Teil der/des Profil(s): input:mono-fallback

Karte #2
	Name: alsa_card.pci-0000_00_1f.3
	Treiber: module-alsa-card.c
	Owner-Modul: 8
	Eigenschaften:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xdf240000 irq 137"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a2f0"
		device.product.name = "200 Series PCH HD Audio"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Internes Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Profile:
		input:analog-stereo: Analog Stereo-Eingabe (Ziele: 0, Quellen: 1, Priorität: 65, verfügbar: nein)
		output:analog-stereo: Analog Stereo-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 6500, verfügbar: nein)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (Ziele: 1, Quellen: 1, Priorität: 6565, verfügbar: nein)
		output:analog-surround-21: Analog Surround 2.1-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1300, verfügbar: nein)
		output:analog-surround-21+input:analog-stereo: Analog Surround 2.1-Ausgabe + Analog Stereo-Eingabe (Ziele: 1, Quellen: 1, Priorität: 1365, verfügbar: nein)
		output:analog-surround-40: Analog Surround 4.0-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1200, verfügbar: nein)
		output:analog-surround-40+input:analog-stereo: Analog Surround 4.0-Ausgabe + Analog Stereo-Eingabe (Ziele: 1, Quellen: 1, Priorität: 1265, verfügbar: nein)
		output:analog-surround-41: Analog Surround 4.1-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1300, verfügbar: nein)
		output:analog-surround-41+input:analog-stereo: Analog Surround 4.1-Ausgabe + Analog Stereo-Eingabe (Ziele: 1, Quellen: 1, Priorität: 1365, verfügbar: nein)
		output:analog-surround-50: Analog Surround 5.0-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1200, verfügbar: nein)
		output:analog-surround-50+input:analog-stereo: Analog Surround 5.0-Ausgabe + Analog Stereo-Eingabe (Ziele: 1, Quellen: 1, Priorität: 1265, verfügbar: nein)
		output:analog-surround-51: Analog Surround 5.1-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1300, verfügbar: nein)
		output:analog-surround-51+input:analog-stereo: Analog Surround 5.1-Ausgabe + Analog Stereo-Eingabe (Ziele: 1, Quellen: 1, Priorität: 1365, verfügbar: nein)
		output:iec958-stereo: Digital Stereo (IEC958)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 38268, verfügbar: ja)
		output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958)-Ausgabe + Analog Stereo-Eingabe (Ziele: 1, Quellen: 1, Priorität: 5565, verfügbar: ja)
		off: Aus (Ziele: 0, Quellen: 0, Priorität: 0, verfügbar: ja)
	Aktives Profil: output:iec958-stereo
	Ports:
		analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, not available)
			Eigenschaften:
				device.icon_name = "audio-input-microphone"
			Teil der/des Profil(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
		analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, not available)
			Eigenschaften:
				device.icon_name = "audio-input-microphone"
			Teil der/des Profil(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
		analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, not available)
			Teil der/des Profil(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
		analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, not available)
			Teil der/des Profil(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
		analog-output-headphones: Headphones (type: Kopfhörer, priority: 9900, latency offset: 0 usec, not available)
			Eigenschaften:
				device.icon_name = "audio-headphones"
			Teil der/des Profil(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Teil der/des Profil(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo

Karte #5
	Name: alsa_card.usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01
	Treiber: module-alsa-card.c
	Owner-Modul: 29
	Eigenschaften:
		alsa.card = "3"
		alsa.card_name = "UACDemoV1.0"
		alsa.long_card_name = "Jieli Technology UACDemoV1.0 at usb-0000:00:14.0-3.3, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:3.3:1.1"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/sound/card3"
		udev.id = "usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01"
		device.bus = "usb"
		device.vendor.id = "4c4a"
		device.vendor.name = "Jieli Technology"
		device.product.id = "4155"
		device.product.name = "UACDemoV1.0"
		device.serial = "Jieli_Technology_UACDemoV1.0_4542BF943C234C53"
		device.string = "3"
		device.description = "UACDemoV1.0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Profile:
		output:analog-stereo: Analog Stereo-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 6500, verfügbar: ja)
		output:iec958-stereo: Digital Stereo (IEC958)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 5500, verfügbar: ja)
		off: Aus (Ziele: 0, Quellen: 0, Priorität: 0, verfügbar: ja)
	Aktives Profil: output:analog-stereo
	Ports:
		analog-output: Analog Output (type: Analog, priority: 9900, latency offset: 0 usec, availability unknown)
			Teil der/des Profil(s): output:analog-stereo
		iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Teil der/des Profil(s): output:iec958-stereo

Last edited by MSco (2021-12-03 09:07:53)

Offline

#2 2021-12-01 14:41:47

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,944

Re: [SOLVED] Bluetooth headset connects to bluetooth, but no sound

Remove pulseaudio-modules-bt it's not worked on anymore and most of the functionality should've been integrated in upstream pulseaudio with the 15 release available in the pulseaudio-bluetooth package. The UACDemo is furthermore not a standard bluetooth device, which can be normal, but would make any bluetooth modules irrelevant.

You don't appear to try and play anything in that output, during an actual playback attempt what do you get for 

amixer -c3
LC_ALL=C pacmd list-sinks
LC_ALL=C pacmd list-sink-inputs

Last edited by V1del (2021-12-01 14:47:16)

Offline

#3 2021-12-01 15:39:49

MSco
Member
Registered: 2021-12-01
Posts: 18

Re: [SOLVED] Bluetooth headset connects to bluetooth, but no sound

Thanks for your help. I installed pulseaudio-bluetooth and removed the other package. However, still the same problem. Here are my outputs:

amixer -c3

Simple mixer control 'Mic',0
  Capabilities: cvolume cvolume-joined cswitch cswitch-joined
  Capture channels: Mono
  Limits: Capture 0 - 16
  Mono: Capture 11 [69%] [22.50dB] [on]

LC_ALL=C pacmd list-sinks

3 sink(s) available.
    index: 0
	name: <alsa_output.pci-0000_01_00.1.hdmi-stereo-extra1>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9030
	volume: front-left: 38010 /  58% / -14.19 dB,   front-right: 38010 /  58% / -14.19 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
	card: 0 <alsa_card.pci-0000_01_00.1>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 1"
		alsa.id = "HDMI 1"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "7"
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xdf080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "0fb9"
		device.product.name = "GP107GL High Definition Audio Controller"
		device.string = "hdmi:1,1"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo-extra1"
		device.profile.description = "Digital Stereo (HDMI 2)"
		device.description = "GP107GL High Definition Audio Controller Digital Stereo (HDMI 2)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "BenQ GL2450H
"
	active port: <hdmi-output-1>
    index: 2
	name: <alsa_output.pci-0000_00_1f.3.iec958-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9037
	volume: front-left: 68157 / 104% / 1.02 dB,   front-right: 68157 / 104% / 1.02 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 3
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 3 <alsa_card.pci-0000_00_1f.3>
	module: 9
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC1220 Digital"
		alsa.id = "ALC1220 Digital"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "1"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xdf240000 irq 137"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a2f0"
		device.product.name = "200 Series PCH HD Audio"
		device.form_factor = "internal"
		device.string = "iec958:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "iec958-stereo"
		device.profile.description = "Digital Stereo (IEC958)"
		device.description = "Internes Audio Digital Stereo (IEC958)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <iec958-stereo-output>
  * index: 4
	name: <alsa_output.usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9049
	volume: front-left: 64587 /  99% / -0.38 dB,   front-right: 64587 /  99% / -0.38 dB
	        balance 0.00
	base volume: 64587 /  99% / -0.38 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 5
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 5 <alsa_card.usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01>
	module: 31
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "UACDemoV1.0"
		alsa.long_card_name = "Jieli Technology UACDemoV1.0 at usb-0000:00:14.0-3.3, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:3.3:1.1"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/sound/card2"
		udev.id = "usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01"
		device.bus = "usb"
		device.vendor.id = "4c4a"
		device.vendor.name = "Jieli Technology"
		device.product.id = "4155"
		device.product.name = "UACDemoV1.0"
		device.serial = "Jieli_Technology_UACDemoV1.0_4542BF943C234C53"
		device.string = "front:2"
		device.buffering.buffer_size = "384000"
		device.buffering.fragment_size = "192000"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "UACDemoV1.0 Analog Stereo"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	ports:
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-output>

LC_ALL=C pacmd list-sink-inputs

0 sink input(s) available.

Offline

#4 2021-12-01 16:08:25

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,944

Re: [SOLVED] Bluetooth headset connects to bluetooth, but no sound

You are not trying to play back anything still (list-sink-inputs should show something). What tool/command do you use for testing whether you get any sound? What's your output for 

sudo fuser -v /dev/snd/*
speaker-test -Dhw:2,0 -c2 #Do you get noise from that?
amixer -c2 #The 3 is wrong in your current outputs, change the 2 here and in the command above to whatever is listed under the alsa.card = attribute for the UACDemo sink should this change again between your current and next post

Last edited by V1del (2021-12-01 16:09:28)

Offline

#5 2021-12-01 16:16:04

MSco
Member
Registered: 2021-12-01
Posts: 18

Re: [SOLVED] Bluetooth headset connects to bluetooth, but no sound

Ah, my fault, I am sorry. I forgot to play back ....
I am now playing a youtube video. Here are my outputs again:

amixer -c3:

Simple mixer control 'Mic',0
  Capabilities: cvolume cvolume-joined cswitch cswitch-joined
  Capture channels: Mono
  Limits: Capture 0 - 16
  Mono: Capture 10 [62%] [21.00dB] [on]

amixer -c2

Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 99
  Mono:
  Front Left: Playback 0 [0%] [0.00dB] [on]
  Front Right: Playback 0 [0%] [0.00dB] [on]

LC_ALL=C pacmd list-sinks:

3 sink(s) available.
    index: 2
	name: <alsa_output.pci-0000_00_1f.3.iec958-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9037
	volume: front-left: 68157 / 104% / 1.02 dB,   front-right: 68157 / 104% / 1.02 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 3
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 3 <alsa_card.pci-0000_00_1f.3>
	module: 9
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC1220 Digital"
		alsa.id = "ALC1220 Digital"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "1"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xdf240000 irq 137"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a2f0"
		device.product.name = "200 Series PCH HD Audio"
		device.form_factor = "internal"
		device.string = "iec958:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "iec958-stereo"
		device.profile.description = "Digital Stereo (IEC958)"
		device.description = "Internes Audio Digital Stereo (IEC958)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <iec958-stereo-output>
    index: 5
	name: <alsa_output.pci-0000_01_00.1.hdmi-stereo-extra1>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9030
	volume: front-left: 38010 /  58% / -14.19 dB,   front-right: 38010 /  58% / -14.19 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 6
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
	card: 0 <alsa_card.pci-0000_01_00.1>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 1"
		alsa.id = "HDMI 1"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "7"
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xdf080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "0fb9"
		device.product.name = "GP107GL High Definition Audio Controller"
		device.string = "hdmi:1,1"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo-extra1"
		device.profile.description = "Digital Stereo (HDMI 2)"
		device.description = "GP107GL High Definition Audio Controller Digital Stereo (HDMI 2)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "BenQ GL2450H
"
	active port: <hdmi-output-1>
  * index: 6
	name: <alsa_output.usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9049
	volume: front-left: 64587 /  99% / -0.38 dB,   front-right: 64587 /  99% / -0.38 dB
	        balance 0.00
	base volume: 64587 /  99% / -0.38 dB
	volume steps: 65537
	muted: no
	current latency: 30.23 ms
	max request: 4 KiB
	max rewind: 4 KiB
	monitor source: 7
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	configured latency: 23.22 ms; range is 0.50 .. 2000.00 ms
	card: 6 <alsa_card.usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01>
	module: 33
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "UACDemoV1.0"
		alsa.long_card_name = "Jieli Technology UACDemoV1.0 at usb-0000:00:14.0-3.3, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:3.3:1.1"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/sound/card2"
		udev.id = "usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01"
		device.bus = "usb"
		device.vendor.id = "4c4a"
		device.vendor.name = "Jieli Technology"
		device.product.id = "4155"
		device.product.name = "UACDemoV1.0"
		device.serial = "Jieli_Technology_UACDemoV1.0_4542BF943C234C53"
		device.string = "front:2"
		device.buffering.buffer_size = "384000"
		device.buffering.fragment_size = "192000"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "UACDemoV1.0 Analog Stereo"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	ports:
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-output>

LC_ALL=C pacmd list-sink-inputs:

1 sink input(s) available.
    index: 1
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 6 <alsa_output.usb-Jieli_Technology_UACDemoV1.0_4542BF943C234C53-01.analog-stereo>
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 49.73 ms
	requested latency: 23.22 ms
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	resample method: speex-float-1
	module: 16
	client: 14 <Google Chrome>
	properties:
		application.icon_name = "google-chrome"
		media.name = "Playback"
		application.name = "Google Chrome"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.process.id = "2455"
		application.process.user = "myuser"
		application.process.host = "imedv11"
		application.process.binary = "chrome"
		application.language = "de_DE.utf8"
		window.x11.display = ":0.0"
		application.process.machine_id = "2cf839ec73924242bcda5fa06d38ae8f"
		application.process.session_id = "2"
		module-stream-restore.id = "sink-input-by-application-name:Google Chrome"

fuser -v /dev/snd/*

                     BEN.        PID ZUGR.  BEFEHL
/dev/snd/controlC0:  myuser   1247 F.... pulseaudio
/dev/snd/controlC1:  myuser   1247 F.... pulseaudio
/dev/snd/controlC2:  myuser   1247 F.... pulseaudio
/dev/snd/controlC3:  myuser   1247 F.... pulseaudio
/dev/snd/pcmC2D0p:   myuser   1247 F...m pulseaudio

LC_ALL=C speaker-test -Dhw:2,0 -c2

speaker-test 1.2.5.1

Playback device is hw:2,0
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Playback open error: -16,Device or resource busy

Last edited by MSco (2021-12-01 16:21:02)

Offline

#6 2021-12-01 16:27:38

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,944

Re: [SOLVED] Bluetooth headset connects to bluetooth, but no sound

Your PCM is basically muted on the ALSA side for some reason: 

amixer -c2 set 'PCM',0 100%,100%
#For good measure to make sure it stays that way on subsequent boots
sudo alsactl store

Last edited by V1del (2021-12-01 16:28:59)

Offline

#7 2021-12-03 06:28:10

MSco
Member
Registered: 2021-12-01
Posts: 18

Re: [SOLVED] Bluetooth headset connects to bluetooth, but no sound

@V1del
Thank you very much! It worked for me. Not exactly your command, but when I type
`amixer -c3 set 'PCM',0 100%,100%`, I got sound, finally.

However, in the pulseaudio configuration tool, I can only choose "Analog Stereo" to get sound. When I choose "Digital Stereo (IEC958)", I get no sound.
Is this correct or is there another problem, which could be solved?

Last edited by MSco (2021-12-03 06:46:56)

Offline

#8 2021-12-03 08:54:21

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,944

Re: [SOLVED] Bluetooth headset connects to bluetooth, but no sound

Yes as mentioned the "-c3" depends on what index your card has which can change on any boot/plug in of the device, double check with aplay -l. When I made the post it was 2

That's likely normal. Does this receiver have some other jack you could plug or so? But often things just announce something that they can't actually provide, as long as one of them works that should be fine.

If this is [SOLVED] please mark it as such by editing the title in your first post.

Offline

Pages: 1

Board footer

Powered by FluxBB