You are not logged in.
- Topics: Active | Unanswered
#1 2021-12-13 05:40:40
- Californian
- Member
- Registered: 2014-03-05
- Posts: 33
Speaker not working and mic not found after switch to wireplumber
Since wireplumber is now recommended, I decided to switch to it. I was having problems with pipewire-media-session needing to be restarted after every standby anyway, so I figured this might alleviate the need to deal with that issue.
Unfortunately, now none of my sound devices work, except bluetooth A2DP (non-headset; headset gives me garbled noise on both mSBC and CVSD codecs).
I went through the wiki page for pipewire multiple times and reset my configuration to all the defaults.
Specifically, I reinstalled all of pipewire, pipewire-pulse, pipewire-alsa, and wireguard. I also ensured pulseaudio, pulseaudio-alsa, and pulseaudio-bluetooth were all removed. I confirmed that
pactl infoincluded
Server Name: PulseAudio (on PipeWire 0.3.40)in its output.
I also removed everything in /etc/pipewire and ran
sudo cp -r /usr/share/pipewire/ /etc/ . I also removed everything in ~/.config/pipewire.
After all of that, I restarted my computer and verified that pipewire.service is "active (running)" and no errors look present there, however systemctl --user status wireplumber has several:
Dec 12 22:17:49 red wireplumber[2006]: Failed to register battery provider. Error: org.freedesktop.DBus.Error.UnknownMethod
Dec 12 22:17:49 red wireplumber[2006]: BlueZ Battery Provider is not available, won't retry to register it. Make sure you are running BlueZ 5.56+ with experimental features to use Battery Provider.
Dec 12 22:19:58 red wireplumber[2006]: unknown AT+IPHONEACCEV key:2 value:0
Dec 12 22:20:03 red wireplumber[2006]: unknown AT+IPHONEACCEV key:2 value:0
Dec 12 22:20:40 red wireplumber[2006]: set volume 94 failed for transport /org/bluez/hci0/dev_20_74_CF_D6_C8_39/sep1/fd2 (No such property 'Volume')
Dec 12 22:20:55 red wireplumber[2006]: set volume 94 failed for transport /org/bluez/hci0/dev_20_74_CF_D6_C8_39/sep1/fd3 (No such property 'Volume')
Dec 12 22:23:14 red wireplumber[2006]: <WpDefaultProfile:0x5591b7d15b60> failed to get current profile on device: pipewire proxy destroyed before finishingIf I restart wireplumber, those errors are no longer present, but the audio situation remains the same.
aplay -l lists all my desired devices, but pw-record --list-targets only lists a single "analog" input which has never actually been usable for input.
journalctl --user -u pipewire --user -u pipewire-media-session --user -u pipewire-pulse -f gives:
Dec 12 22:10:06 red systemd[1860]: Started PipeWire Multimedia Service.
Dec 12 22:10:06 red systemd[1860]: Started PipeWire PulseAudio.
Dec 12 22:19:49 red pipewire-pulse[2007]: mod.protocol-pulse: 0x562d2e9c22d0: card 77 port 0 profiles inconsistent (1 < 3)
Dec 12 22:19:49 red pipewire-pulse[2007]: mod.protocol-pulse: 0x562d2e9c22d0: card 77 port 1 profiles inconsistent (1 < 3)
Dec 12 22:19:49 red pipewire-pulse[2007]: mod.protocol-pulse: 0x562d2e9c22d0: card 77 port 0 profiles inconsistent (1 < 3)
Dec 12 22:19:49 red pipewire-pulse[2007]: mod.protocol-pulse: 0x562d2e9c22d0: card 77 port 1 profiles inconsistent (1 < 3)
Dec 12 22:19:49 red pipewire-pulse[2007]: mod.protocol-pulse: 0x562d2e9c22d0: card 77 port 0 profiles inconsistent (1 < 3)
Dec 12 22:19:49 red pipewire-pulse[2007]: mod.protocol-pulse: 0x562d2e9c22d0: card 77 port 1 profiles inconsistent (1 < 3)How should I go about debugging this?
Last edited by Californian (2021-12-13 05:56:05)
Offline
#2 2021-12-13 08:32:43
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,944
Re: Speaker not working and mic not found after switch to wireplumber
What's your
pactl list cardsduring this?
Offline
#3 2021-12-13 19:21:56
- Californian
- Member
- Registered: 2014-03-05
- Posts: 33
Re: Speaker not working and mic not found after switch to wireplumber
Card #45
Name: alsa_card.pci-0000_01_00.1
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.card.longname = "HDA NVidia at 0x73000000 irq 17"
api.alsa.card.name = "HDA NVidia"
api.alsa.path = "hw:1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:01:00.1"
device.description = "TU106 High Definition Audio Controller"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_01_00.1"
device.nick = "HDA NVidia"
device.plugged.usec = "3815236"
device.product.id = "4345"
device.product.name = "TU106 High Definition Audio Controller"
device.subsystem = "sound"
device.sysfs.path = "/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.vendor.id = "4318"
device.vendor.name = "NVIDIA Corporation"
media.class = "Audio/Device"
factory.id = "14"
client.id = "32"
object.id = "45"
object.path = "alsa:pcm:1"
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0x73000000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.string = "1"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra6: Digital Stereo (HDMI 7) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra5: Digital Surround 5.1 (HDMI 6) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra5: Digital Surround 7.1 (HDMI 6) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra6: Digital Surround 5.1 (HDMI 7) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra6: Digital Surround 7.1 (HDMI 7) Output (sinks: 1, sources: 0, priority: 600, available: no)
pro-audio: Pro Audio (sinks: 7, sources: 0, priority: 1, available: yes)
Active Profile: output:hdmi-stereo
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 1"
device.icon_name = "video-display"
card.profile.port = "0"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 2"
device.icon_name = "video-display"
card.profile.port = "1"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 3"
device.icon_name = "video-display"
card.profile.port = "2"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
card.profile.port = "3"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
hdmi-output-4: HDMI / DisplayPort 5 (type: HDMI, priority: 5500, latency offset: 0 usec, availability group: Legacy 5, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 5"
device.icon_name = "video-display"
card.profile.port = "4"
Part of profile(s): output:hdmi-stereo-extra4, output:hdmi-surround-extra4, output:hdmi-surround71-extra4
hdmi-output-5: HDMI / DisplayPort 6 (type: HDMI, priority: 5400, latency offset: 0 usec, availability group: Legacy 6, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 6"
device.icon_name = "video-display"
card.profile.port = "5"
Part of profile(s): output:hdmi-stereo-extra5, output:hdmi-surround-extra5, output:hdmi-surround71-extra5
hdmi-output-6: HDMI / DisplayPort 7 (type: HDMI, priority: 5300, latency offset: 0 usec, availability group: Legacy 7, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 7"
device.icon_name = "video-display"
card.profile.port = "6"
Part of profile(s): output:hdmi-stereo-extra6, output:hdmi-surround-extra6, output:hdmi-surround71-extra6
Card #46
Name: alsa_card.pci-0000_00_1f.3-platform-sof_sdw
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "2"
api.alsa.card.longname = "Intel Soundwire SOF"
api.alsa.card.name = "sof-soundwire"
api.alsa.path = "hw:2"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio2"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3-platform-sof_sdw"
device.description = "Comet Lake PCH cAVS"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_1f.3-platform-sof_sdw"
device.nick = "sof-soundwire"
device.plugged.usec = "4877439"
device.product.id = "1736"
device.product.name = "Comet Lake PCH cAVS"
device.subsystem = "sound"
device.sysfs.path = "/sys/devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card2"
device.vendor.id = "32902"
device.vendor.name = "Intel Corporation"
media.class = "Audio/Device"
factory.id = "14"
client.id = "32"
object.id = "46"
object.path = "alsa:pcm:2"
alsa.card = "2"
alsa.card_name = "sof-soundwire"
alsa.long_card_name = "Intel Soundwire SOF"
alsa.driver_name = "snd_soc_sof_sdw"
device.string = "2"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:stereo-fallback: Stereo Output (sinks: 1, sources: 0, priority: 5100, available: yes)
pro-audio: Pro Audio (sinks: 5, sources: 2, priority: 1, available: yes)
Active Profile: output:stereo-fallback
Ports:
analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability unknown)
Properties:
port.type = "speaker"
device.icon_name = "audio-speakers"
card.profile.port = "0"
Part of profile(s): output:stereo-fallback
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "headphones"
port.availability-group = "Legacy 1"
device.icon_name = "audio-headphones"
card.profile.port = "1"
Part of profile(s): output:stereo-fallback
Card #47
Name: alsa_card.platform-snd_aloop.0
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.card.longname = "Loopback 1"
api.alsa.card.name = "Loopback"
api.alsa.path = "hw:0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.api = "alsa"
device.bus_path = "platform-snd_aloop.0"
device.description = "Built-in Audio"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog"
device.name = "alsa_card.platform-snd_aloop.0"
device.nick = "Loopback"
device.plugged.usec = "2875974"
device.subsystem = "sound"
device.sysfs.path = "/sys/devices/platform/snd_aloop.0/sound/card0"
media.class = "Audio/Device"
factory.id = "14"
client.id = "32"
object.id = "47"
object.path = "alsa:pcm:0"
alsa.card = "0"
alsa.card_name = "Loopback"
alsa.long_card_name = "Loopback 1"
alsa.driver_name = "snd_aloop"
device.string = "0"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
output:analog-stereo+input:analog-surround-21: Analog Stereo Output + Analog Surround 2.1 Input (sinks: 1, sources: 1, priority: 6513, available: yes)
output:analog-stereo+input:analog-surround-41: Analog Stereo Output + Analog Surround 4.1 Input (sinks: 1, sources: 1, priority: 6513, available: yes)
output:analog-stereo+input:analog-surround-51: Analog Stereo Output + Analog Surround 5.1 Input (sinks: 1, sources: 1, priority: 6513, available: yes)
output:analog-stereo+input:analog-surround-40: Analog Stereo Output + Analog Surround 4.0 Input (sinks: 1, sources: 1, priority: 6512, available: yes)
output:analog-stereo+input:analog-surround-50: Analog Stereo Output + Analog Surround 5.0 Input (sinks: 1, sources: 1, priority: 6512, available: yes)
output:analog-stereo+input:analog-surround-71: Analog Stereo Output + Analog Surround 7.1 Input (sinks: 1, sources: 1, priority: 6512, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
output:analog-surround-21+input:analog-surround-21: Analog Surround 2.1 Output + Analog Surround 2.1 Input (sinks: 1, sources: 1, priority: 1313, available: yes)
output:analog-surround-21+input:analog-surround-41: Analog Surround 2.1 Output + Analog Surround 4.1 Input (sinks: 1, sources: 1, priority: 1313, available: yes)
output:analog-surround-21+input:analog-surround-51: Analog Surround 2.1 Output + Analog Surround 5.1 Input (sinks: 1, sources: 1, priority: 1313, available: yes)
output:analog-surround-41+input:analog-surround-21: Analog Surround 4.1 Output + Analog Surround 2.1 Input (sinks: 1, sources: 1, priority: 1313, available: yes)
output:analog-surround-41+input:analog-surround-41: Analog Surround 4.1 Output + Analog Surround 4.1 Input (sinks: 1, sources: 1, priority: 1313, available: yes)
output:analog-surround-41+input:analog-surround-51: Analog Surround 4.1 Output + Analog Surround 5.1 Input (sinks: 1, sources: 1, priority: 1313, available: yes)
output:analog-surround-51+input:analog-surround-21: Analog Surround 5.1 Output + Analog Surround 2.1 Input (sinks: 1, sources: 1, priority: 1313, available: yes)
output:analog-surround-51+input:analog-surround-41: Analog Surround 5.1 Output + Analog Surround 4.1 Input (sinks: 1, sources: 1, priority: 1313, available: yes)
output:analog-surround-51+input:analog-surround-51: Analog Surround 5.1 Output + Analog Surround 5.1 Input (sinks: 1, sources: 1, priority: 1313, available: yes)
output:analog-surround-21+input:analog-surround-40: Analog Surround 2.1 Output + Analog Surround 4.0 Input (sinks: 1, sources: 1, priority: 1312, available: yes)
output:analog-surround-21+input:analog-surround-50: Analog Surround 2.1 Output + Analog Surround 5.0 Input (sinks: 1, sources: 1, priority: 1312, available: yes)
output:analog-surround-21+input:analog-surround-71: Analog Surround 2.1 Output + Analog Surround 7.1 Input (sinks: 1, sources: 1, priority: 1312, available: yes)
output:analog-surround-41+input:analog-surround-40: Analog Surround 4.1 Output + Analog Surround 4.0 Input (sinks: 1, sources: 1, priority: 1312, available: yes)
output:analog-surround-41+input:analog-surround-50: Analog Surround 4.1 Output + Analog Surround 5.0 Input (sinks: 1, sources: 1, priority: 1312, available: yes)
output:analog-surround-41+input:analog-surround-71: Analog Surround 4.1 Output + Analog Surround 7.1 Input (sinks: 1, sources: 1, priority: 1312, available: yes)
output:analog-surround-51+input:analog-surround-40: Analog Surround 5.1 Output + Analog Surround 4.0 Input (sinks: 1, sources: 1, priority: 1312, available: yes)
output:analog-surround-51+input:analog-surround-50: Analog Surround 5.1 Output + Analog Surround 5.0 Input (sinks: 1, sources: 1, priority: 1312, available: yes)
output:analog-surround-51+input:analog-surround-71: Analog Surround 5.1 Output + Analog Surround 7.1 Input (sinks: 1, sources: 1, priority: 1312, available: yes)
output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: yes)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: yes)
output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: yes)
output:analog-surround-40+input:analog-surround-21: Analog Surround 4.0 Output + Analog Surround 2.1 Input (sinks: 1, sources: 1, priority: 1213, available: yes)
output:analog-surround-40+input:analog-surround-41: Analog Surround 4.0 Output + Analog Surround 4.1 Input (sinks: 1, sources: 1, priority: 1213, available: yes)
output:analog-surround-40+input:analog-surround-51: Analog Surround 4.0 Output + Analog Surround 5.1 Input (sinks: 1, sources: 1, priority: 1213, available: yes)
output:analog-surround-50+input:analog-surround-21: Analog Surround 5.0 Output + Analog Surround 2.1 Input (sinks: 1, sources: 1, priority: 1213, available: yes)
output:analog-surround-50+input:analog-surround-41: Analog Surround 5.0 Output + Analog Surround 4.1 Input (sinks: 1, sources: 1, priority: 1213, available: yes)
output:analog-surround-50+input:analog-surround-51: Analog Surround 5.0 Output + Analog Surround 5.1 Input (sinks: 1, sources: 1, priority: 1213, available: yes)
output:analog-surround-71+input:analog-surround-21: Analog Surround 7.1 Output + Analog Surround 2.1 Input (sinks: 1, sources: 1, priority: 1213, available: yes)
output:analog-surround-71+input:analog-surround-41: Analog Surround 7.1 Output + Analog Surround 4.1 Input (sinks: 1, sources: 1, priority: 1213, available: yes)
output:analog-surround-71+input:analog-surround-51: Analog Surround 7.1 Output + Analog Surround 5.1 Input (sinks: 1, sources: 1, priority: 1213, available: yes)
output:analog-surround-40+input:analog-surround-40: Analog Surround 4.0 Output + Analog Surround 4.0 Input (sinks: 1, sources: 1, priority: 1212, available: yes)
output:analog-surround-40+input:analog-surround-50: Analog Surround 4.0 Output + Analog Surround 5.0 Input (sinks: 1, sources: 1, priority: 1212, available: yes)
output:analog-surround-40+input:analog-surround-71: Analog Surround 4.0 Output + Analog Surround 7.1 Input (sinks: 1, sources: 1, priority: 1212, available: yes)
output:analog-surround-50+input:analog-surround-40: Analog Surround 5.0 Output + Analog Surround 4.0 Input (sinks: 1, sources: 1, priority: 1212, available: yes)
output:analog-surround-50+input:analog-surround-50: Analog Surround 5.0 Output + Analog Surround 5.0 Input (sinks: 1, sources: 1, priority: 1212, available: yes)
output:analog-surround-50+input:analog-surround-71: Analog Surround 5.0 Output + Analog Surround 7.1 Input (sinks: 1, sources: 1, priority: 1212, available: yes)
output:analog-surround-71+input:analog-surround-40: Analog Surround 7.1 Output + Analog Surround 4.0 Input (sinks: 1, sources: 1, priority: 1212, available: yes)
output:analog-surround-71+input:analog-surround-50: Analog Surround 7.1 Output + Analog Surround 5.0 Input (sinks: 1, sources: 1, priority: 1212, available: yes)
output:analog-surround-71+input:analog-surround-71: Analog Surround 7.1 Output + Analog Surround 7.1 Input (sinks: 1, sources: 1, priority: 1212, available: yes)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
output:analog-surround-71: Analog Surround 7.1 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
input:analog-surround-21: Analog Surround 2.1 Input (sinks: 0, sources: 1, priority: 13, available: yes)
input:analog-surround-41: Analog Surround 4.1 Input (sinks: 0, sources: 1, priority: 13, available: yes)
input:analog-surround-51: Analog Surround 5.1 Input (sinks: 0, sources: 1, priority: 13, available: yes)
input:analog-surround-40: Analog Surround 4.0 Input (sinks: 0, sources: 1, priority: 12, available: yes)
input:analog-surround-50: Analog Surround 5.0 Input (sinks: 0, sources: 1, priority: 12, available: yes)
input:analog-surround-71: Analog Surround 7.1 Input (sinks: 0, sources: 1, priority: 12, available: yes)
pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input: Analog Input (type: Analog, priority: 10000, latency offset: 0 usec, availability unknown)
Properties:
port.type = "analog"
card.profile.port = "0"
Part of profile(s): input:analog-stereo, input:analog-surround-21, input:analog-surround-40, input:analog-surround-41, input:analog-surround-50, input:analog-surround-51, input:analog-surround-71, output:analog-stereo+input:analog-stereo, output:analog-stereo+input:analog-surround-21, output:analog-stereo+input:analog-surround-40, output:analog-stereo+input:analog-surround-41, output:analog-stereo+input:analog-surround-50, output:analog-stereo+input:analog-surround-51, output:analog-stereo+input:analog-surround-71, output:analog-surround-21+input:analog-stereo, output:analog-surround-21+input:analog-surround-21, output:analog-surround-21+input:analog-surround-40, output:analog-surround-21+input:analog-surround-41, output:analog-surround-21+input:analog-surround-50, output:analog-surround-21+input:analog-surround-51, output:analog-surround-21+input:analog-surround-71, output:analog-surround-40+input:analog-stereo, output:analog-surround-40+input:analog-surround-21, output:analog-surround-40+input:analog-surround-40, output:analog-surround-40+input:analog-surround-41, output:analog-surround-40+input:analog-surround-50, output:analog-surround-40+input:analog-surround-51, output:analog-surround-40+input:analog-surround-71, output:analog-surround-41+input:analog-stereo, output:analog-surround-41+input:analog-surround-21, output:analog-surround-41+input:analog-surround-40, output:analog-surround-41+input:analog-surround-41, output:analog-surround-41+input:analog-surround-50, output:analog-surround-41+input:analog-surround-51, output:analog-surround-41+input:analog-surround-71, output:analog-surround-50+input:analog-stereo, output:analog-surround-50+input:analog-surround-21, output:analog-surround-50+input:analog-surround-40, output:analog-surround-50+input:analog-surround-41, output:analog-surround-50+input:analog-surround-50, output:analog-surround-50+input:analog-surround-51, output:analog-surround-50+input:analog-surround-71, output:analog-surround-51+input:analog-stereo, output:analog-surround-51+input:analog-surround-21, output:analog-surround-51+input:analog-surround-40, output:analog-surround-51+input:analog-surround-41, output:analog-surround-51+input:analog-surround-50, output:analog-surround-51+input:analog-surround-51, output:analog-surround-51+input:analog-surround-71, output:analog-surround-71+input:analog-stereo, output:analog-surround-71+input:analog-surround-21, output:analog-surround-71+input:analog-surround-40, output:analog-surround-71+input:analog-surround-41, output:analog-surround-71+input:analog-surround-50, output:analog-surround-71+input:analog-surround-51, output:analog-surround-71+input:analog-surround-71
analog-output: Analog Output (type: Analog, priority: 9900, latency offset: 0 usec, availability unknown)
Properties:
port.type = "analog"
card.profile.port = "1"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-stereo+input:analog-surround-21, output:analog-stereo+input:analog-surround-40, output:analog-stereo+input:analog-surround-41, output:analog-stereo+input:analog-surround-50, output:analog-stereo+input:analog-surround-51, output:analog-stereo+input:analog-surround-71, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-21+input:analog-surround-21, output:analog-surround-21+input:analog-surround-40, output:analog-surround-21+input:analog-surround-41, output:analog-surround-21+input:analog-surround-50, output:analog-surround-21+input:analog-surround-51, output:analog-surround-21+input:analog-surround-71, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-40+input:analog-surround-21, output:analog-surround-40+input:analog-surround-40, output:analog-surround-40+input:analog-surround-41, output:analog-surround-40+input:analog-surround-50, output:analog-surround-40+input:analog-surround-51, output:analog-surround-40+input:analog-surround-71, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-41+input:analog-surround-21, output:analog-surround-41+input:analog-surround-40, output:analog-surround-41+input:analog-surround-41, output:analog-surround-41+input:analog-surround-50, output:analog-surround-41+input:analog-surround-51, output:analog-surround-41+input:analog-surround-71, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-50+input:analog-surround-21, output:analog-surround-50+input:analog-surround-40, output:analog-surround-50+input:analog-surround-41, output:analog-surround-50+input:analog-surround-50, output:analog-surround-50+input:analog-surround-51, output:analog-surround-50+input:analog-surround-71, output:analog-surround-51, output:analog-surround-51+input:analog-stereo, output:analog-surround-51+input:analog-surround-21, output:analog-surround-51+input:analog-surround-40, output:analog-surround-51+input:analog-surround-41, output:analog-surround-51+input:analog-surround-50, output:analog-surround-51+input:analog-surround-51, output:analog-surround-51+input:analog-surround-71, output:analog-surround-71, output:analog-surround-71+input:analog-stereo, output:analog-surround-71+input:analog-surround-21, output:analog-surround-71+input:analog-surround-40, output:analog-surround-71+input:analog-surround-41, output:analog-surround-71+input:analog-surround-50, output:analog-surround-71+input:analog-surround-51, output:analog-surround-71+input:analog-surround-71Offline
#4 2021-12-13 19:40:33
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,944
Re: Speaker not working and mic not found after switch to wireplumber
And playing to that analog-speaker-output doesn't work?
pactl list sinks
pactl list sink-inputsduring an active playback attempt?
Offline
#5 2021-12-13 20:54:51
- Californian
- Member
- Registered: 2014-03-05
- Posts: 33
Re: Speaker not working and mic not found after switch to wireplumber
Correct, that analog speaker output has never worked, even when I was using pipewire-media-session (or really at any time) -- it's not the headphone jack either because that shows up as "Headphones".
~ pactl list sinks ch@p-c
Sink #65
State: RUNNING
Name: alsa_output.pci-0000_00_1f.3-platform-sof_sdw.stereo-fallback
Description: Comet Lake PCH cAVS Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 48287 / 74% / -7.96 dB, front-right: 48287 / 74% / -7.96 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1f.3-platform-sof_sdw.stereo-fallback.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "2"
alsa.card_name = "sof-soundwire"
alsa.class = "generic"
alsa.device = "0"
alsa.driver_name = "snd_soc_sof_sdw"
alsa.id = "Jack Out (*)"
alsa.long_card_name = "Intel Soundwire SOF"
alsa.name = ""
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "Intel Soundwire SOF"
api.alsa.card.name = "sof-soundwire"
api.alsa.path = "hw:2"
api.alsa.pcm.card = "2"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "7"
device.api = "alsa"
device.class = "sound"
device.id = "64"
device.profile.description = "Stereo"
device.profile.name = "stereo-fallback"
device.routes = "2"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Comet Lake PCH cAVS Stereo"
node.name = "alsa_output.pci-0000_00_1f.3-platform-sof_sdw.stereo-fallback"
node.nick = "sof-soundwire"
node.pause-on-idle = "false"
object.path = "alsa:pcm:2:hw:2:playback"
priority.driver = "1000"
priority.session = "1000"
factory.id = "18"
client.id = "32"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "65"
node.max-latency = "2048/48000"
Ports:
analog-output-speaker: Speakers (type: Speaker, priority: 10000, availability unknown)
analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability group: Legacy 1, not available)
Active Port: analog-output-speaker
Formats:
pcm
Sink #67
State: SUSPENDED
Name: alsa_output.pci-0000_01_00.1.hdmi-stereo
Description: TU106 High Definition Audio Controller Digital Stereo (HDMI)
Driver: PipeWire
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.class = "generic"
alsa.device = "3"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 0"
alsa.long_card_name = "HDA NVidia at 0x73000000 irq 17"
alsa.name = "HDMI 0"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA NVidia at 0x73000000 irq 17"
api.alsa.card.name = "HDA NVidia"
api.alsa.path = "hdmi:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "7"
device.api = "alsa"
device.class = "sound"
device.id = "54"
device.profile.description = "Digital Stereo (HDMI)"
device.profile.name = "hdmi-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "TU106 High Definition Audio Controller Digital Stereo (HDMI)"
node.name = "alsa_output.pci-0000_01_00.1.hdmi-stereo"
node.nick = "HDA NVidia"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:hdmi:1:playback"
priority.driver = "696"
priority.session = "696"
factory.id = "18"
client.id = "32"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "67"
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, not available)
Active Port: hdmi-output-0
Formats:
pcm
Sink #42
State: SUSPENDED
Name: alsa_output.platform-snd_aloop.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 48287 / 74% / -7.96 dB, front-right: 0 / 0% / -inf dB
balance -1.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.platform-snd_aloop.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "Loopback"
alsa.class = "generic"
alsa.device = "0"
alsa.driver_name = "snd_aloop"
alsa.id = "Loopback PCM"
alsa.long_card_name = "Loopback 1"
alsa.name = "Loopback PCM"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "Loopback 1"
api.alsa.card.name = "Loopback"
api.alsa.path = "front:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "11"
device.api = "alsa"
device.class = "sound"
device.id = "57"
device.profile.description = "Analog Stereo"
device.profile.name = "analog-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Built-in Audio Analog Stereo"
node.name = "alsa_output.platform-snd_aloop.0.analog-stereo"
node.nick = "Loopback"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:front:0:playback"
priority.driver = "1009"
priority.session = "1009"
factory.id = "18"
client.id = "32"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "42"
Ports:
analog-output: Analog Output (type: Analog, priority: 9900, availability unknown)
Active Port: analog-output
Formats:
pcm~ pactl list sink-inputs ch@p-c
Sink Input #74
Driver: PipeWire
Owner Module: n/a
Client: 81
Sink: 65
Sample Specification: float32le 2ch 48000Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Sink Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Google Chrome"
application.process.id = "3732"
application.process.user = "chicago-maximum"
application.process.host = "prime-classic"
application.process.binary = "chrome"
application.language = "en_DK.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "3f3855c47d074be4b48fcdee235d056c"
application.icon_name = "google-chrome"
media.name = "Playback"
node.rate = "1/48000"
stream.is-live = "true"
node.name = "Google Chrome"
node.autoconnect = "true"
media.class = "Stream/Output/Audio"
adapt.follower.node = ""
object.register = "false"
factory.id = "6"
audio.adapt.follower = ""
factory.mode = "split"
library.name = "audioconvert/libspa-audioconvert"
client.id = "81"
object.id = "74"
node.latency = "1024/48000"
pulse.attr.maxlength = "4194304"
pulse.attr.tlength = "16384"
pulse.attr.prebuf = "12296"
pulse.attr.minreq = "4096"
module-stream-restore.id = "sink-input-by-application-name:Google Chrome"Offline
#6 2021-12-13 20:55:33
- Californian
- Member
- Registered: 2014-03-05
- Posts: 33
Re: Speaker not working and mic not found after switch to wireplumber
I should note: the "Speaker" device is the same one that used to work for the built-in speaker before wireplumber.
Offline
#7 2021-12-14 17:27:29
- Californian
- Member
- Registered: 2014-03-05
- Posts: 33
Re: Speaker not working and mic not found after switch to wireplumber
Oh one more important detail: I'm using an XPS 9700. I'm going to try following this, since my "soundwire" folder says 1.3.0 and this one is 1.4.0 (it's annoying that there's no info anywhere I can find about "soundwire", since it's obviously not the audio streaming package but rather something completely different): https://blog.fts.scot/2020/07/04/dell-x … -on-linux/
Offline