[SOLVED]Problem in using optimus manager and blender?

nahush · 2022-01-12 18:38:58

hello friends,

i am trying to use optimus manager and blender. but get problem . when i do simple task in blender like scaling object etc. the computer shut down ,goes blank. i thought i should use optimus manager for changing the gpu rendering as i have nvidia card in built in. but changing settings doesnt switch it.

any help will be appreciated.

after changing to hybrid

[musicarch@musicArch ~]$ optimus-manager --print-mode
ERROR: the latest GPU setup attempt failed at Xorg pre-start hook.
Log at /var/log/optimus-manager/switch/switch-20220113T000951.log
Cannot execute command because of previous errors.

Log at /var/log/optimus-manager/switch/switch-20220113T000951.log

[18] INFO: # Xorg pre-start hook
[18] INFO: Previous state was: {'type': 'pending_pre_xorg_start', 'requested_mode': 'nvidia', 'current_mode': 'integrated'}
[18] INFO: Requested mode is: nvidia
[146] INFO: Available modules: ['nouveau', 'nvidia', 'nvidia_drm', 'nvidia_modeset', 'nvidia_uvm']
[146] INFO: Unloading modules ['nouveau'] (if loaded)
[149] INFO: switching=none, nothing to do
[195] INFO: Loading module nvidia
[358] ERROR: Xorg pre-start setup error
Traceback (most recent call last):
  File "/usr/lib/python3.10/site-packages/optimus_manager/kernel.py", line 245, in _load_module
    subprocess.check_call(
  File "/usr/lib/python3.10/subprocess.py", line 369, in check_call
    raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command 'modprobe nvidia NVreg_UsePageAttributeTable=1' returned non-zero exit status 1.

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/usr/lib/python3.10/site-packages/optimus_manager/hooks/pre_xorg_start.py", line 51, in main
    setup_kernel_state(config, prev_state, requested_mode)
  File "/usr/lib/python3.10/site-packages/optimus_manager/kernel.py", line 22, in setup_kernel_state
    _nvidia_up(config, hybrid=(requested_mode == "hybrid"))
  File "/usr/lib/python3.10/site-packages/optimus_manager/kernel.py", line 95, in _nvidia_up
    _load_nvidia_modules(config, available_modules)
  File "/usr/lib/python3.10/site-packages/optimus_manager/kernel.py", line 164, in _load_nvidia_modules
    _load_module(available_modules, "nvidia", options=nvidia_options)
  File "/usr/lib/python3.10/site-packages/optimus_manager/kernel.py", line 249, in _load_module
    raise KernelSetupError(f"Error running modprobe for {module}: {e.stderr}") from e
optimus_manager.kernel.KernelSetupError: Error running modprobe for nvidia: None
[360] INFO: Removing /etc/X11/xorg.conf.d/10-optimus-manager.conf (if present)
[360] INFO: Writing state {'type': 'pre_xorg_start_failed', 'switch_id': '20220113T001559', 'requested_mode': 'nvidia'}

Last edited by nahush (2022-01-13 15:17:18)

seth · 2022-01-12 21:21:35

the computer shut down, goes blank.

Which one is it? If the system actually shuts down, you're facing an overheating or undercurrent situation. Otherwise the display server might be crashing.

i thought i should use optimus manager

There've recently been a couple of threads that seem to indicate that optimus manager might have issues w/ the 1.21 server - and it's not required either.
Remove optimus-manager and post the xorg log, you can try prime-run from the nvidia-prime package to offload blender to the GPU

nahush · 2022-01-13 07:46:57

the computer shut down, goes blank.
Which one is it? If the system actually shuts down, you're facing an overheating or undercurrent situation. Otherwise the display server might be crashing.

its is suddenly going off (Shutting down) and sometimes restarting . i think as you suggest that might be temp problem as fan of w530 goes so fast that it makes rattling sound.do help me in this how can know tings regarding temp of CPU

i thought i should use optimus manager
There've recently been a couple of threads that seem to indicate that optimus manager might have issues w/ the 1.21 server - and it's not required either.
Remove optimus-manager and post the xorg log, you can try prime-run from the nvidia-prime package to offload blender to the GPU

i will check this out now as i wasnt aware of any other thing than optimus- mnager and its qt systray application. if i will ask you if need help in this.

Xorg.0.log after removing optimus-manager and optimus-manager-qt

[    20.421] 
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[    20.421] Current Operating System: Linux musicArch 5.15.13-arch1-1 #1 SMP PREEMPT Wed, 05 Jan 2022 16:20:59 +0000 x86_64
[    20.421] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2b8d693d-b2b2-4332-9c5c-298d2abd960f rw loglevel=3 quiet
[    20.421]  
[    20.421] Current version of pixman: 0.40.0
[    20.421] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    20.421] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.421] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 13 12:47:03 2022
[    20.886] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    21.064] (==) No Layout section.  Using the first Screen section.
[    21.064] (==) No screen section available. Using defaults.
[    21.064] (**) |-->Screen "Default Screen Section" (0)
[    21.064] (**) |   |-->Monitor "<default monitor>"
[    21.065] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    21.065] (==) Automatically adding devices
[    21.065] (==) Automatically enabling devices
[    21.065] (==) Automatically adding GPU devices
[    21.065] (==) Automatically binding GPU devices
[    21.065] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    21.524] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    21.524] 	Entry deleted from font path.
[    21.524] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    21.524] 	Entry deleted from font path.
[    21.524] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    21.524] 	Entry deleted from font path.
[    21.525] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF
[    21.525] (==) ModulePath set to "/usr/lib/xorg/modules"
[    21.525] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    21.525] (II) Module ABI versions:
[    21.525] 	X.Org ANSI C Emulation: 0.4
[    21.525] 	X.Org Video Driver: 25.2
[    21.525] 	X.Org XInput driver : 24.4
[    21.525] 	X.Org Server Extension : 10.0
[    21.526] (++) using VT number 7

[    21.526] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    21.528] (II) xfree86: Adding drm device (/dev/dri/card0)
[    21.528] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    21.544] (--) PCI:*(0@0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[    21.544] (--) PCI: (1@0:0:0) 10de:0ffc:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[    21.545] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    21.545] (II) LoadModule: "glx"
[    21.723] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    22.110] (II) Module glx: vendor="X.Org Foundation"
[    22.110] 	compiled for 1.21.1.3, module version = 1.0.0
[    22.110] 	ABI class: X.Org Server Extension, version 10.0
[    22.110] (==) Matched intel as autoconfigured driver 0
[    22.110] (==) Matched modesetting as autoconfigured driver 1
[    22.110] (==) Matched fbdev as autoconfigured driver 2
[    22.110] (==) Matched vesa as autoconfigured driver 3
[    22.110] (==) Assigned the driver to the xf86ConfigLayout
[    22.110] (II) LoadModule: "intel"
[    22.110] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    22.622] (II) Module intel: vendor="X.Org Foundation"
[    22.622] 	compiled for 1.21.1.1, module version = 2.99.917
[    22.622] 	Module class: X.Org Video Driver
[    22.622] 	ABI class: X.Org Video Driver, version 25.2
[    22.622] (II) LoadModule: "modesetting"
[    22.622] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    22.970] (II) Module modesetting: vendor="X.Org Foundation"
[    22.970] 	compiled for 1.21.1.3, module version = 1.21.1
[    22.970] 	Module class: X.Org Video Driver
[    22.970] 	ABI class: X.Org Video Driver, version 25.2
[    22.970] (II) LoadModule: "fbdev"
[    22.985] (WW) Warning, couldn't open module fbdev
[    22.985] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    22.985] (II) LoadModule: "vesa"
[    22.985] (WW) Warning, couldn't open module vesa
[    22.985] (EE) Failed to load module "vesa" (module does not exist, 0)
[    22.985] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    22.986] (II) intel: Driver for Intel(R) HD Graphics
[    22.986] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    22.986] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    22.986] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    23.020] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[    23.020] (II) intel(0): SNA compiled from 2.99.917-916-g31486f40
[    23.038] (WW) Falling back to old probe method for modesetting
[    23.043] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[    23.043] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 4 threads
[    23.043] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    23.043] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.043] (==) intel(0): RGB weight 888
[    23.043] (==) intel(0): Default visual is TrueColor
[    23.045] (II) intel(0): Output LVDS1 has no monitor section
[    23.045] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[    23.045] (II) intel(0): Enabled output LVDS1
[    23.045] (II) intel(0): Output VGA1 has no monitor section
[    23.045] (II) intel(0): Enabled output VGA1
[    23.046] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    23.046] (II) intel(0): Output VIRTUAL1 has no monitor section
[    23.046] (II) intel(0): Enabled output VIRTUAL1
[    23.046] (--) intel(0): Output LVDS1 using initial mode 1920x1080 on pipe 0
[    23.046] (==) intel(0): TearFree disabled
[    23.046] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    23.046] (==) intel(0): DPI set to (96, 96)
[    23.046] (II) Loading sub module "dri3"
[    23.046] (II) LoadModule: "dri3"
[    23.046] (II) Module "dri3" already built-in
[    23.046] (II) Loading sub module "dri2"
[    23.046] (II) LoadModule: "dri2"
[    23.046] (II) Module "dri2" already built-in
[    23.046] (II) Loading sub module "present"
[    23.046] (II) LoadModule: "present"
[    23.046] (II) Module "present" already built-in
[    23.046] (II) UnloadModule: "modesetting"
[    23.046] (II) Unloading modesetting
[    23.137] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[    23.137] (==) intel(0): Backing store enabled
[    23.137] (==) intel(0): Silken mouse enabled
[    23.137] (II) intel(0): HW Cursor enabled
[    23.178] (==) intel(0): DPMS enabled
[    23.178] (==) intel(0): Display hotplug detection enabled
[    23.178] (II) intel(0): [DRI2] Setup complete
[    23.178] (II) intel(0): [DRI2]   DRI driver: i965
[    23.178] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    23.178] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    23.178] (II) intel(0): hardware support for Present enabled
[    23.178] (II) Initializing extension Generic Event Extension
[    23.179] (II) Initializing extension SHAPE
[    23.179] (II) Initializing extension MIT-SHM
[    23.179] (II) Initializing extension XInputExtension
[    23.192] (II) Initializing extension XTEST
[    23.192] (II) Initializing extension BIG-REQUESTS
[    23.193] (II) Initializing extension SYNC
[    23.193] (II) Initializing extension XKEYBOARD
[    23.193] (II) Initializing extension XC-MISC
[    23.193] (II) Initializing extension SECURITY
[    23.194] (II) Initializing extension XFIXES
[    23.194] (II) Initializing extension RENDER
[    23.194] (II) Initializing extension RANDR
[    23.195] (II) Initializing extension COMPOSITE
[    23.195] (II) Initializing extension DAMAGE
[    23.195] (II) Initializing extension MIT-SCREEN-SAVER
[    23.196] (II) Initializing extension DOUBLE-BUFFER
[    23.196] (II) Initializing extension RECORD
[    23.196] (II) Initializing extension DPMS
[    23.197] (II) Initializing extension Present
[    23.197] (II) Initializing extension DRI3
[    23.197] (II) Initializing extension X-Resource
[    23.197] (II) Initializing extension XVideo
[    23.198] (II) Initializing extension XVideo-MotionCompensation
[    23.198] (II) Initializing extension GLX
[    24.104] (II) AIGLX: Loaded and initialized i965
[    24.104] (II) GLX: Initialized DRI2 GL provider for screen 0
[    24.104] (II) Initializing extension XFree86-VidModeExtension
[    24.105] (II) Initializing extension XFree86-DGA
[    24.105] (II) Initializing extension XFree86-DRI
[    24.105] (II) Initializing extension DRI2
[    24.145] (II) intel(0): switch to mode 1920x1080@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[    24.148] (II) intel(0): Setting screen physical size to 508 x 285
[    24.576] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    24.576] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    24.576] (II) LoadModule: "libinput"
[    24.577] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    24.609] (II) Module libinput: vendor="X.Org Foundation"
[    24.609] 	compiled for 1.21.1, module version = 1.2.0
[    24.609] 	Module class: X.Org XInput Driver
[    24.609] 	ABI class: X.Org XInput driver, version 24.4
[    24.609] (II) Using input driver 'libinput' for 'Power Button'
[    24.609] (**) Power Button: always reports core events
[    24.609] (**) Option "Device" "/dev/input/event2"
[    24.617] (**) Option "_source" "server/udev"
[    24.736] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    24.736] (II) event2  - Power Button: device is a keyboard
[    24.736] (II) event2  - Power Button: device removed
[    24.771] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    24.771] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.773] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    24.774] (II) event2  - Power Button: device is a keyboard
[    24.775] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    24.775] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    24.775] (II) Using input driver 'libinput' for 'Video Bus'
[    24.776] (**) Video Bus: always reports core events
[    24.776] (**) Option "Device" "/dev/input/event11"
[    24.776] (**) Option "_source" "server/udev"
[    24.778] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[    24.778] (II) event11 - Video Bus: device is a keyboard
[    24.778] (II) event11 - Video Bus: device removed
[    24.851] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event11"
[    24.851] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    24.854] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[    24.854] (II) event11 - Video Bus: device is a keyboard
[    24.856] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    24.856] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    24.856] (II) Using input driver 'libinput' for 'Video Bus'
[    24.856] (**) Video Bus: always reports core events
[    24.856] (**) Option "Device" "/dev/input/event12"
[    24.856] (**) Option "_source" "server/udev"
[    24.859] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[    24.859] (II) event12 - Video Bus: device is a keyboard
[    24.859] (II) event12 - Video Bus: device removed
[    24.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input15/event12"
[    24.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    24.921] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[    24.921] (II) event12 - Video Bus: device is a keyboard
[    24.923] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    24.923] (II) No input driver specified, ignoring this device.
[    24.923] (II) This device may have been added with another device file.
[    24.924] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    24.924] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    24.924] (II) Using input driver 'libinput' for 'Sleep Button'
[    24.924] (**) Sleep Button: always reports core events
[    24.924] (**) Option "Device" "/dev/input/event1"
[    24.924] (**) Option "_source" "server/udev"
[    24.926] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    24.926] (II) event1  - Sleep Button: device is a keyboard
[    24.927] (II) event1  - Sleep Button: device removed
[    24.958] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    24.958] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    24.960] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    24.961] (II) event1  - Sleep Button: device is a keyboard
[    24.962] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[    24.962] (II) No input driver specified, ignoring this device.
[    24.962] (II) This device may have been added with another device file.
[    24.963] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[    24.963] (II) No input driver specified, ignoring this device.
[    24.963] (II) This device may have been added with another device file.
[    24.964] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[    24.964] (II) No input driver specified, ignoring this device.
[    24.964] (II) This device may have been added with another device file.
[    24.965] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[    24.965] (II) No input driver specified, ignoring this device.
[    24.965] (II) This device may have been added with another device file.
[    24.966] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event20)
[    24.966] (II) No input driver specified, ignoring this device.
[    24.966] (II) This device may have been added with another device file.
[    24.967] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event21)
[    24.967] (II) No input driver specified, ignoring this device.
[    24.967] (II) This device may have been added with another device file.
[    24.969] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event4)
[    24.969] (**) 2.4G Mouse: Applying InputClass "libinput keyboard catchall"
[    24.969] (II) Using input driver 'libinput' for '2.4G Mouse'
[    24.970] (**) 2.4G Mouse: always reports core events
[    24.970] (**) Option "Device" "/dev/input/event4"
[    24.970] (**) Option "_source" "server/udev"
[    24.973] (II) event4  - 2.4G Mouse: is tagged by udev as: Keyboard
[    24.973] (II) event4  - 2.4G Mouse: device is a keyboard
[    24.973] (II) event4  - 2.4G Mouse: device removed
[    24.998] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:1EA7:0066.0001/input/input5/event4"
[    24.998] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: KEYBOARD, id 10)
[    25.002] (II) event4  - 2.4G Mouse: is tagged by udev as: Keyboard
[    25.002] (II) event4  - 2.4G Mouse: device is a keyboard
[    25.004] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event5)
[    25.005] (II) No input driver specified, ignoring this device.
[    25.005] (II) This device may have been added with another device file.
[    25.006] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event6)
[    25.006] (**) 2.4G Mouse: Applying InputClass "libinput pointer catchall"
[    25.006] (II) Using input driver 'libinput' for '2.4G Mouse'
[    25.006] (**) 2.4G Mouse: always reports core events
[    25.006] (**) Option "Device" "/dev/input/event6"
[    25.006] (**) Option "_source" "server/udev"
[    25.009] (II) event6  - 2.4G Mouse: is tagged by udev as: Mouse
[    25.010] (II) event6  - 2.4G Mouse: device is a pointer
[    25.010] (II) event6  - 2.4G Mouse: device removed
[    25.064] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1EA7:0066.0002/input/input7/event6"
[    25.065] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: MOUSE, id 11)
[    25.065] (**) Option "AccelerationScheme" "none"
[    25.065] (**) 2.4G Mouse: (accel) selected scheme none/0
[    25.065] (**) 2.4G Mouse: (accel) acceleration factor: 2.000
[    25.065] (**) 2.4G Mouse: (accel) acceleration threshold: 4
[    25.068] (II) event6  - 2.4G Mouse: is tagged by udev as: Mouse
[    25.069] (II) event6  - 2.4G Mouse: device is a pointer
[    25.071] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/mouse0)
[    25.071] (II) No input driver specified, ignoring this device.
[    25.071] (II) This device may have been added with another device file.
[    25.073] (II) config/udev: Adding input device 2.4G Mouse Consumer Control (/dev/input/event7)
[    25.073] (**) 2.4G Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[    25.073] (II) Using input driver 'libinput' for '2.4G Mouse Consumer Control'
[    25.073] (**) 2.4G Mouse Consumer Control: always reports core events
[    25.073] (**) Option "Device" "/dev/input/event7"
[    25.073] (**) Option "_source" "server/udev"
[    25.076] (II) event7  - 2.4G Mouse Consumer Control: is tagged by udev as: Keyboard
[    25.076] (II) event7  - 2.4G Mouse Consumer Control: device is a keyboard
[    25.077] (II) event7  - 2.4G Mouse Consumer Control: device removed
[    25.104] (II) libinput: 2.4G Mouse Consumer Control: needs a virtual subdevice
[    25.105] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1EA7:0066.0002/input/input8/event7"
[    25.105] (II) XINPUT: Adding extended input device "2.4G Mouse Consumer Control" (type: MOUSE, id 12)
[    25.105] (**) Option "AccelerationScheme" "none"
[    25.105] (**) 2.4G Mouse Consumer Control: (accel) selected scheme none/0
[    25.105] (**) 2.4G Mouse Consumer Control: (accel) acceleration factor: 2.000
[    25.105] (**) 2.4G Mouse Consumer Control: (accel) acceleration threshold: 4
[    25.108] (II) event7  - 2.4G Mouse Consumer Control: is tagged by udev as: Keyboard
[    25.109] (II) event7  - 2.4G Mouse Consumer Control: device is a keyboard
[    25.111] (II) config/udev: Adding input device 2.4G Mouse System Control (/dev/input/event8)
[    25.111] (**) 2.4G Mouse System Control: Applying InputClass "libinput keyboard catchall"
[    25.111] (II) Using input driver 'libinput' for '2.4G Mouse System Control'
[    25.111] (**) 2.4G Mouse System Control: always reports core events
[    25.111] (**) Option "Device" "/dev/input/event8"
[    25.111] (**) Option "_source" "server/udev"
[    25.114] (II) event8  - 2.4G Mouse System Control: is tagged by udev as: Keyboard
[    25.114] (II) event8  - 2.4G Mouse System Control: device is a keyboard
[    25.115] (II) event8  - 2.4G Mouse System Control: device removed
[    25.144] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1EA7:0066.0002/input/input9/event8"
[    25.145] (II) XINPUT: Adding extended input device "2.4G Mouse System Control" (type: KEYBOARD, id 13)
[    25.148] (II) event8  - 2.4G Mouse System Control: is tagged by udev as: Keyboard
[    25.149] (II) event8  - 2.4G Mouse System Control: device is a keyboard
[    25.151] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event14)
[    25.151] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[    25.151] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[    25.151] (**) Integrated Camera: Integrated C: always reports core events
[    25.151] (**) Option "Device" "/dev/input/event14"
[    25.151] (**) Option "_source" "server/udev"
[    25.154] (II) event14 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[    25.155] (II) event14 - Integrated Camera: Integrated C: device is a keyboard
[    25.155] (II) event14 - Integrated Camera: Integrated C: device removed
[    25.211] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input17/event14"
[    25.211] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 14)
[    25.215] (II) event14 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[    25.215] (II) event14 - Integrated Camera: Integrated C: device is a keyboard
[    25.217] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event22)
[    25.217] (II) No input driver specified, ignoring this device.
[    25.217] (II) This device may have been added with another device file.
[    25.218] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event23)
[    25.218] (II) No input driver specified, ignoring this device.
[    25.218] (II) This device may have been added with another device file.
[    25.218] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event24)
[    25.219] (II) No input driver specified, ignoring this device.
[    25.219] (II) This device may have been added with another device file.
[    25.219] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event25)
[    25.219] (II) No input driver specified, ignoring this device.
[    25.219] (II) This device may have been added with another device file.
[    25.221] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    25.221] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    25.221] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    25.221] (**) AT Translated Set 2 keyboard: always reports core events
[    25.221] (**) Option "Device" "/dev/input/event3"
[    25.221] (**) Option "_source" "server/udev"
[    25.223] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    25.223] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    25.225] (II) event3  - AT Translated Set 2 keyboard: device removed
[    25.264] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    25.265] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[    25.267] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    25.268] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    25.271] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[    25.271] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    25.271] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    25.271] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    25.271] (II) LoadModule: "synaptics"
[    25.272] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    25.368] (II) Module synaptics: vendor="X.Org Foundation"
[    25.368] 	compiled for 1.21.1.1, module version = 1.9.1
[    25.368] 	Module class: X.Org XInput Driver
[    25.368] 	ABI class: X.Org XInput driver, version 24.4
[    25.368] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    25.368] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    25.368] (**) Option "Device" "/dev/input/event13"
[    25.424] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    25.425] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1250 - 5631 (res 59)
[    25.425] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1205 - 4834 (res 81)
[    25.425] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    25.425] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    25.425] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    25.425] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    25.425] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    25.425] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    25.491] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event13"
[    25.491] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[    25.491] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    25.491] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    25.491] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[    25.492] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    25.492] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    25.492] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    25.492] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    25.492] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    25.493] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    25.493] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    25.494] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[    25.494] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[    25.495] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[    25.495] (**) TPPS/2 IBM TrackPoint: always reports core events
[    25.495] (**) Option "Device" "/dev/input/event15"
[    25.495] (**) Option "_source" "server/udev"
[    25.497] (II) event15 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[    25.498] (II) event15 - TPPS/2 IBM TrackPoint: device is a pointer
[    25.501] (II) event15 - TPPS/2 IBM TrackPoint: device removed
[    25.558] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input16/event15"
[    25.558] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 17)
[    25.558] (**) Option "AccelerationScheme" "none"
[    25.558] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[    25.558] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    25.558] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    25.561] (II) event15 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[    25.562] (II) event15 - TPPS/2 IBM TrackPoint: device is a pointer
[    25.566] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[    25.566] (II) No input driver specified, ignoring this device.
[    25.566] (II) This device may have been added with another device file.
[    25.567] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[    25.567] (II) No input driver specified, ignoring this device.
[    25.567] (II) This device may have been added with another device file.
[    25.573] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event10)
[    25.574] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[    25.574] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[    25.574] (**) ThinkPad Extra Buttons: always reports core events
[    25.574] (**) Option "Device" "/dev/input/event10"
[    25.574] (**) Option "_source" "server/udev"
[    25.575] (II) event10 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    25.576] (II) event10 - ThinkPad Extra Buttons: device is a keyboard
[    25.576] (II) event10 - ThinkPad Extra Buttons: device removed
[    25.625] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input13/event10"
[    25.625] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 18)
[    25.627] (II) event10 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    25.628] (II) event10 - ThinkPad Extra Buttons: device is a keyboard
[    25.655] (**) 2.4G Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[    25.655] (II) Using input driver 'libinput' for '2.4G Mouse Consumer Control'
[    25.655] (**) 2.4G Mouse Consumer Control: always reports core events
[    25.655] (**) Option "Device" "/dev/input/event7"
[    25.655] (**) Option "_source" "_driver/libinput"
[    25.655] (II) libinput: 2.4G Mouse Consumer Control: is a virtual subdevice
[    25.655] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1EA7:0066.0002/input/input8/event7"
[    25.655] (II) XINPUT: Adding extended input device "2.4G Mouse Consumer Control" (type: KEYBOARD, id 19)
[    25.656] (II) intel(0): EDID vendor "AUO", prod id 4589
[    25.656] (II) intel(0): Printing DDC gathered Modelines:
[    25.656] (II) intel(0): Modeline "1920x1080"x0.0  144.60  1920 1980 2028 2132  1080 1090 1100 1130 -hsync -vsync (67.8 kHz eP)
[    25.656] (II) intel(0): Modeline "1920x1080"x0.0  144.60  1920 1980 2028 2558  1080 1090 1100 1130 -hsync -vsync (56.5 kHz e)
[   318.919] (II) event6  - 2.4G Mouse: SYN_DROPPED event - some input events have been lost.

Thank you

EDIT : things i am trying

xrandr --listproviders output

[musicarch@musicArch ~]$ xrandr --listproviders
Providers: number : 1
Provider 0: id: 0x45 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 4 outputs: 3 associated providers: 0 name:Intel

lspci | grep VGA output

[musicarch@musicArch ~]$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1)

Last edited by nahush (2022-01-13 08:23:37)

seth · 2022-01-13 08:11:08

do help me in this how can know tings regarding temp of CPU

https://wiki.archlinux.org/title/Lm_sensors

You're now running the xf86-video-intel driver on the intel chip. A second GPU is listed, but nvidia isn't considered.
Is it deactivated (eg. w/ bbswitch)?

lspci -k
pacman -Qs nvidia

nahush · 2022-01-13 08:27:45

seth wrote:

do help me in this how can know tings regarding temp of CPU
https://wiki.archlinux.org/title/Lm_sensors
You're now running the xf86-video-intel driver on the intel chip. A second GPU is listed, but nvidia isn't considered.
Is it deactivated (eg. w/ bbswitch)?
lspci -k
pacman -Qs nvidia

lspci -k output

[musicarch@musicArch ~]$ lspci -k
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
	Subsystem: Lenovo Device 21f6
	Kernel driver in use: ivb_uncore
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
	Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
	Subsystem: Lenovo Device 21f5
	Kernel driver in use: i915
	Kernel modules: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
	Subsystem: Lenovo Device 21f6
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
	Subsystem: Lenovo Device 21f6
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:16.3 Serial controller: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller (rev 04)
	Subsystem: Lenovo Device 21f6
	Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) (rev 04)
	Subsystem: Lenovo Device 21f3
	Kernel driver in use: e1000e
	Kernel modules: e1000e
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
	Subsystem: Lenovo Device 21f6
	Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
	Subsystem: Lenovo Device 21f6
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
	Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
	Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
	Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
	Subsystem: Lenovo Device 21f6
	Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
	Subsystem: Lenovo Device 21f6
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
	Subsystem: Lenovo Device 21f6
	Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
	Subsystem: Lenovo Device 21f6
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1)
	Subsystem: Lenovo Device 21f5
	Kernel modules: nouveau, nvidia_drm, nvidia
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
	Subsystem: Lenovo Device 21f5
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 08)
	Subsystem: Lenovo Device 21f6
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci_pci
02:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04)
	Subsystem: Lenovo Device 21f6
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire_ohci
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
	Subsystem: Intel Corporation Centrino Advanced-N 6205 (802.11a/b/g/n)
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi

pacman -Qs nvidia output

[musicarch@musicArch ~]$ pacman -Qs nvidia
local/egl-wayland 2:1.1.9+r3+g582b2d3-1
    EGLStream-based Wayland external platform
local/lib32-nvidia-utils 495.46-1
    NVIDIA drivers utilities (32-bit)
local/lib32-opencl-nvidia 495.46-1
    OpenCL implemention for NVIDIA (32-bit)
local/libvdpau 1.4-1
    Nvidia VDPAU library
local/libxnvctrl 495.46-2
    NVIDIA NV-CONTROL X extension
local/nvidia 495.46-7
    NVIDIA drivers for linux
local/nvidia-dkms 495.46-2
    NVIDIA drivers - module sources
local/nvidia-prime 1.0-4
    NVIDIA Prime Render Offload configuration and utilities
local/nvidia-settings 495.46-2
    Tool for configuring the NVIDIA graphics driver
local/nvidia-utils 495.46-2
    NVIDIA drivers utilities
local/nvtop 1.2.2-1
    An htop like monitoring tool for NVIDIA GPUs
local/opencl-nvidia 495.46-2
    OpenCL implemention for NVIDIA
[musicarch@musicArch ~]$

seth · 2022-01-13 08:42:29

01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1)
	Subsystem: Lenovo Device 21f5
	Kernel modules: nouveau, nvidia_drm, nvidia

But no kernel module is in use.
GK107GLM is a kepler chip and likely only supported by https://aur.archlinux.org/packages/?O=0 … _Search=Go
(You want the dkms and utils packages)

nahush · 2022-01-13 10:05:20

seth wrote:

01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1)
	Subsystem: Lenovo Device 21f5
	Kernel modules: nouveau, nvidia_drm, nvidia
But no kernel module is in use.
GK107GLM is a kepler chip and likely only supported by https://aur.archlinux.org/packages/?O=0 … _Search=Go
(You want the dkms and utils packages)

should i remove other packages. and the dkms and utils package is from the link given by you.is that right?

EDIT after installing nvidia-470xx-dkms and nvidia-470xx-utils pacman -Qs nvidia

[musicarch@musicArch ~]$ pacman -Qs nvidia
local/egl-wayland 2:1.1.9+r3+g582b2d3-1
    EGLStream-based Wayland external platform
local/lib32-opencl-nvidia 495.46-1
    OpenCL implemention for NVIDIA (32-bit)
local/libvdpau 1.4-1
    Nvidia VDPAU library
local/libxnvctrl 495.46-2
    NVIDIA NV-CONTROL X extension
local/nvidia-470xx-dkms 470.94-2
    NVIDIA drivers - module sources
local/nvidia-470xx-utils 470.94-2
    NVIDIA drivers utilities
local/opencl-nvidia 495.46-2
    OpenCL implemention for NVIDIA

xrandr --listproviders output

[musicarch@musicArch ~]$ xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x45 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 4 outputs: 3 associated providers: 1 name:Intel
Provider 1: id: 0x31f cap: 0x2, Sink Output crtcs: 4 outputs: 8 associated providers: 1 name:NVIDIA-G0
[musicarch@musicArch ~]$

what will be the next step?

Last edited by nahush (2022-01-13 10:58:26)

seth · 2022-01-13 10:39:34

You also want matching https://aur.archlinux.org/packages/opencl-nvidia-470xx/ and https://aur.archlinux.org/packages/libxnvctrl-470xx/ (though it's not immediately relevant)

Check "lspci -k" again and make sure the nvidia module is used for the the device and then post an updated xorg log and if everything looks like the nvidia chip is available try to "prime-run blender"

nahush · 2022-01-13 11:19:32

seth wrote:

You also want matching https://aur.archlinux.org/packages/opencl-nvidia-470xx/ and https://aur.archlinux.org/packages/libxnvctrl-470xx/ (though it's not immediately relevant)
Check "lspci -k" again and make sure the nvidia module is used for the the device and then post an updated xorg log and if everything looks like the nvidia chip is available try to "prime-run blender"

every thing working better then before.
is there some option for blender using prime-run automatically or should i have run it from terminal all the time.

lspci -k output for nvidia

01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1)
	Subsystem: Lenovo Device 21f5
	Kernel driver in use: nvidia
	Kernel modules: nouveau, nvidia_drm, nvidia
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
	Subsystem: Lenovo Device 21f5
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

updated Xorg.log

[    22.233] 
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[    22.233] Current Operating System: Linux musicArch 5.15.13-arch1-1 #1 SMP PREEMPT Wed, 05 Jan 2022 16:20:59 +0000 x86_64
[    22.233] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2b8d693d-b2b2-4332-9c5c-298d2abd960f rw loglevel=3 quiet
[    22.233]  
[    22.233] Current version of pixman: 0.40.0
[    22.233] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    22.233] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.233] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 13 16:35:45 2022
[    22.285] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    22.323] (==) No Layout section.  Using the first Screen section.
[    22.323] (==) No screen section available. Using defaults.
[    22.323] (**) |-->Screen "Default Screen Section" (0)
[    22.323] (**) |   |-->Monitor "<default monitor>"
[    22.324] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    22.324] (==) Automatically adding devices
[    22.324] (==) Automatically enabling devices
[    22.324] (==) Automatically adding GPU devices
[    22.324] (==) Automatically binding GPU devices
[    22.324] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    22.389] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    22.389] 	Entry deleted from font path.
[    22.389] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    22.389] 	Entry deleted from font path.
[    22.390] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    22.390] 	Entry deleted from font path.
[    22.390] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF
[    22.390] (==) ModulePath set to "/usr/lib/xorg/modules"
[    22.390] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    22.390] (II) Module ABI versions:
[    22.390] 	X.Org ANSI C Emulation: 0.4
[    22.390] 	X.Org Video Driver: 25.2
[    22.390] 	X.Org XInput driver : 24.4
[    22.390] 	X.Org Server Extension : 10.0
[    22.391] (++) using VT number 7

[    22.391] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    22.393] (II) xfree86: Adding drm device (/dev/dri/card0)
[    22.393] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    22.393] (II) xfree86: Adding drm device (/dev/dri/card1)
[    22.393] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[    22.406] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    22.409] (--) PCI:*(0@0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[    22.409] (--) PCI: (1@0:0:0) 10de:0ffc:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[    22.409] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    22.410] (II) LoadModule: "glx"
[    22.446] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    22.517] (II) Module glx: vendor="X.Org Foundation"
[    22.517] 	compiled for 1.21.1.3, module version = 1.0.0
[    22.517] 	ABI class: X.Org Server Extension, version 10.0
[    22.517] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    22.517] 	loading driver: nvidia
[    22.517] (==) Matched intel as autoconfigured driver 0
[    22.517] (==) Matched nvidia as autoconfigured driver 1
[    22.517] (==) Matched nouveau as autoconfigured driver 2
[    22.517] (==) Matched nv as autoconfigured driver 3
[    22.517] (==) Matched modesetting as autoconfigured driver 4
[    22.517] (==) Matched fbdev as autoconfigured driver 5
[    22.517] (==) Matched vesa as autoconfigured driver 6
[    22.517] (==) Assigned the driver to the xf86ConfigLayout
[    22.517] (II) LoadModule: "intel"
[    22.517] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    22.555] (II) Module intel: vendor="X.Org Foundation"
[    22.555] 	compiled for 1.21.1.1, module version = 2.99.917
[    22.555] 	Module class: X.Org Video Driver
[    22.555] 	ABI class: X.Org Video Driver, version 25.2
[    22.555] (II) LoadModule: "nvidia"
[    22.556] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    22.607] (II) Module nvidia: vendor="NVIDIA Corporation"
[    22.607] 	compiled for 1.6.99.901, module version = 1.0.0
[    22.607] 	Module class: X.Org Video Driver
[    22.615] (II) LoadModule: "nouveau"
[    22.627] (WW) Warning, couldn't open module nouveau
[    22.627] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    22.627] (II) LoadModule: "nv"
[    22.627] (WW) Warning, couldn't open module nv
[    22.627] (EE) Failed to load module "nv" (module does not exist, 0)
[    22.627] (II) LoadModule: "modesetting"
[    22.627] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    22.661] (II) Module modesetting: vendor="X.Org Foundation"
[    22.661] 	compiled for 1.21.1.3, module version = 1.21.1
[    22.661] 	Module class: X.Org Video Driver
[    22.661] 	ABI class: X.Org Video Driver, version 25.2
[    22.661] (II) LoadModule: "fbdev"
[    22.662] (WW) Warning, couldn't open module fbdev
[    22.662] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    22.662] (II) LoadModule: "vesa"
[    22.663] (WW) Warning, couldn't open module vesa
[    22.663] (EE) Failed to load module "vesa" (module does not exist, 0)
[    22.663] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    22.663] (II) intel: Driver for Intel(R) HD Graphics
[    22.663] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    22.663] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    22.663] (II) NVIDIA dlloader X Driver  470.94  Mon Dec  6 22:37:33 UTC 2021
[    22.663] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    22.664] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    22.698] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[    22.699] (II) intel(0): SNA compiled from 2.99.917-916-g31486f40
[    22.715] (WW) Falling back to old probe method for modesetting
[    22.726] (II) Loading sub module "fb"
[    22.726] (II) LoadModule: "fb"
[    22.726] (II) Module "fb" already built-in
[    22.727] (II) Loading sub module "wfb"
[    22.727] (II) LoadModule: "wfb"
[    22.727] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    22.737] (II) Module wfb: vendor="X.Org Foundation"
[    22.737] 	compiled for 1.21.1.3, module version = 1.0.0
[    22.737] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    22.737] (II) Loading sub module "ramdac"
[    22.737] (II) LoadModule: "ramdac"
[    22.737] (II) Module "ramdac" already built-in
[    22.754] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[    22.754] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 4 threads
[    22.754] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    22.754] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    22.754] (==) intel(0): RGB weight 888
[    22.754] (==) intel(0): Default visual is TrueColor
[    22.755] (II) intel(0): Output LVDS1 has no monitor section
[    22.756] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[    22.756] (II) intel(0): Enabled output LVDS1
[    22.756] (II) intel(0): Output VGA1 has no monitor section
[    22.756] (II) intel(0): Enabled output VGA1
[    22.756] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    22.756] (II) intel(0): Output VIRTUAL1 has no monitor section
[    22.756] (II) intel(0): Enabled output VIRTUAL1
[    22.756] (--) intel(0): Output LVDS1 using initial mode 1920x1080 on pipe 0
[    22.756] (==) intel(0): TearFree disabled
[    22.756] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    22.756] (==) intel(0): DPI set to (96, 96)
[    22.757] (II) Loading sub module "dri3"
[    22.757] (II) LoadModule: "dri3"
[    22.757] (II) Module "dri3" already built-in
[    22.757] (II) Loading sub module "dri2"
[    22.757] (II) LoadModule: "dri2"
[    22.757] (II) Module "dri2" already built-in
[    22.757] (II) Loading sub module "present"
[    22.757] (II) LoadModule: "present"
[    22.757] (II) Module "present" already built-in
[    22.757] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[    22.757] (==) NVIDIA(G0): RGB weight 888
[    22.757] (==) NVIDIA(G0): Default visual is TrueColor
[    22.757] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[    22.757] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    22.757] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[    22.758] (**) NVIDIA(G0): Enabling 2D acceleration
[    22.758] (II) Loading sub module "glxserver_nvidia"
[    22.758] (II) LoadModule: "glxserver_nvidia"
[    22.758] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    23.490] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    23.490] 	compiled for 1.6.99.901, module version = 1.0.0
[    23.490] 	Module class: X.Org Server Extension
[    23.490] (II) NVIDIA GLX Module  470.94  Mon Dec  6 22:34:41 UTC 2021
[    23.523] (II) NVIDIA: The X server supports PRIME Render Offload.
[    25.543] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    25.543] (--) NVIDIA(0):     CRT-0
[    25.543] (--) NVIDIA(0):     DFP-0
[    25.543] (--) NVIDIA(0):     DFP-1
[    25.543] (--) NVIDIA(0):     DFP-2
[    25.543] (--) NVIDIA(0):     DFP-3
[    25.543] (--) NVIDIA(0):     DFP-4
[    25.543] (--) NVIDIA(0):     DFP-5
[    25.543] (--) NVIDIA(0):     DFP-6
[    25.544] (II) NVIDIA(G0): NVIDIA GPU Quadro K1000M (GK107GL) at PCI:1:0:0 (GPU-0)
[    25.544] (--) NVIDIA(G0): Memory: 2097152 kBytes
[    25.544] (--) NVIDIA(G0): VideoBIOS: 80.07.33.00.0f
[    25.544] (II) NVIDIA(G0): Detected PCI Express Link width: 16X
[    25.545] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    25.545] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    25.545] (--) NVIDIA(GPU-0): 
[    25.549] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    25.549] (--) NVIDIA(GPU-0): DFP-0: Internal LVDS
[    25.549] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    25.549] (--) NVIDIA(GPU-0): 
[    25.549] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    25.549] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    25.549] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    25.549] (--) NVIDIA(GPU-0): 
[    25.549] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    25.549] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[    25.549] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[    25.549] (--) NVIDIA(GPU-0): 
[    25.549] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    25.549] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    25.549] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    25.549] (--) NVIDIA(GPU-0): 
[    25.549] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    25.549] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[    25.549] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[    25.549] (--) NVIDIA(GPU-0): 
[    25.549] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    25.549] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[    25.549] (--) NVIDIA(GPU-0): DFP-5: 480.0 MHz maximum pixel clock
[    25.549] (--) NVIDIA(GPU-0): 
[    25.549] (--) NVIDIA(GPU-0): DFP-6: disconnected
[    25.549] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[    25.549] (--) NVIDIA(GPU-0): DFP-6: 480.0 MHz maximum pixel clock
[    25.549] (--) NVIDIA(GPU-0): 
[    25.549] (II) NVIDIA(G0): Validated MetaModes:
[    25.549] (II) NVIDIA(G0):     "NULL"
[    25.549] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[    25.549] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[    25.549] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[    25.549] (II) UnloadModule: "modesetting"
[    25.549] (II) Unloading modesetting
[    26.246] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[    26.246] (==) intel(0): Backing store enabled
[    26.246] (==) intel(0): Silken mouse enabled
[    26.246] (II) intel(0): HW Cursor enabled
[    26.249] (==) intel(0): DPMS enabled
[    26.249] (==) intel(0): Display hotplug detection enabled
[    26.249] (II) intel(0): [DRI2] Setup complete
[    26.249] (II) intel(0): [DRI2]   DRI driver: i965
[    26.249] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    26.249] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    26.249] (II) intel(0): hardware support for Present enabled
[    26.250] (II) NVIDIA: Reserving 6144.00 MB of virtual memory for indirect memory
[    26.250] (II) NVIDIA:     access.
[    26.253] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    26.253] (II) NVIDIA(G0):     may not be running or the "AcpidSocketPath" X
[    26.253] (II) NVIDIA(G0):     configuration option may not be set correctly.  When the
[    26.253] (II) NVIDIA(G0):     ACPI event daemon is available, the NVIDIA X driver will
[    26.253] (II) NVIDIA(G0):     try to use it to receive ACPI event notifications.  For
[    26.253] (II) NVIDIA(G0):     details, please see the "ConnectToAcpid" and
[    26.253] (II) NVIDIA(G0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    26.253] (II) NVIDIA(G0):     Config Options in the README.
[    26.287] (II) NVIDIA(G0): Setting mode "NULL"
[    26.308] (==) NVIDIA(G0): Disabling shared memory pixmaps
[    26.308] (==) NVIDIA(G0): Backing store enabled
[    26.308] (==) NVIDIA(G0): Silken mouse enabled
[    26.308] (==) NVIDIA(G0): DPMS enabled
[    26.317] (II) Loading sub module "dri2"
[    26.317] (II) LoadModule: "dri2"
[    26.317] (II) Module "dri2" already built-in
[    26.317] (II) NVIDIA(G0): [DRI2] Setup complete
[    26.317] (II) NVIDIA(G0): [DRI2]   VDPAU driver: nvidia
[    26.317] (II) Initializing extension Generic Event Extension
[    26.318] (II) Initializing extension SHAPE
[    26.318] (II) Initializing extension MIT-SHM
[    26.318] (II) Initializing extension XInputExtension
[    26.319] (II) Initializing extension XTEST
[    26.320] (II) Initializing extension BIG-REQUESTS
[    26.320] (II) Initializing extension SYNC
[    26.320] (II) Initializing extension XKEYBOARD
[    26.320] (II) Initializing extension XC-MISC
[    26.321] (II) Initializing extension SECURITY
[    26.321] (II) Initializing extension XFIXES
[    26.321] (II) Initializing extension RENDER
[    26.321] (II) Initializing extension RANDR
[    26.322] (II) Initializing extension COMPOSITE
[    26.322] (II) Initializing extension DAMAGE
[    26.322] (II) Initializing extension MIT-SCREEN-SAVER
[    26.323] (II) Initializing extension DOUBLE-BUFFER
[    26.323] (II) Initializing extension RECORD
[    26.323] (II) Initializing extension DPMS
[    26.323] (II) Initializing extension Present
[    26.324] (II) Initializing extension DRI3
[    26.324] (II) Initializing extension X-Resource
[    26.324] (II) Initializing extension XVideo
[    26.324] (II) Initializing extension XVideo-MotionCompensation
[    26.324] (II) Initializing extension GLX
[    26.325] (II) Initializing extension GLX
[    26.325] (II) Indirect GLX disabled.
[    26.638] (II) AIGLX: Loaded and initialized i965
[    26.638] (II) GLX: Initialized DRI2 GL provider for screen 0
[    26.638] (II) Initializing extension XFree86-VidModeExtension
[    26.638] (II) Initializing extension XFree86-DGA
[    26.639] (II) Initializing extension XFree86-DRI
[    26.639] (II) Initializing extension DRI2
[    26.639] (II) Initializing extension NV-GLX
[    26.639] (II) Initializing extension NV-CONTROL
[    26.678] (II) intel(0): switch to mode 1920x1080@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[    26.686] (II) intel(0): Setting screen physical size to 508 x 285
[    27.076] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    27.077] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    27.077] (II) LoadModule: "libinput"
[    27.077] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    27.101] (II) Module libinput: vendor="X.Org Foundation"
[    27.102] 	compiled for 1.21.1, module version = 1.2.0
[    27.102] 	Module class: X.Org XInput Driver
[    27.102] 	ABI class: X.Org XInput driver, version 24.4
[    27.102] (II) Using input driver 'libinput' for 'Power Button'
[    27.102] (**) Power Button: always reports core events
[    27.102] (**) Option "Device" "/dev/input/event2"
[    27.102] (**) Option "_source" "server/udev"
[    27.228] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    27.228] (II) event2  - Power Button: device is a keyboard
[    27.229] (II) event2  - Power Button: device removed
[    27.264] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    27.264] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    27.267] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    27.267] (II) event2  - Power Button: device is a keyboard
[    27.269] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    27.269] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    27.269] (II) Using input driver 'libinput' for 'Video Bus'
[    27.269] (**) Video Bus: always reports core events
[    27.269] (**) Option "Device" "/dev/input/event11"
[    27.269] (**) Option "_source" "server/udev"
[    27.271] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[    27.271] (II) event11 - Video Bus: device is a keyboard
[    27.272] (II) event11 - Video Bus: device removed
[    27.331] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event11"
[    27.331] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    27.334] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[    27.334] (II) event11 - Video Bus: device is a keyboard
[    27.336] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    27.336] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    27.336] (II) Using input driver 'libinput' for 'Video Bus'
[    27.336] (**) Video Bus: always reports core events
[    27.336] (**) Option "Device" "/dev/input/event12"
[    27.336] (**) Option "_source" "server/udev"
[    27.339] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[    27.339] (II) event12 - Video Bus: device is a keyboard
[    27.339] (II) event12 - Video Bus: device removed
[    27.411] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input15/event12"
[    27.411] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    27.414] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[    27.415] (II) event12 - Video Bus: device is a keyboard
[    27.417] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    27.417] (II) No input driver specified, ignoring this device.
[    27.417] (II) This device may have been added with another device file.
[    27.418] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    27.418] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    27.418] (II) Using input driver 'libinput' for 'Sleep Button'
[    27.418] (**) Sleep Button: always reports core events
[    27.418] (**) Option "Device" "/dev/input/event1"
[    27.418] (**) Option "_source" "server/udev"
[    27.420] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    27.420] (II) event1  - Sleep Button: device is a keyboard
[    27.420] (II) event1  - Sleep Button: device removed
[    27.464] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    27.465] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    27.467] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    27.467] (II) event1  - Sleep Button: device is a keyboard
[    27.469] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[    27.469] (II) No input driver specified, ignoring this device.
[    27.469] (II) This device may have been added with another device file.
[    27.470] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[    27.471] (II) No input driver specified, ignoring this device.
[    27.471] (II) This device may have been added with another device file.
[    27.472] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[    27.472] (II) No input driver specified, ignoring this device.
[    27.472] (II) This device may have been added with another device file.
[    27.472] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
[    27.472] (II) No input driver specified, ignoring this device.
[    27.473] (II) This device may have been added with another device file.
[    27.473] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event19)
[    27.473] (II) No input driver specified, ignoring this device.
[    27.473] (II) This device may have been added with another device file.
[    27.474] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event20)
[    27.474] (II) No input driver specified, ignoring this device.
[    27.474] (II) This device may have been added with another device file.
[    27.477] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event4)
[    27.477] (**) 2.4G Mouse: Applying InputClass "libinput keyboard catchall"
[    27.477] (II) Using input driver 'libinput' for '2.4G Mouse'
[    27.477] (**) 2.4G Mouse: always reports core events
[    27.477] (**) Option "Device" "/dev/input/event4"
[    27.477] (**) Option "_source" "server/udev"
[    27.480] (II) event4  - 2.4G Mouse: is tagged by udev as: Keyboard
[    27.480] (II) event4  - 2.4G Mouse: device is a keyboard
[    27.481] (II) event4  - 2.4G Mouse: device removed
[    27.505] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:1EA7:0066.0001/input/input5/event4"
[    27.505] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: KEYBOARD, id 10)
[    27.509] (II) event4  - 2.4G Mouse: is tagged by udev as: Keyboard
[    27.509] (II) event4  - 2.4G Mouse: device is a keyboard
[    27.511] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event5)
[    27.511] (II) No input driver specified, ignoring this device.
[    27.511] (II) This device may have been added with another device file.
[    27.513] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event6)
[    27.513] (**) 2.4G Mouse: Applying InputClass "libinput pointer catchall"
[    27.513] (II) Using input driver 'libinput' for '2.4G Mouse'
[    27.513] (**) 2.4G Mouse: always reports core events
[    27.513] (**) Option "Device" "/dev/input/event6"
[    27.513] (**) Option "_source" "server/udev"
[    27.516] (II) event6  - 2.4G Mouse: is tagged by udev as: Mouse
[    27.517] (II) event6  - 2.4G Mouse: device is a pointer
[    27.517] (II) event6  - 2.4G Mouse: device removed
[    27.584] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1EA7:0066.0002/input/input7/event6"
[    27.584] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: MOUSE, id 11)
[    27.585] (**) Option "AccelerationScheme" "none"
[    27.585] (**) 2.4G Mouse: (accel) selected scheme none/0
[    27.585] (**) 2.4G Mouse: (accel) acceleration factor: 2.000
[    27.585] (**) 2.4G Mouse: (accel) acceleration threshold: 4
[    27.588] (II) event6  - 2.4G Mouse: is tagged by udev as: Mouse
[    27.589] (II) event6  - 2.4G Mouse: device is a pointer
[    27.591] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/mouse0)
[    27.591] (II) No input driver specified, ignoring this device.
[    27.591] (II) This device may have been added with another device file.
[    27.593] (II) config/udev: Adding input device 2.4G Mouse Consumer Control (/dev/input/event7)
[    27.593] (**) 2.4G Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[    27.593] (II) Using input driver 'libinput' for '2.4G Mouse Consumer Control'
[    27.593] (**) 2.4G Mouse Consumer Control: always reports core events
[    27.593] (**) Option "Device" "/dev/input/event7"
[    27.593] (**) Option "_source" "server/udev"
[    27.596] (II) event7  - 2.4G Mouse Consumer Control: is tagged by udev as: Keyboard
[    27.597] (II) event7  - 2.4G Mouse Consumer Control: device is a keyboard
[    27.597] (II) event7  - 2.4G Mouse Consumer Control: device removed
[    27.638] (II) libinput: 2.4G Mouse Consumer Control: needs a virtual subdevice
[    27.638] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1EA7:0066.0002/input/input8/event7"
[    27.638] (II) XINPUT: Adding extended input device "2.4G Mouse Consumer Control" (type: MOUSE, id 12)
[    27.638] (**) Option "AccelerationScheme" "none"
[    27.638] (**) 2.4G Mouse Consumer Control: (accel) selected scheme none/0
[    27.638] (**) 2.4G Mouse Consumer Control: (accel) acceleration factor: 2.000
[    27.638] (**) 2.4G Mouse Consumer Control: (accel) acceleration threshold: 4
[    27.642] (II) event7  - 2.4G Mouse Consumer Control: is tagged by udev as: Keyboard
[    27.642] (II) event7  - 2.4G Mouse Consumer Control: device is a keyboard
[    27.645] (II) config/udev: Adding input device 2.4G Mouse System Control (/dev/input/event8)
[    27.645] (**) 2.4G Mouse System Control: Applying InputClass "libinput keyboard catchall"
[    27.645] (II) Using input driver 'libinput' for '2.4G Mouse System Control'
[    27.645] (**) 2.4G Mouse System Control: always reports core events
[    27.645] (**) Option "Device" "/dev/input/event8"
[    27.645] (**) Option "_source" "server/udev"
[    27.648] (II) event8  - 2.4G Mouse System Control: is tagged by udev as: Keyboard
[    27.648] (II) event8  - 2.4G Mouse System Control: device is a keyboard
[    27.648] (II) event8  - 2.4G Mouse System Control: device removed
[    27.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1EA7:0066.0002/input/input9/event8"
[    27.678] (II) XINPUT: Adding extended input device "2.4G Mouse System Control" (type: KEYBOARD, id 13)
[    27.682] (II) event8  - 2.4G Mouse System Control: is tagged by udev as: Keyboard
[    27.682] (II) event8  - 2.4G Mouse System Control: device is a keyboard
[    27.685] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event14)
[    27.685] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[    27.685] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[    27.685] (**) Integrated Camera: Integrated C: always reports core events
[    27.685] (**) Option "Device" "/dev/input/event14"
[    27.685] (**) Option "_source" "server/udev"
[    27.688] (II) event14 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[    27.688] (II) event14 - Integrated Camera: Integrated C: device is a keyboard
[    27.688] (II) event14 - Integrated Camera: Integrated C: device removed
[    27.744] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input17/event14"
[    27.744] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 14)
[    27.748] (II) event14 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[    27.748] (II) event14 - Integrated Camera: Integrated C: device is a keyboard
[    27.750] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event22)
[    27.750] (II) No input driver specified, ignoring this device.
[    27.750] (II) This device may have been added with another device file.
[    27.751] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event23)
[    27.751] (II) No input driver specified, ignoring this device.
[    27.751] (II) This device may have been added with another device file.
[    27.752] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event24)
[    27.752] (II) No input driver specified, ignoring this device.
[    27.752] (II) This device may have been added with another device file.
[    27.753] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event25)
[    27.753] (II) No input driver specified, ignoring this device.
[    27.753] (II) This device may have been added with another device file.
[    27.754] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    27.754] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    27.754] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    27.754] (**) AT Translated Set 2 keyboard: always reports core events
[    27.754] (**) Option "Device" "/dev/input/event3"
[    27.754] (**) Option "_source" "server/udev"
[    27.756] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    27.756] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    27.759] (II) event3  - AT Translated Set 2 keyboard: device removed
[    27.798] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    27.798] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[    27.801] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    27.801] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    27.805] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[    27.805] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    27.805] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    27.805] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    27.805] (II) LoadModule: "synaptics"
[    27.805] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    27.844] (II) Module synaptics: vendor="X.Org Foundation"
[    27.844] 	compiled for 1.21.1.1, module version = 1.9.1
[    27.844] 	Module class: X.Org XInput Driver
[    27.844] 	ABI class: X.Org XInput driver, version 24.4
[    27.844] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    27.844] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    27.844] (**) Option "Device" "/dev/input/event13"
[    27.904] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    27.905] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1250 - 5631 (res 59)
[    27.905] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1205 - 4834 (res 81)
[    27.905] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    27.905] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    27.905] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    27.905] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    27.905] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    27.905] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    27.958] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event13"
[    27.958] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[    27.958] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    27.958] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    27.958] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[    27.958] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    27.958] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    27.958] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    27.958] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    27.958] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    27.960] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    27.960] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    27.961] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event21)
[    27.961] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[    27.961] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[    27.961] (**) TPPS/2 IBM TrackPoint: always reports core events
[    27.961] (**) Option "Device" "/dev/input/event21"
[    27.961] (**) Option "_source" "server/udev"
[    27.964] (II) event21 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[    27.965] (II) event21 - TPPS/2 IBM TrackPoint: device is a pointer
[    27.968] (II) event21 - TPPS/2 IBM TrackPoint: device removed
[    28.024] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input16/event21"
[    28.025] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 17)
[    28.025] (**) Option "AccelerationScheme" "none"
[    28.025] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[    28.025] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    28.025] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    28.028] (II) event21 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[    28.029] (II) event21 - TPPS/2 IBM TrackPoint: device is a pointer
[    28.033] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[    28.033] (II) No input driver specified, ignoring this device.
[    28.033] (II) This device may have been added with another device file.
[    28.034] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[    28.034] (II) No input driver specified, ignoring this device.
[    28.034] (II) This device may have been added with another device file.
[    28.041] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event10)
[    28.041] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[    28.041] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[    28.041] (**) ThinkPad Extra Buttons: always reports core events
[    28.041] (**) Option "Device" "/dev/input/event10"
[    28.041] (**) Option "_source" "server/udev"
[    28.043] (II) event10 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    28.043] (II) event10 - ThinkPad Extra Buttons: device is a keyboard
[    28.043] (II) event10 - ThinkPad Extra Buttons: device removed
[    28.078] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input13/event10"
[    28.078] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 18)
[    28.080] (II) event10 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    28.080] (II) event10 - ThinkPad Extra Buttons: device is a keyboard
[    28.213] (**) 2.4G Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[    28.213] (II) Using input driver 'libinput' for '2.4G Mouse Consumer Control'
[    28.213] (**) 2.4G Mouse Consumer Control: always reports core events
[    28.213] (**) Option "Device" "/dev/input/event7"
[    28.213] (**) Option "_source" "_driver/libinput"
[    28.213] (II) libinput: 2.4G Mouse Consumer Control: is a virtual subdevice
[    28.213] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1EA7:0066.0002/input/input8/event7"
[    28.213] (II) XINPUT: Adding extended input device "2.4G Mouse Consumer Control" (type: KEYBOARD, id 19)
[    28.248] (II) intel(0): EDID vendor "AUO", prod id 4589
[    28.248] (II) intel(0): Printing DDC gathered Modelines:
[    28.248] (II) intel(0): Modeline "1920x1080"x0.0  144.60  1920 1980 2028 2132  1080 1090 1100 1130 -hsync -vsync (67.8 kHz eP)
[    28.248] (II) intel(0): Modeline "1920x1080"x0.0  144.60  1920 1980 2028 2558  1080 1090 1100 1130 -hsync -vsync (56.5 kHz e)
[    50.702] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    50.702] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    50.702] (--) NVIDIA(GPU-0): 
[    50.706] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    50.706] (--) NVIDIA(GPU-0): DFP-0: Internal LVDS
[    50.706] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    50.706] (--) NVIDIA(GPU-0): 
[    50.707] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    50.707] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    50.707] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    50.707] (--) NVIDIA(GPU-0): 
[    50.707] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    50.707] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[    50.707] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[    50.707] (--) NVIDIA(GPU-0): 
[    50.707] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    50.707] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    50.707] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    50.707] (--) NVIDIA(GPU-0): 
[    50.707] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    50.707] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[    50.707] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[    50.707] (--) NVIDIA(GPU-0): 
[    50.707] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    50.707] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[    50.707] (--) NVIDIA(GPU-0): DFP-5: 480.0 MHz maximum pixel clock
[    50.707] (--) NVIDIA(GPU-0): 
[    50.707] (--) NVIDIA(GPU-0): DFP-6: disconnected
[    50.707] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[    50.707] (--) NVIDIA(GPU-0): DFP-6: 480.0 MHz maximum pixel clock
[    50.707] (--) NVIDIA(GPU-0):

seth · 2022-01-13 14:28:59

is there some option for blender using prime-run automatically or should i have run it from terminal all the time.

I guess not, but you could shadow /usr/bin/blender w/ an executable script in /usr/local/bin/blender that says

#!/bin/sh
prime-run /usr/bin/blender "$@"

Whether that's invoked by the blender desktop service (or whatever you usually use to run it) you'll have to look up in /usr/share/applications/blender.desktop

nahush · 2022-01-13 15:16:28

seth wrote:

is there some option for blender using prime-run automatically or should i have run it from terminal all the time.
I guess not, but you could shadow /usr/bin/blender w/ an executable script in /usr/local/bin/blender that says
#!/bin/sh
prime-run /usr/bin/blender "$@"
Whether that's invoked by the blender desktop service (or whatever you usually use to run it) you'll have to look up in /usr/share/applications/blender.desktop

I use sxhkd (Simple x hotkey deamon) for my application and it run quite nicely with that.

Thanks a lot for all the help that you gave.

People like you make using arch easy for new people like me.

Arch Forum rocks when it come to helping people.

Thank you "Seth", Take Care and Stay Safe.

Arch Linux

#1 2022-01-12 18:38:58

[SOLVED]Problem in using optimus manager and blender?

#2 2022-01-12 21:21:35

Re: [SOLVED]Problem in using optimus manager and blender?

#3 2022-01-13 07:46:57

Re: [SOLVED]Problem in using optimus manager and blender?

#4 2022-01-13 08:11:08

Re: [SOLVED]Problem in using optimus manager and blender?

#5 2022-01-13 08:27:45

Re: [SOLVED]Problem in using optimus manager and blender?

#6 2022-01-13 08:42:29

Re: [SOLVED]Problem in using optimus manager and blender?

#7 2022-01-13 10:05:20

Re: [SOLVED]Problem in using optimus manager and blender?

#8 2022-01-13 10:39:34

Re: [SOLVED]Problem in using optimus manager and blender?

#9 2022-01-13 11:19:32

Re: [SOLVED]Problem in using optimus manager and blender?

#10 2022-01-13 14:28:59

Re: [SOLVED]Problem in using optimus manager and blender?

#11 2022-01-13 15:16:28

Re: [SOLVED]Problem in using optimus manager and blender?

Board footer