You are not logged in.

Pages: 1

#1 2022-01-21 08:07:54

art
Member
Registered: 2019-08-12
Posts: 63

No sound: "Device or resource busy" when HDMI cable

How can I make sound on my notebook speaker when I plugin my monitors? When I plug in my two monitors, one with its sound speaker, into my Dell Latitude 5401 with inner card and speaker then no sound. One using HDMI cable and other using displayport adapter for VGA cable. I tried unmuting cards using alsamixer, tried changes configs and followed guides at https://wiki.archlinux.org/title/Advanc … leshooting but in vain so far. Occasionally it works when I change settings in pavucontrol but I don't know why or what settings effected. Also when I redirect sound to `plughw:1,3` (see below) it outputs that it plays the sound but I don't hear anything (my monitor speaker unmuted and set to 100).

It works only if I unplug HDMI cable and restart system.

❯ LANG=en aplay -D plughw:1,0 /usr/share/sounds/alsa/Front_Center.wav
aplay: main:831: audio open error: Device or resource busy

❯ LANG=en speaker-test

speaker-test 1.2.6

Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Playback open error: -16,Device or resource busy

❯ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
  Subdevices: 7/8
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
  Subdevice #4: subdevice #4
  Subdevice #5: subdevice #5
  Subdevice #6: subdevice #6
  Subdevice #7: subdevice #7
card 0: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
  Subdevices: 8/8
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
  Subdevice #4: subdevice #4
  Subdevice #5: subdevice #5
  Subdevice #6: subdevice #6
  Subdevice #7: subdevice #7
card 1: PCH [HDA Intel PCH], device 0: ALC3204 Analog [ALC3204 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

❯ cat .asoundrc
pcm.!default {
    type hw
    card PCH
}

ctl.!default {
    type hw
    card PCH
}

❯ cat .screenlayout/three-monitors.sh         #  This is how I turn three monitors
#!/bin/sh
xrandr --output eDP-1 --primary --mode 1920x1080 --pos 1080x0 --rotate normal --output DP-1 --mode 1920x1080 --pos 0x326 --rotate right --output HDMI-1 --off --output DP-2 --off --output HDMI-2 --off --output DP-3 --mode 1920x1080 --pos 1080x1080 --rotate normal

❯ spa -Q pulseaudio alsa-lib alsa-utils
pulseaudio 15.0-1
alsa-lib 1.2.6.1-1
alsa-utils 1.2.6-1

❯ uname -a
Linux ----- 5.15.13-arch1-1 #1 SMP PREEMPT Wed, 05 Jan 2022 16:20:59 +0000 x86_64 GNU/Linux

Last edited by art (2022-02-21 07:48:43)

Offline

#2 2022-01-21 09:20:58

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,017

Re: No sound: "Device or resource busy" when HDMI cable

Device busy is normal if something is already controlling your audio device, in this case likely pulseaudio is already playing something.

If you're using pulseaudio then you need to control things with pulseaudio to have consistent behaviours. Remove your asound.conf and install pulseaudio-alsa instead. then in such a non working situation while playing something you expect to hear post 

sudo fuser -v /dev/snd/*
pacmd list-cards
pacmd list-sinks
pacmd list-sink-inputs

Offline

#3 2022-01-22 08:33:13

art
Member
Registered: 2019-08-12
Posts: 63

Re: No sound: "Device or resource busy" when HDMI cable

V1del wrote:

Device busy is normal if something is already controlling your audio device, in this case likely pulseaudio is already playing something. ...

Thanks! After reboot today it works, there is sound in `cmus` I use to play music. And aplay and speaker-test works if I don't pass any params and it uses default. I don't know why. It now plays with "sink" with index 0 (see output below). But before that it didn't play when I chose different cards: it showed this progress bar changes in pavcontrol for loopback sink but for my card sink this progress bar "freezed" and no sound and cmus freezed at some second in a song.

Anyway I removed .asoundrc, installed pulseaudio-alsa. 

❯ LANG=en pacmd list-sinks
2 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9039
	volume: front-left: 19908 /  30% / -31.05 dB,   front-right: 19908 /  30% / -31.05 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 210.64 ms
	max request: 39 KiB
	max rewind: 39 KiB
	monitor source: 0
	sample spec: s16le 2-канальный 4800
	channel map: front-left,front-right
	             Стерео
	used by: 1
	linked by: 1
	configured latency: 210.00 ms; range is 0.50 .. 1837.50 ms
	card: 0 <alsa_card.pci-0000_00_1f.3>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC3204 Analog"
		alsa.id = "ALC3204 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xcc338000 irq 170"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.form_factor = "internal"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Аналоговый стерео"
		device.description = "Встроенное аудио Аналоговый стерео"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>
    index: 1
	name: <alsa_output.platform-snd_aloop.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9009
	volume: front-left: 30419 /  46% / -20.00 dB,   front-right: 30419 /  46% / -20.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 2
	sample spec: s16le 2-канальный 4410
	channel map: front-left,front-right
	             Стерео
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 1 <alsa_card.platform-snd_aloop.0>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "Loopback PCM"
		alsa.id = "Loopback PCM"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "Loopback"
		alsa.long_card_name = "Loopback 1"
		alsa.driver_name = "snd_aloop"
		device.bus_path = "platform-snd_aloop.0"
		sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "352800"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Аналоговый стерео"
		device.description = "Встроенное аудио Аналоговый стерео"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card"
	ports:
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-output>

Last edited by art (2022-01-22 08:35:00)

Offline

#4 2022-01-29 12:25:31

art
Member
Registered: 2019-08-12
Posts: 63

Re: No sound: "Device or resource busy" when HDMI cable

It seems installing puseaudio-alsa solves the issue. I didn't have 'no sound' issue since then

Offline

#5 2022-02-03 07:25:25

art
Member
Registered: 2019-08-12
Posts: 63

Re: No sound: "Device or resource busy" when HDMI cable

And yet it reproduced again. It now won't play from cmus or from firefox any sound. I start cmus, then command it to play mp3 file, it displays playing icon but seconds don't increase and no sound. The same for other applications (firefox): I press play, it won't increase seconds in a video or audio but freezes without any error message.

There is this error message in pulseaudio:

W: [alsa-sink-ALC3204 Analog] alsa-mixer.c: Failed to set switch of 'Speaker': Input/output error

Here is pulseaudio output:

❯ systemctl --user stop pulseaudio.socket
❯ systemctl --user stop pulseaudio.service
❯ LANG=en  pulseaudio -v
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 15.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is b783172a0c7a4f3cb5dfffffbea18a90.
I: [pulseaudio] main.c: Session ID is 1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/art/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-15.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: System supports high resolution timers
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] database.c: Successfully opened 'device-volumes' database file '/home/art/.config/pulse/b783172a0c7a4f3cb5dfffffbea18a90-device-volumes.tdb'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] database.c: Successfully opened 'stream-volumes' database file '/home/art/.config/pulse/b783172a0c7a4f3cb5dfffffbea18a90-stream-volumes.tdb'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] database.c: Successfully opened 'card-database' database file '/home/art/.config/pulse/b783172a0c7a4f3cb5dfffffbea18a90-card-database.tdb'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)parser.c: UCM is not supported for this HDA model (HDA Intel PCH at 0xcc338000 irq 170)
I: [pulseaudio] (alsa-lib)main.c: error: failed to import hw:1 use case configuration -6
I: [pulseaudio] (alsa-lib)parser.c: UCM is not supported for this HDA model (HDA Intel PCH at 0xcc338000 irq 170)
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA Intel PCH use case configuration -6
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA Intel PCH
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-linein.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-aux.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-video.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-fm.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output-lineout.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output-speaker.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output-headphones.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf
I: [pulseaudio] (alsa-lib)pcm_route.c: Found no matching channel map
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:1: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='surround40:1': Invalid argument
I: [pulseaudio] (alsa-lib)pcm_route.c: Found no matching channel map
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_route.c: Found no matching channel map
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='surround51:1': Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='surround71:1': Invalid argument
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/hdmi-output-0.conf
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1: No such file or directory
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/hdmi-output-1.conf
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,1: No such file or directory
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/hdmi-output-2.conf
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='hdmi:1,2': Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='hdmi:1,2': Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,2: No such file or directory
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/hdmi-output-3.conf
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,3: No such file or directory
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/hdmi-output-4.conf
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,6: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,7: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,8: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,8: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,8: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,8
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,8: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,9: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,9: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,9: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,9
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,9: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,10: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,10: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,10: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,10
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,10: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_00_1f.3.
I: [pulseaudio] card.c: alsa_card.pci-0000_00_1f.3: active_profile: output:analog-stereo+input:analog-stereo
I: [pulseaudio] module-card-restore.c: Profile 'output:analog-stereo+input:analog-stereo' was previously automatically selected for card alsa_card.pci-0000_00_1f.3.
I: [pulseaudio] module-card-restore.c: Restoring profile 'output:analog-stereo+input:analog-stereo' for card alsa_card.pci-0000_00_1f.3.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_00_1f.3"
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:1.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_00_1f.3.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_00_1f.3.analog-stereo: front-left: 6725 /  10%,   front-right: 6725 /  10%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink alsa_output.pci-0000_00_1f.3.analog-stereo: unmuted
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_00_1f.3.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c:     alsa.resolution_bits = "16"
I: [pulseaudio] sink.c:     device.api = "alsa"
I: [pulseaudio] sink.c:     device.class = "sound"
I: [pulseaudio] sink.c:     alsa.class = "generic"
I: [pulseaudio] sink.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c:     alsa.name = "ALC3204 Analog"
I: [pulseaudio] sink.c:     alsa.id = "ALC3204 Analog"
I: [pulseaudio] sink.c:     alsa.subdevice = "0"
I: [pulseaudio] sink.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c:     alsa.device = "0"
I: [pulseaudio] sink.c:     alsa.card = "1"
I: [pulseaudio] sink.c:     alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] sink.c:     alsa.long_card_name = "HDA Intel PCH at 0xcc338000 irq 170"
I: [pulseaudio] sink.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c:     device.bus_path = "pci-0000:00:1f.3"
I: [pulseaudio] sink.c:     sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card1"
I: [pulseaudio] sink.c:     device.bus = "pci"
I: [pulseaudio] sink.c:     device.vendor.id = "8086"
I: [pulseaudio] sink.c:     device.vendor.name = "Intel Corporation"
I: [pulseaudio] sink.c:     device.product.id = "a348"
I: [pulseaudio] sink.c:     device.product.name = "Cannon Lake PCH cAVS"
I: [pulseaudio] sink.c:     device.form_factor = "internal"
I: [pulseaudio] sink.c:     device.string = "front:1"
I: [pulseaudio] sink.c:     device.buffering.buffer_size = "352800"
I: [pulseaudio] sink.c:     device.buffering.fragment_size = "176400"
I: [pulseaudio] sink.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c:     device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c:     device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c:     device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] sink.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] module-device-restore.c: Restoring mute state for source alsa_output.pci-0000_00_1f.3.analog-stereo.monitor: unmuted
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_00_1f.3.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     device.description = "Monitor of Built-in Audio Analog Stereo"
I: [pulseaudio] source.c:     device.class = "monitor"
I: [pulseaudio] source.c:     alsa.card = "1"
I: [pulseaudio] source.c:     alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] source.c:     alsa.long_card_name = "HDA Intel PCH at 0xcc338000 irq 170"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:00:1f.3"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card1"
I: [pulseaudio] source.c:     device.bus = "pci"
I: [pulseaudio] source.c:     device.vendor.id = "8086"
I: [pulseaudio] source.c:     device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c:     device.product.id = "a348"
I: [pulseaudio] source.c:     device.product.name = "Cannon Lake PCH cAVS"
I: [pulseaudio] source.c:     device.form_factor = "internal"
I: [pulseaudio] source.c:     device.string = "1"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
W: [pulseaudio] alsa-mixer.c: Failed to set volume of 'Headphone': Input/output error
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -181.50 dB to 0.00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink-ALC3204 Analog] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-ALC3204 Analog] alsa-sink.c: Starting playback.
I: [pulseaudio] core.c: default_source: (unset) -> alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
I: [pulseaudio] core.c: default_sink: (unset) -> alsa_output.pci-0000_00_1f.3.analog-stereo
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-source.c: Successfully opened device front:1.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.pci-0000_00_1f.3.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_input.pci-0000_00_1f.3.analog-stereo: front-left: 8995 /  14%,   front-right: 8995 /  14%
I: [pulseaudio] module-device-restore.c: Restoring mute state for source alsa_input.pci-0000_00_1f.3.analog-stereo: unmuted
I: [pulseaudio] source.c: Created source 1 "alsa_input.pci-0000_00_1f.3.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     alsa.resolution_bits = "16"
I: [pulseaudio] source.c:     device.api = "alsa"
I: [pulseaudio] source.c:     device.class = "sound"
I: [pulseaudio] source.c:     alsa.class = "generic"
I: [pulseaudio] source.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] source.c:     alsa.name = "ALC3204 Analog"
I: [pulseaudio] source.c:     alsa.id = "ALC3204 Analog"
I: [pulseaudio] source.c:     alsa.subdevice = "0"
I: [pulseaudio] source.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c:     alsa.device = "0"
I: [pulseaudio] source.c:     alsa.card = "1"
I: [pulseaudio] source.c:     alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] source.c:     alsa.long_card_name = "HDA Intel PCH at 0xcc338000 irq 170"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:00:1f.3"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card1"
I: [pulseaudio] source.c:     device.bus = "pci"
I: [pulseaudio] source.c:     device.vendor.id = "8086"
I: [pulseaudio] source.c:     device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c:     device.product.id = "a348"
I: [pulseaudio] source.c:     device.product.name = "Cannon Lake PCH cAVS"
I: [pulseaudio] source.c:     device.form_factor = "internal"
I: [pulseaudio] source.c:     device.string = "front:1"
I: [pulseaudio] source.c:     device.buffering.buffer_size = "352800"
I: [pulseaudio] source.c:     device.buffering.fragment_size = "176400"
I: [pulseaudio] source.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] source.c:     device.profile.name = "analog-stereo"
I: [pulseaudio] source.c:     device.profile.description = "Analog Stereo"
I: [pulseaudio] source.c:     device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-source.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from -17.25 dB to 60.00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -60.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
I: [alsa-source-ALC3204 Analog] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-ALC3204 Analog] alsa-source.c: Starting capture.
I: [pulseaudio] core.c: default_source: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor -> alsa_input.pci-0000_00_1f.3.analog-stereo
I: [pulseaudio] module-alsa-card.c: ELD device found for port hdmi-output-0 (3).
I: [pulseaudio] module-alsa-card.c: ELD device found for port hdmi-output-1 (7).
I: [pulseaudio] module-alsa-card.c: ELD device found for port hdmi-output-2 (8).
I: [pulseaudio] module-alsa-card.c: ELD device found for port hdmi-output-3 (9).
I: [pulseaudio] module-alsa-card.c: ELD device found for port hdmi-output-4 (10).
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_00_1f.3" card_name="alsa_card.pci-0000_00_1f.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1f.3/sound/card1 (alsa_card.pci-0000_00_1f.3) module loaded.
I: [pulseaudio] (alsa-lib)main.c: error: failed to import hw:0 use case configuration -2
I: [pulseaudio] (alsa-lib)main.c: error: failed to import Loopback use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card Loopback
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-linein.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-aux.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-video.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-fm.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.iec958.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:0
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output-lineout.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output-speaker.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output-headphones.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.iec958.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:0
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.iec958.0:CARD=0,AES0=6,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:{AES0 0x6 AES1 0x82 AES2 0x0 AES3 0x2 CARD 0}
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.iec958.0:CARD=0,AES0=6,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:{AES0 0x6 AES1 0x82 AES2 0x0 AES3 0x2 CARD 0}
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.1:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.1:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.1:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.2:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.2:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.2:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.3:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.3:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.3:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.4:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.4:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.4:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,4: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.5:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.5:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.5:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.6:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.6:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.6:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.7:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.7:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.7:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.8:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,8
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,8: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.8:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,8
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,8: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.8:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,8
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,8: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,8
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,8: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.9:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,9
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,9: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.9:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,9
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,9: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.9:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,9
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,9: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,9
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,9: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.10:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,10
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,10: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.10:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,10
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,10: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.0.pcm.hdmi.10:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,10
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,10: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,10
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,10: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.platform-snd_aloop.0.
I: [pulseaudio] card.c: alsa_card.platform-snd_aloop.0: active_profile: output:analog-stereo+input:analog-stereo
I: [pulseaudio] module-card-restore.c: Profile 'output:analog-stereo+input:analog-stereo' was previously automatically selected for card alsa_card.platform-snd_aloop.0.
I: [pulseaudio] module-card-restore.c: Restoring profile 'output:analog-stereo+input:analog-stereo' for card alsa_card.platform-snd_aloop.0.
I: [pulseaudio] card.c: Created 1 "alsa_card.platform-snd_aloop.0"
I: [pulseaudio] alsa-util.c: Cannot disable ALSA period wakeups
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:0.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.platform-snd_aloop.0.analog-stereo: front-left: 30419 /  46%,   front-right: 30419 /  46%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink alsa_output.platform-snd_aloop.0.analog-stereo: unmuted
I: [pulseaudio] sink.c: Created sink 1 "alsa_output.platform-snd_aloop.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c:     alsa.resolution_bits = "16"
I: [pulseaudio] sink.c:     device.api = "alsa"
I: [pulseaudio] sink.c:     device.class = "sound"
I: [pulseaudio] sink.c:     alsa.class = "generic"
I: [pulseaudio] sink.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c:     alsa.name = "Loopback PCM"
I: [pulseaudio] sink.c:     alsa.id = "Loopback PCM"
I: [pulseaudio] sink.c:     alsa.subdevice = "0"
I: [pulseaudio] sink.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c:     alsa.device = "0"
I: [pulseaudio] sink.c:     alsa.card = "0"
I: [pulseaudio] sink.c:     alsa.card_name = "Loopback"
I: [pulseaudio] sink.c:     alsa.long_card_name = "Loopback 1"
I: [pulseaudio] sink.c:     alsa.driver_name = "snd_aloop"
I: [pulseaudio] sink.c:     device.bus_path = "platform-snd_aloop.0"
I: [pulseaudio] sink.c:     sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
I: [pulseaudio] sink.c:     device.form_factor = "internal"
I: [pulseaudio] sink.c:     device.string = "front:0"
I: [pulseaudio] sink.c:     device.buffering.buffer_size = "352800"
I: [pulseaudio] sink.c:     device.buffering.fragment_size = "352800"
I: [pulseaudio] sink.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c:     device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c:     device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c:     device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] sink.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c:     device.icon_name = "audio-card"
I: [pulseaudio] source.c: Created source 2 "alsa_output.platform-snd_aloop.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     device.description = "Monitor of Built-in Audio Analog Stereo"
I: [pulseaudio] source.c:     device.class = "monitor"
I: [pulseaudio] source.c:     alsa.card = "0"
I: [pulseaudio] source.c:     alsa.card_name = "Loopback"
I: [pulseaudio] source.c:     alsa.long_card_name = "Loopback 1"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_aloop"
I: [pulseaudio] source.c:     device.bus_path = "platform-snd_aloop.0"
I: [pulseaudio] source.c:     sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
I: [pulseaudio] source.c:     device.form_factor = "internal"
I: [pulseaudio] source.c:     device.string = "0"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card"
I: [pulseaudio] alsa-sink.c: Using 1.0 fragments of size 352800 bytes (2000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -51.00 dB to 0.00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
I: [alsa-sink-Loopback PCM] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-Loopback PCM] alsa-sink.c: Starting playback.
I: [pulseaudio] alsa-util.c: Cannot disable ALSA period wakeups
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-source.c: Successfully opened device front:0.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_input.platform-snd_aloop.0.analog-stereo: front-left: 65536 / 100%,   front-right: 65536 / 100%
I: [pulseaudio] module-device-restore.c: Restoring mute state for source alsa_input.platform-snd_aloop.0.analog-stereo: unmuted
I: [pulseaudio] source.c: Created source 3 "alsa_input.platform-snd_aloop.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     alsa.resolution_bits = "16"
I: [pulseaudio] source.c:     device.api = "alsa"
I: [pulseaudio] source.c:     device.class = "sound"
I: [pulseaudio] source.c:     alsa.class = "generic"
I: [pulseaudio] source.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] source.c:     alsa.name = "Loopback PCM"
I: [pulseaudio] source.c:     alsa.id = "Loopback PCM"
I: [pulseaudio] source.c:     alsa.subdevice = "0"
I: [pulseaudio] source.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c:     alsa.device = "0"
I: [pulseaudio] source.c:     alsa.card = "0"
I: [pulseaudio] source.c:     alsa.card_name = "Loopback"
I: [pulseaudio] source.c:     alsa.long_card_name = "Loopback 1"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_aloop"
I: [pulseaudio] source.c:     device.bus_path = "platform-snd_aloop.0"
I: [pulseaudio] source.c:     sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
I: [pulseaudio] source.c:     device.form_factor = "internal"
I: [pulseaudio] source.c:     device.string = "front:0"
I: [pulseaudio] source.c:     device.buffering.buffer_size = "352800"
I: [pulseaudio] source.c:     device.buffering.fragment_size = "352800"
I: [pulseaudio] source.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] source.c:     device.profile.name = "analog-stereo"
I: [pulseaudio] source.c:     device.profile.description = "Analog Stereo"
I: [pulseaudio] source.c:     device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card"
I: [pulseaudio] alsa-source.c: Using 1.0 fragments of size 352800 bytes (2000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-source.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-source.c: Driver does not support hardware mute control, falling back to software mute control.
I: [alsa-source-Loopback PCM] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-Loopback PCM] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="0" name="platform-snd_aloop.0" card_name="alsa_card.platform-snd_aloop.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/platform/snd_aloop.0/sound/card0 (alsa_card.platform-snd_aloop.0) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 2 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-gsettings" (index: #13; argument: "").
I: [pulseaudio] module-default-device-restore.c: Restoring default sink 'alsa_output.pci-0000_00_1f.3.analog-stereo'.
I: [pulseaudio] core.c: configured_default_sink: (unset) -> alsa_output.pci-0000_00_1f.3.analog-stereo
I: [pulseaudio] module-default-device-restore.c: Restoring default source 'alsa_input.platform-snd_aloop.0.analog-stereo'.
I: [pulseaudio] core.c: configured_default_source: (unset) -> alsa_input.platform-snd_aloop.0.analog-stereo
I: [pulseaudio] core.c: default_source: alsa_input.pci-0000_00_1f.3.analog-stereo -> alsa_input.platform-snd_aloop.0.analog-stereo
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #14; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #18; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session 1"
I: [pulseaudio] core.c: exit_idle_time: 20 -> 0
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #19; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #21; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #23; argument: "").
W: [pulseaudio] cli-command.c: stat('/etc/pulse/default.pa.d'): No such file or directory
I: [pulseaudio] main.c: Daemon startup complete.
I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] client.c: Created 5 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] client.c: Created 6 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 0 "Детектирование пиков" on alsa_output.pci-0000_00_1f.3.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Детектирование пиков"
I: [pulseaudio] source-output.c:     application.name = "Регулятор громкости PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "35"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "5.0"
I: [pulseaudio] source-output.c:     application.process.id = "879543"
I: [pulseaudio] source-output.c:     application.process.user = "art"
I: [pulseaudio] source-output.c:     application.process.host = "ARCHPC"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "ru_RU.utf8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
I: [pulseaudio] source-output.c:     application.process.session_id = "1"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80.00 ms = 40.00 ms + 40.00 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 1 "Детектирование пиков" on alsa_input.pci-0000_00_1f.3.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Детектирование пиков"
I: [pulseaudio] source-output.c:     application.name = "Регулятор громкости PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "35"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "5.0"
I: [pulseaudio] source-output.c:     application.process.id = "879543"
I: [pulseaudio] source-output.c:     application.process.user = "art"
I: [pulseaudio] source-output.c:     application.process.host = "ARCHPC"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "ru_RU.utf8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
I: [pulseaudio] source-output.c:     application.process.session_id = "1"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80.00 ms = 40.00 ms + 40.00 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 2 "Детектирование пиков" on alsa_output.platform-snd_aloop.0.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Детектирование пиков"
I: [pulseaudio] source-output.c:     application.name = "Регулятор громкости PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "35"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "5.0"
I: [pulseaudio] source-output.c:     application.process.id = "879543"
I: [pulseaudio] source-output.c:     application.process.user = "art"
I: [pulseaudio] source-output.c:     application.process.host = "ARCHPC"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "ru_RU.utf8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
I: [pulseaudio] source-output.c:     application.process.session_id = "1"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80.00 ms = 40.00 ms + 40.00 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 3 "Детектирование пиков" on alsa_input.platform-snd_aloop.0.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Детектирование пиков"
I: [pulseaudio] source-output.c:     application.name = "Регулятор громкости PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "35"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "5.0"
I: [pulseaudio] source-output.c:     application.process.id = "879543"
I: [pulseaudio] source-output.c:     application.process.user = "art"
I: [pulseaudio] source-output.c:     application.process.host = "ARCHPC"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "ru_RU.utf8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
I: [pulseaudio] source-output.c:     application.process.session_id = "1"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80.00 ms = 40.00 ms + 40.00 ms
I: [alsa-source-Loopback PCM] alsa-source.c: Increasing wakeup watermark to 30.00 ms
I: [pulseaudio] client.c: Created 7 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] sink-input.c: Trying to change sample spec
I: [pulseaudio] sink.c: Cannot update sample spec, monitor source is RUNNING
I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-media-role:music.
I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-media-role:music.
I: [pulseaudio] speex.c: Choosing speex quality setting 1.
I: [pulseaudio] sink-input.c: Created input 0 "playback" on alsa_output.pci-0000_00_1f.3.analog-stereo with sample spec s16le 2ch 48000Hz and channel map front-left,front-right
I: [pulseaudio] sink-input.c:     media.role = "music"
I: [pulseaudio] sink-input.c:     media.icon_name = "audio-x-generic"
I: [pulseaudio] sink-input.c:     media.name = "playback"
I: [pulseaudio] sink-input.c:     application.name = "C* Music Player"
I: [pulseaudio] sink-input.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c:     native-protocol.version = "35"
I: [pulseaudio] sink-input.c:     application.version = "v2.9.1"
I: [pulseaudio] sink-input.c:     application.process.id = "884138"
I: [pulseaudio] sink-input.c:     application.process.user = "art"
I: [pulseaudio] sink-input.c:     application.process.host = "ARCHPC"
I: [pulseaudio] sink-input.c:     application.process.binary = "cmus"
I: [pulseaudio] sink-input.c:     application.language = "C"
I: [pulseaudio] sink-input.c:     window.x11.display = ":0"
I: [pulseaudio] sink-input.c:     application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
I: [pulseaudio] sink-input.c:     application.process.session_id = "1"
I: [pulseaudio] sink-input.c:     module-stream-restore.id = "sink-input-by-media-role:music"
I: [pulseaudio] protocol-native.c: Requested tlength=250.00 ms, minreq=20.00 ms
I: [pulseaudio] protocol-native.c: Final latency 460.00 ms = 210.00 ms + 2*20.00 ms + 210.00 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source.c: Cannot update sample spec, SOURCE_IS_RUNNING, will keep using s16le and 44100 Hz
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 4 "Детектирование пиков" on alsa_output.pci-0000_00_1f.3.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Детектирование пиков"
I: [pulseaudio] source-output.c:     application.name = "Регулятор громкости PulseAudio"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "35"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "5.0"
I: [pulseaudio] source-output.c:     application.process.id = "879543"
I: [pulseaudio] source-output.c:     application.process.user = "art"
I: [pulseaudio] source-output.c:     application.process.host = "ARCHPC"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "ru_RU.utf8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
I: [pulseaudio] source-output.c:     application.process.session_id = "1"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 80.00 ms = 40.00 ms + 40.00 ms
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_1f.3.analog-stereo:analog-output-speaker.
W: [alsa-sink-ALC3204 Analog] alsa-mixer.c: Failed to set switch of 'Speaker': Input/output error
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_1f.3.analog-stereo:analog-output-speaker.
I: [pulseaudio] module-device-restore.c: Synced.
I: [pulseaudio] client.c: Created 8 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] client.c: Freed 8 "Termite"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 9 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] client.c: Created 10 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] client.c: Freed 10 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 11 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_1f.3.analog-stereo:analog-output-speaker.
I: [pulseaudio] client.c: Freed 11 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Created 12 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
W: [alsa-sink-ALC3204 Analog] alsa-mixer.c: Failed to set switch of 'Speaker': Input/output error
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_1f.3.analog-stereo:analog-output-speaker.
I: [pulseaudio] client.c: Freed 12 "ALSA plug-in [amixer]"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] module-device-restore.c: Synced.
I: [pulseaudio] sink.c: Cannot update sample spec, monitor source is RUNNING

Here is pulseaudio info:

Memory blocks currently allocated: 25, size: 176.8 Ки.
Memory blocks allocated during the whole lifetime: 30217, size: 71.6 МиÐ.
Memory blocks imported from other processes: 12, size: 54.4 КиÐ.
Memory blocks exported to other processes: 0, size: 0 Б.
Total sample cache size: 11.5 КиÐ.
Default sample spec: s16le 2-канальный 4410
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_00_1f.3.analog-stereo
Default source name: alsa_input.platform-snd_aloop.0.analog-stereo
Memory blocks of type POOL: 10 allocated/10323 accumulated.
Memory blocks of type POOL_EXTERNAL: 3 allocated/9888 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/19825 accumulated.
Memory blocks of type IMPORTED: 12 allocated/69 accumulated.
25 module(s) loaded.
    index: 0
	name: <module-device-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute state of devices"
		module.version = "15.0"
    index: 1
	name: <module-stream-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.version = "15.0"
    index: 2
	name: <module-card-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore profile of cards"
		module.version = "15.0"
    index: 3
	name: <module-augment-properties>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Augment the property sets of streams with additional static information"
		module.version = "15.0"
    index: 4
	name: <module-switch-on-port-available>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "David Henningsson"
		module.description = "Switches ports and profiles when devices are plugged/unplugged"
		module.version = "15.0"
    index: 5
	name: <module-udev-detect>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Detect available audio hardware and load matching drivers"
		module.version = "15.0"
    index: 6
	name: <module-alsa-card>
	argument: <device_id="1" name="pci-0000_00_1f.3" card_name="alsa_card.pci-0000_00_1f.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1">
	used: 7
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "15.0"
    index: 7
	name: <module-alsa-card>
	argument: <device_id="0" name="platform-snd_aloop.0" card_name="alsa_card.platform-snd_aloop.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1">
	used: 3
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "15.0"
    index: 8
	name: <module-bluetooth-policy>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Frédéric Dalleau, Pali Rohár"
		module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
		module.version = "15.0"
    index: 9
	name: <module-bluetooth-discover>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "João Paulo Rechi Vita"
		module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
		module.version = "15.0"
    index: 10
	name: <module-bluez5-discover>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "João Paulo Rechi Vita"
		module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
		module.version = "15.0"
    index: 11
	name: <module-dbus-protocol>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Tanu Kaskinen"
		module.description = "D-Bus interface"
		module.version = "15.0"
    index: 12
	name: <module-native-protocol-unix>
	argument: <>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Native protocol (UNIX sockets)"
		module.version = "15.0"
    index: 13
	name: <module-gsettings>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Sylvain Baubeau"
		module.description = "GSettings Adapter"
		module.version = "15.0"
    index: 14
	name: <module-default-device-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the default sink and source"
		module.version = "15.0"
    index: 15
	name: <module-always-sink>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Всегда оставлять хотя бы один аудиоприёмник загруженным, даже если он пустой."
		module.version = "15.0"
    index: 16
	name: <module-intended-roles>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically set device of streams based on intended roles of devices"
		module.version = "15.0"
    index: 17
	name: <module-suspend-on-idle>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is idle for too long, suspend it"
		module.version = "15.0"
    index: 18
	name: <module-console-kit>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each ConsoleKit session of this user"
		module.version = "15.0"
    index: 19
	name: <module-systemd-login>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each login session of this user"
		module.version = "15.0"
    index: 20
	name: <module-position-event-sounds>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
		module.version = "15.0"
    index: 21
	name: <module-role-cork>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Mute & cork streams with certain roles while others exist"
		module.version = "15.0"
    index: 22
	name: <module-filter-heuristics>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Detect when various filters are desirable"
		module.version = "15.0"
    index: 23
	name: <module-filter-apply>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Load filter sinks automatically when needed"
		module.version = "15.0"
    index: 24
	name: <module-cli-protocol-unix>
	argument: <>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Command line interface protocol (UNIX sockets)"
		module.version = "15.0"
2 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9039
	volume: front-left: 6725 /  10% / -59.33 dB,   front-right: 6725 /  10% / -59.33 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 6 KiB
	max rewind: 6 KiB
	monitor source: 0
	sample spec: s16le 2-канальный 4410
	channel map: front-left,front-right
	             Стерео
	used by: 2
	linked by: 4
	configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
	card: 0 <alsa_card.pci-0000_00_1f.3>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC3204 Analog"
		alsa.id = "ALC3204 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xcc338000 irq 170"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.form_factor = "internal"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Аналоговый стерео"
		device.description = "Встроенное аудио Аналоговый стерео"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>
    index: 1
	name: <alsa_output.platform-snd_aloop.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9009
	volume: front-left: 30419 /  46% / -20.00 dB,   front-right: 30419 /  46% / -20.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 37.53 ms
	max request: 6 KiB
	max rewind: 6 KiB
	monitor source: 2
	sample spec: s16le 2-канальный 4410
	channel map: front-left,front-right
	             Стерео
	used by: 0
	linked by: 1
	configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
	card: 1 <alsa_card.platform-snd_aloop.0>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "Loopback PCM"
		alsa.id = "Loopback PCM"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "Loopback"
		alsa.long_card_name = "Loopback 1"
		alsa.driver_name = "snd_aloop"
		device.bus_path = "platform-snd_aloop.0"
		sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "352800"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Аналоговый стерео"
		device.description = "Встроенное аудио Аналоговый стерео"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card"
	ports:
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-output>
4 source(s) available.
    index: 0
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 9746.46 ms
	max rewind: 6 KiB
	sample spec: s16le 2-канальный 4410
	channel map: front-left,front-right
	             Стерео
	used by: 2
	linked by: 2
	configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
	monitor_of: 0
	card: 0 <alsa_card.pci-0000_00_1f.3>
	module: 6
	properties:
		device.description = "Monitor of Встроенное аудио Аналоговый стерео"
		device.class = "monitor"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xcc338000 irq 170"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.form_factor = "internal"
		device.string = "1"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 1
	name: <alsa_input.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9039
	volume: front-left: 8995 /  14% / -51.75 dB,   front-right: 8995 /  14% / -51.75 dB
	        balance 0.00
	base volume: 6554 /  10% / -60.00 dB
	volume steps: 65537
	muted: no
	current latency: 197690.97 ms
	max rewind: 0 KiB
	sample spec: s16le 2-канальный 4410
	channel map: front-left,front-right
	             Стерео
	used by: 1
	linked by: 1
	configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
	card: 0 <alsa_card.pci-0000_00_1f.3>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC3204 Analog"
		alsa.id = "ALC3204 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xcc338000 irq 170"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.form_factor = "internal"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Аналоговый стерео"
		device.description = "Встроенное аудио Аналоговый стерео"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-headphone-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input-internal-mic>
    index: 2
	name: <alsa_output.platform-snd_aloop.0.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 1000
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 6 KiB
	sample spec: s16le 2-канальный 4410
	channel map: front-left,front-right
	             Стерео
	used by: 1
	linked by: 1
	configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
	monitor_of: 1
	card: 1 <alsa_card.platform-snd_aloop.0>
	module: 7
	properties:
		device.description = "Monitor of Встроенное аудио Аналоговый стерео"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "Loopback"
		alsa.long_card_name = "Loopback 1"
		alsa.driver_name = "snd_aloop"
		device.bus_path = "platform-snd_aloop.0"
		sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
		device.form_factor = "internal"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card"
  * index: 3
	name: <alsa_input.platform-snd_aloop.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9009
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 1.13 ms
	max rewind: 0 KiB
	sample spec: s16le 2-канальный 4410
	channel map: front-left,front-right
	             Стерео
	used by: 1
	linked by: 1
	configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
	card: 1 <alsa_card.platform-snd_aloop.0>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "Loopback PCM"
		alsa.id = "Loopback PCM"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "Loopback"
		alsa.long_card_name = "Loopback 1"
		alsa.driver_name = "snd_aloop"
		device.bus_path = "platform-snd_aloop.0"
		sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "352800"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Аналоговый стерео"
		device.description = "Встроенное аудио Аналоговый стерео"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card"
	ports:
		analog-input: Analog Input (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-input>
14 client(s) logged in.
    index: 0
	driver: <module-systemd-login.c>
	owner module: 19
	properties:
		application.name = "Login Session 1"
		systemd-login.session = "1"
    index: 1
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "PulseAudio System Tray"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.process.id = "788"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "pasystray"
		application.language = "ru_RU.utf8"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		application.icon_name = "pasystray"
    index: 2
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "redshift-gtk"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.process.id = "41712"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "python3.10"
		application.language = "ru_RU.utf8"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
    index: 3
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "xfce4-power-manager"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.icon_name = "xfce4-power-manager-settings"
		application.process.id = "794"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "xfce4-power-manager"
		application.language = "ru_RU.utf8"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
    index: 4
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "Firefox"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.process.id = "827541"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "firefox"
		application.language = "ru_RU.utf8"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		application.icon_name = "firefox"
    index: 5
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "Termite"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.process.id = "876045"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "termite"
		application.language = "ru_RU.utf8"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		application.icon_name = "utilities-terminal"
    index: 6
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "Firefox"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.version = "95.0.2"
		application.icon_name = "firefox"
		application.process.id = "827541"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "firefox"
		application.language = "ru_RU.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
    index: 7
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "PulseAudio systray"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.process.id = "788"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "pasystray"
		application.language = "ru_RU.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		application.icon_name = "pasystray"
    index: 8
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "Регулятор громкости PulseAudio"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "5.0"
		application.process.id = "879543"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "pavucontrol"
		application.language = "ru_RU.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
    index: 9
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		window.x11.display = ":0"
		window.x11.screen = "0"
		application.process.id = "879543"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "pavucontrol"
		application.language = "ru_RU.utf8"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		application.icon_name = "multimedia-volume-control"
    index: 10
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "C* Music Player"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.version = "v2.9.1"
		application.process.id = "876133"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "cmus"
		application.language = "C"
		window.x11.display = ":0"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
    index: 11
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "Аплет NetworkManager"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.icon_name = "network-workgroup"
		application.process.id = "786"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "nm-applet"
		application.language = "ru_RU.utf8"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
    index: 12
	driver: <protocol-native.c>
	owner module: 12
	properties:
		application.name = "Termite"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.process.id = "881069"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "termite"
		application.language = "ru_RU.utf8"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		application.icon_name = "utilities-terminal"
    index: 13
	driver: <cli.c>
	owner module: 24
	properties:
		application.name = "UNIX socket client"
2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1f.3>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xcc338000 irq 170"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.form_factor = "internal"
		device.string = "1"
		device.description = "Встроенное аудио"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Аналоговый стерео вход (priority 32833, available: unknown)
		output:analog-stereo: Аналоговый стерео выход (priority 39268, available: unknown)
		output:analog-stereo+input:analog-stereo: Аналоговый стерео дуплекс (priority 39333, available: unknown)
		output:hdmi-stereo: Digital Stereo (HDMI) выход (priority 5900, available: no)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) выход + Аналоговый стерео вход (priority 5965, available: unknown)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) выход (priority 800, available: no)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) выход + Аналоговый стерео вход (priority 865, available: unknown)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) выход (priority 800, available: no)
		output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) выход + Аналоговый стерео вход (priority 865, available: unknown)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) выход (priority 5700, available: no)
		output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) выход + Аналоговый стерео вход (priority 5765, available: unknown)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) выход (priority 600, available: no)
		output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) выход + Аналоговый стерео вход (priority 665, available: unknown)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) выход (priority 600, available: no)
		output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) выход + Аналоговый стерео вход (priority 665, available: unknown)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) выход (priority 38468, available: unknown)
		output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) выход + Аналоговый стерео вход (priority 38533, available: unknown)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) выход (priority 5700, available: no)
		output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) выход + Аналоговый стерео вход (priority 5765, available: unknown)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) выход (priority 600, available: no)
		output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) выход + Аналоговый стерео вход (priority 665, available: unknown)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) выход (priority 600, available: no)
		output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) выход + Аналоговый стерео вход (priority 665, available: unknown)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) выход (priority 5700, available: no)
		output:hdmi-stereo-extra4+input:analog-stereo: Digital Stereo (HDMI 5) выход + Аналоговый стерео вход (priority 5765, available: unknown)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) выход (priority 600, available: no)
		output:hdmi-surround-extra4+input:analog-stereo: Digital Surround 5.1 (HDMI 5) выход + Аналоговый стерео вход (priority 665, available: unknown)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) выход (priority 600, available: no)
		output:hdmi-surround71-extra4+input:analog-stereo: Digital Surround 7.1 (HDMI 5) выход + Аналоговый стерео вход (priority 665, available: unknown)
		off: Выключено (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1f.3.analog-stereo/#0: Встроенное аудио Аналоговый стерео
	sources:
		alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#0: Monitor of Встроенное аудио Аналоговый стерео
		alsa_input.pci-0000_00_1f.3.analog-stereo/#1: Встроенное аудио Аналоговый стерео
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-headphone-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-headphones"
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "BenQ GW2760HS"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.platform-snd_aloop.0>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "0"
		alsa.card_name = "Loopback"
		alsa.long_card_name = "Loopback 1"
		alsa.driver_name = "snd_aloop"
		device.bus_path = "platform-snd_aloop.0"
		sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Встроенное аудио"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card"
	profiles:
		input:analog-stereo: Аналоговый стерео вход (priority 65, available: unknown)
		output:analog-stereo: Аналоговый стерео выход (priority 6500, available: unknown)
		output:analog-stereo+input:analog-stereo: Аналоговый стерео дуплекс (priority 6565, available: unknown)
		output:analog-surround-21: Аналоговый объёмный 2.1 выход (priority 1300, available: unknown)
		output:analog-surround-21+input:analog-stereo: Аналоговый объёмный 2.1 выход + Аналоговый стерео вход (priority 1365, available: unknown)
		output:analog-surround-40: Аналоговый объёмный 4.0 выход (priority 1200, available: unknown)
		output:analog-surround-40+input:analog-stereo: Аналоговый объёмный 4.0 выход + Аналоговый стерео вход (priority 1265, available: unknown)
		output:analog-surround-41: Аналоговый объёмный 4.1 выход (priority 1300, available: unknown)
		output:analog-surround-41+input:analog-stereo: Аналоговый объёмный 4.1 выход + Аналоговый стерео вход (priority 1365, available: unknown)
		output:analog-surround-50: Аналоговый объёмный 5.0 выход (priority 1200, available: unknown)
		output:analog-surround-50+input:analog-stereo: Аналоговый объёмный 5.0 выход + Аналоговый стерео вход (priority 1265, available: unknown)
		output:analog-surround-51: Аналоговый объёмный 5.1 выход (priority 1300, available: unknown)
		output:analog-surround-51+input:analog-stereo: Аналоговый объёмный 5.1 выход + Аналоговый стерео вход (priority 1365, available: unknown)
		output:analog-surround-71: Analog Surround 7.1 выход (priority 1200, available: unknown)
		output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 выход + Аналоговый стерео вход (priority 1265, available: unknown)
		off: Выключено (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.platform-snd_aloop.0.analog-stereo/#1: Встроенное аудио Аналоговый стерео
	sources:
		alsa_output.platform-snd_aloop.0.analog-stereo.monitor/#2: Monitor of Встроенное аудио Аналоговый стерео
		alsa_input.platform-snd_aloop.0.analog-stereo/#3: Встроенное аудио Аналоговый стерео
	ports:
		analog-input: Analog Input (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
2 sink input(s) available.
    index: 0
	driver: <protocol-native.c>
	flags: 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_00_1f.3.analog-stereo>
	volume: front-left: 46425 /  71% / -8.98 dB,   front-right: 46425 /  71% / -8.98 dB
	        balance 0.00
	muted: no
	current latency: 274.69 ms
	requested latency: 210.00 ms
	sample spec: s16le 2-канальный 4800
	channel map: front-left,front-right
	             Стерео
	resample method: speex-float-1
	module: 12
	client: 10 <C* Music Player>
	properties:
		media.role = "music"
		media.icon_name = "audio-x-generic"
		media.name = "playback"
		application.name = "C* Music Player"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.version = "v2.9.1"
		application.process.id = "876133"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "cmus"
		application.language = "C"
		window.x11.display = ":0"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		module-stream-restore.id = "sink-input-by-media-role:music"
    index: 1
	driver: <play-memblockq.c>
	flags: NO_CREATE_SUSPEND KILL_ON_SUSPEND 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_00_1f.3.analog-stereo>
	volume: front-left: 65123 /  99% / -0.16 dB,   front-right: 65123 /  99% / -0.16 dB
	        balance 0.00
	muted: no
	current latency: 0.00 ms
	requested latency: n/a
	sample spec: s16le 2-канальный 4410
	channel map: front-left,front-right
	             Стерео
	resample method: (null)
	properties:
		media.name = "audio-volume-change"
		event.id = "audio-volume-change"
		media.role = "event"
		event.description = "Звуковая индикация громкости"
		media.filename = "/usr/share/sounds/freedesktop/stereo/audio-volume-change.oga"
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		window.x11.display = ":0"
		window.x11.screen = "0"
		application.process.id = "879543"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "pavucontrol"
		application.language = "ru_RU.utf8"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		application.icon_name = "multimedia-volume-control"
		window.vpos = "0.248"
		window.hpos = "0.680"
		window.height = "1021"
		window.width = "1896"
		window.y = "47"
		window.x = "1092"
		window.x11.monitor = "0"
		window.desktop = "0"
		window.x11.xid = "35651591"
		window.icon_name = "multimedia-volume-control"
		window.id = "Громкость"
		window.name = "Громкость"
		module-stream-restore.id = "sink-input-by-media-role:event"
5 source output(s) available.
    index: 0
	driver: <protocol-native.c>
	flags: DONT_MOVE 
	state: RUNNING
	source: 0 <alsa_output.pci-0000_00_1f.3.analog-stereo.monitor>
	volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 0.00 ms
	requested latency: 40.00 ms
	sample spec: float32le 1-канальный 
	channel map: mono
	             Моно
	resample method: peaks
	owner module: 12
	client: 8 <Регулятор громкости PulseAudio>
	properties:
		media.name = "Детектирование пиков"
		application.name = "Регулятор громкости PulseAudio"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "5.0"
		application.process.id = "879543"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "pavucontrol"
		application.language = "ru_RU.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 1
	driver: <protocol-native.c>
	flags: DONT_MOVE 
	state: RUNNING
	source: 1 <alsa_input.pci-0000_00_1f.3.analog-stereo>
	volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 0.00 ms
	requested latency: 40.00 ms
	sample spec: float32le 1-канальный 
	channel map: mono
	             Моно
	resample method: peaks
	owner module: 12
	client: 8 <Регулятор громкости PulseAudio>
	properties:
		media.name = "Детектирование пиков"
		application.name = "Регулятор громкости PulseAudio"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "5.0"
		application.process.id = "879543"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "pavucontrol"
		application.language = "ru_RU.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 2
	driver: <protocol-native.c>
	flags: DONT_MOVE 
	state: RUNNING
	source: 2 <alsa_output.platform-snd_aloop.0.analog-stereo.monitor>
	volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 24.58 ms
	requested latency: 40.00 ms
	sample spec: float32le 1-канальный 
	channel map: mono
	             Моно
	resample method: peaks
	owner module: 12
	client: 8 <Регулятор громкости PulseAudio>
	properties:
		media.name = "Детектирование пиков"
		application.name = "Регулятор громкости PulseAudio"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "5.0"
		application.process.id = "879543"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "pavucontrol"
		application.language = "ru_RU.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 3
	driver: <protocol-native.c>
	flags: DONT_MOVE 
	state: RUNNING
	source: 3 <alsa_input.platform-snd_aloop.0.analog-stereo>
	volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 0.00 ms
	requested latency: 40.00 ms
	sample spec: float32le 1-канальный 
	channel map: mono
	             Моно
	resample method: peaks
	owner module: 12
	client: 8 <Регулятор громкости PulseAudio>
	properties:
		media.name = "Детектирование пиков"
		application.name = "Регулятор громкости PulseAudio"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "5.0"
		application.process.id = "879543"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "pavucontrol"
		application.language = "ru_RU.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 6
	driver: <protocol-native.c>
	flags: DONT_MOVE 
	state: RUNNING
	source: 0 <alsa_output.pci-0000_00_1f.3.analog-stereo.monitor>
	volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 0.00 ms
	requested latency: 40.00 ms
	sample spec: float32le 1-канальный 
	channel map: mono
	             Моно
	resample method: peaks
	owner module: 12
	client: 8 <Регулятор громкости PulseAudio>
	direct on input: 0
	properties:
		media.name = "Детектирование пиков"
		application.name = "Регулятор громкости PulseAudio"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "5.0"
		application.process.id = "879543"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "pavucontrol"
		application.language = "ru_RU.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
1 cache entrie(s) available.
    name: <audio-volume-change>
	index: 0
	sample spec: s16le 2-канальный 4410
	channel map: front-left,front-right
	             Стерео
	length: 11776
	duration: 0.1 s
	volume: n/a
	        balance 0.00
	lazy: no
	filename: <n/a>
	properties:
		media.role = "event"
		event.id = "audio-volume-change"
		event.description = "Звуковая индикация громкости"
		media.name = "audio-volume-change"
		media.filename = "/usr/share/sounds/freedesktop/stereo/audio-volume-change.oga"
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		window.x11.display = ":0"
		window.x11.screen = "0"
		application.process.id = "879543"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "pavucontrol"
		application.language = "ru_RU.utf8"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		application.icon_name = "multimedia-volume-control"

Any thoughts?

Last edited by art (2022-02-03 07:28:09)

Offline

#6 2022-02-03 09:59:50

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,017

Re: No sound: "Device or resource busy" when HDMI cable

The main thing you need to ensure is that 

sudo fuser -v /dev/snd/*

only and exclusively shows pulseaudio accessing a playback device, otherwise there are going to be conflicts, and the symptoms sound like a conflict. For background info on why this is the case I wrote up a small blurp a while ago if you're interested: https://bbs.archlinux.org/viewtopic.php … 8#p1639728

Offline

#7 2022-02-03 13:23:01

art
Member
Registered: 2019-08-12
Posts: 63

Re: No sound: "Device or resource busy" when HDMI cable

V1del wrote:

The main thing you need to ensure is that 

sudo fuser -v /dev/snd/*

only and exclusively shows pulseaudio accessing a playback device, otherwise there are going to be conflicts, and the symptoms sound like a conflict. For background info on why this is the case I wrote up a small blurp a while ago if you're interested: https://bbs.archlinux.org/viewtopic.php … 8#p1639728

V1del, I've got this. Seems OK. Only pulseaudio accessing. Still sound freezes.

❯ sudo LANG=en fuser -v /dev/snd/*
                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  *       1069634 F.... pulseaudio
/dev/snd/controlC1:  *       1069634 F.... pulseaudio
/dev/snd/pcmC1D0p:   *       1069634 F...m pulseaudio

I then tried to stop pulseaudio. `fuse -v /dev/snd/*` shows no one uses those.

Last edited by art (2022-02-03 13:24:06)

Offline

#8 2022-02-03 13:59:01

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,017

Re: No sound: "Device or resource busy" when HDMI cable

Then that's ok from that aspect and I don't directly see anything else wrong. FWIW does the situation improve if you unload/disable the aloops? During the problematic situation to not have too much fluff, what do you get from 

LC_ALL=C pacmd list-sinks
LC_ALL=C pacmd list-sink-inputs

Offline

#9 2022-02-19 13:01:23

art
Member
Registered: 2019-08-12
Posts: 63

Re: No sound: "Device or resource busy" when HDMI cable

@V1del, thanks. It looks like working. No such issue last days. No sure if I have it fixed though. Will try the above next time the issue appears.

Offline

#10 2022-02-21 07:48:25

art
Member
Registered: 2019-08-12
Posts: 63

Re: No sound: "Device or resource busy" when HDMI cable

@V1del Here it goes again. Sound freezes. I woke my laptop from suspended and again the cmus or firefox freezes while trying to play some sound. Here are the outputs below. Why they freeze?

 
2 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9039
	volume: front-left: 65653 / 100% / 0.05 dB,   front-right: 65653 / 100% / 0.05 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 7 KiB
	max rewind: 7 KiB
	monitor source: 0
	sample spec: s16le 2-канальный 4800
	channel map: front-left,front-right
	             Стерео
	used by: 1
	linked by: 3
	configured latency: 40.00 ms; range is 0.50 .. 1837.50 ms
	card: 0 <alsa_card.pci-0000_00_1f.3>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC3204 Analog"
		alsa.id = "ALC3204 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xcc338000 irq 168"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.form_factor = "internal"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Аналоговый стерео"
		device.description = "Встроенное аудио Аналоговый стерео"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>
    index: 1
	name: <alsa_output.platform-snd_aloop.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9009
	volume: front-left: 30419 /  46% / -20.00 dB,   front-right: 30419 /  46% / -20.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: yes
	current latency: 36.05 ms
	max request: 6 KiB
	max rewind: 6 KiB
	monitor source: 2
	sample spec: s16le 2-канальный 4410
	channel map: front-left,front-right
	             Стерео
	used by: 0
	linked by: 3
	configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
	card: 1 <alsa_card.platform-snd_aloop.0>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "Loopback PCM"
		alsa.id = "Loopback PCM"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "Loopback"
		alsa.long_card_name = "Loopback 1"
		alsa.driver_name = "snd_aloop"
		device.bus_path = "platform-snd_aloop.0"
		sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "352800"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Аналоговый стерео"
		device.description = "Встроенное аудио Аналоговый стерео"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card"
	ports:
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-output>
2 sink input(s) available.
    index: 5
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: CORKED
	sink: 1 <alsa_output.platform-snd_aloop.0.analog-stereo>
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 146.90 ms
	requested latency: 75.00 ms
	sample spec: float32le 2-канальный 
	channel map: front-left,front-right
	             Стерео
	resample method: speex-float-1
	module: 12
	client: 12 <Firefox>
	properties:
		media.name = "Lesson 1 - Deep Learning for Coders (2020) - YouTube"
		application.name = "Firefox"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.process.id = "382909"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "firefox"
		application.language = "ru_RU.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"
    index: 7
	driver: <protocol-native.c>
	flags: 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_00_1f.3.analog-stereo>
	volume: front-left: 46425 /  71% / -8.98 dB,   front-right: 46425 /  71% / -8.98 dB
	        balance 0.00
	muted: no
	current latency: 250.00 ms
	requested latency: 210.00 ms
	sample spec: s16le 2-канальный 4800
	channel map: front-left,front-right
	             Стерео
	resample method: (null)
	module: 12
	client: 17 <C* Music Player>
	properties:
		media.role = "music"
		media.icon_name = "audio-x-generic"
		media.name = "playback"
		application.name = "C* Music Player"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.version = "v2.9.1"
		application.process.id = "412275"
		application.process.user = "art"
		application.process.host = "ARCHPC"
		application.process.binary = "cmus"
		application.language = "C"
		window.x11.display = ":0"
		application.process.machine_id = "b783172a0c7a4f3cb5dfffffbea18a90"
		application.process.session_id = "1"
		module-stream-restore.id = "sink-input-by-media-role:music"
❯ sudo fuser -v /dev/snd/*
[sudo] пароль для art: 
                     ПОЛЬЗ-ЛЬ    PID ДОСТУП КОМАНДА
/dev/snd/controlC0:  art       389009 F.... pulseaudio
/dev/snd/controlC1:  art       389009 F.... pulseaudio
/dev/snd/pcmC0D0c:   art       389009 F...m pulseaudio
/dev/snd/pcmC0D0p:   art       389009 F...m pulseaudio
/dev/snd/pcmC1D0c:   art       389009 F...m pulseaudio
/dev/snd/pcmC1D0p:   art       389009 F...m pulseaudio

Offline

#11 2022-02-21 07:54:45

art
Member
Registered: 2019-08-12
Posts: 63

Re: No sound: "Device or resource busy" when HDMI cable

After reboot it works. Here some journalctl msgs:

❯ sudo LANG=en journalctl -e | grep 'pulseaudio\|alsa'
Feb 21 10:50:37 ARCHPC systemd[1]: Manage Sound Card State (restore and store) was skipped because of a failed condition check (ConditionPathExists=/etc/alsa/state-daemon.conf).
Feb 21 10:50:37 ARCHPC alsactl[624]: alsa-lib main.c:1412:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2
Feb 21 10:50:37 ARCHPC audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Feb 21 10:50:40 ARCHPC dbus-daemon[626]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.16' (uid=1000 pid=858 comm="/usr/bin/pulseaudio --daemonize=no --log-target=jo")
Feb 21 10:50:40 ARCHPC pulseaudio[858]: stat('/etc/pulse/default.pa.d'): Нет такого файла или каталога
Feb 21 10:51:27 ARCHPC pulseaudio[858]: Invalid non-ASCII character: 0xffffffd0
Feb 21 10:51:27 ARCHPC pulseaudio[858]: Invalid non-ASCII character: 0xffffffd0
Feb 21 10:51:27 ARCHPC pulseaudio[858]: Invalid non-ASCII character: 0xffffffd0
Feb 21 10:51:27 ARCHPC pulseaudio[858]: Invalid non-ASCII character: 0xffffffd0

Offline

Pages: 1

Board footer

Powered by FluxBB