You are not logged in.
Pages: 1
(Im am kinda experienced, i have installed arch and other distributions multiple times)
I have installed arch linux with the zen kernel, i proceeded through the installation normally but when i rebooted the system nothing showed, just the infamous blinking bar, i don't know whats wrong, i can login from tty2 using lightdm command.
My gpu is a radeon RX-6700XT
Xorg log:
[ 5.547]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[ 5.547] Current Operating System: Linux darkduck-arch-linux 5.16.2-zen1-1-zen #1 ZEN SMP PREEMPT Thu, 20 Jan 2022 16:18:31 +0000 x86_64
[ 5.547] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=ef5c12af-4b71-4c69-8e81-4cc3488db3d1 rw loglevel=3 splash
[ 5.547]
[ 5.547] Current version of pixman: 0.40.0
[ 5.547] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.547] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.547] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 22 21:59:02 2022
[ 5.547] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.547] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.547] (==) No Layout section. Using the first Screen section.
[ 5.547] (==) No screen section available. Using defaults.
[ 5.547] (**) |-->Screen "Default Screen Section" (0)
[ 5.547] (**) | |-->Monitor "<default monitor>"
[ 5.547] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.547] (==) Automatically adding devices
[ 5.547] (==) Automatically enabling devices
[ 5.547] (==) Automatically adding GPU devices
[ 5.547] (==) Automatically binding GPU devices
[ 5.547] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5.547] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 5.547] Entry deleted from font path.
[ 5.547] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 5.547] Entry deleted from font path.
[ 5.547] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 5.547] Entry deleted from font path.
[ 5.547] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 5.547] Entry deleted from font path.
[ 5.547] (==) FontPath set to:
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 5.547] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.547] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.547] (II) Module ABI versions:
[ 5.547] X.Org ANSI C Emulation: 0.4
[ 5.547] X.Org Video Driver: 25.2
[ 5.547] X.Org XInput driver : 24.4
[ 5.547] X.Org Server Extension : 10.0
[ 5.547] (++) using VT number 7
[ 5.547] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 5.549] (--) PCI:*(8@0:0:0) 1002:73df:1eae:6601 rev 193, Mem @ 0x7800000000/17179869184, 0x7c00000000/268435456, 0xfc900000/1048576, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 5.549] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5.549] (II) LoadModule: "glx"
[ 5.549] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.549] (II) Module glx: vendor="X.Org Foundation"
[ 5.549] compiled for 1.21.1.3, module version = 1.0.0
[ 5.549] ABI class: X.Org Server Extension, version 10.0
[ 5.549] (==) Matched ati as autoconfigured driver 0
[ 5.549] (==) Matched modesetting as autoconfigured driver 1
[ 5.549] (==) Matched fbdev as autoconfigured driver 2
[ 5.549] (==) Matched vesa as autoconfigured driver 3
[ 5.549] (==) Assigned the driver to the xf86ConfigLayout
[ 5.549] (II) LoadModule: "ati"
[ 5.549] (WW) Warning, couldn't open module ati
[ 5.549] (EE) Failed to load module "ati" (module does not exist, 0)
[ 5.549] (II) LoadModule: "modesetting"
[ 5.549] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.551] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.551] compiled for 1.21.1.3, module version = 1.21.1
[ 5.551] Module class: X.Org Video Driver
[ 5.551] ABI class: X.Org Video Driver, version 25.2
[ 5.551] (II) LoadModule: "fbdev"
[ 5.551] (WW) Warning, couldn't open module fbdev
[ 5.551] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5.551] (II) LoadModule: "vesa"
[ 5.551] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5.551] (II) Module vesa: vendor="X.Org Foundation"
[ 5.551] compiled for 1.21.1.1, module version = 2.5.0
[ 5.551] Module class: X.Org Video Driver
[ 5.551] ABI class: X.Org Video Driver, version 25.2
[ 5.551] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.551] (II) VESA: driver for VESA chipsets: vesa
[ 5.551] (EE) open /dev/dri/card0: No such file or directory
[ 5.551] (WW) Falling back to old probe method for modesetting
[ 5.551] (EE) open /dev/dri/card0: No such file or directory
[ 5.551] vesa: Refusing to run on UEFI
[ 5.551] (EE) Screen 0 deleted because of no matching config section.
[ 5.551] (II) UnloadModule: "modesetting"
[ 5.551] (EE) Device(s) detected, but none match those in the config file.
[ 5.551] (EE)
Fatal server error:
[ 5.551] (EE) no screens found(EE)
[ 5.551] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 5.551] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 5.551] (EE)
[ 5.551] (EE) Server terminated with error (1). Closing log file.
[darkduck@darkduck-arch-linux log]$ cat Xorg.0.log.old ^C
[darkduck@darkduck-arch-linux log]$ ^C
[darkduck@darkduck-arch-linux log]$ cat Xorg.0.log
[ 630.534]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[ 630.534] Current Operating System: Linux darkduck-arch-linux 5.16.2-zen1-1-zen #1 ZEN SMP PREEMPT Thu, 20 Jan 2022 16:18:31 +0000 x86_64
[ 630.534] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=ef5c12af-4b71-4c69-8e81-4cc3488db3d1 rw loglevel=3 splash
[ 630.534]
[ 630.534] Current version of pixman: 0.40.0
[ 630.534] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 630.534] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 630.534] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 22 22:09:27 2022
[ 630.534] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 630.534] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 630.534] (==) No Layout section. Using the first Screen section.
[ 630.534] (==) No screen section available. Using defaults.
[ 630.534] (**) |-->Screen "Default Screen Section" (0)
[ 630.534] (**) | |-->Monitor "<default monitor>"
[ 630.535] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 630.535] (==) Automatically adding devices
[ 630.535] (==) Automatically enabling devices
[ 630.535] (==) Automatically adding GPU devices
[ 630.535] (==) Automatically binding GPU devices
[ 630.535] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 630.535] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 630.535] Entry deleted from font path.
[ 630.535] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 630.535] Entry deleted from font path.
[ 630.535] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 630.535] Entry deleted from font path.
[ 630.535] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 630.535] Entry deleted from font path.
[ 630.535] (==) FontPath set to:
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 630.535] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 630.535] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 630.535] (II) Module ABI versions:
[ 630.535] X.Org ANSI C Emulation: 0.4
[ 630.535] X.Org Video Driver: 25.2
[ 630.535] X.Org XInput driver : 24.4
[ 630.535] X.Org Server Extension : 10.0
[ 630.535] (++) using VT number 7
[ 630.535] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 630.535] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 630.535] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:06:00.0/0000:07:00.0/0000:08:00.0/drm/card0
[ 630.550] (--) PCI:*(8@0:0:0) 1002:73df:1eae:6601 rev 193, Mem @ 0x7800000000/17179869184, 0x7c00000000/268435456, 0xfc900000/1048576, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 630.550] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 630.550] (II) LoadModule: "glx"
[ 630.550] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 630.551] (II) Module glx: vendor="X.Org Foundation"
[ 630.551] compiled for 1.21.1.3, module version = 1.0.0
[ 630.551] ABI class: X.Org Server Extension, version 10.0
[ 630.551] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 630.551] loading driver: amdgpu
[ 630.551] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 630.551] loading driver: amdgpu
[ 630.551] (==) Matched amdgpu as autoconfigured driver 0
[ 630.551] (==) Matched ati as autoconfigured driver 1
[ 630.551] (==) Matched modesetting as autoconfigured driver 2
[ 630.551] (==) Matched fbdev as autoconfigured driver 3
[ 630.551] (==) Matched vesa as autoconfigured driver 4
[ 630.551] (==) Assigned the driver to the xf86ConfigLayout
[ 630.551] (II) LoadModule: "amdgpu"
[ 630.551] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 630.553] (II) Module amdgpu: vendor="X.Org Foundation"
[ 630.553] compiled for 1.21.1, module version = 21.0.0
[ 630.553] Module class: X.Org Video Driver
[ 630.553] ABI class: X.Org Video Driver, version 25.2
[ 630.553] (II) LoadModule: "ati"
[ 630.553] (WW) Warning, couldn't open module ati
[ 630.553] (EE) Failed to load module "ati" (module does not exist, 0)
[ 630.553] (II) LoadModule: "modesetting"
[ 630.553] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 630.553] (II) Module modesetting: vendor="X.Org Foundation"
[ 630.553] compiled for 1.21.1.3, module version = 1.21.1
[ 630.553] Module class: X.Org Video Driver
[ 630.553] ABI class: X.Org Video Driver, version 25.2
[ 630.553] (II) LoadModule: "fbdev"
[ 630.553] (WW) Warning, couldn't open module fbdev
[ 630.553] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 630.553] (II) LoadModule: "vesa"
[ 630.553] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 630.553] (II) Module vesa: vendor="X.Org Foundation"
[ 630.553] compiled for 1.21.1.1, module version = 2.5.0
[ 630.553] Module class: X.Org Video Driver
[ 630.553] ABI class: X.Org Video Driver, version 25.2
[ 630.553] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 630.553] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 630.553] (II) VESA: driver for VESA chipsets: vesa
[ 630.570] (WW) Falling back to old probe method for modesetting
[ 630.570] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 630.570] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 630.570] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 630.570] (==) AMDGPU(0): Default visual is TrueColor
[ 630.570] (==) AMDGPU(0): RGB weight 888
[ 630.570] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 630.570] (--) AMDGPU(0): Chipset: "AMD Radeon RX 6700 XT" (ChipID = 0x73df)
[ 630.570] (II) Loading sub module "fb"
[ 630.570] (II) LoadModule: "fb"
[ 630.570] (II) Module "fb" already built-in
[ 630.570] (II) Loading sub module "dri2"
[ 630.570] (II) LoadModule: "dri2"
[ 630.570] (II) Module "dri2" already built-in
[ 630.667] (II) Loading sub module "glamoregl"
[ 630.667] (II) LoadModule: "glamoregl"
[ 630.667] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 630.670] (II) Module glamoregl: vendor="X.Org Foundation"
[ 630.670] compiled for 1.21.1.3, module version = 1.0.1
[ 630.670] ABI class: X.Org ANSI C Emulation, version 0.4
[ 630.679] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon RX 6700 XT (NAVY_FLOUNDER, DRM 3.44.0, 5.16.2-zen1-1-zen, LLVM 13.0.0)
[ 630.679] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 630.679] (==) AMDGPU(0): TearFree property default: auto
[ 630.679] (==) AMDGPU(0): VariableRefresh: disabled
[ 630.679] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 630.681] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 630.681] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[ 630.681] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[ 630.681] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 630.701] (WW) EDID timing clock 644.04 exceeds claimed max 605MHz, fixing
[ 630.701] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 630.701] (II) AMDGPU(0): Manufacturer: GBT Model: 270d Serial#: 16843009
[ 630.701] (II) AMDGPU(0): Year: 2021 Week: 53
[ 630.701] (II) AMDGPU(0): EDID Version: 1.4
[ 630.701] (II) AMDGPU(0): Digital Display Input
[ 630.701] (II) AMDGPU(0): 10 bits per channel
[ 630.701] (II) AMDGPU(0): Digital interface is DisplayPort
[ 630.701] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 70 vert.: 39
[ 630.701] (II) AMDGPU(0): Gamma: 2.20
[ 630.701] (II) AMDGPU(0): DPMS capabilities: StandBy Suspend Off
[ 630.701] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 630.701] (II) AMDGPU(0): First detailed timing is preferred mode
[ 630.701] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 630.701] (II) AMDGPU(0): Display is continuous-frequency
[ 630.701] (II) AMDGPU(0): redX: 0.655 redY: 0.324 greenX: 0.209 greenY: 0.714
[ 630.701] (II) AMDGPU(0): blueX: 0.146 blueY: 0.051 whiteX: 0.313 whiteY: 0.329
[ 630.701] (II) AMDGPU(0): Supported established timings:
[ 630.701] (II) AMDGPU(0): 640x480@60Hz
[ 630.701] (II) AMDGPU(0): 640x480@72Hz
[ 630.701] (II) AMDGPU(0): 640x480@75Hz
[ 630.701] (II) AMDGPU(0): 800x600@56Hz
[ 630.701] (II) AMDGPU(0): 800x600@60Hz
[ 630.701] (II) AMDGPU(0): 800x600@72Hz
[ 630.701] (II) AMDGPU(0): 800x600@75Hz
[ 630.701] (II) AMDGPU(0): 1024x768@60Hz
[ 630.701] (II) AMDGPU(0): 1024x768@70Hz
[ 630.701] (II) AMDGPU(0): 1024x768@75Hz
[ 630.701] (II) AMDGPU(0): 1280x1024@75Hz
[ 630.701] (II) AMDGPU(0): Manufacturer's mask: 0
[ 630.701] (II) AMDGPU(0): Supported standard timings:
[ 630.701] (II) AMDGPU(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 630.701] (II) AMDGPU(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 630.701] (II) AMDGPU(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 630.701] (II) AMDGPU(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 630.701] (II) AMDGPU(0): Supported detailed timing:
[ 630.701] (II) AMDGPU(0): clock: 248.1 MHz Image Size: 596 x 335 mm
[ 630.701] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 630.701] (II) AMDGPU(0): v_active: 1440 v_sync: 1494 v_sync_end 1502 v_blanking: 1522 v_border: 0
[ 630.701] (II) AMDGPU(0): Ranges: V min: 48 V max: 165 Hz, H min: 243 H max: 243 kHz, PixClock max 645 MHz
[ 630.701] (II) AMDGPU(0): Monitor name: M27Q
[ 630.701] (II) AMDGPU(0): Serial No: 20530B003219
[ 630.701] (II) AMDGPU(0): Supported detailed timing:
[ 630.701] (II) AMDGPU(0): clock: 644.0 MHz Image Size: 596 x 335 mm
[ 630.701] (II) AMDGPU(0): h_active: 2560 h_sync: 2568 h_sync_end 2600 h_blank_end 2640 h_border: 0
[ 630.701] (II) AMDGPU(0): v_active: 1440 v_sync: 1466 v_sync_end 1474 v_blanking: 1480 v_border: 0
[ 630.701] (II) AMDGPU(0): Supported detailed timing:
[ 630.701] (II) AMDGPU(0): clock: 497.3 MHz Image Size: 596 x 335 mm
[ 630.701] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 630.701] (II) AMDGPU(0): v_active: 1440 v_sync: 1503 v_sync_end 1511 v_blanking: 1525 v_border: 0
[ 630.701] (II) AMDGPU(0): Supported detailed timing:
[ 630.701] (II) AMDGPU(0): clock: 352.9 MHz Image Size: 596 x 335 mm
[ 630.701] (II) AMDGPU(0): h_active: 1920 h_sync: 1988 h_sync_end 2020 h_blank_end 2120 h_border: 0
[ 630.701] (II) AMDGPU(0): v_active: 1080 v_sync: 1143 v_sync_end 1151 v_blanking: 1157 v_border: 0
[ 630.701] (II) AMDGPU(0): Number of EDID sections to follow: 2
[ 630.701] (II) AMDGPU(0): EDID (in hex):
[ 630.701] (II) AMDGPU(0): 00ffffffffffff001c540d2701010101
[ 630.701] (II) AMDGPU(0): 351f0104b5462778fbcb85a75335b625
[ 630.701] (II) AMDGPU(0): 0d50542fcf00d1c00101010101018180
[ 630.701] (II) AMDGPU(0): 9500b3000101ee6000a0a0a052503020
[ 630.701] (II) AMDGPU(0): 680c544f2100001e000000fd0030a5f3
[ 630.701] (II) AMDGPU(0): f33c010a202020202020000000fc004d
[ 630.701] (II) AMDGPU(0): 3237510a2020202020202020000000ff
[ 630.701] (II) AMDGPU(0): 003230353330423030333231390a02cd
[ 630.701] (II) AMDGPU(0): 02033f714902031112042f903f052309
[ 630.701] (II) AMDGPU(0): 17078301000067030c001000383c67d8
[ 630.701] (II) AMDGPU(0): 5dc4017880036d1a0000020130aa0000
[ 630.701] (II) AMDGPU(0): 00000000e305e301e606050164641e94
[ 630.701] (II) AMDGPU(0): fb0050a0a028500820a804544f210000
[ 630.701] (II) AMDGPU(0): 1e3ec200a0a0a055503020f80c544f21
[ 630.701] (II) AMDGPU(0): 00001ed58980c870384d404420f80c54
[ 630.701] (II) AMDGPU(0): 4f2100001e000000000000000000007a
[ 630.701] (II) AMDGPU(0): 70122e00000301140e0b0100ff099f00
[ 630.701] (II) AMDGPU(0): 2f801f009f052700190007000301145f
[ 630.701] (II) AMDGPU(0): e80000ff0977001b001f009f05660000
[ 630.701] (II) AMDGPU(0): 0000000c000000000000000000000000
[ 630.701] (II) AMDGPU(0): 00000000000000000000000000000000
[ 630.701] (II) AMDGPU(0): 00000000000000000000000000000000
[ 630.701] (II) AMDGPU(0): 00000000000000000000000000000000
[ 630.701] (II) AMDGPU(0): 00000000000000000000000000000090
[ 630.701] (--) AMDGPU(0): HDMI max TMDS frequency 300000KHz
[ 630.701] (II) AMDGPU(0): Not using mode "2560x1440" (bad mode clock/interlace/doublescan)
[ 630.701] (II) AMDGPU(0): Printing probed modes for output DisplayPort-0
[ 630.701] (II) AMDGPU(0): Modeline "2560x1440"x59.9 248.14 2560 2608 2640 2720 1440 1494 1502 1522 +hsync +vsync (91.2 kHz eP)
[ 630.701] (II) AMDGPU(0): Modeline "2560x1440"x164.8 644.04 2560 2568 2600 2640 1440 1466 1474 1480 +hsync +vsync (244.0 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "2560x1440"x143.9 594.88 2560 2588 2620 2680 1440 1441 1442 1543 -hsync -vsync (222.0 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "2560x1440"x119.9 497.26 2560 2608 2640 2720 1440 1503 1511 1525 +hsync +vsync (182.8 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1920x1200"x59.9 248.14 1920 2608 2640 2720 1200 1494 1502 1522 +hsync +vsync (91.2 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1920x1080"x143.9 352.85 1920 1988 2020 2120 1080 1143 1151 1157 +hsync +vsync (166.4 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1920x1080"x120.0 297.00 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (135.0 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1920x1080"x119.9 296.70 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (134.9 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1600x1200"x59.9 248.14 1600 2608 2640 2720 1200 1494 1502 1522 +hsync +vsync (91.2 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1280x800"x59.9 248.14 1280 2608 2640 2720 800 1494 1502 1522 +hsync +vsync (91.2 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1280x720"x120.0 148.50 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (90.0 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1280x720"x119.9 148.35 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (89.9 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 630.701] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 630.701] (II) AMDGPU(0): EDID for output DisplayPort-1
[ 630.701] (II) AMDGPU(0): EDID for output DisplayPort-2
[ 630.701] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 630.701] (II) AMDGPU(0): Output DisplayPort-0 connected
[ 630.701] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[ 630.701] (II) AMDGPU(0): Output DisplayPort-2 disconnected
[ 630.701] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 630.701] (II) AMDGPU(0): Using exact sizes for initial modes
[ 630.701] (II) AMDGPU(0): Output DisplayPort-0 using initial mode 2560x1440 +0+0
[ 630.701] (II) AMDGPU(0): mem size init: gart size :2e9782000 vram size: s:2fca15000 visible:2fca15000
[ 630.701] (==) AMDGPU(0): DPI set to (96, 96)
[ 630.701] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 630.701] (II) Loading sub module "ramdac"
[ 630.701] (II) LoadModule: "ramdac"
[ 630.701] (II) Module "ramdac" already built-in
[ 630.701] (II) UnloadModule: "modesetting"
[ 630.701] (II) Unloading modesetting
[ 630.702] (II) UnloadModule: "vesa"
[ 630.702] (II) Unloading vesa
[ 630.702] (II) AMDGPU(0): [DRI2] Setup complete
[ 630.702] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 630.702] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 630.777] (II) AMDGPU(0): Front buffer pitch: 10240 bytes
[ 630.795] (II) AMDGPU(0): SYNC extension fences enabled
[ 630.795] (II) AMDGPU(0): Present extension enabled
[ 630.795] (==) AMDGPU(0): DRI3 enabled
[ 630.795] (==) AMDGPU(0): Backing store enabled
[ 630.795] (II) AMDGPU(0): Direct rendering enabled
[ 630.857] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 630.858] (II) AMDGPU(0): Acceleration enabled
[ 630.858] (==) AMDGPU(0): DPMS enabled
[ 630.858] (==) AMDGPU(0): Silken mouse enabled
[ 630.858] (II) AMDGPU(0): Set up textured video (glamor)
[ 630.866] (II) Initializing extension Generic Event Extension
[ 630.866] (II) Initializing extension SHAPE
[ 630.866] (II) Initializing extension MIT-SHM
[ 630.866] (II) Initializing extension XInputExtension
[ 630.866] (II) Initializing extension XTEST
[ 630.866] (II) Initializing extension BIG-REQUESTS
[ 630.866] (II) Initializing extension SYNC
[ 630.866] (II) Initializing extension XKEYBOARD
[ 630.866] (II) Initializing extension XC-MISC
[ 630.866] (II) Initializing extension SECURITY
[ 630.866] (II) Initializing extension XFIXES
[ 630.867] (II) Initializing extension RENDER
[ 630.867] (II) Initializing extension RANDR
[ 630.867] (II) Initializing extension COMPOSITE
[ 630.867] (II) Initializing extension DAMAGE
[ 630.867] (II) Initializing extension MIT-SCREEN-SAVER
[ 630.867] (II) Initializing extension DOUBLE-BUFFER
[ 630.867] (II) Initializing extension RECORD
[ 630.867] (II) Initializing extension DPMS
[ 630.867] (II) Initializing extension Present
[ 630.867] (II) Initializing extension DRI3
[ 630.867] (II) Initializing extension X-Resource
[ 630.867] (II) Initializing extension XVideo
[ 630.867] (II) Initializing extension XVideo-MotionCompensation
[ 630.867] (II) Initializing extension GLX
[ 630.873] (II) AIGLX: Loaded and initialized radeonsi
[ 630.873] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 630.873] (II) Initializing extension XFree86-VidModeExtension
[ 630.873] (II) Initializing extension XFree86-DGA
[ 630.873] (II) Initializing extension XFree86-DRI
[ 630.873] (II) Initializing extension DRI2
[ 630.873] (II) AMDGPU(0): Setting screen physical size to 677 x 381
[ 630.970] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 630.970] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 630.970] (II) LoadModule: "libinput"
[ 630.970] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 630.972] (II) Module libinput: vendor="X.Org Foundation"
[ 630.972] compiled for 1.21.1, module version = 1.2.0
[ 630.972] Module class: X.Org XInput Driver
[ 630.972] ABI class: X.Org XInput driver, version 24.4
[ 630.972] (II) Using input driver 'libinput' for 'Power Button'
[ 630.972] (**) Power Button: always reports core events
[ 630.972] (**) Option "Device" "/dev/input/event1"
[ 630.972] (**) Option "_source" "server/udev"
[ 630.975] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 630.975] (II) event1 - Power Button: device is a keyboard
[ 630.975] (II) event1 - Power Button: device removed
[ 630.975] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 630.975] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 630.976] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 630.976] (II) event1 - Power Button: device is a keyboard
[ 630.976] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 630.976] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 630.976] (II) Using input driver 'libinput' for 'Power Button'
[ 630.976] (**) Power Button: always reports core events
[ 630.976] (**) Option "Device" "/dev/input/event0"
[ 630.976] (**) Option "_source" "server/udev"
[ 630.976] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 630.976] (II) event0 - Power Button: device is a keyboard
[ 630.976] (II) event0 - Power Button: device removed
[ 630.976] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 630.976] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 630.976] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 630.976] (II) event0 - Power Button: device is a keyboard
[ 630.977] (II) config/udev: Adding input device SteelSeries SteelSeries Arctis 1 Wireless Consumer Control (/dev/input/event16)
[ 630.977] (**) SteelSeries SteelSeries Arctis 1 Wireless Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 630.977] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries Arctis 1 Wireless Consumer Control'
[ 630.977] (**) SteelSeries SteelSeries Arctis 1 Wireless Consumer Control: always reports core events
[ 630.977] (**) Option "Device" "/dev/input/event16"
[ 630.977] (**) Option "_source" "server/udev"
[ 630.977] (II) event16 - SteelSeries SteelSeries Arctis 1 Wireless Consumer Control: is tagged by udev as: Keyboard
[ 630.977] (II) event16 - SteelSeries SteelSeries Arctis 1 Wireless Consumer Control: device is a keyboard
[ 630.977] (II) event16 - SteelSeries SteelSeries Arctis 1 Wireless Consumer Control: device removed
[ 630.994] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-4/1-4:1.3/0003:1038:12B3.0001/input/input16/event16"
[ 630.994] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries Arctis 1 Wireless Consumer Control" (type: KEYBOARD, id 8)
[ 630.995] (II) event16 - SteelSeries SteelSeries Arctis 1 Wireless Consumer Control: is tagged by udev as: Keyboard
[ 630.995] (II) event16 - SteelSeries SteelSeries Arctis 1 Wireless Consumer Control: device is a keyboard
[ 630.995] (II) config/udev: Adding input device SteelSeries SteelSeries Arctis 1 Wireless (/dev/input/event17)
[ 630.995] (II) No input driver specified, ignoring this device.
[ 630.995] (II) This device may have been added with another device file.
[ 630.996] (II) config/udev: Adding input device ASRock LED Controller (/dev/input/event18)
[ 630.996] (**) ASRock LED Controller: Applying InputClass "libinput keyboard catchall"
[ 630.996] (II) Using input driver 'libinput' for 'ASRock LED Controller'
[ 630.996] (**) ASRock LED Controller: always reports core events
[ 630.996] (**) Option "Device" "/dev/input/event18"
[ 630.996] (**) Option "_source" "server/udev"
[ 630.997] (II) event18 - ASRock LED Controller: is tagged by udev as: Keyboard Joystick
[ 630.997] (II) event18 - ASRock LED Controller: device is a keyboard
[ 630.997] (II) event18 - ASRock LED Controller: device removed
[ 630.997] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-8/1-8:1.0/0003:26CE:01A2.0002/input/input19/event18"
[ 630.997] (II) XINPUT: Adding extended input device "ASRock LED Controller" (type: KEYBOARD, id 9)
[ 630.999] (II) event18 - ASRock LED Controller: is tagged by udev as: Keyboard Joystick
[ 630.999] (II) event18 - ASRock LED Controller: device is a keyboard
[ 630.999] (II) config/udev: Adding input device ASRock LED Controller (/dev/input/js0)
[ 630.999] (II) No input driver specified, ignoring this device.
[ 630.999] (II) This device may have been added with another device file.
[ 631.000] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event3)
[ 631.000] (II) No input driver specified, ignoring this device.
[ 631.000] (II) This device may have been added with another device file.
[ 631.000] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event4)
[ 631.000] (II) No input driver specified, ignoring this device.
[ 631.000] (II) This device may have been added with another device file.
[ 631.000] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event5)
[ 631.000] (II) No input driver specified, ignoring this device.
[ 631.000] (II) This device may have been added with another device file.
[ 631.000] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event6)
[ 631.000] (II) No input driver specified, ignoring this device.
[ 631.000] (II) This device may have been added with another device file.
[ 631.001] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event7)
[ 631.001] (II) No input driver specified, ignoring this device.
[ 631.001] (II) This device may have been added with another device file.
[ 631.001] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event8)
[ 631.001] (II) No input driver specified, ignoring this device.
[ 631.001] (II) This device may have been added with another device file.
[ 631.001] (II) config/udev: Adding input device SK61L SK61L (/dev/input/event19)
[ 631.001] (**) SK61L SK61L: Applying InputClass "libinput keyboard catchall"
[ 631.001] (II) Using input driver 'libinput' for 'SK61L SK61L'
[ 631.001] (**) SK61L SK61L: always reports core events
[ 631.001] (**) Option "Device" "/dev/input/event19"
[ 631.001] (**) Option "_source" "server/udev"
[ 631.002] (II) event19 - SK61L SK61L: is tagged by udev as: Keyboard
[ 631.002] (II) event19 - SK61L SK61L: device is a keyboard
[ 631.002] (II) event19 - SK61L SK61L: device removed
[ 631.002] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.0/0003:1EA7:9018.0006/input/input20/event19"
[ 631.002] (II) XINPUT: Adding extended input device "SK61L SK61L" (type: KEYBOARD, id 10)
[ 631.003] (II) event19 - SK61L SK61L: is tagged by udev as: Keyboard
[ 631.004] (II) event19 - SK61L SK61L: device is a keyboard
[ 631.004] (II) config/udev: Adding input device SK61L SK61L Mouse (/dev/input/event20)
[ 631.004] (**) SK61L SK61L Mouse: Applying InputClass "libinput pointer catchall"
[ 631.004] (II) Using input driver 'libinput' for 'SK61L SK61L Mouse'
[ 631.004] (**) SK61L SK61L Mouse: always reports core events
[ 631.004] (**) Option "Device" "/dev/input/event20"
[ 631.004] (**) Option "_source" "server/udev"
[ 631.005] (II) event20 - SK61L SK61L Mouse: is tagged by udev as: Mouse
[ 631.005] (II) event20 - SK61L SK61L Mouse: device is a pointer
[ 631.005] (II) event20 - SK61L SK61L Mouse: device removed
[ 631.018] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.1/0003:1EA7:9018.0007/input/input22/event20"
[ 631.018] (II) XINPUT: Adding extended input device "SK61L SK61L Mouse" (type: MOUSE, id 11)
[ 631.018] (**) Option "AccelerationScheme" "none"
[ 631.018] (**) SK61L SK61L Mouse: (accel) selected scheme none/0
[ 631.018] (**) SK61L SK61L Mouse: (accel) acceleration factor: 2.000
[ 631.018] (**) SK61L SK61L Mouse: (accel) acceleration threshold: 4
[ 631.019] (II) event20 - SK61L SK61L Mouse: is tagged by udev as: Mouse
[ 631.019] (II) event20 - SK61L SK61L Mouse: device is a pointer
[ 631.019] (II) config/udev: Adding input device SK61L SK61L Mouse (/dev/input/mouse0)
[ 631.019] (II) No input driver specified, ignoring this device.
[ 631.019] (II) This device may have been added with another device file.
[ 631.020] (II) config/udev: Adding input device SK61L SK61L Consumer Control (/dev/input/event21)
[ 631.020] (**) SK61L SK61L Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 631.020] (II) Using input driver 'libinput' for 'SK61L SK61L Consumer Control'
[ 631.020] (**) SK61L SK61L Consumer Control: always reports core events
[ 631.020] (**) Option "Device" "/dev/input/event21"
[ 631.020] (**) Option "_source" "server/udev"
[ 631.021] (II) event21 - SK61L SK61L Consumer Control: is tagged by udev as: Keyboard
[ 631.021] (II) event21 - SK61L SK61L Consumer Control: device is a keyboard
[ 631.022] (II) event21 - SK61L SK61L Consumer Control: device removed
[ 631.022] (II) libinput: SK61L SK61L Consumer Control: needs a virtual subdevice
[ 631.022] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.1/0003:1EA7:9018.0007/input/input23/event21"
[ 631.022] (II) XINPUT: Adding extended input device "SK61L SK61L Consumer Control" (type: MOUSE, id 12)
[ 631.022] (**) Option "AccelerationScheme" "none"
[ 631.022] (**) SK61L SK61L Consumer Control: (accel) selected scheme none/0
[ 631.022] (**) SK61L SK61L Consumer Control: (accel) acceleration factor: 2.000
[ 631.022] (**) SK61L SK61L Consumer Control: (accel) acceleration threshold: 4
[ 631.023] (II) event21 - SK61L SK61L Consumer Control: is tagged by udev as: Keyboard
[ 631.023] (II) event21 - SK61L SK61L Consumer Control: device is a keyboard
[ 631.023] (II) config/udev: Adding input device SK61L SK61L Keyboard (/dev/input/event22)
[ 631.024] (**) SK61L SK61L Keyboard: Applying InputClass "libinput keyboard catchall"
[ 631.024] (II) Using input driver 'libinput' for 'SK61L SK61L Keyboard'
[ 631.024] (**) SK61L SK61L Keyboard: always reports core events
[ 631.024] (**) Option "Device" "/dev/input/event22"
[ 631.024] (**) Option "_source" "server/udev"
[ 631.024] (II) event22 - SK61L SK61L Keyboard: is tagged by udev as: Keyboard
[ 631.024] (II) event22 - SK61L SK61L Keyboard: device is a keyboard
[ 631.025] (II) event22 - SK61L SK61L Keyboard: device removed
[ 631.025] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.1/0003:1EA7:9018.0007/input/input25/event22"
[ 631.025] (II) XINPUT: Adding extended input device "SK61L SK61L Keyboard" (type: KEYBOARD, id 13)
[ 631.026] (II) event22 - SK61L SK61L Keyboard: is tagged by udev as: Keyboard
[ 631.026] (II) event22 - SK61L SK61L Keyboard: device is a keyboard
[ 631.026] (II) config/udev: Adding input device Kingston HyperX Pulsefire Haste (/dev/input/event23)
[ 631.026] (**) Kingston HyperX Pulsefire Haste: Applying InputClass "libinput pointer catchall"
[ 631.026] (II) Using input driver 'libinput' for 'Kingston HyperX Pulsefire Haste'
[ 631.026] (**) Kingston HyperX Pulsefire Haste: always reports core events
[ 631.026] (**) Option "Device" "/dev/input/event23"
[ 631.026] (**) Option "_source" "server/udev"
[ 631.079] (II) event23 - Kingston HyperX Pulsefire Haste: is tagged by udev as: Mouse
[ 631.079] (II) event23 - Kingston HyperX Pulsefire Haste: device is a pointer
[ 631.079] (II) event23 - Kingston HyperX Pulsefire Haste: device removed
[ 631.094] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.3/3-2.3.3:1.0/0003:0951:1727.0009/input/input26/event23"
[ 631.094] (II) XINPUT: Adding extended input device "Kingston HyperX Pulsefire Haste" (type: MOUSE, id 14)
[ 631.094] (**) Option "AccelerationScheme" "none"
[ 631.094] (**) Kingston HyperX Pulsefire Haste: (accel) selected scheme none/0
[ 631.094] (**) Kingston HyperX Pulsefire Haste: (accel) acceleration factor: 2.000
[ 631.094] (**) Kingston HyperX Pulsefire Haste: (accel) acceleration threshold: 4
[ 631.146] (II) event23 - Kingston HyperX Pulsefire Haste: is tagged by udev as: Mouse
[ 631.146] (II) event23 - Kingston HyperX Pulsefire Haste: device is a pointer
[ 631.147] (II) config/udev: Adding input device Kingston HyperX Pulsefire Haste (/dev/input/mouse1)
[ 631.147] (II) No input driver specified, ignoring this device.
[ 631.147] (II) This device may have been added with another device file.
[ 631.147] (II) config/udev: Adding input device Kingston HyperX Pulsefire Haste System Control (/dev/input/event24)
[ 631.147] (**) Kingston HyperX Pulsefire Haste System Control: Applying InputClass "libinput keyboard catchall"
[ 631.147] (II) Using input driver 'libinput' for 'Kingston HyperX Pulsefire Haste System Control'
[ 631.147] (**) Kingston HyperX Pulsefire Haste System Control: always reports core events
[ 631.147] (**) Option "Device" "/dev/input/event24"
[ 631.147] (**) Option "_source" "server/udev"
[ 631.147] (II) event24 - Kingston HyperX Pulsefire Haste System Control: is tagged by udev as: Keyboard
[ 631.147] (II) event24 - Kingston HyperX Pulsefire Haste System Control: device is a keyboard
[ 631.147] (II) event24 - Kingston HyperX Pulsefire Haste System Control: device removed
[ 631.147] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.3/3-2.3.3:1.1/0003:0951:1727.000A/input/input27/event24"
[ 631.147] (II) XINPUT: Adding extended input device "Kingston HyperX Pulsefire Haste System Control" (type: KEYBOARD, id 15)
[ 631.148] (II) event24 - Kingston HyperX Pulsefire Haste System Control: is tagged by udev as: Keyboard
[ 631.148] (II) event24 - Kingston HyperX Pulsefire Haste System Control: device is a keyboard
[ 631.148] (II) config/udev: Adding input device Kingston HyperX Pulsefire Haste Consumer Control (/dev/input/event25)
[ 631.148] (**) Kingston HyperX Pulsefire Haste Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 631.148] (II) Using input driver 'libinput' for 'Kingston HyperX Pulsefire Haste Consumer Control'
[ 631.148] (**) Kingston HyperX Pulsefire Haste Consumer Control: always reports core events
[ 631.148] (**) Option "Device" "/dev/input/event25"
[ 631.148] (**) Option "_source" "server/udev"
[ 631.149] (II) event25 - Kingston HyperX Pulsefire Haste Consumer Control: is tagged by udev as: Keyboard
[ 631.149] (II) event25 - Kingston HyperX Pulsefire Haste Consumer Control: device is a keyboard
[ 631.149] (II) event25 - Kingston HyperX Pulsefire Haste Consumer Control: device removed
[ 631.149] (II) libinput: Kingston HyperX Pulsefire Haste Consumer Control: needs a virtual subdevice
[ 631.149] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.3/3-2.3.3:1.1/0003:0951:1727.000A/input/input28/event25"
[ 631.149] (II) XINPUT: Adding extended input device "Kingston HyperX Pulsefire Haste Consumer Control" (type: MOUSE, id 16)
[ 631.149] (**) Option "AccelerationScheme" "none"
[ 631.149] (**) Kingston HyperX Pulsefire Haste Consumer Control: (accel) selected scheme none/0
[ 631.149] (**) Kingston HyperX Pulsefire Haste Consumer Control: (accel) acceleration factor: 2.000
[ 631.149] (**) Kingston HyperX Pulsefire Haste Consumer Control: (accel) acceleration threshold: 4
[ 631.150] (II) event25 - Kingston HyperX Pulsefire Haste Consumer Control: is tagged by udev as: Keyboard
[ 631.150] (II) event25 - Kingston HyperX Pulsefire Haste Consumer Control: device is a keyboard
[ 631.150] (II) config/udev: Adding input device Kingston HyperX Pulsefire Haste (/dev/input/event26)
[ 631.150] (II) No input driver specified, ignoring this device.
[ 631.150] (II) This device may have been added with another device file.
[ 631.150] (II) config/udev: Adding input device Kingston HyperX Pulsefire Haste (/dev/input/event27)
[ 631.150] (**) Kingston HyperX Pulsefire Haste: Applying InputClass "libinput keyboard catchall"
[ 631.150] (II) Using input driver 'libinput' for 'Kingston HyperX Pulsefire Haste'
[ 631.150] (**) Kingston HyperX Pulsefire Haste: always reports core events
[ 631.150] (**) Option "Device" "/dev/input/event27"
[ 631.150] (**) Option "_source" "server/udev"
[ 631.151] (II) event27 - Kingston HyperX Pulsefire Haste: is tagged by udev as: Keyboard
[ 631.151] (II) event27 - Kingston HyperX Pulsefire Haste: device is a keyboard
[ 631.151] (II) event27 - Kingston HyperX Pulsefire Haste: device removed
[ 631.151] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.3/3-2.3.3:1.2/0003:0951:1727.000B/input/input30/event27"
[ 631.151] (II) XINPUT: Adding extended input device "Kingston HyperX Pulsefire Haste" (type: KEYBOARD, id 17)
[ 631.152] (II) event27 - Kingston HyperX Pulsefire Haste: is tagged by udev as: Keyboard
[ 631.152] (II) event27 - Kingston HyperX Pulsefire Haste: device is a keyboard
[ 631.152] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event10)
[ 631.152] (II) No input driver specified, ignoring this device.
[ 631.152] (II) This device may have been added with another device file.
[ 631.152] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event11)
[ 631.152] (II) No input driver specified, ignoring this device.
[ 631.152] (II) This device may have been added with another device file.
[ 631.152] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event12)
[ 631.152] (II) No input driver specified, ignoring this device.
[ 631.152] (II) This device may have been added with another device file.
[ 631.152] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event13)
[ 631.152] (II) No input driver specified, ignoring this device.
[ 631.152] (II) This device may have been added with another device file.
[ 631.152] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event14)
[ 631.152] (II) No input driver specified, ignoring this device.
[ 631.152] (II) This device may have been added with another device file.
[ 631.152] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event15)
[ 631.152] (II) No input driver specified, ignoring this device.
[ 631.152] (II) This device may have been added with another device file.
[ 631.153] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event9)
[ 631.153] (II) No input driver specified, ignoring this device.
[ 631.153] (II) This device may have been added with another device file.
[ 631.153] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 631.153] (II) No input driver specified, ignoring this device.
[ 631.153] (II) This device may have been added with another device file.
[ 631.155] (**) SK61L SK61L Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 631.155] (II) Using input driver 'libinput' for 'SK61L SK61L Consumer Control'
[ 631.155] (**) SK61L SK61L Consumer Control: always reports core events
[ 631.155] (**) Option "Device" "/dev/input/event21"
[ 631.155] (**) Option "_source" "_driver/libinput"
[ 631.155] (II) libinput: SK61L SK61L Consumer Control: is a virtual subdevice
[ 631.155] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.1/0003:1EA7:9018.0007/input/input23/event21"
[ 631.155] (II) XINPUT: Adding extended input device "SK61L SK61L Consumer Control" (type: KEYBOARD, id 18)
[ 631.155] (**) Kingston HyperX Pulsefire Haste Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 631.155] (II) Using input driver 'libinput' for 'Kingston HyperX Pulsefire Haste Consumer Control'
[ 631.155] (**) Kingston HyperX Pulsefire Haste Consumer Control: always reports core events
[ 631.155] (**) Option "Device" "/dev/input/event25"
[ 631.155] (**) Option "_source" "_driver/libinput"
[ 631.155] (II) libinput: Kingston HyperX Pulsefire Haste Consumer Control: is a virtual subdevice
[ 631.155] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.3/3-2.3.3:1.1/0003:0951:1727.000A/input/input28/event25"
[ 631.155] (II) XINPUT: Adding extended input device "Kingston HyperX Pulsefire Haste Consumer Control" (type: KEYBOARD, id 19)
[ 876.710] (EE) event19 - SK61L SK61L: client bug: event processing lagging behind by 12ms, your system is too slow
[ 881.157] (WW) EDID timing clock 644.04 exceeds claimed max 605MHz, fixing
[ 881.157] (II) AMDGPU(0): EDID vendor "GBT", prod id 9997
[ 881.157] (II) AMDGPU(0): Using EDID range info for horizontal sync
[ 881.157] (II) AMDGPU(0): Using EDID range info for vertical refresh
[ 881.157] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 881.157] (II) AMDGPU(0): Modeline "2560x1440"x0.0 248.14 2560 2608 2640 2720 1440 1494 1502 1522 +hsync +vsync (91.2 kHz eP)
[ 881.157] (II) AMDGPU(0): Modeline "2560x1440"x0.0 644.04 2560 2568 2600 2640 1440 1466 1474 1480 +hsync +vsync (244.0 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "2560x1440"x0.0 497.26 2560 2608 2640 2720 1440 1503 1511 1525 +hsync +vsync (182.8 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1920x1080"x0.0 352.85 1920 1988 2020 2120 1080 1143 1151 1157 +hsync +vsync (166.4 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1280x720"x0.0 148.50 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (90.0 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1920x1080"x0.0 297.00 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (135.0 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 881.157] (II) AMDGPU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 881.157] (--) AMDGPU(0): HDMI max TMDS frequency 300000KHz
[ 881.159] (WW) EDID timing clock 644.04 exceeds claimed max 605MHz, fixing
[ 881.159] (II) AMDGPU(0): EDID vendor "GBT", prod id 9997
[ 881.159] (II) AMDGPU(0): Using hsync ranges from config file
[ 881.159] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 881.159] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 881.159] (II) AMDGPU(0): Modeline "2560x1440"x0.0 248.14 2560 2608 2640 2720 1440 1494 1502 1522 +hsync +vsync (91.2 kHz eP)
[ 881.159] (II) AMDGPU(0): Modeline "2560x1440"x0.0 644.04 2560 2568 2600 2640 1440 1466 1474 1480 +hsync +vsync (244.0 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "2560x1440"x0.0 497.26 2560 2608 2640 2720 1440 1503 1511 1525 +hsync +vsync (182.8 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1920x1080"x0.0 352.85 1920 1988 2020 2120 1080 1143 1151 1157 +hsync +vsync (166.4 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1280x720"x0.0 148.50 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (90.0 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1920x1080"x0.0 297.00 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (135.0 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 881.159] (II) AMDGPU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 881.159] (--) AMDGPU(0): HDMI max TMDS frequency 300000KHz
[ 1123.769] (EE) event19 - SK61L SK61L: client bug: event processing lagging behind by 28ms, your system is too slow
[ 1394.796] (EE) event19 - SK61L SK61L: client bug: event processing lagging behind by 20ms, your system is too slow
[darkduck@darkduck-arch-linux log]$ ^C
[darkduck@darkduck-arch-linux log]$ cat Xorg.0.log.old
[ 5.547]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[ 5.547] Current Operating System: Linux darkduck-arch-linux 5.16.2-zen1-1-zen #1 ZEN SMP PREEMPT Thu, 20 Jan 2022 16:18:31 +0000 x86_64
[ 5.547] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=ef5c12af-4b71-4c69-8e81-4cc3488db3d1 rw loglevel=3 splash
[ 5.547]
[ 5.547] Current version of pixman: 0.40.0
[ 5.547] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.547] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.547] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 22 21:59:02 2022
[ 5.547] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.547] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.547] (==) No Layout section. Using the first Screen section.
[ 5.547] (==) No screen section available. Using defaults.
[ 5.547] (**) |-->Screen "Default Screen Section" (0)
[ 5.547] (**) | |-->Monitor "<default monitor>"
[ 5.547] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.547] (==) Automatically adding devices
[ 5.547] (==) Automatically enabling devices
[ 5.547] (==) Automatically adding GPU devices
[ 5.547] (==) Automatically binding GPU devices
[ 5.547] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5.547] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 5.547] Entry deleted from font path.
[ 5.547] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 5.547] Entry deleted from font path.
[ 5.547] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 5.547] Entry deleted from font path.
[ 5.547] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 5.547] Entry deleted from font path.
[ 5.547] (==) FontPath set to:
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 5.547] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.547] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.547] (II) Module ABI versions:
[ 5.547] X.Org ANSI C Emulation: 0.4
[ 5.547] X.Org Video Driver: 25.2
[ 5.547] X.Org XInput driver : 24.4
[ 5.547] X.Org Server Extension : 10.0
[ 5.547] (++) using VT number 7
[ 5.547] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 5.549] (--) PCI:*(8@0:0:0) 1002:73df:1eae:6601 rev 193, Mem @ 0x7800000000/17179869184, 0x7c00000000/268435456, 0xfc900000/1048576, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 5.549] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5.549] (II) LoadModule: "glx"
[ 5.549] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.549] (II) Module glx: vendor="X.Org Foundation"
[ 5.549] compiled for 1.21.1.3, module version = 1.0.0
[ 5.549] ABI class: X.Org Server Extension, version 10.0
[ 5.549] (==) Matched ati as autoconfigured driver 0
[ 5.549] (==) Matched modesetting as autoconfigured driver 1
[ 5.549] (==) Matched fbdev as autoconfigured driver 2
[ 5.549] (==) Matched vesa as autoconfigured driver 3
[ 5.549] (==) Assigned the driver to the xf86ConfigLayout
[ 5.549] (II) LoadModule: "ati"
[ 5.549] (WW) Warning, couldn't open module ati
[ 5.549] (EE) Failed to load module "ati" (module does not exist, 0)
[ 5.549] (II) LoadModule: "modesetting"
[ 5.549] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.551] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.551] compiled for 1.21.1.3, module version = 1.21.1
[ 5.551] Module class: X.Org Video Driver
[ 5.551] ABI class: X.Org Video Driver, version 25.2
[ 5.551] (II) LoadModule: "fbdev"
[ 5.551] (WW) Warning, couldn't open module fbdev
[ 5.551] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5.551] (II) LoadModule: "vesa"
[ 5.551] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5.551] (II) Module vesa: vendor="X.Org Foundation"
[ 5.551] compiled for 1.21.1.1, module version = 2.5.0
[ 5.551] Module class: X.Org Video Driver
[ 5.551] ABI class: X.Org Video Driver, version 25.2
[ 5.551] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.551] (II) VESA: driver for VESA chipsets: vesa
[ 5.551] (EE) open /dev/dri/card0: No such file or directory
[ 5.551] (WW) Falling back to old probe method for modesetting
[ 5.551] (EE) open /dev/dri/card0: No such file or directory
[ 5.551] vesa: Refusing to run on UEFI
[ 5.551] (EE) Screen 0 deleted because of no matching config section.
[ 5.551] (II) UnloadModule: "modesetting"
[ 5.551] (EE) Device(s) detected, but none match those in the config file.
[ 5.551] (EE)
Fatal server error:
[ 5.551] (EE) no screens found(EE)
[ 5.551] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 5.551] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 5.551] (EE)
[ 5.551] (EE) Server terminated with error (1). Closing log file.Offline
Please post the output of dmesg. The lack of /dev/dri/card0 is indicative of a kernel issue.
Offline
thakns for responding here it is the file
[ 0.000000] Linux version 5.16.2-zen1-1-zen (linux-zen@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 ZEN SMP PREEMPT Thu, 20 Jan 2022 16:18:31 +0000
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=ef5c12af-4b71-4c69-8e81-4cc3488db3d1 rw loglevel=3 splash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
[ 0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 3376
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20e000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bb72dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb72e000-0x00000000bcd4efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bcd4f000-0x00000000bcd9afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bcd9b000-0x00000000bd47afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bd47b000-0x00000000bdf77fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdf78000-0x00000000bdffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bdfff000-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f37ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000043f380000-0x000000043fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI=0xbd464000 ACPI 2.0=0xbd464014 TPMFinalLog=0xbd42e000 SMBIOS=0xbde32000 SMBIOS 3.0=0xbde31000 MEMATTR=0xb8202298 ESRT=0xba2f3818
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B550M Steel Legend, BIOS P2.20 08/02/2021
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3792.882 MHz processor
[ 0.000212] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000214] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000218] last_pfn = 0x43f380 max_arch_pfn = 0x400000000
[ 0.000652] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000829] total RAM covered: 3071M
[ 0.000902] Found optimal setting for mtrr clean up
[ 0.000902] gran_size: 64K chunk_size: 64M num_reg: 3 lose cover RAM: 0G
[ 0.000970] e820: update [mem 0xbd200000-0xbd20ffff] usable ==> reserved
[ 0.000974] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000976] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[ 0.003400] esrt: Reserving ESRT space from 0x00000000ba2f3818 to 0x00000000ba2f38a0.
[ 0.003406] e820: update [mem 0xba2f3000-0xba2f3fff] usable ==> reserved
[ 0.003431] Using GB pages for direct mapping
[ 0.003824] Secure boot disabled
[ 0.003824] RAMDISK: [mem 0x36ecb000-0x3775cfff]
[ 0.003827] ACPI: Early table checksum verification disabled
[ 0.003829] ACPI: RSDP 0x00000000BD464014 000024 (v02 ALASKA)
[ 0.003831] ACPI: XSDT 0x00000000BD463728 0000EC (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003834] ACPI: FACP 0x00000000BCD8C000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.003838] ACPI: DSDT 0x00000000BCD85000 0067F6 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.003839] ACPI: FACS 0x00000000BD45E000 000040
[ 0.003840] ACPI: SSDT 0x00000000BCD92000 008C98 (v02 AMD AmdTable 00000002 MSFT 04000000)
[ 0.003842] ACPI: SSDT 0x00000000BCD8E000 003AD2 (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.003843] ACPI: SSDT 0x00000000BCD8D000 000221 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.003844] ACPI: FIDT 0x00000000BCD84000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003846] ACPI: MCFG 0x00000000BCD83000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.003847] ACPI: AAFT 0x00000000BCD82000 000115 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.003849] ACPI: HPET 0x00000000BCD81000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.003850] ACPI: VFCT 0x00000000BCD76000 00AA84 (v01 ALASKA A M I 00000001 AMD 31504F47)
[ 0.003851] ACPI: BGRT 0x00000000BCD75000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003852] ACPI: TPM2 0x00000000BCD74000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.003854] ACPI: PCCT 0x00000000BCD73000 00006E (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003855] ACPI: SSDT 0x00000000BCD6F000 003FB9 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003856] ACPI: CRAT 0x00000000BCD6E000 000E98 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003858] ACPI: CDIT 0x00000000BCD6D000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003859] ACPI: SSDT 0x00000000BCD6C000 000293 (v01 AMD ArticDGP 00000001 INTL 20120913)
[ 0.003860] ACPI: SSDT 0x00000000BCD6A000 0010B4 (v01 AMD ArticTPX 00000001 INTL 20120913)
[ 0.003861] ACPI: SSDT 0x00000000BCD69000 00052C (v01 AMD ArticNOI 00000001 INTL 20120913)
[ 0.003863] ACPI: SSDT 0x00000000BCD65000 003802 (v01 AMD ArticN 00000001 INTL 20120913)
[ 0.003864] ACPI: WSMT 0x00000000BCD64000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003865] ACPI: APIC 0x00000000BCD63000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.003867] ACPI: SSDT 0x00000000BCD62000 00007D (v01 AMD ArticDIS 00000001 INTL 20120913)
[ 0.003868] ACPI: SSDT 0x00000000BCD60000 0010AF (v01 AMD ArticC 00000001 INTL 20120913)
[ 0.003869] ACPI: SSDT 0x00000000BCD5F000 0000BF (v01 AMD AmdTable 00001000 INTL 20120913)
[ 0.003871] ACPI: FPDT 0x00000000BCD5E000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003872] ACPI: Reserving FACP table memory at [mem 0xbcd8c000-0xbcd8c113]
[ 0.003873] ACPI: Reserving DSDT table memory at [mem 0xbcd85000-0xbcd8b7f5]
[ 0.003873] ACPI: Reserving FACS table memory at [mem 0xbd45e000-0xbd45e03f]
[ 0.003874] ACPI: Reserving SSDT table memory at [mem 0xbcd92000-0xbcd9ac97]
[ 0.003874] ACPI: Reserving SSDT table memory at [mem 0xbcd8e000-0xbcd91ad1]
[ 0.003874] ACPI: Reserving SSDT table memory at [mem 0xbcd8d000-0xbcd8d220]
[ 0.003875] ACPI: Reserving FIDT table memory at [mem 0xbcd84000-0xbcd8409b]
[ 0.003875] ACPI: Reserving MCFG table memory at [mem 0xbcd83000-0xbcd8303b]
[ 0.003876] ACPI: Reserving AAFT table memory at [mem 0xbcd82000-0xbcd82114]
[ 0.003876] ACPI: Reserving HPET table memory at [mem 0xbcd81000-0xbcd81037]
[ 0.003876] ACPI: Reserving VFCT table memory at [mem 0xbcd76000-0xbcd80a83]
[ 0.003877] ACPI: Reserving BGRT table memory at [mem 0xbcd75000-0xbcd75037]
[ 0.003877] ACPI: Reserving TPM2 table memory at [mem 0xbcd74000-0xbcd7404b]
[ 0.003878] ACPI: Reserving PCCT table memory at [mem 0xbcd73000-0xbcd7306d]
[ 0.003878] ACPI: Reserving SSDT table memory at [mem 0xbcd6f000-0xbcd72fb8]
[ 0.003879] ACPI: Reserving CRAT table memory at [mem 0xbcd6e000-0xbcd6ee97]
[ 0.003879] ACPI: Reserving CDIT table memory at [mem 0xbcd6d000-0xbcd6d028]
[ 0.003880] ACPI: Reserving SSDT table memory at [mem 0xbcd6c000-0xbcd6c292]
[ 0.003880] ACPI: Reserving SSDT table memory at [mem 0xbcd6a000-0xbcd6b0b3]
[ 0.003880] ACPI: Reserving SSDT table memory at [mem 0xbcd69000-0xbcd6952b]
[ 0.003881] ACPI: Reserving SSDT table memory at [mem 0xbcd65000-0xbcd68801]
[ 0.003881] ACPI: Reserving WSMT table memory at [mem 0xbcd64000-0xbcd64027]
[ 0.003882] ACPI: Reserving APIC table memory at [mem 0xbcd63000-0xbcd6315d]
[ 0.003882] ACPI: Reserving SSDT table memory at [mem 0xbcd62000-0xbcd6207c]
[ 0.003883] ACPI: Reserving SSDT table memory at [mem 0xbcd60000-0xbcd610ae]
[ 0.003883] ACPI: Reserving SSDT table memory at [mem 0xbcd5f000-0xbcd5f0be]
[ 0.003884] ACPI: Reserving FPDT table memory at [mem 0xbcd5e000-0xbcd5e043]
[ 0.003918] No NUMA configuration found
[ 0.003918] Faking a node at [mem 0x0000000000000000-0x000000043f37ffff]
[ 0.003920] NODE_DATA(0) allocated [mem 0x43f37b000-0x43f37ffff]
[ 0.003935] Zone ranges:
[ 0.003936] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.003937] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.003937] Normal [mem 0x0000000100000000-0x000000043f37ffff]
[ 0.003938] Device empty
[ 0.003939] Movable zone start for each node
[ 0.003939] Early memory node ranges
[ 0.003939] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.003940] node 0: [mem 0x0000000000100000-0x0000000009bfefff]
[ 0.003940] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.003941] node 0: [mem 0x000000000a20e000-0x000000000affffff]
[ 0.003941] node 0: [mem 0x000000000b020000-0x00000000bb72dfff]
[ 0.003942] node 0: [mem 0x00000000bdfff000-0x00000000beffffff]
[ 0.003942] node 0: [mem 0x0000000100000000-0x000000043f37ffff]
[ 0.003943] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f37ffff]
[ 0.003945] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.003954] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.004025] On node 0, zone DMA32: 1025 pages in unavailable ranges
[ 0.004033] On node 0, zone DMA32: 14 pages in unavailable ranges
[ 0.005820] On node 0, zone DMA32: 32 pages in unavailable ranges
[ 0.005874] On node 0, zone DMA32: 10449 pages in unavailable ranges
[ 0.017787] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.017801] On node 0, zone Normal: 3200 pages in unavailable ranges
[ 0.018290] ACPI: PM-Timer IO Port: 0x808
[ 0.018295] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.018304] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[ 0.018308] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[ 0.018309] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.018310] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.018312] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.018313] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.018320] e820: update [mem 0xb7efa000-0xb7f3afff] usable ==> reserved
[ 0.018328] smpboot: Allowing 32 CPUs, 16 hotplug CPUs
[ 0.018345] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.018346] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.018347] PM: hibernation: Registered nosave memory: [mem 0x09bff000-0x09ffffff]
[ 0.018348] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20dfff]
[ 0.018349] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.018350] PM: hibernation: Registered nosave memory: [mem 0xb7efa000-0xb7f3afff]
[ 0.018351] PM: hibernation: Registered nosave memory: [mem 0xba2f3000-0xba2f3fff]
[ 0.018352] PM: hibernation: Registered nosave memory: [mem 0xbb72e000-0xbcd4efff]
[ 0.018352] PM: hibernation: Registered nosave memory: [mem 0xbcd4f000-0xbcd9afff]
[ 0.018352] PM: hibernation: Registered nosave memory: [mem 0xbcd9b000-0xbd47afff]
[ 0.018353] PM: hibernation: Registered nosave memory: [mem 0xbd47b000-0xbdf77fff]
[ 0.018353] PM: hibernation: Registered nosave memory: [mem 0xbdf78000-0xbdffefff]
[ 0.018354] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[ 0.018354] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[ 0.018355] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.018355] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
[ 0.018355] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[ 0.018356] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff]
[ 0.018356] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd7fffff]
[ 0.018356] PM: hibernation: Registered nosave memory: [mem 0xfd800000-0xfe9fffff]
[ 0.018357] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.018357] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.018357] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.018358] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.018358] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.018358] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.018359] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.018359] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.018359] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.018360] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.018360] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.018360] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.018361] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.018361] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.018361] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.018362] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.018362] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.018362] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[ 0.018363] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.018363] [mem 0xc0000000-0xefffffff] available for PCI devices
[ 0.018364] Booting paravirtualized kernel on bare hardware
[ 0.018366] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.021155] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1
[ 0.021813] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[ 0.021818] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[ 0.021819] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.021824] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.021843] Fallback order for Node 0: 0
[ 0.021847] Built 1 zonelists, mobility grouping on. Total pages: 4109990
[ 0.021848] Policy zone: Normal
[ 0.021849] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=ef5c12af-4b71-4c69-8e81-4cc3488db3d1 rw loglevel=3 splash
[ 0.021884] Unknown kernel command line parameters "splash BOOT_IMAGE=/vmlinuz-linux-zen", will be passed to user space.
[ 0.021885] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.021885] printk: log_buf_len total cpu_extra contributions: 126976 bytes
[ 0.021886] printk: log_buf_len min size: 131072 bytes
[ 0.021988] printk: log_buf_len: 262144 bytes
[ 0.021988] printk: early log buf free: 115368(88%)
[ 0.022576] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.022872] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.023011] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[ 0.045287] Memory: 16201280K/16701564K available (16392K kernel code, 2104K rwdata, 10856K rodata, 1820K init, 3668K bss, 500024K reserved, 0K cma-reserved)
[ 0.045290] random: get_random_u64 called from __kmem_cache_create+0x2c/0x6f0 with crng_init=0
[ 0.045362] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.045368] ftrace: allocating 42913 entries in 168 pages
[ 0.053930] ftrace: allocated 168 pages with 3 groups
[ 0.053986] Dynamic Preempt: full
[ 0.054020] rcu: Preemptible hierarchical RCU implementation.
[ 0.054020] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.054021] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
[ 0.054021] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.054022] Trampoline variant of Tasks RCU enabled.
[ 0.054022] Rude variant of Tasks RCU enabled.
[ 0.054022] Tracing variant of Tasks RCU enabled.
[ 0.054023] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.054023] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.055917] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
[ 0.056132] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.056212] Console: colour dummy device 80x25
[ 0.056219] printk: console [tty0] enabled
[ 0.056233] ACPI: Core revision 20210930
[ 0.056365] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.056377] APIC: Switch to symmetric I/O mode setup
[ 0.056380] Switched APIC routing to physical flat.
[ 0.056929] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061378] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d582a2ac4d, max_idle_ns: 881591057907 ns
[ 0.061381] Calibrating delay loop (skipped), value calculated using timer frequency.. 7585.76 BogoMIPS (lpj=3792882)
[ 0.061382] pid_max: default: 32768 minimum: 301
[ 0.062860] LSM: Security Framework initializing
[ 0.062866] landlock: Up and running.
[ 0.062867] Yama: becoming mindful.
[ 0.062870] LSM support for eBPF active
[ 0.062892] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.062908] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.063053] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.063096] LVT offset 1 assigned for vector 0xf9
[ 0.063237] LVT offset 2 assigned for vector 0xf4
[ 0.063277] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[ 0.063277] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.063279] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.063281] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.063281] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.063281] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.063282] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.063282] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.063283] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.066754] Freeing SMP alternatives memory: 44K
[ 0.168918] smpboot: CPU0: AMD Ryzen 7 5800X 8-Core Processor (family: 0x19, model: 0x21, stepping: 0x0)
[ 0.168991] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.168994] ... version: 0
[ 0.168994] ... bit width: 48
[ 0.168994] ... generic registers: 6
[ 0.168995] ... value mask: 0000ffffffffffff
[ 0.168995] ... max period: 00007fffffffffff
[ 0.168996] ... fixed-purpose events: 0
[ 0.168996] ... event mask: 000000000000003f
[ 0.169031] rcu: Hierarchical SRCU implementation.
[ 0.169249] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.169369] smp: Bringing up secondary CPUs ...
[ 0.169379] x86: Booting SMP configuration:
[ 0.169379] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8
[ 0.178422] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.178452] #9 #10 #11 #12 #13 #14 #15
[ 0.187396] smp: Brought up 1 node, 16 CPUs
[ 0.187396] smpboot: Max logical packages: 2
[ 0.187396] smpboot: Total of 16 processors activated (121372.22 BogoMIPS)
[ 0.188530] devtmpfs: initialized
[ 0.188530] x86/mm: Memory block size: 128MB
[ 0.188788] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20dfff] (57344 bytes)
[ 0.188788] ACPI: PM: Registering ACPI NVS region [mem 0xbcd9b000-0xbd47afff] (7208960 bytes)
[ 0.188788] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.188788] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.188788] pinctrl core: initialized pinctrl subsystem
[ 0.188788] PM: RTC time: 20:58:57, date: 2022-01-22
[ 0.188788] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.188788] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.189426] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.189485] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.189490] audit: initializing netlink subsys (disabled)
[ 0.189495] audit: type=2000 audit(1642885137.133:1): state=initialized audit_enabled=0 res=1
[ 0.189495] thermal_sys: Registered thermal governor 'fair_share'
[ 0.189495] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.189495] thermal_sys: Registered thermal governor 'step_wise'
[ 0.189495] thermal_sys: Registered thermal governor 'user_space'
[ 0.189495] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.189495] cpuidle: using governor ladder
[ 0.189495] cpuidle: using governor menu
[ 0.189495] Detected 1 PCC Subspaces
[ 0.189495] Registering PCC driver as Mailbox controller
[ 0.189495] HugeTLB: can free 4094 vmemmap pages for hugepages-1048576kB
[ 0.189495] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.189495] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.189495] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.189495] PCI: Using configuration type 1 for base access
[ 0.190504] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.190508] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[ 0.190508] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.190508] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.190508] ACPI: Added _OSI(Module Device)
[ 0.190508] ACPI: Added _OSI(Processor Device)
[ 0.190508] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.190508] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.190508] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.190508] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.190508] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.199184] ACPI: 12 ACPI AML tables successfully acquired and loaded
[ 0.200071] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.202725] ACPI: Interpreter enabled
[ 0.202734] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.202734] ACPI: Using IOAPIC for interrupt routing
[ 0.202924] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.203198] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.208645] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.208649] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.208703] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[ 0.208798] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.208805] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.209011] PCI host bridge to bus 0000:00
[ 0.209012] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.209013] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.209014] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.209014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.209015] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.209016] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfcffffff window]
[ 0.209016] pci_bus 0000:00: root bus resource [mem 0x440000000-0x7fffffffff window]
[ 0.209017] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.209025] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[ 0.209084] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[ 0.209124] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
[ 0.209148] pci 0000:00:01.1: enabling Extended Tags
[ 0.209191] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.209270] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
[ 0.209294] pci 0000:00:01.2: enabling Extended Tags
[ 0.209336] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.209409] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[ 0.209445] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[ 0.209481] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[ 0.209534] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.209596] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[ 0.209631] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[ 0.209667] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[ 0.209700] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[ 0.209716] pci 0000:00:07.1: enabling Extended Tags
[ 0.209742] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.209795] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[ 0.209829] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[ 0.209847] pci 0000:00:08.1: enabling Extended Tags
[ 0.209877] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.209944] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.210023] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.210105] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[ 0.210123] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[ 0.210140] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[ 0.210158] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[ 0.210176] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[ 0.210193] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[ 0.210211] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[ 0.210230] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[ 0.210397] pci 0000:01:00.0: [15b7:5006] type 00 class 0x010802
[ 0.210413] pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
[ 0.210436] pci 0000:01:00.0: reg 0x20: [mem 0xfcf04000-0xfcf040ff 64bit]
[ 0.210567] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.210571] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.210619] pci 0000:02:00.0: [1022:43ee] type 00 class 0x0c0330
[ 0.210635] pci 0000:02:00.0: reg 0x10: [mem 0xfcea0000-0xfcea7fff 64bit]
[ 0.210672] pci 0000:02:00.0: enabling Extended Tags
[ 0.210720] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.210792] pci 0000:02:00.1: [1022:43eb] type 00 class 0x010601
[ 0.210835] pci 0000:02:00.1: reg 0x24: [mem 0xfce80000-0xfce9ffff]
[ 0.210842] pci 0000:02:00.1: reg 0x30: [mem 0xfce00000-0xfce7ffff pref]
[ 0.210847] pci 0000:02:00.1: enabling Extended Tags
[ 0.210884] pci 0000:02:00.1: PME# supported from D3hot D3cold
[ 0.210937] pci 0000:02:00.2: [1022:43e9] type 01 class 0x060400
[ 0.210977] pci 0000:02:00.2: enabling Extended Tags
[ 0.211018] pci 0000:02:00.2: PME# supported from D3hot D3cold
[ 0.211086] pci 0000:00:01.2: PCI bridge to [bus 02-05]
[ 0.211088] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.211090] pci 0000:00:01.2: bridge window [mem 0xfcc00000-0xfcefffff]
[ 0.211171] pci 0000:03:04.0: [1022:43ea] type 01 class 0x060400
[ 0.211214] pci 0000:03:04.0: enabling Extended Tags
[ 0.211263] pci 0000:03:04.0: PME# supported from D3hot D3cold
[ 0.211333] pci 0000:03:08.0: [1022:43ea] type 01 class 0x060400
[ 0.211413] pci 0000:03:08.0: enabling Extended Tags
[ 0.211461] pci 0000:03:08.0: PME# supported from D3hot D3cold
[ 0.211535] pci 0000:02:00.2: PCI bridge to [bus 03-05]
[ 0.211539] pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
[ 0.211542] pci 0000:02:00.2: bridge window [mem 0xfcc00000-0xfcdfffff]
[ 0.211599] pci 0000:04:00.0: [15b7:5003] type 00 class 0x010802
[ 0.211626] pci 0000:04:00.0: reg 0x10: [mem 0xfcd00000-0xfcd03fff 64bit]
[ 0.211890] pci 0000:03:04.0: PCI bridge to [bus 04]
[ 0.211897] pci 0000:03:04.0: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.211983] pci 0000:05:00.0: [10ec:8125] type 00 class 0x020000
[ 0.212006] pci 0000:05:00.0: reg 0x10: [io 0xf000-0xf0ff]
[ 0.212037] pci 0000:05:00.0: reg 0x18: [mem 0xfcc00000-0xfcc0ffff 64bit]
[ 0.212056] pci 0000:05:00.0: reg 0x20: [mem 0xfcc10000-0xfcc13fff 64bit]
[ 0.212195] pci 0000:05:00.0: supports D1 D2
[ 0.212195] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.212355] pci 0000:03:08.0: PCI bridge to [bus 05]
[ 0.212359] pci 0000:03:08.0: bridge window [io 0xf000-0xffff]
[ 0.212361] pci 0000:03:08.0: bridge window [mem 0xfcc00000-0xfccfffff]
[ 0.212427] pci 0000:06:00.0: [1002:1478] type 01 class 0x060400
[ 0.212439] pci 0000:06:00.0: reg 0x10: [mem 0xfcb00000-0xfcb03fff]
[ 0.212522] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.212613] pci 0000:00:03.1: PCI bridge to [bus 06-08]
[ 0.212615] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.212617] pci 0000:00:03.1: bridge window [mem 0xfc900000-0xfcbfffff]
[ 0.212619] pci 0000:00:03.1: bridge window [mem 0x7800000000-0x7c0fffffff 64bit pref]
[ 0.212666] pci 0000:07:00.0: [1002:1479] type 01 class 0x060400
[ 0.212759] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.213106] pci 0000:06:00.0: PCI bridge to [bus 07-08]
[ 0.213111] pci 0000:06:00.0: bridge window [io 0xe000-0xefff]
[ 0.213113] pci 0000:06:00.0: bridge window [mem 0xfc900000-0xfcafffff]
[ 0.213117] pci 0000:06:00.0: bridge window [mem 0x7800000000-0x7c0fffffff 64bit pref]
[ 0.213170] pci 0000:08:00.0: [1002:73df] type 00 class 0x030000
[ 0.213184] pci 0000:08:00.0: reg 0x10: [mem 0x7800000000-0x7bffffffff 64bit pref]
[ 0.213193] pci 0000:08:00.0: reg 0x18: [mem 0x7c00000000-0x7c0fffffff 64bit pref]
[ 0.213199] pci 0000:08:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.213206] pci 0000:08:00.0: reg 0x24: [mem 0xfc900000-0xfc9fffff]
[ 0.213212] pci 0000:08:00.0: reg 0x30: [mem 0xfca00000-0xfca1ffff pref]
[ 0.213232] pci 0000:08:00.0: BAR 0: assigned to efifb
[ 0.213286] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.213393] pci 0000:08:00.1: [1002:ab28] type 00 class 0x040300
[ 0.213403] pci 0000:08:00.1: reg 0x10: [mem 0xfca20000-0xfca23fff]
[ 0.213476] pci 0000:08:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.213550] pci 0000:07:00.0: PCI bridge to [bus 08]
[ 0.213554] pci 0000:07:00.0: bridge window [io 0xe000-0xefff]
[ 0.213556] pci 0000:07:00.0: bridge window [mem 0xfc900000-0xfcafffff]
[ 0.213559] pci 0000:07:00.0: bridge window [mem 0x7800000000-0x7c0fffffff 64bit pref]
[ 0.213596] pci 0000:09:00.0: [1022:148a] type 00 class 0x130000
[ 0.213615] pci 0000:09:00.0: enabling Extended Tags
[ 0.213688] pci 0000:00:07.1: PCI bridge to [bus 09]
[ 0.213726] pci 0000:0a:00.0: [1022:1485] type 00 class 0x130000
[ 0.213748] pci 0000:0a:00.0: enabling Extended Tags
[ 0.213823] pci 0000:0a:00.1: [1022:1486] type 00 class 0x108000
[ 0.213834] pci 0000:0a:00.1: reg 0x18: [mem 0xfc700000-0xfc7fffff]
[ 0.213841] pci 0000:0a:00.1: reg 0x24: [mem 0xfc808000-0xfc809fff]
[ 0.213847] pci 0000:0a:00.1: enabling Extended Tags
[ 0.213913] pci 0000:0a:00.3: [1022:149c] type 00 class 0x0c0330
[ 0.213921] pci 0000:0a:00.3: reg 0x10: [mem 0xfc600000-0xfc6fffff 64bit]
[ 0.213941] pci 0000:0a:00.3: enabling Extended Tags
[ 0.213972] pci 0000:0a:00.3: PME# supported from D0 D3hot D3cold
[ 0.214020] pci 0000:0a:00.4: [1022:1487] type 00 class 0x040300
[ 0.214026] pci 0000:0a:00.4: reg 0x10: [mem 0xfc800000-0xfc807fff]
[ 0.214043] pci 0000:0a:00.4: enabling Extended Tags
[ 0.214071] pci 0000:0a:00.4: PME# supported from D0 D3hot D3cold
[ 0.214121] pci 0000:00:08.1: PCI bridge to [bus 0a]
[ 0.214124] pci 0000:00:08.1: bridge window [mem 0xfc600000-0xfc8fffff]
[ 0.214312] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.214345] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.214373] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.214409] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.214440] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.214466] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.214492] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.214517] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.214998] iommu: Default domain type: Translated
[ 0.214999] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.215070] SCSI subsystem initialized
[ 0.215076] libata version 3.00 loaded.
[ 0.215076] pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.215076] pci 0000:08:00.0: vgaarb: bridge control possible
[ 0.215076] pci 0000:08:00.0: vgaarb: setting as boot device
[ 0.215076] vgaarb: loaded
[ 0.215076] ACPI: bus type USB registered
[ 0.215076] usbcore: registered new interface driver usbfs
[ 0.215076] usbcore: registered new interface driver hub
[ 0.215076] usbcore: registered new device driver usb
[ 0.215076] pps_core: LinuxPPS API ver. 1 registered
[ 0.215076] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.215076] PTP clock support registered
[ 0.215076] EDAC MC: Ver: 3.0.0
[ 0.215076] Registered efivars operations
[ 0.215449] NetLabel: Initializing
[ 0.215449] NetLabel: domain hash size = 128
[ 0.215450] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.215456] NetLabel: unlabeled traffic allowed by default
[ 0.215458] mctp: management component transport protocol core
[ 0.215458] NET: Registered PF_MCTP protocol family
[ 0.215461] PCI: Using ACPI for IRQ routing
[ 0.218608] PCI: pci_cache_line_size set to 64 bytes
[ 0.218794] e820: reserve RAM buffer [mem 0x09bff000-0x0bffffff]
[ 0.218795] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.218796] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.218796] e820: reserve RAM buffer [mem 0xb7efa000-0xb7ffffff]
[ 0.218797] e820: reserve RAM buffer [mem 0xba2f3000-0xbbffffff]
[ 0.218797] e820: reserve RAM buffer [mem 0xbb72e000-0xbbffffff]
[ 0.218798] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[ 0.218798] e820: reserve RAM buffer [mem 0x43f380000-0x43fffffff]
[ 0.218801] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.218801] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.220415] clocksource: Switched to clocksource tsc-early
[ 0.224227] VFS: Disk quotas dquot_6.6.0
[ 0.224236] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.224270] pnp: PnP ACPI init
[ 0.224318] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.224335] system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 0.224368] system 00:02: [mem 0xfd200000-0xfd2fffff] has been reserved
[ 0.224504] system 00:04: [io 0x0280-0x028f] has been reserved
[ 0.224505] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.224506] system 00:04: [io 0x02a0-0x02af] has been reserved
[ 0.224507] system 00:04: [io 0x02b0-0x02bf] has been reserved
[ 0.224650] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.224651] system 00:05: [io 0x040b] has been reserved
[ 0.224651] system 00:05: [io 0x04d6] has been reserved
[ 0.224652] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.224653] system 00:05: [io 0x0c14] has been reserved
[ 0.224653] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.224654] system 00:05: [io 0x0c52] has been reserved
[ 0.224654] system 00:05: [io 0x0c6c] has been reserved
[ 0.224655] system 00:05: [io 0x0c6f] has been reserved
[ 0.224655] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.224656] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.224657] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.224657] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.224658] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.224658] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.224659] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.224660] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.224661] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.224662] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.224662] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.224663] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.224664] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.225018] pnp: PnP ACPI: found 6 devices
[ 0.230073] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.230107] NET: Registered PF_INET protocol family
[ 0.230199] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.231072] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.231137] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.231257] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.231305] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.231358] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.231380] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.231405] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.231443] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.231446] NET: Registered PF_XDP protocol family
[ 0.231452] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.231455] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.231459] pci 0000:03:04.0: PCI bridge to [bus 04]
[ 0.231463] pci 0000:03:04.0: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.231469] pci 0000:03:08.0: PCI bridge to [bus 05]
[ 0.231471] pci 0000:03:08.0: bridge window [io 0xf000-0xffff]
[ 0.231474] pci 0000:03:08.0: bridge window [mem 0xfcc00000-0xfccfffff]
[ 0.231480] pci 0000:02:00.2: PCI bridge to [bus 03-05]
[ 0.231481] pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
[ 0.231485] pci 0000:02:00.2: bridge window [mem 0xfcc00000-0xfcdfffff]
[ 0.231490] pci 0000:00:01.2: PCI bridge to [bus 02-05]
[ 0.231492] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.231494] pci 0000:00:01.2: bridge window [mem 0xfcc00000-0xfcefffff]
[ 0.231498] pci 0000:07:00.0: PCI bridge to [bus 08]
[ 0.231499] pci 0000:07:00.0: bridge window [io 0xe000-0xefff]
[ 0.231502] pci 0000:07:00.0: bridge window [mem 0xfc900000-0xfcafffff]
[ 0.231504] pci 0000:07:00.0: bridge window [mem 0x7800000000-0x7c0fffffff 64bit pref]
[ 0.231508] pci 0000:06:00.0: PCI bridge to [bus 07-08]
[ 0.231509] pci 0000:06:00.0: bridge window [io 0xe000-0xefff]
[ 0.231512] pci 0000:06:00.0: bridge window [mem 0xfc900000-0xfcafffff]
[ 0.231514] pci 0000:06:00.0: bridge window [mem 0x7800000000-0x7c0fffffff 64bit pref]
[ 0.231518] pci 0000:00:03.1: PCI bridge to [bus 06-08]
[ 0.231519] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.231521] pci 0000:00:03.1: bridge window [mem 0xfc900000-0xfcbfffff]
[ 0.231522] pci 0000:00:03.1: bridge window [mem 0x7800000000-0x7c0fffffff 64bit pref]
[ 0.231524] pci 0000:00:07.1: PCI bridge to [bus 09]
[ 0.231529] pci 0000:00:08.1: PCI bridge to [bus 0a]
[ 0.231530] pci 0000:00:08.1: bridge window [mem 0xfc600000-0xfc8fffff]
[ 0.231534] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.231535] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.231535] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.231536] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.231536] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.231537] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfcffffff window]
[ 0.231537] pci_bus 0000:00: resource 10 [mem 0x440000000-0x7fffffffff window]
[ 0.231538] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 0.231539] pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
[ 0.231540] pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfcefffff]
[ 0.231540] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
[ 0.231541] pci_bus 0000:03: resource 1 [mem 0xfcc00000-0xfcdfffff]
[ 0.231541] pci_bus 0000:04: resource 1 [mem 0xfcd00000-0xfcdfffff]
[ 0.231542] pci_bus 0000:05: resource 0 [io 0xf000-0xffff]
[ 0.231542] pci_bus 0000:05: resource 1 [mem 0xfcc00000-0xfccfffff]
[ 0.231543] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.231543] pci_bus 0000:06: resource 1 [mem 0xfc900000-0xfcbfffff]
[ 0.231544] pci_bus 0000:06: resource 2 [mem 0x7800000000-0x7c0fffffff 64bit pref]
[ 0.231545] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.231545] pci_bus 0000:07: resource 1 [mem 0xfc900000-0xfcafffff]
[ 0.231546] pci_bus 0000:07: resource 2 [mem 0x7800000000-0x7c0fffffff 64bit pref]
[ 0.231546] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 0.231547] pci_bus 0000:08: resource 1 [mem 0xfc900000-0xfcafffff]
[ 0.231547] pci_bus 0000:08: resource 2 [mem 0x7800000000-0x7c0fffffff 64bit pref]
[ 0.231548] pci_bus 0000:0a: resource 1 [mem 0xfc600000-0xfc8fffff]
[ 0.231813] pci 0000:08:00.1: D0 power state depends on 0000:08:00.0
[ 0.231932] PCI: CLS 64 bytes, default 64
[ 0.231935] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.231936] software IO TLB: mapped [mem 0x00000000b3418000-0x00000000b7418000] (64MB)
[ 0.231948] LVT offset 0 assigned for vector 0x400
[ 0.231961] Trying to unpack rootfs image as initramfs...
[ 0.235561] perf: AMD IBS detected (0x000003ff)
[ 0.236364] Initialise system trusted keyrings
[ 0.236369] Key type blacklist registered
[ 0.236388] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.236832] zbud: loaded
[ 0.239154] Key type asymmetric registered
[ 0.239155] Asymmetric key parser 'x509' registered
[ 0.239166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.239186] io scheduler mq-deadline registered
[ 0.239186] io scheduler kyber registered
[ 0.239200] io scheduler bfq registered
[ 0.239379] pcieport 0000:00:01.1: PME: Signaling with IRQ 25
[ 0.239410] pcieport 0000:00:01.1: AER: enabled with IRQ 25
[ 0.239488] pcieport 0000:00:01.2: PME: Signaling with IRQ 26
[ 0.239524] pcieport 0000:00:01.2: AER: enabled with IRQ 26
[ 0.239598] pcieport 0000:00:03.1: PME: Signaling with IRQ 27
[ 0.239626] pcieport 0000:00:03.1: AER: enabled with IRQ 27
[ 0.239716] pcieport 0000:00:07.1: PME: Signaling with IRQ 29
[ 0.239744] pcieport 0000:00:07.1: AER: enabled with IRQ 29
[ 0.239798] pcieport 0000:00:08.1: PME: Signaling with IRQ 30
[ 0.239828] pcieport 0000:00:08.1: AER: enabled with IRQ 30
[ 0.240339] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.240396] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.240405] ACPI: button: Power Button [PWRB]
[ 0.240419] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.240433] ACPI: button: Power Button [PWRF]
[ 0.240904] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1197
[ 0.240911] Monitor-Mwait will be used to enter C-1 state
[ 0.240912] ACPI: \_SB_.PLTF.C000: Found 2 idle states
[ 0.240956] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[ 0.241011] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[ 0.241062] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[ 0.241112] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[ 0.241163] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[ 0.241212] ACPI: \_SB_.PLTF.C00C: Found 2 idle states
[ 0.241261] ACPI: \_SB_.PLTF.C00E: Found 2 idle states
[ 0.241308] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[ 0.241347] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[ 0.241394] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[ 0.241457] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[ 0.241504] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[ 0.241550] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[ 0.241603] ACPI: \_SB_.PLTF.C00D: Found 2 idle states
[ 0.241649] ACPI: \_SB_.PLTF.C00F: Found 2 idle states
[ 0.241756] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.242298] Non-volatile memory driver v1.3
[ 0.242299] Linux agpgart interface v0.103
[ 0.242300] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 0.242737] nvme nvme0: pci function 0000:01:00.0
[ 0.242764] nvme nvme1: pci function 0000:04:00.0
[ 0.242787] ahci 0000:02:00.1: version 3.0
[ 0.243026] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[ 0.243107] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.243109] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.243317] scsi host0: ahci
[ 0.243365] scsi host1: ahci
[ 0.243403] scsi host2: ahci
[ 0.243435] scsi host3: ahci
[ 0.243465] scsi host4: ahci
[ 0.243499] scsi host5: ahci
[ 0.243512] ata1: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80100 irq 43
[ 0.243513] ata2: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80180 irq 43
[ 0.243515] ata3: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80200 irq 43
[ 0.243516] ata4: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80280 irq 43
[ 0.243517] ata5: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80300 irq 43
[ 0.243518] ata6: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80380 irq 43
[ 0.243574] ACPI: bus type drm_connector registered
[ 0.243585] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.243588] ehci-pci: EHCI PCI platform driver
[ 0.243593] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.243594] ohci-pci: OHCI PCI platform driver
[ 0.243601] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.243617] usbcore: registered new interface driver usbserial_generic
[ 0.243619] usbserial: USB Serial support registered for generic
[ 0.243648] rtc_cmos 00:03: RTC can wake from S4
[ 0.243771] rtc_cmos 00:03: registered as rtc0
[ 0.243794] rtc_cmos 00:03: setting system clock to 2022-01-22T20:58:57 UTC (1642885137)
[ 0.243801] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.243879] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.243932] efifb: probing for efifb
[ 0.243937] efifb: framebuffer at 0x7800000000, using 14400k, total 14400k
[ 0.243938] efifb: mode is 2560x1440x32, linelength=10240, pages=1
[ 0.243938] efifb: scrolling: redraw
[ 0.243939] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.243955] fbcon: Deferring console take-over
[ 0.243955] fb0: EFI VGA frame buffer device
[ 0.243967] hid: raw HID events driver (C) Jiri Kosina
[ 0.243993] ashmem: initialized
[ 0.244021] drop_monitor: Initializing network drop monitor service
[ 0.244050] Initializing XFRM netlink socket
[ 0.244084] NET: Registered PF_INET6 protocol family
[ 0.250275] nvme nvme1: 16/0/0 default/read/poll queues
[ 0.253123] nvme nvme0: 32/0/0 default/read/poll queues
[ 0.253583] nvme1n1: p1 p2 p3 p4
[ 0.255386] Freeing initrd memory: 8776K
[ 0.256933] nvme0n1: p1 p2 p3 p4
[ 0.257389] Segment Routing with IPv6
[ 0.257390] RPL Segment Routing with IPv6
[ 0.257396] In-situ OAM (IOAM) with IPv6
[ 0.257412] NET: Registered PF_PACKET protocol family
[ 0.257924] microcode: CPU0: patch_level=0x0a201016
[ 0.257929] microcode: CPU1: patch_level=0x0a201016
[ 0.257934] microcode: CPU2: patch_level=0x0a201016
[ 0.257937] microcode: CPU3: patch_level=0x0a201016
[ 0.257942] microcode: CPU4: patch_level=0x0a201016
[ 0.257946] microcode: CPU5: patch_level=0x0a201016
[ 0.257951] microcode: CPU6: patch_level=0x0a201016
[ 0.257957] microcode: CPU7: patch_level=0x0a201016
[ 0.257962] microcode: CPU8: patch_level=0x0a201016
[ 0.257966] microcode: CPU9: patch_level=0x0a201016
[ 0.257970] microcode: CPU10: patch_level=0x0a201016
[ 0.257975] microcode: CPU11: patch_level=0x0a201016
[ 0.257979] microcode: CPU12: patch_level=0x0a201016
[ 0.257981] microcode: CPU13: patch_level=0x0a201016
[ 0.257985] microcode: CPU14: patch_level=0x0a201016
[ 0.257989] microcode: CPU15: patch_level=0x0a201016
[ 0.257991] microcode: Microcode Update Driver: v2.2.
[ 0.258081] resctrl: L3 allocation detected
[ 0.258082] resctrl: MB allocation detected
[ 0.258082] resctrl: L3 monitoring detected
[ 0.258084] IPI shorthand broadcast: enabled
[ 0.258091] sched_clock: Marking stable (257791091, 285320)->(274107056, -16030645)
[ 0.258301] registered taskstats version 1
[ 0.258450] Loading compiled-in X.509 certificates
[ 0.259747] Loaded X.509 cert 'Build time autogenerated kernel key: d6eaf412b72c969625e1d3cbe342f4ad10aedf0e'
[ 0.260424] zswap: loaded using pool lz4/z3fold
[ 0.260861] Key type ._fscrypt registered
[ 0.260862] Key type .fscrypt registered
[ 0.260863] Key type fscrypt-provisioning registered
[ 0.261503] PM: Magic number: 6:188:1004
[ 0.261516] input input1: hash matches
[ 0.261568] memory memory43: hash matches
[ 0.261622] RAS: Correctable Errors collector initialized.
[ 0.550640] ata1: SATA link down (SStatus 0 SControl 330)
[ 0.862737] ata2: SATA link down (SStatus 0 SControl 330)
[ 1.177102] ata3: SATA link down (SStatus 0 SControl 330)
[ 1.239678] tsc: Refined TSC clocksource calibration: 3792.872 MHz
[ 1.239686] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d5815bbf2a, max_idle_ns: 881590783532 ns
[ 1.239726] clocksource: Switched to clocksource tsc
[ 1.484999] ata4: SATA link down (SStatus 0 SControl 330)
[ 2.519665] ata5: failed to resume link (SControl 0)
[ 2.519681] ata5: SATA link down (SStatus 0 SControl 0)
[ 2.829220] ata6: SATA link down (SStatus 0 SControl 330)
[ 2.830050] Freeing unused decrypted memory: 2036K
[ 2.830218] Freeing unused kernel image (initmem) memory: 1820K
[ 2.830220] Write protecting the kernel read-only data: 30720k
[ 2.830496] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 2.830636] Freeing unused kernel image (rodata/data gap) memory: 1432K
[ 2.850058] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.850061] rodata_test: all tests were successful
[ 2.850063] Run /init as init process
[ 2.850064] with arguments:
[ 2.850064] /init
[ 2.850065] splash
[ 2.850065] with environment:
[ 2.850065] HOME=/
[ 2.850065] TERM=linux
[ 2.850066] BOOT_IMAGE=/vmlinuz-linux-zen
[ 2.854466] fbcon: Taking over console
[ 2.854505] Console: switching to colour frame buffer device 160x45
[ 2.901966] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.901971] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 2.927183] random: fast init done
[ 2.957112] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[ 2.957269] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[ 2.957270] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.957271] usb usb1: Product: xHCI Host Controller
[ 2.957272] usb usb1: Manufacturer: Linux 5.16.2-zen1-1-zen xhci-hcd
[ 2.957272] usb usb1: SerialNumber: 0000:02:00.0
[ 2.957326] hub 1-0:1.0: USB hub found
[ 2.957337] hub 1-0:1.0: 10 ports detected
[ 2.957510] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.957512] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 2.957513] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.957542] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.957550] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
[ 2.957551] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.957551] usb usb2: Product: xHCI Host Controller
[ 2.957552] usb usb2: Manufacturer: Linux 5.16.2-zen1-1-zen xhci-hcd
[ 2.957553] usb usb2: SerialNumber: 0000:02:00.0
[ 2.957585] hub 2-0:1.0: USB hub found
[ 2.957590] hub 2-0:1.0: 4 ports detected
[ 2.957698] xhci_hcd 0000:0a:00.3: xHCI Host Controller
[ 2.957700] xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 3
[ 2.957785] xhci_hcd 0000:0a:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[ 2.957897] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[ 2.957898] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.957898] usb usb3: Product: xHCI Host Controller
[ 2.957899] usb usb3: Manufacturer: Linux 5.16.2-zen1-1-zen xhci-hcd
[ 2.957899] usb usb3: SerialNumber: 0000:0a:00.3
[ 2.957933] hub 3-0:1.0: USB hub found
[ 2.957937] hub 3-0:1.0: 4 ports detected
[ 2.958030] xhci_hcd 0000:0a:00.3: xHCI Host Controller
[ 2.958031] xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 4
[ 2.958032] xhci_hcd 0000:0a:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.958038] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.958046] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
[ 2.958047] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.958048] usb usb4: Product: xHCI Host Controller
[ 2.958048] usb usb4: Manufacturer: Linux 5.16.2-zen1-1-zen xhci-hcd
[ 2.958049] usb usb4: SerialNumber: 0000:0a:00.3
[ 2.958082] hub 4-0:1.0: USB hub found
[ 2.958086] hub 4-0:1.0: 4 ports detected
[ 3.061101] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 3.129683] systemd[1]: systemd 250.3-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 3.141414] systemd[1]: Detected architecture x86-64.
[ 3.141802] systemd[1]: Hostname set to <darkduck-arch-linux>.
[ 3.192224] systemd[1]: Queued start job for default target Graphical Interface.
[ 3.192752] systemd[1]: Created slice Slice /system/getty.
[ 3.192916] systemd[1]: Created slice Slice /system/modprobe.
[ 3.193064] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 3.193205] systemd[1]: Created slice User and Session Slice.
[ 3.193261] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.193318] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.193390] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 3.193415] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.193479] systemd[1]: Reached target Local Encrypted Volumes.
[ 3.193516] systemd[1]: Reached target Login Prompts.
[ 3.193547] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 3.193589] systemd[1]: Reached target Path Units.
[ 3.193619] systemd[1]: Reached target Remote File Systems.
[ 3.193652] systemd[1]: Reached target Slice Units.
[ 3.193684] systemd[1]: Reached target Local Verity Protected Volumes.
[ 3.193743] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.194219] systemd[1]: Listening on Process Core Dump Socket.
[ 3.194308] systemd[1]: Listening on Journal Audit Socket.
[ 3.194377] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.194451] systemd[1]: Listening on Journal Socket.
[ 3.194528] systemd[1]: Listening on Network Service Netlink Socket.
[ 3.194684] systemd[1]: Listening on udev Control Socket.
[ 3.194748] systemd[1]: Listening on udev Kernel Socket.
[ 3.195056] systemd[1]: Mounting Huge Pages File System...
[ 3.195353] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.195669] systemd[1]: Mounting Kernel Debug File System...
[ 3.195988] systemd[1]: Mounting Kernel Trace File System...
[ 3.196333] systemd[1]: Starting Create List of Static Device Nodes...
[ 3.196670] systemd[1]: Starting Load Kernel Module configfs...
[ 3.196981] systemd[1]: Starting Load Kernel Module drm...
[ 3.197314] systemd[1]: Starting Load Kernel Module fuse...
[ 3.197368] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 3.198120] systemd[1]: Starting Journal Service...
[ 3.198414] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed.
[ 3.198710] systemd[1]: Starting Generate network units from Kernel command line...
[ 3.199098] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.199761] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[ 3.200028] systemd[1]: Starting Apply Kernel Variables...
[ 3.200885] systemd[1]: Starting Coldplug All udev Devices...
[ 3.200927] EXT4-fs (nvme0n1p2): re-mounted. Opts: (null). Quota mode: none.
[ 3.202021] systemd[1]: Mounted Huge Pages File System.
[ 3.202486] fuse: init (API version 7.35)
[ 3.202808] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.203451] systemd[1]: Mounted Kernel Debug File System.
[ 3.204098] systemd[1]: Mounted Kernel Trace File System.
[ 3.204810] systemd[1]: Finished Create List of Static Device Nodes.
[ 3.205449] audit: type=1130 audit(1642885140.460:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.205535] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 3.205586] systemd[1]: Finished Load Kernel Module configfs.
[ 3.206199] audit: type=1130 audit(1642885140.460:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.206201] audit: type=1131 audit(1642885140.460:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.206280] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 3.206323] systemd[1]: Finished Load Kernel Module drm.
[ 3.206934] audit: type=1130 audit(1642885140.461:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.206935] audit: type=1131 audit(1642885140.461:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.207027] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 3.207086] systemd[1]: Finished Load Kernel Module fuse.
[ 3.207686] audit: type=1130 audit(1642885140.462:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.207689] audit: type=1131 audit(1642885140.462:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.207781] systemd[1]: Finished Generate network units from Kernel command line.
[ 3.208388] audit: type=1130 audit(1642885140.462:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-network-generator comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.208471] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 3.209071] audit: type=1130 audit(1642885140.463:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.209197] systemd[1]: Finished Apply Kernel Variables.
[ 3.210157] systemd[1]: Reached target Preparation for Network.
[ 3.211058] systemd[1]: Mounting FUSE Control File System...
[ 3.211997] systemd[1]: Mounting Kernel Configuration File System...
[ 3.212624] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
[ 3.212846] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[ 3.213139] systemd[1]: Starting Load/Save Random Seed...
[ 3.213776] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[ 3.214105] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.214924] systemd[1]: Mounted FUSE Control File System.
[ 3.215575] systemd[1]: Mounted Kernel Configuration File System.
[ 3.219189] systemd[1]: Started Journal Service.
[ 3.222187] systemd-journald[365]: Received client request to flush runtime journal.
[ 3.223391] systemd-journald[365]: File /var/log/journal/b7f323e2d2074d7888c2f58703d5afe6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 3.256391] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 3.281238] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.281242] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 3.281378] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.281444] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 3.282284] ccp 0000:0a:00.1: enabling device (0000 -> 0002)
[ 3.282429] ccp 0000:0a:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[ 3.283366] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 3.283367] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 3.321922] cryptd: max_cpu_qlen set to 1000
[ 3.322065] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.322078] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 3.322147] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 3.322152] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 3.323565] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.325173] usb 3-2: New USB device found, idVendor=174c, idProduct=2074, bcdDevice= 2.00
[ 3.325176] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 3.325177] usb 3-2: Product: ASM107x
[ 3.325179] usb 3-2: Manufacturer: Asmedia
[ 3.325622] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.325625] cfg80211: failed to load regulatory.db
[ 3.328345] AVX2 version of gcm_enc/dec engaged.
[ 3.328391] AES CTR mode by8 optimization enabled
[ 3.338544] libphy: r8169: probed
[ 3.338665] r8169 0000:05:00.0 eth0: RTL8125B, 70:85:c2:94:35:b7, XID 641, IRQ 113
[ 3.338668] r8169 0000:05:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 3.374338] hub 3-2:1.0: USB hub found
[ 3.374921] hub 3-2:1.0: 4 ports detected
[ 3.432934] Adding 16776896k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:16776896k SSFS
[ 3.438101] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.440176] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3.448060] [drm] amdgpu kernel modesetting enabled.
[ 3.450881] usb 4-2: New USB device found, idVendor=174c, idProduct=3074, bcdDevice= 2.00
[ 3.450883] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 3.450885] usb 4-2: Product: ASM107x
[ 3.450886] usb 4-2: Manufacturer: Asmedia
[ 3.451012] SVM: TSC scaling supported
[ 3.451013] kvm: Nested Virtualization enabled
[ 3.451013] SVM: kvm: Nested Paging enabled
[ 3.451021] SVM: Virtual VMLOAD VMSAVE supported
[ 3.451021] SVM: Virtual GIF supported
[ 3.451021] SVM: LBR virtualization supported
[ 3.451051] snd_hda_intel 0000:08:00.1: enabling device (0000 -> 0002)
[ 3.451232] snd_hda_intel 0000:08:00.1: Handle vga_switcheroo audio client
[ 3.451234] snd_hda_intel 0000:08:00.1: Force to non-snoop mode
[ 3.451425] snd_hda_intel 0000:0a:00.4: enabling device (0000 -> 0002)
[ 3.456586] amdgpu: Ignoring ACPI CRAT on non-APU system
[ 3.456588] amdgpu: Virtual CRAT table created for CPU
[ 3.456594] amdgpu: Topology: Add CPU node
[ 3.456632] checking generic (7800000000 e10000) vs hw (7800000000 400000000)
[ 3.456633] checking generic (7800000000 e10000) vs hw (7800000000 400000000)
[ 3.456634] fb0: switching to amdgpu from EFI VGA
[ 3.456667] Console: switching to colour dummy device 80x25
[ 3.456688] amdgpu 0000:08:00.0: vgaarb: deactivate vga console
[ 3.456717] amdgpu 0000:08:00.0: enabling device (0006 -> 0007)
[ 3.456746] [drm] initializing kernel modesetting (NAVY_FLOUNDER 0x1002:0x73DF 0x1EAE:0x6601 0xC1).
[ 3.456748] amdgpu 0000:08:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[ 3.456755] [drm] register mmio base: 0xFC900000
[ 3.456756] [drm] register mmio size: 1048576
[ 3.456768] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 3.458097] [drm] add ip block number 0 <nv_common>
[ 3.458098] [drm] add ip block number 1 <gmc_v10_0>
[ 3.458098] [drm] add ip block number 2 <navi10_ih>
[ 3.458099] [drm] add ip block number 3 <psp>
[ 3.458099] [drm] add ip block number 4 <smu>
[ 3.458100] [drm] add ip block number 5 <dm>
[ 3.458101] [drm] add ip block number 6 <gfx_v10_0>
[ 3.458101] [drm] add ip block number 7 <sdma_v5_2>
[ 3.458102] [drm] add ip block number 8 <vcn_v3_0>
[ 3.458102] [drm] add ip block number 9 <jpeg_v3_0>
[ 3.458115] amdgpu 0000:08:00.0: amdgpu: Fetched VBIOS from VFCT
[ 3.458116] amdgpu: ATOM BIOS: 113-67XA6SSD1-D01
[ 3.458122] [drm] VCN(0) decode is enabled in VM mode
[ 3.458123] [drm] VCN(0) encode is enabled in VM mode
[ 3.458126] [drm] JPEG decode is enabled in VM mode
[ 3.458162] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 3.458167] amdgpu 0000:08:00.0: amdgpu: VRAM: 12272M 0x0000008000000000 - 0x00000082FEFFFFFF (12272M used)
[ 3.458169] amdgpu 0000:08:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[ 3.458170] amdgpu 0000:08:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF
[ 3.458180] [drm] Detected VRAM RAM=12272M, BAR=16384M
[ 3.458180] [drm] RAM width 192bits GDDR6
[ 3.458213] [drm] amdgpu: 12272M of VRAM memory ready
[ 3.458214] [drm] amdgpu: 11939M of GTT memory ready.
[ 3.458217] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.458362] [drm] PCIE GART of 512M enabled (table at 0x0000008000E10000).
[ 3.464068] amdgpu 0000:08:00.0: amdgpu: PSP runtime database doesn't exist
[ 3.470147] hub 4-2:1.0: USB hub found
[ 3.470264] hub 4-2:1.0: 4 ports detected
[ 3.484229] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 3.487748] MCE: In-kernel MCE decoding enabled.
[ 3.488399] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:06:00.0/0000:07:00.0/0000:08:00.1/sound/card0/input3
[ 3.488577] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:06:00.0/0000:07:00.0/0000:08:00.1/sound/card0/input4
[ 3.488627] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:06:00.0/0000:07:00.0/0000:08:00.1/sound/card0/input5
[ 3.488656] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:06:00.0/0000:07:00.0/0000:08:00.1/sound/card0/input6
[ 3.488684] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:06:00.0/0000:07:00.0/0000:08:00.1/sound/card0/input7
[ 3.488713] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:06:00.0/0000:07:00.0/0000:08:00.1/sound/card0/input8
[ 3.489442] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 3.511034] snd_hda_codec_realtek hdaudioC1D0: ALCS1200A: SKU not ready 0x00000000
[ 3.511490] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALCS1200A: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 3.511493] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.511495] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.511496] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.511497] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 3.511498] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.511499] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.511500] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.511501] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.518267] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 3.531213] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1/input9
[ 3.531250] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1/input10
[ 3.531291] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1/input11
[ 3.531315] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1/input12
[ 3.531464] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1/input13
[ 3.531554] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1/input14
[ 3.531575] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1/input15
[ 3.553781] usb 1-4: New USB device found, idVendor=1038, idProduct=12b3, bcdDevice= 1.05
[ 3.553784] usb 1-4: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 3.553785] usb 1-4: Product: SteelSeries Arctis 1 Wireless
[ 3.553786] usb 1-4: Manufacturer: SteelSeries
[ 3.570391] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC)
[ 3.611572] intel_rapl_common: Found RAPL domain package
[ 3.611574] intel_rapl_common: Found RAPL domain core
[ 3.712549] r8169 0000:05:00.0 enp5s0: Link is Down
[ 3.729385] usb 3-2.3: new high-speed USB device number 3 using xhci_hcd
[ 3.742387] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[ 3.827295] usb 3-2.3: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 6.34
[ 3.827297] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.827298] usb 3-2.3: Product: USB2.0 Hub
[ 3.827299] usb 3-2.3: Manufacturer: VIA Labs, Inc.
[ 3.827300] usb 3-2.3: SerialNumber: 000000000
[ 3.886187] hub 3-2.3:1.0: USB hub found
[ 3.886547] hub 3-2.3:1.0: 5 ports detected
[ 3.918099] usb 4-2.3: new SuperSpeed USB device number 3 using xhci_hcd
[ 3.953970] usb 1-7: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.52
[ 3.953973] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.953974] usb 1-7: Product: USB2.0 Hub
[ 3.960977] hub 1-7:1.0: USB hub found
[ 3.964956] hub 1-7:1.0: 4 ports detected
[ 4.167396] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[ 4.474704] usb 1-8: New USB device found, idVendor=26ce, idProduct=01a2, bcdDevice= 0.00
[ 4.474707] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.474708] usb 1-8: Product: LED Controller
[ 4.474708] usb 1-8: Manufacturer: ASRock
[ 4.474709] usb 1-8: SerialNumber: A02019100900
[ 4.503726] input: SteelSeries SteelSeries Arctis 1 Wireless Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-4/1-4:1.3/0003:1038:12B3.0001/input/input16
[ 4.511457] mc: Linux media interface: v0.10
[ 4.515385] usb 1-7.2: new full-speed USB device number 5 using xhci_hcd
[ 4.555448] input: SteelSeries SteelSeries Arctis 1 Wireless as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-4/1-4:1.3/0003:1038:12B3.0001/input/input18
[ 4.555536] hid-generic 0003:1038:12B3.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [SteelSeries SteelSeries Arctis 1 Wireless] on usb-0000:02:00.0-4/input3
[ 4.559392] random: crng init done
[ 4.568514] input: ASRock LED Controller as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-8/1-8:1.0/0003:26CE:01A2.0002/input/input19
[ 4.620427] hid-generic 0003:26CE:01A2.0002: input,hidraw1: USB HID v1.10 Device [ASRock LED Controller] on usb-0000:02:00.0-8/input0
[ 4.620446] usbcore: registered new interface driver usbhid
[ 4.620447] usbhid: USB HID core driver
[ 4.705361] usb 4-2.3: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 6.34
[ 4.705363] usb 4-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.705364] usb 4-2.3: Product: USB3.0 Hub
[ 4.705365] usb 4-2.3: Manufacturer: VIA Labs, Inc.
[ 4.705366] usb 4-2.3: SerialNumber: 000000000
[ 4.734225] hub 4-2.3:1.0: USB hub found
[ 4.734445] hub 4-2.3:1.0: 4 ports detected
[ 4.741517] usbcore: registered new interface driver snd-usb-audio
[ 4.820890] usb 1-7.2: New USB device found, idVendor=1b1c, idProduct=0c0b, bcdDevice= 0.0a
[ 4.820892] usb 1-7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.820894] usb 1-7.2: Product: Lighting Node PRO
[ 4.820894] usb 1-7.2: Manufacturer: Corsair
[ 4.820895] usb 1-7.2: SerialNumber: 33600007E9947BAFA8D77C5F061C00F5
[ 4.852989] hid-generic 0003:1B1C:0C0B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Corsair Lighting Node PRO] on usb-0000:02:00.0-7.2/input0
[ 4.933398] usb 1-7.4: new high-speed USB device number 6 using xhci_hcd
[ 5.044884] usb 1-7.4: New USB device found, idVendor=1b1c, idProduct=0c1c, bcdDevice= 1.00
[ 5.044887] usb 1-7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.044888] usb 1-7.4: Product: CORSAIR iCUE Commander CORE
[ 5.044889] usb 1-7.4: Manufacturer: Corsair
[ 5.044889] usb 1-7.4: SerialNumber: 90042011300307ba35d59ae55091005f
[ 5.071948] hid-generic 0003:1B1C:0C1C.0004: hiddev98,hidraw3: USB HID v1.00 Device [Corsair CORSAIR iCUE Commander CORE] on usb-0000:02:00.0-7.4/input0
[ 5.080937] hid-generic 0003:1B1C:0C1C.0005: hiddev99,hidraw4: USB HID v1.00 Device [Corsair CORSAIR iCUE Commander CORE] on usb-0000:02:00.0-7.4/input1
[ 5.291389] kauditd_printk_skb: 34 callbacks suppressed
[ 5.291391] audit: type=1130 audit(1642885142.545:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.291394] audit: type=1131 audit(1642885142.545:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.294387] usb 3-2.3.2: new full-speed USB device number 4 using xhci_hcd
[ 5.295725] audit: type=1130 audit(1642885142.550:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.302874] audit: type=1131 audit(1642885142.557:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 5.452079] usb 3-2.3.2: New USB device found, idVendor=1ea7, idProduct=9018, bcdDevice=70.37
[ 5.452081] usb 3-2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.452082] usb 3-2.3.2: Product: SK61L
[ 5.452083] usb 3-2.3.2: Manufacturer: SK61L
[ 5.530278] [drm] Loading DMUB firmware via PSP: version=0x02020007
[ 5.541322] audit: type=1130 audit(1642885142.795:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.541326] audit: type=1131 audit(1642885142.795:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.544254] [drm] use_doorbell being set to: [true]
[ 5.544287] [drm] use_doorbell being set to: [true]
[ 5.546002] audit: type=1130 audit(1642885142.800:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.553690] audit: type=1131 audit(1642885142.808:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 5.556167] input: SK61L SK61L as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.0/0003:1EA7:9018.0006/input/input20
[ 5.559297] [drm] Found VCN firmware Version ENC: 1.16 DEC: 2 VEP: 0 Revision: 1
[ 5.559303] amdgpu 0000:08:00.0: amdgpu: Will use PSP to load VCN firmware
[ 5.607651] hid-generic 0003:1EA7:9018.0006: input,hidraw5: USB HID v1.10 Keyboard [SK61L SK61L] on usb-0000:0a:00.3-2.3.2/input0
[ 5.611224] input: SK61L SK61L Mouse as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.1/0003:1EA7:9018.0007/input/input22
[ 5.611359] input: SK61L SK61L Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.1/0003:1EA7:9018.0007/input/input23
[ 5.662444] input: SK61L SK61L Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.1/0003:1EA7:9018.0007/input/input25
[ 5.662496] hid-generic 0003:1EA7:9018.0007: input,hiddev100,hidraw6: USB HID v1.10 Mouse [SK61L SK61L] on usb-0000:0a:00.3-2.3.2/input1
[ 5.666195] hid-generic 0003:1EA7:9018.0008: hiddev101,hidraw7: USB HID v1.10 Device [SK61L SK61L] on usb-0000:0a:00.3-2.3.2/input2
[ 5.671847] mousedev: PS/2 mouse device common for all mice
[ 5.740133] [drm] reserve 0xa00000 from 0x82fe000000 for PSP TMR
[ 5.791616] audit: type=1130 audit(1642885143.046:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.791620] audit: type=1131 audit(1642885143.046:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.792404] usb 3-2.3.3: new full-speed USB device number 5 using xhci_hcd
[ 5.823609] amdgpu 0000:08:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 5.834712] amdgpu 0000:08:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 5.834731] amdgpu 0000:08:00.0: amdgpu: smu driver if version = 0x0000000e, smu fw if version = 0x00000012, smu fw version = 0x00412e00 (65.46.0)
[ 5.834734] amdgpu 0000:08:00.0: amdgpu: SMU driver if version not matched
[ 5.834737] amdgpu 0000:08:00.0: amdgpu: use vbios provided pptable
[ 5.890266] amdgpu 0000:08:00.0: amdgpu: SMU is initialized successfully!
[ 5.890464] [drm] Display Core initialized with v3.2.160!
[ 5.891611] [drm] DMUB hardware initialized: version=0x02020007
[ 5.952079] usb 3-2.3.3: New USB device found, idVendor=0951, idProduct=1727, bcdDevice=11.04
[ 5.952082] usb 3-2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.952083] usb 3-2.3.3: Product: HyperX Pulsefire Haste
[ 5.952084] usb 3-2.3.3: Manufacturer: Kingston
[ 6.099156] input: Kingston HyperX Pulsefire Haste as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.3/3-2.3.3:1.0/0003:0951:1727.0009/input/input26
[ 6.099216] hid-generic 0003:0951:1727.0009: input,hidraw8: USB HID v1.11 Mouse [Kingston HyperX Pulsefire Haste] on usb-0000:0a:00.3-2.3.3/input0
[ 6.103315] input: Kingston HyperX Pulsefire Haste System Control as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.3/3-2.3.3:1.1/0003:0951:1727.000A/input/input27
[ 6.133142] [drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc line:479
[ 6.134540] snd_hda_intel 0000:08:00.1: bound 0000:08:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 6.154456] input: Kingston HyperX Pulsefire Haste Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.3/3-2.3.3:1.1/0003:0951:1727.000A/input/input28
[ 6.154492] input: Kingston HyperX Pulsefire Haste as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.3/3-2.3.3:1.1/0003:0951:1727.000A/input/input29
[ 6.154547] hid-generic 0003:0951:1727.000A: input,hiddev102,hidraw9: USB HID v1.11 Device [Kingston HyperX Pulsefire Haste] on usb-0000:0a:00.3-2.3.3/input1
[ 6.157171] input: Kingston HyperX Pulsefire Haste as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-2/3-2.3/3-2.3.3/3-2.3.3:1.2/0003:0951:1727.000B/input/input30
[ 6.208456] hid-generic 0003:0951:1727.000B: input,hidraw10: USB HID v1.11 Keyboard [Kingston HyperX Pulsefire Haste] on usb-0000:0a:00.3-2.3.3/input2
[ 6.208487] usbhid 3-2.3.3:1.3: couldn't find an input interrupt endpoint
[ 6.272401] usb 3-2.3.5: new high-speed USB device number 6 using xhci_hcd
[ 6.351438] usb 3-2.3.5: New USB device found, idVendor=2109, idProduct=8883, bcdDevice= 0.01
[ 6.351442] usb 3-2.3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.351444] usb 3-2.3.5: Product: USB Billboard Device
[ 6.351445] usb 3-2.3.5: Manufacturer: VIA Labs, Inc.
[ 6.351446] usb 3-2.3.5: SerialNumber: 0000000000000001
[ 6.418158] [drm] kiq ring mec 2 pipe 1 q 0
[ 6.421651] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[ 6.422389] [drm] JPEG decode initialized successfully.
[ 6.423764] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 6.453932] memmap_init_zone_device initialised 3145728 pages in 12ms
[ 6.453938] amdgpu: HMM registered 12272MB device memory
[ 6.454186] amdgpu: SRAT table not found
[ 6.454187] amdgpu: Virtual CRAT table created for GPU
[ 6.454263] amdgpu: Topology: Add dGPU node [0x73df:0x1002]
[ 6.454266] kfd kfd: amdgpu: added device 1002:73df
[ 6.454284] amdgpu 0000:08:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 10, active_cu_number 40
[ 6.457521] [drm] fb mappable at 0x7800FDF000
[ 6.457522] [drm] vram apper at 0x7800000000
[ 6.457523] [drm] size 14745600
[ 6.457523] [drm] fb depth is 24
[ 6.457523] [drm] pitch is 10240
[ 6.457565] fbcon: amdgpudrmfb (fb0) is primary device
[ 6.698781] [drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc line:479
[ 6.808228] Console: switching to colour frame buffer device 160x45
[ 6.827333] amdgpu 0000:08:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 6.835433] amdgpu 0000:08:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 6.835434] amdgpu 0000:08:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 6.835435] amdgpu 0000:08:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 6.835436] amdgpu 0000:08:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[ 6.835437] amdgpu 0000:08:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[ 6.835437] amdgpu 0000:08:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[ 6.835438] amdgpu 0000:08:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[ 6.835438] amdgpu 0000:08:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[ 6.835439] amdgpu 0000:08:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[ 6.835440] amdgpu 0000:08:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[ 6.835441] amdgpu 0000:08:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[ 6.835441] amdgpu 0000:08:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
[ 6.835442] amdgpu 0000:08:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 1
[ 6.835443] amdgpu 0000:08:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1
[ 6.835444] amdgpu 0000:08:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1
[ 6.835444] amdgpu 0000:08:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1
[ 6.836859] [drm] Initialized amdgpu 3.44.0 20150101 for 0000:08:00.0 on minor 0
[ 6.869867] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.869877] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 41.266804] audit: type=1130 audit(1642885178.521:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 47.435908] audit: type=1100 audit(1642885184.690:56): pid=602 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="darkduck" exe="/usr/bin/login" hostname=darkduck-arch-linux addr=? terminal=/dev/tty2 res=success'
[ 47.436942] audit: type=1101 audit(1642885184.691:57): pid=602 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/bin/login" hostname=darkduck-arch-linux addr=? terminal=/dev/tty2 res=success'
[ 47.437434] audit: type=1103 audit(1642885184.692:58): pid=602 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="darkduck" exe="/usr/bin/login" hostname=darkduck-arch-linux addr=? terminal=/dev/tty2 res=success'
[ 47.437482] audit: type=1006 audit(1642885184.692:59): pid=602 uid=0 old-auid=4294967295 auid=1000 tty=tty2 old-ses=4294967295 ses=1 res=1
[ 47.437488] audit: type=1300 audit(1642885184.692:59): arch=c000003e syscall=1 success=yes exit=4 a0=5 a1=7fffa2fbd7c0 a2=4 a3=3e8 items=0 ppid=1 pid=602 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=1000 fsgid=0 tty=tty2 ses=1 comm="login" exe="/usr/bin/login" key=(null)
[ 47.437490] audit: type=1327 audit(1642885184.692:59): proctitle=2F62696E2F6C6F67696E002D70002D2D
[ 47.445634] audit: type=1130 audit(1642885184.700:60): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 47.448027] audit: type=1101 audit(1642885184.702:61): pid=604 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 47.448039] audit: type=1103 audit(1642885184.702:62): pid=604 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="darkduck" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 47.448056] audit: type=1006 audit(1642885184.702:63): pid=604 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 47.493657] systemd-journald[365]: File /var/log/journal/b7f323e2d2074d7888c2f58703d5afe6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 545.003645] kauditd_printk_skb: 10 callbacks suppressed
[ 545.003648] audit: type=1101 audit(1642885682.258:70): pid=615 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/bin/sudo" hostname=darkduck-arch-linux addr=? terminal=/dev/tty2 res=success'
[ 545.003859] audit: type=1110 audit(1642885682.258:71): pid=615 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=darkduck-arch-linux addr=? terminal=/dev/tty2 res=success'
[ 545.003904] audit: type=1105 audit(1642885682.258:72): pid=615 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=darkduck-arch-linux addr=? terminal=/dev/tty2 res=success'
[ 547.536616] audit: type=1106 audit(1642885684.791:73): pid=615 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=darkduck-arch-linux addr=? terminal=/dev/tty2 res=success'
[ 547.536640] audit: type=1104 audit(1642885684.791:74): pid=615 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=darkduck-arch-linux addr=? terminal=/dev/tty2 res=success'
[ 630.524500] audit: type=1101 audit(1642885767.779:75): pid=619 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/bin/sudo" hostname=darkduck-arch-linux addr=? terminal=/dev/tty2 res=success'
[ 630.524731] audit: type=1110 audit(1642885767.779:76): pid=619 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=darkduck-arch-linux addr=? terminal=/dev/tty2 res=success'
[ 630.524776] audit: type=1105 audit(1642885767.779:77): pid=619 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=darkduck-arch-linux addr=? terminal=/dev/tty2 res=success'
[ 631.163108] audit: type=1103 audit(1642885768.417:78): pid=651 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 631.163664] audit: type=1105 audit(1642885768.418:79): pid=651 uid=0 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_unix,pam_systemd acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 718.524357] audit: type=1100 audit(1642885855.778:80): pid=690 uid=0 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock acct="darkduck" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 718.524442] audit: type=1101 audit(1642885855.779:81): pid=690 uid=0 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 718.537781] audit: type=1106 audit(1642885855.792:82): pid=651 uid=0 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_unix,pam_systemd acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 718.537804] audit: type=1104 audit(1642885855.792:83): pid=651 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 718.539059] audit: type=1103 audit(1642885855.793:84): pid=690 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock acct="darkduck" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 718.539919] audit: type=1105 audit(1642885855.794:85): pid=690 uid=0 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_systemd_home,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="darkduck" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 718.541175] audit: type=1112 audit(1642885855.795:86): pid=690 uid=0 auid=1000 ses=1 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=darkduck-arch-linux addr=? terminal=/dev/tty7 res=success'
[ 901.689472] audit: type=1130 audit(1642886038.944:87): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 901.689477] audit: type=1131 audit(1642886038.944:88): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2594.692748] audit: type=1130 audit(1642887731.947:89): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4387.274096] audit: type=1101 audit(1642889524.528:90): pid=7052 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4398.266515] audit: type=1101 audit(1642889535.520:91): pid=7055 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4398.266628] audit: type=1110 audit(1642889535.521:92): pid=7055 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4398.266675] audit: type=1105 audit(1642889535.521:93): pid=7055 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4398.267242] audit: type=1106 audit(1642889535.521:94): pid=7055 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4398.267245] audit: type=1104 audit(1642889535.521:95): pid=7055 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4439.021046] audit: type=1101 audit(1642889576.275:96): pid=7073 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4439.021169] audit: type=1110 audit(1642889576.275:97): pid=7073 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4439.021205] audit: type=1105 audit(1642889576.275:98): pid=7073 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4439.021739] audit: type=1106 audit(1642889576.276:99): pid=7073 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4439.021751] audit: type=1104 audit(1642889576.276:100): pid=7073 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4518.713905] audit: type=1101 audit(1642889655.968:101): pid=7085 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4518.714055] audit: type=1110 audit(1642889655.968:102): pid=7085 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4518.714116] audit: type=1105 audit(1642889655.968:103): pid=7085 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4518.714713] audit: type=1106 audit(1642889655.969:104): pid=7085 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4518.714716] audit: type=1104 audit(1642889655.969:105): pid=7085 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4540.864202] audit: type=1101 audit(1642889678.118:106): pid=7094 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4540.864429] audit: type=1110 audit(1642889678.118:107): pid=7094 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4540.864465] audit: type=1105 audit(1642889678.118:108): pid=7094 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4540.865007] audit: type=1106 audit(1642889678.119:109): pid=7094 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4540.865010] audit: type=1104 audit(1642889678.119:110): pid=7094 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4594.550630] audit: type=1101 audit(1642889731.805:111): pid=7101 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4594.550840] audit: type=1110 audit(1642889731.805:112): pid=7101 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4594.550874] audit: type=1105 audit(1642889731.805:113): pid=7101 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4594.551360] audit: type=1106 audit(1642889731.805:114): pid=7101 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4594.551363] audit: type=1104 audit(1642889731.805:115): pid=7101 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4619.518452] audit: type=1101 audit(1642889756.772:116): pid=7104 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4619.518455] audit: type=1110 audit(1642889756.772:117): pid=7104 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4619.518457] audit: type=1105 audit(1642889756.772:118): pid=7104 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4619.518929] audit: type=1106 audit(1642889756.773:119): pid=7104 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4619.518932] audit: type=1104 audit(1642889756.773:120): pid=7104 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4678.564774] audit: type=1101 audit(1642889815.819:121): pid=7136 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="darkduck" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4678.564802] audit: type=1110 audit(1642889815.819:122): pid=7136 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 4678.564853] audit: type=1105 audit(1642889815.819:123): pid=7136 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'Offline
Offline
let me check, could be because if i manually try to start lightdm it starts
Offline
ok solved thak you very much, however i am having weird tearing and sound issues with this installation, things that didn't happened in the past, i wonder if the actual problem could be something else
Offline
Pages: 1