[SOLVED]Display after update stuck at 60hz

Tech-Man · 2022-01-30 15:47:19

i tried to use gnome instead of kde and using xrandr and using nvidia x-server-settings but i cant change it

Last edited by Tech-Man (2022-01-31 12:19:31)

ewaller · 2022-01-30 16:22:09

Gnome is probably using Wayland, not Xorg. Are you forcing Gnome on to Xorg? If not x-server-settings is not going to be fruitful.

Tech-Man · 2022-01-30 16:54:13

yes i did

seth · 2022-01-30 17:30:01

Multihead?
https://gitlab.gnome.org/GNOME/mutter/-/issues/1470

Edit: also output of

xrandr -q

please.

Last edited by seth (2022-01-30 17:30:46)

Tech-Man · 2022-01-30 17:42:49

i use kde and im sure its not a wm issue and my display is capable of 165hz

Screen 0: minimum 320 x 200, current 2560 x 1600, maximum 16384 x 16384
eDP-1 connected primary 2560x1600+0+0 (normal left inverted right x axis y axis) 345mm x 215mm
   2560x1600     60.01*+  59.99    59.97  
   2560x1440     59.99    59.99    59.96    59.95  
   2048x1536     60.00  
   1920x1440     60.00  
   1856x1392     60.01  
   1792x1344     60.01  
   2048x1152     59.99    59.98    59.90    59.91  
   1920x1200     59.88    59.95  
   1920x1080     60.01    59.97    59.96    59.93  
   1600x1200     60.00  
   1680x1050     59.95    59.88  
   1400x1050     59.98  
   1600x900      59.99    59.94    59.95    59.82  
   1280x1024     60.02  
   1400x900      59.96    59.88  
   1280x960      60.00  
   1440x810      60.00    59.97  
   1368x768      59.88    59.85  
   1280x800      59.99    59.97    59.81    59.91  
   1280x720      60.00    59.99    59.86    59.74  
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   1024x576      59.95    59.96    59.90    59.82  
   960x600       59.93    60.00  
   960x540       59.96    59.99    59.63    59.82  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   864x486       59.92    59.57  
   700x525       59.98  
   800x450       59.95    59.82  
   640x512       60.02  
   700x450       59.96    59.88  
   640x480       60.00    59.94  
   720x405       59.51    58.99  
   684x384       59.88    59.85  
   640x400       59.88    59.98  
   640x360       59.86    59.83    59.84    59.32  
   512x384       60.00  
   512x288       60.00    59.92  
   480x270       59.63    59.82  
   400x300       60.32    56.34  
   432x243       59.92    59.57  
   320x240       60.05  
   360x202       59.51    59.13  
   320x180       59.84    59.32  
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)
DP-1-0 disconnected (normal left inverted right x axis y axis)
DP-1-1 disconnected (normal left inverted right x axis y axis)
DP-1-2 disconnected (normal left inverted right x axis y axis)
DP-1-3 disconnected (normal left inverted right x axis y axis)
HDMI-1-0 disconnected (normal left inverted right x axis y axis)
DP-1-4 disconnected (normal left inverted right x axis y axis)

Last edited by Tech-Man (2022-01-30 17:43:48)

seth · 2022-01-30 18:04:18

Like ewaller I probably misinterpreted the conditions expressed in your OP - and no, that's not a WM problem.
Please post your xorg log.

Is this a https://wiki.archlinux.org/title/Variable_refresh_rate output?

Last edited by seth (2022-01-30 18:04:40)

Tech-Man · 2022-01-30 18:16:51

here is my xorg log
https://pastebin.com/qwUSiLu8

seth · 2022-01-30 20:50:22

Feeding the EDID into http://www.edidreader.com/ gets you

Detailed Timing Descriptor
Pixel Clock: 282.7MHz
Horizontal Active: 2560
Horizontal Blanking: 160
Vertical Active: 1600
Vertical Blanking: 132
Horizontal Sync Offset: 48
Horizontal Sync Pulse: 32
Vertical Sync Offset: 3
Vertical Sync Pulse: 6
Horizontal Display Size: 345
Vertical Display Size: 215
Horizontal Border: 0
Vertical Border: 0
Interlaced: false
Stereo Mode: 0
Sync Type: 3

2560x1600 at a 282.7MHz pclk matches 60Hz - where did you get the idea that the panel can operate at higher frequencies?

Tech-Man · 2022-01-30 20:51:39

bec it used to and does operate in windows

seth · 2022-01-30 20:56:06

Try the LTS kernel - but from that EDID, xorg won't offer you higher frequencies.

Tech-Man · 2022-01-30 20:57:10

but it used to work

progandy · 2022-01-30 21:01:20

The edid shows 60-165 Hz as a bare limit and there is a "DisplayID Extension Block" that shows a mode with 165Hz.

$ clipget | awk '{print $5}' | tr -d \\n | edid-decode | clipput
edid-decode (hex):

00 ff ff ff ff ff ff 00 0e 6f 06 16 00 00 00 00
00 1e 01 04 b5 22 16 78 03 ee 95 a3 54 4c 99 26
0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 6e 6e 00 a0 a0 40 84 60 30 20
36 00 59 d7 10 00 00 18 00 00 00 fd 0c 3c a5 1f
1f 4e 01 0a 20 20 20 20 20 20 00 00 00 fe 00 43
53 4f 54 20 54 33 0a 20 20 20 20 20 00 00 00 fe
00 4d 4e 47 30 30 37 44 41 31 2d 36 0a 20 02 f7

02 03 1d 00 e3 05 80 00 e6 06 05 01 6a 6a 24 6d
1a 00 00 02 03 3c a5 00 04 6a 24 6a 24 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff

70 13 79 00 00 03 01 14 ac 2f 01 85 ff 09 9f 00
2f 00 1f 00 3f 06 83 00 02 00 05 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 37 90

----------------

Block 0, Base EDID:
  EDID Structure Version & Revision: 1.4
  Vendor & Product Identification:
    Manufacturer: CSO
    Model: 5638
    Made in: 2020
  Basic Display Parameters & Features:
    Digital display
    Bits per primary color channel: 10
    DisplayPort interface
    Maximum image size: 34 cm x 22 cm
    Gamma: 2.20
    Supported color formats: RGB 4:4:4
    First detailed timing includes the native pixel format and preferred refresh rate
    Display is continuous frequency
  Color Characteristics:
    Red  : 0.6396, 0.3300
    Green: 0.2998, 0.5996
    Blue : 0.1503, 0.0595
    White: 0.3134, 0.3291
  Established Timings I & II: none
  Standard Timings: none
  Detailed Timing Descriptors:
    DTD 1:  2560x1600   60.008 Hz   8:5   103.934 kHz 282.700 MHz (345 mm x 215 mm)
                 Hfront   48 Hsync  32 Hback  80 Hpol N
                 Vfront    3 Vsync   6 Vback 123 Vpol N
  Display Range Limits:
    Monitor ranges (Bare Limits): 60-165 Hz V, 286-286 kHz H, max dotclock 780 MHz
    Alphanumeric Data String: 'CSOT T3'
    Alphanumeric Data String: 'MNG007DA1-6'
  Extension blocks: 2
Checksum: 0xf7

----------------

Block 1, CTA-861 Extension Block:
  Revision: 3
  Native detailed modes: 0
  Colorimetry Data Block:
    BT2020RGB
  HDR Static Metadata Data Block:
    Electro optical transfer functions:
      Traditional gamma - SDR luminance range
      SMPTE ST2084
    Supported static metadata descriptors:
      Static metadata type 1
    Desired content max luminance: 106 (496.743 cd/m^2)
    Desired content max frame-average luminance: 106 (496.743 cd/m^2)
    Desired content min luminance: 36 (0.099 cd/m^2)
  Vendor-Specific Data Block (AMD), OUI 00-00-1A:
    02 03 3c a5 00 04 6a 24 6a 24                   '..<...j$j$'
Checksum: 0xff

----------------

Block 2, DisplayID Extension Block:
  Version: 1.3
  Extension Count: 0
  Display Product Type: Extension Section
  Video Timing Modes Type 1 - Detailed Timings Data Block:
    DTD:  2560x1600  165.019 Hz  16:10  285.812 kHz 777.410 MHz (aspect 16:10, no 3D stereo, preferred)
               Hfront   48 Hsync  32 Hback  80 Hpol N
               Vfront    3 Vsync   6 Vback 123 Vpol N
  Checksum: 0x37
Checksum: 0x90

Tech-Man · 2022-01-30 21:03:33

that proves it

seth · 2022-01-30 21:11:49

It proves that the online decover is unreliable.

@progandy, I'm not blind, am I?
The online parser omits the second block? (Though I just installed edid-decode

@Tech-Man
What did you update to cause the failure?
In case the LTS kernel doesn't help and since this is an optimus system, did you maybe change the primary GPU?

Tech-Man · 2022-01-30 21:13:29

no i just did yay -Syu and some theming in kde

seth · 2022-01-30 21:18:46

And what did "yay -Syu" update? (… check the pacman log)

progandy · 2022-01-30 21:23:16

seth wrote:

It proves that the online decover is unreliable.
@progandy, I'm not blind, am I?
The online parser omits the second block? (Though I just installed edid-decode

That online parser seems to be missing support for the DisplayID extension, you are not blind

Tech-Man · 2022-01-30 21:23:25

kernel and nvidia drivers

seth · 2022-01-30 21:40:11

The nvidia driver should not matter since the output is on the intel chip, so try the LTS kernel (you'll also want to install nvidia-lts to be able to use the chip regardless of the output situation)

Tech-Man · 2022-01-30 23:00:15

wait it works now do you know why the new kernel broke my display
but when i test it using https://www.testufo.com/refreshrate and https://www.displayhz.com/ it gives me 60hz
but when i use https://devicetests.com/refresh-rate-test it gives me about 183~hz

Last edited by Tech-Man (2022-01-30 23:09:45)

seth · 2022-01-31 07:39:25

The relevant data is first and foremost "xrandr -q" and the xorg log, the test thingies will measure the swap interval which is influenced by the browser and the compositor.

Tech-Man · 2022-01-31 10:53:46

So it works now right

seth · 2022-01-31 12:17:53

You're aware that those posts provide no meaningful information whatsoever?

Tech-Man · 2022-01-31 12:19:01

ok it works now

Arch Linux

#1 2022-01-30 15:47:19

[SOLVED]Display after update stuck at 60hz

#2 2022-01-30 16:22:09

Re: [SOLVED]Display after update stuck at 60hz

#3 2022-01-30 16:54:13

Re: [SOLVED]Display after update stuck at 60hz

#4 2022-01-30 17:30:01

Re: [SOLVED]Display after update stuck at 60hz

#5 2022-01-30 17:42:49

Re: [SOLVED]Display after update stuck at 60hz

#6 2022-01-30 18:04:18

Re: [SOLVED]Display after update stuck at 60hz

#7 2022-01-30 18:16:51

Re: [SOLVED]Display after update stuck at 60hz

#8 2022-01-30 20:50:22

Re: [SOLVED]Display after update stuck at 60hz

#9 2022-01-30 20:51:39

Re: [SOLVED]Display after update stuck at 60hz

#10 2022-01-30 20:56:06

Re: [SOLVED]Display after update stuck at 60hz

#11 2022-01-30 20:57:10

Re: [SOLVED]Display after update stuck at 60hz

#12 2022-01-30 21:01:20

Re: [SOLVED]Display after update stuck at 60hz

#13 2022-01-30 21:03:33

Re: [SOLVED]Display after update stuck at 60hz

#14 2022-01-30 21:11:49

Re: [SOLVED]Display after update stuck at 60hz

#15 2022-01-30 21:13:29

Re: [SOLVED]Display after update stuck at 60hz

#16 2022-01-30 21:18:46

Re: [SOLVED]Display after update stuck at 60hz

#17 2022-01-30 21:23:16

Re: [SOLVED]Display after update stuck at 60hz

#18 2022-01-30 21:23:25

Re: [SOLVED]Display after update stuck at 60hz

#19 2022-01-30 21:40:11

Re: [SOLVED]Display after update stuck at 60hz

#20 2022-01-30 23:00:15

Re: [SOLVED]Display after update stuck at 60hz

#21 2022-01-31 07:39:25

Re: [SOLVED]Display after update stuck at 60hz

#22 2022-01-31 10:53:46

Re: [SOLVED]Display after update stuck at 60hz

#23 2022-01-31 12:17:53

Re: [SOLVED]Display after update stuck at 60hz

#24 2022-01-31 12:19:01

Re: [SOLVED]Display after update stuck at 60hz

Board footer