You are not logged in.
Pages: 1
helo,
I have an "aethra starmodem" with ethernet and usb ports, now I used only ethernet port (eth0) with arch...
then I try simplymepis, and then reboot......
I found eth0 on ethernet and eth1 on usb....
and all they work OK, alternatively ....!!!!!!!!!!!!
I say... I want they work Ok on Arch too ....
in simplymepis dmesg I have :
...
usbcore: registered new driver cdc_ether
eth1: register 'rndis_host' at usb-0000:00:10.0-2, RNDIS device, 00:e0:a6:66:41:
e1
usbcore: registered new driver rndis_host
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 pr
oto 2 vid 0x043D pid 0x009F
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
...
...
what can I do to start at boot eth1 too on Arch ?
thank you in advance
(sorry for my english)
Offline
in rc.conf I insert
to load module: rndis_host
and
eth1="192.168.1.10 netmask 255.255.255.0"
but whe systrem start network service I have error:
eth1 device not found
????
Offline
The module is cdc_ether, not rndis_host.
Offline
I load module
cdc_ether
and I restart /etc/rc.d/network restart
error is
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
192.168.1.10: unknown interface: No such device
192.168.1.10: unknown interface: No such device
Offline
Do you need to load module 'usbnet'. I needed that for a router/modem once.
larch: http://larch.berlios.de
Offline
I run:
[root@underground ~]# modprobe cdc_ether
[root@underground ~]# modprobe usbnet
[root@underground ~]# /etc/rc.d/network restart
:: Stopping Network [BUSY] SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
192.168.1.10: unknown interface: No such device
192.168.1.10: unknown interface: No such device
Offline
is simplemepis better than arch in hardware detection ?
?????
Offline
who can help me ?
Offline
in lshwd I found
001:004 USB Communications: TI RNDIS Network Adapter (unknown)
and
lsmod | grep rndis
rndis_host 5504 0
cdc_ether 5376 1 rndis_host
usbnet 12808 2 rndis_host,cdc_ether
usbcore 104196 9 ohci_hcd,usbserial,usblp,ehci_hcd,uhci_hcd,rndis_host,cdc_ether,usbnet
Offline
but I have to modify udev rules ?
# USB devices
KERNEL=="hiddev*", NAME="usb/%k"
KERNEL=="auer*", NAME="usb/%k"
KERNEL=="legousbtower*", NAME="usb/%k", MODE="0666"
KERNEL=="dabusb*", NAME="usb/%k"
SUBSYSTEMS=="usb", KERNEL=="lp[0-9]*", NAME="usb/%k", GROUP="lp"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{product}=="Palm Handheld*", SYMLINK+
="pilot"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{product}=="palmOne Handheld*", SYMLI
NK+="pilot"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{product}=="Handspring Visor*", SYMLI
NK+="pilot"
...
...
# usb devices
SUBSYSTEMS=="usb", IMPORT{program}="usb_id -x"
SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="03", ATTRS{bInterfaceProtocol}=="01"
, ENV{ID_CLASS}="kbd"
SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="03", ATTRS{bInterfaceProtocol}=="02"
, ENV{ID_CLASS}="mouse"
..
Offline
and pppoa ?
can it create device eth1 ?
Offline
or may be:
ndiswrapper ?
Offline
helo....
I know my modem/router is a chip conexant and not chip globespan
then I know that eciadsl is not for me but are OK conexant driver:
usbnet
+
cxacru
but still never works OK ....
but casually I run:
eciadsl-start
and stop it ....
in dmesg I read
eth1: register 'rndis_host' at usb-0000:00:10.0-2, RNDIS device, 00:e0:a6:66:41:e1
biiiiingoooooooo
how can I retrieve comand in script eciadsl that active device eth1 ?
thankyou
Offline
how can I debug eciadsl-start script to discover witch command enable eth1 device ?
Offline
Pages: 1