You are not logged in.

Pages: 1

#1 2022-02-14 12:39:48

luca120
Member
Registered: 2022-02-14
Posts: 14

[solved]xorg won't start

Hello to all,

i'm a italian guy than try to install archlinux with KDE gui interface, unfurtunatly I'm not eable to reconize where is the issue and how can I solve it.

sby starting from the beginninnng:

pc model is: HP 8540 elitebook with nvidia quadro FX 880M

driver installed ( but not enabled during boot)

nvidia driver
nouveau
xorg

which is the issue?

if I try to run the command below:

systemctl enable sddm

during first boot my pc will show only the black screen, for back to the normal console I need to use a usb stick with chroot and disable it
if I try to execute the command:

systemctl start sddm issue will be:


deamon: initializing

deamon: starting

deamon: loading interface found

deamon: adding new display on vt 1

deamon: .......

deamon: .......

deamon: (EE) failed to write xauth file


instand of if I try to run startx issue will be: Black screen again.


so, i'm close to the corner to remove all system and install other distribution, but I want to know WHY i have this issue sad

could help me to solve the issue sad:(:(?

thanks in advance to all guy that want help me smile

and sorry for my english wink

p.s.: how can I post some pictures? by this why is more easly to show which problem I have

Luca

Last edited by luca120 (2022-02-14 18:01:03)

Offline

#2 2022-02-14 12:59:43

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,088

Re: [solved]xorg won't start

You can link to pictures hosted somewhere else (don't embed them directly), or better yet post logs, like a xorg log to a pastebin site: https://wiki.archlinux.org/title/List_o … n_services

This is a very old GPU, from an "official" capacity only supported by the nvidia-340xx package which you'd install from the AUR. This can be a bit involved for someone new, so you should try nouveau first, which would mean you need to uninstall/remove all nvidia packages you currently have installed.

Offline

#3 2022-02-14 14:09:26

luca120
Member
Registered: 2022-02-14
Posts: 14

Re: [solved]xorg won't start

V1del wrote:

You can link to pictures hosted somewhere else (don't embed them directly), or better yet post logs, like a xorg log to a pastebin site: https://wiki.archlinux.org/title/List_o … n_services

This is a very old GPU, from an "official" capacity only supported by the nvidia-340xx package which you'd install from the AUR. This can be a bit involved for someone new, so you should try nouveau first, which would mean you need to uninstall/remove all nvidia packages you currently have installed.


Hello V1del, I have installed just today all packages related to nvidia driver, also by keep only the neouveau driver issue still black screen sad

If I remove all nvidia packages what I should do for fix this kind of issue?

below all pictures

SDDM issue (not consider the 340xx) already removed all driver and now i'm using a nouveau driver but issue is the same wink :

IMG-20220214-012320.jpg


Xorg issue:

[  1127.639] 
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[  1127.640] Current Operating System: Linux 8540w 5.16.8-arch1-1 #1 SMP PREEMPT Tue, 08 Feb 2022 21:21:08 +0000 x86_64
[  1127.640] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f1706be0-180f-413f-9f83-8416b77e044b rw loglevel=3 quiet
[  1127.641]  
[  1127.641] Current version of pixman: 0.40.0
[  1127.642] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1127.642] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1127.644] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 14 14:29:33 2022
[  1127.645] (++) Using config file: "/root/xorg.conf.new"
[  1127.645] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1127.645] (==) ServerLayout "X.org Configured"
[  1127.645] (**) |-->Screen "Screen0" (0)
[  1127.645] (**) |   |-->Monitor "Monitor0"
[  1127.646] (**) |   |-->Device "Card0"
[  1127.646] (**) |-->Input Device "Mouse0"
[  1127.646] (**) |-->Input Device "Keyboard0"
[  1127.646] (==) Automatically adding devices
[  1127.646] (==) Automatically enabling devices
[  1127.646] (==) Automatically adding GPU devices
[  1127.646] (==) Automatically binding GPU devices
[  1127.646] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1127.646] (WW) The directory "/usr/share/fonts/misc" does not exist.
[  1127.646] 	Entry deleted from font path.
[  1127.646] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[  1127.646] 	Entry deleted from font path.
[  1127.646] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  1127.646] 	Entry deleted from font path.
[  1127.646] (WW) The directory "/usr/share/fonts/misc" does not exist.
[  1127.646] 	Entry deleted from font path.
[  1127.646] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[  1127.646] 	Entry deleted from font path.
[  1127.646] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  1127.646] 	Entry deleted from font path.
[  1127.646] (**) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[  1127.646] (**) ModulePath set to "/usr/lib/xorg/modules"
[  1127.646] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  1127.646] (WW) Disabling Mouse0
[  1127.646] (WW) Disabling Keyboard0
[  1127.646] (II) Module ABI versions:
[  1127.646] 	X.Org ANSI C Emulation: 0.4
[  1127.646] 	X.Org Video Driver: 25.2
[  1127.646] 	X.Org XInput driver : 24.4
[  1127.646] 	X.Org Server Extension : 10.0
[  1127.647] (--) using VT number 2

[  1127.647] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  1127.648] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1127.648] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[  1127.653] (--) PCI:*(1@0:0:0) 10de:0a3c:103c:1521 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/131072
[  1127.653] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1127.653] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  1127.653] (II) LoadModule: "glx"
[  1127.654] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1127.671] (II) Module glx: vendor="X.Org Foundation"
[  1127.671] 	compiled for 1.21.1.3, module version = 1.0.0
[  1127.671] 	ABI class: X.Org Server Extension, version 10.0
[  1127.671] (II) LoadModule: "nouveau"
[  1127.671] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[  1127.671] (II) Module nouveau: vendor="X.Org Foundation"
[  1127.671] 	compiled for 1.21.1.1, module version = 1.0.17
[  1127.671] 	Module class: X.Org Video Driver
[  1127.671] 	ABI class: X.Org Video Driver, version 25.2
[  1127.671] (II) NOUVEAU driver 
[  1127.671] (II) NOUVEAU driver for NVIDIA chipset families :
[  1127.671] 	RIVA TNT            (NV04)
[  1127.672] 	RIVA TNT2           (NV05)
[  1127.672] 	GeForce 256         (NV10)
[  1127.672] 	GeForce 2           (NV11, NV15)
[  1127.672] 	GeForce 4MX         (NV17, NV18)
[  1127.672] 	GeForce 3           (NV20)
[  1127.672] 	GeForce 4Ti         (NV25, NV28)
[  1127.672] 	GeForce FX          (NV3x)
[  1127.672] 	GeForce 6           (NV4x)
[  1127.672] 	GeForce 7           (G7x)
[  1127.672] 	GeForce 8           (G8x)
[  1127.672] 	GeForce 9           (G9x)
[  1127.672] 	GeForce GTX 2xx/3xx (GT2xx)
[  1127.672] 	GeForce GTX 4xx/5xx (GFxxx)
[  1127.672] 	GeForce GTX 6xx/7xx (GKxxx)
[  1127.672] 	GeForce GTX 9xx     (GMxxx)
[  1127.672] 	GeForce GTX 10xx    (GPxxx)
[  1127.674] (II) [drm] nouveau interface version: 1.3.1
[  1127.675] (II) Loading sub module "dri2"
[  1127.675] (II) LoadModule: "dri2"
[  1127.675] (II) Module "dri2" already built-in
[  1127.675] (--) NOUVEAU(0): Chipset: "NVIDIA NVA5"
[  1127.675] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[  1127.675] (==) NOUVEAU(0): RGB weight 888
[  1127.675] (==) NOUVEAU(0): Default visual is TrueColor
[  1127.675] (==) NOUVEAU(0): Using HW cursor
[  1127.675] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[  1127.675] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[  1127.675] (==) NOUVEAU(0): Page flipping enabled
[  1127.675] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[  1127.675] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[  1127.675] (II) NOUVEAU(0): Initializing outputs ...
[  1127.711] (II) NOUVEAU(0): Output LVDS-1 using monitor section Monitor0
[  1127.785] (II) NOUVEAU(0): Output DP-1 has no monitor section
[  1127.858] (II) NOUVEAU(0): Output DP-2 has no monitor section
[  1127.858] (II) NOUVEAU(0): 3 crtcs needed for screen.
[  1127.859] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[  1127.859] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[  1127.895] (II) NOUVEAU(0): EDID for output LVDS-1
[  1127.895] (II) NOUVEAU(0): Manufacturer: AUO  Model: 13ed  Serial#: 0
[  1127.895] (II) NOUVEAU(0): Year: 2008  Week: 1
[  1127.895] (II) NOUVEAU(0): EDID Version: 1.3
[  1127.895] (II) NOUVEAU(0): Digital Display Input
[  1127.895] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[  1127.895] (II) NOUVEAU(0): Gamma: 2.20
[  1127.895] (II) NOUVEAU(0): No DPMS capabilities specified
[  1127.895] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  1127.895] (II) NOUVEAU(0): First detailed timing is preferred mode
[  1127.895] (II) NOUVEAU(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[  1127.895] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[  1127.895] (II) NOUVEAU(0): Manufacturer's mask: 0
[  1127.895] (II) NOUVEAU(0): Supported detailed timing:
[  1127.895] (II) NOUVEAU(0): clock: 149.8 MHz   Image Size:  344 x 193 mm
[  1127.895] (II) NOUVEAU(0): h_active: 1920  h_sync: 1980  h_sync_end 2028 h_blank_end 2040 h_border: 0
[  1127.895] (II) NOUVEAU(0): v_active: 1080  v_sync: 1092  v_sync_end 1104 v_blanking: 1223 v_border: 0
[  1127.895] (II) NOUVEAU(0): Unknown vendor-specific block f
[  1127.895] (II) NOUVEAU(0):  AUO
[  1127.895] (II) NOUVEAU(0):  B156HW01 V3
[  1127.895] (II) NOUVEAU(0): EDID (in hex):
[  1127.895] (II) NOUVEAU(0): 	00ffffffffffff0006afed1300000000
[  1127.895] (II) NOUVEAU(0): 	01120103802213780ac8959e57549226
[  1127.895] (II) NOUVEAU(0): 	0f505400000001010101010101010101
[  1127.895] (II) NOUVEAU(0): 	010101010101843a807870388f403c30
[  1127.895] (II) NOUVEAU(0): 	cc0058c1100000180000000f00000000
[  1127.895] (II) NOUVEAU(0): 	00000000000000000020000000fe0041
[  1127.895] (II) NOUVEAU(0): 	554f0a202020202020202020000000fe
[  1127.895] (II) NOUVEAU(0): 	004231353648573031205633200a0051
[  1127.895] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[  1127.895] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  149.80  1920 1980 2028 2040  1080 1092 1104 1223 -hsync -vsync (73.4 kHz eP)
[  1127.895] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.36  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[  1127.895] (II) NOUVEAU(0): Modeline "1400x1050"x60.0  121.79  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[  1127.895] (II) NOUVEAU(0): Modeline "1280x1024"x59.9  109.10  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[  1127.895] (II) NOUVEAU(0): Modeline "1280x960"x60.0  101.34  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.8 kHz)
[  1127.895] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.77  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz)
[  1127.895] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.53  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[  1127.895] (II) NOUVEAU(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[  1127.895] (II) NOUVEAU(0): Modeline "640x480"x59.9   23.98  640 664 720 800  480 483 487 500 -hsync +vsync (30.0 kHz)
[  1127.895] (II) NOUVEAU(0): Modeline "720x400"x60.0   22.41  720 744 808 896  400 403 413 417 -hsync +vsync (25.0 kHz)
[  1127.895] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
[  1127.895] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.52  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
[  1127.968] (II) NOUVEAU(0): EDID for output DP-1
[  1128.041] (II) NOUVEAU(0): EDID for output DP-2
[  1128.042] (II) NOUVEAU(0): Output LVDS-1 connected
[  1128.042] (II) NOUVEAU(0): Output DP-1 disconnected
[  1128.042] (II) NOUVEAU(0): Output DP-2 disconnected
[  1128.042] (II) NOUVEAU(0): Using exact sizes for initial modes
[  1128.042] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1920x1080 +0+0
[  1128.042] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[  1128.042] (II) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[  1128.042] (**) NOUVEAU(0):  Driver mode "1920x1080": 149.8 MHz (scaled from 0.0 MHz), 73.4 kHz, 60.0 Hz
[  1128.042] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  149.80  1920 1980 2028 2040  1080 1092 1104 1223 -hsync -vsync (73.4 kHz eP)
[  1128.042] (**) NOUVEAU(0):  Mode "1680x1050": 146.4 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[  1128.042] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.36  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[  1128.042] (**) NOUVEAU(0):  Mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[  1128.042] (II) NOUVEAU(0): Modeline "1400x1050"x60.0  121.79  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[  1128.042] (**) NOUVEAU(0):  Mode "1280x1024": 109.1 MHz (scaled from 0.0 MHz), 63.7 kHz, 59.9 Hz
[  1128.042] (II) NOUVEAU(0): Modeline "1280x1024"x59.9  109.10  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[  1128.042] (**) NOUVEAU(0):  Mode "1280x960": 101.3 MHz (scaled from 0.0 MHz), 59.8 kHz, 60.0 Hz
[  1128.042] (II) NOUVEAU(0): Modeline "1280x960"x60.0  101.34  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.8 kHz)
[  1128.042] (**) NOUVEAU(0):  Mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[  1128.042] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.77  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz)
[  1128.042] (**) NOUVEAU(0):  Mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[  1128.042] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.53  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[  1128.042] (**) NOUVEAU(0):  Mode "800x600": 38.3 MHz (scaled from 0.0 MHz), 37.4 kHz, 60.0 Hz
[  1128.042] (II) NOUVEAU(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[  1128.042] (**) NOUVEAU(0):  Mode "640x480": 24.0 MHz (scaled from 0.0 MHz), 30.0 kHz, 59.9 Hz
[  1128.042] (II) NOUVEAU(0): Modeline "640x480"x59.9   23.98  640 664 720 800  480 483 487 500 -hsync +vsync (30.0 kHz)
[  1128.042] (**) NOUVEAU(0):  Mode "720x400": 22.4 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[  1128.042] (II) NOUVEAU(0): Modeline "720x400"x60.0   22.41  720 744 808 896  400 403 413 417 -hsync +vsync (25.0 kHz)
[  1128.042] (**) NOUVEAU(0):  Mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[  1128.042] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
[  1128.042] (**) NOUVEAU(0):  Mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[  1128.042] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.52  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
[  1128.042] (==) NOUVEAU(0): DPI set to (96, 96)
[  1128.042] (II) Loading sub module "fb"
[  1128.042] (II) LoadModule: "fb"
[  1128.042] (II) Module "fb" already built-in
[  1128.042] (II) Loading sub module "shadowfb"
[  1128.042] (II) LoadModule: "shadowfb"
[  1128.042] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[  1128.043] (II) Module shadowfb: vendor="X.Org Foundation"
[  1128.043] 	compiled for 1.21.1.3, module version = 1.0.0
[  1128.043] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1128.044] (II) NOUVEAU(0): Channel setup complete.
[  1128.045] (II) NOUVEAU(0): [COPY] async initialised.
[  1128.047] (II) NOUVEAU(0): Hardware support for Present enabled
[  1128.048] (II) NOUVEAU(0): [DRI2] Setup complete
[  1128.048] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[  1128.048] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[  1128.048] (II) Loading sub module "exa"
[  1128.048] (II) LoadModule: "exa"
[  1128.048] (II) Loading /usr/lib/xorg/modules/libexa.so
[  1128.049] (II) Module exa: vendor="X.Org Foundation"
[  1128.049] 	compiled for 1.21.1.3, module version = 2.6.0
[  1128.049] 	ABI class: X.Org Video Driver, version 25.2
[  1128.049] (II) EXA(0): Driver allocated offscreen pixmaps
[  1128.049] (II) EXA(0): Driver registered support for the following operations:
[  1128.049] (II)         Solid
[  1128.049] (II)         Copy
[  1128.049] (II)         Composite (RENDER acceleration)
[  1128.049] (II)         UploadToScreen
[  1128.049] (II)         DownloadFromScreen
[  1128.049] (==) NOUVEAU(0): Backing store enabled
[  1128.049] (==) NOUVEAU(0): Silken mouse enabled
[  1128.049] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[  1128.049] (II) NOUVEAU(0): [XvMC] Extension initialized.
[  1128.049] (==) NOUVEAU(0): DPMS enabled
[  1128.051] (II) Initializing extension Generic Event Extension
[  1128.051] (II) Initializing extension SHAPE
[  1128.051] (II) Initializing extension MIT-SHM
[  1128.051] (II) Initializing extension XInputExtension
[  1128.051] (II) Initializing extension XTEST
[  1128.051] (II) Initializing extension BIG-REQUESTS
[  1128.051] (II) Initializing extension SYNC
[  1128.051] (II) Initializing extension XKEYBOARD
[  1128.051] (II) Initializing extension XC-MISC
[  1128.052] (II) Initializing extension SECURITY
[  1128.052] (II) Initializing extension XFIXES
[  1128.052] (II) Initializing extension RENDER
[  1128.052] (II) Initializing extension RANDR
[  1128.052] (II) Initializing extension COMPOSITE
[  1128.052] (II) Initializing extension DAMAGE
[  1128.052] (II) Initializing extension MIT-SCREEN-SAVER
[  1128.052] (II) Initializing extension DOUBLE-BUFFER
[  1128.053] (II) Initializing extension RECORD
[  1128.053] (II) Initializing extension DPMS
[  1128.053] (II) Initializing extension Present
[  1128.053] (II) Initializing extension DRI3
[  1128.053] (II) Initializing extension X-Resource
[  1128.053] (II) Initializing extension XVideo
[  1128.053] (II) Initializing extension XVideo-MotionCompensation
[  1128.053] (II) Initializing extension GLX
[  1128.429] (II) AIGLX: Loaded and initialized nouveau
[  1128.429] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1128.429] (II) Initializing extension XFree86-VidModeExtension
[  1128.429] (II) Initializing extension XFree86-DGA
[  1128.429] (II) Initializing extension XFree86-DRI
[  1128.429] (II) Initializing extension DRI2
[  1128.432] (II) NOUVEAU(0): NVEnterVT is called.
[  1128.433] (EE) NOUVEAU(0): failed to set mode: Invalid argument
[  1129.494] (EE) 
Fatal server error:
[  1129.494] (EE) failed to create screen resources(EE) 
[  1129.494] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  1129.494] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  1129.495] (EE) 
[  1129.495] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1129.495] (II) NOUVEAU(0): NVLeaveVT is called.
[  1129.500] (EE) Server terminated with error (1). Closing log file.

xorg configuration:

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/OTF"
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/100dpi"
	FontPath     "/usr/share/fonts/75dpi"
EndSection

Section "Module"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "WrappedFB"          	# [<bool>]
        #Option     "GLXVBlank"          	# [<bool>]
        #Option     "ZaphodHeads"        	# <str>
        #Option     "PageFlip"           	# [<bool>]
        #Option     "SwapLimit"          	# <i>
        #Option     "AsyncUTSDFS"        	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# <i>
	Identifier  "Card0"
	Driver      "nouveau"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Last edited by luca120 (2022-02-14 14:10:32)

Offline

#4 2022-02-14 14:25:10

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,088

Re: [solved]xorg won't start

Remove the xorg conf and don't replace it with anything, still having issues?

Offline

#5 2022-02-14 15:08:54

luca120
Member
Registered: 2022-02-14
Posts: 14

Re: [solved]xorg won't start

V1del wrote:

Remove the xorg conf and don't replace it with anything, still having issues?

you means remove files:

/root/Xorg....

and

/etc/X11/xorg.conf

both?, if yes, issue still present sad

Luca

Last edited by luca120 (2022-02-14 15:15:13)

Offline

#6 2022-02-14 15:26:44

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,088

Re: [solved]xorg won't start

Repost the log, potentially also try falling back to the modesetting driver by removing xf86-video-nouveau

Offline

#7 2022-02-14 15:34:05

luca120
Member
Registered: 2022-02-14
Posts: 14

Re: [solved]xorg won't start

V1del wrote:

Repost the log, potentially also try falling back to the modesetting driver by removing xf86-video-nouveau

thanks for help me wink

below the log after xf86 removed with command 

Xorg :0 -configure
[    64.703] 
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[    64.703] Current Operating System: Linux 8540w 5.16.8-arch1-1 #1 SMP PREEMPT Tue, 08 Feb 2022 21:21:08 +0000 x86_64
[    64.703] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f1706be0-180f-413f-9f83-8416b77e044b rw loglevel=3 quiet
[    64.703]  
[    64.703] Current version of pixman: 0.40.0
[    64.703] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    64.703] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    64.703] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 14 16:32:11 2022
[    64.703] (II) Module ABI versions:
[    64.703] 	X.Org ANSI C Emulation: 0.4
[    64.703] 	X.Org Video Driver: 25.2
[    64.703] 	X.Org XInput driver : 24.4
[    64.703] 	X.Org Server Extension : 10.0
[    64.705] (--) using VT number 2

[    64.705] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    64.705] (II) xfree86: Adding drm device (/dev/dri/card0)
[    64.705] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    64.709] (--) PCI:*(1@0:0:0) 10de:0a3c:103c:1521 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/131072
[    64.711] List of video drivers:
[    64.711] 	modesetting
[    64.711] 	vesa
[    64.711] (II) LoadModule: "modesetting"
[    64.714] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    64.723] (II) Module modesetting: vendor="X.Org Foundation"
[    64.723] 	compiled for 1.21.1.3, module version = 1.21.1
[    64.723] 	Module class: X.Org Video Driver
[    64.723] 	ABI class: X.Org Video Driver, version 25.2
[    64.723] (II) LoadModule: "vesa"
[    64.724] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    64.724] (II) Module vesa: vendor="X.Org Foundation"
[    64.724] 	compiled for 1.21.1.1, module version = 2.5.0
[    64.724] 	Module class: X.Org Video Driver
[    64.724] 	ABI class: X.Org Video Driver, version 25.2
[    64.725] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    64.725] (II) VESA: driver for VESA chipsets: vesa
[    64.831] (++) Using config file: "/root/xorg.conf.new"
[    64.831] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    64.832] (==) ServerLayout "X.org Configured"
[    64.832] (**) |-->Screen "Screen0" (0)
[    64.832] (**) |   |-->Monitor "Monitor0"
[    64.833] (**) |   |-->Device "Card0"
[    64.833] (**) |-->Input Device "Mouse0"
[    64.833] (**) |-->Input Device "Keyboard0"
[    64.833] (==) Automatically adding devices
[    64.833] (==) Automatically enabling devices
[    64.833] (==) Automatically adding GPU devices
[    64.833] (==) Automatically binding GPU devices
[    64.834] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    64.835] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    64.835] 	Entry deleted from font path.
[    64.837] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    64.837] 	Entry deleted from font path.
[    64.837] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    64.837] 	Entry deleted from font path.
[    64.842] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    64.842] 	Entry deleted from font path.
[    64.842] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    64.842] 	Entry deleted from font path.
[    64.842] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    64.842] 	Entry deleted from font path.
[    64.842] (**) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    64.842] (**) ModulePath set to "/usr/lib/xorg/modules"
[    64.842] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    64.842] (WW) Disabling Mouse0
[    64.842] (WW) Disabling Keyboard0
[    64.842] (**) modeset(0): claimed PCI slot 1@0:0:0
[    64.842] (II) modeset(0): using default device
[    64.842] 
[    64.842] 
Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.
[    64.842] 
Your xorg.conf file is /root/xorg.conf.new

[    64.842] To test the server, run 'X -config /root/xorg.conf.new'

[    64.842] (EE) Server terminated with error (2). Closing log file.

now by looking better  if I run the command 

X -config /root/xorg.conf.new

I don't have only black screen but I have a little rettangle in the left corner on the top of the display

Last edited by luca120 (2022-02-14 15:39:03)

Offline

#8 2022-02-14 15:55:37

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,088

Re: [solved]xorg won't start

Stop running that, there's no need for a xorg config to exist and it's most often more detrimental than helpful if you just run that to have run that.

Offline

#9 2022-02-14 16:04:06

luca120
Member
Registered: 2022-02-14
Posts: 14

Re: [solved]xorg won't start

V1del wrote:

Stop running that, there's no need for a xorg config to exist and it's most often more detrimental than helpful if you just run that to have run that.

ok.

delated ALL files and conf, now i'm running linux without nouveau and nvidia drivers

Luca

Last edited by luca120 (2022-02-14 16:07:00)

Offline

#10 2022-02-14 16:06:20

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,088

Re: [solved]xorg won't start

Updated log from trying to startx now? Or does it work? Also general disclaimer, do not run startx or other means of starting Xorg as your root user. While you likely don't have much set up yet this will eventually bite you so just avoid it outright.

Offline

#11 2022-02-14 16:08:29

luca120
Member
Registered: 2022-02-14
Posts: 14

Re: [solved]xorg won't start

V1del wrote:

Updated log from trying to startx now? Or does it work? Also general disclaimer, do not run startx or other means of starting Xorg as your root user. While you likely don't have much set up yet this will eventually bite you so just avoid it outright.

yes, I see 3 white terminals and mouse, which log you need?

Luca Roscio

Last edited by luca120 (2022-02-14 16:10:21)

Offline

#12 2022-02-14 16:23:02

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,088

Re: [solved]xorg won't start

Then xorg works and you can mark this thread as [SOLVED] by editing the title in your first post, can you start/enable SDDM as well now?

Last edited by V1del (2022-02-14 16:23:34)

Offline

#13 2022-02-14 16:35:15

luca120
Member
Registered: 2022-02-14
Posts: 14

Re: [solved]xorg won't start

V1del wrote:

Then xorg works and you can mark this thread as [SOLVED] by editing the title in your first post, can you start/enable SDDM as well now?


can you start/enable SDDM as well now? --> no if i try to run sddm with command 

systemctl start sddm

, display will become black with white rettangle on the corner of the top of the left.

xorg start, yes but without any kind of drivers that means I cannot have a gui interface with this distro?

Luca

Last edited by luca120 (2022-02-14 16:36:20)

Offline

#14 2022-02-14 16:41:58

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,088

Re: [solved]xorg won't start

modesetting is not "no driver". Your card should generally work correctly and the nouveau parts are part of the kernel.

After such an SDDM run what's an updated Xorg log  and 

systemctl status sddm

?

If you do think that this is a nouveau bug, which is quite possible, and you'd want to set up the nvidia drivers you'd need to install nvidia-340xx-dkms and the relevant {lib32-,}nvidia-340xx-utils variants as well as the kernel headers from the linux-headers package (and for general compat reasons you'll probably want to stick to the LTS kernel to have a stable API to compile against)

Last edited by V1del (2022-02-14 16:46:11)

Offline

#15 2022-02-14 16:58:23

luca120
Member
Registered: 2022-02-14
Posts: 14

Re: [solved]xorg won't start

V1del wrote:

modesetting is not "no driver". Your card should generally work correctly and the nouveau parts are part of the kernel.

After such an SDDM run what's an updated Xorg log  and 

systemctl status sddm

?

If you do think that this is a nouveau bug, which is quite possible, and you'd want to set up the nvidia drivers you'd need to install nvidia-340xx-dkms and the relevant {lib32-,}nvidia-340xx-utils variants as well as the kernel headers from the linux-headers package (and for general compat reasons you'll probably want to stick to the LTS kernel to have a stable API to compile against)




After such an SDDM run what's an updated Xorg log  and 

systemctl status sddm

? --> sddm will result active after all steps below:

1 - run systemctl start sddm
     ---> here display will show a white rectangle as wrote before
2- ctrl + alt + f2
3 - preforme the login with console
4  run Systemctl status sddm
  ---> now result active


as as you can image issue  related to the black screen still present ( that becase is missing all nvidia / nouveau driver, i think)

normally correctly me if i write somthing wrong, if I try to install nvidia driver SHOULD be visible also the gui screen right? or I have to modify something alse?


Luca

Last edited by luca120 (2022-02-14 16:59:45)

Offline

#16 2022-02-14 17:07:43

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,088

Re: [solved]xorg won't start

Please post these outputs, refer to my link from earlier on how to paste logs without a GUI.

There's no inherent guarantee the GUI will work with the nvidia driver, one of the main problems is that technically nvidia-340xx is basically end of support, it's technically already incompatible with the current xorg-server version. It's currently running on the hopes that no important ABI changed by telling the server to ignore the  incompatibility. To get yourself out of that compatibility issue you'd also need to downgrade xorg to a 1.20 variant. However since no one seems to complain too much I'm assuming that is still working for now. In any case getting it to work properly mandates you install these packages properly so you will need linux-headers, nvidia-340xx-dkms and nvidia-340xx-utils at the very least.

Here as well, do not generate a config.

Offline

Pages: 1

Board footer

Powered by FluxBB