You are not logged in.
- Topics: Active | Unanswered
#1 2022-02-16 05:02:44
- CaeriTech
- Member
- Registered: 2021-07-12
- Posts: 31
No sound in new install using pipewire
I created a new install using the below pipewire packages however even though the volume meters for the Built-in Audio Pro config shows activity there is no sound coming from the speakers. If I record while I'm streaming from Firefox the mp3 file only contains silence when played on another system without pipewire.
The Built-in Audio Pro is the only pavucontrol config that show volume meter activity.
How do I configure pipewire to send sound to my speakers and record audio streams?
pipewire 1:0.3.45-1
pipewire-alsa 1:0.3.45-1
pipewire-pulse 1:0.3.45-1
wireplumber 0.4.8-1-=[ LIVE enabled UEFI with redundant syslinux pure systemd detached LUKS header partitionless encrypted GPT SSDx3 RAID0 wayland only because I can. ]=-
Backward compatibility is for the masses. There's no dual-boot here.
[CaeriTech remains only artificially intelligent. Turing would be aghast at just how artificial.]
Offline
#2 2022-02-16 10:29:42
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,944
Re: No sound in new install using pipewire
Generally don't use a pro profile to test basic functionality, but there's generally a lot of lacking info here.
Post
sudo fuser -v /dev/snd/*
sudo dmesg | grep -iE 'snd|sof'
aplay -lL #alsa-utils
pactl list cards
pactl list sinks
pactl list sink-inputsduring an active playback attempt
Offline
#3 2022-02-16 13:38:34
- CaeriTech
- Member
- Registered: 2021-07-12
- Posts: 31
Re: No sound in new install using pipewire
As requested...
sudo fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: caeri 28202 F.... wireplumber
/dev/snd/controlC1: caeri 28202 F.... wireplumber
/dev/snd/pcmC0D0c: caeri 28200 F...m pipewire
/dev/snd/pcmC0D0p: caeri 28200 F...m pipewire
/dev/snd/pcmC0D1p: caeri 28200 F...m pipewire
/dev/snd/pcmC0D2c: caeri 28200 F...m pipewire
/dev/snd/seq: caeri 28200 F.... pipewiresudo dmesg | grep -iE 'snd|sof'
[ 0.307741] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.439853] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.439854] software IO TLB: mapped [mem 0x00000000b4200000-0x00000000b8200000] (64MB)
[ 48.873021] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 48.873034] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 49.001684] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[ 49.258749] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 49.258756] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 49.258758] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 49.258760] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 49.258761] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 49.258762] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 49.258763] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 49.258764] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 49.258766] snd_hda_codec_realtek hdaudioC0D0: Line=0x1aaplay -lL
null
Discard all samples (playback) or generate zero samples (capture)
pipewire
PipeWire Sound Server
default
Default ALSA Output (currently PipeWire Media Server)
sysdefault:CARD=SB
HDA ATI SB, ALC892 Analog
Default Audio Device
front:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
Front output / input
surround21:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=SB,DEV=0
HDA ATI SB, ALC892 Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 1
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 2
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 3
HDMI Audio Output
hdmi:CARD=NVidia,DEV=4
HDA NVidia, HDMI 4
HDMI Audio Output
hdmi:CARD=NVidia,DEV=5
HDA NVidia, HDMI 5
HDMI Audio Output
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 11: HDMI 5 [HDMI 5]
Subdevices: 1/1
Subdevice #0: subdevice #0pactl list cards
Card #44
Name: alsa_card.pci-0000_01_00.1
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.card.longname = "HDA NVidia at 0xfe080000 irq 43"
api.alsa.card.name = "HDA NVidia"
api.alsa.path = "hw:1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:01:00.1"
device.description = "GM107 High Definition Audio Controller [GeForce 940MX]"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_01_00.1"
device.nick = "HDA NVidia"
device.plugged.usec = "53029335"
device.product.id = "4028"
device.product.name = "GM107 High Definition Audio Controller [GeForce 940MX]"
device.subsystem = "sound"
device.sysfs.path = "/sys/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
device.vendor.id = "4318"
device.vendor.name = "NVIDIA Corporation"
media.class = "Audio/Device"
factory.id = "14"
client.id = "38"
object.id = "46"
object.serial = "44"
object.path = "alsa:pcm:1"
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xfe080000 irq 43"
alsa.driver_name = "snd_hda_intel"
device.string = "1"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra5: Digital Surround 5.1 (HDMI 6) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra5: Digital Surround 7.1 (HDMI 6) Output (sinks: 1, sources: 0, priority: 600, available: no)
pro-audio: Pro Audio (sinks: 6, sources: 0, priority: 1, available: yes)
Active Profile: off
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 1"
device.icon_name = "video-display"
card.profile.port = "0"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 2"
device.icon_name = "video-display"
card.profile.port = "1"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 3"
device.icon_name = "video-display"
card.profile.port = "2"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
card.profile.port = "3"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
hdmi-output-4: HDMI / DisplayPort 5 (type: HDMI, priority: 5500, latency offset: 0 usec, availability group: Legacy 5, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 5"
device.icon_name = "video-display"
card.profile.port = "4"
Part of profile(s): output:hdmi-stereo-extra4, output:hdmi-surround-extra4, output:hdmi-surround71-extra4
hdmi-output-5: HDMI / DisplayPort 6 (type: HDMI, priority: 5400, latency offset: 0 usec, availability group: Legacy 6, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 6"
device.icon_name = "video-display"
card.profile.port = "5"
Part of profile(s): output:hdmi-stereo-extra5, output:hdmi-surround-extra5, output:hdmi-surround71-extra5
Card #45
Name: alsa_card.pci-0000_00_14.2
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.card.longname = "HDA ATI SB at 0xfe700000 irq 16"
api.alsa.card.name = "HDA ATI SB"
api.alsa.path = "hw:0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:00:14.2"
device.description = "Built-in Audio"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_14.2"
device.nick = "HDA ATI SB"
device.plugged.usec = "53077812"
device.product.id = "17283"
device.product.name = "SBx00 Azalia (Intel HDA) (M4A89GTD PRO/USB3 Motherboard)"
device.subsystem = "sound"
device.sysfs.path = "/sys/devices/pci0000:00/0000:00:14.2/sound/card0"
device.vendor.id = "4098"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
media.class = "Audio/Device"
factory.id = "14"
client.id = "38"
object.id = "47"
object.serial = "45"
object.path = "alsa:pcm:0"
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xfe700000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.string = "0"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: no)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
output:analog-surround-71: Analog Surround 7.1 Output (sinks: 1, sources: 0, priority: 1200, available: no)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
Active Profile: pro-audio
Ports:
analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 1"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo
analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 2"
device.icon_name = "audio-input-microphone"
card.profile.port = "1"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo
analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 3"
card.profile.port = "2"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo
analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 4"
card.profile.port = "3"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo, output:analog-surround-71, output:analog-surround-71+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, not available)
Properties:
port.type = "headphones"
port.availability-group = "Legacy 5"
device.icon_name = "audio-headphones"
card.profile.port = "4"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
card.profile.port = "5"
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereopactl list sinks
Sink #46
State: RUNNING
Name: alsa_output.pci-0000_00_14.2.pro-output-0
Description: Built-in Audio Pro
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: no
Volume: aux0: 63506 / 97% / -0.82 dB, aux1: 63506 / 97% / -0.82 dB, aux2: 65536 / 100% / 0.00 dB, aux3: 65536 / 100% / 0.00 dB, aux4: 65536 / 100% / 0.00 dB, aux5: 65536 / 100% / 0.00 dB, aux6: 65536 / 100% / 0.00 dB, aux7: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_14.2.pro-output-0.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.class = "generic"
alsa.device = "0"
alsa.driver_name = "snd_hda_intel"
alsa.id = "ALC892 Analog"
alsa.long_card_name = "HDA ATI SB at 0xfe700000 irq 16"
alsa.name = "ALC892 Analog"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA ATI SB at 0xfe700000 irq 16"
api.alsa.card.name = "HDA ATI SB"
api.alsa.path = "hw:0,0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "1"
device.api = "alsa"
device.class = "sound"
device.id = "47"
device.profile.description = "Pro"
device.profile.name = "pro-output-0"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Built-in Audio Pro"
node.name = "alsa_output.pci-0000_00_14.2.pro-output-0"
node.nick = "HDA ATI SB"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:hw:0,0:playback"
priority.driver = "1000"
priority.session = "1000"
factory.id = "18"
client.id = "38"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "48"
object.serial = "46"
node.max-latency = "16384/48000"
Formats:
pcm
Sink #47
State: IDLE
Name: alsa_output.pci-0000_00_14.2.pro-output-1
Description: Built-in Audio Pro 1
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: aux0,aux1
Owner Module: 4294967295
Mute: no
Volume: aux0: 65536 / 100% / 0.00 dB, aux1: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_14.2.pro-output-1.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.class = "generic"
alsa.device = "1"
alsa.driver_name = "snd_hda_intel"
alsa.id = "ALC892 Digital"
alsa.long_card_name = "HDA ATI SB at 0xfe700000 irq 16"
alsa.name = "ALC892 Digital"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA ATI SB at 0xfe700000 irq 16"
api.alsa.card.name = "HDA ATI SB"
api.alsa.path = "hw:0,1"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "AUX0,AUX1"
card.profile.device = "2"
device.api = "alsa"
device.class = "sound"
device.id = "47"
device.profile.description = "Pro 1"
device.profile.name = "pro-output-1"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Built-in Audio Pro 1"
node.name = "alsa_output.pci-0000_00_14.2.pro-output-1"
node.nick = "HDA ATI SB"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:hw:0,1:playback"
priority.driver = "728"
priority.session = "728"
factory.id = "18"
client.id = "38"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "49"
object.serial = "47"
node.max-latency = "16384/48000"
Formats:
pcmpactl list sink-inputs :
Sink Input #189
Driver: PipeWire
Owner Module: n/a
Client: 176
Sink: 46
Sample Specification: float32le 2ch 44100Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 59543 / 91% / -2.50 dB, front-right: 59543 / 91% / -2.50 dB
balance 0.00
Buffer Latency: 0 usec
Sink Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Firefox"
application.process.id = "38458"
application.process.user = "caeri"
application.process.host = "TESTING"
application.process.binary = "firefox"
application.language = "en_CA.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "02b9a8e3dccb4c39bd82d9ef7d80328e"
application.process.session_id = "4"
media.name = "Radio Caprice - Progressive Psytrance | Live & for free"
node.rate = "1/44100"
stream.is-live = "true"
node.name = "Firefox"
node.autoconnect = "true"
media.class = "Stream/Output/Audio"
adapt.follower.node = ""
object.register = "false"
factory.id = "6"
audio.adapt.follower = ""
factory.mode = "split"
library.name = "audioconvert/libspa-audioconvert"
clock.quantum-limit = "8192"
client.id = "107"
object.id = "99"
object.serial = "189"
node.latency = "3307/44100"
pulse.attr.maxlength = "4194304"
pulse.attr.tlength = "44104"
pulse.attr.prebuf = "35296"
pulse.attr.minreq = "8816"
module-stream-restore.id = "sink-input-by-application-name:Firefox"-=[ LIVE enabled UEFI with redundant syslinux pure systemd detached LUKS header partitionless encrypted GPT SSDx3 RAID0 wayland only because I can. ]=-
Backward compatibility is for the masses. There's no dual-boot here.
[CaeriTech remains only artificially intelligent. Turing would be aghast at just how artificial.]
Offline
#4 2022-02-17 12:59:57
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,944
Re: No sound in new install using pipewire
Your firefox is not playing to the analog audio card but to the digital device
pactl move-sink-input 189 47double check these numbers they can change between playback restart etc or actually look at the firefox stream in pavucontrol and move it to the correct card.
Bit weird that it doesn't consider any of the other profiles to be available which is likely the main cause for this, check whether you can force it to a standard profile
pactl set-card-profile alsa_card.pci-0000_00_14.2 output:analog-stereo+input:analog-stereoOffline