You are not logged in.

Pages: 1

#1 2022-02-07 15:06:25

John Path
Member
Registered: 2021-10-15
Posts: 57

BSPWM restart on its own

Hi guys,

I have a small problem, sometimes when  i press my volume button (fn key and {f2, f3}) bspwm restart automatically.
It happens sometime like 2 out of 10, but it is super annoying when it happens.

So i could really use some help from you guys.
Thanks everyone for hearing me out.

Offline

#2 2022-02-07 16:53:59

ishaanbhimwal
Member
Registered: 2022-01-21
Posts: 48
Website

Re: BSPWM restart on its own

I have a similar issue on my manjaro kde system. This happens extremely rarely and I have not been able to solve it yet. Switching to LTS kernel does help a little bit though. Next time this happens, just login into your system and share output of "sudo dmesg". Similar issue.

Offline

#3 2022-02-07 22:17:46

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,261

Re: BSPWM restart on its own

Check the old xorg log for a backtrace that ends somewhere in XkbHandleActions, https://bbs.archlinux.org/viewtopic.php?id=271450

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#4 2022-02-19 10:36:17

John Path
Member
Registered: 2021-10-15
Posts: 57

Re: BSPWM restart on its own

seth wrote:

Check the old xorg log for a backtrace that ends somewhere in XkbHandleActions,

Sorry friends i didnot had the problem since then,

But a few minute ago it just happened but i cannot find any thing that ends with XkkbHandleActions

I checked both files Xorg.1.log and Xorg.1.log.old from .local/share/xorg

Offline

#5 2022-02-19 10:37:49

John Path
Member
Registered: 2021-10-15
Posts: 57

Re: BSPWM restart on its own

ishaanbhimwal wrote:

share output of "sudo dmesg".

That gave me a whole bunch of output am i supposed to share all the outputs?

Offline

#6 2022-02-19 12:28:55

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,261

Re: BSPWM restart on its own

It would probably be wise to share the xorg logs as well as the complete system journal for the boot ("sudo journalctl -b" for the current one) - you can use the tip in the 1st link below to feed them into a pastebin service.
And yes: all the outputs.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#7 2022-04-07 11:15:00

John Path
Member
Registered: 2021-10-15
Posts: 57

Re: BSPWM restart on its own

Sorry i wasn't facing the problem so i couldnot post the xorg files as it was replaced with new ones.

But just now i faced the probblem and i think this one is the log file it was named as Xorg.0.log.old and it show the times around which i opened my laptop

[     2.782] (--) Log file renamed from "/var/log/Xorg.pid-565.log" to "/var/log/Xorg.0.log"
[     2.784] 
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[     2.784] Current Operating System: Linux Bhaskar 5.17.1-arch1-1 #1 SMP PREEMPT Mon, 28 Mar 2022 20:55:33 +0000 x86_64
[     2.784] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=eac84b5b-12e8-4052-9d2c-075c37ad3051 rw loglevel=3 intel_pstate=disable
[     2.784]  
[     2.784] Current version of pixman: 0.40.0
[     2.784] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     2.784] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     2.784] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr  7 15:46:38 2022
[     2.788] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     2.788] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     2.790] (==) ServerLayout "layout"
[     2.790] (**) |-->Screen "integrated" (0)
[     2.790] (**) |   |-->Monitor "<default monitor>"
[     2.791] (**) |   |-->Device "integrated"
[     2.791] (**) |   |-->GPUDevice "Device0"
[     2.791] (**) |   |-->GPUDevice "nvidia"
[     2.791] (==) No monitor specified for screen "integrated".
	Using a default monitor configuration.
[     2.791] (**) |-->Inactive Device "nvidia"
[     2.791] (==) Automatically adding devices
[     2.791] (==) Automatically enabling devices
[     2.791] (==) Automatically adding GPU devices
[     2.791] (==) Automatically binding GPU devices
[     2.791] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     2.791] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     2.791] 	Entry deleted from font path.
[     2.793] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     2.793] 	Entry deleted from font path.
[     2.793] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     2.793] 	Entry deleted from font path.
[     2.793] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     2.793] 	Entry deleted from font path.
[     2.793] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     2.793] 	Entry deleted from font path.
[     2.793] (==) FontPath set to:
	/usr/share/fonts/TTF
[     2.793] (**) ModulePath set to "/usr/lib/nvidia,/usr/lib32/nvidia,/usr/lib32/nvidia/xorg/modules,/usr/lib32/xorg/modules,/usr/lib64/nvidia/xorg/modules,/usr/lib64/nvidia/xorg,/usr/lib64/xorg/modules"
[     2.793] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     2.793] (II) Module ABI versions:
[     2.793] 	X.Org ANSI C Emulation: 0.4
[     2.793] 	X.Org Video Driver: 25.2
[     2.793] 	X.Org XInput driver : 24.4
[     2.793] 	X.Org Server Extension : 10.0
[     2.793] (++) using VT number 1

[     2.793] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     2.794] (II) xfree86: Adding drm device (/dev/dri/card0)
[     2.794] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     2.801] (--) PCI:*(0@0:2:0) 8086:9bc4:17aa:3fa2 rev 5, Mem @ 0xc3000000/16777216, 0xa0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[     2.801] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     2.801] (II) LoadModule: "glx"
[     2.809] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[     2.814] (II) Module glx: vendor="X.Org Foundation"
[     2.814] 	compiled for 1.21.1.3, module version = 1.0.0
[     2.814] 	ABI class: X.Org Server Extension, version 10.0
[     2.814] (II) LoadModule: "intel"
[     2.815] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[     2.817] (II) Module intel: vendor="X.Org Foundation"
[     2.817] 	compiled for 1.21.1.1, module version = 2.99.917
[     2.817] 	Module class: X.Org Video Driver
[     2.817] 	ABI class: X.Org Video Driver, version 25.2
[     2.817] (II) LoadModule: "nvidia"
[     2.817] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[     2.820] (II) Module nvidia: vendor="NVIDIA Corporation"
[     2.820] 	compiled for 1.6.99.901, module version = 1.0.0
[     2.820] 	Module class: X.Org Video Driver
[     2.821] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     2.821] (II) intel: Driver for Intel(R) HD Graphics
[     2.821] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     2.821] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     2.821] (II) NVIDIA dlloader X Driver  510.60.02  Wed Mar 16 11:23:40 UTC 2022
[     2.821] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     2.821] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[     2.821] (II) intel(0): SNA compiled from 2.99.917-916-g31486f40
[     2.822] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[     2.822] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[     2.822] (II) intel(0): Creating default Display subsection in Screen section
	"integrated" for depth/fbbpp 24/32
[     2.822] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     2.822] (==) intel(0): RGB weight 888
[     2.822] (==) intel(0): Default visual is TrueColor
[     2.822] (**) intel(0): Option "DRI" "3"
[     2.823] (II) intel(0): Output eDP1 has no monitor section
[     2.823] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     2.823] (II) intel(0): Enabled output eDP1
[     2.823] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     2.823] (II) intel(0): Output VIRTUAL1 has no monitor section
[     2.823] (II) intel(0): Enabled output VIRTUAL1
[     2.823] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[     2.823] (==) intel(0): TearFree enabled
[     2.823] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     2.823] (==) intel(0): DPI set to (96, 96)
[     2.823] (II) Loading sub module "dri3"
[     2.823] (II) LoadModule: "dri3"
[     2.823] (II) Module "dri3" already built-in
[     2.823] (II) Loading sub module "dri2"
[     2.823] (II) LoadModule: "dri2"
[     2.823] (II) Module "dri2" already built-in
[     2.823] (II) Loading sub module "present"
[     2.823] (II) LoadModule: "present"
[     2.823] (II) Module "present" already built-in
[     2.823] (II) UnloadModule: "nvidia"
[     2.823] (II) Unloading nvidia
[     2.825] (II) intel(0): SNA initialized with Coffeelake (gen9) backend
[     2.825] (==) intel(0): Backing store enabled
[     2.825] (==) intel(0): Silken mouse enabled
[     2.825] (II) intel(0): HW Cursor enabled
[     2.826] (==) intel(0): DPMS enabled
[     2.826] (==) intel(0): Display hotplug detection enabled
[     2.826] (II) intel(0): [DRI2] Setup complete
[     2.826] (II) intel(0): [DRI2]   DRI driver: i965
[     2.826] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     2.826] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[     2.826] (II) intel(0): hardware support for Present enabled
[     2.826] (II) Initializing extension Generic Event Extension
[     2.827] (II) Initializing extension SHAPE
[     2.827] (II) Initializing extension MIT-SHM
[     2.827] (II) Initializing extension XInputExtension
[     2.827] (II) Initializing extension XTEST
[     2.827] (II) Initializing extension BIG-REQUESTS
[     2.827] (II) Initializing extension SYNC
[     2.828] (II) Initializing extension XKEYBOARD
[     2.828] (II) Initializing extension XC-MISC
[     2.828] (II) Initializing extension SECURITY
[     2.828] (II) Initializing extension XFIXES
[     2.828] (II) Initializing extension RENDER
[     2.828] (II) Initializing extension RANDR
[     2.828] (II) Initializing extension COMPOSITE
[     2.828] (II) Initializing extension DAMAGE
[     2.828] (II) Initializing extension MIT-SCREEN-SAVER
[     2.828] (II) Initializing extension DOUBLE-BUFFER
[     2.829] (II) Initializing extension RECORD
[     2.829] (II) Initializing extension DPMS
[     2.829] (II) Initializing extension Present
[     2.829] (II) Initializing extension DRI3
[     2.829] (II) Initializing extension X-Resource
[     2.829] (II) Initializing extension XVideo
[     2.829] (II) Initializing extension XVideo-MotionCompensation
[     2.829] (II) Initializing extension GLX
[     2.829] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[     2.829] (EE) AIGLX error: unable to load driver i965
[     2.986] (II) IGLX: Loaded and initialized swrast
[     2.986] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     2.986] (II) Initializing extension XFree86-VidModeExtension
[     2.986] (II) Initializing extension XFree86-DGA
[     2.986] (II) Initializing extension XFree86-DRI
[     2.986] (II) Initializing extension DRI2
[     2.989] (II) intel(0): switch to mode 1920x1080@120.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     2.990] (II) intel(0): Setting screen physical size to 508 x 285
[     3.022] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[     3.022] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     3.022] (**) Video Bus: Applying InputClass "system-keyboard"
[     3.022] (II) LoadModule: "libinput"
[     3.022] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[     3.024] (II) Module libinput: vendor="X.Org Foundation"
[     3.024] 	compiled for 1.21.1.3, module version = 1.2.1
[     3.024] 	Module class: X.Org XInput Driver
[     3.024] 	ABI class: X.Org XInput driver, version 24.4
[     3.024] (II) Using input driver 'libinput' for 'Video Bus'
[     3.024] (**) Video Bus: always reports core events
[     3.024] (**) Option "Device" "/dev/input/event4"
[     3.030] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[     3.030] (II) event4  - Video Bus: device is a keyboard
[     3.030] (II) event4  - Video Bus: device removed
[     3.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[     3.126] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[     3.126] (**) Option "xkb_model" "pc104"
[     3.126] (**) Option "xkb_layout" "us"
[     3.126] (**) Option "xkb_variant" "dvorak"
[     3.126] (**) Option "xkb_options" "caps:swapescape"
[     3.146] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[     3.146] (II) event4  - Video Bus: device is a keyboard
[     3.146] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     3.146] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     3.146] (**) Power Button: Applying InputClass "system-keyboard"
[     3.146] (II) Using input driver 'libinput' for 'Power Button'
[     3.146] (**) Power Button: always reports core events
[     3.146] (**) Option "Device" "/dev/input/event1"
[     3.147] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     3.147] (II) event1  - Power Button: device is a keyboard
[     3.147] (II) event1  - Power Button: device removed
[     3.173] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     3.173] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     3.173] (**) Option "xkb_model" "pc104"
[     3.173] (**) Option "xkb_layout" "us"
[     3.173] (**) Option "xkb_variant" "dvorak"
[     3.173] (**) Option "xkb_options" "caps:swapescape"
[     3.174] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     3.174] (II) event1  - Power Button: device is a keyboard
[     3.174] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     3.174] (II) No input driver specified, ignoring this device.
[     3.174] (II) This device may have been added with another device file.
[     3.175] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event8)
[     3.175] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[     3.175] (**) Integrated Camera: Integrated C: Applying InputClass "system-keyboard"
[     3.175] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[     3.175] (**) Integrated Camera: Integrated C: always reports core events
[     3.175] (**) Option "Device" "/dev/input/event8"
[     3.176] (II) event8  - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[     3.176] (II) event8  - Integrated Camera: Integrated C: device is a keyboard
[     3.176] (II) event8  - Integrated Camera: Integrated C: device removed
[     3.223] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input9/event8"
[     3.223] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 8)
[     3.223] (**) Option "xkb_model" "pc104"
[     3.223] (**) Option "xkb_layout" "us"
[     3.223] (**) Option "xkb_variant" "dvorak"
[     3.223] (**) Option "xkb_options" "caps:swapescape"
[     3.224] (II) event8  - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[     3.224] (II) event8  - Integrated Camera: Integrated C: device is a keyboard
[     3.225] (II) config/udev: Adding input device MSFT0001:01 06CB:CE2D Mouse (/dev/input/event6)
[     3.225] (**) MSFT0001:01 06CB:CE2D Mouse: Applying InputClass "libinput pointer catchall"
[     3.225] (II) Using input driver 'libinput' for 'MSFT0001:01 06CB:CE2D Mouse'
[     3.225] (**) MSFT0001:01 06CB:CE2D Mouse: always reports core events
[     3.225] (**) Option "Device" "/dev/input/event6"
[     3.226] (II) event6  - MSFT0001:01 06CB:CE2D Mouse: is tagged by udev as: Mouse Pointingstick
[     3.226] (II) event6  - MSFT0001:01 06CB:CE2D Mouse: device is a pointer
[     3.226] (II) event6  - MSFT0001:01 06CB:CE2D Mouse: device removed
[     3.276] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-MSFT0001:01/0018:06CB:CE2D.0001/input/input10/event6"
[     3.276] (II) XINPUT: Adding extended input device "MSFT0001:01 06CB:CE2D Mouse" (type: MOUSE, id 9)
[     3.276] (**) Option "AccelerationScheme" "none"
[     3.276] (**) MSFT0001:01 06CB:CE2D Mouse: (accel) selected scheme none/0
[     3.276] (**) MSFT0001:01 06CB:CE2D Mouse: (accel) acceleration factor: 2.000
[     3.276] (**) MSFT0001:01 06CB:CE2D Mouse: (accel) acceleration threshold: 4
[     3.277] (II) event6  - MSFT0001:01 06CB:CE2D Mouse: is tagged by udev as: Mouse Pointingstick
[     3.278] (II) event6  - MSFT0001:01 06CB:CE2D Mouse: device is a pointer
[     3.279] (II) config/udev: Adding input device MSFT0001:01 06CB:CE2D Mouse (/dev/input/mouse0)
[     3.279] (II) No input driver specified, ignoring this device.
[     3.279] (II) This device may have been added with another device file.
[     3.279] (II) config/udev: Adding input device MSFT0001:01 06CB:CE2D Touchpad (/dev/input/event7)
[     3.279] (**) MSFT0001:01 06CB:CE2D Touchpad: Applying InputClass "libinput touchpad catchall"
[     3.279] (**) MSFT0001:01 06CB:CE2D Touchpad: Applying InputClass "libinput touchpad catchall"
[     3.279] (II) Using input driver 'libinput' for 'MSFT0001:01 06CB:CE2D Touchpad'
[     3.279] (**) MSFT0001:01 06CB:CE2D Touchpad: always reports core events
[     3.279] (**) Option "Device" "/dev/input/event7"
[     3.280] (II) event7  - MSFT0001:01 06CB:CE2D Touchpad: is tagged by udev as: Touchpad
[     3.281] (II) event7  - MSFT0001:01 06CB:CE2D Touchpad: device is a touchpad
[     3.281] (II) event7  - MSFT0001:01 06CB:CE2D Touchpad: device removed
[     3.319] (**) Option "Tapping" "on"
[     3.320] (**) Option "NaturalScrolling" "on"
[     3.320] (**) Option "MiddleEmulation" "on"
[     3.320] (**) Option "DisableWhileTyping" "on"
[     3.320] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-MSFT0001:01/0018:06CB:CE2D.0001/input/input11/event7"
[     3.320] (II) XINPUT: Adding extended input device "MSFT0001:01 06CB:CE2D Touchpad" (type: TOUCHPAD, id 10)
[     3.321] (**) Option "AccelerationScheme" "none"
[     3.321] (**) MSFT0001:01 06CB:CE2D Touchpad: (accel) selected scheme none/0
[     3.321] (**) MSFT0001:01 06CB:CE2D Touchpad: (accel) acceleration factor: 2.000
[     3.321] (**) MSFT0001:01 06CB:CE2D Touchpad: (accel) acceleration threshold: 4
[     3.322] (II) event7  - MSFT0001:01 06CB:CE2D Touchpad: is tagged by udev as: Touchpad
[     3.324] (II) event7  - MSFT0001:01 06CB:CE2D Touchpad: device is a touchpad
[     3.324] (II) config/udev: Adding input device MSFT0001:01 06CB:CE2D Touchpad (/dev/input/mouse1)
[     3.324] (II) No input driver specified, ignoring this device.
[     3.324] (II) This device may have been added with another device file.
[     3.325] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event3)
[     3.325] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[     3.325] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[     3.325] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[     3.325] (**) Ideapad extra buttons: always reports core events
[     3.325] (**) Option "Device" "/dev/input/event3"
[     3.326] (II) event3  - Ideapad extra buttons: is tagged by udev as: Keyboard
[     3.326] (II) event3  - Ideapad extra buttons: device is a keyboard
[     3.326] (II) event3  - Ideapad extra buttons: device removed
[     3.380] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input3/event3"
[     3.380] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 11)
[     3.380] (**) Option "xkb_model" "pc104"
[     3.380] (**) Option "xkb_layout" "us"
[     3.380] (**) Option "xkb_variant" "dvorak"
[     3.380] (**) Option "xkb_options" "caps:swapescape"
[     3.380] (II) event3  - Ideapad extra buttons: is tagged by udev as: Keyboard
[     3.381] (II) event3  - Ideapad extra buttons: device is a keyboard
[     3.381] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[     3.381] (II) No input driver specified, ignoring this device.
[     3.381] (II) This device may have been added with another device file.
[     3.381] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[     3.381] (II) No input driver specified, ignoring this device.
[     3.381] (II) This device may have been added with another device file.
[     3.382] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[     3.382] (II) No input driver specified, ignoring this device.
[     3.382] (II) This device may have been added with another device file.
[     3.382] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[     3.382] (II) No input driver specified, ignoring this device.
[     3.382] (II) This device may have been added with another device file.
[     3.382] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[     3.382] (II) No input driver specified, ignoring this device.
[     3.382] (II) This device may have been added with another device file.
[     3.383] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event14)
[     3.383] (II) No input driver specified, ignoring this device.
[     3.383] (II) This device may have been added with another device file.
[     3.383] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event15)
[     3.383] (II) No input driver specified, ignoring this device.
[     3.383] (II) This device may have been added with another device file.
[     3.384] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[     3.384] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     3.384] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     3.384] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     3.384] (**) AT Translated Set 2 keyboard: always reports core events
[     3.384] (**) Option "Device" "/dev/input/event2"
[     3.384] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     3.385] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[     3.385] (II) event2  - AT Translated Set 2 keyboard: device removed
[     3.413] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[     3.413] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     3.413] (**) Option "xkb_model" "pc104"
[     3.413] (**) Option "xkb_layout" "us"
[     3.413] (**) Option "xkb_variant" "dvorak"
[     3.413] (**) Option "xkb_options" "caps:swapescape"
[     3.414] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     3.414] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[     3.415] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     3.415] (II) No input driver specified, ignoring this device.
[     3.415] (II) This device may have been added with another device file.
[     4.828] (II) intel(0): EDID vendor "AUO", prod id 53741
[     4.828] (II) intel(0): Using EDID range info for horizontal sync
[     4.828] (II) intel(0): Using EDID range info for vertical refresh
[     4.828] (II) intel(0): Printing DDC gathered Modelines:
[     4.828] (II) intel(0): Modeline "1920x1080"x0.0  285.00  1920 2028 2076 2076  1080 1090 1100 1142 -hsync -vsync (137.3 kHz eP)
[     6.226] (EE) event7  - MSFT0001:01 06CB:CE2D Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.20.0/touchpad-jumping-cursors.html for details
[     7.339] (EE) event7  - MSFT0001:01 06CB:CE2D Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.20.0/touchpad-jumping-cursors.html for details
[   210.005] (EE) event7  - MSFT0001:01 06CB:CE2D Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.20.0/touchpad-jumping-cursors.html for details
[   216.349] (EE) event7  - MSFT0001:01 06CB:CE2D Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.20.0/touchpad-jumping-cursors.html for details
[   275.545] (EE) event7  - MSFT0001:01 06CB:CE2D Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.20.0/touchpad-jumping-cursors.html for details
[   275.545] (EE) event7  - MSFT0001:01 06CB:CE2D Touchpad: WARNING: log rate limit exceeded (5 msgs per 24h). Discarding future messages.
[  3995.684] (EE) 
[  3995.684] (EE) Backtrace:
[  3995.684] (EE) 0: /usr/lib/Xorg (xorg_backtrace+0x89) [0x563f4bae8099]
[  3995.684] (EE) 1: /usr/lib/Xorg (0x563f4b998000+0x15aeb9) [0x563f4baf2eb9]
[  3995.684] (EE) 2: /usr/lib/libc.so.6 (0x7fd0f3d50000+0x42560) [0x7fd0f3d92560]
[  3995.684] (EE) 3: /usr/lib/Xorg (0x563f4b998000+0x7b253) [0x563f4ba13253]
[  3995.685] (EE) 4: /usr/lib/Xorg (XkbHandleActions+0x1d4) [0x563f4bade7f4]
[  3995.685] (EE) 5: /usr/lib/Xorg (0x563f4b998000+0x1dd262) [0x563f4bb75262]
[  3995.685] (EE) 6: /usr/lib/Xorg (0x563f4b998000+0x134cbe) [0x563f4bacccbe]
[  3995.685] (EE) 7: /usr/lib/Xorg (0x563f4b998000+0x14e444) [0x563f4bae6444]
[  3995.685] (EE) 8: /usr/lib/Xorg (WaitForSomething+0x2e2) [0x563f4bae6752]
[  3995.685] (EE) 9: /usr/lib/Xorg (0x563f4b998000+0x3c87b) [0x563f4b9d487b]
[  3995.685] (EE) 10: /usr/lib/libc.so.6 (0x7fd0f3d50000+0x2d310) [0x7fd0f3d7d310]
[  3995.685] (EE) 11: /usr/lib/libc.so.6 (__libc_start_main+0x81) [0x7fd0f3d7d3c1]
[  3995.686] (EE) 12: /usr/lib/Xorg (_start+0x25) [0x563f4b9d5795]
[  3995.686] (EE) 
[  3995.686] (EE) Segmentation fault at address 0x7ffd87ca7000
[  3995.686] (EE) 
Fatal server error:
[  3995.686] (EE) Caught signal 11 (Segmentation fault). Server aborting
[  3995.686] (EE) 
[  3995.686] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  3995.686] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  3995.686] (EE) 
[  3995.740] (EE) Server terminated with error (1). Closing log file.

Offline

#8 2022-04-07 11:57:47

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,261

Re: BSPWM restart on its own

[  3995.684] (EE) Backtrace:
[  3995.684] (EE) 0: /usr/lib/Xorg (xorg_backtrace+0x89) [0x563f4bae8099]
[  3995.684] (EE) 1: /usr/lib/Xorg (0x563f4b998000+0x15aeb9) [0x563f4baf2eb9]
[  3995.684] (EE) 2: /usr/lib/libc.so.6 (0x7fd0f3d50000+0x42560) [0x7fd0f3d92560]
[  3995.684] (EE) 3: /usr/lib/Xorg (0x563f4b998000+0x7b253) [0x563f4ba13253]
[  3995.685] (EE) 4: /usr/lib/Xorg (XkbHandleActions+0x1d4) [0x563f4bade7f4]
[  3995.685] (EE) 5: /usr/lib/Xorg (0x563f4b998000+0x1dd262) [0x563f4bb75262]
[  3995.685] (EE) 6: /usr/lib/Xorg (0x563f4b998000+0x134cbe) [0x563f4bacccbe]
[  3995.685] (EE) 7: /usr/lib/Xorg (0x563f4b998000+0x14e444) [0x563f4bae6444]
[  3995.685] (EE) 8: /usr/lib/Xorg (WaitForSomething+0x2e2) [0x563f4bae6752]
[  3995.685] (EE) 9: /usr/lib/Xorg (0x563f4b998000+0x3c87b) [0x563f4b9d487b]
[  3995.685] (EE) 10: /usr/lib/libc.so.6 (0x7fd0f3d50000+0x2d310) [0x7fd0f3d7d310]
[  3995.685] (EE) 11: /usr/lib/libc.so.6 (__libc_start_main+0x81) [0x7fd0f3d7d3c1]
[  3995.686] (EE) 12: /usr/lib/Xorg (_start+0x25) [0x563f4b9d5795]

https://bbs.archlinux.org/viewtopic.php?id=271450

Other (likely unrelated) problem:

[     2.829] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[     2.829] (EE) AIGLX error: unable to load driver i965
[     2.986] (II) IGLX: Loaded and initialized swrast
[     2.986] (II) GLX: Initialized DRISWRAST GL provider for screen 0

You need https://archlinux.org/packages/extra/x86_64/mesa-amber/ instead of mesa.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

Pages: 1

Board footer

Powered by FluxBB