You are not logged in.
Hello Everyone,
I'm trying to arrange the best .conkyrc for me so I need some examples with some screenshots.. I've seen some great conky views but can't find it now.. So if you don't mind, I want your example screenshots with your configuration files please..
Thanks a lot..
PS: I'll post the result afterwards..
Quis custodiet ipsos custodiet?
Offline
background yes
use_xft yes
xftfont Bitstream Vera Sans Mono:size=8
xftalpha 0.8
out_to_console no
update_interval 1.0
total_run_times 0
own_window no
double_buffer yes
minimum_size 280 5
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
stippled_borders 0
border_margin 4
border_width 1
default_color black
default_shade_color black
default_outline_color black
alignment bottom_left
gap_x 5
gap_y 5
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale no
use_spacer no
TEXT
$hr
${color black}$nodename - $sysname $kernel on $machine ${pre_exec uname -p | sed -e 's/(R)//g'} Uptime:${color blue} $uptime ${color black}- Load:${color blue} $loadavg CPU Usage:${color red} $cpu% ${color black}RAM Usage:${color blue}$mem/$memmax - $memperc% ${color black}Swap Usage:${color blue} $swap/$swapmax - $swapperc% $color Disk Usage: ${color blue} ${fs_used /bin/bash}/${fs_size /bin/bash} - ${fs_free_perc /bin/bash}% Free
It's a nice one liner at the bottom
here be the screeny
Offline
great topic
There shouldn't be any reason to learn more editor types than emacs or vi -- mg (1)
[You learn that sarcasm does not often work well in international forums. That is why we avoid it. -- ewaller (arch linux forum moderator)
Offline
.
Last edited by benplaut (2021-06-25 12:38:53)
Offline
Top left:
http://i54.photobucket.com/albums/g87/s … shot-1.jpg
conkyrc:
background yes
use_xft yes
xftfont Monospace:size=11
xftalpha 0.8
out_to_console no
update_interval 2
total_run_times 0
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
draw_shades yes
draw_outline no
draw_borders no
draw_graph_borders yes
stippled_borders 5
border_margin 4
border_width 1
default_color white
default_shade_color black
default_outline_color black
alignment top_left
gap_x 10
gap_y 47
no_buffers no
uppercase no
override_utf8_locale no
use_spacer no
TEXT
${color white}$alignc$sysname $kernel on $machine
${color white}$alignc${exec whoami} @ $nodename
${color white}$alignc Uptime: ${color white}$uptime
$color$stippled_hr
${color slate grey}Date: ${color white}${time %A,%d %B}
${color slate grey}Time: ${color white}${time %k:%M:%S}
$color$stippled_hr
${color slate grey}CPU:${color white} ${cpu cpu1}% ${cpubar cpu1}
${color slate grey}RAM:${color white} $memperc% $mem/$memmax $membar
${color slate grey}Swap: ${color white}$swapperc% $swap/$swapmax ${swapbar}
${color slate grey}Processes: ${color }$processes
${color slate grey}Running: ${color }$running_processes
$color$stippled_hr
${color slate grey}Highest CPU:
${color} ${top name 1}${top cpu 1}
${color} ${top name 2}${top cpu 2}
${color} ${top name 3}${top cpu 3}
${color slate grey}Highest MEM:
${color} ${top_mem name 1}${top_mem mem 1}
${color} ${top_mem name 2}${top_mem mem 2}
${color} ${top_mem name 3}${top_mem mem 3}
$color$stippled_hr
${color slate grey}Net Down:$color ${downspeed wlan0} k/s${color slate grey} ${offset 62}Net Up:$color ${upspeed wlan0} k/s
$color$stippled_hr
Offline
Are these people the only ones who uses conky ? Please... Come on everyone.. Share your config files..
Quis custodiet ipsos custodiet?
Offline
cat ~/.conky (on top)
cat .conkytodo (top right)
cat .conkympd (bottom right)
The "pegel" in the bottom left is quite the same as the .conkympd.
Well I changed a lot while changing my themes, so there may be some options that are useless or crappy.
Does anyone know how I can remove the one pixel line among the border (in .conky / the conky on top)?
edit: I uploaded my files to arch.pastebin.com in order to keep this thread clear. pastebin.com is damn slow! ):
Hail to the thief!
Offline
.
Last edited by benplaut (2021-06-25 12:36:57)
Offline
# set to yes if you want Conky to be forked in the background
background no
cpu_avg_samples 2
net_avg_samples 2
double_buffer yes
own_window yes
own_window_transparent yes
own_window_type desktop
update_interval 2
own_window_hints below
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
#out_to_console no
# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1
#font -artwiz-snap-normal-r-normal-*-10-100-75-75-*-*-*-*
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
xftfont monospace-10
# Text alpha when using Xft
xftalpha 0.8
# mail spool
mail_spool $MAIL
# Update interval in seconds
update_interval 1
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer no
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 10
# border margins
border_margin 4
# border width
border_width 1
# Default colors and also border colors
default_color yellow
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 15
gap_y 15
alignment top_left
#alignment top_left
# Gap between borders of screen and text
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer yes
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument
#${font Dungeon:style=Bold:pixelsize=10}I can change the font as well
#${font Verdana:size=10}as many times as I choose
#${font Perry:size=10}Including UTF-8,
#${font Luxi Mono:size=10}justo como este texto que o google traduz fêz o português
# stuff after 'TEXT' will be formatted on screen
#${font Grunge:size=12}${time %a %b %d}${alignr -25}${time %k:%M}
TEXT
$alignc${color lightgrey}$nodename - $sysname $kernel on $machine
$hr
${alignc}${color lightgrey}$time
${alignc}${color lightgrey}CPU freq:$color $freq MHz ${color lightgrey}CPU temp:$color $i8k_cpu_temp C
${alignc}${color lightgrey}Battery:$color $battery
${alignc}${color lightgrey}Left fan:$color $i8k_left_fan_status ${color lightgrey}Speed:$color $i8k_left_fan_rpm
${alignc}${color lightgrey}Right fan:$color $i8k_right_fan_status ${color lightgrey}Speed:$color $i8k_right_fan_rpm
$hr
${color lightgrey}Uptime:$color $uptime ${color lightgrey}- Load:$color $loadavg
${color lightgrey}CPU Usage:${color red} ${cpu}% ${cpubar}
${color black}${cpugraph 000000 ff0000}
${color lightgrey}RAM Usage:$color $mem/$memmax - $memperc% $membar
${color lightgrey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar}
${color lightgrey}Processes:$color $processes ${color lightgrey}Running:$color $running_processes
$color$hr
${color lightgrey}Networking:
${alignc} eth0
Down:${color #22ccff} ${downspeedf eth0} ${color lightgrey} k/s ${alignr}${color #22ccff}${totaldown eth0} ${color lightgrey}total
${color black}${downspeedgraph eth0 32,410 ff0000 0000ff} ${color lightgrey}
Up:${color #22ccff} ${upspeedf eth0} ${color lightgrey} k/s ${alignr}${color #22ccff}${totalup eth0} ${color lightgrey}total
${color black}${upspeedgraph eth0 32,410 0000ff ff0000}
${alignc}${color lightgrey} eth1 ${color black}
Down:${color #22ccff} ${downspeedf eth1} ${color lightgrey} k/s ${alignr}${color #22ccff}${totaldown eth1} ${color lightgrey}total
${color black}${downspeedgraph eth1 32,410 ff0000 0000ff} ${color lightgrey}
Up:${color #22ccff} ${upspeedf eth1} ${color lightgrey} k/s ${alignr}${color #22ccff}${totalup eth1} ${color lightgrey}total
${color black}${upspeedgraph eth1 32,410 0000ff ff0000}
$color$hr
${color lightgrey}File systems:$color
/ $color${fs_used /}/${fs_size /} ${fs_bar /}
/home $color${fs_used /home}/${fs_size /home} ${fs_bar /home}
/win_d $color${fs_used /win_d}/${fs_size /win_d} ${fs_bar /win_d}
/win_e $color${fs_used /win_e}/${fs_size /win_e} ${fs_bar /win_e}
$color $hr
${color lightgrey}MPD:
${color green}${alignc}$mpd_smart ${color #88aadd}$mpd_elapsed/$mpd_length $mpd_percent%
${color pink}$mpd_bar
${alignc}${color lightgrey}Status: ${color}$mpd_status ${color lightgrey}Random: ${color}$mpd_random ${color lightgrey}Repeat: ${color}$mpd_repeat ${color lightgrey}Vol: ${color}$mpd_vol
$color $hr
${color}Name PID CPU% MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color}Mem usage
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
Offline
pastebin.ca is much, much better!
Thanks!, I'll give it a try.
# Draw outlines? draw_outline no
^i think that's the one
Unfortunatly not. ): But thanks anyway.
Hail to the thief!
Offline
Offline
conkyrc
weather.sh
weather.xslt
Weather scripts stolen from http://conky.sourceforge.net/screenshots.html
Feel free to correct my English
Offline
xml+bash is just wrong. It's so much easier in python
#!/usr/bin/python
import feedparser as fp
import sys
feed = fp.parse(sys.argv[1])
lines = int(sys.argv[2])
for i in range(lines):
entries = feed.entries[i]
title = entries.title[:100]
print ' %s' % title
run it with ${execi 300 /home/youruser/scripts/conky-rss.py http://www.archlinux.org/feeds/news/ 3}
You'll need python-feedparser from extra.
Offline
Very nice conky,I can't remember where I got from.
Does anyone know how to make that clock in the conky?
Offline
.
Last edited by benplaut (2021-06-25 12:32:56)
Offline
Very nice conky,I can't remember where I got from.
Does anyone know how to make that clock in the conky?
This is gkrellm, not conky.
Offline
Check to make sure you have libxdamage installed.
Hi. I'm a sig. What are you?
Offline
I downloaded the source from conky.sourceforge.net and tried to compile it from source.
Don't do it this way. Use abs + makepkg.. it will handle dependencies and get installed through pacman.
I am a gated community.
Offline
My site doesn't allow hotlinking, so you will have to go here if you want the scripts and conkyrc.
conky-gmail: Show number of new messages in gmail account and displays sender/subject of five latest emails.
conky-weather: Current conditions and 5 day forecast of local weather
conky-arch_updates: Checks to see if any packages installed on your system are upgradable and lists the new versions.
Hi. I'm a sig. What are you?
Offline
My site doesn't allow hotlinking, so you will have to go here if you want the scripts and conkyrc.
Nice conky and nice script,by the way, I can't open the URL that you provided,so is there another way to download them?
Offline
vredfreak wrote:My site doesn't allow hotlinking, so you will have to go here if you want the scripts and conkyrc.
Nice conky and nice script,by the way, I can't open the URL that you provided,so is there another way to download them?
Seems to work fine for me, but here it is again anyway just in case.
Hi. I'm a sig. What are you?
Offline
jazzi wrote:vredfreak wrote:My site doesn't allow hotlinking, so you will have to go here if you want the scripts and conkyrc.
Nice conky and nice script,by the way, I can't open the URL that you provided,so is there another way to download them?
Seems to work fine for me, but here it is again anyway just in case.
Thanks for your coming,vredfreak.But it seems the DNS can't resolve the url,Could you give me the IP of your url.
Thanks again.
host www.atspace.com
*** Nameserver not responding
!!! www.atspace.com A record not found, try again
Offline
The address of the server seems to be 64.27.12.150 but ... I can access the URL ( http://vredfreak.atspace.com/projects.html) without problems.
Offline
The address of the server seems to be 64.27.12.150 but ... I can access the URL ( http://vredfreak.atspace.com/projects.html) without problems.
I don't know what' s the problem,maybe it's been restricted.
Could you do me a favor, packet it and send it to my email-box:
jazzihong22 A.T gmail D.O.T com
Thanks
Offline
I'll do that and send along mine too.
Offline