You are not logged in.
Hey, I was using my mic with no problem until yesterday. Then I got that horrible problem of feedback loop.
here are my configs on KDE's audio system settings:
https://i.imgur.com/WwcdBU0.png
https://i.imgur.com/ewe979c.png
anything wrong?
Offline
Here's a quick demo of what's going on:
https://www.youtube.com/watch?v=S4YbcRx0fEU
Edit: Also noted it's on that feedback even with mic unplugged (3.5mm jack).
Last edited by pvpmartins (2022-05-11 04:36:46)
Offline
Post the outputs of
arecord -lL
amixer -c0 #Or whatever number the above output shows as the index nr
pactl list sources
pactl list source-outputs
during problematic reproduction in code tags.
Last edited by V1del (2022-05-11 21:45:14)
Offline
arecord -lL
[pvpmartins@arch ~]$ arecord -lL
null
Discard all samples (playback) or generate zero samples (capture)
lavrate
Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pipewire
PipeWire Sound Server
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
default
Default ALSA Output (currently PipeWire Media Server)
sysdefault:CARD=Loopback
Loopback, Loopback PCM
Default Audio Device
front:CARD=Loopback,DEV=0
Loopback, Loopback PCM
Front output / input
usbstream:CARD=Loopback
Loopback
USB Stream Output
usbstream:CARD=Generic
HD-Audio Generic
USB Stream Output
sysdefault:CARD=Generic_1
HD-Audio Generic, ALC887-VD Analog
Default Audio Device
front:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC887-VD Analog
Front output / input
usbstream:CARD=Generic_1
HD-Audio Generic
USB Stream Output
**** List of CAPTURE Hardware Devices ****
card 0: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 0: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 2: Generic_1 [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Generic_1 [HD-Audio Generic], device 2: ALC887-VD Alt Analog [ALC887-VD Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
amxer -c0
bash: amxer: command not found
pactl list sources
Source #47
State: SUSPENDED
Name: alsa_output.pci-0000_09_00.6.iec958-stereo.monitor
Description: Monitor of Family 17h/19h HD Audio Controller (PRIME B450M-A Motherboard) Digital Stereo (IEC958)
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_09_00.6.iec958-stereo
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:pcm:2:iec958:2:playback"
api.alsa.path = "iec958:2"
api.alsa.pcm.card = "2"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "1"
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "monitor"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC887-VD Digital"
alsa.id = "ALC887-VD Digital"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "1"
alsa.card = "2"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfcb80000 irq 98"
alsa.driver_name = "snd_hda_intel"
device.profile.name = "iec958-stereo"
device.profile.description = "Digital Stereo (IEC958)"
card.profile.device = "6"
device.id = "43"
factory.name = "api.alsa.pcm.sink"
priority.driver = "608"
priority.session = "608"
media.class = "Audio/Sink"
node.nick = "HD-Audio Generic"
node.name = "alsa_output.pci-0000_09_00.6.iec958-stereo"
device.description = "Family 17h/19h HD Audio Controller (PRIME B450M-A Motherboard) Digital Stereo (IEC958)"
device.icon_name = "audio-card-iec958"
device.bus = "pci"
device.bus_path = "pci-0000:09:00.6"
node.pause-on-idle = "false"
factory.id = "18"
client.id = "32"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "42"
object.serial = "47"
Formats:
pcm
Source #48
State: SUSPENDED
Name: alsa_output.platform-snd_aloop.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.platform-snd_aloop.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:pcm:0:front:0:playback"
api.alsa.path = "front:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "1"
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "monitor"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Loopback PCM"
alsa.id = "Loopback PCM"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "Loopback"
alsa.long_card_name = "Loopback 1"
alsa.driver_name = "snd_aloop"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
card.profile.device = "11"
device.id = "44"
factory.name = "api.alsa.pcm.sink"
priority.driver = "1009"
priority.session = "1009"
media.class = "Audio/Sink"
node.nick = "Loopback"
node.name = "alsa_output.platform-snd_aloop.0.analog-stereo"
device.description = "Built-in Audio Analog Stereo"
device.icon_name = "audio-card-analog"
device.bus_path = "platform-snd_aloop.0"
device.form_factor = "internal"
node.pause-on-idle = "false"
factory.id = "18"
client.id = "32"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "34"
object.serial = "48"
node.max-latency = "16384/48000"
Formats:
pcm
Source #49
State: SUSPENDED
Name: alsa_input.platform-snd_aloop.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:pcm:0:front:0:capture"
api.alsa.path = "front:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "capture"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "1"
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Loopback PCM"
alsa.id = "Loopback PCM"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "Loopback"
alsa.long_card_name = "Loopback 1"
alsa.driver_name = "snd_aloop"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
card.profile.device = "0"
device.id = "44"
factory.name = "api.alsa.pcm.source"
priority.driver = "2009"
priority.session = "2009"
media.class = "Audio/Source"
node.nick = "Loopback"
node.name = "alsa_input.platform-snd_aloop.0.analog-stereo"
device.description = "Built-in Audio Analog Stereo"
device.icon_name = "audio-input-microphone-analog"
device.bus_path = "platform-snd_aloop.0"
device.form_factor = "internal"
node.pause-on-idle = "false"
factory.id = "18"
client.id = "32"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "split"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "45"
object.serial = "49"
Ports:
analog-input: Analog Input (type: Analog, priority: 10000, availability unknown)
Active Port: analog-input
Formats:
pcm
and "pactl list source-outputs" didn't output anything.
Last edited by pvpmartins (2022-05-11 15:12:17)
Offline
"amixer" but I'd not be surprised if that wasn't another result of the pipewire clusterfuck that's spamming across the boards…
Offline
Here it is:
amixer -c0
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Offline
I guess -c2 would be more interesting, but did you try to mask wireplumber or install pipewire-media-session?
Offline
"amixer" but I'd not be surprised if that wasn't another result of the pipewire clusterfuck that's spamming across the boards…
I think that's a good guess of what's going on.
Offline
You could revert to pipewire-media-session if you were affected by that, as for the outputs you have no source outside of the loopbacks
Offline
amixer -c2
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
[pvpmartins@arch ~]$ amixer -c2
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 51 [80%] [-13.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 0 [0%] [-64.00dB] [off]
Front Right: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 254 [100%] [-0.20dB]
Front Right: Playback 254 [100%] [-0.20dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Line Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 46 [100%] [30.00dB] [on]
Front Right: Capture 46 [100%] [30.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 0 [0%] [-16.00dB] [off]
Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '2ch' '4ch' '6ch'
Item0: '2ch'
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Front Mic' 'Rear Mic' 'Line'
Item0: 'Rear Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Front Mic' 'Rear Mic' 'Line'
Item0: 'Front Mic'
Simple mixer control 'Loopback Mixing',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Rear Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Rear Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 3 [100%] [30.00dB]
Front Right: 3 [100%] [30.00dB]
Offline
I guess -c2 would be more interesting, but did you try to mask wireplumber or install pipewire-media-session?
No. At least I can't remember doing that.
I did tried though, to reinstall pipewire. But I have 0 knowledge on how those things works.
Offline
You could revert to pipewire-media-session if you were affected by that, as for the outputs you have no source outside of the loopbacks
Don't know what it is and how to do it.
Offline
I guess -c2 would be more interesting, but did you try to mask wireplumber or install pipewire-media-session?
I've noticed that I have pipewire-media-session installed instead of wireplumber. Should I keep the former or remove it in order to install WirePlumber?
Offline
Afaiu pipewire-media-session is not related to the many other problems, but wireplumber is.
Does the feedback loop exist w/o pulseaudio and/or pipewire?
The front mic is off, the rear mic is off, but the rear mic boost is on.
alsamixcer -c2
What if you mute the rear mic boost?
Offline
Afaiu pipewire-media-session is not related to the many other problems, but wireplumber is.
Does the feedback loop exist w/o pulseaudio and/or pipewire?The front mic is off, the rear mic is off, but the rear mic boost is on.
alsamixcer -c2
What if you mute the rear mic boost?
Rear mic boost muted. Nothing changed... Maybe I will just reinstall arch...
Last edited by pvpmartins (2022-05-13 06:03:05)
Offline
Does the feedback loop exist w/o pulseaudio and/or pipewire?
Eg. bot the multi-user.target, 2nd link below
Offline
Eg. bot the multi-user.target, 2nd link below
Sorry, don't understand what you mean.
Offline
Did you click the link? It explains how to not boot the graphical.target
That gives you a chance to make sure that the pulseaudio or pipewire dameons are not running and then you can check whether the feedback loop is still there.
Offline
Ok. Did boot without the GUI. Now, what how am I suppose to test it? I was using discord but now that I’m just on a terminal command, i can’t launch it.
Or may I just see the output of those commands you passed me?
Last edited by pvpmartins (2022-05-15 02:09:06)
Offline
Hold on, the feedback is only there when you're using discord? Not permanently?
I guess you're not getting when merely "mpv /path/to/thunderstruck.mp3"?
Is it a feedback loop or an echo?
Did you inspect the alsa and pulseaudio states while running discord (or the feedback was present otherwise)?
Is it a humming or just an echo from the speakers?
Does it happen w/ an external mic?
Offline
Hold on, the feedback is only there when you're using discord? Not permanently?
I guess you're not getting when merely "mpv /path/to/thunderstruck.mp3"?
Is it a feedback loop or an echo?
Did you inspect the alsa and pulseaudio states while running discord (or the feedback was present otherwise)?
Is it a humming or just an echo from the speakers?
Does it happen w/ an external mic?
It`s permanently. I just check if the problem persists on discord.
Well, like in the video. It sounds like a feedback loop, the input is getting the output sound and it keeps increasing its volume.
I did open the alsamixer while on discord.
It's just a humming.
Yes. Like I said above, even with the mic unplugged, I get this.
Offline
Ok, but if it's permanent what'S the implication of
Did boot without the GUI. Now, what how am I suppose to test it?
DO you get the feedback at this moment?
The video you posted has some constant background noise and then an obvious feedback loop when you test the microphone (and we don't know what discord is doing at this point)
Simply activating the microphone in alsamixer and playing w/ the devices (front/rea mic), their volume and the booster settings should allow you to figure what exactly causes the feedback.
No idea what the background noise is, though (sounds flapping?)
Offline
The thing is... Once I boot without the GUI I just don't know how to test the sound. The only reason I'm referring to discord is because I can hear what's going on in its audio settings section.
Offline
You don't need to "test the sound".
Again: are there any audio artifacts in the basic condition of the multi-user.target?
If not: run "alsamixer" and activate the mic(s) and there boosters and possibly also other input/output devices there until the artifact shows up.
Alternatively post
amixer -c2
pactl list sources
pactl list source-outputs
*while* "testing" the sound causes the artifact.
Information that you gather while the artifacts aren't present are worthless.
Offline
booted in multi-user.target:
alsamixer screenshot:
https://i.imgur.com/HH9FgNT.png
amixer:
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 59 [92%] [-5.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 0 [0%] [-64.00dB] [off]
Front Right: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 251 [98%] [-0.80dB]
Front Right: Playback 251 [98%] [-0.80dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Line Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 46 [100%] [30.00dB] [on]
Front Right: Capture 46 [100%] [30.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 0 [0%] [-16.00dB] [off]
Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '2ch' '4ch' '6ch'
Item0: '2ch'
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Front Mic' 'Rear Mic' 'Line'
Item0: 'Rear Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Front Mic' 'Rear Mic' 'Line'
Item0: 'Front Mic'
Simple mixer control 'Loopback Mixing',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Rear Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 23 [74%] [0.00dB] [off]
Front Right: Playback 23 [74%] [0.00dB] [off]
Simple mixer control 'Rear Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
pactl list sources:
Source #46
State: SUSPENDED
Name: alsa_output.pci-0000_09_00.6.analog-stereo.monitor
Description: Monitor of Family 17h/19h HD Audio Controller (PRIME B450M-A Motherboard) Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_09_00.6.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:pcm:2:front:2:playback"
api.alsa.path = "front:2"
api.alsa.pcm.card = "2"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "2"
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "monitor"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC887-VD Analog"
alsa.id = "ALC887-VD Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfcb80000 irq 98"
alsa.driver_name = "snd_hda_intel"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
card.profile.device = "5"
device.id = "42"
factory.name = "api.alsa.pcm.sink"
priority.driver = "881"
priority.session = "881"
media.class = "Audio/Sink"
node.nick = "HD-Audio Generic"
node.name = "alsa_output.pci-0000_09_00.6.analog-stereo"
device.description = "Family 17h/19h HD Audio Controller (PRIME B450M-A Motherboard) Analog Stereo"
device.icon_name = "audio-card-analog"
device.bus = "pci"
device.bus_path = "pci-0000:09:00.6"
node.pause-on-idle = "false"
factory.id = "18"
client.id = "33"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "46"
object.serial = "46"
Formats:
pcm
Source #47
State: SUSPENDED
Name: alsa_input.pci-0000_09_00.6.analog-stereo
Description: Family 17h/19h HD Audio Controller (PRIME B450M-A Motherboard) Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 20726 / 32% / -30.00 dB, front-right: 20726 / 32% / -30.00 dB
balance 0.00
Base Volume: 6554 / 10% / -60.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:pcm:2:front:2:capture"
api.alsa.path = "front:2"
api.alsa.pcm.card = "2"
api.alsa.pcm.stream = "capture"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "3"
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC887-VD Analog"
alsa.id = "ALC887-VD Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfcb80000 irq 98"
alsa.driver_name = "snd_hda_intel"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
card.profile.device = "0"
device.id = "42"
factory.name = "api.alsa.pcm.source"
priority.driver = "1881"
priority.session = "1881"
media.class = "Audio/Source"
node.nick = "HD-Audio Generic"
node.name = "alsa_input.pci-0000_09_00.6.analog-stereo"
device.description = "Family 17h/19h HD Audio Controller (PRIME B450M-A Motherboard) Analog Stereo"
device.icon_name = "audio-input-microphone-analog"
device.bus = "pci"
device.bus_path = "pci-0000:09:00.6"
node.pause-on-idle = "false"
factory.id = "18"
client.id = "33"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "split"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "47"
object.serial = "47"
Ports:
analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, availability group: Legacy 1, not available)
analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, availability group: Legacy 2, available)
analog-input-linein: Line In (type: Line, priority: 8100, availability group: Legacy 3, not available)
Active Port: analog-input-rear-mic
Formats:
pcm
Source #48
State: SUSPENDED
Name: alsa_output.platform-snd_aloop.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.platform-snd_aloop.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:pcm:0:front:0:playback"
api.alsa.path = "front:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "1"
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "monitor"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Loopback PCM"
alsa.id = "Loopback PCM"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "Loopback"
alsa.long_card_name = "Loopback 1"
alsa.driver_name = "snd_aloop"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
card.profile.device = "11"
device.id = "43"
factory.name = "api.alsa.pcm.sink"
priority.driver = "1009"
priority.session = "1009"
media.class = "Audio/Sink"
node.nick = "Loopback"
node.name = "alsa_output.platform-snd_aloop.0.analog-stereo"
device.description = "Built-in Audio Analog Stereo"
device.icon_name = "audio-card-analog"
device.bus_path = "platform-snd_aloop.0"
device.form_factor = "internal"
node.pause-on-idle = "false"
factory.id = "18"
client.id = "33"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "48"
object.serial = "48"
Formats:
pcm
couldn't get a responde from pactl list source-outputs.
Offline