You are not logged in.

Pages: 1 2

#1 2022-05-10 22:47:22

tripleab
Member
Registered: 2022-05-10
Posts: 14

Cursor Dissappeared in X11

I've just updated to linux-zen 5.17.5 and mesa-git 22.2. Since the upgrade, text has not been rendering properly in SDDM and my mouse cursor has not been showing on my desktop in i3wm, in SDDM and is only showing in some programs (tym, firefox and krita so far). I'm not sure if it is an issue with mesa as games still run with normal performance and everything else is rendering properly. I have also tried booting with linux-tkg-git 5.17.6 and I'm having the same issue. I'm also using xf86-video-amdgpu-git 22.0.0.r5 if that helps. It seems to me like an issue with supergfxctl as the result of 

systemctl status supergfxd

is 

May 10 23:17:57 arch-asus systemd[1]: Starting SUPERGFX...
May 10 23:17:57 arch-asus supergfxd[472]: INFO: Rescanning PCI bus
May 10 23:17:57 arch-asus systemd[1]: Started SUPERGFX.
May 10 23:17:57 arch-asus supergfxd[472]: ERROR: Gfx control: No dGPU found

Last edited by tripleab (2022-05-10 22:47:52)

Offline

#2 2022-05-11 05:42:04

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,251

Re: Cursor Dissappeared in X11

supergfxd[472]: ERROR: Gfx control: No dGPU found

Is this supposed to be a hybrid system itfp?
Please post the output of 

lspci -k

and your xorg log, https://wiki.archlinux.org/title/Xorg#General

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2022-05-11 15:14:33

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

It is a hybrid system, running an AMD 6800m and a 5900hs, and it is muxless so using PRIME.
Output of lspci -k is 

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex
	Subsystem: ASUSTeK Computer Inc. Device 16c2
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne IOMMU
	Subsystem: ASUSTeK Computer Inc. Device 16c2
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 16c2
	Kernel driver in use: pcieport
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 16c2
	Kernel driver in use: pcieport
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 16c2
	Kernel driver in use: pcieport
00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 16c2
	Kernel driver in use: pcieport
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
	Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
	Kernel driver in use: pcieport
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 51)
	Subsystem: ASUSTeK Computer Inc. Device 16c2
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
	Subsystem: ASUSTeK Computer Inc. Device 16c2
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 3
	Kernel driver in use: k10temp
	Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 7
01:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Upstream Port of PCI Express Switch (rev c3)
	Kernel driver in use: pcieport
02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch
	Kernel driver in use: pcieport
03:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M] (rev c3)
	Subsystem: ASUSTeK Computer Inc. Device 16c2
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller
	Subsystem: ASUSTeK Computer Inc. Device 16c2
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
	Subsystem: ASUSTeK Computer Inc. Device 208f
	Kernel driver in use: r8169
	Kernel modules: r8169
05:00.0 Network controller: MEDIATEK Corp. MT7921 802.11ax PCI Express Wireless Network Adapter
	Subsystem: AzureWave Device 4680
	Kernel driver in use: mt7921e
	Kernel modules: mt7921e
06:00.0 Non-Volatile memory controller: SK hynix Gold P31 SSD
	Subsystem: SK hynix Gold P31 SSD
	Kernel driver in use: nvme
	Kernel modules: nvme
07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne (rev c4)
	Subsystem: ASUSTeK Computer Inc. Device 16c2
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu
07:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Renoir Radeon High Definition Audio Controller
	Subsystem: ASUSTeK Computer Inc. Device 16c2
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
07:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor
	Subsystem: ASUSTeK Computer Inc. Device 16c2
	Kernel driver in use: ccp
	Kernel modules: ccp
07:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
	Subsystem: ASUSTeK Computer Inc. Device 201f
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
07:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
	Subsystem: ASUSTeK Computer Inc. Device 201f
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
07:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD] ACP/ACP3X/ACP6x Audio Coprocessor (rev 01)
	Subsystem: ASUSTeK Computer Inc. Device 104f
	Kernel modules: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x, snd_sof_amd_renoir
07:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD Audio Controller
	DeviceName: HD Audio Controller
	Subsystem: ASUSTeK Computer Inc. Device 104f
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

and xorg log is 

 [     5.828] (--) Log file renamed from "/var/log/Xorg.pid-683.log" to "/var/log/Xorg.0.log"
[     5.828] 
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[     5.828] Current Operating System: Linux arch-asus 5.17.6-256-tkg-bmq #1 TKG SMP PREEMPT Tue, 10 May 2022 21:37:56 +0000 x86_64
[     5.828] Kernel command line: intel_pstate=passive BOOT_IMAGE=/vmlinuz-linux517-tkg-bmq root=UUID=00dc1cb2-6c26-4233-9ce2-201b86be9230 rw loglevel=3 quiet
[     5.828]  
[     5.828] Current version of pixman: 0.40.0
[     5.828] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.828] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.829] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 11 16:06:47 2022
[     5.830] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.830] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.831] (==) ServerLayout "layout"
[     5.831] (==) No screen section available. Using defaults.
[     5.831] (**) |-->Screen "Default Screen Section" (0)
[     5.831] (**) |   |-->Monitor "<default monitor>"
[     5.831] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[     5.831] (**) |   |-->Device "AMD"
[     5.831] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.831] (==) Automatically adding devices
[     5.831] (==) Automatically enabling devices
[     5.831] (==) Automatically adding GPU devices
[     5.831] (==) Automatically binding GPU devices
[     5.831] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.832] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     5.832] 	Entry deleted from font path.
[     5.832] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[     5.832] 	Entry deleted from font path.
[     5.832] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     5.832] 	Entry deleted from font path.
[     5.832] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.832] 	Entry deleted from font path.
[     5.832] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     5.832] 	Entry deleted from font path.
[     5.832] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     5.832] 	Entry deleted from font path.
[     5.832] (==) FontPath set to:
	
[     5.832] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.832] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.832] (II) Module ABI versions:
[     5.832] 	X.Org ANSI C Emulation: 0.4
[     5.832] 	X.Org Video Driver: 25.2
[     5.832] 	X.Org XInput driver : 24.4
[     5.832] 	X.Org Server Extension : 10.0
[     5.832] (++) using VT number 1

[     5.832] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.832] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.832] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.0/drm/card0
[     5.833] (II) xfree86: Adding drm device (/dev/dri/card1)
[     5.833] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:07:00.0/drm/card1
[     5.840] (--) PCI: (3@0:0:0) 1002:73df:1043:16c2 rev 195, Mem @ 0xf800000000/17179869184, 0xfc00000000/268435456, 0xfcb00000/1048576, BIOS @ 0x????????/131072
[     5.840] (--) PCI:*(7@0:0:0) 1002:1638:1043:16c2 rev 196, Mem @ 0xfc20000000/268435456, 0xfc30000000/2097152, 0xfca00000/524288, I/O @ 0x0000e000/256
[     5.840] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     5.840] (II) LoadModule: "glx"
[     5.841] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.844] (II) Module glx: vendor="X.Org Foundation"
[     5.844] 	compiled for 1.21.1.3, module version = 1.0.0
[     5.844] 	ABI class: X.Org Server Extension, version 10.0
[     5.844] (II) LoadModule: "amdgpu"
[     5.844] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[     5.845] (II) Module amdgpu: vendor="X.Org Foundation"
[     5.845] 	compiled for 1.21.1.3, module version = 22.0.0
[     5.845] 	Module class: X.Org Video Driver
[     5.845] 	ABI class: X.Org Video Driver, version 25.2
[     5.845] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[     5.848] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.848] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[     5.848] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     5.848] (==) AMDGPU(0): Default visual is TrueColor
[     5.848] (**) AMDGPU(0): Option "EnablePageFlip" "off"
[     5.848] (**) AMDGPU(0): Option "TearFree" "false"
[     5.848] (**) AMDGPU(0): Option "VariableRefresh" "true"
[     5.848] (==) AMDGPU(0): RGB weight 888
[     5.848] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[     5.848] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x1638)
[     5.848] (II) Loading sub module "fb"
[     5.848] (II) LoadModule: "fb"
[     5.848] (II) Module "fb" already built-in
[     5.848] (II) Loading sub module "dri2"
[     5.848] (II) LoadModule: "dri2"
[     5.848] (II) Module "dri2" already built-in
[     5.931] (II) Loading sub module "glamoregl"
[     5.931] (II) LoadModule: "glamoregl"
[     5.931] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     5.934] (II) Module glamoregl: vendor="X.Org Foundation"
[     5.934] 	compiled for 1.21.1.3, module version = 1.0.1
[     5.934] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.941] (II) AMDGPU(0): glamor X acceleration enabled on RENOIR (renoir, LLVM 13.0.1, DRM 3.44, 5.17.6-256-tkg-bmq)
[     5.941] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[     5.941] (**) AMDGPU(0): TearFree property default: off
[     5.941] (**) AMDGPU(0): VariableRefresh: enabled
[     5.941] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[     5.941] (II) AMDGPU(0): KMS Pageflipping: disabled
[     5.943] (II) AMDGPU(0): Output eDP has no monitor section
[     5.943] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[     5.947] (II) AMDGPU(0): EDID for output eDP
[     5.947] (II) AMDGPU(0): Manufacturer: TMX  Model: 1560  Serial#: 0
[     5.947] (II) AMDGPU(0): Year: 2020  Week: 23
[     5.947] (II) AMDGPU(0): EDID Version: 1.4
[     5.947] (II) AMDGPU(0): Digital Display Input
[     5.947] (II) AMDGPU(0): 8 bits per channel
[     5.947] (II) AMDGPU(0): Digital interface is DisplayPort
[     5.947] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     5.947] (II) AMDGPU(0): Gamma: 2.20
[     5.947] (II) AMDGPU(0): No DPMS capabilities specified
[     5.947] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 
[     5.947] (II) AMDGPU(0): Default color space is primary color space
[     5.947] (II) AMDGPU(0): First detailed timing is preferred mode
[     5.947] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[     5.947] (II) AMDGPU(0): Display is continuous-frequency
[     5.947] (II) AMDGPU(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[     5.947] (II) AMDGPU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[     5.947] (II) AMDGPU(0): Manufacturer's mask: 0
[     5.947] (II) AMDGPU(0): Supported detailed timing:
[     5.947] (II) AMDGPU(0): clock: 133.3 MHz   Image Size:  344 x 194 mm
[     5.947] (II) AMDGPU(0): h_active: 1920  h_sync: 1963  h_sync_end 1995 h_blank_end 2000 h_border: 0
[     5.947] (II) AMDGPU(0): v_active: 1080  v_sync: 1103  v_sync_end 1108 v_blanking: 1111 v_border: 0
[     5.947] (II) AMDGPU(0): Ranges: V min: 48 V max: 300 Hz, H min: 335 H max: 335 kHz, PixClock max 675 MHz
[     5.947] (II) AMDGPU(0): Monitor name: TL156VDXP01
[     5.947] (II) AMDGPU(0): Number of EDID sections to follow: 1
[     5.947] (II) AMDGPU(0): EDID (in hex):
[     5.947] (II) AMDGPU(0): 	00ffffffffffff0051b8601500000000
[     5.947] (II) AMDGPU(0): 	171e0104a522137807ee91a3544c9926
[     5.947] (II) AMDGPU(0): 	0f505400000001010101010101010101
[     5.947] (II) AMDGPU(0): 	0101010101011434805070381f402b20
[     5.947] (II) AMDGPU(0): 	750458c210000018000000fd0e302d50
[     5.947] (II) AMDGPU(0): 	5043010a20202020202000000010000a
[     5.947] (II) AMDGPU(0): 	202020202020202020202020000000fc
[     5.947] (II) AMDGPU(0): 	00544c3135365644585030310a2001d6
[     5.947] (II) AMDGPU(0): 	7013790000030114630401847f074f00
[     5.947] (II) AMDGPU(0): 	2a001f0037041e001600040000000000
[     5.947] (II) AMDGPU(0): 	00000000000000000000000000000000
[     5.947] (II) AMDGPU(0): 	00000000000000000000000000000000
[     5.947] (II) AMDGPU(0): 	00000000000000000000000000000000
[     5.947] (II) AMDGPU(0): 	00000000000000000000000000000000
[     5.947] (II) AMDGPU(0): 	00000000000000000000000000000000
[     5.947] (II) AMDGPU(0): 	0000000000000000000000000000df90
[     5.947] (II) AMDGPU(0): Printing probed modes for output eDP
[     5.947] (II) AMDGPU(0): Modeline "1920x1080"x300.0  666.60  1920 1963 1995 2000  1080 1103 1108 1111 -hsync -vsync (333.3 kHz eP)
[     5.947] (II) AMDGPU(0): Modeline "1920x1080"x60.0  133.32  1920 1963 1995 2000  1080 1103 1108 1111 -hsync -vsync (66.7 kHz eP)
[     5.947] (II) AMDGPU(0): Modeline "1680x1050"x300.0  666.60  1680 1963 1995 2000  1050 1103 1108 1111 -hsync -vsync (333.3 kHz e)
[     5.947] (II) AMDGPU(0): Modeline "1280x1024"x300.0  666.60  1280 1963 1995 2000  1024 1103 1108 1111 -hsync -vsync (333.3 kHz e)
[     5.947] (II) AMDGPU(0): Modeline "1440x900"x300.0  666.60  1440 1963 1995 2000  900 1103 1108 1111 -hsync -vsync (333.3 kHz e)
[     5.947] (II) AMDGPU(0): Modeline "1280x800"x300.0  666.60  1280 1963 1995 2000  800 1103 1108 1111 -hsync -vsync (333.3 kHz e)
[     5.947] (II) AMDGPU(0): Modeline "1280x720"x300.0  666.60  1280 1963 1995 2000  720 1103 1108 1111 -hsync -vsync (333.3 kHz e)
[     5.947] (II) AMDGPU(0): Modeline "1024x768"x300.0  666.60  1024 1963 1995 2000  768 1103 1108 1111 -hsync -vsync (333.3 kHz e)
[     5.947] (II) AMDGPU(0): Modeline "800x600"x300.0  666.60  800 1963 1995 2000  600 1103 1108 1111 -hsync -vsync (333.3 kHz e)
[     5.947] (II) AMDGPU(0): Modeline "640x480"x300.0  666.60  640 1963 1995 2000  480 1103 1108 1111 -hsync -vsync (333.3 kHz e)
[     5.947] (II) AMDGPU(0): EDID for output HDMI-A-0
[     5.947] (II) AMDGPU(0): Output eDP connected
[     5.947] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[     5.947] (II) AMDGPU(0): Using exact sizes for initial modes
[     5.947] (II) AMDGPU(0): Output eDP using initial mode 1920x1080 +0+0
[     5.947] (II) AMDGPU(0): mem size init: gart size :2d43f1000 vram size: s:1df2c000 visible:1df2c000
[     5.947] (==) AMDGPU(0): DPI set to (96, 96)
[     5.947] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.947] (II) Loading sub module "ramdac"
[     5.947] (II) LoadModule: "ramdac"
[     5.947] (II) Module "ramdac" already built-in
[     5.947] (==) AMDGPU(G0): Depth 24, (--) framebuffer bpp 32
[     5.947] (II) AMDGPU(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     5.947] (==) AMDGPU(G0): Default visual is TrueColor
[     5.947] (==) AMDGPU(G0): RGB weight 888
[     5.947] (II) AMDGPU(G0): Using 8 bits per RGB (8 bit DAC)
[     5.947] (--) AMDGPU(G0): Chipset: "AMD Radeon RX 6800M" (ChipID = 0x73df)
[     5.947] (II) Loading sub module "fb"
[     5.947] (II) LoadModule: "fb"
[     5.947] (II) Module "fb" already built-in
[     5.947] (II) Loading sub module "dri2"
[     5.947] (II) LoadModule: "dri2"
[     5.947] (II) Module "dri2" already built-in
[     5.951] (II) Loading sub module "glamoregl"
[     5.951] (II) LoadModule: "glamoregl"
[     5.952] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     5.952] (II) Module glamoregl: vendor="X.Org Foundation"
[     5.952] 	compiled for 1.21.1.3, module version = 1.0.1
[     5.952] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.956] (II) AMDGPU(G0): glamor X acceleration enabled on AMD Radeon RX 6800M (navy_flounder, LLVM 13.0.1, DRM 3.44, 5.17.6-256-tkg-bmq)
[     5.956] (II) AMDGPU(G0): glamor detected, initialising EGL layer.
[     5.956] (==) AMDGPU(G0): TearFree property default: auto
[     5.956] (II) AMDGPU(G0): Output DisplayPort-1-0 has no monitor section
[     5.956] (II) AMDGPU(G0): EDID for output DisplayPort-1-0
[     5.956] (II) AMDGPU(G0): mem size init: gart size :2d428a000 vram size: s:2fd7ef000 visible:2fd7ef000
[     5.956] (==) AMDGPU(G0): DPI set to (96, 96)
[     5.956] (==) AMDGPU(G0): Using gamma correction (1.0, 1.0, 1.0)
[     5.956] (II) Loading sub module "ramdac"
[     5.956] (II) LoadModule: "ramdac"
[     5.956] (II) Module "ramdac" already built-in
[     5.956] (II) AMDGPU(0): [DRI2] Setup complete
[     5.956] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[     5.956] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[     5.961] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[     5.961] (II) AMDGPU(0): SYNC extension fences enabled
[     5.961] (II) AMDGPU(0): Present extension enabled
[     5.961] (==) AMDGPU(0): DRI3 enabled
[     5.961] (==) AMDGPU(0): Backing store enabled
[     5.961] (II) AMDGPU(0): Direct rendering enabled
[     5.968] (II) AMDGPU(0): Use GLAMOR acceleration.
[     5.968] (II) AMDGPU(0): Acceleration enabled
[     5.968] (==) AMDGPU(0): DPMS enabled
[     5.968] (==) AMDGPU(0): Silken mouse enabled
[     5.968] (II) AMDGPU(0): Set up textured video (glamor)
[     5.972] (II) AMDGPU(G0): [DRI2] Setup complete
[     5.972] (II) AMDGPU(G0): [DRI2]   DRI driver: radeonsi
[     5.972] (II) AMDGPU(G0): [DRI2]   VDPAU driver: radeonsi
[     5.977] (II) AMDGPU(G0): Front buffer pitch: 4096 bytes
[     5.977] (==) AMDGPU(G0): Backing store enabled
[     5.977] (II) AMDGPU(G0): Direct rendering enabled
[     5.979] (II) AMDGPU(G0): Use GLAMOR acceleration.
[     5.979] (II) AMDGPU(G0): Acceleration enabled
[     5.979] (==) AMDGPU(G0): DPMS enabled
[     5.979] (==) AMDGPU(G0): Silken mouse enabled
[     5.980] (II) Initializing extension Generic Event Extension
[     5.980] (II) Initializing extension SHAPE
[     5.980] (II) Initializing extension MIT-SHM
[     5.980] (II) Initializing extension XInputExtension
[     5.980] (II) Initializing extension XTEST
[     5.980] (II) Initializing extension BIG-REQUESTS
[     5.980] (II) Initializing extension SYNC
[     5.980] (II) Initializing extension XKEYBOARD
[     5.981] (II) Initializing extension XC-MISC
[     5.981] (II) Initializing extension SECURITY
[     5.981] (II) Initializing extension XFIXES
[     5.981] (II) Initializing extension RENDER
[     5.981] (II) Initializing extension RANDR
[     5.981] (II) Initializing extension COMPOSITE
[     5.981] (II) Initializing extension DAMAGE
[     5.981] (II) Initializing extension MIT-SCREEN-SAVER
[     5.981] (II) Initializing extension DOUBLE-BUFFER
[     5.981] (II) Initializing extension RECORD
[     5.981] (II) Initializing extension DPMS
[     5.982] (II) Initializing extension Present
[     5.982] (II) Initializing extension DRI3
[     5.982] (II) Initializing extension X-Resource
[     5.982] (II) Initializing extension XVideo
[     5.982] (II) Initializing extension XVideo-MotionCompensation
[     5.982] (II) Initializing extension GLX
[     5.987] (II) AIGLX: Loaded and initialized radeonsi
[     5.987] (II) GLX: Initialized DRI2 GL provider for screen 0
[     5.987] (II) Initializing extension XFree86-VidModeExtension
[     5.987] (II) Initializing extension XFree86-DGA
[     5.987] (II) Initializing extension XFree86-DRI
[     5.987] (II) Initializing extension DRI2
[     5.987] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[     5.989] (EE) AMDGPU(0): Failed to make import prime FD as pixmap: 22
[     6.027] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[     6.027] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[     6.027] (II) LoadModule: "libinput"
[     6.027] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.029] (II) Module libinput: vendor="X.Org Foundation"
[     6.029] 	compiled for 1.21.1.3, module version = 1.2.1
[     6.029] 	Module class: X.Org XInput Driver
[     6.029] 	ABI class: X.Org XInput driver, version 24.4
[     6.029] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[     6.029] (**) Asus Wireless Radio Control: always reports core events
[     6.029] (**) Option "Device" "/dev/input/event4"
[     6.034] (II) event4  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[     6.034] (II) event4  - Asus Wireless Radio Control: device is a keyboard
[     6.034] (II) event4  - Asus Wireless Radio Control: device removed
[     6.056] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5/event4"
[     6.056] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 6)
[     6.057] (II) event4  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[     6.057] (II) event4  - Asus Wireless Radio Control: device is a keyboard
[     6.057] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[     6.057] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.057] (II) Using input driver 'libinput' for 'Video Bus'
[     6.057] (**) Video Bus: always reports core events
[     6.057] (**) Option "Device" "/dev/input/event3"
[     6.058] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[     6.058] (II) event3  - Video Bus: device is a keyboard
[     6.058] (II) event3  - Video Bus: device removed
[     6.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/LNXVIDEO:00/input/input3/event3"
[     6.090] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.091] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[     6.091] (II) event3  - Video Bus: device is a keyboard
[     6.091] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     6.091] (II) No input driver specified, ignoring this device.
[     6.091] (II) This device may have been added with another device file.
[     6.092] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     6.092] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.092] (II) Using input driver 'libinput' for 'Power Button'
[     6.092] (**) Power Button: always reports core events
[     6.092] (**) Option "Device" "/dev/input/event1"
[     6.092] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.092] (II) event1  - Power Button: device is a keyboard
[     6.092] (II) event1  - Power Button: device removed
[     6.106] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     6.106] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     6.107] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.107] (II) event1  - Power Button: device is a keyboard
[     6.107] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     6.107] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.107] (II) Using input driver 'libinput' for 'Sleep Button'
[     6.107] (**) Sleep Button: always reports core events
[     6.107] (**) Option "Device" "/dev/input/event2"
[     6.108] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[     6.108] (II) event2  - Sleep Button: device is a keyboard
[     6.108] (II) event2  - Sleep Button: device removed
[     6.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[     6.124] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     6.125] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[     6.125] (II) event2  - Sleep Button: device is a keyboard
[     6.125] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[     6.125] (II) No input driver specified, ignoring this device.
[     6.125] (II) This device may have been added with another device file.
[     6.126] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[     6.126] (II) No input driver specified, ignoring this device.
[     6.126] (II) This device may have been added with another device file.
[     6.126] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event9)
[     6.126] (**) Logitech Gaming Mouse G502: Applying InputClass "libinput pointer catchall"
[     6.126] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502'
[     6.126] (**) Logitech Gaming Mouse G502: always reports core events
[     6.126] (**) Option "Device" "/dev/input/event9"
[     6.181] (II) event9  - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[     6.181] (II) event9  - Logitech Gaming Mouse G502: device set to 2400 DPI
[     6.181] (II) event9  - Logitech Gaming Mouse G502: device is a pointer
[     6.181] (II) event9  - Logitech Gaming Mouse G502: device removed
[     6.204] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.0/0003:046D:C332.0002/input/input10/event9"
[     6.204] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: MOUSE, id 10)
[     6.204] (**) Option "AccelerationScheme" "none"
[     6.204] (**) Logitech Gaming Mouse G502: (accel) selected scheme none/0
[     6.204] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
[     6.204] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
[     6.259] (II) event9  - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[     6.259] (II) event9  - Logitech Gaming Mouse G502: device set to 2400 DPI
[     6.259] (II) event9  - Logitech Gaming Mouse G502: device is a pointer
[     6.260] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/mouse0)
[     6.260] (II) No input driver specified, ignoring this device.
[     6.260] (II) This device may have been added with another device file.
[     6.260] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Keyboard (/dev/input/event10)
[     6.260] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.260] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard'
[     6.260] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events
[     6.260] (**) Option "Device" "/dev/input/event10"
[     6.261] (II) event10 - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[     6.261] (II) event10 - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[     6.261] (II) event10 - Logitech Gaming Mouse G502 Keyboard: device removed
[     6.280] (II) libinput: Logitech Gaming Mouse G502 Keyboard: needs a virtual subdevice
[     6.280] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.1/0003:046D:C332.0003/input/input11/event10"
[     6.280] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: MOUSE, id 11)
[     6.280] (**) Option "AccelerationScheme" "none"
[     6.280] (**) Logitech Gaming Mouse G502 Keyboard: (accel) selected scheme none/0
[     6.280] (**) Logitech Gaming Mouse G502 Keyboard: (accel) acceleration factor: 2.000
[     6.280] (**) Logitech Gaming Mouse G502 Keyboard: (accel) acceleration threshold: 4
[     6.281] (II) event10 - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[     6.281] (II) event10 - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[     6.282] (II) config/udev: Adding input device Asus Keyboard (/dev/input/event15)
[     6.282] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.282] (II) Using input driver 'libinput' for 'Asus Keyboard'
[     6.282] (**) Asus Keyboard: always reports core events
[     6.282] (**) Option "Device" "/dev/input/event15"
[     6.283] (II) event15 - Asus Keyboard: is tagged by udev as: Keyboard
[     6.283] (II) event15 - Asus Keyboard: device is a keyboard
[     6.284] (II) event15 - Asus Keyboard: device removed
[     6.296] (II) libinput: Asus Keyboard: needs a virtual subdevice
[     6.296] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-3/1-3:1.0/0003:0B05:1866.0005/input/input24/event15"
[     6.296] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: MOUSE, id 12)
[     6.296] (**) Option "AccelerationScheme" "none"
[     6.296] (**) Asus Keyboard: (accel) selected scheme none/0
[     6.296] (**) Asus Keyboard: (accel) acceleration factor: 2.000
[     6.296] (**) Asus Keyboard: (accel) acceleration threshold: 4
[     6.297] (II) event15 - Asus Keyboard: is tagged by udev as: Keyboard
[     6.297] (II) event15 - Asus Keyboard: device is a keyboard
[     6.298] (II) config/udev: Adding input device Kingston HyperX 7.1 Audio Consumer Control (/dev/input/event11)
[     6.298] (**) Kingston HyperX 7.1 Audio Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.298] (II) Using input driver 'libinput' for 'Kingston HyperX 7.1 Audio Consumer Control'
[     6.298] (**) Kingston HyperX 7.1 Audio Consumer Control: always reports core events
[     6.298] (**) Option "Device" "/dev/input/event11"
[     6.299] (II) event11 - Kingston HyperX 7.1 Audio Consumer Control: is tagged by udev as: Keyboard
[     6.299] (II) event11 - Kingston HyperX 7.1 Audio Consumer Control: device is a keyboard
[     6.300] (II) event11 - Kingston HyperX 7.1 Audio Consumer Control: device removed
[     6.322] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.4/usb3/3-1/3-1:1.3/0003:0951:16A4.0004/input/input16/event11"
[     6.322] (II) XINPUT: Adding extended input device "Kingston HyperX 7.1 Audio Consumer Control" (type: KEYBOARD, id 13)
[     6.323] (II) event11 - Kingston HyperX 7.1 Audio Consumer Control: is tagged by udev as: Keyboard
[     6.323] (II) event11 - Kingston HyperX 7.1 Audio Consumer Control: device is a keyboard
[     6.324] (II) config/udev: Adding input device Kingston HyperX 7.1 Audio (/dev/input/event13)
[     6.324] (**) Kingston HyperX 7.1 Audio: Applying InputClass "libinput keyboard catchall"
[     6.324] (II) Using input driver 'libinput' for 'Kingston HyperX 7.1 Audio'
[     6.324] (**) Kingston HyperX 7.1 Audio: always reports core events
[     6.324] (**) Option "Device" "/dev/input/event13"
[     6.325] (II) event13 - Kingston HyperX 7.1 Audio: is tagged by udev as: Keyboard
[     6.325] (II) event13 - Kingston HyperX 7.1 Audio: device is a keyboard
[     6.325] (II) event13 - Kingston HyperX 7.1 Audio: device removed
[     6.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.4/usb3/3-1/3-1:1.3/0003:0951:16A4.0004/input/input17/event13"
[     6.348] (II) XINPUT: Adding extended input device "Kingston HyperX 7.1 Audio" (type: KEYBOARD, id 14)
[     6.349] (II) event13 - Kingston HyperX 7.1 Audio: is tagged by udev as: Keyboard
[     6.349] (II) event13 - Kingston HyperX 7.1 Audio: device is a keyboard
[     6.350] (II) config/udev: Adding input device HD-Audio Generic Headset Mic (/dev/input/event16)
[     6.350] (II) No input driver specified, ignoring this device.
[     6.350] (II) This device may have been added with another device file.
[     6.350] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event17)
[     6.350] (II) No input driver specified, ignoring this device.
[     6.350] (II) This device may have been added with another device file.
[     6.350] (II) config/udev: Adding input device ASUE120A:00 04F3:319B Mouse (/dev/input/event6)
[     6.350] (**) ASUE120A:00 04F3:319B Mouse: Applying InputClass "libinput pointer catchall"
[     6.350] (II) Using input driver 'libinput' for 'ASUE120A:00 04F3:319B Mouse'
[     6.350] (**) ASUE120A:00 04F3:319B Mouse: always reports core events
[     6.350] (**) Option "Device" "/dev/input/event6"
[     6.351] (II) event6  - ASUE120A:00 04F3:319B Mouse: is tagged by udev as: Mouse Pointingstick
[     6.351] (II) event6  - ASUE120A:00 04F3:319B Mouse: device is a pointer
[     6.352] (II) event6  - ASUE120A:00 04F3:319B Mouse: device removed
[     6.386] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:00/i2c-0/i2c-ASUE120A:00/0018:04F3:319B.0001/input/input14/event6"
[     6.386] (II) XINPUT: Adding extended input device "ASUE120A:00 04F3:319B Mouse" (type: MOUSE, id 15)
[     6.386] (**) Option "AccelerationScheme" "none"
[     6.386] (**) ASUE120A:00 04F3:319B Mouse: (accel) selected scheme none/0
[     6.386] (**) ASUE120A:00 04F3:319B Mouse: (accel) acceleration factor: 2.000
[     6.386] (**) ASUE120A:00 04F3:319B Mouse: (accel) acceleration threshold: 4
[     6.387] (II) event6  - ASUE120A:00 04F3:319B Mouse: is tagged by udev as: Mouse Pointingstick
[     6.387] (II) event6  - ASUE120A:00 04F3:319B Mouse: device is a pointer
[     6.388] (II) config/udev: Adding input device ASUE120A:00 04F3:319B Mouse (/dev/input/mouse1)
[     6.388] (II) No input driver specified, ignoring this device.
[     6.388] (II) This device may have been added with another device file.
[     6.388] (II) config/udev: Adding input device ASUE120A:00 04F3:319B Touchpad (/dev/input/event7)
[     6.388] (**) ASUE120A:00 04F3:319B Touchpad: Applying InputClass "libinput touchpad catchall"
[     6.388] (II) Using input driver 'libinput' for 'ASUE120A:00 04F3:319B Touchpad'
[     6.388] (**) ASUE120A:00 04F3:319B Touchpad: always reports core events
[     6.388] (**) Option "Device" "/dev/input/event7"
[     6.389] (II) event7  - ASUE120A:00 04F3:319B Touchpad: is tagged by udev as: Touchpad
[     6.390] (II) event7  - ASUE120A:00 04F3:319B Touchpad: device is a touchpad
[     6.390] (II) event7  - ASUE120A:00 04F3:319B Touchpad: device removed
[     6.428] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:00/i2c-0/i2c-ASUE120A:00/0018:04F3:319B.0001/input/input15/event7"
[     6.428] (II) XINPUT: Adding extended input device "ASUE120A:00 04F3:319B Touchpad" (type: TOUCHPAD, id 16)
[     6.429] (**) Option "AccelerationScheme" "none"
[     6.429] (**) ASUE120A:00 04F3:319B Touchpad: (accel) selected scheme none/0
[     6.429] (**) ASUE120A:00 04F3:319B Touchpad: (accel) acceleration factor: 2.000
[     6.429] (**) ASUE120A:00 04F3:319B Touchpad: (accel) acceleration threshold: 4
[     6.430] (II) event7  - ASUE120A:00 04F3:319B Touchpad: is tagged by udev as: Touchpad
[     6.431] (II) event7  - ASUE120A:00 04F3:319B Touchpad: device is a touchpad
[     6.431] (II) config/udev: Adding input device ASUE120A:00 04F3:319B Touchpad (/dev/input/mouse2)
[     6.431] (II) No input driver specified, ignoring this device.
[     6.431] (II) This device may have been added with another device file.
[     6.432] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[     6.432] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     6.432] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[     6.432] (**) Asus WMI hotkeys: always reports core events
[     6.432] (**) Option "Device" "/dev/input/event8"
[     6.432] (II) event8  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[     6.432] (II) event8  - Asus WMI hotkeys: device is a keyboard
[     6.432] (II) event8  - Asus WMI hotkeys: device removed
[     6.458] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input9/event8"
[     6.458] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 17)
[     6.459] (II) event8  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[     6.459] (II) event8  - Asus WMI hotkeys: device is a keyboard
[     6.459] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     6.459] (II) No input driver specified, ignoring this device.
[     6.459] (II) This device may have been added with another device file.
[     6.463] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.463] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard'
[     6.463] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events
[     6.463] (**) Option "Device" "/dev/input/event10"
[     6.463] (II) libinput: Logitech Gaming Mouse G502 Keyboard: is a virtual subdevice
[     6.463] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.1/0003:046D:C332.0003/input/input11/event10"
[     6.463] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: KEYBOARD, id 18)
[     6.463] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.463] (II) Using input driver 'libinput' for 'Asus Keyboard'
[     6.463] (**) Asus Keyboard: always reports core events
[     6.463] (**) Option "Device" "/dev/input/event15"
[     6.463] (II) libinput: Asus Keyboard: is a virtual subdevice
[     6.463] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-3/1-3:1.0/0003:0B05:1866.0005/input/input24/event15"
[     6.463] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: KEYBOARD, id 19)
[    10.080] (II) AMDGPU(0): EDID vendor "TMX", prod id 5472
[    10.080] (II) AMDGPU(0): Using EDID range info for horizontal sync
[    10.080] (II) AMDGPU(0): Using EDID range info for vertical refresh
[    10.080] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    10.080] (II) AMDGPU(0): Modeline "1920x1080"x0.0  133.32  1920 1963 1995 2000  1080 1103 1108 1111 -hsync -vsync (66.7 kHz eP)
[    10.082] (II) AMDGPU(0): EDID vendor "TMX", prod id 5472
[    10.082] (II) AMDGPU(0): Using hsync ranges from config file
[    10.082] (II) AMDGPU(0): Using vrefresh ranges from config file
[    10.082] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    10.082] (II) AMDGPU(0): Modeline "1920x1080"x0.0  133.32  1920 1963 1995 2000  1080 1103 1108 1111 -hsync -vsync (66.7 kHz eP)
[    10.084] (II) AMDGPU(0): EDID vendor "TMX", prod id 5472
[    10.084] (II) AMDGPU(0): Using hsync ranges from config file
[    10.084] (II) AMDGPU(0): Using vrefresh ranges from config file
[    10.084] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    10.084] (II) AMDGPU(0): Modeline "1920x1080"x0.0  133.32  1920 1963 1995 2000  1080 1103 1108 1111 -hsync -vsync (66.7 kHz eP)
[    10.086] (II) AMDGPU(0): EDID vendor "TMX", prod id 5472
[    10.086] (II) AMDGPU(0): Using hsync ranges from config file
[    10.086] (II) AMDGPU(0): Using vrefresh ranges from config file
[    10.086] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    10.086] (II) AMDGPU(0): Modeline "1920x1080"x0.0  133.32  1920 1963 1995 2000  1080 1103 1108 1111 -hsync -vsync (66.7 kHz eP)
[    91.017] (EE) event15 - Asus Keyboard: client bug: event processing lagging behind by 23ms, your system is too slow
[   108.295] (II) AMDGPU(0): EDID vendor "TMX", prod id 5472
[   108.295] (II) AMDGPU(0): Using hsync ranges from config file
[   108.295] (II) AMDGPU(0): Using vrefresh ranges from config file
[   108.295] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   108.295] (II) AMDGPU(0): Modeline "1920x1080"x0.0  133.32  1920 1963 1995 2000  1080 1103 1108 1111 -hsync -vsync (66.7 kHz eP)
[   156.005] (EE) event15 - Asus Keyboard: client bug: event processing lagging behind by 22ms, your system is too slow
[   236.774] (II) AMDGPU(0): EDID vendor "TMX", prod id 5472
[   236.774] (II) AMDGPU(0): Using hsync ranges from config file
[   236.774] (II) AMDGPU(0): Using vrefresh ranges from config file
[   236.774] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   236.774] (II) AMDGPU(0): Modeline "1920x1080"x0.0  133.32  1920 1963 1995 2000  1080 1103 1108 1111 -hsync -vsync (66.7 kHz eP)

Thank you!

Offline

#4 2022-05-11 15:16:56

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

Also if it helps, if I run 

supergfxctl -g

The response is 

Graphics mode change error.
Please check `journalctl -b -u supergfxd`, and `systemctl status supergfxd`
Unknown object '/org/supergfxctl/Gfx'

Offline

#5 2022-05-11 19:16:12

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,251

Re: Cursor Dissappeared in X11

You're running on the Cezanne chip and this is where the internal display is wired.
I'm not sure there's something on EDID for output DisplayPort-1-0 so the Navi 22 looks like dead weight.
I'm likewise unsure that supergfxctl supports that configuration "A utility for Linux graphics switching on Intel/AMD iGPU + nVidia dGPU laptops" - why do you use it itfp? Does the error remain w/o it?
Are you offloading any of the troublesome clients to the Navi chip?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#6 2022-05-11 19:47:35

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

I remember reading a while back that this laptop doesn't work on linux with the DisplayPort (it's a Strix G15 Advantage Edition) but unfortunately I can't find a link. I've uninstalled supergfxctl and the issue is worse, my cursor only shows in terminals and when it is held over text boxes in firefox. I'm pretty sure the Navi GPU is working as I can play games at the usual frame rate in Wine (I haven't got any native games to try) but the cursor also doesn't show in those games. I've tried launching some of the offending apps (GIMP being one of them) with 

DRI_PRIME=1

but the issue is still happening. I also tried 

xrandr --setprovideroffloadsink 1 0

but that also didn't work.

Last edited by tripleab (2022-05-11 19:48:10)

Offline

#7 2022-05-11 19:59:07

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,251

Re: Cursor Dissappeared in X11

https://bbs.archlinux.org/viewtopic.php … 1#p2024581

myself wrote:

W/ xf86-video-amdgpu you could try 'Option "SWcursor" "True"'

You could also test the behavior of the modesetting driver.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2022-05-11 20:10:39

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

Setting SWcursor to true just made the cursor disappear in everything. Sorry for the stupid question, but how can I test the modesetting driver? Do I just need to add amdgpu to modules in mkinitcpio.conf? Also, I've just installed the LTS kernel so I'll try booting into that first to see if it fixes it.

Offline

#9 2022-05-11 20:13:18

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

I've tried the LTS kernel but it didn't work. I've also tried recompiling mesa-git a few times but it hasn't worked. One thing I've noticed with that is that there's been quite a few warnings during compilation, and there also were while compiling my kernel (tkg) since upgrading to the latest version of gcc

Offline

#10 2022-05-11 20:23:47

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,251

Re: Cursor Dissappeared in X11

how can I test the modesetting driver?

Just remove xf86-video-amdgpu (and any config file referencing it in /{usr/share,etc}/X11/xorg.conf* )

About mesa-git: what about the prebuilt mesa in the repos?

I remember reading a while back that this laptop doesn't work on linux with the DisplayPort
…
Setting SWcursor to true just made the cursor disappear in everything.

Is there any external display used/attached?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2022-05-11 20:27:34

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

There is no external display attached. So uninstall xf86-video-amdgpu and delete /etc/X11/xorg.conf.d/20-amdgpu.conf?

Offline

#12 2022-05-11 20:34:20

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,251

Re: Cursor Dissappeared in X11

grep -r amdgpu /{usr/share,etc}/X11/xorg.conf*

but basically yes.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2022-05-11 20:41:13

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

I removed just /etc/X11/xorg.conf.d/20-amdgpu.conf before realizing about the others and rebooted, Xorg did start but the issue was worse, and there were also some artifacts on the screen. I'm going to try running in wayland and seeing if the issue is still there

Offline

#14 2022-05-11 20:44:44

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

Sway didn't seem to suffer from that particular issue, I'll remove all of the files with amdgpu and try again

Offline

#15 2022-05-11 20:49:51

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

Tried that, everything is roughly the same, but there is a black shape at the top of my display when on the home screen, but any programs are rendering over the top of it.

Offline

#16 2022-05-11 20:55:58

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

My cursor does show now in WINE, I'll try the prebuilt mesa-git. Just checking, to do that I'll just need to uninstall mesa-git and lib32-mesa-git, add the repo, and then install, I'll also need to install vulkan-radeon-git and lib32-vulkan-radeon-git right?
Everything is pretty much fixed now, the only things where the cursor is showing is IntelliJ, GIMP, krita, the lutris launcher and on my desktop background. In those apps, the cursor does sometimes show when scrolling over menu bars or popups

Last edited by tripleab (2022-05-11 20:58:27)

Offline

#17 2022-05-11 21:05:52

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

So I tried installing the drivers from the repo, but just received this error 

 error: failed retrieving file 'lib32-llvm-libs-git-15.0.0_r423279.431b23d20d5c-1-x86_64.pkg.tar.zst.sig' from pkgbuild.com : The requested URL returned error: 404
error: failed retrieving file 'llvm-libs-git-15.0.0_r423274.017abbb25861-1-x86_64.pkg.tar.zst.sig' from pkgbuild.com : The requested URL returned error: 404
error: failed retrieving file 'mesa-git-1:22.2.0_devel.153711.e4ad1b5b336-1-x86_64.pkg.tar.zst.sig' from pkgbuild.com : The requested URL returned error: 404
warning: too many errors from pkgbuild.com, skipping for the remainder of this transaction
error: failed retrieving file 'lib32-mesa-git-1:22.2.0_devel.153711.e4ad1b5b336-1-x86_64.pkg.tar.zst.sig' from pkgbuild.com : The requested URL returned error: 404
error: failed retrieving file 'lib32-vulkan-radeon-git-1:22.2.0_devel.153711.e4ad1b5b336-1-x86_64.pkg.tar.zst.sig' from pkgbuild.com : The requested URL returned error: 404
warning: failed to retrieve some files
error: failed to commit transaction (failed to retrieve some files)
Errors occurred, no packages were upgraded

Offline

#18 2022-05-11 21:09:28

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,251

Re: Cursor Dissappeared in X11

404 means you didn't update the database and try to fetch dated problems.

Everything is pretty much fixed now

Does that mean it works w/ https://archlinux.org/packages/extra/x86_64/mesa/ ?
Why are you trying to use mesa-git?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#19 2022-05-11 21:11:10

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

No it works mostly with mesa-git from the aur. I'm just using it because I've heard that it can give better performance in games tbh. I know it's stupid but it's worked so far. I've updated the database with pacman -Syyuu but it still doesn't work

Last edited by tripleab (2022-05-11 21:12:06)

Offline

#20 2022-05-11 21:21:34

tripleab
Member
Registered: 2022-05-10
Posts: 14

Re: Cursor Dissappeared in X11

I've also tried updating the mirrorlist but it still doesn't work

Offline

#21 2022-05-12 05:30:27

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,251

Re: Cursor Dissappeared in X11

Seems a problem w/ pkgbuild.com then, *shrug*.

I've heard that it can give better performance

Aha. "heard". I've heard that we're all controlled by lizard-people. Was on the internet.
Try the regular mesa package so we can at least isolate the problem.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#22 2022-07-01 18:36:56

codynw42
Member
From: ohio
Registered: 2022-06-30
Posts: 6

Re: Cursor Dissappeared in X11

im having this issue too. Installed arch on virtual box on my Latitude/Vostro 3590. I do have an external display hooked up also. First time i logged on after install the screen was black, then i install xf86-intel-video driver i think or something similar. And that fixed the black screen issue but then my mouse isnt visible. It still works and i can click on stuff but its just not visible. Also had weird artifacting when i used dolphin and terminal. havent found a fix yet. the only desktop that seems to show cursor is regular gnome. all the others wont. gnome stil has weird artifact issues too tho. would prefer to get kde x11 going.

edit: also i do remember doing systemctl enable sddm thing after installing all the kde stuff and rebooting so idk.

Last edited by codynw42 (2022-07-01 18:40:18)

Hello im new here and have been in the computer world for a couple years now teaching myself everything i can because i want to do something in the computer science field for the rest of my life. I recently decided it would be good for me to learn vanilla arch so I installed it ( the old school way smile ) and obtained my badge of Arch honor lol

Offline

#23 2022-07-01 19:08:49

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,251

Re: Cursor Dissappeared in X11

Output of "glxinfo -B" and "lspci"?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#24 2022-07-01 23:31:42

codynw42
Member
From: ohio
Registered: 2022-06-30
Posts: 6

Re: Cursor Dissappeared in X11

seth wrote:

Output of "glxinfo -B" and "lspci"?

If i log into 'GNOME' which is the only desktop that shows mouse, it will give seemingly normal results. If i log onto KDE x11 glxinfo will just say "Can not open display" or something similar.  both lspcis seem to be the same. Give me a moment and ill edit them into here. Bidirectional clipboard isnt working for my right now so i have to install package to copy/paste the results.

Hello im new here and have been in the computer world for a couple years now teaching myself everything i can because i want to do something in the computer science field for the rest of my life. I recently decided it would be good for me to learn vanilla arch so I installed it ( the old school way smile ) and obtained my badge of Arch honor lol

Offline

#25 2022-07-02 06:07:11

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,251

Re: Cursor Dissappeared in X11

If i log onto KDE x11 glxinfo will just say "Can not open display" or something similar.

You're running KDE on wayland. Try KDE on X11.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1 2

Board footer

Powered by FluxBB