Arch Linux

tsukimomo

Member

Registered: 2022-05-21

Posts: 2

Cannot wakeup from sleep/hibernate

I am using a PC with Motherboard GIGABYTE B660M DS3H AX D4. I understand from the Arch wiki that GIGABYTE B550M has had issues.
I have replicated the following issue with my existing Arch setup with KDE Plasma as my DE, and on a fresh installation of Arch (no nouveau/NVIDIA drivers)(this should therefore differ from this issue) in a different partition on the same SSD.

Suspend is successful, as shown by logs in journalctl, with only the LED lights to the RAM cards left running. Shaking the mouse/pressing the keyboard turns the whole PC back on (Fan LEDS turn on, fan spin, NVIDIA GPU lights turn on). Mouse, keyboard and screen however do not respond/turn on respectively. journalctl shows no indication of being woken up.
Hibernate turns the monitor off, but fan spin and gpu etc are still on, keyboard shake/mouse shake does not break out of hibernate. Likewise, journalctl shows no logs of being woken.
Both scenarios require a forced shutdown.

My first installation of Arch had installed NVIDIA 510.68, but I did not test suspend/hibernate until after 515.

Following the B550 section on the wiki, I get

$ cat /proc/acpi/wakeup
Device	S-state	 Status   Sysfs node
PEG1	 S4	*enabled   pci:0000:00:01.0
PEGP	 S4	*disabled  pci:0000:01:00.0
PEG2	 S4	*disabled
PEGP	 S4	*disabled
PEG3	 S4	*disabled
PEGP	 S4	*disabled
PEG0	 S4	*enabled   pci:0000:00:06.0
PEGP	 S4	*disabled  pci:0000:02:00.0
PS2K	 S3	*disabled
PS2M	 S3	*disabled
RP09	 S4	*disabled
PXSX	 S4	*disabled
RP10	 S4	*disabled
PXSX	 S4	*disabled
RP11	 S4	*disabled
PXSX	 S4	*disabled
RP12	 S4	*disabled
PXSX	 S4	*disabled
RP13	 S4	*disabled
PXSX	 S4	*disabled
RP14	 S4	*disabled
PXSX	 S4	*disabled
RP15	 S4	*disabled
PXSX	 S4	*disabled
RP16	 S4	*disabled
PXSX	 S4	*disabled
RP01	 S4	*disabled  pci:0000:00:1c.0
PXSX	 S4	*disabled
RP02	 S4	*disabled
PXSX	 S4	*disabled
RP03	 S4	*enabled   pci:0000:00:1c.2
PXSX	 S4	*disabled
RP04	 S4	*disabled
PXSX	 S4	*disabled
RP05	 S4	*disabled
PXSX	 S4	*disabled
RP06	 S4	*disabled
PXSX	 S4	*disabled
RP07	 S4	*disabled
PXSX	 S4	*disabled
RP08	 S4	*disabled
PXSX	 S4	*disabled
RP17	 S4	*disabled
PXSX	 S4	*disabled
RP18	 S4	*disabled
PXSX	 S4	*disabled
RP19	 S4	*disabled
PXSX	 S4	*disabled
RP20	 S4	*disabled
PXSX	 S4	*disabled
RP21	 S4	*disabled
PXSX	 S4	*disabled
RP22	 S4	*disabled
PXSX	 S4	*disabled
RP23	 S4	*disabled
PXSX	 S4	*disabled
RP24	 S4	*disabled
PXSX	 S4	*disabled
RP25	 S4	*enabled   pci:0000:00:1a.0
PXSX	 S4	*disabled  pci:0000:03:00.0
RP26	 S4	*disabled
PXSX	 S4	*disabled
RP27	 S4	*disabled
PXSX	 S4	*disabled
RP28	 S4	*disabled
PXSX	 S4	*disabled
XHCI	 S4	*enabled   pci:0000:00:14.0
XDCI	 S4	*disabled
HDAS	 S4	*disabled  pci:0000:00:1f.3
CNVW	 S4	*disabled  pci:0000:00:14.3
AWAC	 S4	*enabled   platform:ACPI000E:00

Any help is appreciated.

tsukimomo

Member

Registered: 2022-05-21

Posts: 2

Re: Cannot wakeup from sleep/hibernate

I have since successfully solved the hibernate (S4) not powering down the fans etc by following the wiki here, along with changing some mkinitpcio hooks and ensuring my GRUB config has `resume=UUID=...` tags.

Currently, waking up from S3 suspend turns the computer on, but journalctl still registers nothing.