You are not logged in.

Pages: 1 2

#1 2022-07-16 05:08:09

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

[Solved] No display signal after setting Xorg to use NVIDIA GPU

The machine I'm trying to setup has Intel HD graphics 2500 along with NVIDIA GeForce GT 620 OEM and an LCD connected through VGA. Without a configuration file Xorg is able to run using Intel graphics. After installing nvidia-390xx packages, following instructions to use NVIDIA graphics only and rebooting, when Xorg tries to run, the whole display gets turned off, in other words no signal is sent through the VGA port, though lock keys seem to still respond. Switching to other virtual terminals using Ctrl+Alt+Fn brings back video with the usual text mode interface.

Whole contents of Xorg.0.log:

[    13.831] (--) Log file renamed from "/var/log/Xorg.pid-421.log" to "/var/log/Xorg.0.log"
[    13.842] 
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[    13.842] Current Operating System: Linux QuangArch 5.18.11-arch1-1 #1 SMP PREEMPT_DYNAMIC Tue, 12 Jul 2022 15:40:51 +0000 x86_64
[    13.842] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=001a5981-a8f8-4183-9a62-6b1cc88f3254 rw loglevel=3 quiet
[    13.842]  
[    13.842] Current version of pixman: 0.40.0
[    13.842] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    13.842] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.842] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 16 11:51:41 2022
[    13.894] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.894] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    13.919] (==) No Layout section.  Using the first Screen section.
[    13.919] (==) No screen section available. Using defaults.
[    13.919] (**) |-->Screen "Default Screen Section" (0)
[    13.919] (**) |   |-->Monitor "<default monitor>"
[    13.919] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    13.919] (==) Automatically adding devices
[    13.919] (==) Automatically enabling devices
[    13.919] (==) Automatically adding GPU devices
[    13.919] (==) Automatically binding GPU devices
[    13.919] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    13.920] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    13.920] 	Entry deleted from font path.
[    13.932] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[    13.932] 	Entry deleted from font path.
[    13.932] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[    13.932] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    13.932] 	Entry deleted from font path.
[    13.932] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    13.932] 	Entry deleted from font path.
[    13.932] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    13.932] 	Entry deleted from font path.
[    13.932] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    13.932] 	Entry deleted from font path.
[    13.932] (==) FontPath set to:
	
[    13.932] (==) ModulePath set to "/usr/lib/xorg/modules"
[    13.932] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    13.932] (II) Module ABI versions:
[    13.932] 	X.Org ANSI C Emulation: 0.4
[    13.932] 	X.Org Video Driver: 25.2
[    13.932] 	X.Org XInput driver : 24.4
[    13.932] 	X.Org Server Extension : 10.0
[    13.933] (++) using VT number 1

[    13.933] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    13.934] (II) xfree86: Adding drm device (/dev/dri/card0)
[    13.934] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    13.935] (II) xfree86: Adding drm device (/dev/dri/card1)
[    13.935] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[    13.943] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    13.943] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    13.943] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[    13.945] (--) PCI: (0@0:2:0) 8086:0152:1028:0574 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    13.945] (--) PCI:*(1@0:0:0) 10de:1049:10de:0977 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    13.945] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    13.945] (II) LoadModule: "glx"
[    13.956] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[    14.401] (II) Module glx: vendor="NVIDIA Corporation"
[    14.401] 	compiled for 4.0.2, module version = 1.0.0
[    14.401] 	Module class: X.Org Server Extension
[    14.408] (II) NVIDIA GLX Module  390.151  Wed Apr 20 17:46:44 UTC 2022
[    14.419] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    14.419] 	loading driver: nvidia
[    14.419] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    14.419] 	loading driver: nvidia
[    14.419] (II) Applying OutputClass "intel" to /dev/dri/card1
[    14.419] 	loading driver: modesetting
[    14.419] (==) Matched nvidia as autoconfigured driver 0
[    14.419] (==) Matched nouveau as autoconfigured driver 1
[    14.419] (==) Matched nv as autoconfigured driver 2
[    14.419] (==) Matched modesetting as autoconfigured driver 3
[    14.419] (==) Matched intel as autoconfigured driver 4
[    14.419] (==) Matched fbdev as autoconfigured driver 5
[    14.419] (==) Matched vesa as autoconfigured driver 6
[    14.419] (==) Assigned the driver to the xf86ConfigLayout
[    14.419] (II) LoadModule: "nvidia"
[    14.433] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    14.482] (II) Module nvidia: vendor="NVIDIA Corporation"
[    14.482] 	compiled for 4.0.2, module version = 1.0.0
[    14.482] 	Module class: X.Org Video Driver
[    14.485] (II) LoadModule: "nouveau"
[    14.486] (WW) Warning, couldn't open module nouveau
[    14.486] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    14.486] (II) LoadModule: "nv"
[    14.487] (WW) Warning, couldn't open module nv
[    14.487] (EE) Failed to load module "nv" (module does not exist, 0)
[    14.487] (II) LoadModule: "modesetting"
[    14.487] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    14.507] (II) Module modesetting: vendor="X.Org Foundation"
[    14.507] 	compiled for 1.21.1.4, module version = 1.21.1
[    14.507] 	Module class: X.Org Video Driver
[    14.507] 	ABI class: X.Org Video Driver, version 25.2
[    14.507] (II) LoadModule: "intel"
[    14.507] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    14.536] (II) Module intel: vendor="X.Org Foundation"
[    14.536] 	compiled for 1.21.1.1, module version = 2.99.917
[    14.536] 	Module class: X.Org Video Driver
[    14.536] 	ABI class: X.Org Video Driver, version 25.2
[    14.537] (II) LoadModule: "fbdev"
[    14.537] (WW) Warning, couldn't open module fbdev
[    14.537] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    14.537] (II) LoadModule: "vesa"
[    14.538] (WW) Warning, couldn't open module vesa
[    14.538] (EE) Failed to load module "vesa" (module does not exist, 0)
[    14.538] (II) NVIDIA dlloader X Driver  390.151  Wed Apr 20 17:48:53 UTC 2022
[    14.538] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    14.539] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    14.539] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    14.539] (II) intel: Driver for Intel(R) HD Graphics
[    14.539] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    14.539] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    14.556] (II) Loading sub module "fb"
[    14.556] (II) LoadModule: "fb"
[    14.556] (II) Module "fb" already built-in
[    14.556] (II) Loading sub module "wfb"
[    14.556] (II) LoadModule: "wfb"
[    14.556] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    14.567] (II) Module wfb: vendor="X.Org Foundation"
[    14.567] 	compiled for 1.21.1.4, module version = 1.0.0
[    14.567] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    14.567] (II) Loading sub module "ramdac"
[    14.567] (II) LoadModule: "ramdac"
[    14.567] (II) Module "ramdac" already built-in
[    14.574] (WW) Falling back to old probe method for modesetting
[    14.591] (II) modeset(G0): using drv /dev/dri/card1
[    14.591] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    14.591] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    14.591] (==) NVIDIA(0): RGB weight 888
[    14.591] (==) NVIDIA(0): Default visual is TrueColor
[    14.591] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    14.597] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    14.597] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    14.597] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    14.597] (**) NVIDIA(0): Enabling 2D acceleration
[    15.563] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    15.563] (--) NVIDIA(0):     CRT-0
[    15.563] (--) NVIDIA(0):     DFP-0
[    15.563] (--) NVIDIA(0):     DFP-1
[    15.575] (II) NVIDIA(0): NVIDIA GPU GeForce GT 620 (GF119) at PCI:1:0:0 (GPU-0)
[    15.575] (--) NVIDIA(0): Memory: 1048576 kBytes
[    15.575] (--) NVIDIA(0): VideoBIOS: 75.19.61.00.10
[    15.575] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    15.578] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    15.578] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    15.578] (--) NVIDIA(GPU-0): 
[    15.580] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    15.580] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    15.580] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    15.580] (--) NVIDIA(GPU-0): 
[    15.580] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    15.580] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    15.580] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    15.580] (--) NVIDIA(GPU-0): 
[    15.580] (==) NVIDIA(0): 
[    15.580] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    15.580] (==) NVIDIA(0):     will be used as the requested mode.
[    15.580] (==) NVIDIA(0): 
[    15.580] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[    15.580] (--) NVIDIA(0):     AllowEmptyInitialConfiguration is enabled
[    15.580] (II) NVIDIA(0): Validated MetaModes:
[    15.580] (II) NVIDIA(0):     "NULL"
[    15.580] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    15.580] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[    15.580] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    15.581] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    15.581] (==) modeset(G0): RGB weight 888
[    15.581] (==) modeset(G0): Default visual is TrueColor
[    15.581] (II) Loading sub module "glamoregl"
[    15.581] (II) LoadModule: "glamoregl"
[    15.581] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    15.603] (II) Module glamoregl: vendor="X.Org Foundation"
[    15.603] 	compiled for 1.21.1.4, module version = 1.0.1
[    15.603] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.165] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 2500 (IVB GT1)
[    17.165] (II) modeset(G0): glamor initialized
[    17.179] (II) modeset(G0): Output VGA-1-1 has no monitor section
[    17.180] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[    17.180] (II) modeset(G0): Output DP-1-1 has no monitor section
[    17.194] (II) modeset(G0): EDID for output VGA-1-1
[    17.194] (II) modeset(G0): Manufacturer: ACR  Model: 334  Serial#: 1646321149
[    17.194] (II) modeset(G0): Year: 2016  Week: 22
[    17.194] (II) modeset(G0): EDID Version: 1.3
[    17.194] (II) modeset(G0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    17.194] (II) modeset(G0): Sync:  Separate
[    17.194] (II) modeset(G0): Max Image Size [cm]: horiz.: 43  vert.: 24
[    17.194] (II) modeset(G0): Gamma: 2.20
[    17.194] (II) modeset(G0): DPMS capabilities: StandBy Suspend; RGB/Color Display
[    17.194] (II) modeset(G0): First detailed timing is preferred mode
[    17.194] (II) modeset(G0): redX: 0.641 redY: 0.338   greenX: 0.315 greenY: 0.629
[    17.194] (II) modeset(G0): blueX: 0.159 blueY: 0.059   whiteX: 0.313 whiteY: 0.329
[    17.194] (II) modeset(G0): Supported established timings:
[    17.194] (II) modeset(G0): 720x400@70Hz
[    17.194] (II) modeset(G0): 640x480@60Hz
[    17.194] (II) modeset(G0): 640x480@67Hz
[    17.194] (II) modeset(G0): 640x480@72Hz
[    17.194] (II) modeset(G0): 640x480@75Hz
[    17.194] (II) modeset(G0): 800x600@56Hz
[    17.194] (II) modeset(G0): 800x600@60Hz
[    17.194] (II) modeset(G0): 800x600@72Hz
[    17.194] (II) modeset(G0): 800x600@75Hz
[    17.194] (II) modeset(G0): 832x624@75Hz
[    17.194] (II) modeset(G0): 1024x768@60Hz
[    17.194] (II) modeset(G0): 1024x768@70Hz
[    17.194] (II) modeset(G0): 1024x768@75Hz
[    17.194] (II) modeset(G0): 1280x1024@75Hz
[    17.194] (II) modeset(G0): 1152x864@75Hz
[    17.194] (II) modeset(G0): Manufacturer's mask: 0
[    17.194] (II) modeset(G0): Supported standard timings:
[    17.194] (II) modeset(G0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    17.194] (II) modeset(G0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    17.194] (II) modeset(G0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    17.194] (II) modeset(G0): Supported detailed timing:
[    17.194] (II) modeset(G0): clock: 108.0 MHz   Image Size:  432 x 240 mm
[    17.194] (II) modeset(G0): h_active: 1600  h_sync: 1624  h_sync_end 1704 h_blank_end 1800 h_border: 0
[    17.194] (II) modeset(G0): v_active: 900  v_sync: 901  v_sync_end 904 v_blanking: 1000 v_border: 0
[    17.194] (II) modeset(G0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[    17.194] (II) modeset(G0): Monitor name: V206HQL
[    17.194] (II) modeset(G0): Serial No: LY6SS0078501
[    17.194] (II) modeset(G0): EDID (in hex):
[    17.194] (II) modeset(G0): 	00ffffffffffff0004723403fddd2062
[    17.194] (II) modeset(G0): 	161a0103682b1878ca2cc5a45650a128
[    17.194] (II) modeset(G0): 	0f5054bfef80714f81c0810001010101
[    17.194] (II) modeset(G0): 	010101010101302a40c8608464301850
[    17.194] (II) modeset(G0): 	1300b0f01000001e000000fd00384c1f
[    17.194] (II) modeset(G0): 	5311000a202020202020000000fc0056
[    17.194] (II) modeset(G0): 	32303648514c0a2020202020000000ff
[    17.194] (II) modeset(G0): 	004c59365353303037383530310a0012
[    17.194] (II) modeset(G0): Printing probed modes for output VGA-1-1
[    17.194] (II) modeset(G0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz eP)
[    17.194] (II) modeset(G0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    17.195] (II) modeset(G0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    17.195] (II) modeset(G0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    17.195] (II) modeset(G0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    17.195] (II) modeset(G0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    17.195] (II) modeset(G0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    17.195] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    17.195] (II) modeset(G0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    17.195] (II) modeset(G0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    17.195] (II) modeset(G0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    17.195] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    17.195] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    17.195] (II) modeset(G0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    17.195] (II) modeset(G0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    17.195] (II) modeset(G0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    17.195] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    17.195] (II) modeset(G0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    17.196] (II) modeset(G0): EDID for output HDMI-1-1
[    17.196] (II) modeset(G0): EDID for output DP-1-1
[    17.196] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    17.196] (==) modeset(G0): DPI set to (96, 96)
[    17.196] (II) Loading sub module "fb"
[    17.196] (II) LoadModule: "fb"
[    17.196] (II) Module "fb" already built-in
[    17.196] (II) UnloadModule: "intel"
[    17.196] (II) Unloading intel
[    17.197] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[    17.197] (II) NVIDIA:     access.
[    17.199] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    17.199] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    17.199] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    17.199] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    17.199] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    17.199] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    17.199] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    17.199] (II) NVIDIA(0):     Config Options in the README.
[    17.224] (II) NVIDIA(0): Setting mode "NULL"
[    17.259] (==) NVIDIA(0): Disabling shared memory pixmaps
[    17.259] (==) NVIDIA(0): Backing store enabled
[    17.259] (==) NVIDIA(0): Silken mouse enabled
[    17.259] (==) NVIDIA(0): DPMS enabled
[    17.272] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[    17.273] (II) Loading sub module "dri2"
[    17.273] (II) LoadModule: "dri2"
[    17.273] (II) Module "dri2" already built-in
[    17.273] (II) NVIDIA(0): [DRI2] Setup complete
[    17.273] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    17.516] (==) modeset(G0): Backing store enabled
[    17.516] (==) modeset(G0): Silken mouse enabled
[    17.524] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[    17.524] (==) modeset(G0): DPMS enabled
[    17.524] (II) modeset(G0): [DRI2] Setup complete
[    17.524] (II) modeset(G0): [DRI2]   DRI driver: crocus
[    17.524] (II) modeset(G0): [DRI2]   VDPAU driver: va_gl
[    17.524] (II) modeset(G0): Disable reverse prime offload mode for i915.
[    17.524] (II) Initializing extension Generic Event Extension
[    17.525] (II) Initializing extension SHAPE
[    17.525] (II) Initializing extension MIT-SHM
[    17.525] (II) Initializing extension XInputExtension
[    17.525] (II) Initializing extension XTEST
[    17.525] (II) Initializing extension BIG-REQUESTS
[    17.525] (II) Initializing extension SYNC
[    17.525] (II) Initializing extension XKEYBOARD
[    17.525] (II) Initializing extension XC-MISC
[    17.525] (II) Initializing extension SECURITY
[    17.526] (II) Initializing extension XFIXES
[    17.526] (II) Initializing extension RENDER
[    17.526] (II) Initializing extension RANDR
[    17.526] (II) Initializing extension COMPOSITE
[    17.526] (II) Initializing extension DAMAGE
[    17.526] (II) Initializing extension MIT-SCREEN-SAVER
[    17.526] (II) Initializing extension DOUBLE-BUFFER
[    17.526] (II) Initializing extension RECORD
[    17.526] (II) Initializing extension DPMS
[    17.526] (II) Initializing extension Present
[    17.527] (II) Initializing extension DRI3
[    17.527] (II) Initializing extension X-Resource
[    17.527] (II) Initializing extension XVideo
[    17.527] (II) Initializing extension XVideo-MotionCompensation
[    17.527] (II) Initializing extension XFree86-VidModeExtension
[    17.527] (II) Initializing extension XFree86-DGA
[    17.527] (II) Initializing extension XFree86-DRI
[    17.527] (II) Initializing extension DRI2
[    17.527] (II) Initializing extension GLX
[    17.527] (II) Initializing extension GLX
[    17.527] (II) Indirect GLX disabled.
[    17.527] (II) Initializing extension NV-GLX
[    17.527] (II) Initializing extension NV-CONTROL
[    17.559] (II) modeset(G0): Damage tracking initialized
[    17.933] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    17.933] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    17.933] (II) LoadModule: "libinput"
[    17.933] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    17.976] (II) Module libinput: vendor="X.Org Foundation"
[    17.976] 	compiled for 1.21.1.3, module version = 1.2.1
[    17.976] 	Module class: X.Org XInput Driver
[    17.976] 	ABI class: X.Org XInput driver, version 24.4
[    17.976] (II) Using input driver 'libinput' for 'Power Button'
[    17.976] (**) Power Button: always reports core events
[    17.976] (**) Option "Device" "/dev/input/event1"
[    18.009] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    18.009] (II) event1  - Power Button: device is a keyboard
[    18.009] (II) event1  - Power Button: device removed
[    18.031] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    18.031] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.032] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    18.032] (II) event1  - Power Button: device is a keyboard
[    18.033] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    18.033] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    18.033] (II) Using input driver 'libinput' for 'Video Bus'
[    18.033] (**) Video Bus: always reports core events
[    18.033] (**) Option "Device" "/dev/input/event6"
[    18.034] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[    18.034] (II) event6  - Video Bus: device is a keyboard
[    18.034] (II) event6  - Video Bus: device removed
[    18.065] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
[    18.065] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    18.066] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[    18.066] (II) event6  - Video Bus: device is a keyboard
[    18.066] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    18.066] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    18.066] (II) Using input driver 'libinput' for 'Power Button'
[    18.066] (**) Power Button: always reports core events
[    18.066] (**) Option "Device" "/dev/input/event0"
[    18.067] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    18.067] (II) event0  - Power Button: device is a keyboard
[    18.067] (II) event0  - Power Button: device removed
[    18.081] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    18.081] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    18.082] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    18.082] (II) event0  - Power Button: device is a keyboard
[    18.083] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event7)
[    18.083] (II) No input driver specified, ignoring this device.
[    18.083] (II) This device may have been added with another device file.
[    18.083] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
[    18.083] (II) No input driver specified, ignoring this device.
[    18.083] (II) This device may have been added with another device file.
[    18.084] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[    18.084] (II) No input driver specified, ignoring this device.
[    18.084] (II) This device may have been added with another device file.
[    18.084] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[    18.084] (II) No input driver specified, ignoring this device.
[    18.084] (II) This device may have been added with another device file.
[    18.085] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event12)
[    18.085] (II) No input driver specified, ignoring this device.
[    18.085] (II) This device may have been added with another device file.
[    18.085] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[    18.085] (II) No input driver specified, ignoring this device.
[    18.085] (II) This device may have been added with another device file.
[    18.085] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    18.085] (II) No input driver specified, ignoring this device.
[    18.085] (II) This device may have been added with another device file.
[    18.086] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[    18.086] (II) No input driver specified, ignoring this device.
[    18.086] (II) This device may have been added with another device file.
[    18.086] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard (/dev/input/event2)
[    18.086] (**) Lite-On Technology Corp. USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    18.086] (II) Using input driver 'libinput' for 'Lite-On Technology Corp. USB Keyboard'
[    18.086] (**) Lite-On Technology Corp. USB Keyboard: always reports core events
[    18.086] (**) Option "Device" "/dev/input/event2"
[    18.088] (II) event2  - Lite-On Technology Corp. USB Keyboard: is tagged by udev as: Keyboard
[    18.088] (II) event2  - Lite-On Technology Corp. USB Keyboard: device is a keyboard
[    18.088] (II) event2  - Lite-On Technology Corp. USB Keyboard: device removed
[    18.108] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:04CA:004B.0001/input/input2/event2"
[    18.108] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard" (type: KEYBOARD, id 9)
[    18.110] (II) event2  - Lite-On Technology Corp. USB Keyboard: is tagged by udev as: Keyboard
[    18.110] (II) event2  - Lite-On Technology Corp. USB Keyboard: device is a keyboard
[    18.111] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard Consumer Control (/dev/input/event3)
[    18.111] (**) Lite-On Technology Corp. USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    18.111] (II) Using input driver 'libinput' for 'Lite-On Technology Corp. USB Keyboard Consumer Control'
[    18.111] (**) Lite-On Technology Corp. USB Keyboard Consumer Control: always reports core events
[    18.111] (**) Option "Device" "/dev/input/event3"
[    18.112] (II) event3  - Lite-On Technology Corp. USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    18.112] (II) event3  - Lite-On Technology Corp. USB Keyboard Consumer Control: device is a keyboard
[    18.112] (II) event3  - Lite-On Technology Corp. USB Keyboard Consumer Control: device removed
[    18.135] (II) libinput: Lite-On Technology Corp. USB Keyboard Consumer Control: needs a virtual subdevice
[    18.135] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:04CA:004B.0002/input/input3/event3"
[    18.135] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard Consumer Control" (type: MOUSE, id 10)
[    18.135] (**) Option "AccelerationScheme" "none"
[    18.135] (**) Lite-On Technology Corp. USB Keyboard Consumer Control: (accel) selected scheme none/0
[    18.135] (**) Lite-On Technology Corp. USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
[    18.135] (**) Lite-On Technology Corp. USB Keyboard Consumer Control: (accel) acceleration threshold: 4
[    18.136] (II) event3  - Lite-On Technology Corp. USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    18.136] (II) event3  - Lite-On Technology Corp. USB Keyboard Consumer Control: device is a keyboard
[    18.137] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard System Control (/dev/input/event4)
[    18.137] (**) Lite-On Technology Corp. USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[    18.137] (II) Using input driver 'libinput' for 'Lite-On Technology Corp. USB Keyboard System Control'
[    18.137] (**) Lite-On Technology Corp. USB Keyboard System Control: always reports core events
[    18.137] (**) Option "Device" "/dev/input/event4"
[    18.138] (II) event4  - Lite-On Technology Corp. USB Keyboard System Control: is tagged by udev as: Keyboard
[    18.138] (II) event4  - Lite-On Technology Corp. USB Keyboard System Control: device is a keyboard
[    18.139] (II) event4  - Lite-On Technology Corp. USB Keyboard System Control: device removed
[    18.161] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:04CA:004B.0002/input/input4/event4"
[    18.161] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard System Control" (type: KEYBOARD, id 11)
[    18.163] (II) event4  - Lite-On Technology Corp. USB Keyboard System Control: is tagged by udev as: Keyboard
[    18.163] (II) event4  - Lite-On Technology Corp. USB Keyboard System Control: device is a keyboard
[    18.163] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    18.163] (II) No input driver specified, ignoring this device.
[    18.163] (II) This device may have been added with another device file.
[    18.170] (**) Lite-On Technology Corp. USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    18.170] (II) Using input driver 'libinput' for 'Lite-On Technology Corp. USB Keyboard Consumer Control'
[    18.170] (**) Lite-On Technology Corp. USB Keyboard Consumer Control: always reports core events
[    18.170] (**) Option "Device" "/dev/input/event3"
[    18.170] (II) libinput: Lite-On Technology Corp. USB Keyboard Consumer Control: is a virtual subdevice
[    18.170] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:04CA:004B.0002/input/input3/event3"
[    18.170] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard Consumer Control" (type: KEYBOARD, id 12)
[    22.367] (II) event1  - Power Button: device removed
[    22.388] (II) event6  - Video Bus: device removed
[    22.428] (II) event0  - Power Button: device removed
[    22.445] (II) event2  - Lite-On Technology Corp. USB Keyboard: device removed
[    22.462] (II) event4  - Lite-On Technology Corp. USB Keyboard System Control: device removed
[    22.478] (II) event3  - Lite-On Technology Corp. USB Keyboard Consumer Control: device removed

Last edited by leduyquang753 (2022-07-20 03:43:41)

Offline

#2 2022-07-16 06:25:30

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,284

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

Did you

The wiki wrote:

Next, add the following two lines to the beginning of your ~/.xinitrc

?
Do you use xinit at all?

The log wrote:

[    13.842] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 16 11:51:41 2022

Cause X11 is running as root.

So, if likely you're not using xinit but a display manager, did you see the paragraphs below that statement?
Most DMs (afaik all but XDM) won't care about your xinitrc.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2022-07-16 06:34:27

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

seth wrote:

Did you

The wiki wrote:

Next, add the following two lines to the beginning of your ~/.xinitrc

?
Do you use xinit at all?

The log wrote:

[    13.842] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 16 11:51:41 2022

Cause X11 is running as root.

So, if likely you're not using xinit but a display manager, did you see the paragraphs below that statement?
Most DMs (afaik all but XDM) won't care about your xinitrc.

I did see the sections below that and wrote to /usr/share/sddm/scripts/Xsetup.

Offline

#4 2022-07-16 07:01:09

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,284

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

Boot into SDDM, switch to a different VT (ctrl+alt+f2)

export DISPLAY=:0
(xrandr --listproviders && xrandr -q) | curl -F 'file=@-' 0x0.st

and post the url you get.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2022-07-16 07:08:25

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

seth wrote:

Boot into SDDM, switch to a different VT (ctrl+alt+f2)

export DISPLAY=:0
(xrandr --listproviders && xrandr -q) | curl -F 'file=@-' 0x0.st

and post the url you get.

http://0x0.st/-k.txt

Well it appears the output is empty, the terminal output

Authorization required, but no authorization protocol specified.

Can't open display :0

Last edited by leduyquang753 (2022-07-16 07:14:35)

Offline

#6 2022-07-16 07:20:27

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,284

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

Ah, SDDM (probably) runs as root but you logged into your regular user.
sandwich.png

Edit: maybe I should post less memes or think more before.
Log into a root shell, in doubt "sudo -i".
Otherwise the subshell and export become more complicated.

Last edited by seth (2022-07-16 07:21:56)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2022-07-16 07:21:17

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

seth wrote:

Ah, SDDM (probably) runs as root but you logged into your regular user.
https://imgs.xkcd.com/comics/sandwich.png

Those commands were run as root, I tried user also and it gave "Invalid MIT-MAGIC-COOKIE-1 key" rather.

Offline

#8 2022-07-16 07:26:05

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,284

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

There's /usr/lib/sysusers.d/sddm.conf so SDDM probably runs as "sddm" user ("ps aux | grep sddm")
Try

(sudo -u sddm xrandr --display :0 --listproviders && sudo -u sddm xrandr --display :0  -q) | curl -F 'file=@-' 0x0.st

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2022-07-16 07:31:46

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

Still this output:

Authorization required, but no authorization protocol specified

Can't open display :0

Offline

#10 2022-07-16 07:49:59

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,284

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

Is there an X11 server running at all at this point?

sudo xhost +

will disable authorization completeley in that case and (hopefully) allow you to proceed.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2022-07-16 07:54:59

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

That has no effect either:

Authorization required, but no authorization protocol specified

xhost:  unable to open display ":0"

Last edited by leduyquang753 (2022-07-16 07:55:14)

Offline

#12 2022-07-16 08:10:35

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,284

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

seth wrote:

Is there an X11 server running at all at this point?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2022-07-16 08:16:44

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

seth wrote:

Is there an X11 server running at all at this point?

I still see Xorg, sddm, sddm-greeter,... in htop.

Offline

#14 2022-07-16 08:23:08

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

I just borrowed an HDMI to VGA converter, plugged it into the graphics card's HDMI port and apparently the signal is there, rather than the VGA port. So now the issue boils down to how to redirect this output to the VGA port. Should I also update the title?

Last edited by leduyquang753 (2022-07-16 08:23:56)

Offline

#15 2022-07-16 08:37:59

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,284

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

You might just have to "xrandr --output VGA-1-1 --auto" or so, though it would really help to be able to inspect the randr config while SDDM is running on X11…

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#16 2022-07-16 08:51:38

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

After being able to log in the commands run successfully now.

https://0x0.st/o1v_.txt

Offline

#17 2022-07-16 08:57:46

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,284

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

Ok, but that's w/ the HDMI adapter.
(At least we know that the provider names match the example in the wiki, so no error potential there)

What's "xrandr -q" when you plug an output into the VGA jack?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#18 2022-07-16 09:01:37

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

With both ports connected: https://0x0.st/o1v9.txt

Offline

#19 2022-07-16 14:34:01

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,284

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

So the output on VGA-1-1 is detected, do you see anything on it (is there a signal)?
Did you try "xrandr --output VGA-1-1 --auto" in /usr/share/sddm/scripts/Xsetup ?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#20 2022-07-16 14:37:54

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

After logging in I can enable the display through KDE's system tray, so now it's just that SDDM won't display the login on the VGA. I tried adding that in Xsetup along with --output HDMI-0 --off too, which didn't work.

Offline

#21 2022-07-16 14:56:11

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,284

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

You're not forking any commands in the Xsetup script, are you?
Try "sleep 1" between the two commands.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#22 2022-07-18 02:35:11

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

That doesn't have any effect either.

The current Xsetup script is now:

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --output HDMI-0 --off
sleep 1
xrandr --output VGA-1-1 --auto

Last edited by leduyquang753 (2022-07-18 02:38:06)

Offline

#23 2022-07-18 13:06:13

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,284

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

Debug what's going on there…

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr -q > /tmp/sddm.dbg.1
sleep 1
xrandr --output HDMI-0 --off
xrandr -q > /tmp/sddm.dbg.2
sleep 1
xrandr --output VGA-1-1 --auto
xrandr -q > /tmp/sddm.dbg.3

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#24 2022-07-19 02:45:13

leduyquang753
Member
From: Hanoi, Vietnam
Registered: 2022-07-16
Posts: 14
Website

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

Nothing is written out, those files aren't even created. I tried &> which didn't do anything either.

Offline

#25 2022-07-19 06:37:01

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 74,284

Re: [Solved] No display signal after setting Xorg to use NVIDIA GPU

Means the file isn't executed.

stat /usr/share/sddm/scripts/Xsetup
systemctl status sddm

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1 2

Board footer

Powered by FluxBB