You are not logged in.

Pages: 1

#1 2022-08-01 15:15:26

Saposan
Member
Registered: 2022-08-01
Posts: 5

[SOLVED] OpenGL applications use llvm instead of Nvidia

Hello! This is my first time posting here.

I've installed Arch recently on my old notebook (which I want to use for both work and games) and after installing nvidia drivers, opengl applications ignore nvidia drivers and use the integrated gpu instead, which I find odd since I installed GNOME 42 and it does pick up nvidia drivers.

I've confirmed on a few games that they are not using the nvidia drivers since perfomance was REALLY BAD (I know its old hardware but it should run cs1.6 with no issues but it doesn't) and after messing around in their console/settings, the games only saw Mesa Driver / llvm OpenGL.

Here's my current setup and what I've done trying to solve this issue:

My notebook is an Acer Aspire E5-511G, which has both and intel integrated gpu and a nvidia geforce 810m

Following the the archwiki article for Nvidia Optimus (particularly the "Use NVIDIA graphics only" section, since I only want to use NVIDIA:

  • I installed nvidia-390xx-utils package, then created the config file at etc/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf

  • enabled nvidia-drm to avoid screen tearing (it worked, yay!)

  • configured GDM to use X as backend.

I've read many posts like mine before which they were either messing with xorg.conf files (didn't work for me, gnome didn't even bother to start after editing .conf files) or had newer graphic cards which could use nvidia-prime and as far as I know 390 drivers do not support nvidia-prime

I'll gladly post logs or command outputs, any insight / help on this would be greatly appreciated.

Last edited by Saposan (2022-08-01 18:34:02)

Offline

#2 2022-08-01 15:26:59

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,504

Re: [SOLVED] OpenGL applications use llvm instead of Nvidia

I'll gladly post logs or command outputs

Start w/ the output of "lspci -k" and your xorg log, https://wiki.archlinux.org/title/Xorg#General

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#3 2022-08-01 16:27:24

Saposan
Member
Registered: 2022-08-01
Posts: 5

Re: [SOLVED] OpenGL applications use llvm instead of Nvidia

Thanks for the quick reply!

Here's the output for lspci -k

00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: i915
	Kernel modules: i915
00:13.0 SATA controller: Intel Corporation Atom Processor E3800 Series SATA AHCI Controller (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: ahci
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: mei_txe
	Kernel modules: mei_txe
00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 3 (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 4 (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich
00:1f.3 SMBus: Intel Corporation Atom Processor E3800/CE2700 Series SMBus Controller (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] (rev a1)
	Subsystem: Acer Incorporated [ALI] GeForce 810M
	Kernel driver in use: nvidia
	Kernel modules: nouveau, nvidia_drm, nvidia
02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
	Subsystem: Foxconn International, Inc. Device e07f
	Kernel driver in use: ath9k
	Kernel modules: ath9k
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader (rev 01)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: rtsx_pci
	Kernel modules: rtsx_pci
03:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)
	Subsystem: Acer Incorporated [ALI] Device 0905
	Kernel driver in use: r8169
	Kernel modules: r8169

and here's Xorg log

[     7.312] (--) Log file renamed from "/var/log/Xorg.pid-471.log" to "/var/log/Xorg.0.log"
[     7.316] 
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[     7.317] Current Operating System: Linux BlueArch 5.18.15-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 29 Jul 2022 22:52:39 +0000 x86_64
[     7.317] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a75a6822-a0c7-4066-94d5-fe5d05188bfe rw loglevel=3 quiet
[     7.317]  
[     7.317] Current version of pixman: 0.40.0
[     7.317] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     7.317] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     7.317] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 30 23:10:50 2022
[     7.322] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     7.322] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     7.325] (==) No Layout section.  Using the first Screen section.
[     7.325] (==) No screen section available. Using defaults.
[     7.325] (**) |-->Screen "Default Screen Section" (0)
[     7.325] (**) |   |-->Monitor "<default monitor>"
[     7.326] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     7.326] (==) Automatically adding devices
[     7.326] (==) Automatically enabling devices
[     7.326] (==) Automatically adding GPU devices
[     7.326] (==) Automatically binding GPU devices
[     7.327] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     7.329] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     7.329] 	Entry deleted from font path.
[     7.329] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[     7.329] 	Entry deleted from font path.
[     7.329] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     7.329] 	Entry deleted from font path.
[     7.329] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     7.329] 	Entry deleted from font path.
[     7.338] (==) FontPath set to:
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[     7.338] (==) ModulePath set to "/usr/lib/xorg/modules"
[     7.338] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     7.338] (II) Module ABI versions:
[     7.338] 	X.Org ANSI C Emulation: 0.4
[     7.338] 	X.Org Video Driver: 25.2
[     7.338] 	X.Org XInput driver : 24.4
[     7.338] 	X.Org Server Extension : 10.0
[     7.342] (++) using VT number 1

[     7.349] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[     7.356] (II) xfree86: Adding drm device (/dev/dri/card0)
[     7.356] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     7.359] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 14 paused 0
[     7.361] (II) xfree86: Adding drm device (/dev/dri/card1)
[     7.361] (II) Platform probe for /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/drm/card1
[     7.364] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 15 paused 0
[     7.370] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     7.370] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     7.370] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[     7.375] (--) PCI: (0@0:2:0) 8086:0f31:1025:0905 rev 14, Mem @ 0xa3000000/4194304, 0x80000000/268435456, I/O @ 0x00003050/8, BIOS @ 0x????????/131072
[     7.376] (--) PCI:*(1@0:0:0) 10de:1140:1025:092e rev 161, Mem @ 0xa2000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00002000/128
[     7.376] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     7.376] (II) LoadModule: "glx"
[     7.378] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[     7.505] (II) Module glx: vendor="NVIDIA Corporation"
[     7.505] 	compiled for 4.0.2, module version = 1.0.0
[     7.505] 	Module class: X.Org Server Extension
[     7.506] (II) NVIDIA GLX Module  390.151  Wed Apr 20 17:46:44 UTC 2022
[     7.507] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[     7.507] 	loading driver: nvidia
[     7.507] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[     7.507] 	loading driver: nvidia
[     7.507] (II) Applying OutputClass "intel" to /dev/dri/card0
[     7.507] 	loading driver: modesetting
[     7.507] (==) Matched nvidia as autoconfigured driver 0
[     7.507] (==) Matched nouveau as autoconfigured driver 1
[     7.507] (==) Matched nv as autoconfigured driver 2
[     7.507] (==) Matched modesetting as autoconfigured driver 3
[     7.507] (==) Matched intel as autoconfigured driver 4
[     7.507] (==) Matched fbdev as autoconfigured driver 5
[     7.507] (==) Matched vesa as autoconfigured driver 6
[     7.507] (==) Assigned the driver to the xf86ConfigLayout
[     7.507] (II) LoadModule: "nvidia"
[     7.512] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     7.522] (II) Module nvidia: vendor="NVIDIA Corporation"
[     7.522] 	compiled for 4.0.2, module version = 1.0.0
[     7.522] 	Module class: X.Org Video Driver
[     7.523] (II) LoadModule: "nouveau"
[     7.525] (WW) Warning, couldn't open module nouveau
[     7.525] (EE) Failed to load module "nouveau" (module does not exist, 0)
[     7.525] (II) LoadModule: "nv"
[     7.526] (WW) Warning, couldn't open module nv
[     7.526] (EE) Failed to load module "nv" (module does not exist, 0)
[     7.526] (II) LoadModule: "modesetting"
[     7.526] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     7.532] (II) Module modesetting: vendor="X.Org Foundation"
[     7.532] 	compiled for 1.21.1.4, module version = 1.21.1
[     7.532] 	Module class: X.Org Video Driver
[     7.532] 	ABI class: X.Org Video Driver, version 25.2
[     7.532] (II) LoadModule: "intel"
[     7.533] (WW) Warning, couldn't open module intel
[     7.533] (EE) Failed to load module "intel" (module does not exist, 0)
[     7.533] (II) LoadModule: "fbdev"
[     7.534] (WW) Warning, couldn't open module fbdev
[     7.534] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     7.534] (II) LoadModule: "vesa"
[     7.535] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     7.536] (II) Module vesa: vendor="X.Org Foundation"
[     7.536] 	compiled for 1.21.1.3, module version = 2.5.0
[     7.536] 	Module class: X.Org Video Driver
[     7.536] 	ABI class: X.Org Video Driver, version 25.2
[     7.537] (II) NVIDIA dlloader X Driver  390.151  Wed Apr 20 17:48:53 UTC 2022
[     7.537] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     7.538] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     7.538] (II) VESA: driver for VESA chipsets: vesa
[     7.538] (II) systemd-logind: releasing fd for 226:1
[     7.543] (II) Loading sub module "fb"
[     7.543] (II) LoadModule: "fb"
[     7.543] (II) Module "fb" already built-in
[     7.543] (II) Loading sub module "wfb"
[     7.543] (II) LoadModule: "wfb"
[     7.544] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     7.548] (II) Module wfb: vendor="X.Org Foundation"
[     7.548] 	compiled for 1.21.1.4, module version = 1.0.0
[     7.548] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     7.548] (II) Loading sub module "ramdac"
[     7.548] (II) LoadModule: "ramdac"
[     7.548] (II) Module "ramdac" already built-in
[     7.552] (WW) Falling back to old probe method for modesetting
[     7.552] (II) modeset(G0): using drv /dev/dri/card0
[     7.552] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     7.553] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     7.553] (==) NVIDIA(0): RGB weight 888
[     7.553] (==) NVIDIA(0): Default visual is TrueColor
[     7.553] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     7.554] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[     7.554] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[     7.554] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[     7.554] (**) NVIDIA(0): Enabling 2D acceleration
[     7.796] (II) NVIDIA(0): NVIDIA GPU GeForce 810M (GF117) at PCI:1:0:0 (GPU-0)
[     7.796] (--) NVIDIA(0): Memory: 1048576 kBytes
[     7.796] (--) NVIDIA(0): VideoBIOS: 75.17.86.00.28
[     7.796] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[     7.797] (II) NVIDIA(0): Validated MetaModes:
[     7.797] (II) NVIDIA(0):     "NULL"
[     7.797] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[     7.797] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[     7.797] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[     7.797] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[     7.797] (==) modeset(G0): RGB weight 888
[     7.797] (==) modeset(G0): Default visual is TrueColor
[     7.797] (II) Loading sub module "glamoregl"
[     7.797] (II) LoadModule: "glamoregl"
[     7.797] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     7.815] (II) Module glamoregl: vendor="X.Org Foundation"
[     7.815] 	compiled for 1.21.1.4, module version = 1.0.1
[     7.815] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.442] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics (BYT)
[     8.442] (II) modeset(G0): glamor initialized
[     8.446] (II) modeset(G0): Output eDP-1-1 has no monitor section
[     8.452] (II) modeset(G0): Output VGA-1-1 has no monitor section
[     8.453] (II) modeset(G0): Output DP-1-1 has no monitor section
[     8.455] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[     8.459] (II) modeset(G0): EDID for output eDP-1-1
[     8.459] (II) modeset(G0): Manufacturer: BOE  Model: 61d  Serial#: 0
[     8.459] (II) modeset(G0): Year: 2014  Week: 1
[     8.459] (II) modeset(G0): EDID Version: 1.4
[     8.459] (II) modeset(G0): Digital Display Input
[     8.459] (II) modeset(G0): 6 bits per channel
[     8.459] (II) modeset(G0): Digital interface is DisplayPort
[     8.459] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     8.459] (II) modeset(G0): Gamma: 2.20
[     8.459] (II) modeset(G0): No DPMS capabilities specified
[     8.460] (II) modeset(G0): Supported color encodings: RGB 4:4:4 
[     8.460] (II) modeset(G0): First detailed timing is preferred mode
[     8.460] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[     8.460] (II) modeset(G0): redX: 0.585 redY: 0.347   greenX: 0.334 greenY: 0.569
[     8.460] (II) modeset(G0): blueX: 0.164 blueY: 0.117   whiteX: 0.312 whiteY: 0.339
[     8.460] (II) modeset(G0): Manufacturer's mask: 0
[     8.460] (II) modeset(G0): Supported detailed timing:
[     8.460] (II) modeset(G0): clock: 72.3 MHz   Image Size:  309 x 173 mm
[     8.460] (II) modeset(G0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[     8.460] (II) modeset(G0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 790 v_border: 0
[     8.461] (II) modeset(G0):  BOE HF
[     8.461] (II) modeset(G0):  NT156WHM-N12
[     8.461] (II) modeset(G0): EDID (in hex):
[     8.461] (II) modeset(G0): 	00ffffffffffff0009e51d0600000000
[     8.461] (II) modeset(G0): 	011801049522137802fb0f955855912a
[     8.461] (II) modeset(G0): 	1e4f5600000001010101010101010101
[     8.461] (II) modeset(G0): 	0101010101013e1c56a0500016303020
[     8.461] (II) modeset(G0): 	360035ad1000001a0000000000000000
[     8.461] (II) modeset(G0): 	00000000000000000000000000fe0042
[     8.461] (II) modeset(G0): 	4f452048460a202020202020000000fe
[     8.461] (II) modeset(G0): 	004e5431353657484d2d4e31320a00e5
[     8.462] (II) modeset(G0): Printing probed modes for output eDP-1-1
[     8.462] (II) modeset(G0): Modeline "1366x768"x60.0   72.30  1366 1414 1446 1526  768 771 777 790 +hsync -vsync (47.4 kHz eP)
[     8.462] (II) modeset(G0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[     8.462] (II) modeset(G0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[     8.463] (II) modeset(G0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[     8.463] (II) modeset(G0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[     8.463] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     8.463] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     8.463] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     8.463] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     8.463] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     8.463] (II) modeset(G0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[     8.463] (II) modeset(G0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[     8.463] (II) modeset(G0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[     8.464] (II) modeset(G0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[     8.464] (II) modeset(G0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[     8.464] (II) modeset(G0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[     8.464] (II) modeset(G0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[     8.464] (II) modeset(G0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[     8.464] (II) modeset(G0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[     8.464] (II) modeset(G0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[     8.464] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     8.464] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     8.464] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     8.464] (II) modeset(G0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[     8.465] (II) modeset(G0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[     8.465] (II) modeset(G0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[     8.465] (II) modeset(G0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[     8.465] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     8.465] (II) modeset(G0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[     8.465] (II) modeset(G0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[     8.465] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     8.465] (II) modeset(G0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[     8.465] (II) modeset(G0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[     8.465] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     8.465] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     8.466] (II) modeset(G0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[     8.466] (II) modeset(G0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[     8.466] (II) modeset(G0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[     8.466] (II) modeset(G0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[     8.466] (II) modeset(G0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[     8.466] (II) modeset(G0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[     8.466] (II) modeset(G0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[     8.466] (II) modeset(G0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[     8.466] (II) modeset(G0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[     8.466] (II) modeset(G0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[     8.466] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     8.467] (II) modeset(G0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[     8.467] (II) modeset(G0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[     8.467] (II) modeset(G0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[     8.467] (II) modeset(G0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[     8.467] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     8.467] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     8.467] (II) modeset(G0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[     8.467] (II) modeset(G0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[     8.467] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     8.467] (II) modeset(G0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[     8.467] (II) modeset(G0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[     8.468] (II) modeset(G0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[     8.468] (II) modeset(G0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[     8.475] (II) modeset(G0): EDID for output VGA-1-1
[     8.475] (II) modeset(G0): EDID for output DP-1-1
[     8.476] (II) modeset(G0): EDID for output HDMI-1-1
[     8.477] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[     8.477] (==) modeset(G0): DPI set to (96, 96)
[     8.477] (II) Loading sub module "fb"
[     8.477] (II) LoadModule: "fb"
[     8.477] (II) Module "fb" already built-in
[     8.477] (II) UnloadModule: "vesa"
[     8.477] (II) Unloading vesa
[     8.479] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[     8.479] (II) NVIDIA:     access.
[     8.569] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     8.569] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     8.570] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     8.570] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     8.570] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     8.570] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     8.570] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     8.570] (II) NVIDIA(0):     Config Options in the README.
[     8.650] (II) NVIDIA(0): Setting mode "NULL"
[     8.662] (==) NVIDIA(0): Disabling shared memory pixmaps
[     8.662] (==) NVIDIA(0): Backing store enabled
[     8.662] (==) NVIDIA(0): Silken mouse enabled
[     8.663] (==) NVIDIA(0): DPMS enabled
[     8.663] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[     8.663] (II) Loading sub module "dri2"
[     8.663] (II) LoadModule: "dri2"
[     8.663] (II) Module "dri2" already built-in
[     8.664] (II) NVIDIA(0): [DRI2] Setup complete
[     8.664] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     8.872] (==) modeset(G0): Backing store enabled
[     8.872] (==) modeset(G0): Silken mouse enabled
[     8.969] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[     8.970] (==) modeset(G0): DPMS enabled
[     8.970] (II) modeset(G0): [DRI2] Setup complete
[     8.970] (II) modeset(G0): [DRI2]   DRI driver: crocus
[     8.970] (II) modeset(G0): [DRI2]   VDPAU driver: va_gl
[     8.970] (II) modeset(G0): Disable reverse prime offload mode for i915.
[     8.970] (II) Initializing extension Generic Event Extension
[     8.971] (II) Initializing extension SHAPE
[     8.971] (II) Initializing extension MIT-SHM
[     8.972] (II) Initializing extension XInputExtension
[     8.972] (II) Initializing extension XTEST
[     8.973] (II) Initializing extension BIG-REQUESTS
[     8.973] (II) Initializing extension SYNC
[     8.974] (II) Initializing extension XKEYBOARD
[     8.974] (II) Initializing extension XC-MISC
[     8.975] (II) Initializing extension SECURITY
[     8.976] (II) Initializing extension XFIXES
[     8.976] (II) Initializing extension RENDER
[     8.977] (II) Initializing extension RANDR
[     8.977] (II) Initializing extension COMPOSITE
[     8.978] (II) Initializing extension DAMAGE
[     8.979] (II) Initializing extension MIT-SCREEN-SAVER
[     8.979] (II) Initializing extension DOUBLE-BUFFER
[     8.980] (II) Initializing extension RECORD
[     8.980] (II) Initializing extension DPMS
[     8.980] (II) Initializing extension Present
[     8.981] (II) Initializing extension DRI3
[     8.982] (II) Initializing extension X-Resource
[     8.982] (II) Initializing extension XVideo
[     8.983] (II) Initializing extension XVideo-MotionCompensation
[     8.983] (II) Initializing extension XFree86-VidModeExtension
[     8.983] (II) Initializing extension XFree86-DGA
[     8.984] (II) Initializing extension XFree86-DRI
[     8.984] (II) Initializing extension DRI2
[     8.984] (II) Initializing extension GLX
[     8.984] (II) Initializing extension GLX
[     8.984] (II) Indirect GLX disabled.
[     8.985] (II) Initializing extension NV-GLX
[     8.985] (II) Initializing extension NV-CONTROL
[     9.313] (II) modeset(G0): Damage tracking initialized
[     9.729] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     9.729] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     9.729] (II) LoadModule: "libinput"
[     9.729] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     9.738] (II) Module libinput: vendor="X.Org Foundation"
[     9.738] 	compiled for 1.21.1.3, module version = 1.2.1
[     9.738] 	Module class: X.Org XInput Driver
[     9.738] 	ABI class: X.Org XInput driver, version 24.4
[     9.739] (II) Using input driver 'libinput' for 'Power Button'
[     9.745] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 45 paused 0
[     9.746] (**) Power Button: always reports core events
[     9.746] (**) Option "Device" "/dev/input/event3"
[     9.776] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     9.776] (II) event3  - Power Button: device is a keyboard
[     9.777] (II) event3  - Power Button: device removed
[     9.777] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[     9.777] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     9.779] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     9.779] (II) event3  - Power Button: device is a keyboard
[     9.781] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[     9.781] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     9.781] (II) Using input driver 'libinput' for 'Video Bus'
[     9.783] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 48 paused 0
[     9.783] (**) Video Bus: always reports core events
[     9.784] (**) Option "Device" "/dev/input/event12"
[     9.786] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[     9.786] (II) event12 - Video Bus: device is a keyboard
[     9.786] (II) event12 - Video Bus: device removed
[     9.787] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input17/event12"
[     9.787] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     9.789] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[     9.789] (II) event12 - Video Bus: device is a keyboard
[     9.791] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[     9.791] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     9.791] (II) Using input driver 'libinput' for 'Video Bus'
[     9.793] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 49 paused 0
[     9.793] (**) Video Bus: always reports core events
[     9.793] (**) Option "Device" "/dev/input/event11"
[     9.796] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[     9.796] (II) event11 - Video Bus: device is a keyboard
[     9.797] (II) event11 - Video Bus: device removed
[     9.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input16/event11"
[     9.797] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     9.800] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[     9.800] (II) event11 - Video Bus: device is a keyboard
[     9.802] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     9.802] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     9.802] (II) Using input driver 'libinput' for 'Power Button'
[     9.808] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 50 paused 0
[     9.808] (**) Power Button: always reports core events
[     9.808] (**) Option "Device" "/dev/input/event1"
[     9.813] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     9.813] (II) event1  - Power Button: device is a keyboard
[     9.814] (II) event1  - Power Button: device removed
[     9.814] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     9.814] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     9.817] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     9.817] (II) event1  - Power Button: device is a keyboard
[     9.820] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     9.820] (II) No input driver specified, ignoring this device.
[     9.820] (II) This device may have been added with another device file.
[     9.821] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     9.821] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     9.821] (II) Using input driver 'libinput' for 'Sleep Button'
[     9.827] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 51 paused 0
[     9.827] (**) Sleep Button: always reports core events
[     9.827] (**) Option "Device" "/dev/input/event2"
[     9.830] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[     9.830] (II) event2  - Sleep Button: device is a keyboard
[     9.831] (II) event2  - Sleep Button: device removed
[     9.831] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[     9.831] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[     9.834] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[     9.834] (II) event2  - Sleep Button: device is a keyboard
[     9.838] (II) config/udev: Adding input device HD WebCam: HD WebCam (/dev/input/event10)
[     9.838] (**) HD WebCam: HD WebCam: Applying InputClass "libinput keyboard catchall"
[     9.838] (II) Using input driver 'libinput' for 'HD WebCam: HD WebCam'
[     9.841] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 52 paused 0
[     9.842] (**) HD WebCam: HD WebCam: always reports core events
[     9.842] (**) Option "Device" "/dev/input/event10"
[     9.845] (II) event10 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[     9.846] (II) event10 - HD WebCam: HD WebCam: device is a keyboard
[     9.846] (II) event10 - HD WebCam: HD WebCam: device removed
[     9.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input15/event10"
[     9.846] (II) XINPUT: Adding extended input device "HD WebCam: HD WebCam" (type: KEYBOARD, id 11)
[     9.850] (II) event10 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[     9.850] (II) event10 - HD WebCam: HD WebCam: device is a keyboard
[     9.852] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[     9.852] (II) No input driver specified, ignoring this device.
[     9.852] (II) This device may have been added with another device file.
[     9.854] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[     9.854] (II) No input driver specified, ignoring this device.
[     9.854] (II) This device may have been added with another device file.
[     9.856] (II) config/udev: Adding input device SYN1B7E:01 06CB:2970 Mouse (/dev/input/event7)
[     9.856] (**) SYN1B7E:01 06CB:2970 Mouse: Applying InputClass "libinput pointer catchall"
[     9.856] (II) Using input driver 'libinput' for 'SYN1B7E:01 06CB:2970 Mouse'
[     9.859] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 53 paused 0
[     9.859] (**) SYN1B7E:01 06CB:2970 Mouse: always reports core events
[     9.859] (**) Option "Device" "/dev/input/event7"
[     9.862] (II) event7  - SYN1B7E:01 06CB:2970 Mouse: is tagged by udev as: Mouse Pointingstick
[     9.863] (II) event7  - SYN1B7E:01 06CB:2970 Mouse: device is a pointer
[     9.865] (II) event7  - SYN1B7E:01 06CB:2970 Mouse: device removed
[     9.865] (**) Option "config_info" "udev:/sys/devices/platform/80860F41:02/i2c-0/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input12/event7"
[     9.865] (II) XINPUT: Adding extended input device "SYN1B7E:01 06CB:2970 Mouse" (type: MOUSE, id 12)
[     9.865] (**) Option "AccelerationScheme" "none"
[     9.865] (**) SYN1B7E:01 06CB:2970 Mouse: (accel) selected scheme none/0
[     9.866] (**) SYN1B7E:01 06CB:2970 Mouse: (accel) acceleration factor: 2.000
[     9.866] (**) SYN1B7E:01 06CB:2970 Mouse: (accel) acceleration threshold: 4
[     9.868] (II) event7  - SYN1B7E:01 06CB:2970 Mouse: is tagged by udev as: Mouse Pointingstick
[     9.869] (II) event7  - SYN1B7E:01 06CB:2970 Mouse: device is a pointer
[     9.873] (II) config/udev: Adding input device SYN1B7E:01 06CB:2970 Mouse (/dev/input/mouse0)
[     9.873] (II) No input driver specified, ignoring this device.
[     9.873] (II) This device may have been added with another device file.
[     9.875] (II) config/udev: Adding input device SYN1B7E:01 06CB:2970 Touchpad (/dev/input/event9)
[     9.875] (**) SYN1B7E:01 06CB:2970 Touchpad: Applying InputClass "libinput touchpad catchall"
[     9.875] (II) Using input driver 'libinput' for 'SYN1B7E:01 06CB:2970 Touchpad'
[     9.878] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 54 paused 0
[     9.879] (**) SYN1B7E:01 06CB:2970 Touchpad: always reports core events
[     9.879] (**) Option "Device" "/dev/input/event9"
[     9.883] (II) event9  - SYN1B7E:01 06CB:2970 Touchpad: is tagged by udev as: Touchpad
[     9.888] (II) event9  - SYN1B7E:01 06CB:2970 Touchpad: device is a touchpad
[     9.888] (II) event9  - SYN1B7E:01 06CB:2970 Touchpad: device removed
[     9.889] (**) Option "config_info" "udev:/sys/devices/platform/80860F41:02/i2c-0/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input13/event9"
[     9.889] (II) XINPUT: Adding extended input device "SYN1B7E:01 06CB:2970 Touchpad" (type: TOUCHPAD, id 13)
[     9.894] (**) Option "AccelerationScheme" "none"
[     9.894] (**) SYN1B7E:01 06CB:2970 Touchpad: (accel) selected scheme none/0
[     9.894] (**) SYN1B7E:01 06CB:2970 Touchpad: (accel) acceleration factor: 2.000
[     9.894] (**) SYN1B7E:01 06CB:2970 Touchpad: (accel) acceleration threshold: 4
[     9.897] (II) event9  - SYN1B7E:01 06CB:2970 Touchpad: is tagged by udev as: Touchpad
[     9.901] (II) event9  - SYN1B7E:01 06CB:2970 Touchpad: device is a touchpad
[     9.904] (II) config/udev: Adding input device SYN1B7E:01 06CB:2970 Touchpad (/dev/input/mouse1)
[     9.904] (II) No input driver specified, ignoring this device.
[     9.904] (II) This device may have been added with another device file.
[     9.905] (II) config/udev: Adding input device Intel Virtual Buttons (/dev/input/event8)
[     9.905] (**) Intel Virtual Buttons: Applying InputClass "libinput keyboard catchall"
[     9.905] (II) Using input driver 'libinput' for 'Intel Virtual Buttons'
[     9.909] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 55 paused 0
[     9.909] (**) Intel Virtual Buttons: always reports core events
[     9.909] (**) Option "Device" "/dev/input/event8"
[     9.911] (II) event8  - Intel Virtual Buttons: is tagged by udev as: Keyboard
[     9.911] (II) event8  - Intel Virtual Buttons: device is a keyboard
[     9.912] (II) event8  - Intel Virtual Buttons: device removed
[     9.912] (**) Option "config_info" "udev:/sys/devices/platform/INT33D6:00/input/input9/event8"
[     9.912] (II) XINPUT: Adding extended input device "Intel Virtual Buttons" (type: KEYBOARD, id 14)
[     9.914] (II) event8  - Intel Virtual Buttons: is tagged by udev as: Keyboard
[     9.914] (II) event8  - Intel Virtual Buttons: device is a keyboard
[     9.916] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[     9.916] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     9.916] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     9.919] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 56 paused 0
[     9.919] (**) AT Translated Set 2 keyboard: always reports core events
[     9.919] (**) Option "Device" "/dev/input/event4"
[     9.922] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     9.922] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[     9.925] (II) event4  - AT Translated Set 2 keyboard: device removed
[     9.925] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[     9.925] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[     9.928] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     9.928] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[     9.931] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     9.932] (II) No input driver specified, ignoring this device.
[     9.932] (II) This device may have been added with another device file.
[     9.939] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event6)
[     9.939] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     9.939] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[     9.941] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 57 paused 0
[     9.941] (**) Acer WMI hotkeys: always reports core events
[     9.941] (**) Option "Device" "/dev/input/event6"
[     9.943] (II) event6  - Acer WMI hotkeys: is tagged by udev as: Keyboard
[     9.943] (II) event6  - Acer WMI hotkeys: device is a keyboard
[     9.943] (II) event6  - Acer WMI hotkeys: device removed
[     9.944] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event6"
[     9.944] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 16)
[     9.945] (II) event6  - Acer WMI hotkeys: is tagged by udev as: Keyboard
[     9.946] (II) event6  - Acer WMI hotkeys: device is a keyboard
[    10.751] randr: falling back to unsynchronized pixmap sharing
[    24.357] (**) Option "fd" "45"
[    24.357] (II) event3  - Power Button: device removed
[    24.359] (**) Option "fd" "48"
[    24.359] (II) event12 - Video Bus: device removed
[    24.362] (**) Option "fd" "49"
[    24.362] (II) event11 - Video Bus: device removed
[    24.365] (**) Option "fd" "50"
[    24.366] (II) event1  - Power Button: device removed
[    24.368] (**) Option "fd" "51"
[    24.369] (II) event2  - Sleep Button: device removed
[    24.371] (**) Option "fd" "52"
[    24.372] (II) event10 - HD WebCam: HD WebCam: device removed
[    24.374] (**) Option "fd" "53"
[    24.375] (II) event7  - SYN1B7E:01 06CB:2970 Mouse: device removed
[    24.377] (**) Option "fd" "54"
[    24.378] (II) event9  - SYN1B7E:01 06CB:2970 Touchpad: device removed
[    24.380] (**) Option "fd" "55"
[    24.380] (II) event8  - Intel Virtual Buttons: device removed
[    24.383] (**) Option "fd" "56"
[    24.383] (II) event4  - AT Translated Set 2 keyboard: device removed
[    24.386] (**) Option "fd" "57"
[    24.386] (II) event6  - Acer WMI hotkeys: device removed
[    24.406] (II) systemd-logind: got pause for 13:76
[    24.407] (II) systemd-logind: got pause for 13:74
[    24.407] (II) systemd-logind: got pause for 13:73
[    24.407] (II) systemd-logind: got pause for 13:68
[    24.408] (II) systemd-logind: got pause for 13:66
[    24.408] (II) systemd-logind: got pause for 13:75
[    24.408] (II) systemd-logind: got pause for 13:72
[    24.408] (II) systemd-logind: got pause for 13:65
[    24.409] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 342 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.409] (II) systemd-logind: got pause for 13:70
[    24.409] (II) systemd-logind: got pause for 13:71
[    24.409] (II) systemd-logind: got pause for 13:67
[    24.410] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 333 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.418] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 347 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.418] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 347 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.419] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 354 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.419] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 360 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.419] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 356 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.419] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 358 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.420] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 362 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.420] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 319 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.420] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 336 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.421] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 336 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.422] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 336 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.430] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 365 called but device is disabled.
This driver cannot change properties on a disabled device
[    24.432] (II) libinput: SYN1B7E:01 06CB:2970 Touchpad: SetProperty on 367 called but device is disabled.
This driver cannot change properties on a disabled device
[    36.187] (II) UnloadModule: "libinput"
[    36.187] (II) systemd-logind: releasing fd for 13:70
[    36.221] (II) UnloadModule: "libinput"
[    36.222] (II) systemd-logind: releasing fd for 13:68
[    36.242] (II) UnloadModule: "libinput"
[    36.242] (II) systemd-logind: releasing fd for 13:72
[    36.265] (II) UnloadModule: "libinput"
[    36.267] (II) systemd-logind: releasing fd for 13:73
[    36.285] (II) UnloadModule: "libinput"
[    36.285] (II) systemd-logind: releasing fd for 13:71
[    36.305] (II) UnloadModule: "libinput"
[    36.306] (II) systemd-logind: releasing fd for 13:74
[    36.325] (II) UnloadModule: "libinput"
[    36.325] (II) systemd-logind: releasing fd for 13:66
[    36.345] (II) UnloadModule: "libinput"
[    36.345] (II) systemd-logind: releasing fd for 13:65
[    36.365] (II) UnloadModule: "libinput"
[    36.365] (II) systemd-logind: releasing fd for 13:75
[    36.379] (II) UnloadModule: "libinput"
[    36.379] (II) systemd-logind: releasing fd for 13:76
[    36.399] (II) UnloadModule: "libinput"
[    36.399] (II) systemd-logind: releasing fd for 13:67
[    36.445] (II) NVIDIA(GPU-0): Deleting GPU-0
[    36.452] (II) Server terminated successfully (0). Closing log file.

Also the wiki article you posted mentions that GDM users should check systemd journal and that is quite the chunk of text, should I post it too "as is"? or should I filter it in some way?

Offline

#4 2022-08-01 16:36:39

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,504

Re: [SOLVED] OpenGL applications use llvm instead of Nvidia

[     7.317] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 30 23:10:50 2022

is dated (and the server terminated after ~30 seconds)
That server however ran on the nvida device and driver (which is a 3D chip "only", so it has to use the intel chip as VGA proxy)

The wiki links you forward to http://who-t.blogspot.com/2014/03/viewi … alctl.html but you can also just post the system journal, yes.

I suspect your problem is w/ the 32bit libraries

glxinfo -B
glxinfo32 -B

=> https://aur.archlinux.org/packages/lib3 … 90xx-utils

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#5 2022-08-01 18:33:18

Saposan
Member
Registered: 2022-08-01
Posts: 5

Re: [SOLVED] OpenGL applications use llvm instead of Nvidia

I suspect your problem is w/ the 32bit libraries

Your suspicion was right! glxinfo32 was not found on my system so I proceeded to install lib32 packages. I had to enable multilib repositories on pacman.conf to download those and now it works as its supposed to, thank you!

Now that I reread the nvidia driver article, I definitely missed that step, I'll be more careful next time.

Have a nice day!

Offline

Pages: 1

Board footer

Powered by FluxBB