You are not logged in.

Pages: 1

#1 2022-09-04 19:47:09

manouchk
Member
Registered: 2008-07-29
Posts: 313

[solved] no sound on Intel NUC (hdmi output)

Hi,
My sound just stopped after upgrading softwares. Kernel went from 5.14.14.arch1-1 to 5.19.6.arch1-1.

I use hdmi on HDA Intel PCH card.

Here are some audio configurations. What can I do?

list-cards

2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1f.3>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xdc340000 irq 137"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d71"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.form_factor = "internal"
		device.string = "1"
		device.description = "Audio interne"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Entrée Stéréo analogique (priority 32833, available: unknown)
		output:analog-stereo: Sortie Stéréo analogique (priority 6500, available: no)
		output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (priority 6565, available: unknown)
		output:hdmi-stereo: Sortie Digital Stereo (HDMI) (priority 38668, available: unknown)
		output:hdmi-stereo+input:analog-stereo: Sortie Digital Stereo (HDMI) + Entrée Stéréo analogique (priority 38733, available: unknown)
		output:hdmi-stereo-extra1: Sortie Digital Stereo (HDMI 2) (priority 5700, available: no)
		output:hdmi-stereo-extra1+input:analog-stereo: Sortie Digital Stereo (HDMI 2) + Entrée Stéréo analogique (priority 5765, available: unknown)
		output:hdmi-surround-extra1: Sortie Digital Surround 5.1 (HDMI 2) (priority 600, available: no)
		output:hdmi-surround-extra1+input:analog-stereo: Sortie Digital Surround 5.1 (HDMI 2) + Entrée Stéréo analogique (priority 665, available: unknown)
		output:hdmi-surround71-extra1: Sortie Digital Surround 7.1 (HDMI 2) (priority 600, available: no)
		output:hdmi-surround71-extra1+input:analog-stereo: Sortie Digital Surround 7.1 (HDMI 2) + Entrée Stéréo analogique (priority 665, available: unknown)
		output:hdmi-stereo-extra2: Sortie Digital Stereo (HDMI 3) (priority 5700, available: no)
		output:hdmi-stereo-extra2+input:analog-stereo: Sortie Digital Stereo (HDMI 3) + Entrée Stéréo analogique (priority 5765, available: unknown)
		output:hdmi-surround-extra2: Sortie Digital Surround 5.1 (HDMI 3) (priority 600, available: no)
		output:hdmi-surround-extra2+input:analog-stereo: Sortie Digital Surround 5.1 (HDMI 3) + Entrée Stéréo analogique (priority 665, available: unknown)
		output:hdmi-surround71-extra2: Sortie Digital Surround 7.1 (HDMI 3) (priority 600, available: no)
		output:hdmi-surround71-extra2+input:analog-stereo: Sortie Digital Surround 7.1 (HDMI 3) + Entrée Stéréo analogique (priority 665, available: unknown)
		output:hdmi-stereo-extra3: Sortie Digital Stereo (HDMI 4) (priority 5700, available: no)
		output:hdmi-stereo-extra3+input:analog-stereo: Sortie Digital Stereo (HDMI 4) + Entrée Stéréo analogique (priority 5765, available: unknown)
		output:hdmi-surround-extra3: Sortie Digital Surround 5.1 (HDMI 4) (priority 600, available: no)
		output:hdmi-surround-extra3+input:analog-stereo: Sortie Digital Surround 5.1 (HDMI 4) + Entrée Stéréo analogique (priority 665, available: unknown)
		output:hdmi-surround71-extra3: Sortie Digital Surround 7.1 (HDMI 4) (priority 600, available: no)
		output:hdmi-surround71-extra3+input:analog-stereo: Sortie Digital Surround 7.1 (HDMI 4) + Entrée Stéréo analogique (priority 665, available: unknown)
		output:hdmi-stereo-extra4: Sortie Digital Stereo (HDMI 5) (priority 5700, available: no)
		output:hdmi-stereo-extra4+input:analog-stereo: Sortie Digital Stereo (HDMI 5) + Entrée Stéréo analogique (priority 5765, available: unknown)
		output:hdmi-surround-extra4: Sortie Digital Surround 5.1 (HDMI 5) (priority 600, available: no)
		output:hdmi-surround-extra4+input:analog-stereo: Sortie Digital Surround 5.1 (HDMI 5) + Entrée Stéréo analogique (priority 665, available: unknown)
		output:hdmi-surround71-extra4: Sortie Digital Surround 7.1 (HDMI 5) (priority 600, available: no)
		output:hdmi-surround71-extra4+input:analog-stereo: Sortie Digital Surround 7.1 (HDMI 5) + Entrée Stéréo analogique (priority 665, available: unknown)
		off: Éteint (priority 0, available: unknown)
	active profile: <output:hdmi-stereo>
	sinks:
		alsa_output.pci-0000_00_1f.3.hdmi-stereo/#4: Audio interne Digital Stereo (HDMI)
	sources:
		alsa_output.pci-0000_00_1f.3.hdmi-stereo.monitor/#6: Monitor of Audio interne Digital Stereo (HDMI)
	ports:
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "T24B350"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.platform-snd_aloop.0>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "0"
		alsa.card_name = "Loopback"
		alsa.long_card_name = "Loopback 1"
		alsa.driver_name = "snd_aloop"
		device.bus_path = "platform-snd_aloop.0"
		sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Audio interne"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card"
	profiles:
		input:analog-stereo: Entrée Stéréo analogique (priority 65, available: unknown)
		output:analog-stereo: Sortie Stéréo analogique (priority 6500, available: unknown)
		output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (priority 6565, available: unknown)
		output:analog-surround-21: Sortie Surround analogique 2.1 (priority 1300, available: unknown)
		output:analog-surround-21+input:analog-stereo: Sortie Surround analogique 2.1 + Entrée Stéréo analogique (priority 1365, available: unknown)
		output:analog-surround-40: Sortie Surround analogique 4.0 (priority 1200, available: unknown)
		output:analog-surround-40+input:analog-stereo: Sortie Surround analogique 4.0 + Entrée Stéréo analogique (priority 1265, available: unknown)
		output:analog-surround-41: Sortie Surround analogique 4.1 (priority 1300, available: unknown)
		output:analog-surround-41+input:analog-stereo: Sortie Surround analogique 4.1 + Entrée Stéréo analogique (priority 1365, available: unknown)
		output:analog-surround-50: Sortie Surround analogique 5.0 (priority 1200, available: unknown)
		output:analog-surround-50+input:analog-stereo: Sortie Surround analogique 5.0 + Entrée Stéréo analogique (priority 1265, available: unknown)
		output:analog-surround-51: Sortie Surround analogique 5.1 (priority 1300, available: unknown)
		output:analog-surround-51+input:analog-stereo: Sortie Surround analogique 5.1 + Entrée Stéréo analogique (priority 1365, available: unknown)
		output:analog-surround-71: Sortie Analog Surround 7.1 (priority 1200, available: unknown)
		output:analog-surround-71+input:analog-stereo: Sortie Analog Surround 7.1 + Entrée Stéréo analogique (priority 1265, available: unknown)
		off: Éteint (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.platform-snd_aloop.0.analog-stereo/#1: Audio interne Stéréo analogique
	sources:
		alsa_output.platform-snd_aloop.0.analog-stereo.monitor/#1: Monitor of Audio interne Stéréo analogique
		alsa_input.platform-snd_aloop.0.analog-stereo/#2: Audio interne Stéréo analogique
	ports:
		analog-input: Analog Input (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:

aplay -lL

null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pipewire
    PipeWire Sound Server
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Loopback
    Loopback, Loopback PCM
    Default Audio Device
front:CARD=Loopback,DEV=0
    Loopback, Loopback PCM
    Front output / input
surround21:CARD=Loopback,DEV=0
    Loopback, Loopback PCM
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Loopback,DEV=0
    Loopback, Loopback PCM
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Loopback,DEV=0
    Loopback, Loopback PCM
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Loopback,DEV=0
    Loopback, Loopback PCM
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Loopback,DEV=0
    Loopback, Loopback PCM
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Loopback,DEV=0
    Loopback, Loopback PCM
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
usbstream:CARD=Loopback
    Loopback
    USB Stream Output
sysdefault:CARD=PCH
    HDA Intel PCH, ALC283 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    Front output / input
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC283 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, T24B350
    HDMI Audio Output
hdmi:CARD=PCH,DEV=1
    HDA Intel PCH, HDMI 1
    HDMI Audio Output
hdmi:CARD=PCH,DEV=2
    HDA Intel PCH, HDMI 2
    HDMI Audio Output
hdmi:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 3
    HDMI Audio Output
hdmi:CARD=PCH,DEV=4
    HDA Intel PCH, HDMI 4
    HDMI Audio Output
usbstream:CARD=PCH
    HDA Intel PCH
    USB Stream Output
**** Liste des périphériques matériels PLAYBACK ****
carte 0 : Loopback [Loopback], périphérique 0 : Loopback PCM [Loopback PCM]
  Sous-périphériques : 7/8
  Sous-périphérique #0 : subdevice #0
  Sous-périphérique #1 : subdevice #1
  Sous-périphérique #2 : subdevice #2
  Sous-périphérique #3 : subdevice #3
  Sous-périphérique #4 : subdevice #4
  Sous-périphérique #5 : subdevice #5
  Sous-périphérique #6 : subdevice #6
  Sous-périphérique #7 : subdevice #7
carte 0 : Loopback [Loopback], périphérique 1 : Loopback PCM [Loopback PCM]
  Sous-périphériques : 8/8
  Sous-périphérique #0 : subdevice #0
  Sous-périphérique #1 : subdevice #1
  Sous-périphérique #2 : subdevice #2
  Sous-périphérique #3 : subdevice #3
  Sous-périphérique #4 : subdevice #4
  Sous-périphérique #5 : subdevice #5
  Sous-périphérique #6 : subdevice #6
  Sous-périphérique #7 : subdevice #7
carte 1 : PCH [HDA Intel PCH], périphérique 0 : ALC283 Analog [ALC283 Analog]
  Sous-périphériques : 1/1
  Sous-périphérique #0 : subdevice #0
carte 1 : PCH [HDA Intel PCH], périphérique 3 : HDMI 0 [T24B350]
  Sous-périphériques : 0/1
  Sous-périphérique #0 : subdevice #0
carte 1 : PCH [HDA Intel PCH], périphérique 7 : HDMI 1 [HDMI 1]
  Sous-périphériques : 1/1
  Sous-périphérique #0 : subdevice #0
carte 1 : PCH [HDA Intel PCH], périphérique 8 : HDMI 2 [HDMI 2]
  Sous-périphériques : 1/1
  Sous-périphérique #0 : subdevice #0
carte 1 : PCH [HDA Intel PCH], périphérique 9 : HDMI 3 [HDMI 3]
  Sous-périphériques : 1/1
  Sous-périphérique #0 : subdevice #0
carte 1 : PCH [HDA Intel PCH], périphérique 10 : HDMI 4 [HDMI 4]
  Sous-périphériques : 1/1
  Sous-périphérique #0 : subdevice #0

pactl list sinks

Destination #1
	État : IDLE
	Nom : alsa_output.platform-snd_aloop.0.analog-stereo
	Description : Audio interne Stéréo analogique
	Pilote : module-alsa-card.c
	Spécification de l’échantillon : s16le 2ch 48000Hz
	Plan des canaux : front-left,front-right
	Module du propriétaire : 7
	Sourdine : non
	Volume : front-left: 60944 /  93% / -1,89 dB,   front-right: 60944 /  93% / -1,89 dB
	        balance 0,00
	Volume de base : 65536 / 100% / 0,00 dB
	Source du moniteur : alsa_output.platform-snd_aloop.0.analog-stereo.monitor
	Latence : 28728 usec, configuré 40000 usec
	Marqueurs : HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Propriétés :
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "Loopback PCM"
		alsa.id = "Loopback PCM"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "Loopback"
		alsa.long_card_name = "Loopback 1"
		alsa.driver_name = "snd_aloop"
		device.bus_path = "platform-snd_aloop.0"
		sysfs.path = "/devices/platform/snd_aloop.0/sound/card0"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "384000"
		device.buffering.fragment_size = "384000"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Stéréo analogique"
		device.description = "Audio interne Stéréo analogique"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card"
	Ports :
		analog-output: Analog Output (type: Analog, priority: 9900, availability unknown)
	Port actif : analog-output
	Formats :
		pcm

Destination #4
	État : IDLE
	Nom : alsa_output.pci-0000_00_1f.3.hdmi-stereo
	Description : Audio interne Digital Stereo (HDMI)
	Pilote : module-alsa-card.c
	Spécification de l’échantillon : s16le 2ch 48000Hz
	Plan des canaux : front-left,front-right
	Module du propriétaire : 6
	Sourdine : non
	Volume : front-left: 50630 /  77% / -6,72 dB,   front-right: 50630 /  77% / -6,72 dB
	        balance 0,00
	Volume de base : 65536 / 100% / 0,00 dB
	Source du moniteur : alsa_output.pci-0000_00_1f.3.hdmi-stereo.monitor
	Latence : 40648 usec, configuré 40000 usec
	Marqueurs : HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
	Propriétés :
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "T24B350"
		alsa.id = "HDMI 0"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "3"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xdc340000 irq 137"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d71"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.form_factor = "internal"
		device.string = "hdmi:1"
		device.buffering.buffer_size = "384000"
		device.buffering.fragment_size = "192000"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo"
		device.profile.description = "Digital Stereo (HDMI)"
		device.description = "Audio interne Digital Stereo (HDMI)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports :
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, available)
	Port actif : hdmi-output-0
	Formats :
		dts-iec61937, format.rate = "[ 32000, 44100, 48000 ]"
		pcm

pactl list sink-inputs returns nothing

sudo fuser -v /dev/snd/*

Cannot stat file /proc/893/fd/4: Permission denied
Cannot stat file /proc/893/fd/5: Permission denied
Cannot stat file /proc/893/fd/6: Permission denied
Cannot stat file /proc/893/fd/25: Permission denied
Cannot stat file /proc/893/fd/28: Permission denied
Cannot stat file /proc/893/fd/29: Permission denied
Cannot stat file /proc/893/fd/30: Permission denied
Cannot stat file /proc/893/fd/31: Permission denied
Cannot stat file /proc/893/fd/32: Permission denied
Cannot stat file /proc/893/fd/33: Permission denied
Cannot stat file /proc/893/fd/82: Permission denied
Cannot stat file /proc/893/fd/83: Permission denied
Cannot stat file /proc/893/fd/1023: Permission denied
Cannot stat file /proc/1036/fd/5: Permission denied
Cannot stat file /proc/1036/fd/6: Permission denied
Cannot stat file /proc/1036/fd/7: Permission denied
Cannot stat file /proc/1036/fd/8: Permission denied
Cannot stat file /proc/1036/fd/9: Permission denied
Cannot stat file /proc/1036/fd/10: Permission denied
Cannot stat file /proc/1036/fd/11: Permission denied
Cannot stat file /proc/1036/fd/12: Permission denied
Cannot stat file /proc/1036/fd/13: Permission denied
Cannot stat file /proc/1200/fd/4: Permission denied
Cannot stat file /proc/1200/fd/5: Permission denied
Cannot stat file /proc/1200/fd/6: Permission denied
Cannot stat file /proc/1200/fd/25: Permission denied
Cannot stat file /proc/1200/fd/28: Permission denied
Cannot stat file /proc/1200/fd/29: Permission denied
Cannot stat file /proc/1200/fd/30: Permission denied
Cannot stat file /proc/1200/fd/31: Permission denied
Cannot stat file /proc/1200/fd/32: Permission denied
Cannot stat file /proc/1200/fd/33: Permission denied
Cannot stat file /proc/1200/fd/1023: Permission denied
Cannot stat file /proc/1422/fd/5: Permission denied
Cannot stat file /proc/1422/fd/6: Permission denied
Cannot stat file /proc/1422/fd/7: Permission denied
Cannot stat file /proc/1422/fd/8: Permission denied
Cannot stat file /proc/1422/fd/9: Permission denied
Cannot stat file /proc/1422/fd/10: Permission denied
Cannot stat file /proc/1422/fd/11: Permission denied
Cannot stat file /proc/1422/fd/12: Permission denied
Cannot stat file /proc/1422/fd/13: Permission denied
Cannot stat file /proc/1422/fd/17: Permission denied
Cannot stat file /proc/1422/fd/18: Permission denied
Cannot stat file /proc/1422/fd/37: Permission denied
Cannot stat file /proc/1437/fd/5: Permission denied
Cannot stat file /proc/1437/fd/6: Permission denied
Cannot stat file /proc/1437/fd/7: Permission denied
Cannot stat file /proc/1437/fd/8: Permission denied
Cannot stat file /proc/1437/fd/9: Permission denied
Cannot stat file /proc/1437/fd/10: Permission denied
Cannot stat file /proc/1437/fd/11: Permission denied
Cannot stat file /proc/1437/fd/12: Permission denied
Cannot stat file /proc/1437/fd/13: Permission denied
Cannot stat file /proc/1437/fd/17: Permission denied
Cannot stat file /proc/1437/fd/18: Permission denied
Cannot stat file /proc/1437/fd/37: Permission denied
                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  manu        839 F.... pulseaudio
/dev/snd/controlC1:  manu        839 F.... pulseaudio
/dev/snd/pcmC0D0c:   manu        839 F...m pulseaudio
/dev/snd/pcmC0D0p:   manu        839 F...m pulseaudio
/dev/snd/pcmC1D3p:   manu        839 F...m pulseaudio

There is a new default.pa that I did not use so I will also post the result of:
diff /etc/pulse/default.pa /etc/pulse/default.pa.pacnew

69a70
> load-module module-dbus-protocol
88c89
< ### Load additional modules from GConf settings. This can be configured with the paprefs tool.
---
> ### Load additional modules from GSettings. This can be configured with the paprefs tool.
91c92
< .ifexists module-gconf.so
---
> .ifexists module-gsettings.so
93c94
< load-module module-gconf
---
> load-module module-gsettings
103,106d103
< ### Automatically move streams to the default sink if the sink they are
< ### connected to dies, similar for sources
< load-module module-rescue-streams
< 
139,140c136,137
< set-default-sink alsa_output.pci-0000_00_1f.3.hdmi-stereo.monitor
< set-default-source alsa_input.usb-ZOOM_Corporation_H1-00.iec958-stereo
---
> #set-default-sink output
> #set-default-source input
142c139,143
< #set-default-source alsa_output.pci-0000_00_1f.3.hdmi-stereo.monitor
---
> ### Allow including a default.pa.d directory, which if present, can be used
> ### for additional configuration snippets.
> ### Note that those snippet files must have a .pa file extension, not .conf
> .nofail
> .include /etc/pulse/default.pa.d

Last edited by manouchk (2022-09-05 02:37:51)

Offline

#2 2022-09-04 21:36:43

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,660

Re: [solved] no sound on Intel NUC (hdmi output)

As a sanity check, do the version numbers reported by uname -a and by pacman -Q linux match?

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way

Online

#3 2022-09-05 00:21:11

manouchk
Member
Registered: 2008-07-29
Posts: 313

Re: [solved] no sound on Intel NUC (hdmi output)

It seems ok:

$ uname -a
Linux manulemalin 5.19.6-arch1-1 #1 SMP PREEMPT_DYNAMIC Wed, 31 Aug 2022 22:09:40 +0000 x86_64 GNU/Linux
$ pacman -Q linux
linux 5.19.6.arch1-1

Offline

#4 2022-09-05 02:37:28

manouchk
Member
Registered: 2008-07-29
Posts: 313

Re: [solved] no sound on Intel NUC (hdmi output)

Well,
I finally solved the problem. I don't know exactly what was the exact problem, maybe simply the default sink.

I just finally switched to the new default.pa file (/etc/pulse/default.pa.pacnew move to /etc/pulse/default.pa, I of course saved the old config file that I was using)
and I created ~/.config/pulse/default.pa with the line:

.include /etc/pulse/default.pa
set-default-sink alsa_output.pci-0000_00_1f.3.hdmi-stereo

In order to find the default sink, I used: pacmd list-sinks | grep -Ei 'index:|name:', which in my case returns:

.include /etc/pulse/default.pa
set-default-sink alsa_output.pci-0000_00_1f.3.hdmi-stereo

Here is what I did though:
I downgraded kernel to anterior version and it did not solve the problem. I tried the new default.pa file (/etc/pulse/default.pa.pacnew move to /etc/pulse/default.pa, I of course saved the old config file that I was using)
It did not solve the problem
I also downgraded recently updated pulse package (sudo downgrade libpulse pulseaudio pulseaudio-alsa pulseaudio-equalizer)
If I'm not wrong, it did not solve the problem.
I had asistray (apulseaudio graphical frontend) installed and I found that the default sink was not hdmi. I just had to switch with asystray which is simple. Then I made the adjustments I mentionned at the beginning of this reply.

Last edited by manouchk (2022-09-05 02:40:13)

Offline

Pages: 1

Board footer

Powered by FluxBB