You are not logged in.
- Topics: Active | Unanswered
#1 2022-10-19 14:45:44
- ttshaw1
- Member
- Registered: 2020-04-12
- Posts: 38
[SOLVED] Have to clear ~/.local/state/wireplumber on every reboot
Since upgrading pipewire and attendant packages to 1:0.3.59-2, sound hasn't been working well on my system. When I start my computer, nothing can play audio until I clear ~/.local/state/wireplumber and reboot, at which point I can have one process play audio. For example, Lollypop music player will play one song, then throw an error when the next queued one should start. Or I can open VLC and watch a movie. I'm looking to get to the root cause of this rather than doing something hacky like writing a script to constantly clear wireplumber settings. Any advice?
Output for relevant commands below
pactl list cards
Card #0
Name: alsa_card.usb-E1DA_E1DA__9038D_PCM32_384_DSD256_CTUA181119A-00
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "2"
alsa.card_name = "E1DA #9038D PCM32/384 DSD256"
alsa.long_card_name = "E1DA E1DA #9038D PCM32/384 DSD256 at usb-0000:02:00.0-1, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:02:00.0-usb-0:1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-1/1-1:1.0/sound/card2"
udev.id = "usb-E1DA_E1DA_#9038D_PCM32_384_DSD256_CTUA181119A-00"
device.bus = "usb"
device.vendor.id = "2fc6"
device.vendor.name = "Comtrue Inc."
device.product.id = "6013"
device.product.name = "E1DA #9038D PCM32/384 DSD256"
device.serial = "E1DA_E1DA_#9038D_PCM32_384_DSD256_CTUA181119A"
device.string = "2"
device.description = "E1DA #9038D PCM32/384 DSD256"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Profiles:
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:iec958-stereo
Ports:
analog-output: Analog Output (type: Analog, priority: 9900, latency offset: 0 usec, availability unknown)
Part of profile(s): output:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Part of profile(s): output:iec958-stereo
Card #1
Name: alsa_card.pci-0000_0a_00.1
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfce60000 irq 76"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0a:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aaf0"
device.product.name = "Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]"
device.string = "0"
device.description = "Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 38468, available: yes)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:hdmi-stereo-extra2
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, available)
Properties:
device.icon_name = "video-display"
device.product.name = "PHL 246V5"
Part of profile(s): output:hdmi-stereo-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
Card #2
Name: alsa_card.usb-USB_Camera_USB_Camera_SN0001-02
Driver: module-alsa-card.c
Owner Module: 8
Properties:
alsa.card = "3"
alsa.card_name = "USB Camera"
alsa.long_card_name = "USB Camera USB Camera at usb-0000:0b:00.3-1, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0b:00.3-usb-0:1:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:07.1/0000:0b:00.3/usb3/3-1/3-1:1.2/sound/card3"
udev.id = "usb-USB_Camera_USB_Camera_SN0001-02"
device.bus = "usb"
device.vendor.id = "0c45"
device.vendor.name = "Microdia"
device.product.id = "6366"
device.product.name = "Webcam Vitade AF"
device.serial = "USB_Camera_USB_Camera_SN0001"
device.form_factor = "webcam"
device.string = "3"
device.description = "Webcam Vitade AF"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
Profiles:
input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: input:mono-fallback
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:mono-fallback
Card #3
Name: alsa_card.pci-0000_0c_00.3
Driver: module-alsa-card.c
Owner Module: 9
Properties:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfcd00000 irq 78"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0c:00.3"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "1457"
device.product.name = "Family 17h (Models 00h-0fh) HD Audio Controller"
device.string = "1"
device.description = "Family 17h (Models 00h-0fh) HD Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 39268, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 33968, available: yes)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo
Ports:
analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo
analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo
analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, not available)
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo
analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability unknown)
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereopactl list sinks
Sink #0
State: SUSPENDED
Name: alsa_output.usb-E1DA_E1DA__9038D_PCM32_384_DSD256_CTUA181119A-00.iec958-stereo
Description: E1DA #9038D PCM32/384 DSD256 Digital Stereo (IEC958)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 32768 / 50% / -18.06 dB, front-right: 32768 / 50% / -18.06 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.usb-E1DA_E1DA__9038D_PCM32_384_DSD256_CTUA181119A-00.iec958-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "E1DA #9038D PCM32/384 DSD256"
alsa.long_card_name = "E1DA E1DA #9038D PCM32/384 DSD256 at usb-0000:02:00.0-1, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:02:00.0-usb-0:1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-1/1-1:1.0/sound/card2"
udev.id = "usb-E1DA_E1DA_#9038D_PCM32_384_DSD256_CTUA181119A-00"
device.bus = "usb"
device.vendor.id = "2fc6"
device.vendor.name = "Comtrue Inc."
device.product.id = "6013"
device.product.name = "E1DA #9038D PCM32/384 DSD256"
device.serial = "E1DA_E1DA_#9038D_PCM32_384_DSD256_CTUA181119A"
device.string = "iec958:2"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "iec958-stereo"
device.profile.description = "Digital Stereo (IEC958)"
device.description = "E1DA #9038D PCM32/384 DSD256 Digital Stereo (IEC958)"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Ports:
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, availability unknown)
Active Port: iec958-stereo-output
Formats:
pcm
Sink #1
State: SUSPENDED
Name: alsa_output.pci-0000_0a_00.1.hdmi-stereo-extra2
Description: Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] Digital Stereo (HDMI 3)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_0a_00.1.hdmi-stereo-extra2.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "PHL 246V5"
alsa.id = "HDMI 2"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "8"
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfce60000 irq 76"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0a:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aaf0"
device.product.name = "Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]"
device.string = "hdmi:0,2"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo-extra2"
device.profile.description = "Digital Stereo (HDMI 3)"
device.description = "Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] Digital Stereo (HDMI 3)"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, available)
Active Port: hdmi-output-2
Formats:
pcm
Sink #2
State: SUSPENDED
Name: alsa_output.pci-0000_0c_00.3.analog-stereo
Description: Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 9
Mute: no
Volume: front-left: 27111 / 41% / -23.00 dB, front-right: 27111 / 41% / -23.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_0c_00.3.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC892 Analog"
alsa.id = "ALC892 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfcd00000 irq 78"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0c:00.3"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "1457"
device.product.name = "Family 17h (Models 00h-0fh) HD Audio Controller"
device.string = "front:1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-lineout: Line Out (type: Line, priority: 9000, availability unknown)
analog-output-headphones: Headphones (type: Headphones, priority: 9900, not available)
Active Port: analog-output-lineout
Formats:
pcmpactl list sink-inputs
Sink Input #10
Driver: protocol-native.c
Owner Module: 14
Client: 22
Sink: 2
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"s16le\"" format.channels = "2" format.rate = "44100" format.channel_map = "\"front-left,front-right\""
Corked: yes
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 104943 usec
Sink Latency: 0 usec
Resample method: n/a
Properties:
media.name = "'Title' by 'Artist'"
application.name = "Lollypop"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
media.role = "music"
application.icon_name = "org.gnome.Lollypop"
application.process.id = "1041"
application.process.user = "user"
application.process.host = "host"
application.process.binary = "python3.10"
application.language = "C"
window.x11.display = ":1"
application.process.machine_id = "f73a00a351324b5eba39deeafc40d4f9"
application.process.session_id = "1"
module-stream-restore.id = "sink-input-by-media-role:music"
media.title = "Title"
media.artist = "Artist"sudo fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: user 1002 F.... pulseaudio
user 1109 F.... wireplumber
/dev/snd/controlC1: user 1002 F.... pulseaudio
user 1109 F.... wireplumber
/dev/snd/controlC2: user 1002 F.... pulseaudio
user 1109 F.... wireplumber
/dev/snd/controlC3: user 1002 F.... pulseaudio
user 1109 F.... wireplumber
/dev/snd/seq: user 1108 F.... pipewireLast edited by ttshaw1 (2022-10-21 00:03:02)
Offline
#2 2022-10-19 15:10:32
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,935
Re: [SOLVED] Have to clear ~/.local/state/wireplumber on every reboot
Why is pulseaudio running as well? You want either pulseaudio or wireplumber controlling your audio devices, not both. If you want to actually switch to pipewire as a stack then install pipewire-audio and pipewire-pulse (... and pipewire-alsa) if you want to stay on pulseaudio and only use pipewire for screen sharing remove pipewire-audio and wireplumber and switch that to pipewire-media-session and keep pulseaudio.
Last edited by V1del (2022-10-19 15:12:08)
Offline
#3 2022-10-21 00:02:43
- ttshaw1
- Member
- Registered: 2020-04-12
- Posts: 38
Re: [SOLVED] Have to clear ~/.local/state/wireplumber on every reboot
I installed pipewire-pulse, which uninstalled pulseaudio and another package or two. That seems to have solved it. Thanks!
Offline