You are not logged in.

Pages: 1

#1 2022-11-05 09:53:50

Taughtimp2786
Member
Registered: 2021-11-03
Posts: 43

Getting segmentation faults everywhere with app crashes

After my system corrupted (https://bbs.archlinux.org/viewtopic.php?id=280475), I reinstalled the OS after I backed up some files and folders. But now there are still many problems like Firefox crashes the instant I start it, but gets fixed after I restart one or more times, then crashes again. Same problems come up with Spotify and Signal.

Is it because the corruption spread from the backed up files?
Is it possible to get everything working again?
Do I have to buy a new hard drive?

Offline

#2 2022-11-05 21:45:04

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 7,171

Re: Getting segmentation faults everywhere with app crashes

What does smartctl -a output for the drive?

Which files did you replace from the backed up files? Whether crashes in Firefox, say, are due to that earlier corruption will depend on whether you used relevant backed up files and, if so, whether they were corrupted.

If you make a new user account, do you experience problems there?

CLI Paste | How To Ask Questions

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#3 2022-11-13 12:53:11

Taughtimp2786
Member
Registered: 2021-11-03
Posts: 43

Re: Getting segmentation faults everywhere with app crashes

Sorry for the very late reply.

Output of smartctl -a:

smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.0.2-zen1-1-zen] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST1000DM003-1ER162
Serial Number:    Z4Y6HY1P
LU WWN Device Id: 5 000c50 07af64306
Firmware Version: CC45
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database 7.3/5319
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Nov 13 18:13:25 2022 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   80) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 102) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x1085)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   119   093   006    Pre-fail  Always       -       225716592
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   098   098   020    Old_age   Always       -       2301
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       16
  7 Seek_Error_Rate         0x000f   080   060   030    Pre-fail  Always       -       115382160
  9 Power_On_Hours          0x0032   053   053   000    Old_age   Always       -       41244
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   097   097   020    Old_age   Always       -       3605
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   098   000    Old_age   Always       -       33 44 46
189 High_Fly_Writes         0x003a   001   001   000    Old_age   Always       -       4355
190 Airflow_Temperature_Cel 0x0022   052   044   045    Old_age   Always   In_the_past 48 (Min/Max 25/49 #30)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       1186
193 Load_Cycle_Count        0x0032   089   089   000    Old_age   Always       -       22821
194 Temperature_Celsius     0x0022   048   056   000    Old_age   Always       -       48 (0 17 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       2702h+50m+21.954s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       10337653456
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       345424384365

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     40857         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The files I backed up were:
- .config
- .local
- .mozilla
- .oh-my-zsh
- .p10k.zsh
- Autostart  Desktop  Documents  Downloads  Games  Music  Pictures  Public  Templates  Videos  go  package-lock.json
- .zshrc.pre-oh-my-zsh

and some other files in /etc

Offline

#4 2022-11-13 14:53:43

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,790

Re: Getting segmentation faults everywhere with app crashes

  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       16

This is not a good sign at all - you lost some sectors.
Your last test is 387h ago - if you have backups of all valuable data, run https://wiki.archlinux.org/title/Badblocks to see how bad things are
(the non-destructive mode will take considerably longer than the destructive, but will not erase your data. It might still expose some data loss)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB