Arch Linux

eeepyn

Member

Registered: 2022-10-30

Posts: 2

no sound after reboot

hello, everyone!
I'm newbie.  first, I'm sorry for my poor English!
I just use arch several days ago.
I got sound correctly on my arch at first.
I don't know what  I did yesterday, the sound is gone right now! And I can't find the answer for my question.
Please help me! Thank you very much!

some information :
computer: NUC11PAHi5

lspci | grep -i audio
00:1f.3 Audio device: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller (rev 20)

cat /etc/modprobe.d/alsa-base.conf
options snd_hda_intel index=0  model=dell-headset-multi

$ cat /proc/asound/cards
0 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0x603d1a0000 irq 175

$ amixer
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 65536
  Mono:
  Front Left: Playback 65936 [101%] [on]
  Front Right: Playback 65936 [101%] [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch cswitch-joined
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 65536
  Front Left: Capture 65540 [100%] [on]
  Front Right: Capture 65540 [100%] [on]

$ aplay -L
null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
    HDA Intel PCH, ALC256 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC256 Analog
    Front output / input
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC256 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC256 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC256 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC256 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC256 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC256 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, LG SDQHD
    HDMI Audio Output
hdmi:CARD=PCH,DEV=1
    HDA Intel PCH, HDMI 1
    HDMI Audio Output
hdmi:CARD=PCH,DEV=2
    HDA Intel PCH, HDMI 2
    HDMI Audio Output
hdmi:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 3
    HDMI Audio Output
hdmi:CARD=PCH,DEV=4
    HDA Intel PCH, HDMI 4
    HDMI Audio Output
hdmi:CARD=PCH,DEV=5
    HDA Intel PCH, HDMI 5
    HDMI Audio Output
hdmi:CARD=PCH,DEV=6
    HDA Intel PCH, HDMI 6
    HDMI Audio Output
hdmi:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 7
    HDMI Audio Output
hdmi:CARD=PCH,DEV=8
    HDA Intel PCH, HDMI 8
    HDMI Audio Output
hdmi:CARD=PCH,DEV=9
    HDA Intel PCH, HDMI 9
    HDMI Audio Output
hdmi:CARD=PCH,DEV=10
    HDA Intel PCH, HDMI 10
    HDMI Audio Output
usbstream:CARD=PCH
    HDA Intel PCH
    USB Stream Output

Last edited by eeepyn (2022-11-13 03:02:32)

eeepyn

Member

Registered: 2022-10-30

Posts: 2

Re: no sound after reboot

I found the answer, touch a new file ~/.asoundrc, reboot. got sound!
$ cat ~/.asoundrc
defaults.pcm.card 3