You are not logged in.

#1 2022-11-20 09:03:26

hikmateustad
Member
Registered: 2022-01-23
Posts: 17

Cannot connect to WiFi with TP-Link Archer T3U Plus AC 1300 [Solved]

I have TP-Link Archer T3U Plus(US) AC 1300 Version 1.0

I am running the zen kernel

hikmateustad@hikmateustad-dell ~ % uname -r                                     
6.0.9-zen1-1-zen

Installed rtl88x2bu-dkms-git driver which went successfully with no error messages.

Rebooted

Network manager does not show any wireless connections.

lsusb detects the TP-Link Card

hikmateustad@hikmateustad-dell ~ % lsusb
Bus 002 Device 005: ID 1a2c:2124 China Resource Semico Co., Ltd Keyboard
Bus 002 Device 004: ID 04d9:0499 Holtek Semiconductor, Inc. Optical Mouse
Bus 002 Device 003: ID 2357:0138 TP-Link 802.11ac NIC
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 04f2:b2a8 Chicony Electronics Co., Ltd Laptop_Integrated_Webcam_HD
Bus 001 Device 005: ID 8086:0189 Intel Corp. Centrino Advanced-N 6230 Bluetooth adapter
Bus 001 Device 004: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card Reader Controller
Bus 001 Device 003: ID 0408:3008 Quanta Computer, Inc. Optical Touch Screen
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lsusb -v detects card correctly

Bus 002 Device 003: ID 2357:0138 TP-Link 802.11ac NIC
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x2357 TP-Link
  idProduct          0x0138 
  bcdDevice            2.10
  iManufacturer           1 Realtek
  iProduct                2 802.11ac NIC
  iSerial                 3 123456
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0035
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           5
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              2 802.11ac NIC
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x06  EP 6 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x08  EP 8 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength       0x0016
  bNumDeviceCaps          2
  USB 2.0 Extension Device Capability:
    bLength                 7
    bDescriptorType        16
    bDevCapabilityType      2
    bmAttributes   0x00000002
      HIRD Link Power Management (LPM) Supported
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x0006
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat          10 micro seconds
    bU2DevExitLat        1023 micro seconds
Device Status:     0x0000
  (Bus Powered)

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x8087 Intel Corp.
  idProduct          0x0024 Integrated Rate Matching Hub
  bcdDevice            0.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0019
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             6
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0503 highspeed power enable connect
   Port 4: 0000.0100 power
   Port 5: 0000.0303 lowspeed power enable connect
   Port 6: 0000.0303 lowspeed power enable connect
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

modprobe 88x2bu does not return anything

hikmateustad@hikmateustad-dell ~ % modprobe 88x2bu
hikmateustad@hikmateustad-dell ~ % 

dmesg -w shows registered the driver but fails to load

[   35.380239] RTW: rtl88x2bu v5.13.1-20-gbd7c7eb9d.20210702_COEX20210316-18317b7b
[   35.380240] RTW: rtl88x2bu BT-Coex version = COEX20210316-18317b7b
[   35.750431] usbcore: registered new interface driver rtl88x2bu
[   35.750436] RTW: module init ret=0

Full output of dmesg -w

[    0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[    0.000000] Linux version 6.0.9-zen1-1-zen (linux-zen@archlinux) (gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0) #1 ZEN SMP PREEMPT_DYNAMIC Wed, 16 Nov 2022 17:00:58 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-zen root=UUID=d6f6d2ae-57c9-4961-bdb1-716f0f93b378 rw quiet loglevel=3 audit=0 nowatchdog mitigations=off
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bac07fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bac08000-0x00000000bac50fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bac51000-0x00000000bac58fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bac59000-0x00000000bac6cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bac6d000-0x00000000bac6dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bac6e000-0x00000000bac7dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bac7e000-0x00000000bac8dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bac8e000-0x00000000bacb1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bacb2000-0x00000000bacf4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bacf5000-0x00000000bae5dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bae5e000-0x00000000baff6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baff7000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc. Inspiron One 2320  /0XW3KG           , BIOS A10 09/17/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.245 MHz processor
[    0.000949] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000953] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000965] last_pfn = 0x43f800 max_arch_pfn = 0x400000000
[    0.001578] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002025] total RAM covered: 16304M
[    0.002242] Found optimal setting for mtrr clean up
[    0.002243]  gran_size: 64K 	chunk_size: 128M 	num_reg: 8  	lose cover RAM: 0G
[    0.002971] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[    0.002980] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.013671] found SMP MP-table at [mem 0x000fcef0-0x000fceff]
[    0.013689] Kernel/User page tables isolation: disabled on command line.
[    0.014254] RAMDISK: [mem 0x362ff000-0x37176fff]
[    0.014259] ACPI: Early table checksum verification disabled
[    0.014263] ACPI: RSDP 0x00000000000F0440 000024 (v02 DELL  )
[    0.014267] ACPI: XSDT 0x00000000BAC51070 00005C (v01 DELL   AS09     01072009 AMI  00010013)
[    0.014274] ACPI: FACP 0x00000000BAC581B8 0000F4 (v04 DELL   AS09     01072009 AMI  00010013)
[    0.014281] ACPI: DSDT 0x00000000BAC51158 00705D (v02 DELL   AS09     00000000 INTL 20051117)
[    0.014285] ACPI: FACS 0x00000000BAC83F80 000040
[    0.014288] ACPI: APIC 0x00000000BAC582B0 000072 (v03 DELL   AS09     01072009 AMI  00010013)
[    0.014292] ACPI: SSDT 0x00000000BAC58328 000102 (v01 DELL   AS09     00000001 MSFT 03000001)
[    0.014295] ACPI: MCFG 0x00000000BAC58430 00003C (v01 DELL   AS09     01072009 MSFT 00000097)
[    0.014299] ACPI: SLIC 0x00000000BAC58470 000176 (v01 DELL   AS09     01072009 AMI  00010013)
[    0.014303] ACPI: HPET 0x00000000BAC585E8 000038 (v01 DELL   AS09     01072009 AMI. 00000004)
[    0.014306] ACPI: OSFR 0x00000000BAC58620 000082 (v01 DELL   AS09     07DC0911 ASL  00000061)
[    0.014309] ACPI: Reserving FACP table memory at [mem 0xbac581b8-0xbac582ab]
[    0.014311] ACPI: Reserving DSDT table memory at [mem 0xbac51158-0xbac581b4]
[    0.014312] ACPI: Reserving FACS table memory at [mem 0xbac83f80-0xbac83fbf]
[    0.014313] ACPI: Reserving APIC table memory at [mem 0xbac582b0-0xbac58321]
[    0.014314] ACPI: Reserving SSDT table memory at [mem 0xbac58328-0xbac58429]
[    0.014315] ACPI: Reserving MCFG table memory at [mem 0xbac58430-0xbac5846b]
[    0.014316] ACPI: Reserving SLIC table memory at [mem 0xbac58470-0xbac585e5]
[    0.014317] ACPI: Reserving HPET table memory at [mem 0xbac585e8-0xbac5861f]
[    0.014318] ACPI: Reserving OSFR table memory at [mem 0xbac58620-0xbac586a1]
[    0.014371] No NUMA configuration found
[    0.014372] Faking a node at [mem 0x0000000000000000-0x000000043f7fffff]
[    0.014375] NODE_DATA(0) allocated [mem 0x43f7f0000-0x43f7f3fff]
[    0.014415] Zone ranges:
[    0.014416]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.014418]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.014420]   Normal   [mem 0x0000000100000000-0x000000043f7fffff]
[    0.014421]   Device   empty
[    0.014422] Movable zone start for each node
[    0.014423] Early memory node ranges
[    0.014424]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.014426]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.014427]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.014428]   node   0: [mem 0x0000000040200000-0x00000000bac07fff]
[    0.014429]   node   0: [mem 0x00000000bac6d000-0x00000000bac6dfff]
[    0.014430]   node   0: [mem 0x00000000bacf5000-0x00000000bae5dfff]
[    0.014431]   node   0: [mem 0x00000000baff7000-0x00000000baffffff]
[    0.014432]   node   0: [mem 0x0000000100000000-0x000000043f7fffff]
[    0.014436] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f7fffff]
[    0.014441] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.014468] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.016296] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.019975] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.019981] On node 0, zone DMA32: 101 pages in unavailable ranges
[    0.019987] On node 0, zone DMA32: 135 pages in unavailable ranges
[    0.019995] On node 0, zone DMA32: 409 pages in unavailable ranges
[    0.045100] On node 0, zone Normal: 20480 pages in unavailable ranges
[    0.045141] On node 0, zone Normal: 2048 pages in unavailable ranges
[    0.045160] Reserving Intel graphics memory at [mem 0xbba00000-0xbf9fffff]
[    0.045248] ACPI: PM-Timer IO Port: 0x408
[    0.045257] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.045269] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.045272] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.045275] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.045280] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.045281] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.045286] TSC deadline timer available
[    0.045287] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.045313] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.045316] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.045317] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.045318] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.045319] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.045320] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.045322] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.045324] PM: hibernation: Registered nosave memory: [mem 0xbac08000-0xbac50fff]
[    0.045325] PM: hibernation: Registered nosave memory: [mem 0xbac51000-0xbac58fff]
[    0.045326] PM: hibernation: Registered nosave memory: [mem 0xbac59000-0xbac6cfff]
[    0.045328] PM: hibernation: Registered nosave memory: [mem 0xbac6e000-0xbac7dfff]
[    0.045329] PM: hibernation: Registered nosave memory: [mem 0xbac7e000-0xbac8dfff]
[    0.045330] PM: hibernation: Registered nosave memory: [mem 0xbac8e000-0xbacb1fff]
[    0.045331] PM: hibernation: Registered nosave memory: [mem 0xbacb2000-0xbacf4fff]
[    0.045333] PM: hibernation: Registered nosave memory: [mem 0xbae5e000-0xbaff6fff]
[    0.045335] PM: hibernation: Registered nosave memory: [mem 0xbb000000-0xbb7fffff]
[    0.045336] PM: hibernation: Registered nosave memory: [mem 0xbb800000-0xbf9fffff]
[    0.045337] PM: hibernation: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]
[    0.045337] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.045338] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.045339] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.045341] [mem 0xbfa00000-0xfed1bfff] available for PCI devices
[    0.045342] Booting paravirtualized kernel on bare hardware
[    0.045345] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.052892] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.053077] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u524288
[    0.053084] pcpu-alloc: s221184 r8192 d28672 u524288 alloc=1*2097152
[    0.053087] pcpu-alloc: [0] 0 1 2 3 
[    0.053114] Fallback order for Node 0: 0 
[    0.053117] Built 1 zonelists, mobility grouping on.  Total pages: 4104693
[    0.053118] Policy zone: Normal
[    0.053119] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-zen root=UUID=d6f6d2ae-57c9-4961-bdb1-716f0f93b378 rw quiet loglevel=3 audit=0 nowatchdog mitigations=off
[    0.053210] audit: disabled (until reboot)
[    0.053249] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-zen", will be passed to user space.
[    0.054154] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.054605] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.054781] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.054786] software IO TLB: area num 4.
[    0.112078] Memory: 16263004K/16680028K available (18439K kernel code, 2098K rwdata, 11252K rodata, 2136K init, 3336K bss, 416764K reserved, 0K cma-reserved)
[    0.112445] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.112464] ftrace: allocating 43684 entries in 171 pages
[    0.120470] ftrace: allocated 171 pages with 5 groups
[    0.120564] Dynamic Preempt: full
[    0.120611] rcu: Preemptible hierarchical RCU implementation.
[    0.120612] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.120613] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.120615] 	Trampoline variant of Tasks RCU enabled.
[    0.120616] 	Rude variant of Tasks RCU enabled.
[    0.120616] 	Tracing variant of Tasks RCU enabled.
[    0.120617] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.120618] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.126206] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[    0.126394] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.126529] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.126568] Console: colour dummy device 80x25
[    0.126587] printk: console [tty0] enabled
[    0.126615] ACPI: Core revision 20220331
[    0.126715] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.126731] APIC: Switch to symmetric I/O mode setup
[    0.126801] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.127251] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.131731] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f3fd34342, max_idle_ns: 440795309589 ns
[    0.131737] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.49 BogoMIPS (lpj=2494245)
[    0.131740] pid_max: default: 32768 minimum: 301
[    0.131815] LSM: Security Framework initializing
[    0.131822] landlock: Up and running.
[    0.131824] Yama: becoming mindful.
[    0.131839] LSM support for eBPF active
[    0.131911] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.131941] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.132275] CPU0: Thermal monitoring enabled (TM1)
[    0.132298] process: using mwait in idle threads
[    0.132301] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.132302] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.132307] Spectre V2 : User space: Vulnerable
[    0.132309] Speculative Store Bypass: Vulnerable
[    0.154340] Freeing SMP alternatives memory: 44K
[    0.154834] smpboot: CPU0: Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.155054] cblist_init_generic: Setting adjustable number of callback queues.
[    0.155056] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.155077] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.155101] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.155118] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.155136] ... version:                3
[    0.155137] ... bit width:              48
[    0.155138] ... generic registers:      8
[    0.155139] ... value mask:             0000ffffffffffff
[    0.155140] ... max period:             00007fffffffffff
[    0.155141] ... fixed-purpose events:   3
[    0.155142] ... event mask:             00000007000000ff
[    0.155251] Estimated ratio of average max frequency by base frequency (times 1024): 1064
[    0.155277] rcu: Hierarchical SRCU implementation.
[    0.155279] rcu: 	Max phase no-delay instances is 400.
[    0.155906] smp: Bringing up secondary CPUs ...
[    0.156049] x86: Booting SMP configuration:
[    0.156050] .... node  #0, CPUs:      #1 #2 #3
[    0.162755] smp: Brought up 1 node, 4 CPUs
[    0.162759] smpboot: Max logical packages: 1
[    0.162760] smpboot: Total of 4 processors activated (19953.96 BogoMIPS)
[    0.164263] devtmpfs: initialized
[    0.164263] x86/mm: Memory block size: 128MB
[    0.166008] ACPI: PM: Registering ACPI NVS region [mem 0xbac08000-0xbac50fff] (299008 bytes)
[    0.166019] ACPI: PM: Registering ACPI NVS region [mem 0xbac7e000-0xbac8dfff] (65536 bytes)
[    0.166021] ACPI: PM: Registering ACPI NVS region [mem 0xbacb2000-0xbacf4fff] (274432 bytes)
[    0.166073] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.166082] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.166138] pinctrl core: initialized pinctrl subsystem
[    0.166284] PM: RTC time: 08:04:07, date: 2022-11-20
[    0.166899] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.167201] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.167386] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.167566] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.167724] thermal_sys: Registered thermal governor 'fair_share'
[    0.167726] thermal_sys: Registered thermal governor 'bang_bang'
[    0.167727] thermal_sys: Registered thermal governor 'step_wise'
[    0.167728] thermal_sys: Registered thermal governor 'user_space'
[    0.167729] thermal_sys: Registered thermal governor 'power_allocator'
[    0.167805] cpuidle: using governor ladder
[    0.167811] cpuidle: using governor menu
[    0.167885] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.167986] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.167992] PCI: not using MMCONFIG
[    0.167999] PCI: Using configuration type 1 for base access
[    0.168078] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.168187] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.170191] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.175979] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.175979] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.175979] ACPI: Added _OSI(Module Device)
[    0.175979] ACPI: Added _OSI(Processor Device)
[    0.175979] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.175979] ACPI: Added _OSI(Processor Aggregator Device)
[    0.175979] ACPI: Added _OSI(Linux-Dell-Video)
[    0.175979] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.175979] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.181715] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.182757] ACPI: Dynamic OEM Table Load:
[    0.182764] ACPI: SSDT 0xFFFF8A72402D8C00 0003B0 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.183266] ACPI: Dynamic OEM Table Load:
[    0.183270] ACPI: SSDT 0xFFFF8A72410AF6C0 000084 (v01 AMI    CST      00000001 MSFT 03000001)
[    0.184211] ACPI: EC: EC started
[    0.184213] ACPI: EC: interrupt blocked
[    0.184263] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.184266] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
[    0.184268] ACPI: Interpreter enabled
[    0.184286] ACPI: PM: (supports S0 S3 S4 S5)
[    0.184287] ACPI: Using IOAPIC for interrupt routing
[    0.184318] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.184421] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[    0.184432] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.184434] PCI: Using E820 reservations for host bridge windows
[    0.184622] ACPI: Enabled 12 GPEs in block 00 to 3F
[    0.184936] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.190930] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.190938] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.191049] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[    0.191245] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.191254] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.191671] PCI host bridge to bus 0000:00
[    0.191674] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.191676] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.191678] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.191679] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.191681] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.191683] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window]
[    0.191685] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.191702] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.191777] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.191813] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.191898] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.191907] pci 0000:00:02.0: reg 0x10: [mem 0xfb400000-0xfb7fffff 64bit]
[    0.191913] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.191917] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.191930] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.192029] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.192051] pci 0000:00:16.0: reg 0x10: [mem 0xfb808000-0xfb80800f 64bit]
[    0.192125] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.192195] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.192212] pci 0000:00:1a.0: reg 0x10: [mem 0xfb807000-0xfb8073ff]
[    0.192296] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.192389] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.192408] pci 0000:00:1b.0: reg 0x10: [mem 0xfb800000-0xfb803fff 64bit]
[    0.192487] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.192557] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.192647] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.192750] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.192841] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.192938] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.193028] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.193131] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.193220] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.193327] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.193345] pci 0000:00:1d.0: reg 0x10: [mem 0xfb806000-0xfb8063ff]
[    0.193429] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.193523] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.193709] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.193723] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.193731] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.193740] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.193748] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.193756] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.193764] pci 0000:00:1f.2: reg 0x24: [mem 0xfb805000-0xfb8057ff]
[    0.193805] pci 0000:00:1f.2: PME# supported from D3hot
[    0.193888] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.193907] pci 0000:00:1f.3: reg 0x10: [mem 0xfb804000-0xfb8040ff 64bit]
[    0.193928] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.194053] pci 0000:01:00.0: [10de:0df5] type 00 class 0x030000
[    0.194062] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.194069] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.194076] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.194081] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.194086] pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[    0.194091] pci 0000:01:00.0: enabling Extended Tags
[    0.194102] pci 0000:01:00.0: Enabling HDA controller
[    0.194549] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[    0.194559] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x00003fff]
[    0.194582] pci 0000:01:00.1: enabling Extended Tags
[    0.194654] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[    0.196757] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.196760] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.196763] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.196766] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[    0.196807] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.196858] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.196909] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.196994] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.197021] pci 0000:05:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.197055] pci 0000:05:00.0: reg 0x18: [mem 0xe2104000-0xe2104fff 64bit pref]
[    0.197077] pci 0000:05:00.0: reg 0x20: [mem 0xe2100000-0xe2103fff 64bit pref]
[    0.197201] pci 0000:05:00.0: supports D1 D2
[    0.197202] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.197381] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.197385] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.197393] pci 0000:00:1c.5:   bridge window [mem 0xe2100000-0xe21fffff 64bit pref]
[    0.197940] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.198020] ACPI: PCI: Interrupt link LNKB configured for IRQ 5
[    0.198098] ACPI: PCI: Interrupt link LNKC configured for IRQ 3
[    0.198175] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.198252] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.198329] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.198405] ACPI: PCI: Interrupt link LNKG configured for IRQ 10
[    0.198482] ACPI: PCI: Interrupt link LNKH configured for IRQ 7
[    0.198589] ACPI: EC: interrupt unblocked
[    0.198591] ACPI: EC: event unblocked
[    0.198596] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.198598] ACPI: EC: GPE=0x1c
[    0.198599] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete
[    0.198602] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
[    0.198649] iommu: Default domain type: Translated 
[    0.198650] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.198844] SCSI subsystem initialized
[    0.198852] libata version 3.00 loaded.
[    0.198852] ACPI: bus type USB registered
[    0.198852] usbcore: registered new interface driver usbfs
[    0.198852] usbcore: registered new interface driver hub
[    0.198852] usbcore: registered new device driver usb
[    0.198852] pps_core: LinuxPPS API ver. 1 registered
[    0.198852] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.198852] PTP clock support registered
[    0.198852] EDAC MC: Ver: 3.0.0
[    0.198940] NetLabel: Initializing
[    0.198942] NetLabel:  domain hash size = 128
[    0.198943] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.198960] NetLabel:  unlabeled traffic allowed by default
[    0.198965] mctp: management component transport protocol core
[    0.198966] NET: Registered PF_MCTP protocol family
[    0.198970] PCI: Using ACPI for IRQ routing
[    0.200790] PCI: pci_cache_line_size set to 64 bytes
[    0.200834] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.200836] e820: reserve RAM buffer [mem 0xbac08000-0xbbffffff]
[    0.200838] e820: reserve RAM buffer [mem 0xbac6e000-0xbbffffff]
[    0.200840] e820: reserve RAM buffer [mem 0xbae5e000-0xbbffffff]
[    0.200841] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.200842] e820: reserve RAM buffer [mem 0x43f800000-0x43fffffff]
[    0.200855] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.200855] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.200855] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.200855] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.200855] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.200855] vgaarb: loaded
[    0.202215] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.202226] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.203807] clocksource: Switched to clocksource tsc-early
[    0.215273] VFS: Disk quotas dquot_6.6.0
[    0.215294] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.215366] pnp: PnP ACPI init
[    0.215548] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.215553] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.215555] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.215557] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.215560] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.215718] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.215984] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.215987] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.215989] system 00:04: [io  0x1180-0x119f] has been reserved
[    0.215990] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.215993] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.215995] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.215997] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.216000] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.216083] system 00:05: [io  0x0454-0x0457] has been reserved
[    0.216326] pnp: PnP ACPI: found 6 devices
[    0.222431] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.222518] NET: Registered PF_INET protocol family
[    0.222713] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.227028] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.227068] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.227153] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.227414] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.227535] TCP: Hash tables configured (established 131072 bind 65536)
[    0.227632] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.227725] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.227822] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.227906] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.227913] NET: Registered PF_XDP protocol family
[    0.227929] pci 0000:01:00.1: BAR 0: assigned [mem 0xfb080000-0xfb083fff]
[    0.227936] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.227938] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.227941] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.227944] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[    0.227948] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.227959] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.227970] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.227981] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.227984] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.227991] pci 0000:00:1c.5:   bridge window [mem 0xe2100000-0xe21fffff 64bit pref]
[    0.227998] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.228000] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.228002] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.228003] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.228005] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.228006] pci_bus 0000:00: resource 9 [mem 0xbfa00000-0xffffffff window]
[    0.228008] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.228010] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
[    0.228011] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[    0.228014] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.228015] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe21fffff 64bit pref]
[    0.228101] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.228441] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.228476] PCI: CLS 64 bytes, default 64
[    0.228481] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.228482] software IO TLB: mapped [mem 0x00000000b6c08000-0x00000000bac08000] (64MB)
[    0.228532] Trying to unpack rootfs image as initramfs...
[    0.232398] Initialise system trusted keyrings
[    0.232416] Key type blacklist registered
[    0.232468] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.233996] zbud: loaded
[    0.234209] integrity: Platform Keyring initialized
[    0.234216] integrity: Machine keyring initialized
[    0.245469] Key type asymmetric registered
[    0.245473] Asymmetric key parser 'x509' registered
[    0.297906] Freeing initrd memory: 14816K
[    0.300720] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.300746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.300783] io scheduler mq-deadline registered
[    0.300785] io scheduler kyber registered
[    0.300829] io scheduler bfq registered
[    0.301276] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[    0.301463] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[    0.301633] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26
[    0.301804] pcieport 0000:00:1c.3: PME: Signaling with IRQ 27
[    0.301962] pcieport 0000:00:1c.5: PME: Signaling with IRQ 28
[    0.302045] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.302335] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.302360] ACPI: button: Power Button [PWRB]
[    0.302393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.302483] ACPI: button: Power Button [PWRF]
[    0.303420] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.303619] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.305462] Non-volatile memory driver v1.3
[    0.305463] Linux agpgart interface v0.103
[    0.305465] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.305865] ahci 0000:00:1f.2: version 3.0
[    0.305999] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.306004] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    0.310265] scsi host0: ahci
[    0.310432] scsi host1: ahci
[    0.310547] scsi host2: ahci
[    0.310639] scsi host3: ahci
[    0.310675] ata1: SATA max UDMA/133 abar m2048@0xfb805000 port 0xfb805100 irq 29
[    0.310679] ata2: SATA max UDMA/133 abar m2048@0xfb805000 port 0xfb805180 irq 29
[    0.310680] ata3: DUMMY
[    0.310681] ata4: DUMMY
[    0.310727] ACPI: bus type drm_connector registered
[    0.310832] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.310835] ehci-pci: EHCI PCI platform driver
[    0.310936] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.310943] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.310954] ehci-pci 0000:00:1a.0: debug port 2
[    0.314866] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb807000
[    0.321779] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.321858] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[    0.321862] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.321864] usb usb1: Product: EHCI Host Controller
[    0.321865] usb usb1: Manufacturer: Linux 6.0.9-zen1-1-zen ehci_hcd
[    0.321867] usb usb1: SerialNumber: 0000:00:1a.0
[    0.322063] hub 1-0:1.0: USB hub found
[    0.322074] hub 1-0:1.0: 2 ports detected
[    0.322297] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.322303] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.322314] ehci-pci 0000:00:1d.0: debug port 2
[    0.326215] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb806000
[    0.332781] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.332852] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[    0.332856] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.332858] usb usb2: Product: EHCI Host Controller
[    0.332859] usb usb2: Manufacturer: Linux 6.0.9-zen1-1-zen ehci_hcd
[    0.332861] usb usb2: SerialNumber: 0000:00:1d.0
[    0.333057] hub 2-0:1.0: USB hub found
[    0.333067] hub 2-0:1.0: 2 ports detected
[    0.333203] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.333209] ohci-pci: OHCI PCI platform driver
[    0.333220] uhci_hcd: USB Universal Host Controller Interface driver
[    0.333255] usbcore: registered new interface driver usbserial_generic
[    0.333260] usbserial: USB Serial support registered for generic
[    0.333417] rtc_cmos 00:02: RTC can wake from S4
[    0.333835] rtc_cmos 00:02: registered as rtc0
[    0.333894] rtc_cmos 00:02: setting system clock to 2022-11-20T08:04:07 UTC (1668931447)
[    0.333917] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.334146] intel_pstate: Intel P-state driver initializing
[    0.334446] ledtrig-cpu: registered to indicate activity on CPUs
[    0.334603] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    0.334605] vesafb: scrolling: redraw
[    0.334606] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.334620] vesafb: framebuffer at 0xc0000000, mapped to 0x(____ptrval____), using 5120k, total 5120k
[    0.334664] fbcon: Deferring console take-over
[    0.334665] fb0: VESA VGA frame buffer device
[    0.334682] hid: raw HID events driver (C) Jiri Kosina
[    0.334765] drop_monitor: Initializing network drop monitor service
[    0.346221] Initializing XFRM netlink socket
[    0.346358] NET: Registered PF_INET6 protocol family
[    0.349514] Segment Routing with IPv6
[    0.349518] RPL Segment Routing with IPv6
[    0.349531] In-situ OAM (IOAM) with IPv6
[    0.349554] NET: Registered PF_PACKET protocol family
[    0.349875] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[    0.349931] microcode: Microcode Update Driver: v2.2.
[    0.349936] IPI shorthand broadcast: enabled
[    0.349956] sched_clock: Marking stable (349456886, 299858)->(581318628, -231561884)
[    0.350180] registered taskstats version 1
[    0.350260] Loading compiled-in X.509 certificates
[    0.353445] Loaded X.509 cert 'Build time autogenerated kernel key: 9fde712a0203ea429fd2147ac08d4c3a0e4e4e90'
[    0.353755] zswap: loaded using pool lz4/z3fold
[    0.354093] Key type .fscrypt registered
[    0.354095] Key type fscrypt-provisioning registered
[    0.355423] PM:   Magic number: 14:892:68
[    0.355473] memory memory96: hash matches
[    0.355580] RAS: Correctable Errors collector initialized.
[    0.560789] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.568780] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.620788] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.620814] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.622074] ata1.00: ATA-8: ST31000524AS, JC4A, max UDMA/133
[    0.622081] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32)
[    0.623603] ata1.00: configured for UDMA/133
[    0.623894] scsi 0:0:0:0: Direct-Access     ATA      ST31000524AS     JC4A PQ: 0 ANSI: 5
[    0.624605] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    0.624622] sd 0:0:0:0: [sda] Write Protect is off
[    0.624626] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.624646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.624672] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    0.631724] ata2.00: ATAPI: HL-DT-ST DVDRW/BDROM CT30N, A201, max UDMA/133
[    0.635711] ata2.00: configured for UDMA/133
[    0.641085] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRWBD CT30N    A201 PQ: 0 ANSI: 5
[    0.690544] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    0.690549] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.690971] hub 1-1:1.0: USB hub found
[    0.691156] hub 1-1:1.0: 4 ports detected
[    0.697187] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    0.697196] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.697474] hub 2-1:1.0: USB hub found
[    0.697545] hub 2-1:1.0: 6 ports detected
[    0.792729]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 >
[    0.793401] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.794840] Freeing unused decrypted memory: 2036K
[    0.795189] Freeing unused kernel image (initmem) memory: 2136K
[    0.798897] Write protecting the kernel read-only data: 32768k
[    0.799407] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    0.799547] Freeing unused kernel image (rodata/data gap) memory: 1036K
[    0.812912] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.812916] rodata_test: all tests were successful
[    0.812928] Run /init as init process
[    0.812929]   with arguments:
[    0.812931]     /init
[    0.812932]   with environment:
[    0.812933]     HOME=/
[    0.812934]     TERM=linux
[    0.812934]     BOOT_IMAGE=/boot/vmlinuz-linux-zen
[    0.825507] fbcon: Taking over console
[    0.825580] Console: switching to colour frame buffer device 160x64
[    0.966750] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    0.966778] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.016232] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.016239] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.035611] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.047806] usb 2-1.3: New USB device found, idVendor=2357, idProduct=0138, bcdDevice= 2.10
[    1.047814] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.047818] usb 2-1.3: Product: 802.11ac NIC
[    1.047820] usb 2-1.3: Manufacturer: Realtek
[    1.047822] usb 2-1.3: SerialNumber: 123456
[    1.048553] usb 1-1.1: New USB device found, idVendor=0408, idProduct=3008, bcdDevice= 2.04
[    1.048556] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[    1.048558] usb 1-1.1: Product: OpticalTouchScreen
[    1.048559] usb 1-1.1: Manufacturer: Quanta
[    1.048560] usb 1-1.1: SerialNumber: 0000
[    1.111750] usb 2-1.5: new low-speed USB device number 4 using ehci-pci
[    1.113743] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[    1.193432] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0139, bcdDevice=39.60
[    1.193448] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.193452] usb 1-1.2: Product: USB2.0-CRW
[    1.193454] usb 1-1.2: Manufacturer: Generic
[    1.193456] usb 1-1.2: SerialNumber: 20100201396000000
[    1.201602] usb 2-1.5: New USB device found, idVendor=04d9, idProduct=0499, bcdDevice= 2.90
[    1.201610] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.246770] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    1.246781] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[    1.246830] clocksource: Switched to clocksource tsc
[    1.257771] usb 1-1.3: new full-speed USB device number 5 using ehci-pci
[    1.266748] usb 2-1.6: new low-speed USB device number 5 using ehci-pci
[    1.340226] usb 1-1.3: New USB device found, idVendor=8086, idProduct=0189, bcdDevice=69.19
[    1.340234] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.352092] usb 2-1.6: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
[    1.352098] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.352101] usb 2-1.6: Product: USB Keyboard
[    1.352103] usb 2-1.6: Manufacturer: SEM
[    1.363298] input: Quanta OpticalTouchScreen Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0408:3008.0001/input/input2
[    1.363410] input: Quanta OpticalTouchScreen Touchscreen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0408:3008.0001/input/input3
[    1.363550] hid-generic 0003:0408:3008.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [Quanta OpticalTouchScreen] on usb-0000:00:1a.0-1.1/input0
[    1.371139] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:04D9:0499.0002/input/input4
[    1.371230] hid-generic 0003:04D9:0499.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-1.5/input0
[    1.373876] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:1A2C:2124.0003/input/input5
[    1.404758] usb 1-1.4: new high-speed USB device number 6 using ehci-pci
[    1.426025] hid-generic 0003:1A2C:2124.0003: input,hidraw2: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[    1.428559] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:1A2C:2124.0004/input/input6
[    1.479951] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:1A2C:2124.0004/input/input7
[    1.480121] hid-generic 0003:1A2C:2124.0004: input,hidraw3: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[    1.480171] usbcore: registered new interface driver usbhid
[    1.480173] usbhid: USB HID core driver
[    1.614457] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b2a8, bcdDevice=52.70
[    1.614472] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.614476] usb 1-1.4: Product: Laptop_Integrated_Webcam_HD
[    1.614478] usb 1-1.4: Manufacturer: CNFA1B1F30401789D832
[    1.614480] usb 1-1.4: SerialNumber: SN0006
[    1.796095] usbcore: registered new interface driver rtsx_usb
[    1.808531] input: Quanta OpticalTouchScreen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0408:3008.0001/input/input9
[    1.808614] hid-multitouch 0003:0408:3008.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [Quanta OpticalTouchScreen] on usb-0000:00:1a.0-1.1/input0
[    2.253395] random: crng init done
[    2.885974] EXT4-fs (sda13): mounted filesystem with ordered data mode. Quota mode: none.
[    4.580905] systemd[1]: systemd 252.1-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    4.580916] systemd[1]: Detected architecture x86-64.
[    4.623449] systemd[1]: Hostname set to <hikmateustad-dell>.
[   10.552221] systemd[1]: Queued start job for default target Graphical Interface.
[   10.564226] systemd[1]: Created slice Virtual Machine and Container Slice.
[   10.565085] systemd[1]: Created slice Slice /system/getty.
[   10.565572] systemd[1]: Created slice Slice /system/modprobe.
[   10.565928] systemd[1]: Created slice User and Session Slice.
[   10.566035] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   10.566124] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.566365] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.566407] systemd[1]: Reached target Local Encrypted Volumes.
[   10.566438] systemd[1]: Reached target Login Prompts.
[   10.566463] systemd[1]: Reached target Local Integrity Protected Volumes.
[   10.566513] systemd[1]: Reached target Path Units.
[   10.566547] systemd[1]: Reached target Remote File Systems.
[   10.566570] systemd[1]: Reached target Slice Units.
[   10.566600] systemd[1]: Reached target Swaps.
[   10.566636] systemd[1]: Reached target Local Verity Protected Volumes.
[   10.566775] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   10.575975] systemd[1]: Listening on LVM2 poll daemon socket.
[   10.577838] systemd[1]: Listening on Process Core Dump Socket.
[   10.617931] systemd[1]: Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit).
[   10.635096] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.635295] systemd[1]: Listening on Journal Socket.
[   10.636059] systemd[1]: Listening on Network Service Netlink Socket.
[   10.636592] systemd[1]: Listening on udev Control Socket.
[   10.636728] systemd[1]: Listening on udev Kernel Socket.
[   10.648939] systemd[1]: Mounting /dev/hugepages...
[   10.650181] systemd[1]: Mounting POSIX Message Queue File System...
[   10.651244] systemd[1]: Mounting Kernel Debug File System...
[   10.652437] systemd[1]: Mounting Kernel Trace File System...
[   10.708938] systemd[1]: Mounting Temporary Directory /tmp...
[   10.709163] systemd[1]: Load AppArmor profiles was skipped because of an unmet condition check (ConditionSecurity=apparmor).
[   10.729885] systemd[1]: Starting Create List of Static Device Nodes...
[   10.730552] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   10.731622] systemd[1]: Starting Load Kernel Module configfs...
[   10.732601] systemd[1]: Starting Load Kernel Module drm...
[   10.733465] systemd[1]: Starting Load Kernel Module fuse...
[   10.733699] systemd[1]: OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
[   10.733803] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[   10.735301] systemd[1]: Starting Journal Service...
[   10.792340] fuse: init (API version 7.36)
[   10.905024] systemd[1]: Starting Load Kernel Modules...
[   10.906384] systemd[1]: Starting Remount Root and Kernel File Systems...
[   10.906482] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[   10.907655] systemd[1]: Starting Coldplug All udev Devices...
[   10.910345] systemd[1]: Mounted POSIX Message Queue File System.
[   10.910534] systemd[1]: Mounted Kernel Debug File System.
[   10.910679] systemd[1]: Mounted Kernel Trace File System.
[   10.910828] systemd[1]: Mounted Temporary Directory /tmp.
[   10.911168] systemd[1]: Finished Create List of Static Device Nodes.
[   10.913420] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   10.913575] systemd[1]: Finished Load Kernel Module configfs.
[   10.913852] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   10.913979] systemd[1]: Finished Load Kernel Module drm.
[   10.914229] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   10.914359] systemd[1]: Finished Load Kernel Module fuse.
[   10.951250] EXT4-fs (sda13): re-mounted. Quota mode: none.
[   10.956900] systemd[1]: Mounting FUSE Control File System...
[   10.957670] systemd[1]: Mounting Kernel Configuration File System...
[   10.958947] systemd[1]: Started Journal Service.
[   10.993792] acpi_call: loading out-of-tree module taints kernel.
[   10.993825] acpi_call: module verification failed: signature and/or required key missing - tainting kernel
[   11.060810] systemd-journald[246]: Received client request to flush runtime journal.
[   11.243363] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.243419] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   11.411710] i2c_dev: i2c /dev entries driver
[   11.566191] device-mapper: uevent: version 1.0.3
[   11.566351] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[   11.770214] Asymmetric key parser 'pkcs8' registered
[   12.953248] loop: module loaded
[   12.953923] loop1: detected capacity change from 0 to 113680
[   12.953925] loop2: detected capacity change from 0 to 8
[   12.953926] loop0: detected capacity change from 0 to 226912
[   12.991576] loop3: detected capacity change from 0 to 113696
[   12.992794] loop4: detected capacity change from 0 to 126752
[   12.996402] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   13.015480] loop5: detected capacity change from 0 to 126760
[   13.026957] loop6: detected capacity change from 0 to 337424
[   13.028305] loop7: detected capacity change from 0 to 448512
[   13.116607] loop8: detected capacity change from 0 to 509456
[   13.117715] loop9: detected capacity change from 0 to 133552
[   13.118807] loop10: detected capacity change from 0 to 40
[   13.158588] loop11: detected capacity change from 0 to 1352552
[   13.159679] loop12: detected capacity change from 0 to 111080
[   16.334098] acpi PNP0C14:00: duplicate WMI GUID 02314822-307C-4F66-BF0E-48AEAEB26CC8 (first instance was on PNP0C14:00)
[   16.334104] acpi PNP0C14:00: duplicate WMI GUID 02314822-307C-4F66-BF0E-48AEAEB26CC8 (first instance was on PNP0C14:00)
[   16.334107] acpi PNP0C14:00: duplicate WMI GUID 02314822-307C-4F66-BF0E-48AEAEB26CC8 (first instance was on PNP0C14:00)
[   16.334108] acpi PNP0C14:00: duplicate WMI GUID 02314822-307C-4F66-BF0E-48AEAEB26CC8 (first instance was on PNP0C14:00)
[   16.334110] acpi PNP0C14:00: duplicate WMI GUID 02314822-307C-4F66-BF0E-48AEAEB26CC8 (first instance was on PNP0C14:00)
[   16.343162] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   16.343168] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   16.343169] RAPL PMU: hw unit of domain package 2^-16 Joules
[   16.343170] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   16.361044] cryptd: max_cpu_qlen set to 1000
[   16.393635] AVX version of gcm_enc/dec engaged.
[   16.393658] AES CTR mode by8 optimization enabled
[   16.925284] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000050C-0x000000000000050F (\_SB.GPI0) (20220331/utaddress-204)
[   16.925294] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000050C-0x000000000000050F (\_SB.GPIO) (20220331/utaddress-204)
[   16.925297] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   17.227983] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   17.229936] i2c i2c-0: 2/2 memory slots populated (from DMI)
[   17.230274] i2c i2c-0: Successfully instantiated SPD at 0x50
[   17.388342] input: Dell AIO WMI hotkeys as /devices/virtual/input/input10
[   17.573919] gpio_ich gpio_ich.4.auto: GPIO from 948 to 1023
[   17.647784] at24 0-0050: supply vcc not found, using dummy regulator
[   17.648413] at24 0-0050: 256 byte spd EEPROM, read-only
[   17.658673] intel_rapl_common: Found RAPL domain package
[   17.658679] intel_rapl_common: Found RAPL domain core
[   17.658680] intel_rapl_common: Found RAPL domain uncore
[   17.873538] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[   17.873575] snd_hda_intel 0000:01:00.1: Disabling MSI
[   17.873580] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   18.355577] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl, 00:21:70:62:6a:62, XID 2c9, IRQ 31
[   18.355585] r8169 0000:05:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   18.445375] r8169 0000:05:00.0 enp5s0: renamed from eth0
[   18.475970] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   18.476017] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   18.476060] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   18.476099] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   19.392421] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[   19.393897] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   19.394246] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   19.668708] Console: switching to colour dummy device 80x25
[   19.668747] i915 0000:00:02.0: vgaarb: deactivate vga console
[   19.683735] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[   19.683910] ACPI: video: Video Device [VGA] (multi-head: no  rom: yes  post: no)
[   19.684015] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input15
[   19.684100] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   19.684179] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input16
[   19.684237] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   19.726126] NET: Registered PF_ALG protocol family
[   19.801639] fbcon: i915drmfb (fb0) is primary device
[   19.905685] Console: switching to colour frame buffer device 240x67
[   19.925909] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[   20.979877] snd_hda_codec_realtek hdaudioC0D0: ALC269VC: SKU not ready 0x598301f0
[   20.980361] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:line
[   20.980368] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   20.980371] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   20.980375] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   20.980377] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   20.980379] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   20.980381] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   20.980384] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   20.988009] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   20.988066] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   20.988128] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   24.612520] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC)
[   24.776382] r8169 0000:05:00.0 enp5s0: Link is Down
[   28.732464] r8169 0000:05:00.0 enp5s0: Link is Up - 100Mbps/Full - flow control rx/tx
[   28.732485] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[   31.341093] Bluetooth: Core ver 2.22
[   31.341122] NET: Registered PF_BLUETOOTH protocol family
[   31.341123] Bluetooth: HCI device and connection manager initialized
[   31.341128] Bluetooth: HCI socket layer initialized
[   31.341130] Bluetooth: L2CAP socket layer initialized
[   31.341134] Bluetooth: SCO socket layer initialized
[   31.566217] usbcore: registered new interface driver btusb
[   33.314452] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   33.336788] mc: Linux media interface: v0.10
[   33.382657] videodev: Linux video capture interface: v2.00
[   33.472946] usb 1-1.4: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (04f2:b2a8)
[   33.763810] input: Laptop_Integrated_Webcam_HD: In as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input20
[   33.763893] usbcore: registered new interface driver uvcvideo
[   34.530474] rtw_8822bu 2-1.3:1.0: Firmware version 27.2.0, H2C version 13
[   34.708586] usbcore: registered new interface driver rtw_8822bu
[   35.380233] RTW: module init start
[   35.380239] RTW: rtl88x2bu v5.13.1-20-gbd7c7eb9d.20210702_COEX20210316-18317b7b
[   35.380240] RTW: rtl88x2bu BT-Coex version = COEX20210316-18317b7b
[   35.750431] usbcore: registered new interface driver rtl88x2bu
[   35.750436] RTW: module init ret=0
[   40.360753] r8169 0000:05:00.0: invalid VPD tag 0xff (size 0) at offset 0; assume missing optional EEPROM
[   76.083850] uvcvideo 1-1.4:1.1: Failed to query (130) UVC probe control : -32 (exp. 26).
[   81.430760] rtw_8822bu 2-1.3:1.0: Err sending rx data urb -1
[   87.529659] wlan0: authenticate with 98:de:d0:22:cf:dc
[   87.535172] wlan0: bad VHT capabilities, disabling VHT
[   88.106648] wlan0: send auth to 98:de:d0:22:cf:dc (try 1/3)
[   88.108811] wlan0: authenticated
[   88.144179] wlan0: associate with 98:de:d0:22:cf:dc (try 1/3)
[   88.148056] wlan0: RX AssocResp from 98:de:d0:22:cf:dc (capab=0x431 status=0 aid=4)
[   88.154010] wlan0: associated
[   88.185432] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  109.964101] r8169 0000:05:00.0 enp5s0: Link is Down
[  212.930632] wlan0: deauthenticating from 98:de:d0:22:cf:dc by local choice (Reason: 3=DEAUTH_LEAVING)
[  213.200783] rtw_8822bu 2-1.3:1.0: error beacon valid
[  213.200797] rtw_8822bu 2-1.3:1.0: failed to download rsvd page
[  213.201021] rtw_8822bu 2-1.3:1.0: failed to download firmware
[  349.355869] pcieport 0000:00:1c.5: PME: Spurious native interrupt!
[  349.566486] r8169 0000:05:00.0 enp5s0: Link is Down
[  351.075765] r8169 0000:05:00.0 enp5s0: Link is Up - 100Mbps/Full - flow control rx/tx
[  519.161612] rtw_8822bu 2-1.3:1.0: error beacon valid
[  519.161634] rtw_8822bu 2-1.3:1.0: failed to download rsvd page
[  519.161854] rtw_8822bu 2-1.3:1.0: failed to download firmware
[  820.672722] rtw_8822bu 2-1.3:1.0: error beacon valid
[  820.672743] rtw_8822bu 2-1.3:1.0: failed to download rsvd page
[  820.672963] rtw_8822bu 2-1.3:1.0: failed to download firmware
[ 1001.527093] rtw_drv_log_level:5
[ 1121.678626] rtw_8822bu 2-1.3:1.0: error beacon valid
[ 1121.678650] rtw_8822bu 2-1.3:1.0: failed to download rsvd page
[ 1121.678952] rtw_8822bu 2-1.3:1.0: failed to download firmware
[ 1422.676701] rtw_8822bu 2-1.3:1.0: error beacon valid
[ 1422.676722] rtw_8822bu 2-1.3:1.0: failed to download rsvd page
[ 1422.676946] rtw_8822bu 2-1.3:1.0: failed to download firmware
[ 1723.677939] rtw_8822bu 2-1.3:1.0: error beacon valid
[ 1723.677960] rtw_8822bu 2-1.3:1.0: failed to download rsvd page
[ 1723.678179] rtw_8822bu 2-1.3:1.0: failed to download firmware
[ 1724.433496] ntfs3: Max link count 4000
[ 1724.433500] ntfs3: Enabled Linux POSIX ACLs support
[ 1724.433501] ntfs3: Read-only LZX/Xpress compression included
[ 1724.433901] ntfs3: Unknown parameter 'windows_names'
[ 2024.679430] rtw_8822bu 2-1.3:1.0: error beacon valid
[ 2024.679453] rtw_8822bu 2-1.3:1.0: failed to download rsvd page
[ 2024.679670] rtw_8822bu 2-1.3:1.0: failed to download firmware
[ 2326.681536] rtw_8822bu 2-1.3:1.0: error beacon valid
[ 2326.681558] rtw_8822bu 2-1.3:1.0: failed to download rsvd page
[ 2326.681777] rtw_8822bu 2-1.3:1.0: failed to download firmware
[ 2627.690063] rtw_8822bu 2-1.3:1.0: error beacon valid
[ 2627.690098] rtw_8822bu 2-1.3:1.0: failed to download rsvd page
[ 2627.690429] rtw_8822bu 2-1.3:1.0: failed to download firmware
[ 2928.694889] rtw_8822bu 2-1.3:1.0: error beacon valid
[ 2928.694911] rtw_8822bu 2-1.3:1.0: failed to download rsvd page
[ 2928.695129] rtw_8822bu 2-1.3:1.0: failed to download firmware

How do I resolve?

Thanks in advance for your time.

Last edited by hikmateustad (2023-12-01 16:26:04)

Offline

#2 2022-11-20 09:12:43

Grigorios
Member
Registered: 2021-01-10
Posts: 23

Re: Cannot connect to WiFi with TP-Link Archer T3U Plus AC 1300 [Solved]

Are you using the networkmanager cli? If not try

$nmcli device wifi rescan && nmcli device wifi list

and see whether that gives you something.
My guess is, that is's maybe GUI not working.

Greetings

Grigorios

Offline

#3 2022-11-20 09:43:12

hikmateustad
Member
Registered: 2022-01-23
Posts: 17

Re: Cannot connect to WiFi with TP-Link Archer T3U Plus AC 1300 [Solved]

Hello Grigorios

I am using the Network Manager GUI which I use for my ethernet configuration. Wireless does not show up.

Network Manager CLI does not return anything

hikmateustad@hikmateustad-dell ~ % nmcli device wifi rescan && nmcli device wifi list     
IN-USE  BSSID  SSID  MODE  CHAN  RATE  SIGNAL  BARS  SECURITY 

Offline

#4 2022-11-20 10:25:33

hikmateustad
Member
Registered: 2022-01-23
Posts: 17

Re: Cannot connect to WiFi with TP-Link Archer T3U Plus AC 1300 [Solved]

Well following Grigorios's lead I reinstalled the dkms drivers and without rebooting ran the network manager cli command and now the wireless networks showup.

hikmateustad@hikmateustad-dell ~ % yay -S rtl88x2bu-dkms-git
[sudo] password for hikmateustad: 
warning: rtl88x2bu-dkms-git-5.13.1.r176.0c8f2cf-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...

Packages (1) rtl88x2bu-dkms-git-5.13.1.r176.0c8f2cf-1

Total Installed Size:  27.26 MiB
Net Upgrade Size:       0.00 MiB

:: Proceed with installation? [Y/n] 
(1/1) checking keys in keyring                                                                                                                [---------------------------------------------------------------------------------------] 100%
(1/1) checking package integrity                                                                                                              [---------------------------------------------------------------------------------------] 100%
(1/1) loading package files                                                                                                                   [---------------------------------------------------------------------------------------] 100%
(1/1) checking for file conflicts                                                                                                             [---------------------------------------------------------------------------------------] 100%
:: Running pre-transaction hooks...
(1/1) Remove upgraded DKMS modules
==> dkms remove --no-depmod rtl88x2bu/5.13.1.r176.0c8f2cf -k 6.0.9-zen1-1-zen
:: Processing package changes...
(1/1) reinstalling rtl88x2bu-dkms-git                                                                                                         [---------------------------------------------------------------------------------------] 100%
:: Running post-transaction hooks...
(1/3) Arming ConditionNeedsUpdate...
(2/3) Install DKMS modules
==> dkms install --no-depmod rtl88x2bu/5.13.1.r176.0c8f2cf -k 6.0.9-zen1-1-zen
==> depmod 6.0.9-zen1-1-zen
(3/3) Refreshing PackageKit...
yay -S rtl88x2bu-dkms-git  307.07s user 23.92s system 253% cpu 2:10.69 total
hikmateustad@hikmateustad-dell ~ % nmcli device wifi rescan && nmcli device wifi list
IN-USE  BSSID              SSID       MODE   CHAN  RATE        SIGNAL  BARS  SECURITY  
        98:DE:D0:22:CF:DC  F    Infra  6     135 Mbit/s  75      ▂▄▆_  WPA2      
        64:70:02:70:0E:06  A     Infra  11    405 Mbit/s  47      ▂▄__  WPA2      
        34:0A:33:83:2B:97  N  Infra  1     270 Mbit/s  37      ▂▄__  WPA2      
        34:0A:33:84:92:1E  G      Infra  11    270 Mbit/s  24      ▂___  WPA1 WPA2 
        BC:0F:9A:21:4E:CC  S    Infra  13    270 Mbit/s  20      ▂___  WPA2      

Now I can at least superficially connect to the wireless network through the network manager GUI. I do not know the commands to connect through nmcli
Grigorios need your help for the commands

But

  1. Does that mean I would have to reinstall drivers everytime I login?

  2. If i remove my ethernet adapter I do not get any network connectivity even though it appears to have connected to my wireless network. There is a yellow exclamation mark on the wireless icon in network manager GUI which reads limited connectivity

  3. If I disconnect from the wireless network once, i get the same empty list while issuing the nmcli device wifi rescan && nmcli device wifi list
    command

  4. reinstalling the rtl88x2bu-dkms-git-5.13.1.r176.0c8f2cf-1 does not help[*/]

Which means the problem has not been resolved.

What should I try next?

Offline

#5 2022-11-20 11:54:46

progandy
Member
Registered: 2012-05-17
Posts: 5,184

Re: Cannot connect to WiFi with TP-Link Archer T3U Plus AC 1300 [Solved]

I think you are currently not using the dkms driver at all. Since kernel 5.18 there is experimental support for that card in the rtw88 driver. You'll have to blacklist that if you need the dkms driver.

https://github.com/RinCat/RTL88x2BU-Lin … w88-driver

Last edited by progandy (2022-11-20 12:01:39)


| alias CUTF='LANG=en_XX.UTF-8@POSIX ' |

Offline

#6 2023-05-04 16:57:11

hikmateustad
Member
Registered: 2022-01-23
Posts: 17

Re: Cannot connect to WiFi with TP-Link Archer T3U Plus AC 1300 [Solved]

Thank you @progandy for your lead to blacklist the rtw88 driver, rebooted and reinstalled the dkms git driver to get excellent wireless internet.

Offline

Board footer

Powered by FluxBB