You are not logged in.
Hi, I'm new to the forum and I am not completely sure if this is the right place to post this issue, but here goes nothing.
I have just finished installing a root on zfs system with an UEFI partition and it went quite smoothly, I'm not new to this and I have had a couple of debian roots on zfs.
Everything is in order, the system boots fine and all but whenever I try to call grub-mkconfig this happens:
# sudo grub-mkconfig -o /boot/grub/grub.cfg
Generating grub configuration file ...
Traceback (most recent call last):
File "/etc/grub.d/05_zfs_linux.py", line 847, in <module>
for en in Generator().generate_grub_entries():
File "/etc/grub.d/05_zfs_linux.py", line 684, in generate_grub_entries
grub_entry = GrubLinuxEntry(
File "/etc/grub.d/05_zfs_linux.py", line 109, in __init__
self.linux_root_dataset = os.path.join(
File "/usr/lib/python3.10/posixpath.py", line 90, in join
genericpath._check_arg_types('join', a, *p)
File "/usr/lib/python3.10/genericpath.py", line 152, in _check_arg_types
raise TypeError(f'{funcname}() argument must be str, bytes, or '
TypeError: join() argument must be str, bytes, or os.PathLike object, not 'NoneType'
I have already tried to reinstall the grub package, reinstall grub on my ESP and commenting out the changes I made to the /etc/default/grub file but nothing changed.
I tried searching a bit but I found nothing and I cannot debug my self what is going on to be fair.
My system configuration is as follows:
# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
nvme0n1 259:0 0 476.9G 0 disk
├─nvme0n1p1 259:1 0 300M 0 part /boot
├─nvme0n1p2 259:2 0 7.8G 0 part [SWAP]
└─nvme0n1p3 259:3 0 468.8G 0 part
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
archroot 189G 268G 96K none
archroot/ROOT 13.0G 268G 96K none
archroot/ROOT/default 13.0G 268G 12.0G /
archroot/data 175G 268G 96K none
archroot/data/home 175G 268G 90.4G /home
As for the /etc/default/grub
# GRUB boot loader configuration
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
#GRUB_CMDLINE_LINUX_DEFAULT="pcie_acs_override=downstream,multifunction iommu=pt amd_iommu=on loglevel=3"
GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y
# Set to 'countdown' or 'hidden' to change timeout behavior,
# press ESC key to display menu.
GRUB_TIMEOUT_STYLE=menu
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `videoinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
# Uncomment to make GRUB remember the last selection. This requires
# setting 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT=true
# Uncomment to disable submenus in boot menu
#GRUB_DISABLE_SUBMENU=y
# Probing for other operating systems is disabled for security reasons. Read
# documentation on GRUB_DISABLE_OS_PROBER, if still want to enable this
# functionality install os-prober and uncomment to detect and include other
# operating systems.
#GRUB_DISABLE_OS_PROBER=false
Hope nothing is missing, feel free to ask for some more info.
Thanks everyone for your time!
Last edited by TMLKyza (2022-12-01 17:44:43)
Offline
Mod note: moving to AUR Issues
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Online
# lsblk -f
# cat /etc/fstab
<49,17,III,I> Fama di loro il mondo esser non lassa;
<50,17,III,I> misericordia e giustizia li sdegna:
<51,17,III,I> non ragioniam di lor, ma guarda e passa.
Offline
# lsblk -f
NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS
nvme0n1
├─nvme0n1p1 vfat FAT32 D66C-65D8 190.2M 36% /boot
├─nvme0n1p2 swap 1 43f8d7a0-1417-424a-8d90-d3649bb5580e [SWAP]
└─nvme0n1p3 zfs_member 5000 archroot 8420975920494737444
# cat /etc/fstab
# Static information about the filesystems.
# See fstab(5) for details.
# <file system> <dir> <type> <options> <dump> <pass>
# archroot/ROOT/default
#archroot/ROOT/default / zfs rw,nodev,xattr,posixacl 0 0
# archroot/data/home
#archroot/data/home /home zfs rw,nodev,xattr,posixacl 0 0
# /dev/nvme0n1p1
UUID=D66C-65D8 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro 0 2
# /dev/nvme0n1p2
UUID=43f8d7a0-1417-424a-8d90-d3649bb5580e none swap defaults 0 0
Offline
Maybe the script is expecting ESP to be on /boot/efi or /efi
Last edited by d.ALT (2022-12-01 17:30:30)
<49,17,III,I> Fama di loro il mondo esser non lassa;
<50,17,III,I> misericordia e giustizia li sdegna:
<51,17,III,I> non ragioniam di lor, ma guarda e passa.
Offline
Where is the ZFS python script from? Why do you think you need it?
Offline
Is there a way to verify this ? because 1st time I ran it there were no issues at all. Now something happened and I don't know what
Offline
Is there a way to verify this ? because 1st time I ran it there were no issues at all. Now something happened and I don't know what
Where is the ZFS python script from? Why do you think you need it?
\\\
Is there a way to verify this ? because 1st time I ran it there were no issues at all. Now something happened and I don't know what
I presume... If you hae a look at the sources of the script, there should be somewhere some indications of what's the path it needs. (please have a look at what V1del wrote)
<49,17,III,I> Fama di loro il mondo esser non lassa;
<50,17,III,I> misericordia e giustizia li sdegna:
<51,17,III,I> non ragioniam di lor, ma guarda e passa.
Offline
I don't know why but I assumed it had to do with zfs-dkms, instead is from zedenv-grub and I don't actually use it. So uninstalling it solved the issue. Many thanks
Last edited by TMLKyza (2022-12-01 17:40:57)
Offline