You are not logged in.
Hi All,
I recently noticed this error when I ran
$ sudo journalctl -p 3
kernel: x86/cpu: SGX disabled by BIOS.
kernel: ata1.00: exception Emask 0x0 SAct 0x7ee363cb SErr 0x40000 action 0x6 frozen
kernel: ata1: SError: { CommWake }
kernel: ata1.00: failed command: WRITE FPDMA QUEUED
kernel: ata1.00: cmd 61/08:00:40:08:60/00:00:01:00:00/40 tag 0 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
kernel: ata1.00: status: { DRDY }
kernel: ata1.00: failed command: WRITE FPDMA QUEUED
kernel: ata1.00: cmd 61/08:08:70:29:20/00:00:01:00:00/40 tag 1 ncq dma 4096 out
es 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)Going through Google and this forum, i got the gist that this has something to do with my SSD but it seemed fine as well. Here is the smartctl output(this output is after i ran a Long type self-test):
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.0.10-arch2-1] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: WD Blue / Red / Green SSDs
Device Model: WDC WDS240G2G0A-00JH30
Serial Number: 204728800392
LU WWN Device Id: 5 001b44 8be4be3cc
Firmware Version: UF870400
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Dec 3 22:56:27 2022 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 41) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 800
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1457
165 Block_Erase_Count 0x0032 100 100 000 Old_age Always - 2981
166 Minimum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 24
167 Max_Bad_Blocks_per_Die 0x0032 100 100 --- Old_age Always - 17
168 Maximum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 48
169 Total_Bad_Blocks 0x0032 100 100 --- Old_age Always - 85
170 Grown_Bad_Blocks 0x0032 100 100 --- Old_age Always - 0
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
173 Average_PE_Cycles_TLC 0x0032 100 100 000 Old_age Always - 24
174 Unexpected_Power_Loss 0x0032 100 100 000 Old_age Always - 218
184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0
194 Temperature_Celsius 0x0022 079 055 000 Old_age Always - 21 (Min/Max 12/55)
199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0
230 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0x083304500833
232 Available_Reservd_Space 0x0033 100 100 005 Pre-fail Always - 100
233 NAND_GB_Written_TLC 0x0032 100 100 --- Old_age Always - 6230
234 NAND_GB_Written_SLC 0x0032 100 100 000 Old_age Always - 20366
241 Host_Writes_GiB 0x0030 100 100 000 Old_age Offline - 6763
242 Host_Reads_GiB 0x0030 100 100 000 Old_age Offline - 4543
244 Temp_Throttle_Status 0x0032 000 100 --- Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 800 -
# 2 Extended offline Aborted by host 90% 798 -
# 3 Extended offline Aborted by host 90% 798 -
Selective Self-tests/Logging not supportedIt seems that all my attributes are under control but i don't understand why am i seeing error in the journalctl.
Any and every help is appreciated.
Last edited by dazai (2022-12-05 04:59:06)
Offline
Could it be the connection/cable rather than the sdd itself?
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline
Could it be the connection/cable rather than the sdd itself?
It's my laptop and i'm not sure about the details. I don't have much experience opening it up so i'll have to get it checked.
Offline
Nevermind, thanks for the help. A new patch update resolved the issue. I'm closing the ticket.
Offline